return status;
}
+/**
+ * lpfc_sli4_pdev_status_reg_wait - Wait for pdev status register for readyness
+ * @phba: lpfc_hba pointer.
+ *
+ * Description:
+ * SLI4 interface type-2 device to wait on the sliport status register for
+ * the readyness after performing a firmware reset.
+ *
+ * Returns:
+ * zero for success
+ **/
+static int
+lpfc_sli4_pdev_status_reg_wait(struct lpfc_hba *phba)
+{
+ struct lpfc_register portstat_reg;
+ int i;
+
+
+ lpfc_readl(phba->sli4_hba.u.if_type2.STATUSregaddr,
+ &portstat_reg.word0);
+
+ /* wait for the SLI port firmware ready after firmware reset */
+ for (i = 0; i < LPFC_FW_RESET_MAXIMUM_WAIT_10MS_CNT; i++) {
+ msleep(10);
+ lpfc_readl(phba->sli4_hba.u.if_type2.STATUSregaddr,
+ &portstat_reg.word0);
+ if (!bf_get(lpfc_sliport_status_err, &portstat_reg))
+ continue;
+ if (!bf_get(lpfc_sliport_status_rn, &portstat_reg))
+ continue;
+ if (!bf_get(lpfc_sliport_status_rdy, &portstat_reg))
+ continue;
+ break;
+ }
+
+ if (i < LPFC_FW_RESET_MAXIMUM_WAIT_10MS_CNT)
+ return 0;
+ else
+ return -EIO;
+}
+
+/**
+ * lpfc_sli4_pdev_reg_request - Request physical dev to perform a register acc
+ * @phba: lpfc_hba pointer.
+ *
+ * Description:
+ * Request SLI4 interface type-2 device to perform a physical register set
+ * access.
+ *
+ * Returns:
+ * zero for success
+ **/
+static ssize_t
+lpfc_sli4_pdev_reg_request(struct lpfc_hba *phba, uint32_t opcode)
+{
+ struct completion online_compl;
+ uint32_t reg_val;
+ int status = 0;
+ int rc;
+
+ if (!phba->cfg_enable_hba_reset)
+ return -EIO;
+
+ if ((phba->sli_rev < LPFC_SLI_REV4) ||
+ (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
+ LPFC_SLI_INTF_IF_TYPE_2))
+ return -EPERM;
+
+ status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE);
+
+ if (status != 0)
+ return status;
+
+ /* wait for the device to be quiesced before firmware reset */
+ msleep(100);
+
+ reg_val = readl(phba->sli4_hba.conf_regs_memmap_p +
+ LPFC_CTL_PDEV_CTL_OFFSET);
+
+ if (opcode == LPFC_FW_DUMP)
+ reg_val |= LPFC_FW_DUMP_REQUEST;
+ else if (opcode == LPFC_FW_RESET)
+ reg_val |= LPFC_CTL_PDEV_CTL_FRST;
+ else if (opcode == LPFC_DV_RESET)
+ reg_val |= LPFC_CTL_PDEV_CTL_DRST;
+
+ writel(reg_val, phba->sli4_hba.conf_regs_memmap_p +
+ LPFC_CTL_PDEV_CTL_OFFSET);
+ /* flush */
+ readl(phba->sli4_hba.conf_regs_memmap_p + LPFC_CTL_PDEV_CTL_OFFSET);
+
+ /* delay driver action following IF_TYPE_2 reset */
+ rc = lpfc_sli4_pdev_status_reg_wait(phba);
+
+ if (rc)
+ return -EIO;
+
+ init_completion(&online_compl);
+ rc = lpfc_workq_post_event(phba, &status, &online_compl,
+ LPFC_EVT_ONLINE);
+ if (rc == 0)
+ return -ENOMEM;
+
+ wait_for_completion(&online_compl);
+
+ if (status != 0)
+ return -EIO;
+
+ return 0;
+}
+
/**
* lpfc_nport_evt_cnt_show - Return the number of nport events
* @dev: class device that is converted into a Scsi_host.
if (!phba->cfg_enable_hba_reset)
return -EACCES;
+
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+ "3050 lpfc_board_mode set to %s\n", buf);
+
init_completion(&online_compl);
if(strncmp(buf, "online", sizeof("online") - 1) == 0) {
return -EINVAL;
else
status = lpfc_do_offline(phba, LPFC_EVT_KILL);
+ else if (strncmp(buf, "dump", sizeof("dump") - 1) == 0)
+ status = lpfc_sli4_pdev_reg_request(phba, LPFC_FW_DUMP);
+ else if (strncmp(buf, "fw_reset", sizeof("fw_reset") - 1) == 0)
+ status = lpfc_sli4_pdev_reg_request(phba, LPFC_FW_RESET);
+ else if (strncmp(buf, "dv_reset", sizeof("dv_reset") - 1) == 0)
+ status = lpfc_sli4_pdev_reg_request(phba, LPFC_DV_RESET);
else
return -EINVAL;
if (phba->sli_rev == LPFC_SLI_REV4)
val = 0;
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+ "3051 lpfc_poll changed from %d to %d\n",
+ phba->cfg_poll, val);
+
spin_lock_irq(&phba->hbalock);
old_val = phba->cfg_poll;
"" : "Not ");
}
+/**
+ * lpfc_sriov_hw_max_virtfn_show - Return maximum number of virtual functions
+ * @dev: class converted to a Scsi_host structure.
+ * @attr: device attribute, not used.
+ * @buf: on return contains the formatted support level.
+ *
+ * Description:
+ * Returns the maximum number of virtual functions a physical function can
+ * support, 0 will be returned if called on virtual function.
+ *
+ * Returns: size of formatted string.
+ **/
+static ssize_t
+lpfc_sriov_hw_max_virtfn_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+ struct lpfc_hba *phba = vport->phba;
+ uint16_t max_nr_virtfn;
+
+ max_nr_virtfn = lpfc_sli_sriov_nr_virtfn_get(phba);
+ return snprintf(buf, PAGE_SIZE, "%d\n", max_nr_virtfn);
+}
+
/**
* lpfc_param_show - Return a cfg attribute value in decimal
*
lpfc_##attr##_set(struct lpfc_hba *phba, uint val) \
{ \
if (val >= minval && val <= maxval) {\
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT, \
+ "3052 lpfc_" #attr " changed from %d to %d\n", \
+ phba->cfg_##attr, val); \
phba->cfg_##attr = val;\
return 0;\
}\
lpfc_##attr##_set(struct lpfc_vport *vport, uint val) \
{ \
if (val >= minval && val <= maxval) {\
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, \
+ "3053 lpfc_" #attr " changed from %d to %d\n", \
+ vport->cfg_##attr, val); \
vport->cfg_##attr = val;\
return 0;\
}\
static DEVICE_ATTR(lpfc_fips_level, S_IRUGO, lpfc_fips_level_show, NULL);
static DEVICE_ATTR(lpfc_fips_rev, S_IRUGO, lpfc_fips_rev_show, NULL);
static DEVICE_ATTR(lpfc_dss, S_IRUGO, lpfc_dss_show, NULL);
+static DEVICE_ATTR(lpfc_sriov_hw_max_virtfn, S_IRUGO,
+ lpfc_sriov_hw_max_virtfn_show, NULL);
static char *lpfc_soft_wwn_key = "C99G71SL8032A";
if (nolip)
return strlen(buf);
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+ "3054 lpfc_topology changed from %d to %d\n",
+ prev_val, val);
err = lpfc_issue_lip(lpfc_shost_from_vport(phba->pport));
if (err) {
phba->cfg_topology = prev_val;
if (sscanf(val_buf, "%i", &val) != 1)
return -EINVAL;
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+ "3055 lpfc_link_speed changed from %d to %d %s\n",
+ phba->cfg_link_speed, val, nolip ? "(nolip)" : "(lip)");
+
if (((val == LPFC_USER_LINK_SPEED_1G) && !(phba->lmt & LMT_1Gb)) ||
((val == LPFC_USER_LINK_SPEED_2G) && !(phba->lmt & LMT_2Gb)) ||
((val == LPFC_USER_LINK_SPEED_4G) && !(phba->lmt & LMT_4Gb)) ||
*
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
- * @buf: containing the string "selective".
+ * @buf: containing enable or disable aer flag.
* @count: unused variable.
*
* Description:
/**
* lpfc_aer_support_init - Set the initial adapters aer support flag
* @phba: lpfc_hba pointer.
- * @val: link speed value.
+ * @val: enable aer or disable aer flag.
*
* Description:
* If val is in a valid range [0,1], then set the adapter's initial
* lpfc_aer_cleanup_state - Clean up aer state to the aer enabled device
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
- * @buf: containing the string "selective".
+ * @buf: containing flag 1 for aer cleanup state.
* @count: unused variable.
*
* Description:
static DEVICE_ATTR(lpfc_aer_state_cleanup, S_IWUSR, NULL,
lpfc_aer_cleanup_state);
+/**
+ * lpfc_sriov_nr_virtfn_store - Enable the adapter for sr-iov virtual functions
+ *
+ * @dev: class device that is converted into a Scsi_host.
+ * @attr: device attribute, not used.
+ * @buf: containing the string the number of vfs to be enabled.
+ * @count: unused variable.
+ *
+ * Description:
+ * When this api is called either through user sysfs, the driver shall
+ * try to enable or disable SR-IOV virtual functions according to the
+ * following:
+ *
+ * If zero virtual function has been enabled to the physical function,
+ * the driver shall invoke the pci enable virtual function api trying
+ * to enable the virtual functions. If the nr_vfn provided is greater
+ * than the maximum supported, the maximum virtual function number will
+ * be used for invoking the api; otherwise, the nr_vfn provided shall
+ * be used for invoking the api. If the api call returned success, the
+ * actual number of virtual functions enabled will be set to the driver
+ * cfg_sriov_nr_virtfn; otherwise, -EINVAL shall be returned and driver
+ * cfg_sriov_nr_virtfn remains zero.
+ *
+ * If none-zero virtual functions have already been enabled to the
+ * physical function, as reflected by the driver's cfg_sriov_nr_virtfn,
+ * -EINVAL will be returned and the driver does nothing;
+ *
+ * If the nr_vfn provided is zero and none-zero virtual functions have
+ * been enabled, as indicated by the driver's cfg_sriov_nr_virtfn, the
+ * disabling virtual function api shall be invoded to disable all the
+ * virtual functions and driver's cfg_sriov_nr_virtfn shall be set to
+ * zero. Otherwise, if zero virtual function has been enabled, do
+ * nothing.
+ *
+ * Returns:
+ * length of the buf on success if val is in range the intended mode
+ * is supported.
+ * -EINVAL if val out of range or intended mode is not supported.
+ **/
+static ssize_t
+lpfc_sriov_nr_virtfn_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata;
+ struct lpfc_hba *phba = vport->phba;
+ struct pci_dev *pdev = phba->pcidev;
+ int val = 0, rc = -EINVAL;
+
+ /* Sanity check on user data */
+ if (!isdigit(buf[0]))
+ return -EINVAL;
+ if (sscanf(buf, "%i", &val) != 1)
+ return -EINVAL;
+ if (val < 0)
+ return -EINVAL;
+
+ /* Request disabling virtual functions */
+ if (val == 0) {
+ if (phba->cfg_sriov_nr_virtfn > 0) {
+ pci_disable_sriov(pdev);
+ phba->cfg_sriov_nr_virtfn = 0;
+ }
+ return strlen(buf);
+ }
+
+ /* Request enabling virtual functions */
+ if (phba->cfg_sriov_nr_virtfn > 0) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "3018 There are %d virtual functions "
+ "enabled on physical function.\n",
+ phba->cfg_sriov_nr_virtfn);
+ return -EEXIST;
+ }
+
+ if (val <= LPFC_MAX_VFN_PER_PFN)
+ phba->cfg_sriov_nr_virtfn = val;
+ else {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "3019 Enabling %d virtual functions is not "
+ "allowed.\n", val);
+ return -EINVAL;
+ }
+
+ rc = lpfc_sli_probe_sriov_nr_virtfn(phba, phba->cfg_sriov_nr_virtfn);
+ if (rc) {
+ phba->cfg_sriov_nr_virtfn = 0;
+ rc = -EPERM;
+ } else
+ rc = strlen(buf);
+
+ return rc;
+}
+
+static int lpfc_sriov_nr_virtfn = LPFC_DEF_VFN_PER_PFN;
+module_param(lpfc_sriov_nr_virtfn, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(lpfc_sriov_nr_virtfn, "Enable PCIe device SR-IOV virtual fn");
+lpfc_param_show(sriov_nr_virtfn)
+
+/**
+ * lpfc_sriov_nr_virtfn_init - Set the initial sr-iov virtual function enable
+ * @phba: lpfc_hba pointer.
+ * @val: link speed value.
+ *
+ * Description:
+ * If val is in a valid range [0,255], then set the adapter's initial
+ * cfg_sriov_nr_virtfn field. If it's greater than the maximum, the maximum
+ * number shall be used instead. It will be up to the driver's probe_one
+ * routine to determine whether the device's SR-IOV is supported or not.
+ *
+ * Returns:
+ * zero if val saved.
+ * -EINVAL val out of range
+ **/
+static int
+lpfc_sriov_nr_virtfn_init(struct lpfc_hba *phba, int val)
+{
+ if (val >= 0 && val <= LPFC_MAX_VFN_PER_PFN) {
+ phba->cfg_sriov_nr_virtfn = val;
+ return 0;
+ }
+
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "3017 Enabling %d virtual functions is not "
+ "allowed.\n", val);
+ return -EINVAL;
+}
+static DEVICE_ATTR(lpfc_sriov_nr_virtfn, S_IRUGO | S_IWUSR,
+ lpfc_sriov_nr_virtfn_show, lpfc_sriov_nr_virtfn_store);
+
/*
# lpfc_fcp_class: Determines FC class to use for the FCP protocol.
# Value range is [2,3]. Default value is 3.
# - Default will result in registering capabilities for all profiles.
#
*/
-unsigned int lpfc_prot_mask = SHOST_DIF_TYPE1_PROTECTION;
+unsigned int lpfc_prot_mask = SHOST_DIF_TYPE1_PROTECTION |
+ SHOST_DIX_TYPE0_PROTECTION |
+ SHOST_DIX_TYPE1_PROTECTION;
module_param(lpfc_prot_mask, uint, S_IRUGO);
MODULE_PARM_DESC(lpfc_prot_mask, "host protection mask");
&dev_attr_lpfc_prot_sg_seg_cnt,
&dev_attr_lpfc_aer_support,
&dev_attr_lpfc_aer_state_cleanup,
+ &dev_attr_lpfc_sriov_nr_virtfn,
&dev_attr_lpfc_suppress_link_up,
&dev_attr_lpfc_iocb_cnt,
&dev_attr_iocb_hw,
&dev_attr_lpfc_fips_level,
&dev_attr_lpfc_fips_rev,
&dev_attr_lpfc_dss,
+ &dev_attr_lpfc_sriov_hw_max_virtfn,
NULL,
};
.name = "mbox",
.mode = S_IRUSR | S_IWUSR,
},
- .size = MAILBOX_CMD_SIZE,
+ .size = MAILBOX_SYSFS_MAX,
.read = sysfs_mbox_read,
.write = sysfs_mbox_write,
};
lpfc_hba_queue_depth_init(phba, lpfc_hba_queue_depth);
lpfc_hba_log_verbose_init(phba, lpfc_log_verbose);
lpfc_aer_support_init(phba, lpfc_aer_support);
+ lpfc_sriov_nr_virtfn_init(phba, lpfc_sriov_nr_virtfn);
lpfc_suppress_link_up_init(phba, lpfc_suppress_link_up);
lpfc_iocb_cnt_init(phba, lpfc_iocb_cnt);
phba->cfg_enable_dss = 1;