* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
-#include <linux/kernel.h>
-#include <linux/netdevice.h>
-#include <linux/sched.h>
-#include <linux/ieee80211.h>
-#include <linux/wireless.h>
-#include <linux/slab.h>
#include <linux/moduleparam.h>
#include <linux/if_arp.h>
struct net_device *ndev = wil_to_ndev(wil);
struct wireless_dev *wdev = wil->wdev;
- wil_dbg(wil, "%s()\n", __func__);
+ wil_dbg_misc(wil, "%s()\n", __func__);
wil_link_off(wil);
clear_bit(wil_status_fwconnected, &wil->status);
GFP_KERNEL);
break;
default:
- ;
+ break;
}
for (i = 0; i < ARRAY_SIZE(wil->vring_tx); i++)
wil_vring_fini_tx(wil, i);
+
+ clear_bit(wil_status_dontscan, &wil->status);
}
static void wil_disconnect_worker(struct work_struct *work)
{
struct wil6210_priv *wil = (void *)x;
- wil_dbg(wil, "Connect timeout\n");
+ wil_dbg_misc(wil, "Connect timeout\n");
/* reschedule to thread context - disconnect won't
* run from atomic context
schedule_work(&wil->disconnect_worker);
}
+static void wil_connect_worker(struct work_struct *work)
+{
+ int rc;
+ struct wil6210_priv *wil = container_of(work, struct wil6210_priv,
+ connect_worker);
+ int cid = wil->pending_connect_cid;
+
+ if (cid < 0) {
+ wil_err(wil, "No connection pending\n");
+ return;
+ }
+
+ wil_dbg_wmi(wil, "Configure for connection CID %d\n", cid);
+
+ rc = wil_vring_init_tx(wil, 0, WIL6210_TX_RING_SIZE, cid, 0);
+ wil->pending_connect_cid = -1;
+ if (rc == 0)
+ wil_link_on(wil);
+}
+
int wil_priv_init(struct wil6210_priv *wil)
{
- wil_dbg(wil, "%s()\n", __func__);
+ wil_dbg_misc(wil, "%s()\n", __func__);
mutex_init(&wil->mutex);
mutex_init(&wil->wmi_mutex);
wil->pending_connect_cid = -1;
setup_timer(&wil->connect_timer, wil_connect_timer_fn, (ulong)wil);
- INIT_WORK(&wil->wmi_connect_worker, wmi_connect_worker);
+ INIT_WORK(&wil->connect_worker, wil_connect_worker);
INIT_WORK(&wil->disconnect_worker, wil_disconnect_worker);
INIT_WORK(&wil->wmi_event_worker, wmi_event_worker);
return -EAGAIN;
}
- /* make shadow copy of registers that should not change on run time */
- wil_memcpy_fromio_32(&wil->mbox_ctl, wil->csr + HOST_MBOX,
- sizeof(struct wil6210_mbox_ctl));
- wil_mbox_ring_le2cpus(&wil->mbox_ctl.rx);
- wil_mbox_ring_le2cpus(&wil->mbox_ctl.tx);
-
return 0;
}
static void wil_target_reset(struct wil6210_priv *wil)
{
- wil_dbg(wil, "Resetting...\n");
+ wil_dbg_misc(wil, "Resetting...\n");
/* register write */
#define W(a, v) iowrite32(v, wil->csr + HOSTADDR(a))
W(RGF_USER_MAC_CPU_0, BIT(1)); /* mac_cpu_man_rst */
W(RGF_USER_USER_CPU_0, BIT(1)); /* user_cpu_man_rst */
- msleep(100);
-
W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0xFE000000);
W(RGF_USER_CLKS_CTL_SW_RST_VEC_1, 0x0000003F);
W(RGF_USER_CLKS_CTL_SW_RST_VEC_3, 0x00000170);
W(RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0xFFE7FC00);
- msleep(100);
-
W(RGF_USER_CLKS_CTL_SW_RST_VEC_3, 0);
W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0);
W(RGF_USER_CLKS_CTL_SW_RST_VEC_1, 0);
W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0x00000080);
W(RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0);
- msleep(2000);
-
- W(RGF_USER_USER_CPU_0, BIT(0)); /* user_cpu_man_de_rst */
-
- msleep(2000);
-
- wil_dbg(wil, "Reset completed\n");
+ wil_dbg_misc(wil, "Reset completed\n");
#undef W
#undef S
wil_err(wil, "Firmware not ready\n");
return -ETIME;
} else {
- wil_dbg(wil, "FW ready after %d ms\n",
- jiffies_to_msecs(to-left));
+ wil_dbg_misc(wil, "FW ready after %d ms\n",
+ jiffies_to_msecs(to-left));
}
return 0;
}
cancel_work_sync(&wil->disconnect_worker);
wil6210_disconnect(wil, NULL);
+ wil6210_disable_irq(wil);
+ wil->status = 0;
+
wmi_event_flush(wil);
- flush_workqueue(wil->wmi_wq);
flush_workqueue(wil->wmi_wq_conn);
-
- wil6210_disable_irq(wil);
- wil->status = 0;
+ flush_workqueue(wil->wmi_wq);
/* TODO: put MAC in reset */
wil_target_reset(wil);
wil->pending_connect_cid = -1;
INIT_COMPLETION(wil->wmi_ready);
- /* make shadow copy of registers that should not change on run time */
- wil_memcpy_fromio_32(&wil->mbox_ctl, wil->csr + HOST_MBOX,
- sizeof(struct wil6210_mbox_ctl));
- wil_mbox_ring_le2cpus(&wil->mbox_ctl.rx);
- wil_mbox_ring_le2cpus(&wil->mbox_ctl.tx);
-
/* TODO: release MAC reset */
wil6210_enable_irq(wil);
{
struct net_device *ndev = wil_to_ndev(wil);
- wil_dbg(wil, "%s()\n", __func__);
+ wil_dbg_misc(wil, "%s()\n", __func__);
netif_carrier_on(ndev);
netif_tx_wake_all_queues(ndev);
{
struct net_device *ndev = wil_to_ndev(wil);
- wil_dbg(wil, "%s()\n", __func__);
+ wil_dbg_misc(wil, "%s()\n", __func__);
netif_tx_stop_all_queues(ndev);
netif_carrier_off(ndev);
wmi_nettype = wil_iftype_nl2wmi(NL80211_IFTYPE_ADHOC);
switch (wdev->iftype) {
case NL80211_IFTYPE_STATION:
- wil_dbg(wil, "type: STATION\n");
+ wil_dbg_misc(wil, "type: STATION\n");
bi = 0;
ndev->type = ARPHRD_ETHER;
break;
case NL80211_IFTYPE_AP:
- wil_dbg(wil, "type: AP\n");
+ wil_dbg_misc(wil, "type: AP\n");
bi = 100;
ndev->type = ARPHRD_ETHER;
break;
case NL80211_IFTYPE_P2P_CLIENT:
- wil_dbg(wil, "type: P2P_CLIENT\n");
+ wil_dbg_misc(wil, "type: P2P_CLIENT\n");
bi = 0;
ndev->type = ARPHRD_ETHER;
break;
case NL80211_IFTYPE_P2P_GO:
- wil_dbg(wil, "type: P2P_GO\n");
+ wil_dbg_misc(wil, "type: P2P_GO\n");
bi = 100;
ndev->type = ARPHRD_ETHER;
break;
case NL80211_IFTYPE_MONITOR:
- wil_dbg(wil, "type: Monitor\n");
+ wil_dbg_misc(wil, "type: Monitor\n");
bi = 0;
ndev->type = ARPHRD_IEEE80211_RADIOTAP;
/* ARPHRD_IEEE80211 or ARPHRD_IEEE80211_RADIOTAP ? */
wil_err(wil, "SSID not set\n");
return -EINVAL;
}
- wmi_set_ssid(wil, wdev->ssid_len, wdev->ssid);
- if (channel)
- wmi_set_channel(wil, channel->hw_value);
+ rc = wmi_set_ssid(wil, wdev->ssid_len, wdev->ssid);
+ if (rc)
+ return rc;
break;
default:
- ;
+ break;
}
/* MAC address - pre-requisite for other commands */
wmi_set_mac_address(wil, ndev->dev_addr);
/* Set up beaconing if required. */
- rc = wmi_set_bcon(wil, bi, wmi_nettype);
- if (rc)
- return rc;
+ if (bi > 0) {
+ rc = wmi_pcp_start(wil, bi, wmi_nettype,
+ (channel ? channel->hw_value : 0));
+ if (rc)
+ return rc;
+ }
/* Rx VRING. After MAC and beacon */
wil_rx_init(wil);
projects / firefly-linux-kernel-4.4.55.git / blobdiff