#include <linux/ctype.h>
#include <linux/aer.h>
#include <linux/slab.h>
+#include <linux/firmware.h>
#include <scsi/scsi.h>
#include <scsi/scsi_device.h>
lpfc_vpd_data = kmalloc(DMP_VPD_SIZE, GFP_KERNEL);
if (!lpfc_vpd_data)
goto out_free_mbox;
-
do {
lpfc_dump_mem(phba, pmb, offset, DMP_REGION_VPD);
rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
return;
}
+/**
+ * lpfc_update_vport_wwn - Updates the fc_nodename, fc_portname,
+ * cfg_soft_wwnn, cfg_soft_wwpn
+ * @vport: pointer to lpfc vport data structure.
+ *
+ *
+ * Return codes
+ * None.
+ **/
+void
+lpfc_update_vport_wwn(struct lpfc_vport *vport)
+{
+ /* If the soft name exists then update it using the service params */
+ if (vport->phba->cfg_soft_wwnn)
+ u64_to_wwn(vport->phba->cfg_soft_wwnn,
+ vport->fc_sparam.nodeName.u.wwn);
+ if (vport->phba->cfg_soft_wwpn)
+ u64_to_wwn(vport->phba->cfg_soft_wwpn,
+ vport->fc_sparam.portName.u.wwn);
+
+ /*
+ * If the name is empty or there exists a soft name
+ * then copy the service params name, otherwise use the fc name
+ */
+ if (vport->fc_nodename.u.wwn[0] == 0 || vport->phba->cfg_soft_wwnn)
+ memcpy(&vport->fc_nodename, &vport->fc_sparam.nodeName,
+ sizeof(struct lpfc_name));
+ else
+ memcpy(&vport->fc_sparam.nodeName, &vport->fc_nodename,
+ sizeof(struct lpfc_name));
+
+ if (vport->fc_portname.u.wwn[0] == 0 || vport->phba->cfg_soft_wwpn)
+ memcpy(&vport->fc_portname, &vport->fc_sparam.portName,
+ sizeof(struct lpfc_name));
+ else
+ memcpy(&vport->fc_sparam.portName, &vport->fc_portname,
+ sizeof(struct lpfc_name));
+}
+
/**
* lpfc_config_port_post - Perform lpfc initialization after config port
* @phba: pointer to lpfc hba data structure.
lpfc_mbuf_free(phba, mp->virt, mp->phys);
kfree(mp);
pmb->context1 = NULL;
-
- if (phba->cfg_soft_wwnn)
- u64_to_wwn(phba->cfg_soft_wwnn,
- vport->fc_sparam.nodeName.u.wwn);
- if (phba->cfg_soft_wwpn)
- u64_to_wwn(phba->cfg_soft_wwpn,
- vport->fc_sparam.portName.u.wwn);
- memcpy(&vport->fc_nodename, &vport->fc_sparam.nodeName,
- sizeof (struct lpfc_name));
- memcpy(&vport->fc_portname, &vport->fc_sparam.portName,
- sizeof (struct lpfc_name));
+ lpfc_update_vport_wwn(vport);
/* Update the fc_host data structures with new wwn. */
fc_host_node_name(shost) = wwn_to_u64(vport->fc_nodename.u.wwn);
/* Clear all pending interrupts */
writel(0xffffffff, phba->HAregaddr);
readl(phba->HAregaddr); /* flush */
-
phba->link_state = LPFC_HBA_ERROR;
if (rc != MBX_BUSY)
mempool_free(pmb, phba->mbox_mem_pool);
&& descp && descp[0] != '\0')
return;
- if (phba->lmt & LMT_10Gb)
+ if (phba->lmt & LMT_16Gb)
+ max_speed = 16;
+ else if (phba->lmt & LMT_10Gb)
max_speed = 10;
else if (phba->lmt & LMT_8Gb)
max_speed = 8;
"Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_LANCER_FC:
- oneConnect = 1;
- m = (typeof(m)){"Undefined", "PCIe", "Fibre Channel Adapter"};
+ case PCI_DEVICE_ID_LANCER_FC_VF:
+ m = (typeof(m)){"LPe16000", "PCIe", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_LANCER_FCOE:
+ case PCI_DEVICE_ID_LANCER_FCOE_VF:
oneConnect = 1;
- m = (typeof(m)){"Undefined", "PCIe", "FCoE"};
+ m = (typeof(m)){"OCe50100", "PCIe", "FCoE"};
break;
default:
m = (typeof(m)){"Unknown", "", ""};
if (mdp && mdp[0] == '\0')
snprintf(mdp, 79,"%s", m.name);
- /* oneConnect hba requires special processing, they are all initiators
+ /*
+ * oneConnect hba requires special processing, they are all initiators
* and we put the port number on the end
*/
if (descp && descp[0] == '\0') {
kfree(io);
phba->total_iocbq_bufs--;
}
+
spin_unlock_irq(&phba->hbalock);
return 0;
}
sizeof fc_host_symbolic_name(shost));
fc_host_supported_speeds(shost) = 0;
+ if (phba->lmt & LMT_16Gb)
+ fc_host_supported_speeds(shost) |= FC_PORTSPEED_16GBIT;
if (phba->lmt & LMT_10Gb)
fc_host_supported_speeds(shost) |= FC_PORTSPEED_10GBIT;
if (phba->lmt & LMT_8Gb)
lpfc_printf_log(phba, KERN_ERR, LOG_FIP | LOG_DISCOVERY,
"2718 Clear Virtual Link Received for VPI 0x%x"
" tag 0x%x\n", acqe_fip->index, acqe_fip->event_tag);
+
vport = lpfc_find_vport_by_vpid(phba,
- acqe_fip->index - phba->vpi_base);
+ acqe_fip->index);
ndlp = lpfc_sli4_perform_vport_cvl(vport);
if (!ndlp)
break;
pci_try_set_mwi(pdev);
pci_save_state(pdev);
+ /* PCIe EEH recovery on powerpc platforms needs fundamental reset */
+ if (pci_find_capability(pdev, PCI_CAP_ID_EXP))
+ pdev->needs_freset = 1;
+
return 0;
out_disable_device:
lpfc_unblock_mgmt_io(phba);
}
+/**
+ * lpfc_sli_sriov_nr_virtfn_get - Get the number of sr-iov virtual functions
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This function enables the PCI SR-IOV virtual functions to a physical
+ * function. It invokes the PCI SR-IOV api with the @nr_vfn provided to
+ * enable the number of virtual functions to the physical function. As
+ * not all devices support SR-IOV, the return code from the pci_enable_sriov()
+ * API call does not considered as an error condition for most of the device.
+ **/
+uint16_t
+lpfc_sli_sriov_nr_virtfn_get(struct lpfc_hba *phba)
+{
+ struct pci_dev *pdev = phba->pcidev;
+ uint16_t nr_virtfn;
+ int pos;
+
+ if (!pdev->is_physfn)
+ return 0;
+
+ pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_SRIOV);
+ if (pos == 0)
+ return 0;
+
+ pci_read_config_word(pdev, pos + PCI_SRIOV_TOTAL_VF, &nr_virtfn);
+ return nr_virtfn;
+}
+
+/**
+ * lpfc_sli_probe_sriov_nr_virtfn - Enable a number of sr-iov virtual functions
+ * @phba: pointer to lpfc hba data structure.
+ * @nr_vfn: number of virtual functions to be enabled.
+ *
+ * This function enables the PCI SR-IOV virtual functions to a physical
+ * function. It invokes the PCI SR-IOV api with the @nr_vfn provided to
+ * enable the number of virtual functions to the physical function. As
+ * not all devices support SR-IOV, the return code from the pci_enable_sriov()
+ * API call does not considered as an error condition for most of the device.
+ **/
+int
+lpfc_sli_probe_sriov_nr_virtfn(struct lpfc_hba *phba, int nr_vfn)
+{
+ struct pci_dev *pdev = phba->pcidev;
+ uint16_t max_nr_vfn;
+ int rc;
+
+ max_nr_vfn = lpfc_sli_sriov_nr_virtfn_get(phba);
+ if (nr_vfn > max_nr_vfn) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "3057 Requested vfs (%d) greater than "
+ "supported vfs (%d)", nr_vfn, max_nr_vfn);
+ return -EINVAL;
+ }
+
+ rc = pci_enable_sriov(pdev, nr_vfn);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+ "2806 Failed to enable sriov on this device "
+ "with vfn number nr_vf:%d, rc:%d\n",
+ nr_vfn, rc);
+ } else
+ lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+ "2807 Successful enable sriov on this device "
+ "with vfn number nr_vf:%d\n", nr_vfn);
+ return rc;
+}
+
/**
* lpfc_sli_driver_resource_setup - Setup driver internal resources for SLI3 dev.
* @phba: pointer to lpfc hba data structure.
lpfc_sli_driver_resource_setup(struct lpfc_hba *phba)
{
struct lpfc_sli *psli;
+ int rc;
/*
* Initialize timers used by driver
if (lpfc_mem_alloc(phba, BPL_ALIGN_SZ))
return -ENOMEM;
+ /*
+ * Enable sr-iov virtual functions if supported and configured
+ * through the module parameter.
+ */
+ if (phba->cfg_sriov_nr_virtfn > 0) {
+ rc = lpfc_sli_probe_sriov_nr_virtfn(phba,
+ phba->cfg_sriov_nr_virtfn);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+ "2808 Requested number of SR-IOV "
+ "virtual functions (%d) is not "
+ "supported\n",
+ phba->cfg_sriov_nr_virtfn);
+ phba->cfg_sriov_nr_virtfn = 0;
+ }
+ }
+
return 0;
}
phba->fcf.redisc_wait.function = lpfc_sli4_fcf_redisc_wait_tmo;
phba->fcf.redisc_wait.data = (unsigned long)phba;
+ /*
+ * Control structure for handling external multi-buffer mailbox
+ * command pass-through.
+ */
+ memset((uint8_t *)&phba->mbox_ext_buf_ctx, 0,
+ sizeof(struct lpfc_mbox_ext_buf_ctx));
+ INIT_LIST_HEAD(&phba->mbox_ext_buf_ctx.ext_dmabuf_list);
+
/*
* We need to do a READ_CONFIG mailbox command here before
* calling lpfc_get_cfgparam. For VFs this will report the
spin_lock_init(&phba->sli4_hba.abts_sgl_list_lock);
/*
- * Initialize dirver internal slow-path work queues
+ * Initialize driver internal slow-path work queues
*/
/* Driver internel slow-path CQ Event pool */
/* Receive queue CQ Event work queue list */
INIT_LIST_HEAD(&phba->sli4_hba.sp_unsol_work_queue);
+ /* Initialize extent block lists. */
+ INIT_LIST_HEAD(&phba->sli4_hba.lpfc_rpi_blk_list);
+ INIT_LIST_HEAD(&phba->sli4_hba.lpfc_xri_blk_list);
+ INIT_LIST_HEAD(&phba->sli4_hba.lpfc_vfi_blk_list);
+ INIT_LIST_HEAD(&phba->lpfc_vpi_blk_list);
+
/* Initialize the driver internal SLI layer lists. */
lpfc_sli_setup(phba);
lpfc_sli_queue_setup(phba);
}
/*
* Get sli4 parameters that override parameters from Port capabilities.
- * If this call fails it is not a critical error so continue loading.
+ * If this call fails, it isn't critical unless the SLI4 parameters come
+ * back in conflict.
*/
- lpfc_get_sli4_parameters(phba, mboxq);
+ rc = lpfc_get_sli4_parameters(phba, mboxq);
+ if (rc) {
+ if (phba->sli4_hba.extents_in_use &&
+ phba->sli4_hba.rpi_hdrs_in_use) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2999 Unsupported SLI4 Parameters "
+ "Extents and RPI headers enabled.\n");
+ goto out_free_bsmbx;
+ }
+ }
mempool_free(mboxq, phba->mbox_mem_pool);
/* Create all the SLI4 queues */
rc = lpfc_sli4_queue_create(phba);
"1430 Failed to initialize sgl list.\n");
goto out_free_sgl_list;
}
-
rc = lpfc_sli4_init_rpi_hdrs(phba);
if (rc) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2759 Failed allocate memory for FCF round "
"robin failover bmask\n");
+ rc = -ENOMEM;
goto out_remove_rpi_hdrs;
}
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2572 Failed allocate memory for fast-path "
"per-EQ handle array\n");
+ rc = -ENOMEM;
goto out_free_fcf_rr_bmask;
}
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2573 Failed allocate memory for msi-x "
"interrupt vector entries\n");
+ rc = -ENOMEM;
goto out_free_fcp_eq_hdl;
}
- return rc;
+ /*
+ * Enable sr-iov virtual functions if supported and configured
+ * through the module parameter.
+ */
+ if (phba->cfg_sriov_nr_virtfn > 0) {
+ rc = lpfc_sli_probe_sriov_nr_virtfn(phba,
+ phba->cfg_sriov_nr_virtfn);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+ "3020 Requested number of SR-IOV "
+ "virtual functions (%d) is not "
+ "supported\n",
+ phba->cfg_sriov_nr_virtfn);
+ phba->cfg_sriov_nr_virtfn = 0;
+ }
+ }
+
+ return 0;
out_free_fcp_eq_hdl:
kfree(phba->sli4_hba.fcp_eq_hdl);
lpfc_sli4_cq_event_release_all(phba);
lpfc_sli4_cq_event_pool_destroy(phba);
+ /* Release resource identifiers. */
+ lpfc_sli4_dealloc_resource_identifiers(phba);
+
/* Free the bsmbx region. */
lpfc_destroy_bootstrap_mbox(phba);
"Unloading driver.\n", __func__);
goto out_free_iocbq;
}
+ iocbq_entry->sli4_lxritag = NO_XRI;
iocbq_entry->sli4_xritag = NO_XRI;
spin_lock_irq(&phba->hbalock);
els_xri_cnt = lpfc_sli4_get_els_iocb_cnt(phba);
lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
- "2400 lpfc_init_sgl_list els %d.\n",
+ "2400 ELS XRI count %d.\n",
els_xri_cnt);
/* Initialize and populate the sglq list per host/VF. */
INIT_LIST_HEAD(&phba->sli4_hba.lpfc_sgl_list);
phba->sli4_hba.scsi_xri_max =
phba->sli4_hba.max_cfg_param.max_xri - els_xri_cnt;
phba->sli4_hba.scsi_xri_cnt = 0;
-
phba->sli4_hba.lpfc_scsi_psb_array =
kzalloc((sizeof(struct lpfc_scsi_buf *) *
phba->sli4_hba.scsi_xri_max), GFP_KERNEL);
goto out_free_mem;
}
- sglq_entry->sli4_xritag = lpfc_sli4_next_xritag(phba);
- if (sglq_entry->sli4_xritag == NO_XRI) {
- kfree(sglq_entry);
- printk(KERN_ERR "%s: failed to allocate XRI.\n"
- "Unloading driver.\n", __func__);
- goto out_free_mem;
- }
sglq_entry->buff_type = GEN_BUFF_TYPE;
sglq_entry->virt = lpfc_mbuf_alloc(phba, 0, &sglq_entry->phys);
if (sglq_entry->virt == NULL) {
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to post rpi header templates to the
- * HBA consistent with the SLI-4 interface spec. This routine
+ * port for those SLI4 ports that do not support extents. This routine
* posts a PAGE_SIZE memory region to the port to hold up to
- * PAGE_SIZE modulo 64 rpi context headers.
- * No locks are held here because this is an initialization routine
- * called only from probe or lpfc_online when interrupts are not
- * enabled and the driver is reinitializing the device.
+ * PAGE_SIZE modulo 64 rpi context headers. This is an initialization routine
+ * and should be called only when interrupts are disabled.
*
* Return codes
* 0 - successful
- * -ENOMEM - No available memory
- * -EIO - The mailbox failed to complete successfully.
+ * -ERROR - otherwise.
**/
int
lpfc_sli4_init_rpi_hdrs(struct lpfc_hba *phba)
{
int rc = 0;
- int longs;
- uint16_t rpi_count;
struct lpfc_rpi_hdr *rpi_hdr;
INIT_LIST_HEAD(&phba->sli4_hba.lpfc_rpi_hdr_list);
-
/*
- * Provision an rpi bitmask range for discovery. The total count
- * is the difference between max and base + 1.
+ * If the SLI4 port supports extents, posting the rpi header isn't
+ * required. Set the expected maximum count and let the actual value
+ * get set when extents are fully allocated.
*/
- rpi_count = phba->sli4_hba.max_cfg_param.rpi_base +
- phba->sli4_hba.max_cfg_param.max_rpi - 1;
-
- longs = ((rpi_count) + BITS_PER_LONG - 1) / BITS_PER_LONG;
- phba->sli4_hba.rpi_bmask = kzalloc(longs * sizeof(unsigned long),
- GFP_KERNEL);
- if (!phba->sli4_hba.rpi_bmask)
- return -ENOMEM;
+ if (!phba->sli4_hba.rpi_hdrs_in_use) {
+ phba->sli4_hba.next_rpi = phba->sli4_hba.max_cfg_param.max_rpi;
+ return rc;
+ }
+ if (phba->sli4_hba.extents_in_use)
+ return -EIO;
rpi_hdr = lpfc_sli4_create_rpi_hdr(phba);
if (!rpi_hdr) {
struct lpfc_rpi_hdr *rpi_hdr;
uint32_t rpi_count;
+ /*
+ * If the SLI4 port supports extents, posting the rpi header isn't
+ * required. Set the expected maximum count and let the actual value
+ * get set when extents are fully allocated.
+ */
+ if (!phba->sli4_hba.rpi_hdrs_in_use)
+ return NULL;
+ if (phba->sli4_hba.extents_in_use)
+ return NULL;
+
+ /* The limit on the logical index is just the max_rpi count. */
rpi_limit = phba->sli4_hba.max_cfg_param.rpi_base +
- phba->sli4_hba.max_cfg_param.max_rpi - 1;
+ phba->sli4_hba.max_cfg_param.max_rpi - 1;
spin_lock_irq(&phba->hbalock);
- curr_rpi_range = phba->sli4_hba.next_rpi;
+ /*
+ * Establish the starting RPI in this header block. The starting
+ * rpi is normalized to a zero base because the physical rpi is
+ * port based.
+ */
+ curr_rpi_range = phba->sli4_hba.next_rpi -
+ phba->sli4_hba.max_cfg_param.rpi_base;
spin_unlock_irq(&phba->hbalock);
/*
else
rpi_count = LPFC_RPI_HDR_COUNT;
+ if (!rpi_count)
+ return NULL;
/*
* First allocate the protocol header region for the port. The
* port expects a 4KB DMA-mapped memory region that is 4K aligned.
rpi_hdr->len = LPFC_HDR_TEMPLATE_SIZE;
rpi_hdr->page_count = 1;
spin_lock_irq(&phba->hbalock);
- rpi_hdr->start_rpi = phba->sli4_hba.next_rpi;
+
+ /* The rpi_hdr stores the logical index only. */
+ rpi_hdr->start_rpi = curr_rpi_range;
list_add_tail(&rpi_hdr->list, &phba->sli4_hba.lpfc_rpi_hdr_list);
/*
- * The next_rpi stores the next module-64 rpi value to post
- * in any subsequent rpi memory region postings.
+ * The next_rpi stores the next logical module-64 rpi value used
+ * to post physical rpis in subsequent rpi postings.
*/
phba->sli4_hba.next_rpi += rpi_count;
spin_unlock_irq(&phba->hbalock);
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to remove all memory resources allocated
- * to support rpis. This routine presumes the caller has released all
- * rpis consumed by fabric or port logins and is prepared to have
- * the header pages removed.
+ * to support rpis for SLI4 ports not supporting extents. This routine
+ * presumes the caller has released all rpis consumed by fabric or port
+ * logins and is prepared to have the header pages removed.
**/
void
lpfc_sli4_remove_rpi_hdrs(struct lpfc_hba *phba)
{
struct lpfc_rpi_hdr *rpi_hdr, *next_rpi_hdr;
+ if (!phba->sli4_hba.rpi_hdrs_in_use)
+ goto exit;
+
list_for_each_entry_safe(rpi_hdr, next_rpi_hdr,
&phba->sli4_hba.lpfc_rpi_hdr_list, list) {
list_del(&rpi_hdr->list);
kfree(rpi_hdr->dmabuf);
kfree(rpi_hdr);
}
-
- phba->sli4_hba.next_rpi = phba->sli4_hba.max_cfg_param.rpi_base;
- memset(phba->sli4_hba.rpi_bmask, 0, sizeof(*phba->sli4_hba.rpi_bmask));
+ exit:
+ /* There are no rpis available to the port now. */
+ phba->sli4_hba.next_rpi = 0;
}
/**
/* Final checks. The port status should be clean. */
if (lpfc_readl(phba->sli4_hba.u.if_type2.STATUSregaddr,
®_data.word0) ||
- bf_get(lpfc_sliport_status_err, ®_data)) {
+ (bf_get(lpfc_sliport_status_err, ®_data) &&
+ !bf_get(lpfc_sliport_status_rn, ®_data))) {
phba->work_status[0] =
readl(phba->sli4_hba.u.if_type2.
ERR1regaddr);
break;
case LPFC_SLI_INTF_IF_TYPE_2:
phba->sli4_hba.u.if_type2.ERR1regaddr =
- phba->sli4_hba.conf_regs_memmap_p + LPFC_SLIPORT_ERR_1;
+ phba->sli4_hba.conf_regs_memmap_p +
+ LPFC_CTL_PORT_ER1_OFFSET;
phba->sli4_hba.u.if_type2.ERR2regaddr =
- phba->sli4_hba.conf_regs_memmap_p + LPFC_SLIPORT_ERR_2;
+ phba->sli4_hba.conf_regs_memmap_p +
+ LPFC_CTL_PORT_ER2_OFFSET;
phba->sli4_hba.u.if_type2.CTRLregaddr =
- phba->sli4_hba.conf_regs_memmap_p + LPFC_SLIPORT_CNTRL;
+ phba->sli4_hba.conf_regs_memmap_p +
+ LPFC_CTL_PORT_CTL_OFFSET;
phba->sli4_hba.u.if_type2.STATUSregaddr =
- phba->sli4_hba.conf_regs_memmap_p + LPFC_SLIPORT_STATUS;
+ phba->sli4_hba.conf_regs_memmap_p +
+ LPFC_CTL_PORT_STA_OFFSET;
phba->sli4_hba.SLIINTFregaddr =
phba->sli4_hba.conf_regs_memmap_p + LPFC_SLI_INTF;
phba->sli4_hba.PSMPHRregaddr =
- phba->sli4_hba.conf_regs_memmap_p + LPFC_SLIPORT_IF2_SMPHR;
+ phba->sli4_hba.conf_regs_memmap_p +
+ LPFC_CTL_PORT_SEM_OFFSET;
phba->sli4_hba.RQDBregaddr =
phba->sli4_hba.conf_regs_memmap_p + LPFC_RQ_DOORBELL;
phba->sli4_hba.WQDBregaddr =
{
LPFC_MBOXQ_t *pmb;
struct lpfc_mbx_read_config *rd_config;
- uint32_t rc = 0;
+ union lpfc_sli4_cfg_shdr *shdr;
+ uint32_t shdr_status, shdr_add_status;
+ struct lpfc_mbx_get_func_cfg *get_func_cfg;
+ struct lpfc_rsrc_desc_fcfcoe *desc;
+ uint32_t desc_count;
+ int length, i, rc = 0;
pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!pmb) {
rc = -EIO;
} else {
rd_config = &pmb->u.mqe.un.rd_config;
+ phba->sli4_hba.extents_in_use =
+ bf_get(lpfc_mbx_rd_conf_extnts_inuse, rd_config);
phba->sli4_hba.max_cfg_param.max_xri =
bf_get(lpfc_mbx_rd_conf_xri_count, rd_config);
phba->sli4_hba.max_cfg_param.xri_base =
bf_get(lpfc_mbx_rd_conf_vfi_base, rd_config);
phba->sli4_hba.max_cfg_param.max_fcfi =
bf_get(lpfc_mbx_rd_conf_fcfi_count, rd_config);
- phba->sli4_hba.max_cfg_param.fcfi_base =
- bf_get(lpfc_mbx_rd_conf_fcfi_base, rd_config);
phba->sli4_hba.max_cfg_param.max_eq =
bf_get(lpfc_mbx_rd_conf_eq_count, rd_config);
phba->sli4_hba.max_cfg_param.max_rq =
(phba->sli4_hba.max_cfg_param.max_vpi - 1) : 0;
phba->max_vports = phba->max_vpi;
lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
- "2003 cfg params XRI(B:%d M:%d), "
+ "2003 cfg params Extents? %d "
+ "XRI(B:%d M:%d), "
"VPI(B:%d M:%d) "
"VFI(B:%d M:%d) "
"RPI(B:%d M:%d) "
- "FCFI(B:%d M:%d)\n",
+ "FCFI(Count:%d)\n",
+ phba->sli4_hba.extents_in_use,
phba->sli4_hba.max_cfg_param.xri_base,
phba->sli4_hba.max_cfg_param.max_xri,
phba->sli4_hba.max_cfg_param.vpi_base,
phba->sli4_hba.max_cfg_param.max_vfi,
phba->sli4_hba.max_cfg_param.rpi_base,
phba->sli4_hba.max_cfg_param.max_rpi,
- phba->sli4_hba.max_cfg_param.fcfi_base,
phba->sli4_hba.max_cfg_param.max_fcfi);
}
- mempool_free(pmb, phba->mbox_mem_pool);
+
+ if (rc)
+ goto read_cfg_out;
/* Reset the DFT_HBA_Q_DEPTH to the max xri */
if (phba->cfg_hba_queue_depth >
phba->cfg_hba_queue_depth =
phba->sli4_hba.max_cfg_param.max_xri -
lpfc_sli4_get_els_iocb_cnt(phba);
+
+ if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
+ LPFC_SLI_INTF_IF_TYPE_2)
+ goto read_cfg_out;
+
+ /* get the pf# and vf# for SLI4 if_type 2 port */
+ length = (sizeof(struct lpfc_mbx_get_func_cfg) -
+ sizeof(struct lpfc_sli4_cfg_mhdr));
+ lpfc_sli4_config(phba, pmb, LPFC_MBOX_SUBSYSTEM_COMMON,
+ LPFC_MBOX_OPCODE_GET_FUNCTION_CONFIG,
+ length, LPFC_SLI4_MBX_EMBED);
+
+ rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
+ shdr = (union lpfc_sli4_cfg_shdr *)
+ &pmb->u.mqe.un.sli4_config.header.cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+ if (rc || shdr_status || shdr_add_status) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "3026 Mailbox failed , mbxCmd x%x "
+ "GET_FUNCTION_CONFIG, mbxStatus x%x\n",
+ bf_get(lpfc_mqe_command, &pmb->u.mqe),
+ bf_get(lpfc_mqe_status, &pmb->u.mqe));
+ rc = -EIO;
+ goto read_cfg_out;
+ }
+
+ /* search for fc_fcoe resrouce descriptor */
+ get_func_cfg = &pmb->u.mqe.un.get_func_cfg;
+ desc_count = get_func_cfg->func_cfg.rsrc_desc_count;
+
+ for (i = 0; i < LPFC_RSRC_DESC_MAX_NUM; i++) {
+ desc = (struct lpfc_rsrc_desc_fcfcoe *)
+ &get_func_cfg->func_cfg.desc[i];
+ if (LPFC_RSRC_DESC_TYPE_FCFCOE ==
+ bf_get(lpfc_rsrc_desc_pcie_type, desc)) {
+ phba->sli4_hba.iov.pf_number =
+ bf_get(lpfc_rsrc_desc_fcfcoe_pfnum, desc);
+ phba->sli4_hba.iov.vf_number =
+ bf_get(lpfc_rsrc_desc_fcfcoe_vfnum, desc);
+ break;
+ }
+ }
+
+ if (i < LPFC_RSRC_DESC_MAX_NUM)
+ lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+ "3027 GET_FUNCTION_CONFIG: pf_number:%d, "
+ "vf_number:%d\n", phba->sli4_hba.iov.pf_number,
+ phba->sli4_hba.iov.vf_number);
+ else {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "3028 GET_FUNCTION_CONFIG: failed to find "
+ "Resrouce Descriptor:x%x\n",
+ LPFC_RSRC_DESC_TYPE_FCFCOE);
+ rc = -EIO;
+ }
+
+read_cfg_out:
+ mempool_free(pmb, phba->mbox_mem_pool);
return rc;
}
phba->sli4_hba.mbx_cq = NULL;
/* Release FCP response complete queue */
- for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++)
+ fcp_qidx = 0;
+ do
lpfc_sli4_queue_free(phba->sli4_hba.fcp_cq[fcp_qidx]);
+ while (++fcp_qidx < phba->cfg_fcp_eq_count);
kfree(phba->sli4_hba.fcp_cq);
phba->sli4_hba.fcp_cq = NULL;
phba->sli4_hba.sp_eq->queue_id);
/* Set up fast-path FCP Response Complete Queue */
- for (fcp_cqidx = 0; fcp_cqidx < phba->cfg_fcp_eq_count; fcp_cqidx++) {
+ fcp_cqidx = 0;
+ do {
if (!phba->sli4_hba.fcp_cq[fcp_cqidx]) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0526 Fast-path FCP CQ (%d) not "
"allocated\n", fcp_cqidx);
goto out_destroy_fcp_cq;
}
- rc = lpfc_cq_create(phba, phba->sli4_hba.fcp_cq[fcp_cqidx],
- phba->sli4_hba.fp_eq[fcp_cqidx],
- LPFC_WCQ, LPFC_FCP);
+ if (phba->cfg_fcp_eq_count)
+ rc = lpfc_cq_create(phba,
+ phba->sli4_hba.fcp_cq[fcp_cqidx],
+ phba->sli4_hba.fp_eq[fcp_cqidx],
+ LPFC_WCQ, LPFC_FCP);
+ else
+ rc = lpfc_cq_create(phba,
+ phba->sli4_hba.fcp_cq[fcp_cqidx],
+ phba->sli4_hba.sp_eq,
+ LPFC_WCQ, LPFC_FCP);
if (rc) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0527 Failed setup of fast-path FCP "
}
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"2588 FCP CQ setup: cq[%d]-id=%d, "
- "parent eq[%d]-id=%d\n",
+ "parent %seq[%d]-id=%d\n",
fcp_cqidx,
phba->sli4_hba.fcp_cq[fcp_cqidx]->queue_id,
+ (phba->cfg_fcp_eq_count) ? "" : "sp_",
fcp_cqidx,
- phba->sli4_hba.fp_eq[fcp_cqidx]->queue_id);
- }
+ (phba->cfg_fcp_eq_count) ?
+ phba->sli4_hba.fp_eq[fcp_cqidx]->queue_id :
+ phba->sli4_hba.sp_eq->queue_id);
+ } while (++fcp_cqidx < phba->cfg_fcp_eq_count);
/*
* Set up all the Work Queues (WQs)
fcp_cq_index,
phba->sli4_hba.fcp_cq[fcp_cq_index]->queue_id);
/* Round robin FCP Work Queue's Completion Queue assignment */
- fcp_cq_index = ((fcp_cq_index + 1) % phba->cfg_fcp_eq_count);
+ if (phba->cfg_fcp_eq_count)
+ fcp_cq_index = ((fcp_cq_index + 1) %
+ phba->cfg_fcp_eq_count);
}
/*
if (rdy_chk < 1000)
break;
}
+ /* delay driver action following IF_TYPE_2 function reset */
+ msleep(100);
break;
case LPFC_SLI_INTF_IF_TYPE_1:
default:
/*
* Assign MSI-X vectors to interrupt handlers
*/
-
- /* The first vector must associated to slow-path handler for MQ */
- rc = request_irq(phba->sli4_hba.msix_entries[0].vector,
- &lpfc_sli4_sp_intr_handler, IRQF_SHARED,
- LPFC_SP_DRIVER_HANDLER_NAME, phba);
+ if (vectors > 1)
+ rc = request_irq(phba->sli4_hba.msix_entries[0].vector,
+ &lpfc_sli4_sp_intr_handler, IRQF_SHARED,
+ LPFC_SP_DRIVER_HANDLER_NAME, phba);
+ else
+ /* All Interrupts need to be handled by one EQ */
+ rc = request_irq(phba->sli4_hba.msix_entries[0].vector,
+ &lpfc_sli4_intr_handler, IRQF_SHARED,
+ LPFC_DRIVER_NAME, phba);
if (rc) {
lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
"0485 MSI-X slow-path request_irq failed "
{
int wait_cnt = 0;
LPFC_MBOXQ_t *mboxq;
+ struct pci_dev *pdev = phba->pcidev;
lpfc_stop_hba_timers(phba);
phba->sli4_hba.intr_enable = 0;
/* Disable PCI subsystem interrupt */
lpfc_sli4_disable_intr(phba);
+ /* Disable SR-IOV if enabled */
+ if (phba->cfg_sriov_nr_virtfn)
+ pci_disable_sriov(pdev);
+
/* Stop kthread signal shall trigger work_done one more time */
kthread_stop(phba->worker_thread);
sli4_params->hdr_pp_align = bf_get(hdr_pp_align, &mqe->un.sli4_params);
sli4_params->sgl_pages_max = bf_get(sgl_pages, &mqe->un.sli4_params);
sli4_params->sgl_pp_align = bf_get(sgl_pp_align, &mqe->un.sli4_params);
+
+ /* Make sure that sge_supp_len can be handled by the driver */
+ if (sli4_params->sge_supp_len > LPFC_MAX_SGE_SIZE)
+ sli4_params->sge_supp_len = LPFC_MAX_SGE_SIZE;
+
return rc;
}
int length;
struct lpfc_sli4_parameters *mbx_sli4_parameters;
+ /*
+ * By default, the driver assumes the SLI4 port requires RPI
+ * header postings. The SLI4_PARAM response will correct this
+ * assumption.
+ */
+ phba->sli4_hba.rpi_hdrs_in_use = 1;
+
/* Read the port's SLI4 Config Parameters */
length = (sizeof(struct lpfc_mbx_get_sli4_parameters) -
sizeof(struct lpfc_sli4_cfg_mhdr));
mbx_sli4_parameters);
sli4_params->sgl_pp_align = bf_get(cfg_sgl_pp_align,
mbx_sli4_parameters);
+ phba->sli4_hba.extents_in_use = bf_get(cfg_ext, mbx_sli4_parameters);
+ phba->sli4_hba.rpi_hdrs_in_use = bf_get(cfg_hdrr, mbx_sli4_parameters);
+
+ /* Make sure that sge_supp_len can be handled by the driver */
+ if (sli4_params->sge_supp_len > LPFC_MAX_SGE_SIZE)
+ sli4_params->sge_supp_len = LPFC_MAX_SGE_SIZE;
+
return 0;
}
lpfc_debugfs_terminate(vport);
+ /* Disable SR-IOV if enabled */
+ if (phba->cfg_sriov_nr_virtfn)
+ pci_disable_sriov(pdev);
+
/* Disable interrupt */
lpfc_sli_disable_intr(phba);
return 0;
}
+/**
+ * lpfc_write_firmware - attempt to write a firmware image to the port
+ * @phba: pointer to lpfc hba data structure.
+ * @fw: pointer to firmware image returned from request_firmware.
+ *
+ * returns the number of bytes written if write is successful.
+ * returns a negative error value if there were errors.
+ * returns 0 if firmware matches currently active firmware on port.
+ **/
+int
+lpfc_write_firmware(struct lpfc_hba *phba, const struct firmware *fw)
+{
+ char fwrev[32];
+ struct lpfc_grp_hdr *image = (struct lpfc_grp_hdr *)fw->data;
+ struct list_head dma_buffer_list;
+ int i, rc = 0;
+ struct lpfc_dmabuf *dmabuf, *next;
+ uint32_t offset = 0, temp_offset = 0;
+
+ INIT_LIST_HEAD(&dma_buffer_list);
+ if ((image->magic_number != LPFC_GROUP_OJECT_MAGIC_NUM) ||
+ (bf_get(lpfc_grp_hdr_file_type, image) != LPFC_FILE_TYPE_GROUP) ||
+ (bf_get(lpfc_grp_hdr_id, image) != LPFC_FILE_ID_GROUP) ||
+ (image->size != fw->size)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "3022 Invalid FW image found. "
+ "Magic:%d Type:%x ID:%x\n",
+ image->magic_number,
+ bf_get(lpfc_grp_hdr_file_type, image),
+ bf_get(lpfc_grp_hdr_id, image));
+ return -EINVAL;
+ }
+ lpfc_decode_firmware_rev(phba, fwrev, 1);
+ if (strncmp(fwrev, image->revision, strnlen(image->revision, 16))) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "3023 Updating Firmware. Current Version:%s "
+ "New Version:%s\n",
+ fwrev, image->revision);
+ for (i = 0; i < LPFC_MBX_WR_CONFIG_MAX_BDE; i++) {
+ dmabuf = kzalloc(sizeof(struct lpfc_dmabuf),
+ GFP_KERNEL);
+ if (!dmabuf) {
+ rc = -ENOMEM;
+ goto out;
+ }
+ dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev,
+ SLI4_PAGE_SIZE,
+ &dmabuf->phys,
+ GFP_KERNEL);
+ if (!dmabuf->virt) {
+ kfree(dmabuf);
+ rc = -ENOMEM;
+ goto out;
+ }
+ list_add_tail(&dmabuf->list, &dma_buffer_list);
+ }
+ while (offset < fw->size) {
+ temp_offset = offset;
+ list_for_each_entry(dmabuf, &dma_buffer_list, list) {
+ if (offset + SLI4_PAGE_SIZE > fw->size) {
+ temp_offset += fw->size - offset;
+ memcpy(dmabuf->virt,
+ fw->data + temp_offset,
+ fw->size - offset);
+ break;
+ }
+ memcpy(dmabuf->virt, fw->data + temp_offset,
+ SLI4_PAGE_SIZE);
+ temp_offset += SLI4_PAGE_SIZE;
+ }
+ rc = lpfc_wr_object(phba, &dma_buffer_list,
+ (fw->size - offset), &offset);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "3024 Firmware update failed. "
+ "%d\n", rc);
+ goto out;
+ }
+ }
+ rc = offset;
+ }
+out:
+ list_for_each_entry_safe(dmabuf, next, &dma_buffer_list, list) {
+ list_del(&dmabuf->list);
+ dma_free_coherent(&phba->pcidev->dev, SLI4_PAGE_SIZE,
+ dmabuf->virt, dmabuf->phys);
+ kfree(dmabuf);
+ }
+ return rc;
+}
+
/**
* lpfc_pci_probe_one_s4 - PCI probe func to reg SLI-4 device to PCI subsys
* @pdev: pointer to PCI device
int error;
uint32_t cfg_mode, intr_mode;
int mcnt;
+ int adjusted_fcp_eq_count;
+ int fcp_qidx;
+ const struct firmware *fw;
+ uint8_t file_name[16];
/* Allocate memory for HBA structure */
phba = lpfc_hba_alloc(pdev);
error = -ENODEV;
goto out_free_sysfs_attr;
}
- /* Default to single FCP EQ for non-MSI-X */
+ /* Default to single EQ for non-MSI-X */
if (phba->intr_type != MSIX)
- phba->cfg_fcp_eq_count = 1;
- else if (phba->sli4_hba.msix_vec_nr < phba->cfg_fcp_eq_count)
- phba->cfg_fcp_eq_count = phba->sli4_hba.msix_vec_nr - 1;
+ adjusted_fcp_eq_count = 0;
+ else if (phba->sli4_hba.msix_vec_nr <
+ phba->cfg_fcp_eq_count + 1)
+ adjusted_fcp_eq_count = phba->sli4_hba.msix_vec_nr - 1;
+ else
+ adjusted_fcp_eq_count = phba->cfg_fcp_eq_count;
+ /* Free unused EQs */
+ for (fcp_qidx = adjusted_fcp_eq_count;
+ fcp_qidx < phba->cfg_fcp_eq_count;
+ fcp_qidx++) {
+ lpfc_sli4_queue_free(phba->sli4_hba.fp_eq[fcp_qidx]);
+ /* do not delete the first fcp_cq */
+ if (fcp_qidx)
+ lpfc_sli4_queue_free(
+ phba->sli4_hba.fcp_cq[fcp_qidx]);
+ }
+ phba->cfg_fcp_eq_count = adjusted_fcp_eq_count;
/* Set up SLI-4 HBA */
if (lpfc_sli4_hba_setup(phba)) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
/* Perform post initialization setup */
lpfc_post_init_setup(phba);
+ /* check for firmware upgrade or downgrade */
+ snprintf(file_name, 16, "%s.grp", phba->ModelName);
+ error = request_firmware(&fw, file_name, &phba->pcidev->dev);
+ if (!error) {
+ lpfc_write_firmware(phba, fw);
+ release_firmware(fw);
+ }
+
/* Check if there are static vports to be created. */
lpfc_create_static_vport(phba);
}
pci_restore_state(pdev);
+
+ /*
+ * As the new kernel behavior of pci_restore_state() API call clears
+ * device saved_state flag, need to save the restored state again.
+ */
+ pci_save_state(pdev);
+
if (pdev->is_busmaster)
pci_set_master(pdev);
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LANCER_FCOE,
PCI_ANY_ID, PCI_ANY_ID, },
+ {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LANCER_FC_VF,
+ PCI_ANY_ID, PCI_ANY_ID, },
+ {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LANCER_FCOE_VF,
+ PCI_ANY_ID, PCI_ANY_ID, },
{ 0 }
};
projects / firefly-linux-kernel-4.4.55.git / blobdiff