break;
}
+ case HW_VAR_FW_LPS_ACTION: {
+ bool enter_fwlps = *((bool *)val);
+ u8 rpwm_val, fw_pwrmode;
+ bool fw_current_inps;
+
+ if (enter_fwlps) {
+ rpwm_val = 0x02; /* RF off */
+ fw_current_inps = true;
+ rtlpriv->cfg->ops->set_hw_reg(hw,
+ HW_VAR_FW_PSMODE_STATUS,
+ (u8 *)(&fw_current_inps));
+ rtlpriv->cfg->ops->set_hw_reg(hw,
+ HW_VAR_H2C_FW_PWRMODE,
+ (u8 *)(&ppsc->fwctrl_psmode));
+
+ rtlpriv->cfg->ops->set_hw_reg(hw,
+ HW_VAR_SET_RPWM,
+ (u8 *)(&rpwm_val));
+ } else {
+ rpwm_val = 0x0C; /* RF on */
+ fw_pwrmode = FW_PS_ACTIVE_MODE;
+ fw_current_inps = false;
+ rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SET_RPWM,
+ (u8 *)(&rpwm_val));
+ rtlpriv->cfg->ops->set_hw_reg(hw,
+ HW_VAR_H2C_FW_PWRMODE,
+ (u8 *)(&fw_pwrmode));
+
+ rtlpriv->cfg->ops->set_hw_reg(hw,
+ HW_VAR_FW_PSMODE_STATUS,
+ (u8 *)(&fw_current_inps));
+ }
+ break; }
default:
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
"switch case not processed\n");
}
-static u8 _rtl92ce_halset_sysclk(struct ieee80211_hw *hw, u8 data)
+static u8 _rtl92se_halset_sysclk(struct ieee80211_hw *hw, u8 data)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
u8 waitcount = 100;
tmpu1b &= ~(BIT(6) | BIT(7));
/* Set failed, return to prevent hang. */
- if (!_rtl92ce_halset_sysclk(hw, tmpu1b))
+ if (!_rtl92se_halset_sysclk(hw, tmpu1b))
return;
}
tmpu1b = rtl_read_byte(rtlpriv, (SYS_CLKR + 1));
tmpu1b = ((tmpu1b | BIT(7)) & (~BIT(6)));
- if (!_rtl92ce_halset_sysclk(hw, tmpu1b))
+ if (!_rtl92se_halset_sysclk(hw, tmpu1b))
return; /* Set failed, return to prevent hang. */
rtl_write_word(rtlpriv, CMDR, 0x07FC);
return rtstatus;
}
+ /* because last function modify RCR, so we update
+ * rcr var here, or TP will unstable for receive_config
+ * is wrong, RX RCR_ACRC32 will cause TP unstabel & Rx
+ * RCR_APP_ICV will cause mac80211 unassoc for cisco 1252
+ */
+ rtlpci->receive_config = rtl_read_dword(rtlpriv, RCR);
+ rtlpci->receive_config &= ~(RCR_ACRC32 | RCR_AICV);
+ rtl_write_dword(rtlpriv, RCR, rtlpci->receive_config);
+
/* Make sure BB/RF write OK. We should prevent enter IPS. radio off. */
/* We must set flag avoid BB/RF config period later!! */
rtl_write_dword(rtlpriv, CMDR, 0x37FC);
rtlphy->rf_mode = RF_OP_BY_SW_3WIRE;
- /* RF Power Save */
-#if 0
- /* H/W or S/W RF OFF before sleep. */
- if (rtlpriv->psc.rfoff_reason > RF_CHANGE_BY_PS) {
- u32 rfoffreason = rtlpriv->psc.rfoff_reason;
-
- rtlpriv->psc.rfoff_reason = RF_CHANGE_BY_INIT;
- rtlpriv->psc.rfpwr_state = ERFON;
- /* FIXME: check spinlocks if this block is uncommented */
- rtl_ps_set_rf_state(hw, ERFOFF, rfoffreason);
- } else {
- /* gpio radio on/off is out of adapter start */
- if (rtlpriv->psc.hwradiooff == false) {
- rtlpriv->psc.rfpwr_state = ERFON;
- rtlpriv->psc.rfoff_reason = 0;
- }
- }
-#endif
-
/* Before RF-R/W we must execute the IO from Scott's suggestion. */
rtl_write_byte(rtlpriv, AFE_XTAL_CTRL + 1, 0xDB);
if (rtlhal->version == VERSION_8192S_ACUT)
/* We enable high power and RA related mechanism after NIC
* initialized. */
- rtl92s_phy_set_fw_cmd(hw, FW_CMD_RA_INIT);
+ if (hal_get_firmwareversion(rtlpriv) >= 0x35) {
+ /* Fw v.53 and later. */
+ rtl92s_phy_set_fw_cmd(hw, FW_CMD_RA_INIT);
+ } else if (hal_get_firmwareversion(rtlpriv) == 0x34) {
+ /* Fw v.52. */
+ rtl_write_dword(rtlpriv, WFM5, FW_RA_INIT);
+ rtl92s_phy_chk_fwcmd_iodone(hw);
+ } else {
+ /* Compatible earlier FW version. */
+ rtl_write_dword(rtlpriv, WFM5, FW_RA_RESET);
+ rtl92s_phy_chk_fwcmd_iodone(hw);
+ rtl_write_dword(rtlpriv, WFM5, FW_RA_ACTIVE);
+ rtl92s_phy_chk_fwcmd_iodone(hw);
+ rtl_write_dword(rtlpriv, WFM5, FW_RA_REFRESH);
+ rtl92s_phy_chk_fwcmd_iodone(hw);
+ }
/* Add to prevent ASPM bug. */
/* Always enable hst and NIC clock request. */
synchronize_irq(rtlpci->pdev->irq);
}
-
static u8 _rtl92s_set_sysclk(struct ieee80211_hw *hw, u8 data)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
}
for (i = 0; i < 14; i++) {
- RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+ RTPRINT(rtlpriv, FINIT, INIT_TXPOWER,
"RF(%d)-Ch(%d) [CCK / HT40_1S / HT40_2S] = [0x%x / 0x%x / 0x%x]\n",
rf_path, i,
rtlefuse->txpwrlevel_cck[rf_path][i],
((rtlefuse->eeprom_pwrgroup[rf_path][index] &
0xf0) >> 4);
- RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+ RTPRINT(rtlpriv, FINIT, INIT_TXPOWER,
"RF-%d pwrgroup_ht20[%d] = 0x%x\n",
rf_path, i,
rtlefuse->pwrgroup_ht20[rf_path][i]);
- RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+ RTPRINT(rtlpriv, FINIT, INIT_TXPOWER,
"RF-%d pwrgroup_ht40[%d] = 0x%x\n",
rf_path, i,
rtlefuse->pwrgroup_ht40[rf_path][i]);
rtlefuse->eeprom_regulatory =
(hwinfo[EEPROM_REGULATORY] & 0x1);
}
- RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+ RTPRINT(rtlpriv, FINIT, INIT_TXPOWER,
"eeprom_regulatory = 0x%x\n", rtlefuse->eeprom_regulatory);
for (i = 0; i < 14; i++)
- RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+ RTPRINT(rtlpriv, FINIT, INIT_TXPOWER,
"RF-A Ht20 to HT40 Diff[%d] = 0x%x\n",
i, rtlefuse->txpwr_ht20diff[RF90_PATH_A][i]);
for (i = 0; i < 14; i++)
- RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+ RTPRINT(rtlpriv, FINIT, INIT_TXPOWER,
"RF-A Legacy to Ht40 Diff[%d] = 0x%x\n",
i, rtlefuse->txpwr_legacyhtdiff[RF90_PATH_A][i]);
for (i = 0; i < 14; i++)
- RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+ RTPRINT(rtlpriv, FINIT, INIT_TXPOWER,
"RF-B Ht20 to HT40 Diff[%d] = 0x%x\n",
i, rtlefuse->txpwr_ht20diff[RF90_PATH_B][i]);
for (i = 0; i < 14; i++)
- RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+ RTPRINT(rtlpriv, FINIT, INIT_TXPOWER,
"RF-B Legacy to HT40 Diff[%d] = 0x%x\n",
i, rtlefuse->txpwr_legacyhtdiff[RF90_PATH_B][i]);
- RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+ RTPRINT(rtlpriv, FINIT, INIT_TXPOWER,
"TxPwrSafetyFlag = %d\n", rtlefuse->txpwr_safetyflag);
/* Read RF-indication and Tx Power gain
rtlefuse->legacy_httxpowerdiff =
rtlefuse->txpwr_legacyhtdiff[RF90_PATH_A][0];
- RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+ RTPRINT(rtlpriv, FINIT, INIT_TXPOWER,
"TxPowerDiff = %#x\n", rtlefuse->eeprom_txpowerdiff);
/* Get TSSI value for each path. */
usvalue = hwinfo[EEPROM_TSSI_B];
rtlefuse->eeprom_tssi[RF90_PATH_B] = (u8)(usvalue & 0xff);
- RTPRINT(rtlpriv, FINIT, INIT_TxPower, "TSSI_A = 0x%x, TSSI_B = 0x%x\n",
+ RTPRINT(rtlpriv, FINIT, INIT_TXPOWER, "TSSI_A = 0x%x, TSSI_B = 0x%x\n",
rtlefuse->eeprom_tssi[RF90_PATH_A],
rtlefuse->eeprom_tssi[RF90_PATH_B]);
/* and read ThermalMeter from EEPROM */
tempval = hwinfo[EEPROM_THERMALMETER];
rtlefuse->eeprom_thermalmeter = tempval;
- RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+ RTPRINT(rtlpriv, FINIT, INIT_TXPOWER,
"thermalmeter = 0x%x\n", rtlefuse->eeprom_thermalmeter);
/* ThermalMeter, BIT(0)~3 for RFIC1, BIT(4)~7 for RFIC2 */
/* Version ID, Channel plan */
rtlefuse->eeprom_channelplan = hwinfo[EEPROM_CHANNELPLAN];
rtlefuse->txpwr_fromeprom = true;
- RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+ RTPRINT(rtlpriv, FINIT, INIT_TXPOWER,
"EEPROM ChannelPlan = 0x%4x\n", rtlefuse->eeprom_channelplan);
/* Read Customer ID or Board Type!!! */
ratr_value = sta->supp_rates[1] << 4;
else
ratr_value = sta->supp_rates[0];
+ if (mac->opmode == NL80211_IFTYPE_ADHOC)
+ ratr_value = 0xfff;
ratr_value |= (sta->ht_cap.mcs.rx_mask[1] << 20 |
sta->ht_cap.mcs.rx_mask[0] << 12);
switch (wirelessmode) {
ratr_bitmap = sta->supp_rates[1] << 4;
else
ratr_bitmap = sta->supp_rates[0];
+ if (mac->opmode == NL80211_IFTYPE_ADHOC)
+ ratr_bitmap = 0xfff;
ratr_bitmap |= (sta->ht_cap.mcs.rx_mask[1] << 20 |
sta->ht_cap.mcs.rx_mask[0] << 12);
switch (wirelessmode) {
ratr_bitmap &= 0x0f8ff0ff;
break;
}
+ sta_entry->ratr_index = ratr_index;
if (rtlpriv->rtlhal.version >= VERSION_8192S_BCUT)
ratr_bitmap &= 0x0FFFFFFF;
rtl_cam_del_entry(hw, p_macaddr);
rtl_cam_delete_one_entry(hw, p_macaddr, entry_id);
} else {
- RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
- "The insert KEY length is %d\n",
- rtlpriv->sec.key_len[PAIRWISE_KEYIDX]);
- RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
- "The insert KEY is %x %x\n",
- rtlpriv->sec.key_buf[0][0],
- rtlpriv->sec.key_buf[0][1]);
-
RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
"add one entry\n");
if (is_pairwise) {
- RT_PRINT_DATA(rtlpriv, COMP_SEC, DBG_LOUD,
- "Pairwise Key content",
- rtlpriv->sec.pairwise_key,
- rtlpriv->sec.
- key_len[PAIRWISE_KEYIDX]);
-
RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
"set Pairwise key\n");
pci_write_config_dword(rtlpci->pdev, 0x40,
val & 0xffff00ff);
}
+
+/* Turn on AAP (RCR:bit 0) for promicuous mode. */
+void rtl92se_allow_all_destaddr(struct ieee80211_hw *hw,
+ bool allow_all_da, bool write_into_reg)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+ if (allow_all_da) /* Set BIT0 */
+ rtlpci->receive_config |= RCR_AAP;
+ else /* Clear BIT0 */
+ rtlpci->receive_config &= ~RCR_AAP;
+
+ if (write_into_reg)
+ rtl_write_dword(rtlpriv, RCR, rtlpci->receive_config);
+
+ RT_TRACE(rtlpriv, COMP_TURBO | COMP_INIT, DBG_LOUD,
+ "receive_config=0x%08X, write_into_reg=%d\n",
+ rtlpci->receive_config, write_into_reg);
+}
projects / firefly-linux-kernel-4.4.55.git / blobdiff