/*
* QLogic iSCSI HBA Driver
- * Copyright (c) 2003-2010 QLogic Corporation
+ * Copyright (c) 2003-2012 QLogic Corporation
*
* See LICENSE.qla4xxx for copyright and licensing details.
*/
#include "ql4_glbl.h"
#include "ql4_dbg.h"
#include "ql4_inline.h"
+#include "ql4_83xx.h"
/*
* Driver version
static int qla4xxx_slave_alloc(struct scsi_device *device);
static int qla4xxx_slave_configure(struct scsi_device *device);
static void qla4xxx_slave_destroy(struct scsi_device *sdev);
-static umode_t ql4_attr_is_visible(int param_type, int param);
+static umode_t qla4_attr_is_visible(int param_type, int param);
static int qla4xxx_host_reset(struct Scsi_Host *shost, int reset_type);
static int qla4xxx_change_queue_depth(struct scsi_device *sdev, int qdepth,
int reason);
CAP_DATA_PATH_OFFLOAD | CAP_HDRDGST |
CAP_DATADGST | CAP_LOGIN_OFFLOAD |
CAP_MULTI_R2T,
- .attr_is_visible = ql4_attr_is_visible,
+ .attr_is_visible = qla4_attr_is_visible,
.create_session = qla4xxx_session_create,
.destroy_session = qla4xxx_session_destroy,
.start_conn = qla4xxx_conn_start,
return rval;
}
-static umode_t ql4_attr_is_visible(int param_type, int param)
+static umode_t qla4_attr_is_visible(int param_type, int param)
{
switch (param_type) {
case ISCSI_HOST_PARAM:
if (ha->nx_pcibase)
iounmap(
(struct device_reg_82xx __iomem *)ha->nx_pcibase);
- } else if (ha->reg)
+ } else if (is_qla8032(ha)) {
+ if (ha->nx_pcibase)
+ iounmap(
+ (struct device_reg_83xx __iomem *)ha->nx_pcibase);
+ } else if (ha->reg) {
iounmap(ha->reg);
+ }
+
+ if (ha->reset_tmplt.buff)
+ vfree(ha->reset_tmplt.buff);
+
pci_release_regions(ha->pdev);
}
uint32_t temp, temp_state, temp_val;
int status = QLA_SUCCESS;
- temp = qla4_8xxx_rd_32(ha, CRB_TEMP_STATE);
+ temp = qla4_8xxx_rd_direct(ha, QLA8XXX_CRB_TEMP_STATE);
temp_state = qla82xx_get_temp_state(temp);
temp_val = qla82xx_get_temp_val(temp);
uint32_t fw_heartbeat_counter;
int status = QLA_SUCCESS;
- fw_heartbeat_counter = qla4_8xxx_rd_32(ha, QLA82XX_PEG_ALIVE_COUNTER);
+ fw_heartbeat_counter = qla4_8xxx_rd_direct(ha,
+ QLA8XXX_PEG_ALIVE_COUNTER);
/* If PEG_ALIVE_COUNTER is 0xffffffff, AER/EEH is in progress, ignore */
if (fw_heartbeat_counter == 0xffffffff) {
DEBUG2(printk(KERN_WARNING "scsi%ld: %s: Device in frozen "
/* FW not alive after 2 seconds */
if (ha->seconds_since_last_heartbeat == 2) {
ha->seconds_since_last_heartbeat = 0;
-
- ql4_printk(KERN_INFO, ha,
- "scsi(%ld): %s, Dumping hw/fw registers:\n "
- " PEG_HALT_STATUS1: 0x%x, PEG_HALT_STATUS2:"
- " 0x%x,\n PEG_NET_0_PC: 0x%x, PEG_NET_1_PC:"
- " 0x%x,\n PEG_NET_2_PC: 0x%x, PEG_NET_3_PC:"
- " 0x%x,\n PEG_NET_4_PC: 0x%x\n",
- ha->host_no, __func__,
- qla4_8xxx_rd_32(ha,
- QLA82XX_PEG_HALT_STATUS1),
- qla4_8xxx_rd_32(ha,
- QLA82XX_PEG_HALT_STATUS2),
- qla4_8xxx_rd_32(ha, QLA82XX_CRB_PEG_NET_0 +
- 0x3c),
- qla4_8xxx_rd_32(ha, QLA82XX_CRB_PEG_NET_1 +
- 0x3c),
- qla4_8xxx_rd_32(ha, QLA82XX_CRB_PEG_NET_2 +
- 0x3c),
- qla4_8xxx_rd_32(ha, QLA82XX_CRB_PEG_NET_3 +
- 0x3c),
- qla4_8xxx_rd_32(ha, QLA82XX_CRB_PEG_NET_4 +
- 0x3c));
+ qla4_8xxx_dump_peg_reg(ha);
status = QLA_ERROR;
}
} else
return status;
}
+static void qla4_8xxx_process_fw_error(struct scsi_qla_host *ha)
+{
+ uint32_t halt_status;
+ int halt_status_unrecoverable = 0;
+
+ halt_status = qla4_8xxx_rd_direct(ha, QLA8XXX_PEG_HALT_STATUS1);
+
+ if (is_qla8022(ha)) {
+ ql4_printk(KERN_INFO, ha, "%s: disabling pause transmit on port 0 & 1.\n",
+ __func__);
+ qla4_82xx_wr_32(ha, QLA82XX_CRB_NIU + 0x98,
+ CRB_NIU_XG_PAUSE_CTL_P0 |
+ CRB_NIU_XG_PAUSE_CTL_P1);
+
+ if (QLA82XX_FWERROR_CODE(halt_status) == 0x67)
+ ql4_printk(KERN_ERR, ha, "%s: Firmware aborted with error code 0x00006700. Device is being reset\n",
+ __func__);
+ if (halt_status & HALT_STATUS_UNRECOVERABLE)
+ halt_status_unrecoverable = 1;
+ } else if (is_qla8032(ha)) {
+ if (halt_status & QLA83XX_HALT_STATUS_FW_RESET)
+ ql4_printk(KERN_ERR, ha, "%s: Firmware error detected device is being reset\n",
+ __func__);
+ else if (halt_status & QLA83XX_HALT_STATUS_UNRECOVERABLE)
+ halt_status_unrecoverable = 1;
+ }
+
+ /*
+ * Since we cannot change dev_state in interrupt context,
+ * set appropriate DPC flag then wakeup DPC
+ */
+ if (halt_status_unrecoverable) {
+ set_bit(DPC_HA_UNRECOVERABLE, &ha->dpc_flags);
+ } else {
+ ql4_printk(KERN_INFO, ha, "%s: detect abort needed!\n",
+ __func__);
+ set_bit(DPC_RESET_HA, &ha->dpc_flags);
+ }
+ qla4xxx_mailbox_premature_completion(ha);
+ qla4xxx_wake_dpc(ha);
+}
+
/**
* qla4_8xxx_watchdog - Poll dev state
* @ha: Pointer to host adapter structure.
**/
void qla4_8xxx_watchdog(struct scsi_qla_host *ha)
{
- uint32_t dev_state, halt_status;
+ uint32_t dev_state;
/* don't poll if reset is going on */
if (!(test_bit(DPC_RESET_ACTIVE, &ha->dpc_flags) ||
test_bit(DPC_RESET_HA, &ha->dpc_flags) ||
test_bit(DPC_RETRY_RESET_HA, &ha->dpc_flags))) {
- dev_state = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DEV_STATE);
+ dev_state = qla4_8xxx_rd_direct(ha, QLA8XXX_CRB_DEV_STATE);
if (qla4_8xxx_check_temp(ha)) {
- ql4_printk(KERN_INFO, ha, "disabling pause"
- " transmit on port 0 & 1.\n");
- qla4_8xxx_wr_32(ha, QLA82XX_CRB_NIU + 0x98,
- CRB_NIU_XG_PAUSE_CTL_P0 |
- CRB_NIU_XG_PAUSE_CTL_P1);
+ if (is_qla8022(ha)) {
+ ql4_printk(KERN_INFO, ha, "disabling pause transmit on port 0 & 1.\n");
+ qla4_82xx_wr_32(ha, QLA82XX_CRB_NIU + 0x98,
+ CRB_NIU_XG_PAUSE_CTL_P0 |
+ CRB_NIU_XG_PAUSE_CTL_P1);
+ }
set_bit(DPC_HA_UNRECOVERABLE, &ha->dpc_flags);
qla4xxx_wake_dpc(ha);
- } else if (dev_state == QLA82XX_DEV_NEED_RESET &&
- !test_bit(DPC_RESET_HA, &ha->dpc_flags)) {
- if (!ql4xdontresethba) {
+ } else if (dev_state == QLA8XXX_DEV_NEED_RESET &&
+ !test_bit(DPC_RESET_HA, &ha->dpc_flags)) {
+ if (is_qla8032(ha) ||
+ (is_qla8022(ha) && !ql4xdontresethba)) {
ql4_printk(KERN_INFO, ha, "%s: HW State: "
"NEED RESET!\n", __func__);
set_bit(DPC_RESET_HA, &ha->dpc_flags);
qla4xxx_wake_dpc(ha);
}
- } else if (dev_state == QLA82XX_DEV_NEED_QUIESCENT &&
+ } else if (dev_state == QLA8XXX_DEV_NEED_QUIESCENT &&
!test_bit(DPC_HA_NEED_QUIESCENT, &ha->dpc_flags)) {
ql4_printk(KERN_INFO, ha, "%s: HW State: NEED QUIES!\n",
__func__);
qla4xxx_wake_dpc(ha);
} else {
/* Check firmware health */
- if (qla4_8xxx_check_fw_alive(ha)) {
- ql4_printk(KERN_INFO, ha, "disabling pause"
- " transmit on port 0 & 1.\n");
- qla4_8xxx_wr_32(ha, QLA82XX_CRB_NIU + 0x98,
- CRB_NIU_XG_PAUSE_CTL_P0 |
- CRB_NIU_XG_PAUSE_CTL_P1);
- halt_status = qla4_8xxx_rd_32(ha,
- QLA82XX_PEG_HALT_STATUS1);
-
- if (QLA82XX_FWERROR_CODE(halt_status) == 0x67)
- ql4_printk(KERN_ERR, ha, "%s:"
- " Firmware aborted with"
- " error code 0x00006700."
- " Device is being reset\n",
- __func__);
-
- /* Since we cannot change dev_state in interrupt
- * context, set appropriate DPC flag then wakeup
- * DPC */
- if (halt_status & HALT_STATUS_UNRECOVERABLE)
- set_bit(DPC_HA_UNRECOVERABLE,
- &ha->dpc_flags);
- else {
- ql4_printk(KERN_INFO, ha, "%s: detect "
- "abort needed!\n", __func__);
- set_bit(DPC_RESET_HA, &ha->dpc_flags);
- }
- qla4xxx_mailbox_premature_completion(ha);
- qla4xxx_wake_dpc(ha);
- }
+ if (qla4_8xxx_check_fw_alive(ha))
+ qla4_8xxx_process_fw_error(ha);
}
}
}
if (!pci_channel_offline(ha->pdev))
pci_read_config_word(ha->pdev, PCI_VENDOR_ID, &w);
- if (is_qla8022(ha)) {
+ if (is_qla80XX(ha))
qla4_8xxx_watchdog(ha);
- }
- if (!is_qla8022(ha)) {
+ if (is_qla40XX(ha)) {
/* Check for heartbeat interval. */
if (ha->firmware_options & FWOPT_HEARTBEAT_ENABLE &&
ha->heartbeat_interval != 0) {
goto recover_ha_init_adapter;
}
- /* For the ISP-82xx adapter, issue a stop_firmware if invoked
+ /* For the ISP-8xxx adapter, issue a stop_firmware if invoked
* from eh_host_reset or ioctl module */
- if (is_qla8022(ha) && !reset_chip &&
+ if (is_qla80XX(ha) && !reset_chip &&
test_bit(DPC_RESET_HA_FW_CONTEXT, &ha->dpc_flags)) {
DEBUG2(ql4_printk(KERN_INFO, ha,
}
/* Issue full chip reset if recovering from a catastrophic error,
- * or if stop_firmware fails for ISP-82xx.
+ * or if stop_firmware fails for ISP-8xxx.
* This is the default case for ISP-4xxx */
- if (!is_qla8022(ha) || reset_chip) {
- if (!is_qla8022(ha))
+ if (is_qla40XX(ha) || reset_chip) {
+ if (is_qla40XX(ha))
goto chip_reset;
- /* Check if 82XX firmware is alive or not
+ /* Check if 8XXX firmware is alive or not
* We may have arrived here from NEED_RESET
* detection only */
if (test_bit(AF_FW_RECOVERY, &ha->flags))
set_current_state(TASK_UNINTERRUPTIBLE);
schedule_timeout(HZ);
}
-
+chip_reset:
if (!test_bit(AF_FW_RECOVERY, &ha->flags))
qla4xxx_cmd_wait(ha);
-chip_reset:
+
qla4xxx_process_aen(ha, FLUSH_DDB_CHANGED_AENS);
qla4xxx_abort_active_cmds(ha, DID_RESET << 16);
DEBUG2(ql4_printk(KERN_INFO, ha,
/* For ISP-4xxx, force function 1 to always initialize
* before function 3 to prevent both funcions from
* stepping on top of the other */
- if (!is_qla8022(ha) && (ha->mac_index == 3))
+ if (is_qla40XX(ha) && (ha->mac_index == 3))
ssleep(6);
/* NOTE: AF_ONLINE flag set upon successful completion of
* Since we don't want to block the DPC for too long
* with multiple resets in the same thread,
* utilize DPC to retry */
- if (is_qla8022(ha)) {
- qla4_8xxx_idc_lock(ha);
- dev_state = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DEV_STATE);
- qla4_8xxx_idc_unlock(ha);
- if (dev_state == QLA82XX_DEV_FAILED) {
+ if (is_qla80XX(ha)) {
+ ha->isp_ops->idc_lock(ha);
+ dev_state = qla4_8xxx_rd_direct(ha,
+ QLA8XXX_CRB_DEV_STATE);
+ ha->isp_ops->idc_unlock(ha);
+ if (dev_state == QLA8XXX_DEV_FAILED) {
ql4_printk(KERN_INFO, ha, "%s: don't retry "
"recover adapter. H/W is in Failed "
"state\n", __func__);
/* post events to application */
qla4xxx_do_work(ha);
- if (is_qla8022(ha)) {
+ if (is_qla80XX(ha)) {
if (test_bit(DPC_HA_UNRECOVERABLE, &ha->dpc_flags)) {
- qla4_8xxx_idc_lock(ha);
- qla4_8xxx_wr_32(ha, QLA82XX_CRB_DEV_STATE,
- QLA82XX_DEV_FAILED);
- qla4_8xxx_idc_unlock(ha);
+ ha->isp_ops->idc_lock(ha);
+ qla4_8xxx_wr_direct(ha, QLA8XXX_CRB_DEV_STATE,
+ QLA8XXX_DEV_FAILED);
+ ha->isp_ops->idc_unlock(ha);
ql4_printk(KERN_INFO, ha, "HW State: FAILED\n");
qla4_8xxx_device_state_handler(ha);
}
(test_bit(DPC_RESET_HA, &ha->dpc_flags) ||
test_bit(DPC_RESET_HA_INTR, &ha->dpc_flags) ||
test_bit(DPC_RESET_HA_FW_CONTEXT, &ha->dpc_flags))) {
- if (ql4xdontresethba) {
+ if ((is_qla8022(ha) && ql4xdontresethba) ||
+ (is_qla8032(ha) && qla4_83xx_idc_dontreset(ha))) {
DEBUG2(printk("scsi%ld: %s: Don't Reset HBA\n",
ha->host_no, __func__));
clear_bit(DPC_RESET_HA, &ha->dpc_flags);
ha->isp_ops->disable_intrs(ha);
}
+ if (is_qla40XX(ha)) {
+ writel(set_rmask(CSR_SCSI_PROCESSOR_INTR),
+ &ha->reg->ctrl_status);
+ readl(&ha->reg->ctrl_status);
+ } else if (is_qla8022(ha)) {
+ writel(0, &ha->qla4_82xx_reg->host_int);
+ readl(&ha->qla4_82xx_reg->host_int);
+ } else if (is_qla8032(ha)) {
+ writel(0, &ha->qla4_83xx_reg->risc_intr);
+ readl(&ha->qla4_83xx_reg->risc_intr);
+ }
+
/* Remove timer thread, if present */
if (ha->timer_active)
qla4xxx_stop_timer(ha);
/* Put firmware in known state */
ha->isp_ops->reset_firmware(ha);
- if (is_qla8022(ha)) {
- qla4_8xxx_idc_lock(ha);
+ if (is_qla80XX(ha)) {
+ ha->isp_ops->idc_lock(ha);
qla4_8xxx_clear_drv_active(ha);
- qla4_8xxx_idc_unlock(ha);
+ ha->isp_ops->idc_unlock(ha);
}
/* Detach interrupts */
/* Mapping of IO base pointer, door bell read and write pointer */
/* mapping of IO base pointer */
- ha->qla4_8xxx_reg =
- (struct device_reg_82xx __iomem *)((uint8_t *)ha->nx_pcibase +
- 0xbc000 + (ha->pdev->devfn << 11));
+ if (is_qla8022(ha)) {
+ ha->qla4_82xx_reg = (struct device_reg_82xx __iomem *)
+ ((uint8_t *)ha->nx_pcibase + 0xbc000 +
+ (ha->pdev->devfn << 11));
+ ha->nx_db_wr_ptr = (ha->pdev->devfn == 4 ? QLA82XX_CAM_RAM_DB1 :
+ QLA82XX_CAM_RAM_DB2);
+ } else if (is_qla8032(ha)) {
+ ha->qla4_83xx_reg = (struct device_reg_83xx __iomem *)
+ ((uint8_t *)ha->nx_pcibase);
+ }
db_base = pci_resource_start(pdev, 4); /* doorbell is on bar 4 */
db_len = pci_resource_len(pdev, 4);
- ha->nx_db_wr_ptr = (ha->pdev->devfn == 4 ? QLA82XX_CAM_RAM_DB1 :
- QLA82XX_CAM_RAM_DB2);
-
return 0;
iospace_error_exit:
return -ENOMEM;
.rd_shdw_req_q_out = qla4xxx_rd_shdw_req_q_out,
.rd_shdw_rsp_q_in = qla4xxx_rd_shdw_rsp_q_in,
.get_sys_info = qla4xxx_get_sys_info,
+ .queue_mailbox_command = qla4xxx_queue_mbox_cmd,
+ .process_mailbox_interrupt = qla4xxx_process_mbox_intr,
};
-static struct isp_operations qla4_8xxx_isp_ops = {
+static struct isp_operations qla4_82xx_isp_ops = {
.iospace_config = qla4_8xxx_iospace_config,
.pci_config = qla4_8xxx_pci_config,
- .disable_intrs = qla4_8xxx_disable_intrs,
- .enable_intrs = qla4_8xxx_enable_intrs,
+ .disable_intrs = qla4_82xx_disable_intrs,
+ .enable_intrs = qla4_82xx_enable_intrs,
.start_firmware = qla4_8xxx_load_risc,
- .intr_handler = qla4_8xxx_intr_handler,
- .interrupt_service_routine = qla4_8xxx_interrupt_service_routine,
- .reset_chip = qla4_8xxx_isp_reset,
+ .restart_firmware = qla4_82xx_try_start_fw,
+ .intr_handler = qla4_82xx_intr_handler,
+ .interrupt_service_routine = qla4_82xx_interrupt_service_routine,
+ .need_reset = qla4_8xxx_need_reset,
+ .reset_chip = qla4_82xx_isp_reset,
.reset_firmware = qla4_8xxx_stop_firmware,
- .queue_iocb = qla4_8xxx_queue_iocb,
- .complete_iocb = qla4_8xxx_complete_iocb,
- .rd_shdw_req_q_out = qla4_8xxx_rd_shdw_req_q_out,
- .rd_shdw_rsp_q_in = qla4_8xxx_rd_shdw_rsp_q_in,
+ .queue_iocb = qla4_82xx_queue_iocb,
+ .complete_iocb = qla4_82xx_complete_iocb,
+ .rd_shdw_req_q_out = qla4_82xx_rd_shdw_req_q_out,
+ .rd_shdw_rsp_q_in = qla4_82xx_rd_shdw_rsp_q_in,
.get_sys_info = qla4_8xxx_get_sys_info,
+ .rd_reg_direct = qla4_82xx_rd_32,
+ .wr_reg_direct = qla4_82xx_wr_32,
+ .rd_reg_indirect = qla4_82xx_md_rd_32,
+ .wr_reg_indirect = qla4_82xx_md_wr_32,
+ .idc_lock = qla4_82xx_idc_lock,
+ .idc_unlock = qla4_82xx_idc_unlock,
+ .rom_lock_recovery = qla4_82xx_rom_lock_recovery,
+ .queue_mailbox_command = qla4_82xx_queue_mbox_cmd,
+ .process_mailbox_interrupt = qla4_82xx_process_mbox_intr,
+};
+
+static struct isp_operations qla4_83xx_isp_ops = {
+ .iospace_config = qla4_8xxx_iospace_config,
+ .pci_config = qla4_8xxx_pci_config,
+ .disable_intrs = qla4_83xx_disable_intrs,
+ .enable_intrs = qla4_83xx_enable_intrs,
+ .start_firmware = qla4_8xxx_load_risc,
+ .restart_firmware = qla4_83xx_start_firmware,
+ .intr_handler = qla4_83xx_intr_handler,
+ .interrupt_service_routine = qla4_83xx_interrupt_service_routine,
+ .need_reset = qla4_8xxx_need_reset,
+ .reset_chip = qla4_83xx_isp_reset,
+ .reset_firmware = qla4_8xxx_stop_firmware,
+ .queue_iocb = qla4_83xx_queue_iocb,
+ .complete_iocb = qla4_83xx_complete_iocb,
+ .rd_shdw_req_q_out = qla4_83xx_rd_shdw_req_q_out,
+ .rd_shdw_rsp_q_in = qla4_83xx_rd_shdw_rsp_q_in,
+ .get_sys_info = qla4_8xxx_get_sys_info,
+ .rd_reg_direct = qla4_83xx_rd_reg,
+ .wr_reg_direct = qla4_83xx_wr_reg,
+ .rd_reg_indirect = qla4_83xx_rd_reg_indirect,
+ .wr_reg_indirect = qla4_83xx_wr_reg_indirect,
+ .idc_lock = qla4_83xx_drv_lock,
+ .idc_unlock = qla4_83xx_drv_unlock,
+ .rom_lock_recovery = qla4_83xx_rom_lock_recovery,
+ .queue_mailbox_command = qla4_83xx_queue_mbox_cmd,
+ .process_mailbox_interrupt = qla4_83xx_process_mbox_intr,
};
uint16_t qla4xxx_rd_shdw_req_q_out(struct scsi_qla_host *ha)
return (uint16_t)le32_to_cpu(ha->shadow_regs->req_q_out);
}
-uint16_t qla4_8xxx_rd_shdw_req_q_out(struct scsi_qla_host *ha)
+uint16_t qla4_82xx_rd_shdw_req_q_out(struct scsi_qla_host *ha)
+{
+ return (uint16_t)le32_to_cpu(readl(&ha->qla4_82xx_reg->req_q_out));
+}
+
+uint16_t qla4_83xx_rd_shdw_req_q_out(struct scsi_qla_host *ha)
{
- return (uint16_t)le32_to_cpu(readl(&ha->qla4_8xxx_reg->req_q_out));
+ return (uint16_t)le32_to_cpu(readl(&ha->qla4_83xx_reg->req_q_out));
}
uint16_t qla4xxx_rd_shdw_rsp_q_in(struct scsi_qla_host *ha)
return (uint16_t)le32_to_cpu(ha->shadow_regs->rsp_q_in);
}
-uint16_t qla4_8xxx_rd_shdw_rsp_q_in(struct scsi_qla_host *ha)
+uint16_t qla4_82xx_rd_shdw_rsp_q_in(struct scsi_qla_host *ha)
{
- return (uint16_t)le32_to_cpu(readl(&ha->qla4_8xxx_reg->rsp_q_in));
+ return (uint16_t)le32_to_cpu(readl(&ha->qla4_82xx_reg->rsp_q_in));
+}
+
+uint16_t qla4_83xx_rd_shdw_rsp_q_in(struct scsi_qla_host *ha)
+{
+ return (uint16_t)le32_to_cpu(readl(&ha->qla4_83xx_reg->rsp_q_in));
}
static ssize_t qla4xxx_show_boot_eth_info(void *data, int type, char *buf)
ha->pdev = pdev;
ha->host = host;
ha->host_no = host->host_no;
+ ha->func_num = PCI_FUNC(ha->pdev->devfn);
pci_enable_pcie_error_reporting(pdev);
/* Setup Runtime configurable options */
if (is_qla8022(ha)) {
- ha->isp_ops = &qla4_8xxx_isp_ops;
- rwlock_init(&ha->hw_lock);
+ ha->isp_ops = &qla4_82xx_isp_ops;
+ ha->reg_tbl = (uint32_t *) qla4_82xx_reg_tbl;
ha->qdr_sn_window = -1;
ha->ddr_mn_window = -1;
ha->curr_window = 255;
- ha->func_num = PCI_FUNC(ha->pdev->devfn);
nx_legacy_intr = &legacy_intr[ha->func_num];
ha->nx_legacy_intr.int_vec_bit = nx_legacy_intr->int_vec_bit;
ha->nx_legacy_intr.tgt_status_reg =
nx_legacy_intr->tgt_status_reg;
ha->nx_legacy_intr.tgt_mask_reg = nx_legacy_intr->tgt_mask_reg;
ha->nx_legacy_intr.pci_int_reg = nx_legacy_intr->pci_int_reg;
+ } else if (is_qla8032(ha)) {
+ ha->isp_ops = &qla4_83xx_isp_ops;
+ ha->reg_tbl = (uint32_t *)qla4_83xx_reg_tbl;
} else {
ha->isp_ops = &qla4xxx_isp_ops;
}
- /* Set EEH reset type to fundamental if required by hba */
- if (is_qla8022(ha))
+ if (is_qla80XX(ha)) {
+ rwlock_init(&ha->hw_lock);
+ ha->pf_bit = ha->func_num << 16;
+ /* Set EEH reset type to fundamental if required by hba */
pdev->needs_freset = 1;
+ }
/* Configure PCI I/O space. */
ret = ha->isp_ops->iospace_config(ha);
init_completion(&ha->disable_acb_comp);
spin_lock_init(&ha->hardware_lock);
+ spin_lock_init(&ha->work_lock);
/* Initialize work list */
INIT_LIST_HEAD(&ha->work_list);
if (ret)
goto probe_failed;
- if (is_qla8022(ha))
- (void) qla4_8xxx_get_flash_info(ha);
+ if (is_qla80XX(ha))
+ qla4_8xxx_get_flash_info(ha);
+
+ if (is_qla8032(ha)) {
+ qla4_83xx_read_reset_template(ha);
+ /*
+ * NOTE: If ql4dontresethba==1, set IDC_CTRL DONTRESET_BIT0.
+ * If DONRESET_BIT0 is set, drivers should not set dev_state
+ * to NEED_RESET. But if NEED_RESET is set, drivers should
+ * should honor the reset.
+ */
+ if (ql4xdontresethba == 1)
+ qla4_83xx_set_idc_dontreset(ha);
+ }
/*
* Initialize the Host adapter request/response queues and
* NOTE: interrupts enabled upon successful completion
*/
status = qla4xxx_initialize_adapter(ha, INIT_ADAPTER);
+
+ /* Dont retry adapter initialization if IRQ allocation failed */
+ if (!test_bit(AF_IRQ_ATTACHED, &ha->flags))
+ goto skip_retry_init;
+
while ((!test_bit(AF_ONLINE, &ha->flags)) &&
init_retry_count++ < MAX_INIT_RETRIES) {
- if (is_qla8022(ha)) {
- qla4_8xxx_idc_lock(ha);
- dev_state = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DEV_STATE);
- qla4_8xxx_idc_unlock(ha);
- if (dev_state == QLA82XX_DEV_FAILED) {
+ if (is_qla80XX(ha)) {
+ ha->isp_ops->idc_lock(ha);
+ dev_state = qla4_8xxx_rd_direct(ha,
+ QLA82XX_CRB_DEV_STATE);
+ ha->isp_ops->idc_unlock(ha);
+ if (dev_state == QLA8XXX_DEV_FAILED) {
ql4_printk(KERN_WARNING, ha, "%s: don't retry "
"initialize adapter. H/W is in failed state\n",
__func__);
status = qla4xxx_initialize_adapter(ha, INIT_ADAPTER);
}
+skip_retry_init:
if (!test_bit(AF_ONLINE, &ha->flags)) {
ql4_printk(KERN_WARNING, ha, "Failed to initialize adapter\n");
- if (is_qla8022(ha) && ql4xdontresethba) {
+ if ((is_qla8022(ha) && ql4xdontresethba) ||
+ (is_qla8032(ha) && qla4_83xx_idc_dontreset(ha))) {
/* Put the device in failed state. */
DEBUG2(printk(KERN_ERR "HW STATE: FAILED\n"));
- qla4_8xxx_idc_lock(ha);
- qla4_8xxx_wr_32(ha, QLA82XX_CRB_DEV_STATE,
- QLA82XX_DEV_FAILED);
- qla4_8xxx_idc_unlock(ha);
+ ha->isp_ops->idc_lock(ha);
+ qla4_8xxx_wr_direct(ha, QLA8XXX_CRB_DEV_STATE,
+ QLA8XXX_DEV_FAILED);
+ ha->isp_ops->idc_unlock(ha);
}
ret = -ENODEV;
goto remove_host;
goto remove_host;
}
- /* For ISP-82XX, request_irqs is called in qla4_8xxx_load_risc
+ /*
+ * For ISP-8XXX, request_irqs is called in qla4_8xxx_load_risc
* (which is called indirectly by qla4xxx_initialize_adapter),
* so that irqs will be registered after crbinit but before
* mbx_intr_enable.
*/
- if (!is_qla8022(ha)) {
+ if (is_qla40XX(ha)) {
ret = qla4xxx_request_irqs(ha);
if (ret) {
ql4_printk(KERN_WARNING, ha, "Failed to reserve "
ha->host_no, ha->firmware_version[0], ha->firmware_version[1],
ha->patch_number, ha->build_number);
+ /* Set the driver version */
+ if (is_qla80XX(ha))
+ qla4_8xxx_set_param(ha, SET_DRVR_VERSION);
+
if (qla4xxx_setup_boot_info(ha))
ql4_printk(KERN_ERR, ha,
"%s: No iSCSI boot target configured\n", __func__);
{
struct scsi_qla_host *ha;
+ /*
+ * If the PCI device is disabled then it means probe_adapter had
+ * failed and resources already cleaned up on probe_adapter exit.
+ */
+ if (!pci_is_enabled(pdev))
+ return;
+
ha = pci_get_drvdata(pdev);
- if (!is_qla8022(ha))
+ if (is_qla40XX(ha))
qla4xxx_prevent_other_port_reinit(ha);
/* destroy iface from sysfs */
ha = to_qla_host(cmd->device->host);
- if (ql4xdontresethba) {
+ if (is_qla8032(ha) && ql4xdontresethba)
+ qla4_83xx_set_idc_dontreset(ha);
+
+ /*
+ * For ISP8324, if IDC_CTRL DONTRESET_BIT0 is set by other
+ * protocol drivers, we should not set device_state to
+ * NEED_RESET
+ */
+ if (ql4xdontresethba ||
+ (is_qla8032(ha) && qla4_83xx_idc_dontreset(ha))) {
DEBUG2(printk("scsi%ld: %s: Don't Reset HBA\n",
ha->host_no, __func__));
}
if (!test_bit(DPC_RESET_HA, &ha->dpc_flags)) {
- if (is_qla8022(ha))
+ if (is_qla80XX(ha))
set_bit(DPC_RESET_HA_FW_CONTEXT, &ha->dpc_flags);
else
set_bit(DPC_RESET_HA, &ha->dpc_flags);
break;
case SCSI_FIRMWARE_RESET:
if (!test_bit(DPC_RESET_HA, &ha->dpc_flags)) {
- if (is_qla8022(ha))
+ if (is_qla80XX(ha))
/* set firmware context reset */
set_bit(DPC_RESET_HA_FW_CONTEXT,
&ha->dpc_flags);
"0x%x is the owner\n", ha->host_no, __func__,
ha->pdev->devfn);
- qla4_8xxx_idc_lock(ha);
- qla4_8xxx_wr_32(ha, QLA82XX_CRB_DEV_STATE,
- QLA82XX_DEV_COLD);
-
- qla4_8xxx_wr_32(ha, QLA82XX_CRB_DRV_IDC_VERSION,
- QLA82XX_IDC_VERSION);
+ ha->isp_ops->idc_lock(ha);
+ qla4_8xxx_wr_direct(ha, QLA8XXX_CRB_DEV_STATE,
+ QLA8XXX_DEV_COLD);
+ ha->isp_ops->idc_unlock(ha);
+
+ rval = qla4_8xxx_update_idc_reg(ha);
+ if (rval == QLA_ERROR) {
+ ql4_printk(KERN_INFO, ha, "scsi%ld: %s: HW State: FAILED\n",
+ ha->host_no, __func__);
+ ha->isp_ops->idc_lock(ha);
+ qla4_8xxx_wr_direct(ha, QLA8XXX_CRB_DEV_STATE,
+ QLA8XXX_DEV_FAILED);
+ ha->isp_ops->idc_unlock(ha);
+ goto exit_error_recovery;
+ }
- qla4_8xxx_idc_unlock(ha);
clear_bit(AF_FW_RECOVERY, &ha->flags);
rval = qla4xxx_initialize_adapter(ha, RESET_ADAPTER);
- qla4_8xxx_idc_lock(ha);
if (rval != QLA_SUCCESS) {
ql4_printk(KERN_INFO, ha, "scsi%ld: %s: HW State: "
"FAILED\n", ha->host_no, __func__);
+ ha->isp_ops->idc_lock(ha);
qla4_8xxx_clear_drv_active(ha);
- qla4_8xxx_wr_32(ha, QLA82XX_CRB_DEV_STATE,
- QLA82XX_DEV_FAILED);
+ qla4_8xxx_wr_direct(ha, QLA8XXX_CRB_DEV_STATE,
+ QLA8XXX_DEV_FAILED);
+ ha->isp_ops->idc_unlock(ha);
} else {
ql4_printk(KERN_INFO, ha, "scsi%ld: %s: HW State: "
"READY\n", ha->host_no, __func__);
- qla4_8xxx_wr_32(ha, QLA82XX_CRB_DEV_STATE,
- QLA82XX_DEV_READY);
+ ha->isp_ops->idc_lock(ha);
+ qla4_8xxx_wr_direct(ha, QLA8XXX_CRB_DEV_STATE,
+ QLA8XXX_DEV_READY);
/* Clear driver state register */
- qla4_8xxx_wr_32(ha, QLA82XX_CRB_DRV_STATE, 0);
+ qla4_8xxx_wr_direct(ha, QLA8XXX_CRB_DRV_STATE, 0);
qla4_8xxx_set_drv_active(ha);
+ ha->isp_ops->idc_unlock(ha);
ret = qla4xxx_request_irqs(ha);
if (ret) {
ql4_printk(KERN_WARNING, ha, "Failed to "
rval = QLA_SUCCESS;
}
}
- qla4_8xxx_idc_unlock(ha);
} else {
ql4_printk(KERN_INFO, ha, "scsi%ld: %s: devfn 0x%x is not "
"the reset owner\n", ha->host_no, __func__,
ha->pdev->devfn);
- if ((qla4_8xxx_rd_32(ha, QLA82XX_CRB_DEV_STATE) ==
- QLA82XX_DEV_READY)) {
+ if ((qla4_8xxx_rd_direct(ha, QLA8XXX_CRB_DEV_STATE) ==
+ QLA8XXX_DEV_READY)) {
clear_bit(AF_FW_RECOVERY, &ha->flags);
rval = qla4xxx_initialize_adapter(ha, RESET_ADAPTER);
if (rval == QLA_SUCCESS) {
rval = QLA_SUCCESS;
}
}
- qla4_8xxx_idc_lock(ha);
+ ha->isp_ops->idc_lock(ha);
qla4_8xxx_set_drv_active(ha);
- qla4_8xxx_idc_unlock(ha);
+ ha->isp_ops->idc_unlock(ha);
}
}
+exit_error_recovery:
clear_bit(DPC_RESET_ACTIVE, &ha->dpc_flags);
return rval;
}
ha->isp_ops->disable_intrs(ha);
- if (is_qla8022(ha)) {
+ if (is_qla80XX(ha)) {
if (qla4_8xxx_error_recovery(ha) == QLA_SUCCESS) {
ret = PCI_ERS_RESULT_RECOVERED;
goto exit_slot_reset;
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
},
+ {
+ .vendor = PCI_VENDOR_ID_QLOGIC,
+ .device = PCI_DEVICE_ID_QLOGIC_ISP8324,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ },
{0, 0},
};
MODULE_DEVICE_TABLE(pci, qla4xxx_pci_tbl);