static int dev_num;
/* FCoE Adapter types & its description */
-static const struct csio_adap_desc csio_fcoe_adapters[] = {
+static const struct csio_adap_desc csio_t4_fcoe_adapters[] = {
{"T440-Dbg 10G", "Chelsio T440-Dbg 10G [FCoE]"},
{"T420-CR 10G", "Chelsio T420-CR 10G [FCoE]"},
{"T422-CR 10G/1G", "Chelsio T422-CR 10G/1G [FCoE]"},
{"B404-BT 1G", "Chelsio B404-BT 1G [FCoE]"},
{"T480-CR 10G", "Chelsio T480-CR 10G [FCoE]"},
{"T440-LP-CR 10G", "Chelsio T440-LP-CR 10G [FCoE]"},
- {"T4 FPGA", "Chelsio T4 FPGA [FCoE]"}
+ {"AMSTERDAM 10G", "Chelsio AMSTERDAM 10G [FCoE]"},
+ {"HUAWEI T480 10G", "Chelsio HUAWEI T480 10G [FCoE]"},
+ {"HUAWEI T440 10G", "Chelsio HUAWEI T440 10G [FCoE]"},
+ {"HUAWEI STG 10G", "Chelsio HUAWEI STG 10G [FCoE]"},
+ {"ACROMAG XAUI 10G", "Chelsio ACROMAG XAUI 10G [FCoE]"},
+ {"ACROMAG SFP+ 10G", "Chelsio ACROMAG SFP+ 10G [FCoE]"},
+ {"QUANTA SFP+ 10G", "Chelsio QUANTA SFP+ 10G [FCoE]"},
+ {"HUAWEI 10Gbase-T", "Chelsio HUAWEI 10Gbase-T [FCoE]"},
+ {"HUAWEI T4TOE 10G", "Chelsio HUAWEI T4TOE 10G [FCoE]"}
+};
+
+static const struct csio_adap_desc csio_t5_fcoe_adapters[] = {
+ {"T580-Dbg 10G", "Chelsio T580-Dbg 10G [FCoE]"},
+ {"T520-CR 10G", "Chelsio T520-CR 10G [FCoE]"},
+ {"T522-CR 10G/1G", "Chelsio T452-CR 10G/1G [FCoE]"},
+ {"T540-CR 10G", "Chelsio T540-CR 10G [FCoE]"},
+ {"T520-BCH 10G", "Chelsio T520-BCH 10G [FCoE]"},
+ {"T540-BCH 10G", "Chelsio T540-BCH 10G [FCoE]"},
+ {"T540-CH 10G", "Chelsio T540-CH 10G [FCoE]"},
+ {"T520-SO 10G", "Chelsio T520-SO 10G [FCoE]"},
+ {"T520-CX4 10G", "Chelsio T520-CX4 10G [FCoE]"},
+ {"T520-BT 10G", "Chelsio T520-BT 10G [FCoE]"},
+ {"T504-BT 1G", "Chelsio T504-BT 1G [FCoE]"},
+ {"B520-SR 10G", "Chelsio B520-SR 10G [FCoE]"},
+ {"B504-BT 1G", "Chelsio B504-BT 1G [FCoE]"},
+ {"T580-CR 10G", "Chelsio T580-CR 10G [FCoE]"},
+ {"T540-LP-CR 10G", "Chelsio T540-LP-CR 10G [FCoE]"},
+ {"AMSTERDAM 10G", "Chelsio AMSTERDAM 10G [FCoE]"},
+ {"T580-LP-CR 40G", "Chelsio T580-LP-CR 40G [FCoE]"},
+ {"T520-LL-CR 10G", "Chelsio T520-LL-CR 10G [FCoE]"},
+ {"T560-CR 40G", "Chelsio T560-CR 40G [FCoE]"},
+ {"T580-CR 40G", "Chelsio T580-CR 40G [FCoE]"}
};
static void csio_mgmtm_cleanup(struct csio_mgmtm *);
* at the time it indicated completion is stored there. Returns 0 if the
* operation completes and -EAGAIN otherwise.
*/
-static int
+int
csio_hw_wait_op_done_val(struct csio_hw *hw, int reg, uint32_t mask,
int polarity, int attempts, int delay, uint32_t *valp)
{
}
}
+/*
+ * csio_hw_tp_wr_bits_indirect - set/clear bits in an indirect TP register
+ * @hw: the adapter
+ * @addr: the indirect TP register address
+ * @mask: specifies the field within the register to modify
+ * @val: new value for the field
+ *
+ * Sets a field of an indirect TP register to the given value.
+ */
+void
+csio_hw_tp_wr_bits_indirect(struct csio_hw *hw, unsigned int addr,
+ unsigned int mask, unsigned int val)
+{
+ csio_wr_reg32(hw, addr, TP_PIO_ADDR);
+ val |= csio_rd_reg32(hw, TP_PIO_DATA) & ~mask;
+ csio_wr_reg32(hw, val, TP_PIO_DATA);
+}
+
void
csio_set_reg_field(struct csio_hw *hw, uint32_t reg, uint32_t mask,
uint32_t value)
}
-/*
- * csio_hw_mc_read - read from MC through backdoor accesses
- * @hw: the hw module
- * @addr: address of first byte requested
- * @data: 64 bytes of data containing the requested address
- * @ecc: where to store the corresponding 64-bit ECC word
- *
- * Read 64 bytes of data from MC starting at a 64-byte-aligned address
- * that covers the requested address @addr. If @parity is not %NULL it
- * is assigned the 64-bit ECC word for the read data.
- */
-int
-csio_hw_mc_read(struct csio_hw *hw, uint32_t addr, __be32 *data,
- uint64_t *ecc)
-{
- int i;
-
- if (csio_rd_reg32(hw, MC_BIST_CMD) & START_BIST)
- return -EBUSY;
- csio_wr_reg32(hw, addr & ~0x3fU, MC_BIST_CMD_ADDR);
- csio_wr_reg32(hw, 64, MC_BIST_CMD_LEN);
- csio_wr_reg32(hw, 0xc, MC_BIST_DATA_PATTERN);
- csio_wr_reg32(hw, BIST_OPCODE(1) | START_BIST | BIST_CMD_GAP(1),
- MC_BIST_CMD);
- i = csio_hw_wait_op_done_val(hw, MC_BIST_CMD, START_BIST,
- 0, 10, 1, NULL);
- if (i)
- return i;
-
-#define MC_DATA(i) MC_BIST_STATUS_REG(MC_BIST_STATUS_RDATA, i)
-
- for (i = 15; i >= 0; i--)
- *data++ = htonl(csio_rd_reg32(hw, MC_DATA(i)));
- if (ecc)
- *ecc = csio_rd_reg64(hw, MC_DATA(16));
-#undef MC_DATA
- return 0;
-}
-
-/*
- * csio_hw_edc_read - read from EDC through backdoor accesses
- * @hw: the hw module
- * @idx: which EDC to access
- * @addr: address of first byte requested
- * @data: 64 bytes of data containing the requested address
- * @ecc: where to store the corresponding 64-bit ECC word
- *
- * Read 64 bytes of data from EDC starting at a 64-byte-aligned address
- * that covers the requested address @addr. If @parity is not %NULL it
- * is assigned the 64-bit ECC word for the read data.
- */
-int
-csio_hw_edc_read(struct csio_hw *hw, int idx, uint32_t addr, __be32 *data,
- uint64_t *ecc)
-{
- int i;
-
- idx *= EDC_STRIDE;
- if (csio_rd_reg32(hw, EDC_BIST_CMD + idx) & START_BIST)
- return -EBUSY;
- csio_wr_reg32(hw, addr & ~0x3fU, EDC_BIST_CMD_ADDR + idx);
- csio_wr_reg32(hw, 64, EDC_BIST_CMD_LEN + idx);
- csio_wr_reg32(hw, 0xc, EDC_BIST_DATA_PATTERN + idx);
- csio_wr_reg32(hw, BIST_OPCODE(1) | BIST_CMD_GAP(1) | START_BIST,
- EDC_BIST_CMD + idx);
- i = csio_hw_wait_op_done_val(hw, EDC_BIST_CMD + idx, START_BIST,
- 0, 10, 1, NULL);
- if (i)
- return i;
-
-#define EDC_DATA(i) (EDC_BIST_STATUS_REG(EDC_BIST_STATUS_RDATA, i) + idx)
-
- for (i = 15; i >= 0; i--)
- *data++ = htonl(csio_rd_reg32(hw, EDC_DATA(i)));
- if (ecc)
- *ecc = csio_rd_reg64(hw, EDC_DATA(16));
-#undef EDC_DATA
- return 0;
-}
-
-/*
- * csio_mem_win_rw - read/write memory through PCIE memory window
- * @hw: the adapter
- * @addr: address of first byte requested
- * @data: MEMWIN0_APERTURE bytes of data containing the requested address
- * @dir: direction of transfer 1 => read, 0 => write
- *
- * Read/write MEMWIN0_APERTURE bytes of data from MC starting at a
- * MEMWIN0_APERTURE-byte-aligned address that covers the requested
- * address @addr.
- */
-static int
-csio_mem_win_rw(struct csio_hw *hw, u32 addr, u32 *data, int dir)
-{
- int i;
-
- /*
- * Setup offset into PCIE memory window. Address must be a
- * MEMWIN0_APERTURE-byte-aligned address. (Read back MA register to
- * ensure that changes propagate before we attempt to use the new
- * values.)
- */
- csio_wr_reg32(hw, addr & ~(MEMWIN0_APERTURE - 1),
- PCIE_MEM_ACCESS_OFFSET);
- csio_rd_reg32(hw, PCIE_MEM_ACCESS_OFFSET);
-
- /* Collecting data 4 bytes at a time upto MEMWIN0_APERTURE */
- for (i = 0; i < MEMWIN0_APERTURE; i = i + sizeof(__be32)) {
- if (dir)
- *data++ = csio_rd_reg32(hw, (MEMWIN0_BASE + i));
- else
- csio_wr_reg32(hw, *data++, (MEMWIN0_BASE + i));
- }
-
- return 0;
-}
-
-/*
- * csio_memory_rw - read/write EDC 0, EDC 1 or MC via PCIE memory window
- * @hw: the csio_hw
- * @mtype: memory type: MEM_EDC0, MEM_EDC1 or MEM_MC
- * @addr: address within indicated memory type
- * @len: amount of memory to transfer
- * @buf: host memory buffer
- * @dir: direction of transfer 1 => read, 0 => write
- *
- * Reads/writes an [almost] arbitrary memory region in the firmware: the
- * firmware memory address, length and host buffer must be aligned on
- * 32-bit boudaries. The memory is transferred as a raw byte sequence
- * from/to the firmware's memory. If this memory contains data
- * structures which contain multi-byte integers, it's the callers
- * responsibility to perform appropriate byte order conversions.
- */
-static int
-csio_memory_rw(struct csio_hw *hw, int mtype, u32 addr, u32 len,
- uint32_t *buf, int dir)
-{
- uint32_t pos, start, end, offset, memoffset;
- int ret;
- uint32_t *data;
-
- /*
- * Argument sanity checks ...
- */
- if ((addr & 0x3) || (len & 0x3))
- return -EINVAL;
-
- data = kzalloc(MEMWIN0_APERTURE, GFP_KERNEL);
- if (!data)
- return -ENOMEM;
-
- /* Offset into the region of memory which is being accessed
- * MEM_EDC0 = 0
- * MEM_EDC1 = 1
- * MEM_MC = 2
- */
- memoffset = (mtype * (5 * 1024 * 1024));
-
- /* Determine the PCIE_MEM_ACCESS_OFFSET */
- addr = addr + memoffset;
-
- /*
- * The underlaying EDC/MC read routines read MEMWIN0_APERTURE bytes
- * at a time so we need to round down the start and round up the end.
- * We'll start copying out of the first line at (addr - start) a word
- * at a time.
- */
- start = addr & ~(MEMWIN0_APERTURE-1);
- end = (addr + len + MEMWIN0_APERTURE-1) & ~(MEMWIN0_APERTURE-1);
- offset = (addr - start)/sizeof(__be32);
-
- for (pos = start; pos < end; pos += MEMWIN0_APERTURE, offset = 0) {
- /*
- * If we're writing, copy the data from the caller's memory
- * buffer
- */
- if (!dir) {
- /*
- * If we're doing a partial write, then we need to do
- * a read-modify-write ...
- */
- if (offset || len < MEMWIN0_APERTURE) {
- ret = csio_mem_win_rw(hw, pos, data, 1);
- if (ret) {
- kfree(data);
- return ret;
- }
- }
- while (offset < (MEMWIN0_APERTURE/sizeof(__be32)) &&
- len > 0) {
- data[offset++] = *buf++;
- len -= sizeof(__be32);
- }
- }
-
- /*
- * Transfer a block of memory and bail if there's an error.
- */
- ret = csio_mem_win_rw(hw, pos, data, dir);
- if (ret) {
- kfree(data);
- return ret;
- }
-
- /*
- * If we're reading, copy the data into the caller's memory
- * buffer.
- */
- if (dir)
- while (offset < (MEMWIN0_APERTURE/sizeof(__be32)) &&
- len > 0) {
- *buf++ = data[offset++];
- len -= sizeof(__be32);
- }
- }
-
- kfree(data);
-
- return 0;
-}
-
static int
csio_memory_write(struct csio_hw *hw, int mtype, u32 addr, u32 len, u32 *buf)
{
- return csio_memory_rw(hw, mtype, addr, len, buf, 0);
+ return hw->chip_ops->chip_memory_rw(hw, MEMWIN_CSIOSTOR, mtype,
+ addr, len, buf, 0);
}
/*
* EEPROM reads take a few tens of us while writes can take a bit over 5 ms.
*/
-#define EEPROM_MAX_RD_POLL 40
-#define EEPROM_MAX_WR_POLL 6
-#define EEPROM_STAT_ADDR 0x7bfc
-#define VPD_BASE 0x400
-#define VPD_BASE_OLD 0
-#define VPD_LEN 512
+#define EEPROM_MAX_RD_POLL 40
+#define EEPROM_MAX_WR_POLL 6
+#define EEPROM_STAT_ADDR 0x7bfc
+#define VPD_BASE 0x400
+#define VPD_BASE_OLD 0
+#define VPD_LEN 1024
#define VPD_INFO_FLD_HDR_SIZE 3
/*
return 0;
}
-/*
- * csio_hw_flash_cfg_addr - return the address of the flash
- * configuration file
- * @hw: the HW module
- *
- * Return the address within the flash where the Firmware Configuration
- * File is stored.
- */
-static unsigned int
-csio_hw_flash_cfg_addr(struct csio_hw *hw)
-{
- if (hw->params.sf_size == 0x100000)
- return FPGA_FLASH_CFG_OFFSET;
- else
- return FLASH_CFG_OFFSET;
-}
-
static void
csio_hw_print_fw_version(struct csio_hw *hw, char *str)
{
minor = FW_HDR_FW_VER_MINOR_GET(hw->fwrev);
micro = FW_HDR_FW_VER_MICRO_GET(hw->fwrev);
- if (major != FW_VERSION_MAJOR) { /* major mismatch - fail */
+ if (major != FW_VERSION_MAJOR(hw)) { /* major mismatch - fail */
csio_err(hw, "card FW has major version %u, driver wants %u\n",
- major, FW_VERSION_MAJOR);
+ major, FW_VERSION_MAJOR(hw));
return -EINVAL;
}
- if (minor == FW_VERSION_MINOR && micro == FW_VERSION_MICRO)
+ if (minor == FW_VERSION_MINOR(hw) && micro == FW_VERSION_MICRO(hw))
return 0; /* perfect match */
/* Minor/micro version mismatch */
csio_set_pcie_completion_timeout(struct csio_hw *hw, u8 range)
{
uint16_t val;
- uint32_t pcie_cap;
+ int pcie_cap;
if (!csio_pci_capability(hw->pdev, PCI_CAP_ID_EXP, &pcie_cap)) {
pci_read_config_word(hw->pdev,
}
}
-
-/*
- * Return the specified PCI-E Configuration Space register from our Physical
- * Function. We try first via a Firmware LDST Command since we prefer to let
- * the firmware own all of these registers, but if that fails we go for it
- * directly ourselves.
- */
-static uint32_t
-csio_read_pcie_cfg4(struct csio_hw *hw, int reg)
-{
- u32 val = 0;
- struct csio_mb *mbp;
- int rv;
- struct fw_ldst_cmd *ldst_cmd;
-
- mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC);
- if (!mbp) {
- CSIO_INC_STATS(hw, n_err_nomem);
- pci_read_config_dword(hw->pdev, reg, &val);
- return val;
- }
-
- csio_mb_ldst(hw, mbp, CSIO_MB_DEFAULT_TMO, reg);
-
- rv = csio_mb_issue(hw, mbp);
-
- /*
- * If the LDST Command suucceeded, exctract the returned register
- * value. Otherwise read it directly ourself.
- */
- if (rv == 0) {
- ldst_cmd = (struct fw_ldst_cmd *)(mbp->mb);
- val = ntohl(ldst_cmd->u.pcie.data[0]);
- } else
- pci_read_config_dword(hw->pdev, reg, &val);
-
- mempool_free(mbp, hw->mb_mempool);
-
- return val;
-} /* csio_read_pcie_cfg4 */
-
-static int
-csio_hw_set_mem_win(struct csio_hw *hw)
-{
- u32 bar0;
-
- /*
- * Truncation intentional: we only read the bottom 32-bits of the
- * 64-bit BAR0/BAR1 ... We use the hardware backdoor mechanism to
- * read BAR0 instead of using pci_resource_start() because we could be
- * operating from within a Virtual Machine which is trapping our
- * accesses to our Configuration Space and we need to set up the PCI-E
- * Memory Window decoders with the actual addresses which will be
- * coming across the PCI-E link.
- */
- bar0 = csio_read_pcie_cfg4(hw, PCI_BASE_ADDRESS_0);
- bar0 &= PCI_BASE_ADDRESS_MEM_MASK;
-
- /*
- * Set up memory window for accessing adapter memory ranges. (Read
- * back MA register to ensure that changes propagate before we attempt
- * to use the new values.)
- */
- csio_wr_reg32(hw, (bar0 + MEMWIN0_BASE) | BIR(0) |
- WINDOW(ilog2(MEMWIN0_APERTURE) - 10),
- PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN, 0));
- csio_wr_reg32(hw, (bar0 + MEMWIN1_BASE) | BIR(0) |
- WINDOW(ilog2(MEMWIN1_APERTURE) - 10),
- PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN, 1));
- csio_wr_reg32(hw, (bar0 + MEMWIN2_BASE) | BIR(0) |
- WINDOW(ilog2(MEMWIN2_APERTURE) - 10),
- PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN, 2));
- csio_rd_reg32(hw, PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN, 2));
- return 0;
-} /* csio_hw_set_mem_win */
-
-
-
/*****************************************************************************/
/* HW State machine assists */
/*****************************************************************************/
for (;;) {
uint32_t pcie_fw;
+ spin_unlock_irq(&hw->lock);
msleep(50);
+ spin_lock_irq(&hw->lock);
waiting -= 50;
/*
uint32_t *cfg_data;
int value_to_add = 0;
- if (request_firmware(&cf, CSIO_CF_FNAME, dev) < 0) {
- csio_err(hw, "could not find config file " CSIO_CF_FNAME
- ",err: %d\n", ret);
+ if (request_firmware(&cf, CSIO_CF_FNAME(hw), dev) < 0) {
+ csio_err(hw, "could not find config file %s, err: %d\n",
+ CSIO_CF_FNAME(hw), ret);
return -ENOENT;
}
ret = csio_memory_write(hw, mtype, maddr,
cf->size + value_to_add, cfg_data);
+
+ if ((ret == 0) && (value_to_add != 0)) {
+ union {
+ u32 word;
+ char buf[4];
+ } last;
+ size_t size = cf->size & ~0x3;
+ int i;
+
+ last.word = cfg_data[size >> 2];
+ for (i = value_to_add; i < 4; i++)
+ last.buf[i] = 0;
+ ret = csio_memory_write(hw, mtype, maddr + size, 4, &last.word);
+ }
if (ret == 0) {
- csio_info(hw, "config file upgraded to " CSIO_CF_FNAME "\n");
- strncpy(path, "/lib/firmware/" CSIO_CF_FNAME, 64);
+ csio_info(hw, "config file upgraded to %s\n",
+ CSIO_CF_FNAME(hw));
+ snprintf(path, 64, "%s%s", "/lib/firmware/", CSIO_CF_FNAME(hw));
}
leave:
{
unsigned int mtype, maddr;
int rv;
- uint32_t finiver, finicsum, cfcsum;
+ uint32_t finiver = 0, finicsum = 0, cfcsum = 0;
int using_flash;
char path[64];
* config file from flash.
*/
mtype = FW_MEMTYPE_CF_FLASH;
- maddr = csio_hw_flash_cfg_addr(hw);
+ maddr = hw->chip_ops->chip_flash_cfg_addr(hw);
using_flash = 1;
} else {
/*
struct pci_dev *pci_dev = hw->pdev;
struct device *dev = &pci_dev->dev ;
- if (request_firmware(&fw, CSIO_FW_FNAME, dev) < 0) {
- csio_err(hw, "could not find firmware image " CSIO_FW_FNAME
- ",err: %d\n", ret);
+ if (request_firmware(&fw, CSIO_FW_FNAME(hw), dev) < 0) {
+ csio_err(hw, "could not find firmware image %s, err: %d\n",
+ CSIO_FW_FNAME(hw), ret);
return -EINVAL;
}
hdr = (const struct fw_hdr *)fw->data;
fw_ver = ntohl(hdr->fw_ver);
- if (FW_HDR_FW_VER_MAJOR_GET(fw_ver) != FW_VERSION_MAJOR)
+ if (FW_HDR_FW_VER_MAJOR_GET(fw_ver) != FW_VERSION_MAJOR(hw))
return -EINVAL; /* wrong major version, won't do */
/*
* If the flash FW is unusable or we found something newer, load it.
*/
- if (FW_HDR_FW_VER_MAJOR_GET(hw->fwrev) != FW_VERSION_MAJOR ||
+ if (FW_HDR_FW_VER_MAJOR_GET(hw->fwrev) != FW_VERSION_MAJOR(hw) ||
fw_ver > hw->fwrev) {
ret = csio_hw_fw_upgrade(hw, hw->pfn, fw->data, fw->size,
/*force=*/false);
if (!ret)
- csio_info(hw, "firmware upgraded to version %pI4 from "
- CSIO_FW_FNAME "\n", &hdr->fw_ver);
+ csio_info(hw,
+ "firmware upgraded to version %pI4 from %s\n",
+ &hdr->fw_ver, CSIO_FW_FNAME(hw));
else
csio_err(hw, "firmware upgrade failed! err=%d\n", ret);
- }
+ } else
+ ret = -EINVAL;
release_firmware(fw);
/* Set pci completion timeout value to 4 seconds. */
csio_set_pcie_completion_timeout(hw, 0xd);
- csio_hw_set_mem_win(hw);
+ hw->chip_ops->chip_set_mem_win(hw, MEMWIN_CSIOSTOR);
rv = csio_hw_get_fw_version(hw, &hw->fwrev);
if (rv != 0)
} else {
if (hw->fw_state == CSIO_DEV_STATE_INIT) {
+ hw->flags |= CSIO_HWF_USING_SOFT_PARAMS;
+
/* device parameters */
rv = csio_get_device_params(hw);
if (rv != 0)
}
-static void
+void
csio_hw_fatal_err(struct csio_hw *hw)
{
csio_set_reg_field(hw, SGE_CONTROL, GLOBALENABLE, 0);
/* END: HW SM */
/*****************************************************************************/
-/* Slow path handlers */
-struct intr_info {
- unsigned int mask; /* bits to check in interrupt status */
- const char *msg; /* message to print or NULL */
- short stat_idx; /* stat counter to increment or -1 */
- unsigned short fatal; /* whether the condition reported is fatal */
-};
-
/*
* csio_handle_intr_status - table driven interrupt handler
* @hw: HW instance
* by an entry specifying mask 0. Returns the number of fatal interrupt
* conditions.
*/
-static int
+int
csio_handle_intr_status(struct csio_hw *hw, unsigned int reg,
const struct intr_info *acts)
{
return fatal;
}
-/*
- * Interrupt handler for the PCIE module.
- */
-static void
-csio_pcie_intr_handler(struct csio_hw *hw)
-{
- static struct intr_info sysbus_intr_info[] = {
- { RNPP, "RXNP array parity error", -1, 1 },
- { RPCP, "RXPC array parity error", -1, 1 },
- { RCIP, "RXCIF array parity error", -1, 1 },
- { RCCP, "Rx completions control array parity error", -1, 1 },
- { RFTP, "RXFT array parity error", -1, 1 },
- { 0, NULL, 0, 0 }
- };
- static struct intr_info pcie_port_intr_info[] = {
- { TPCP, "TXPC array parity error", -1, 1 },
- { TNPP, "TXNP array parity error", -1, 1 },
- { TFTP, "TXFT array parity error", -1, 1 },
- { TCAP, "TXCA array parity error", -1, 1 },
- { TCIP, "TXCIF array parity error", -1, 1 },
- { RCAP, "RXCA array parity error", -1, 1 },
- { OTDD, "outbound request TLP discarded", -1, 1 },
- { RDPE, "Rx data parity error", -1, 1 },
- { TDUE, "Tx uncorrectable data error", -1, 1 },
- { 0, NULL, 0, 0 }
- };
- static struct intr_info pcie_intr_info[] = {
- { MSIADDRLPERR, "MSI AddrL parity error", -1, 1 },
- { MSIADDRHPERR, "MSI AddrH parity error", -1, 1 },
- { MSIDATAPERR, "MSI data parity error", -1, 1 },
- { MSIXADDRLPERR, "MSI-X AddrL parity error", -1, 1 },
- { MSIXADDRHPERR, "MSI-X AddrH parity error", -1, 1 },
- { MSIXDATAPERR, "MSI-X data parity error", -1, 1 },
- { MSIXDIPERR, "MSI-X DI parity error", -1, 1 },
- { PIOCPLPERR, "PCI PIO completion FIFO parity error", -1, 1 },
- { PIOREQPERR, "PCI PIO request FIFO parity error", -1, 1 },
- { TARTAGPERR, "PCI PCI target tag FIFO parity error", -1, 1 },
- { CCNTPERR, "PCI CMD channel count parity error", -1, 1 },
- { CREQPERR, "PCI CMD channel request parity error", -1, 1 },
- { CRSPPERR, "PCI CMD channel response parity error", -1, 1 },
- { DCNTPERR, "PCI DMA channel count parity error", -1, 1 },
- { DREQPERR, "PCI DMA channel request parity error", -1, 1 },
- { DRSPPERR, "PCI DMA channel response parity error", -1, 1 },
- { HCNTPERR, "PCI HMA channel count parity error", -1, 1 },
- { HREQPERR, "PCI HMA channel request parity error", -1, 1 },
- { HRSPPERR, "PCI HMA channel response parity error", -1, 1 },
- { CFGSNPPERR, "PCI config snoop FIFO parity error", -1, 1 },
- { FIDPERR, "PCI FID parity error", -1, 1 },
- { INTXCLRPERR, "PCI INTx clear parity error", -1, 1 },
- { MATAGPERR, "PCI MA tag parity error", -1, 1 },
- { PIOTAGPERR, "PCI PIO tag parity error", -1, 1 },
- { RXCPLPERR, "PCI Rx completion parity error", -1, 1 },
- { RXWRPERR, "PCI Rx write parity error", -1, 1 },
- { RPLPERR, "PCI replay buffer parity error", -1, 1 },
- { PCIESINT, "PCI core secondary fault", -1, 1 },
- { PCIEPINT, "PCI core primary fault", -1, 1 },
- { UNXSPLCPLERR, "PCI unexpected split completion error", -1,
- 0 },
- { 0, NULL, 0, 0 }
- };
-
- int fat;
-
- fat = csio_handle_intr_status(hw,
- PCIE_CORE_UTL_SYSTEM_BUS_AGENT_STATUS,
- sysbus_intr_info) +
- csio_handle_intr_status(hw,
- PCIE_CORE_UTL_PCI_EXPRESS_PORT_STATUS,
- pcie_port_intr_info) +
- csio_handle_intr_status(hw, PCIE_INT_CAUSE, pcie_intr_info);
- if (fat)
- csio_hw_fatal_err(hw);
-}
-
/*
* TP interrupt handler.
*/
*/
static void csio_xgmac_intr_handler(struct csio_hw *hw, int port)
{
- uint32_t v = csio_rd_reg32(hw, PORT_REG(port, XGMAC_PORT_INT_CAUSE));
+ uint32_t v = csio_rd_reg32(hw, CSIO_MAC_INT_CAUSE_REG(hw, port));
v &= TXFIFO_PRTY_ERR | RXFIFO_PRTY_ERR;
if (!v)
csio_fatal(hw, "XGMAC %d Tx FIFO parity error\n", port);
if (v & RXFIFO_PRTY_ERR)
csio_fatal(hw, "XGMAC %d Rx FIFO parity error\n", port);
- csio_wr_reg32(hw, v, PORT_REG(port, XGMAC_PORT_INT_CAUSE));
+ csio_wr_reg32(hw, v, CSIO_MAC_INT_CAUSE_REG(hw, port));
csio_hw_fatal_err(hw);
}
csio_xgmac_intr_handler(hw, 3);
if (cause & PCIE)
- csio_pcie_intr_handler(hw);
+ hw->chip_ops->chip_pcie_intr_handler(hw);
if (cause & MC)
csio_mem_intr_handler(hw, MEM_MC);
&hw->params.pci.device_id);
csio_dev_id_cached(hw);
+ hw->chip_id = (hw->params.pci.device_id & CSIO_HW_CHIP_MASK);
} /* csio_hw_get_device_id */
prot_type = (dev_id & CSIO_ASIC_DEVID_PROTO_MASK);
adap_type = (dev_id & CSIO_ASIC_DEVID_TYPE_MASK);
- if (prot_type == CSIO_FPGA) {
+ if (prot_type == CSIO_T4_FCOE_ASIC) {
+ memcpy(hw->hw_ver,
+ csio_t4_fcoe_adapters[adap_type].model_no, 16);
memcpy(hw->model_desc,
- csio_fcoe_adapters[13].description, 32);
- } else if (prot_type == CSIO_T4_FCOE_ASIC) {
+ csio_t4_fcoe_adapters[adap_type].description,
+ 32);
+ } else if (prot_type == CSIO_T5_FCOE_ASIC) {
memcpy(hw->hw_ver,
- csio_fcoe_adapters[adap_type].model_no, 16);
+ csio_t5_fcoe_adapters[adap_type].model_no, 16);
memcpy(hw->model_desc,
- csio_fcoe_adapters[adap_type].description, 32);
+ csio_t5_fcoe_adapters[adap_type].description,
+ 32);
} else {
char tempName[32] = "Chelsio FCoE Controller";
memcpy(hw->model_desc, tempName, 32);
-
- CSIO_DB_ASSERT(0);
}
}
} /* csio_hw_set_description */
strcpy(hw->name, CSIO_HW_NAME);
+ /* Initialize the HW chip ops with T4/T5 specific ops */
+ hw->chip_ops = csio_is_t4(hw->chip_id) ? &t4_ops : &t5_ops;
+
/* Set the model & its description */
ven_id = hw->params.pci.vendor_id;
projects / firefly-linux-kernel-4.4.55.git / blobdiff