#include <linux/pm.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
-#include <asm/setup.h>
+#include <asm/mrst.h>
#include <asm/intel_scu_ipc.h>
/* IPC defines the following message types */
#define IPC_CMD_PCNTRL_R 1 /* Register read */
#define IPC_CMD_PCNTRL_M 2 /* Register read-modify-write */
-/* Miscelaneous Command ids */
-#define IPC_CMD_INDIRECT_RD 2 /* 32bit indirect read */
-#define IPC_CMD_INDIRECT_WR 5 /* 32bit indirect write */
-
/*
* IPC register summary
*
static struct intel_scu_ipc_dev ipcdev; /* Only one for now */
-static int platform = 1;
-module_param(platform, int, 0);
-MODULE_PARM_DESC(platform, "1 for moorestown platform");
-
-
-
+static int platform; /* Platform type */
/*
* IPC Read Buffer (Read Only):
writel(data, ipcdev.ipc_base + 0x80 + offset);
}
-/*
- * IPC destination Pointer (Write Only):
- * Use content as pointer for destination write
- */
-static inline void ipc_write_dptr(u32 data) /* Write dptr data */
-{
- writel(data, ipcdev.ipc_base + 0x0C);
-}
-
-/*
- * IPC Source Pointer (Write Only):
- * Use content as pointer for read location
-*/
-static inline void ipc_write_sptr(u32 data) /* Write dptr data */
-{
- writel(data, ipcdev.ipc_base + 0x08);
-}
-
/*
* Status Register (Read Only):
* Driver will read this register to get the ready/busy status of the IPC
return readb(ipcdev.ipc_base + IPC_READ_BUFFER + offset);
}
-static inline u8 ipc_data_readl(u32 offset) /* Read ipc u32 data */
+static inline u32 ipc_data_readl(u32 offset) /* Read ipc u32 data */
{
return readl(ipcdev.ipc_base + IPC_READ_BUFFER + offset);
}
int nc;
u32 offset = 0;
u32 err = 0;
- u8 cbuf[IPC_WWBUF_SIZE] = { '\0' };
+ u8 cbuf[IPC_WWBUF_SIZE] = { };
u32 *wbuf = (u32 *)&cbuf;
mutex_lock(&ipclock);
+
if (ipcdev.pdev == NULL) {
mutex_unlock(&ipclock);
return -ENODEV;
}
- if (platform == 1) {
+ if (platform != MRST_CPU_CHIP_PENWELL) {
/* Entry is 4 bytes for read/write, 5 bytes for read modify */
- for (nc = 0; nc < count; nc++) {
+ for (nc = 0; nc < count; nc++, offset += 3) {
cbuf[offset] = addr[nc];
cbuf[offset + 1] = addr[nc] >> 8;
if (id != IPC_CMD_PCNTRL_R)
cbuf[offset + 3] = data[nc + 1];
offset += 1;
}
- offset += 3;
}
for (nc = 0, offset = 0; nc < count; nc++, offset += 4)
ipc_data_writel(wbuf[nc], offset); /* Write wbuff */
+ if (id != IPC_CMD_PCNTRL_M)
+ ipc_command((count*4) << 16 | id << 12 | 0 << 8 | op);
+ else
+ ipc_command((count*5) << 16 | id << 12 | 0 << 8 | op);
+
} else {
- for (nc = 0, offset = 0; nc < count; nc++, offset += 2)
- ipc_data_writel(addr[nc], offset); /* Write addresses */
- if (id != IPC_CMD_PCNTRL_R) {
- for (nc = 0; nc < count; nc++, offset++)
- ipc_data_writel(data[nc], offset); /* Write data */
- if (id == IPC_CMD_PCNTRL_M)
- ipc_data_writel(data[nc + 1], offset); /* Mask value*/
+ for (nc = 0; nc < count; nc++, offset += 2) {
+ cbuf[offset] = addr[nc];
+ cbuf[offset + 1] = addr[nc] >> 8;
}
- }
- if (id != IPC_CMD_PCNTRL_M)
- ipc_command((count * 3) << 16 | id << 12 | 0 << 8 | op);
- else
- ipc_command((count * 4) << 16 | id << 12 | 0 << 8 | op);
+ if (id == IPC_CMD_PCNTRL_R) {
+ for (nc = 0, offset = 0; nc < count; nc++, offset += 4)
+ ipc_data_writel(wbuf[nc], offset);
+ ipc_command((count*2) << 16 | id << 12 | 0 << 8 | op);
+ } else if (id == IPC_CMD_PCNTRL_W) {
+ for (nc = 0; nc < count; nc++, offset += 1)
+ cbuf[offset] = data[nc];
+ for (nc = 0, offset = 0; nc < count; nc++, offset += 4)
+ ipc_data_writel(wbuf[nc], offset);
+ ipc_command((count*3) << 16 | id << 12 | 0 << 8 | op);
+ } else if (id == IPC_CMD_PCNTRL_M) {
+ cbuf[offset] = data[0];
+ cbuf[offset + 1] = data[1];
+ ipc_data_writel(wbuf[0], 0); /* Write wbuff */
+ ipc_command(4 << 16 | id << 12 | 0 << 8 | op);
+ }
+ }
err = busy_loop();
-
if (id == IPC_CMD_PCNTRL_R) { /* Read rbuf */
/* Workaround: values are read as 0 without memcpy_fromio */
- memcpy_fromio(cbuf, ipcdev.ipc_base + IPC_READ_BUFFER, 16);
- if (platform == 1) {
+ memcpy_fromio(cbuf, ipcdev.ipc_base + 0x90, 16);
+ if (platform != MRST_CPU_CHIP_PENWELL) {
for (nc = 0, offset = 2; nc < count; nc++, offset += 3)
data[nc] = ipc_data_readb(offset);
} else {
}
EXPORT_SYMBOL(intel_scu_ipc_update_register);
-/**
- * intel_scu_ipc_register_read - 32bit indirect read
- * @addr: register address
- * @value: 32bit value return
- *
- * Performs IA 32 bit indirect read, returns 0 on success, or an
- * error code.
- *
- * Can be used when SCCB(System Controller Configuration Block) register
- * HRIM(Honor Restricted IPC Messages) is set (bit 23)
- *
- * This function may sleep. Locking for SCU accesses is handled for
- * the caller.
- */
-int intel_scu_ipc_register_read(u32 addr, u32 *value)
-{
- u32 err = 0;
-
- mutex_lock(&ipclock);
- if (ipcdev.pdev == NULL) {
- mutex_unlock(&ipclock);
- return -ENODEV;
- }
- ipc_write_sptr(addr);
- ipc_command(4 << 16 | IPC_CMD_INDIRECT_RD);
- err = busy_loop();
- *value = ipc_data_readl(0);
- mutex_unlock(&ipclock);
- return err;
-}
-EXPORT_SYMBOL(intel_scu_ipc_register_read);
-
-/**
- * intel_scu_ipc_register_write - 32bit indirect write
- * @addr: register address
- * @value: 32bit value to write
- *
- * Performs IA 32 bit indirect write, returns 0 on success, or an
- * error code.
- *
- * Can be used when SCCB(System Controller Configuration Block) register
- * HRIM(Honor Restricted IPC Messages) is set (bit 23)
- *
- * This function may sleep. Locking for SCU accesses is handled for
- * the caller.
- */
-int intel_scu_ipc_register_write(u32 addr, u32 value)
-{
- u32 err = 0;
-
- mutex_lock(&ipclock);
- if (ipcdev.pdev == NULL) {
- mutex_unlock(&ipclock);
- return -ENODEV;
- }
- ipc_write_dptr(addr);
- ipc_data_writel(value, 0);
- ipc_command(4 << 16 | IPC_CMD_INDIRECT_WR);
- err = busy_loop();
- mutex_unlock(&ipclock);
- return err;
-}
-EXPORT_SYMBOL(intel_scu_ipc_register_write);
-
/**
* intel_scu_ipc_simple_command - send a simple command
* @cmd: command
mutex_unlock(&ipclock);
return -ENODEV;
}
- ipc_command(cmd << 12 | sub);
+ ipc_command(sub << 12 | cmd);
err = busy_loop();
mutex_unlock(&ipclock);
return err;
* @cmd: command
* @sub: sub type
* @in: input data
- * @inlen: input length
+ * @inlen: input length in dwords
* @out: output data
- * @outlein: output length
+ * @outlein: output length in dwords
*
* Issue a command to the SCU which involves data transfers. Do the
* data copies under the lock but leave it for the caller to interpret
for (i = 0; i < inlen; i++)
ipc_data_writel(*in++, 4 * i);
- ipc_command(cmd << 12 | sub);
+ ipc_command((sub << 12) | cmd | (inlen << 18));
err = busy_loop();
for (i = 0; i < outlen; i++)
u32 cmd = 0;
mutex_lock(&ipclock);
+ if (ipcdev.pdev == NULL) {
+ mutex_unlock(&ipclock);
+ return -ENODEV;
+ }
cmd = (addr >> 24) & 0xFF;
if (cmd == IPC_I2C_READ) {
writel(addr, ipcdev.i2c_base + IPC_I2C_CNTRL_ADDR);
static const struct pci_device_id pci_ids[] = {
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x080e)},
+ {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x082a)},
{ 0,}
};
MODULE_DEVICE_TABLE(pci, pci_ids);
static int __init intel_scu_ipc_init(void)
{
+ platform = mrst_identify_cpu();
+ if (platform == 0)
+ return -ENODEV;
return pci_register_driver(&ipc_driver);
}