*/
#include <linux/slab.h>
#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
#include <net/cfg80211.h>
#include <brcmu_wifi.h>
{
s32 ret = 0;
+ brcmf_fil_cmd_int_set(ifp, BRCMF_C_DOWN, 1);
brcmf_fil_iovar_int_set(ifp, "apsta", 1);
+ brcmf_fil_cmd_int_set(ifp, BRCMF_C_UP, 1);
/* In case of COB type, firmware has default mac address
* After Initializing firmware, we have to set current mac address to
* brcmf_p2p_generate_bss_mac() - derive mac addresses for P2P.
*
* @p2p: P2P specific data.
+ * @dev_addr: optional device address.
*
- * P2P needs mac addresses for P2P device and interface. These are
- * derived from the primary net device, ie. the permanent ethernet
- * address of the device.
+ * P2P needs mac addresses for P2P device and interface. If no device
+ * address it specified, these are derived from the primary net device, ie.
+ * the permanent ethernet address of the device.
*/
-static void brcmf_p2p_generate_bss_mac(struct brcmf_p2p_info *p2p)
+static void brcmf_p2p_generate_bss_mac(struct brcmf_p2p_info *p2p, u8 *dev_addr)
{
struct brcmf_if *pri_ifp = p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif->ifp;
- struct brcmf_if *p2p_ifp = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif->ifp;
+ bool local_admin = false;
+
+ if (!dev_addr || is_zero_ether_addr(dev_addr)) {
+ dev_addr = pri_ifp->mac_addr;
+ local_admin = true;
+ }
/* Generate the P2P Device Address. This consists of the device's
* primary MAC address with the locally administered bit set.
*/
- memcpy(p2p->dev_addr, pri_ifp->mac_addr, ETH_ALEN);
- p2p->dev_addr[0] |= 0x02;
- memcpy(p2p_ifp->mac_addr, p2p->dev_addr, ETH_ALEN);
+ memcpy(p2p->dev_addr, dev_addr, ETH_ALEN);
+ if (local_admin)
+ p2p->dev_addr[0] |= 0x02;
/* Generate the P2P Interface Address. If the discovery and connection
* BSSCFGs need to simultaneously co-exist, then this address must be
* different from the P2P Device Address, but also locally administered.
*/
memcpy(p2p->int_addr, p2p->dev_addr, ETH_ALEN);
+ p2p->int_addr[0] |= 0x02;
p2p->int_addr[4] ^= 0x80;
}
* validates the channels in the request.
*/
static s32 brcmf_p2p_run_escan(struct brcmf_cfg80211_info *cfg,
- struct net_device *ndev,
+ struct brcmf_if *ifp,
struct cfg80211_scan_request *request,
u16 action)
{
brcmf_p2p_stop_wait_next_action_frame(struct brcmf_cfg80211_info *cfg)
{
struct brcmf_p2p_info *p2p = &cfg->p2p;
- struct net_device *ndev = cfg->escan_info.ndev;
+ struct brcmf_if *ifp = cfg->escan_info.ifp;
if (test_bit(BRCMF_P2P_STATUS_SENDING_ACT_FRAME, &p2p->status) &&
(test_bit(BRCMF_P2P_STATUS_ACTION_TX_COMPLETED, &p2p->status) ||
* So abort scan for off channel completion.
*/
if (p2p->af_sent_channel)
- brcmf_notify_escan_complete(cfg, ndev, true, true);
+ brcmf_notify_escan_complete(cfg, ifp, true, true);
} else if (test_bit(BRCMF_P2P_STATUS_WAITING_NEXT_AF_LISTEN,
&p2p->status)) {
brcmf_dbg(TRACE, "*** Wake UP ** abort listen for next af frame\n");
/* So abort scan to cancel listen */
- brcmf_notify_escan_complete(cfg, ndev, true, true);
+ brcmf_notify_escan_complete(cfg, ifp, true, true);
}
}
CHSPEC_IS2G(chanspec) ?
IEEE80211_BAND_2GHZ :
IEEE80211_BAND_5GHZ);
- wdev = ifp->ndev->ieee80211_ptr;
+
+ wdev = &ifp->vif->wdev;
cfg80211_rx_mgmt(wdev, freq, 0, (u8 *)mgmt_frame, mgmt_frame_len,
GFP_ATOMIC);
struct brcmf_fil_af_params_le *af_params)
{
struct brcmf_p2p_info *p2p = &cfg->p2p;
+ struct brcmf_if *ifp = netdev_priv(ndev);
struct brcmf_fil_action_frame_le *action_frame;
struct brcmf_config_af_params config_af_params;
struct afx_hdl *afx_hdl = &p2p->afx_hdl;
/* To make sure to send successfully action frame, turn off mpc */
if (config_af_params.mpc_onoff == 0)
- brcmf_set_mpc(netdev_priv(ndev), 0);
+ brcmf_set_mpc(ifp, 0);
/* set status and destination address before sending af */
if (p2p->next_af_subtype != P2P_PAF_SUBTYPE_INVALID) {
* care of current piggback algo, lets abort the scan here
* itself.
*/
- brcmf_notify_escan_complete(cfg, ndev, true, true);
+ brcmf_notify_escan_complete(cfg, ifp, true, true);
/* update channel */
af_params->channel = cpu_to_le32(afx_hdl->peer_chan);
clear_bit(BRCMF_P2P_STATUS_WAITING_NEXT_ACT_FRAME, &p2p->status);
/* if all done, turn mpc on again */
if (config_af_params.mpc_onoff == 1)
- brcmf_set_mpc(netdev_priv(ndev), 1);
+ brcmf_set_mpc(ifp, 1);
return ack;
}
struct brcmf_cfg80211_info *cfg = ifp->drvr->config;
struct brcmf_p2p_info *p2p = &cfg->p2p;
struct afx_hdl *afx_hdl = &p2p->afx_hdl;
- struct wireless_dev *wdev;
struct brcmf_cfg80211_vif *vif = ifp->vif;
struct brcmf_rx_mgmt_data *rxframe = (struct brcmf_rx_mgmt_data *)data;
u16 chanspec = be16_to_cpu(rxframe->chanspec);
CHSPEC_IS2G(chanspec) ?
IEEE80211_BAND_2GHZ :
IEEE80211_BAND_5GHZ);
- wdev = ifp->ndev->ieee80211_ptr;
- cfg80211_rx_mgmt(wdev, freq, 0, mgmt_frame, mgmt_frame_len, GFP_ATOMIC);
+
+ cfg80211_rx_mgmt(&vif->wdev, freq, 0, mgmt_frame, mgmt_frame_len,
+ GFP_ATOMIC);
brcmf_dbg(INFO, "mgmt_frame_len (%d) , e->datalen (%d), chanspec (%04x), freq (%d)\n",
mgmt_frame_len, e->datalen, chanspec, freq);
p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = p2p_vif;
- brcmf_p2p_generate_bss_mac(p2p);
+ brcmf_p2p_generate_bss_mac(p2p, NULL);
+ memcpy(p2p_ifp->mac_addr, p2p->dev_addr, ETH_ALEN);
brcmf_p2p_set_firmware(pri_ifp, p2p->dev_addr);
/* Initialize P2P Discovery in the firmware */
brcmf_err("vif for P2PAPI_BSSCFG_PRIMARY does not exist\n");
return -EPERM;
}
- brcmf_notify_escan_complete(cfg, vif->ifp->ndev, true, true);
+ brcmf_notify_escan_complete(cfg, vif->ifp, true, true);
vif = p2p->bss_idx[P2PAPI_BSSCFG_CONNECTION].vif;
if (!vif) {
brcmf_err("vif for P2PAPI_BSSCFG_CONNECTION does not exist\n");
return brcmf_fil_iovar_data_set(ifp, "p2p_ifdel", addr, ETH_ALEN);
}
+/**
+ * brcmf_p2p_create_p2pdev() - create a P2P_DEVICE virtual interface.
+ *
+ * @p2p: P2P specific data.
+ * @wiphy: wiphy device of new interface.
+ * @addr: mac address for this new interface.
+ */
+static struct wireless_dev *brcmf_p2p_create_p2pdev(struct brcmf_p2p_info *p2p,
+ struct wiphy *wiphy,
+ u8 *addr)
+{
+ struct brcmf_cfg80211_vif *p2p_vif;
+ struct brcmf_if *p2p_ifp;
+ struct brcmf_if *pri_ifp;
+ int err;
+ u32 bssidx;
+
+ if (p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif)
+ return ERR_PTR(-ENOSPC);
+
+ p2p_vif = brcmf_alloc_vif(p2p->cfg, NL80211_IFTYPE_P2P_DEVICE,
+ false);
+ if (IS_ERR(p2p_vif)) {
+ brcmf_err("could not create discovery vif\n");
+ return (struct wireless_dev *)p2p_vif;
+ }
+
+ pri_ifp = p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif->ifp;
+ brcmf_p2p_generate_bss_mac(p2p, addr);
+ brcmf_p2p_set_firmware(pri_ifp, p2p->dev_addr);
+
+ brcmf_cfg80211_arm_vif_event(p2p->cfg, p2p_vif);
+
+ /* Initialize P2P Discovery in the firmware */
+ err = brcmf_fil_iovar_int_set(pri_ifp, "p2p_disc", 1);
+ if (err < 0) {
+ brcmf_err("set p2p_disc error\n");
+ brcmf_cfg80211_arm_vif_event(p2p->cfg, NULL);
+ goto fail;
+ }
+
+ /* wait for firmware event */
+ err = brcmf_cfg80211_wait_vif_event_timeout(p2p->cfg, BRCMF_E_IF_ADD,
+ msecs_to_jiffies(1500));
+ brcmf_cfg80211_arm_vif_event(p2p->cfg, NULL);
+ if (!err) {
+ brcmf_err("timeout occurred\n");
+ err = -EIO;
+ goto fail;
+ }
+
+ /* discovery interface created */
+ p2p_ifp = p2p_vif->ifp;
+ p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = p2p_vif;
+ memcpy(p2p_ifp->mac_addr, p2p->dev_addr, ETH_ALEN);
+ memcpy(&p2p_vif->wdev.address, p2p->dev_addr, sizeof(p2p->dev_addr));
+
+ /* verify bsscfg index for P2P discovery */
+ err = brcmf_fil_iovar_int_get(pri_ifp, "p2p_dev", &bssidx);
+ if (err < 0) {
+ brcmf_err("retrieving discover bsscfg index failed\n");
+ goto fail;
+ }
+
+ WARN_ON(p2p_ifp->bssidx != bssidx);
+
+ init_completion(&p2p->send_af_done);
+ INIT_WORK(&p2p->afx_hdl.afx_work, brcmf_p2p_afx_handler);
+ init_completion(&p2p->afx_hdl.act_frm_scan);
+ init_completion(&p2p->wait_next_af);
+
+ return &p2p_vif->wdev;
+
+fail:
+ brcmf_free_vif(p2p_vif);
+ return ERR_PTR(err);
+}
+
+/**
+ * brcmf_p2p_delete_p2pdev() - delete P2P_DEVICE virtual interface.
+ *
+ * @vif: virtual interface object to delete.
+ */
+static void brcmf_p2p_delete_p2pdev(struct brcmf_cfg80211_vif *vif)
+{
+ struct brcmf_p2p_info *p2p = &vif->ifp->drvr->config->p2p;
+
+ cfg80211_unregister_wdev(&vif->wdev);
+ p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = NULL;
+ brcmf_free_vif(vif);
+}
+
/**
* brcmf_p2p_add_vif() - create a new P2P virtual interface.
*
* @wiphy: wiphy device of new interface.
* @name: name of the new interface.
* @type: nl80211 interface type.
- * @flags: TBD
- * @params: TBD
+ * @flags: not used.
+ * @params: contains mac address for P2P device.
*/
struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name,
enum nl80211_iftype type, u32 *flags,
iftype = BRCMF_FIL_P2P_IF_GO;
mode = WL_MODE_AP;
break;
+ case NL80211_IFTYPE_P2P_DEVICE:
+ return brcmf_p2p_create_p2pdev(&cfg->p2p, wiphy,
+ params->macaddr);
default:
return ERR_PTR(-EOPNOTSUPP);
}
break;
case NL80211_IFTYPE_P2P_DEVICE:
+ brcmf_p2p_delete_p2pdev(vif);
+ return 0;
default:
return -ENOTSUPP;
break;
return err;
}
+
+int brcmf_p2p_start_device(struct wiphy *wiphy, struct wireless_dev *wdev)
+{
+ struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
+ struct brcmf_p2p_info *p2p = &cfg->p2p;
+ struct brcmf_cfg80211_vif *vif;
+ int err;
+
+ vif = container_of(wdev, struct brcmf_cfg80211_vif, wdev);
+ mutex_lock(&cfg->usr_sync);
+ err = brcmf_p2p_enable_discovery(p2p);
+ if (!err)
+ set_bit(BRCMF_VIF_STATUS_READY, &vif->sme_state);
+ mutex_unlock(&cfg->usr_sync);
+ return err;
+}
+
+void brcmf_p2p_stop_device(struct wiphy *wiphy, struct wireless_dev *wdev)
+{
+ struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
+ struct brcmf_p2p_info *p2p = &cfg->p2p;
+ struct brcmf_cfg80211_vif *vif;
+
+ vif = container_of(wdev, struct brcmf_cfg80211_vif, wdev);
+ mutex_lock(&cfg->usr_sync);
+ (void)brcmf_p2p_deinit_discovery(p2p);
+ brcmf_abort_scanning(cfg);
+ clear_bit(BRCMF_VIF_STATUS_READY, &vif->sme_state);
+ mutex_unlock(&cfg->usr_sync);
+}
projects / firefly-linux-kernel-4.4.55.git / blobdiff