int ql4xdisablesysfsboot = 1;
module_param(ql4xdisablesysfsboot, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(ql4xdisablesysfsboot,
- "Set to disable exporting boot targets to sysfs\n"
- " 0 - Export boot targets\n"
- " 1 - Do not export boot targets (Default)");
+ " Set to disable exporting boot targets to sysfs.\n"
+ "\t\t 0 - Export boot targets\n"
+ "\t\t 1 - Do not export boot targets (Default)");
int ql4xdontresethba = 0;
module_param(ql4xdontresethba, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(ql4xdontresethba,
- "Don't reset the HBA for driver recovery \n"
- " 0 - It will reset HBA (Default)\n"
- " 1 - It will NOT reset HBA");
+ " Don't reset the HBA for driver recovery.\n"
+ "\t\t 0 - It will reset HBA (Default)\n"
+ "\t\t 1 - It will NOT reset HBA");
-int ql4xextended_error_logging = 0; /* 0 = off, 1 = log errors */
+int ql4xextended_error_logging;
module_param(ql4xextended_error_logging, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(ql4xextended_error_logging,
- "Option to enable extended error logging, "
- "Default is 0 - no logging, 1 - debug logging");
+ " Option to enable extended error logging.\n"
+ "\t\t 0 - no logging (Default)\n"
+ "\t\t 2 - debug logging");
int ql4xenablemsix = 1;
module_param(ql4xenablemsix, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(ql4xenablemsix,
- "Set to enable MSI or MSI-X interrupt mechanism.\n"
- " 0 = enable INTx interrupt mechanism.\n"
- " 1 = enable MSI-X interrupt mechanism (Default).\n"
- " 2 = enable MSI interrupt mechanism.");
+ " Set to enable MSI or MSI-X interrupt mechanism.\n"
+ "\t\t 0 = enable INTx interrupt mechanism.\n"
+ "\t\t 1 = enable MSI-X interrupt mechanism (Default).\n"
+ "\t\t 2 = enable MSI interrupt mechanism.");
#define QL4_DEF_QDEPTH 32
static int ql4xmaxqdepth = QL4_DEF_QDEPTH;
module_param(ql4xmaxqdepth, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(ql4xmaxqdepth,
- "Maximum queue depth to report for target devices.\n"
- " Default: 32.");
+ " Maximum queue depth to report for target devices.\n"
+ "\t\t Default: 32.");
static int ql4xsess_recovery_tmo = QL4_SESS_RECOVERY_TMO;
module_param(ql4xsess_recovery_tmo, int, S_IRUGO);
MODULE_PARM_DESC(ql4xsess_recovery_tmo,
"Target Session Recovery Timeout.\n"
- " Default: 120 sec.");
+ "\t\t Default: 120 sec.");
static int qla4xxx_wait_for_hba_online(struct scsi_qla_host *ha);
/*
static int qla4xxx_slave_alloc(struct scsi_device *device);
static int qla4xxx_slave_configure(struct scsi_device *device);
static void qla4xxx_slave_destroy(struct scsi_device *sdev);
-static mode_t ql4_attr_is_visible(int param_type, int param);
+static umode_t ql4_attr_is_visible(int param_type, int param);
static int qla4xxx_host_reset(struct Scsi_Host *shost, int reset_type);
static struct qla4_8xxx_legacy_intr_set legacy_intr[] =
static struct scsi_transport_template *qla4xxx_scsi_transport;
-static mode_t ql4_attr_is_visible(int param_type, int param)
+static umode_t ql4_attr_is_visible(int param_type, int param)
{
switch (param_type) {
case ISCSI_HOST_PARAM:
case ISCSI_HOST_PARAM_HWADDRESS:
case ISCSI_HOST_PARAM_IPADDRESS:
case ISCSI_HOST_PARAM_INITIATOR_NAME:
+ case ISCSI_HOST_PARAM_PORT_STATE:
+ case ISCSI_HOST_PARAM_PORT_SPEED:
return S_IRUGO;
default:
return 0;
return ret;
}
+static void qla4xxx_set_port_speed(struct Scsi_Host *shost)
+{
+ struct scsi_qla_host *ha = to_qla_host(shost);
+ struct iscsi_cls_host *ihost = shost_priv(shost);
+ uint32_t speed = ISCSI_PORT_SPEED_UNKNOWN;
+
+ qla4xxx_get_firmware_state(ha);
+
+ switch (ha->addl_fw_state & 0x0F00) {
+ case FW_ADDSTATE_LINK_SPEED_10MBPS:
+ speed = ISCSI_PORT_SPEED_10MBPS;
+ break;
+ case FW_ADDSTATE_LINK_SPEED_100MBPS:
+ speed = ISCSI_PORT_SPEED_100MBPS;
+ break;
+ case FW_ADDSTATE_LINK_SPEED_1GBPS:
+ speed = ISCSI_PORT_SPEED_1GBPS;
+ break;
+ case FW_ADDSTATE_LINK_SPEED_10GBPS:
+ speed = ISCSI_PORT_SPEED_10GBPS;
+ break;
+ }
+ ihost->port_speed = speed;
+}
+
+static void qla4xxx_set_port_state(struct Scsi_Host *shost)
+{
+ struct scsi_qla_host *ha = to_qla_host(shost);
+ struct iscsi_cls_host *ihost = shost_priv(shost);
+ uint32_t state = ISCSI_PORT_STATE_DOWN;
+
+ if (test_bit(AF_LINK_UP, &ha->flags))
+ state = ISCSI_PORT_STATE_UP;
+
+ ihost->port_state = state;
+}
+
static int qla4xxx_host_get_param(struct Scsi_Host *shost,
enum iscsi_host_param param, char *buf)
{
case ISCSI_HOST_PARAM_INITIATOR_NAME:
len = sprintf(buf, "%s\n", ha->name_string);
break;
+ case ISCSI_HOST_PARAM_PORT_STATE:
+ qla4xxx_set_port_state(shost);
+ len = sprintf(buf, "%s\n", iscsi_get_port_state_name(shost));
+ break;
+ case ISCSI_HOST_PARAM_PORT_SPEED:
+ qla4xxx_set_port_speed(shost);
+ len = sprintf(buf, "%s\n", iscsi_get_port_speed_name(shost));
+ break;
default:
return -ENOSYS;
}
goto exit_init_fw_cb;
}
- qla4xxx_disable_acb(ha);
+ rval = qla4xxx_disable_acb(ha);
+ if (rval != QLA_SUCCESS) {
+ ql4_printk(KERN_ERR, ha, "%s: disable acb mbx failed\n",
+ __func__);
+ rval = -EIO;
+ goto exit_init_fw_cb;
+ }
+
+ wait_for_completion_timeout(&ha->disable_acb_comp,
+ DISABLE_ACB_TOV * HZ);
qla4xxx_initcb_to_acb(init_fw_cb);
(char *)ha->name_string, buflen);
iscsi_set_param(cls_conn, ISCSI_PARAM_PERSISTENT_ADDRESS,
(char *)ip_addr, buflen);
+ iscsi_set_param(cls_conn, ISCSI_PARAM_TARGET_ALIAS,
+ (char *)fw_ddb_entry->iscsi_alias, buflen);
}
void qla4xxx_update_session_conn_fwddb_param(struct scsi_qla_host *ha,
/* Update timers after login */
ddb_entry->default_relogin_timeout =
- le16_to_cpu(fw_ddb_entry->def_timeout);
+ (le16_to_cpu(fw_ddb_entry->def_timeout) > LOGIN_TOV) &&
+ (le16_to_cpu(fw_ddb_entry->def_timeout) < LOGIN_TOV * 10) ?
+ le16_to_cpu(fw_ddb_entry->def_timeout) : LOGIN_TOV;
ddb_entry->default_time2wait =
le16_to_cpu(fw_ddb_entry->iscsi_def_time2wait);
memcpy(sess->initiatorname, ha->name_string,
min(sizeof(ha->name_string), sizeof(sess->initiatorname)));
+ iscsi_set_param(cls_conn, ISCSI_PARAM_TARGET_ALIAS,
+ (char *)fw_ddb_entry->iscsi_alias, 0);
+
exit_session_conn_param:
if (fw_ddb_entry)
dma_free_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry),
return QLA_ERROR;
}
+/**
+ * qla4_8xxx_check_temp - Check the ISP82XX temperature.
+ * @ha: adapter block pointer.
+ *
+ * Note: The caller should not hold the idc lock.
+ **/
+static int qla4_8xxx_check_temp(struct scsi_qla_host *ha)
+{
+ uint32_t temp, temp_state, temp_val;
+ int status = QLA_SUCCESS;
+
+ temp = qla4_8xxx_rd_32(ha, CRB_TEMP_STATE);
+
+ temp_state = qla82xx_get_temp_state(temp);
+ temp_val = qla82xx_get_temp_val(temp);
+
+ if (temp_state == QLA82XX_TEMP_PANIC) {
+ ql4_printk(KERN_WARNING, ha, "Device temperature %d degrees C"
+ " exceeds maximum allowed. Hardware has been shut"
+ " down.\n", temp_val);
+ status = QLA_ERROR;
+ } else if (temp_state == QLA82XX_TEMP_WARN) {
+ if (ha->temperature == QLA82XX_TEMP_NORMAL)
+ ql4_printk(KERN_WARNING, ha, "Device temperature %d"
+ " degrees C exceeds operating range."
+ " Immediate action needed.\n", temp_val);
+ } else {
+ if (ha->temperature == QLA82XX_TEMP_WARN)
+ ql4_printk(KERN_INFO, ha, "Device temperature is"
+ " now %d degrees C in normal range.\n",
+ temp_val);
+ }
+ ha->temperature = temp_state;
+ return status;
+}
+
/**
* qla4_8xxx_check_fw_alive - Check firmware health
* @ha: Pointer to host adapter structure.
*
* Context: Interrupt
**/
-static void qla4_8xxx_check_fw_alive(struct scsi_qla_host *ha)
+static int qla4_8xxx_check_fw_alive(struct scsi_qla_host *ha)
{
- uint32_t fw_heartbeat_counter, halt_status;
+ uint32_t fw_heartbeat_counter;
+ int status = QLA_SUCCESS;
fw_heartbeat_counter = qla4_8xxx_rd_32(ha, QLA82XX_PEG_ALIVE_COUNTER);
/* If PEG_ALIVE_COUNTER is 0xffffffff, AER/EEH is in progress, ignore */
DEBUG2(printk(KERN_WARNING "scsi%ld: %s: Device in frozen "
"state, QLA82XX_PEG_ALIVE_COUNTER is 0xffffffff\n",
ha->host_no, __func__));
- return;
+ return status;
}
if (ha->fw_heartbeat_counter == fw_heartbeat_counter) {
/* FW not alive after 2 seconds */
if (ha->seconds_since_last_heartbeat == 2) {
ha->seconds_since_last_heartbeat = 0;
- halt_status = qla4_8xxx_rd_32(ha,
- QLA82XX_PEG_HALT_STATUS1);
ql4_printk(KERN_INFO, ha,
"scsi(%ld): %s, Dumping hw/fw registers:\n "
" 0x%x,\n PEG_NET_0_PC: 0x%x, PEG_NET_1_PC:"
" 0x%x,\n PEG_NET_2_PC: 0x%x, PEG_NET_3_PC:"
" 0x%x,\n PEG_NET_4_PC: 0x%x\n",
- ha->host_no, __func__, halt_status,
+ ha->host_no, __func__,
+ qla4_8xxx_rd_32(ha,
+ QLA82XX_PEG_HALT_STATUS1),
qla4_8xxx_rd_32(ha,
QLA82XX_PEG_HALT_STATUS2),
qla4_8xxx_rd_32(ha, QLA82XX_CRB_PEG_NET_0 +
0x3c),
qla4_8xxx_rd_32(ha, QLA82XX_CRB_PEG_NET_4 +
0x3c));
-
- /* Since we cannot change dev_state in interrupt
- * context, set appropriate DPC flag then wakeup
- * DPC */
- if (halt_status & HALT_STATUS_UNRECOVERABLE)
- set_bit(DPC_HA_UNRECOVERABLE, &ha->dpc_flags);
- else {
- printk("scsi%ld: %s: detect abort needed!\n",
- ha->host_no, __func__);
- set_bit(DPC_RESET_HA, &ha->dpc_flags);
- }
- qla4xxx_wake_dpc(ha);
- qla4xxx_mailbox_premature_completion(ha);
+ status = QLA_ERROR;
}
} else
ha->seconds_since_last_heartbeat = 0;
ha->fw_heartbeat_counter = fw_heartbeat_counter;
+ return status;
}
/**
**/
void qla4_8xxx_watchdog(struct scsi_qla_host *ha)
{
- uint32_t dev_state;
-
- dev_state = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DEV_STATE);
+ uint32_t dev_state, halt_status;
/* don't poll if reset is going on */
if (!(test_bit(DPC_RESET_ACTIVE, &ha->dpc_flags) ||
test_bit(DPC_RESET_HA, &ha->dpc_flags) ||
test_bit(DPC_RETRY_RESET_HA, &ha->dpc_flags))) {
- if (dev_state == QLA82XX_DEV_NEED_RESET &&
+ dev_state = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DEV_STATE);
+
+ if (qla4_8xxx_check_temp(ha)) {
+ ql4_printk(KERN_INFO, ha, "disabling pause"
+ " transmit on port 0 & 1.\n");
+ qla4_8xxx_wr_32(ha, QLA82XX_CRB_NIU + 0x98,
+ CRB_NIU_XG_PAUSE_CTL_P0 |
+ CRB_NIU_XG_PAUSE_CTL_P1);
+ set_bit(DPC_HA_UNRECOVERABLE, &ha->dpc_flags);
+ qla4xxx_wake_dpc(ha);
+ } else if (dev_state == QLA82XX_DEV_NEED_RESET &&
!test_bit(DPC_RESET_HA, &ha->dpc_flags)) {
if (!ql4xdontresethba) {
ql4_printk(KERN_INFO, ha, "%s: HW State: "
"NEED RESET!\n", __func__);
set_bit(DPC_RESET_HA, &ha->dpc_flags);
qla4xxx_wake_dpc(ha);
- qla4xxx_mailbox_premature_completion(ha);
}
} else if (dev_state == QLA82XX_DEV_NEED_QUIESCENT &&
!test_bit(DPC_HA_NEED_QUIESCENT, &ha->dpc_flags)) {
qla4xxx_wake_dpc(ha);
} else {
/* Check firmware health */
- qla4_8xxx_check_fw_alive(ha);
+ if (qla4_8xxx_check_fw_alive(ha)) {
+ ql4_printk(KERN_INFO, ha, "disabling pause"
+ " transmit on port 0 & 1.\n");
+ qla4_8xxx_wr_32(ha, QLA82XX_CRB_NIU + 0x98,
+ CRB_NIU_XG_PAUSE_CTL_P0 |
+ CRB_NIU_XG_PAUSE_CTL_P1);
+ halt_status = qla4_8xxx_rd_32(ha,
+ QLA82XX_PEG_HALT_STATUS1);
+
+ if (LSW(MSB(halt_status)) == 0x67)
+ ql4_printk(KERN_ERR, ha, "%s:"
+ " Firmware aborted with"
+ " error code 0x00006700."
+ " Device is being reset\n",
+ __func__);
+
+ /* Since we cannot change dev_state in interrupt
+ * context, set appropriate DPC flag then wakeup
+ * DPC */
+ if (halt_status & HALT_STATUS_UNRECOVERABLE)
+ set_bit(DPC_HA_UNRECOVERABLE,
+ &ha->dpc_flags);
+ else {
+ ql4_printk(KERN_INFO, ha, "%s: detect "
+ "abort needed!\n", __func__);
+ set_bit(DPC_RESET_HA, &ha->dpc_flags);
+ }
+ qla4xxx_mailbox_premature_completion(ha);
+ qla4xxx_wake_dpc(ha);
+ }
}
}
}
-void qla4xxx_check_relogin_flash_ddb(struct iscsi_cls_session *cls_sess)
+static void qla4xxx_check_relogin_flash_ddb(struct iscsi_cls_session *cls_sess)
{
struct iscsi_session *sess;
struct ddb_entry *ddb_entry;
{
int status = QLA_ERROR;
uint8_t reset_chip = 0;
+ uint32_t dev_state;
+ unsigned long wait;
/* Stall incoming I/O until we are done */
scsi_block_requests(ha->host);
* or if stop_firmware fails for ISP-82xx.
* This is the default case for ISP-4xxx */
if (!is_qla8022(ha) || reset_chip) {
+ if (!is_qla8022(ha))
+ goto chip_reset;
+
+ /* Check if 82XX firmware is alive or not
+ * We may have arrived here from NEED_RESET
+ * detection only */
+ if (test_bit(AF_FW_RECOVERY, &ha->flags))
+ goto chip_reset;
+
+ wait = jiffies + (FW_ALIVE_WAIT_TOV * HZ);
+ while (time_before(jiffies, wait)) {
+ if (qla4_8xxx_check_fw_alive(ha)) {
+ qla4xxx_mailbox_premature_completion(ha);
+ break;
+ }
+
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(HZ);
+ }
+
if (!test_bit(AF_FW_RECOVERY, &ha->flags))
qla4xxx_cmd_wait(ha);
+chip_reset:
qla4xxx_process_aen(ha, FLUSH_DDB_CHANGED_AENS);
qla4xxx_abort_active_cmds(ha, DID_RESET << 16);
DEBUG2(ql4_printk(KERN_INFO, ha,
* Since we don't want to block the DPC for too long
* with multiple resets in the same thread,
* utilize DPC to retry */
+ if (is_qla8022(ha)) {
+ qla4_8xxx_idc_lock(ha);
+ dev_state = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DEV_STATE);
+ qla4_8xxx_idc_unlock(ha);
+ if (dev_state == QLA82XX_DEV_FAILED) {
+ ql4_printk(KERN_INFO, ha, "%s: don't retry "
+ "recover adapter. H/W is in Failed "
+ "state\n", __func__);
+ qla4xxx_dead_adapter_cleanup(ha);
+ clear_bit(DPC_RETRY_RESET_HA, &ha->dpc_flags);
+ clear_bit(DPC_RESET_HA, &ha->dpc_flags);
+ clear_bit(DPC_RESET_HA_FW_CONTEXT,
+ &ha->dpc_flags);
+ status = QLA_ERROR;
+
+ goto exit_recover;
+ }
+ }
+
if (!test_bit(DPC_RETRY_RESET_HA, &ha->dpc_flags)) {
ha->retry_reset_ha_cnt = MAX_RESET_HA_RETRIES;
DEBUG2(printk("scsi%ld: recover adapter - retrying "
clear_bit(DPC_RETRY_RESET_HA, &ha->dpc_flags);
}
+exit_recover:
ha->adapter_error_count++;
if (test_bit(AF_ONLINE, &ha->flags))
**/
static void qla4xxx_free_adapter(struct scsi_qla_host *ha)
{
+ qla4xxx_abort_active_cmds(ha, DID_NO_CONNECT << 16);
if (test_bit(AF_INTERRUPTS_ON, &ha->flags)) {
/* Turn-off interrupts on the card. */
return rc;
}
-static mode_t qla4xxx_eth_get_attr_visibility(void *data, int type)
+static umode_t qla4xxx_eth_get_attr_visibility(void *data, int type)
{
int rc;
return rc;
}
-static mode_t qla4xxx_ini_get_attr_visibility(void *data, int type)
+static umode_t qla4xxx_ini_get_attr_visibility(void *data, int type)
{
int rc;
return qla4xxx_show_boot_tgt_info(boot_sess, type, buf);
}
-static mode_t qla4xxx_tgt_get_attr_visibility(void *data, int type)
+static umode_t qla4xxx_tgt_get_attr_visibility(void *data, int type)
{
int rc;
return ret;
}
-static void qla4xxx_free_nt_list(struct list_head *list_nt)
+static void qla4xxx_free_ddb_list(struct list_head *list_ddb)
{
- struct qla_ddb_index *nt_ddb_idx, *nt_ddb_idx_tmp;
+ struct qla_ddb_index *ddb_idx, *ddb_idx_tmp;
- /* Free up the normaltargets list */
- list_for_each_entry_safe(nt_ddb_idx, nt_ddb_idx_tmp, list_nt, list) {
- list_del_init(&nt_ddb_idx->list);
- vfree(nt_ddb_idx);
+ list_for_each_entry_safe(ddb_idx, ddb_idx_tmp, list_ddb, list) {
+ list_del_init(&ddb_idx->list);
+ vfree(ddb_idx);
}
-
}
static struct iscsi_endpoint *qla4xxx_get_ep_fwdb(struct scsi_qla_host *ha,
static void qla4xxx_setup_flash_ddb_entry(struct scsi_qla_host *ha,
struct ddb_entry *ddb_entry)
{
+ uint16_t def_timeout;
+
ddb_entry->ddb_type = FLASH_DDB;
ddb_entry->fw_ddb_index = INVALID_ENTRY;
ddb_entry->fw_ddb_device_state = DDB_DS_NO_CONNECTION_ACTIVE;
atomic_set(&ddb_entry->retry_relogin_timer, INVALID_ENTRY);
atomic_set(&ddb_entry->relogin_timer, 0);
atomic_set(&ddb_entry->relogin_retry_count, 0);
-
+ def_timeout = le16_to_cpu(ddb_entry->fw_ddb_entry.def_timeout);
ddb_entry->default_relogin_timeout =
- le16_to_cpu(ddb_entry->fw_ddb_entry.def_timeout);
+ (def_timeout > LOGIN_TOV) && (def_timeout < LOGIN_TOV * 10) ?
+ def_timeout : LOGIN_TOV;
ddb_entry->default_time2wait =
le16_to_cpu(ddb_entry->fw_ddb_entry.iscsi_def_time2wait);
}
ip_state == IP_ADDRSTATE_DEPRICATED ||
ip_state == IP_ADDRSTATE_DISABLING)
ip_idx[idx] = -1;
-
}
/* Break if all IP states checked */
} while (time_after(wtime, jiffies));
}
-void qla4xxx_build_ddb_list(struct scsi_qla_host *ha, int is_reset)
+static void qla4xxx_build_st_list(struct scsi_qla_host *ha,
+ struct list_head *list_st)
{
+ struct qla_ddb_index *st_ddb_idx;
int max_ddbs;
+ int fw_idx_size;
+ struct dev_db_entry *fw_ddb_entry;
+ dma_addr_t fw_ddb_dma;
int ret;
uint32_t idx = 0, next_idx = 0;
uint32_t state = 0, conn_err = 0;
- uint16_t conn_id;
- struct dev_db_entry *fw_ddb_entry;
- struct ddb_entry *ddb_entry = NULL;
- dma_addr_t fw_ddb_dma;
- struct iscsi_cls_session *cls_sess;
- struct iscsi_session *sess;
- struct iscsi_cls_conn *cls_conn;
- struct iscsi_endpoint *ep;
- uint16_t cmds_max = 32, tmo = 0;
- uint32_t initial_cmdsn = 0;
- struct list_head list_st, list_nt; /* List of sendtargets */
- struct qla_ddb_index *st_ddb_idx, *st_ddb_idx_tmp;
- int fw_idx_size;
- unsigned long wtime;
- struct qla_ddb_index *nt_ddb_idx;
-
- if (!test_bit(AF_LINK_UP, &ha->flags)) {
- set_bit(AF_BUILD_DDB_LIST, &ha->flags);
- ha->is_reset = is_reset;
- return;
- }
- max_ddbs = is_qla40XX(ha) ? MAX_DEV_DB_ENTRIES_40XX :
- MAX_DEV_DB_ENTRIES;
+ uint16_t conn_id = 0;
fw_ddb_entry = dma_pool_alloc(ha->fw_ddb_dma_pool, GFP_KERNEL,
&fw_ddb_dma);
if (fw_ddb_entry == NULL) {
DEBUG2(ql4_printk(KERN_ERR, ha, "Out of memory\n"));
- goto exit_ddb_list;
+ goto exit_st_list;
}
- INIT_LIST_HEAD(&list_st);
- INIT_LIST_HEAD(&list_nt);
+ max_ddbs = is_qla40XX(ha) ? MAX_DEV_DB_ENTRIES_40XX :
+ MAX_DEV_DB_ENTRIES;
fw_idx_size = sizeof(struct qla_ddb_index);
for (idx = 0; idx < max_ddbs; idx = next_idx) {
- ret = qla4xxx_get_fwddb_entry(ha, idx, fw_ddb_entry,
- fw_ddb_dma, NULL,
- &next_idx, &state, &conn_err,
- NULL, &conn_id);
+ ret = qla4xxx_get_fwddb_entry(ha, idx, fw_ddb_entry, fw_ddb_dma,
+ NULL, &next_idx, &state,
+ &conn_err, NULL, &conn_id);
if (ret == QLA_ERROR)
break;
- if (qla4xxx_verify_boot_idx(ha, idx) != QLA_SUCCESS)
- goto continue_next_st;
-
/* Check if ST, add to the list_st */
if (strlen((char *) fw_ddb_entry->iscsi_name) != 0)
goto continue_next_st;
st_ddb_idx->fw_ddb_idx = idx;
- list_add_tail(&st_ddb_idx->list, &list_st);
+ list_add_tail(&st_ddb_idx->list, list_st);
continue_next_st:
if (next_idx == 0)
break;
}
- /* Before issuing conn open mbox, ensure all IPs states are configured
- * Note, conn open fails if IPs are not configured
+exit_st_list:
+ if (fw_ddb_entry)
+ dma_pool_free(ha->fw_ddb_dma_pool, fw_ddb_entry, fw_ddb_dma);
+}
+
+/**
+ * qla4xxx_remove_failed_ddb - Remove inactive or failed ddb from list
+ * @ha: pointer to adapter structure
+ * @list_ddb: List from which failed ddb to be removed
+ *
+ * Iterate over the list of DDBs and find and remove DDBs that are either in
+ * no connection active state or failed state
+ **/
+static void qla4xxx_remove_failed_ddb(struct scsi_qla_host *ha,
+ struct list_head *list_ddb)
+{
+ struct qla_ddb_index *ddb_idx, *ddb_idx_tmp;
+ uint32_t next_idx = 0;
+ uint32_t state = 0, conn_err = 0;
+ int ret;
+
+ list_for_each_entry_safe(ddb_idx, ddb_idx_tmp, list_ddb, list) {
+ ret = qla4xxx_get_fwddb_entry(ha, ddb_idx->fw_ddb_idx,
+ NULL, 0, NULL, &next_idx, &state,
+ &conn_err, NULL, NULL);
+ if (ret == QLA_ERROR)
+ continue;
+
+ if (state == DDB_DS_NO_CONNECTION_ACTIVE ||
+ state == DDB_DS_SESSION_FAILED) {
+ list_del_init(&ddb_idx->list);
+ vfree(ddb_idx);
+ }
+ }
+}
+
+static int qla4xxx_sess_conn_setup(struct scsi_qla_host *ha,
+ struct dev_db_entry *fw_ddb_entry,
+ int is_reset)
+{
+ struct iscsi_cls_session *cls_sess;
+ struct iscsi_session *sess;
+ struct iscsi_cls_conn *cls_conn;
+ struct iscsi_endpoint *ep;
+ uint16_t cmds_max = 32;
+ uint16_t conn_id = 0;
+ uint32_t initial_cmdsn = 0;
+ int ret = QLA_SUCCESS;
+
+ struct ddb_entry *ddb_entry = NULL;
+
+ /* Create session object, with INVALID_ENTRY,
+ * the targer_id would get set when we issue the login
*/
- qla4xxx_wait_for_ip_configuration(ha);
+ cls_sess = iscsi_session_setup(&qla4xxx_iscsi_transport, ha->host,
+ cmds_max, sizeof(struct ddb_entry),
+ sizeof(struct ql4_task_data),
+ initial_cmdsn, INVALID_ENTRY);
+ if (!cls_sess) {
+ ret = QLA_ERROR;
+ goto exit_setup;
+ }
- /* Go thru the STs and fire the sendtargets by issuing conn open mbx */
- list_for_each_entry_safe(st_ddb_idx, st_ddb_idx_tmp, &list_st, list) {
- qla4xxx_conn_open(ha, st_ddb_idx->fw_ddb_idx);
+ /*
+ * so calling module_put function to decrement the
+ * reference count.
+ **/
+ module_put(qla4xxx_iscsi_transport.owner);
+ sess = cls_sess->dd_data;
+ ddb_entry = sess->dd_data;
+ ddb_entry->sess = cls_sess;
+
+ cls_sess->recovery_tmo = ql4xsess_recovery_tmo;
+ memcpy(&ddb_entry->fw_ddb_entry, fw_ddb_entry,
+ sizeof(struct dev_db_entry));
+
+ qla4xxx_setup_flash_ddb_entry(ha, ddb_entry);
+
+ cls_conn = iscsi_conn_setup(cls_sess, sizeof(struct qla_conn), conn_id);
+
+ if (!cls_conn) {
+ ret = QLA_ERROR;
+ goto exit_setup;
}
- /* Wait to ensure all sendtargets are done for min 12 sec wait */
- tmo = ((ha->def_timeout < LOGIN_TOV) ? LOGIN_TOV : ha->def_timeout);
- DEBUG2(ql4_printk(KERN_INFO, ha,
- "Default time to wait for build ddb %d\n", tmo));
+ ddb_entry->conn = cls_conn;
- wtime = jiffies + (HZ * tmo);
- do {
- list_for_each_entry_safe(st_ddb_idx, st_ddb_idx_tmp, &list_st,
- list) {
- ret = qla4xxx_get_fwddb_entry(ha,
- st_ddb_idx->fw_ddb_idx,
- NULL, 0, NULL, &next_idx,
- &state, &conn_err, NULL,
- NULL);
- if (ret == QLA_ERROR)
- continue;
+ /* Setup ep, for displaying attributes in sysfs */
+ ep = qla4xxx_get_ep_fwdb(ha, fw_ddb_entry);
+ if (ep) {
+ ep->conn = cls_conn;
+ cls_conn->ep = ep;
+ } else {
+ DEBUG2(ql4_printk(KERN_ERR, ha, "Unable to get ep\n"));
+ ret = QLA_ERROR;
+ goto exit_setup;
+ }
- if (state == DDB_DS_NO_CONNECTION_ACTIVE ||
- state == DDB_DS_SESSION_FAILED) {
- list_del_init(&st_ddb_idx->list);
- vfree(st_ddb_idx);
- }
- }
- schedule_timeout_uninterruptible(HZ / 10);
- } while (time_after(wtime, jiffies));
+ /* Update sess/conn params */
+ qla4xxx_copy_fwddb_param(ha, fw_ddb_entry, cls_sess, cls_conn);
- /* Free up the sendtargets list */
- list_for_each_entry_safe(st_ddb_idx, st_ddb_idx_tmp, &list_st, list) {
- list_del_init(&st_ddb_idx->list);
- vfree(st_ddb_idx);
+ if (is_reset == RESET_ADAPTER) {
+ iscsi_block_session(cls_sess);
+ /* Use the relogin path to discover new devices
+ * by short-circuting the logic of setting
+ * timer to relogin - instead set the flags
+ * to initiate login right away.
+ */
+ set_bit(DPC_RELOGIN_DEVICE, &ha->dpc_flags);
+ set_bit(DF_RELOGIN, &ddb_entry->flags);
}
+exit_setup:
+ return ret;
+}
+
+static void qla4xxx_build_nt_list(struct scsi_qla_host *ha,
+ struct list_head *list_nt, int is_reset)
+{
+ struct dev_db_entry *fw_ddb_entry;
+ dma_addr_t fw_ddb_dma;
+ int max_ddbs;
+ int fw_idx_size;
+ int ret;
+ uint32_t idx = 0, next_idx = 0;
+ uint32_t state = 0, conn_err = 0;
+ uint16_t conn_id = 0;
+ struct qla_ddb_index *nt_ddb_idx;
+
+ fw_ddb_entry = dma_pool_alloc(ha->fw_ddb_dma_pool, GFP_KERNEL,
+ &fw_ddb_dma);
+ if (fw_ddb_entry == NULL) {
+ DEBUG2(ql4_printk(KERN_ERR, ha, "Out of memory\n"));
+ goto exit_nt_list;
+ }
+ max_ddbs = is_qla40XX(ha) ? MAX_DEV_DB_ENTRIES_40XX :
+ MAX_DEV_DB_ENTRIES;
+ fw_idx_size = sizeof(struct qla_ddb_index);
+
for (idx = 0; idx < max_ddbs; idx = next_idx) {
- ret = qla4xxx_get_fwddb_entry(ha, idx, fw_ddb_entry,
- fw_ddb_dma, NULL,
- &next_idx, &state, &conn_err,
- NULL, &conn_id);
+ ret = qla4xxx_get_fwddb_entry(ha, idx, fw_ddb_entry, fw_ddb_dma,
+ NULL, &next_idx, &state,
+ &conn_err, NULL, &conn_id);
if (ret == QLA_ERROR)
break;
if (strlen((char *) fw_ddb_entry->iscsi_name) == 0)
goto continue_next_nt;
- if (state == DDB_DS_NO_CONNECTION_ACTIVE ||
- state == DDB_DS_SESSION_FAILED) {
- DEBUG2(ql4_printk(KERN_INFO, ha,
- "Adding DDB to session = 0x%x\n",
- idx));
- if (is_reset == INIT_ADAPTER) {
- nt_ddb_idx = vmalloc(fw_idx_size);
- if (!nt_ddb_idx)
- break;
-
- nt_ddb_idx->fw_ddb_idx = idx;
-
- memcpy(&nt_ddb_idx->fw_ddb, fw_ddb_entry,
- sizeof(struct dev_db_entry));
-
- if (qla4xxx_is_flash_ddb_exists(ha, &list_nt,
- fw_ddb_entry) == QLA_SUCCESS) {
- vfree(nt_ddb_idx);
- goto continue_next_nt;
- }
- list_add_tail(&nt_ddb_idx->list, &list_nt);
- } else if (is_reset == RESET_ADAPTER) {
- if (qla4xxx_is_session_exists(ha,
- fw_ddb_entry) == QLA_SUCCESS)
- goto continue_next_nt;
- }
+ if (!(state == DDB_DS_NO_CONNECTION_ACTIVE ||
+ state == DDB_DS_SESSION_FAILED))
+ goto continue_next_nt;
- /* Create session object, with INVALID_ENTRY,
- * the targer_id would get set when we issue the login
- */
- cls_sess = iscsi_session_setup(&qla4xxx_iscsi_transport,
- ha->host, cmds_max,
- sizeof(struct ddb_entry),
- sizeof(struct ql4_task_data),
- initial_cmdsn, INVALID_ENTRY);
- if (!cls_sess)
- goto exit_ddb_list;
+ DEBUG2(ql4_printk(KERN_INFO, ha,
+ "Adding DDB to session = 0x%x\n", idx));
+ if (is_reset == INIT_ADAPTER) {
+ nt_ddb_idx = vmalloc(fw_idx_size);
+ if (!nt_ddb_idx)
+ break;
- /*
- * iscsi_session_setup increments the driver reference
- * count which wouldn't let the driver to be unloaded.
- * so calling module_put function to decrement the
- * reference count.
- **/
- module_put(qla4xxx_iscsi_transport.owner);
- sess = cls_sess->dd_data;
- ddb_entry = sess->dd_data;
- ddb_entry->sess = cls_sess;
+ nt_ddb_idx->fw_ddb_idx = idx;
- cls_sess->recovery_tmo = ql4xsess_recovery_tmo;
- memcpy(&ddb_entry->fw_ddb_entry, fw_ddb_entry,
+ memcpy(&nt_ddb_idx->fw_ddb, fw_ddb_entry,
sizeof(struct dev_db_entry));
- qla4xxx_setup_flash_ddb_entry(ha, ddb_entry);
-
- cls_conn = iscsi_conn_setup(cls_sess,
- sizeof(struct qla_conn),
- conn_id);
- if (!cls_conn)
- goto exit_ddb_list;
-
- ddb_entry->conn = cls_conn;
-
- /* Setup ep, for displaying attributes in sysfs */
- ep = qla4xxx_get_ep_fwdb(ha, fw_ddb_entry);
- if (ep) {
- ep->conn = cls_conn;
- cls_conn->ep = ep;
- } else {
- DEBUG2(ql4_printk(KERN_ERR, ha,
- "Unable to get ep\n"));
- }
-
- /* Update sess/conn params */
- qla4xxx_copy_fwddb_param(ha, fw_ddb_entry, cls_sess,
- cls_conn);
-
- if (is_reset == RESET_ADAPTER) {
- iscsi_block_session(cls_sess);
- /* Use the relogin path to discover new devices
- * by short-circuting the logic of setting
- * timer to relogin - instead set the flags
- * to initiate login right away.
- */
- set_bit(DPC_RELOGIN_DEVICE, &ha->dpc_flags);
- set_bit(DF_RELOGIN, &ddb_entry->flags);
+ if (qla4xxx_is_flash_ddb_exists(ha, list_nt,
+ fw_ddb_entry) == QLA_SUCCESS) {
+ vfree(nt_ddb_idx);
+ goto continue_next_nt;
}
+ list_add_tail(&nt_ddb_idx->list, list_nt);
+ } else if (is_reset == RESET_ADAPTER) {
+ if (qla4xxx_is_session_exists(ha, fw_ddb_entry) ==
+ QLA_SUCCESS)
+ goto continue_next_nt;
}
+
+ ret = qla4xxx_sess_conn_setup(ha, fw_ddb_entry, is_reset);
+ if (ret == QLA_ERROR)
+ goto exit_nt_list;
+
continue_next_nt:
if (next_idx == 0)
break;
}
-exit_ddb_list:
- qla4xxx_free_nt_list(&list_nt);
+
+exit_nt_list:
if (fw_ddb_entry)
dma_pool_free(ha->fw_ddb_dma_pool, fw_ddb_entry, fw_ddb_dma);
+}
+
+/**
+ * qla4xxx_build_ddb_list - Build ddb list and setup sessions
+ * @ha: pointer to adapter structure
+ * @is_reset: Is this init path or reset path
+ *
+ * Create a list of sendtargets (st) from firmware DDBs, issue send targets
+ * using connection open, then create the list of normal targets (nt)
+ * from firmware DDBs. Based on the list of nt setup session and connection
+ * objects.
+ **/
+void qla4xxx_build_ddb_list(struct scsi_qla_host *ha, int is_reset)
+{
+ uint16_t tmo = 0;
+ struct list_head list_st, list_nt;
+ struct qla_ddb_index *st_ddb_idx, *st_ddb_idx_tmp;
+ unsigned long wtime;
+
+ if (!test_bit(AF_LINK_UP, &ha->flags)) {
+ set_bit(AF_BUILD_DDB_LIST, &ha->flags);
+ ha->is_reset = is_reset;
+ return;
+ }
+
+ INIT_LIST_HEAD(&list_st);
+ INIT_LIST_HEAD(&list_nt);
+
+ qla4xxx_build_st_list(ha, &list_st);
+
+ /* Before issuing conn open mbox, ensure all IPs states are configured
+ * Note, conn open fails if IPs are not configured
+ */
+ qla4xxx_wait_for_ip_configuration(ha);
+
+ /* Go thru the STs and fire the sendtargets by issuing conn open mbx */
+ list_for_each_entry_safe(st_ddb_idx, st_ddb_idx_tmp, &list_st, list) {
+ qla4xxx_conn_open(ha, st_ddb_idx->fw_ddb_idx);
+ }
+
+ /* Wait to ensure all sendtargets are done for min 12 sec wait */
+ tmo = ((ha->def_timeout > LOGIN_TOV) &&
+ (ha->def_timeout < LOGIN_TOV * 10) ?
+ ha->def_timeout : LOGIN_TOV);
+
+ DEBUG2(ql4_printk(KERN_INFO, ha,
+ "Default time to wait for build ddb %d\n", tmo));
+
+ wtime = jiffies + (HZ * tmo);
+ do {
+ if (list_empty(&list_st))
+ break;
+
+ qla4xxx_remove_failed_ddb(ha, &list_st);
+ schedule_timeout_uninterruptible(HZ / 10);
+ } while (time_after(wtime, jiffies));
+
+ /* Free up the sendtargets list */
+ qla4xxx_free_ddb_list(&list_st);
+
+ qla4xxx_build_nt_list(ha, &list_nt, is_reset);
+
+ qla4xxx_free_ddb_list(&list_nt);
qla4xxx_free_ddb_index(ha);
}
-
/**
* qla4xxx_probe_adapter - callback function to probe HBA
* @pdev: pointer to pci_dev structure
return SUCCESS;
}
+/**
+ * qla4xxx_is_eh_active - check if error handler is running
+ * @shost: Pointer to SCSI Host struct
+ *
+ * This routine finds that if reset host is called in EH
+ * scenario or from some application like sg_reset
+ **/
+static int qla4xxx_is_eh_active(struct Scsi_Host *shost)
+{
+ if (shost->shost_state == SHOST_RECOVERY)
+ return 1;
+ return 0;
+}
+
/**
* qla4xxx_eh_host_reset - kernel callback
* @cmd: Pointer to Linux's SCSI command structure
if (ql4xdontresethba) {
DEBUG2(printk("scsi%ld: %s: Don't Reset HBA\n",
ha->host_no, __func__));
+
+ /* Clear outstanding srb in queues */
+ if (qla4xxx_is_eh_active(cmd->device->host))
+ qla4xxx_abort_active_cmds(ha, DID_ABORT << 16);
+
return FAILED;
}
projects / firefly-linux-kernel-4.4.55.git / blobdiff