/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2014 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2015 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
void
lpfc_sli4_offline_eratt(struct lpfc_hba *phba)
{
+ spin_lock_irq(&phba->hbalock);
+ phba->link_state = LPFC_HBA_ERROR;
+ spin_unlock_irq(&phba->hbalock);
+
lpfc_offline_prep(phba, LPFC_MBX_NO_WAIT);
lpfc_offline(phba);
- lpfc_sli4_brdreset(phba);
lpfc_hba_down_post(phba);
- lpfc_sli4_post_status_check(phba);
lpfc_unblock_mgmt_io(phba);
- phba->link_state = LPFC_HBA_ERROR;
}
/**
uint32_t uerrlo_reg, uemasklo_reg;
uint32_t pci_rd_rc1, pci_rd_rc2;
bool en_rn_msg = true;
+ struct temp_event temp_event_data;
int rc;
/* If the pci channel is offline, ignore possible errors, since
*/
if (pci_channel_offline(phba->pcidev))
return;
- /* If resets are disabled then leave the HBA alone and return */
- if (!phba->cfg_enable_hba_reset)
- return;
if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf);
switch (if_type) {
return;
lpfc_sli4_offline_eratt(phba);
break;
+
case LPFC_SLI_INTF_IF_TYPE_2:
pci_rd_rc1 = lpfc_readl(
phba->sli4_hba.u.if_type2.STATUSregaddr,
reg_err1 = readl(phba->sli4_hba.u.if_type2.ERR1regaddr);
reg_err2 = readl(phba->sli4_hba.u.if_type2.ERR2regaddr);
if (bf_get(lpfc_sliport_status_oti, &portstat_reg)) {
- /* TODO: Register for Overtemp async events. */
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2889 Port Overtemperature event, "
- "taking port offline\n");
+ "taking port offline Data: x%x x%x\n",
+ reg_err1, reg_err2);
+
+ temp_event_data.event_type = FC_REG_TEMPERATURE_EVENT;
+ temp_event_data.event_code = LPFC_CRIT_TEMP;
+ temp_event_data.data = 0xFFFFFFFF;
+
+ shost = lpfc_shost_from_vport(phba->pport);
+ fc_host_post_vendor_event(shost, fc_get_event_number(),
+ sizeof(temp_event_data),
+ (char *)&temp_event_data,
+ SCSI_NL_VID_TYPE_PCI
+ | PCI_VENDOR_ID_EMULEX);
+
spin_lock_irq(&phba->hbalock);
phba->over_temp_state = HBA_OVER_TEMP;
spin_unlock_irq(&phba->hbalock);
lpfc_sli4_offline_eratt(phba);
- break;
+ return;
}
if (reg_err1 == SLIPORT_ERR1_REG_ERR_CODE_2 &&
reg_err2 == SLIPORT_ERR2_REG_FW_RESTART) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"3145 Port Down: Provisioning\n");
+ /* If resets are disabled then leave the HBA alone and return */
+ if (!phba->cfg_enable_hba_reset)
+ return;
+
/* Check port status register for function reset */
rc = lpfc_sli4_port_sta_fn_reset(phba, LPFC_MBX_NO_WAIT,
en_rn_msg);
list_for_each_entry_safe(ndlp, next_ndlp,
&vports[i]->fc_nodes,
nlp_listp) {
- if (NLP_CHK_NODE_ACT(ndlp))
+ if (NLP_CHK_NODE_ACT(ndlp)) {
ndlp->nlp_rpi =
lpfc_sli4_alloc_rpi(phba);
+ lpfc_printf_vlog(ndlp->vport, KERN_INFO,
+ LOG_NODE,
+ "0009 rpi:%x DID:%x "
+ "flg:%x map:%x %p\n",
+ ndlp->nlp_rpi,
+ ndlp->nlp_DID,
+ ndlp->nlp_flag,
+ ndlp->nlp_usg_map,
+ ndlp);
+ }
}
}
}
* RPI. Get a new RPI when the adapter port
* comes back online.
*/
- if (phba->sli_rev == LPFC_SLI_REV4)
+ if (phba->sli_rev == LPFC_SLI_REV4) {
+ lpfc_printf_vlog(ndlp->vport,
+ KERN_INFO, LOG_NODE,
+ "0011 lpfc_offline: "
+ "ndlp:x%p did %x "
+ "usgmap:x%x rpi:%x\n",
+ ndlp, ndlp->nlp_DID,
+ ndlp->nlp_usg_map,
+ ndlp->nlp_rpi);
+
lpfc_sli4_free_rpi(phba, ndlp->nlp_rpi);
+ }
lpfc_unreg_rpi(vports[i], ndlp);
}
}
struct Scsi_Host *shost;
int error = 0;
- if (dev != &phba->pcidev->dev)
+ if (dev != &phba->pcidev->dev) {
shost = scsi_host_alloc(&lpfc_vport_template,
sizeof(struct lpfc_vport));
- else
- shost = scsi_host_alloc(&lpfc_template,
+ } else {
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ shost = scsi_host_alloc(&lpfc_template,
sizeof(struct lpfc_vport));
+ else
+ shost = scsi_host_alloc(&lpfc_template_s3,
+ sizeof(struct lpfc_vport));
+ }
if (!shost)
goto out;
case LPFC_ASYNC_LINK_SPEED_10GBPS:
link_speed = LPFC_LINK_SPEED_10GHZ;
break;
+ case LPFC_ASYNC_LINK_SPEED_20GBPS:
+ case LPFC_ASYNC_LINK_SPEED_25GBPS:
+ case LPFC_ASYNC_LINK_SPEED_40GBPS:
+ link_speed = LPFC_LINK_SPEED_UNKNOWN;
+ break;
default:
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0483 Invalid link-attention link speed: x%x\n",
switch (evt_code) {
case LPFC_TRAILER_CODE_LINK:
switch (speed_code) {
- case LPFC_EVT_CODE_LINK_NO_LINK:
+ case LPFC_ASYNC_LINK_SPEED_ZERO:
port_speed = 0;
break;
- case LPFC_EVT_CODE_LINK_10_MBIT:
+ case LPFC_ASYNC_LINK_SPEED_10MBPS:
port_speed = 10;
break;
- case LPFC_EVT_CODE_LINK_100_MBIT:
+ case LPFC_ASYNC_LINK_SPEED_100MBPS:
port_speed = 100;
break;
- case LPFC_EVT_CODE_LINK_1_GBIT:
+ case LPFC_ASYNC_LINK_SPEED_1GBPS:
port_speed = 1000;
break;
- case LPFC_EVT_CODE_LINK_10_GBIT:
+ case LPFC_ASYNC_LINK_SPEED_10GBPS:
port_speed = 10000;
break;
+ case LPFC_ASYNC_LINK_SPEED_20GBPS:
+ port_speed = 20000;
+ break;
+ case LPFC_ASYNC_LINK_SPEED_25GBPS:
+ port_speed = 25000;
+ break;
+ case LPFC_ASYNC_LINK_SPEED_40GBPS:
+ port_speed = 40000;
+ break;
default:
port_speed = 0;
}
break;
case LPFC_TRAILER_CODE_FC:
switch (speed_code) {
- case LPFC_EVT_CODE_FC_NO_LINK:
+ case LPFC_FC_LA_SPEED_UNKNOWN:
port_speed = 0;
break;
- case LPFC_EVT_CODE_FC_1_GBAUD:
+ case LPFC_FC_LA_SPEED_1G:
port_speed = 1000;
break;
- case LPFC_EVT_CODE_FC_2_GBAUD:
+ case LPFC_FC_LA_SPEED_2G:
port_speed = 2000;
break;
- case LPFC_EVT_CODE_FC_4_GBAUD:
+ case LPFC_FC_LA_SPEED_4G:
port_speed = 4000;
break;
- case LPFC_EVT_CODE_FC_8_GBAUD:
+ case LPFC_FC_LA_SPEED_8G:
port_speed = 8000;
break;
- case LPFC_EVT_CODE_FC_10_GBAUD:
+ case LPFC_FC_LA_SPEED_10G:
port_speed = 10000;
break;
- case LPFC_EVT_CODE_FC_16_GBAUD:
+ case LPFC_FC_LA_SPEED_16G:
port_speed = 16000;
break;
default:
char port_name;
char message[128];
uint8_t status;
+ uint8_t evt_type;
+ struct temp_event temp_event_data;
struct lpfc_acqe_misconfigured_event *misconfigured;
+ struct Scsi_Host *shost;
+
+ evt_type = bf_get(lpfc_trailer_type, acqe_sli);
- /* special case misconfigured event as it contains data for all ports */
- if ((bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
- LPFC_SLI_INTF_IF_TYPE_2) ||
- (bf_get(lpfc_trailer_type, acqe_sli) !=
- LPFC_SLI_EVENT_TYPE_MISCONFIGURED)) {
+ /* Special case Lancer */
+ if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
+ LPFC_SLI_INTF_IF_TYPE_2) {
lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
"2901 Async SLI event - Event Data1:x%08x Event Data2:"
"x%08x SLI Event Type:%d\n",
acqe_sli->event_data1, acqe_sli->event_data2,
- bf_get(lpfc_trailer_type, acqe_sli));
+ evt_type);
return;
}
if (port_name == 0x00)
port_name = '?'; /* get port name is empty */
- misconfigured = (struct lpfc_acqe_misconfigured_event *)
+ switch (evt_type) {
+ case LPFC_SLI_EVENT_TYPE_OVER_TEMP:
+ temp_event_data.event_type = FC_REG_TEMPERATURE_EVENT;
+ temp_event_data.event_code = LPFC_THRESHOLD_TEMP;
+ temp_event_data.data = (uint32_t)acqe_sli->event_data1;
+
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+ "3190 Over Temperature:%d Celsius- Port Name %c\n",
+ acqe_sli->event_data1, port_name);
+
+ shost = lpfc_shost_from_vport(phba->pport);
+ fc_host_post_vendor_event(shost, fc_get_event_number(),
+ sizeof(temp_event_data),
+ (char *)&temp_event_data,
+ SCSI_NL_VID_TYPE_PCI
+ | PCI_VENDOR_ID_EMULEX);
+ break;
+ case LPFC_SLI_EVENT_TYPE_NORM_TEMP:
+ temp_event_data.event_type = FC_REG_TEMPERATURE_EVENT;
+ temp_event_data.event_code = LPFC_NORMAL_TEMP;
+ temp_event_data.data = (uint32_t)acqe_sli->event_data1;
+
+ lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+ "3191 Normal Temperature:%d Celsius - Port Name %c\n",
+ acqe_sli->event_data1, port_name);
+
+ shost = lpfc_shost_from_vport(phba->pport);
+ fc_host_post_vendor_event(shost, fc_get_event_number(),
+ sizeof(temp_event_data),
+ (char *)&temp_event_data,
+ SCSI_NL_VID_TYPE_PCI
+ | PCI_VENDOR_ID_EMULEX);
+ break;
+ case LPFC_SLI_EVENT_TYPE_MISCONFIGURED:
+ misconfigured = (struct lpfc_acqe_misconfigured_event *)
&acqe_sli->event_data1;
- /* fetch the status for this port */
- switch (phba->sli4_hba.lnk_info.lnk_no) {
- case LPFC_LINK_NUMBER_0:
- status = bf_get(lpfc_sli_misconfigured_port0,
+ /* fetch the status for this port */
+ switch (phba->sli4_hba.lnk_info.lnk_no) {
+ case LPFC_LINK_NUMBER_0:
+ status = bf_get(lpfc_sli_misconfigured_port0,
&misconfigured->theEvent);
- break;
- case LPFC_LINK_NUMBER_1:
- status = bf_get(lpfc_sli_misconfigured_port1,
+ break;
+ case LPFC_LINK_NUMBER_1:
+ status = bf_get(lpfc_sli_misconfigured_port1,
&misconfigured->theEvent);
- break;
- case LPFC_LINK_NUMBER_2:
- status = bf_get(lpfc_sli_misconfigured_port2,
+ break;
+ case LPFC_LINK_NUMBER_2:
+ status = bf_get(lpfc_sli_misconfigured_port2,
&misconfigured->theEvent);
- break;
- case LPFC_LINK_NUMBER_3:
- status = bf_get(lpfc_sli_misconfigured_port3,
+ break;
+ case LPFC_LINK_NUMBER_3:
+ status = bf_get(lpfc_sli_misconfigured_port3,
&misconfigured->theEvent);
- break;
- default:
- status = ~LPFC_SLI_EVENT_STATUS_VALID;
- break;
- }
+ break;
+ default:
+ status = ~LPFC_SLI_EVENT_STATUS_VALID;
+ break;
+ }
- switch (status) {
- case LPFC_SLI_EVENT_STATUS_VALID:
- return; /* no message if the sfp is okay */
- case LPFC_SLI_EVENT_STATUS_NOT_PRESENT:
- sprintf(message, "Optics faulted/incorrectly installed/not " \
- "installed - Reseat optics, if issue not "
- "resolved, replace.");
- break;
- case LPFC_SLI_EVENT_STATUS_WRONG_TYPE:
- sprintf(message,
- "Optics of two types installed - Remove one optic or " \
- "install matching pair of optics.");
- break;
- case LPFC_SLI_EVENT_STATUS_UNSUPPORTED:
- sprintf(message, "Incompatible optics - Replace with " \
+ switch (status) {
+ case LPFC_SLI_EVENT_STATUS_VALID:
+ return; /* no message if the sfp is okay */
+ case LPFC_SLI_EVENT_STATUS_NOT_PRESENT:
+ sprintf(message, "Optics faulted/incorrectly "
+ "installed/not installed - Reseat optics, "
+ "if issue not resolved, replace.");
+ break;
+ case LPFC_SLI_EVENT_STATUS_WRONG_TYPE:
+ sprintf(message,
+ "Optics of two types installed - Remove one "
+ "optic or install matching pair of optics.");
+ break;
+ case LPFC_SLI_EVENT_STATUS_UNSUPPORTED:
+ sprintf(message, "Incompatible optics - Replace with "
"compatible optics for card to function.");
+ break;
+ default:
+ /* firmware is reporting a status we don't know about */
+ sprintf(message, "Unknown event status x%02x", status);
+ break;
+ }
+
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "3176 Misconfigured Physical Port - "
+ "Port Name %c %s\n", port_name, message);
+ break;
+ case LPFC_SLI_EVENT_TYPE_REMOTE_DPORT:
+ lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+ "3192 Remote DPort Test Initiated - "
+ "Event Data1:x%08x Event Data2: x%08x\n",
+ acqe_sli->event_data1, acqe_sli->event_data2);
break;
default:
- /* firmware is reporting a status we don't know about */
- sprintf(message, "Unknown event status x%02x", status);
+ lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+ "3193 Async SLI event - Event Data1:x%08x Event Data2:"
+ "x%08x SLI Event Type:%d\n",
+ acqe_sli->event_data1, acqe_sli->event_data2,
+ evt_type);
break;
}
-
- lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
- "3176 Misconfigured Physical Port - "
- "Port Name %c %s\n", port_name, message);
}
/**
rc = lpfc_pci_function_reset(phba);
if (unlikely(rc))
return -ENODEV;
+ phba->temp_sensor_support = 1;
}
/* Create the bootstrap mailbox command */
goto out_destroy_els_rq;
}
}
+
+ /*
+ * Configure EQ delay multipier for interrupt coalescing using
+ * MODIFY_EQ_DELAY for all EQs created, LPFC_MAX_EQ_DELAY at a time.
+ */
+ for (fcp_eqidx = 0; fcp_eqidx < phba->cfg_fcp_io_channel;
+ fcp_eqidx += LPFC_MAX_EQ_DELAY)
+ lpfc_modify_fcp_eq_delay(phba, fcp_eqidx);
return 0;
out_destroy_els_rq:
* up to 30 seconds. If the port doesn't respond, treat
* it as an error.
*/
- for (rdy_chk = 0; rdy_chk < 3000; rdy_chk++) {
+ for (rdy_chk = 0; rdy_chk < 1500; rdy_chk++) {
if (lpfc_readl(phba->sli4_hba.u.if_type2.
STATUSregaddr, ®_data.word0)) {
rc = -ENODEV;
projects / firefly-linux-kernel-4.4.55.git / blobdiff