#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/ctype.h>
+#include <linux/etherdevice.h>
#include <linux/ethtool.h>
#include <linux/workqueue.h>
#include <linux/mii.h>
kfree(ctx);
}
+/* we need to override the usbnet change_mtu ndo for two reasons:
+ * - respect the negotiated maximum datagram size
+ * - avoid unwanted changes to rx and tx buffers
+ */
+int cdc_ncm_change_mtu(struct net_device *net, int new_mtu)
+{
+ struct usbnet *dev = netdev_priv(net);
+ struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0];
+ int maxmtu = ctx->max_datagram_size - cdc_ncm_eth_hlen(dev);
+
+ if (new_mtu <= 0 || new_mtu > maxmtu)
+ return -EINVAL;
+ net->mtu = new_mtu;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(cdc_ncm_change_mtu);
+
+static const struct net_device_ops cdc_ncm_netdev_ops = {
+ .ndo_open = usbnet_open,
+ .ndo_stop = usbnet_stop,
+ .ndo_start_xmit = usbnet_start_xmit,
+ .ndo_tx_timeout = usbnet_tx_timeout,
+ .ndo_change_mtu = cdc_ncm_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+};
+
int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8 data_altsetting, int drvflags)
{
struct cdc_ncm_ctx *ctx;
iface_no = ctx->data->cur_altsetting->desc.bInterfaceNumber;
- /* reset data interface */
+ /* Reset data interface. Some devices will not reset properly
+ * unless they are configured first. Toggle the altsetting to
+ * force a reset
+ */
+ usb_set_interface(dev->udev, iface_no, data_altsetting);
temp = usb_set_interface(dev->udev, iface_no, 0);
if (temp) {
dev_dbg(&intf->dev, "set interface failed\n");
if (cdc_ncm_init(dev))
goto error2;
+ /* Some firmwares need a pause here or they will silently fail
+ * to set up the interface properly. This value was decided
+ * empirically on a Sierra Wireless MC7455 running 02.08.02.00
+ * firmware.
+ */
+ usleep_range(10000, 20000);
+
/* configure data interface */
temp = usb_set_interface(dev->udev, iface_no, data_altsetting);
if (temp) {
/* add our sysfs attrs */
dev->net->sysfs_groups[0] = &cdc_ncm_sysfs_attr_group;
+ /* must handle MTU changes */
+ dev->net->netdev_ops = &cdc_ncm_netdev_ops;
+
return 0;
error2:
static int cdc_ncm_bind(struct usbnet *dev, struct usb_interface *intf)
{
- int ret;
-
/* MBIM backwards compatible function? */
if (cdc_ncm_select_altsetting(intf) != CDC_NCM_COMM_ALTSETTING_NCM)
return -ENODEV;
* Additionally, generic NCM devices are assumed to accept arbitrarily
* placed NDP.
*/
- ret = cdc_ncm_bind_common(dev, intf, CDC_NCM_DATA_ALTSETTING_NCM, 0);
-
- /*
- * We should get an event when network connection is "connected" or
- * "disconnected". Set network connection in "disconnected" state
- * (carrier is OFF) during attach, so the IP network stack does not
- * start IPv6 negotiation and more.
- */
- usbnet_link_change(dev, 0, 0);
- return ret;
+ return cdc_ncm_bind_common(dev, intf, CDC_NCM_DATA_ALTSETTING_NCM, 0);
}
static void cdc_ncm_align_tail(struct sk_buff *skb, size_t modulus, size_t remainder, size_t max)
static const struct driver_info cdc_ncm_info = {
.description = "CDC NCM",
- .flags = FLAG_POINTTOPOINT | FLAG_NO_SETINT | FLAG_MULTI_PACKET,
+ .flags = FLAG_POINTTOPOINT | FLAG_NO_SETINT | FLAG_MULTI_PACKET
+ | FLAG_LINK_INTR,
.bind = cdc_ncm_bind,
.unbind = cdc_ncm_unbind,
.manage_power = usbnet_manage_power,
static const struct driver_info wwan_info = {
.description = "Mobile Broadband Network Device",
.flags = FLAG_POINTTOPOINT | FLAG_NO_SETINT | FLAG_MULTI_PACKET
- | FLAG_WWAN,
+ | FLAG_LINK_INTR | FLAG_WWAN,
.bind = cdc_ncm_bind,
.unbind = cdc_ncm_unbind,
.manage_power = usbnet_manage_power,
static const struct driver_info wwan_noarp_info = {
.description = "Mobile Broadband Network Device (NO ARP)",
.flags = FLAG_POINTTOPOINT | FLAG_NO_SETINT | FLAG_MULTI_PACKET
- | FLAG_WWAN | FLAG_NOARP,
+ | FLAG_LINK_INTR | FLAG_WWAN | FLAG_NOARP,
.bind = cdc_ncm_bind,
.unbind = cdc_ncm_unbind,
.manage_power = usbnet_manage_power,
.driver_info = (unsigned long) &wwan_info,
},
+ /* DW5812 LTE Verizon Mobile Broadband Card
+ * Unlike DW5550 this device requires FLAG_NOARP
+ */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x413c, 0x81bb,
+ USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_NCM, USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long)&wwan_noarp_info,
+ },
+
+ /* DW5813 LTE AT&T Mobile Broadband Card
+ * Unlike DW5550 this device requires FLAG_NOARP
+ */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x413c, 0x81bc,
+ USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_NCM, USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long)&wwan_noarp_info,
+ },
+
/* Dell branded MBM devices like DW5550 */
{ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
| USB_DEVICE_ID_MATCH_VENDOR,