#define SCSI_TIMEOUT (2*HZ)
/*
- * Prefix values for the SCSI id's (stored in driverfs name field)
+ * Prefix values for the SCSI id's (stored in sysfs name field)
*/
#define SCSI_UID_SER_NUM 'S'
#define SCSI_UID_UNKNOWN 'Z'
/**
* scsi_complete_async_scans - Wait for asynchronous scans to complete
*
- * Asynchronous scans add themselves to the scanning_hosts list. Once
- * that list is empty, we know that the scans are complete. Rather than
- * waking up periodically to check the state of the list, we pretend to be
- * a scanning task by adding ourselves at the end of the list and going to
- * sleep. When the task before us wakes us up, we take ourselves off the
- * list and return.
+ * When this function returns, any host which started scanning before
+ * this function was called will have finished its scan. Hosts which
+ * started scanning after this function was called may or may not have
+ * finished.
*/
int scsi_complete_async_scans(void)
{
spin_lock(&async_scan_lock);
list_del(&data->list);
+ if (!list_empty(&scanning_hosts)) {
+ struct async_scan_data *next = list_entry(scanning_hosts.next,
+ struct async_scan_data, list);
+ complete(&next->prev_finished);
+ }
done:
spin_unlock(&async_scan_lock);
INIT_LIST_HEAD(&starget->siblings);
INIT_LIST_HEAD(&starget->devices);
starget->state = STARGET_RUNNING;
+ starget->scsi_level = SCSI_2;
retry:
spin_lock_irqsave(shost->host_lock, flags);
* short INQUIRY), an abort here prevents any further use of the
* device, including spin up.
*
+ * On the whole, the best approach seems to be to assume the first
+ * 36 bytes are valid no matter what the device says. That's
+ * better than copying < 36 bytes to the inquiry-result buffer
+ * and displaying garbage for the Vendor, Product, or Revision
+ * strings.
+ */
+ if (sdev->inquiry_len < 36) {
+ printk(KERN_INFO "scsi scan: INQUIRY result too short (%d),"
+ " using 36\n", sdev->inquiry_len);
+ sdev->inquiry_len = 36;
+ }
+
+ /*
* Related to the above issue:
*
* XXX Devices (disk or all?) should be sent a TEST UNIT READY,
sdev->no_uld_attach = 1;
switch (sdev->type = (inq_result[0] & 0x1f)) {
+ case TYPE_RBC:
+ /* RBC devices can return SCSI-3 compliance and yet
+ * still not support REPORT LUNS, so make them act as
+ * BLIST_NOREPORTLUN unless BLIST_REPORTLUN2 is
+ * specifically set */
+ if ((*bflags & BLIST_REPORTLUN2) == 0)
+ *bflags |= BLIST_NOREPORTLUN;
+ /* fall through */
case TYPE_TAPE:
case TYPE_DISK:
case TYPE_PRINTER:
case TYPE_ENCLOSURE:
case TYPE_COMM:
case TYPE_RAID:
- case TYPE_RBC:
sdev->writeable = 1;
break;
- case TYPE_WORM:
case TYPE_ROM:
+ /* MMC devices can return SCSI-3 compliance and yet
+ * still not support REPORT LUNS, so make them act as
+ * BLIST_NOREPORTLUN unless BLIST_REPORTLUN2 is
+ * specifically set */
+ if ((*bflags & BLIST_REPORTLUN2) == 0)
+ *bflags |= BLIST_NOREPORTLUN;
+ /* fall through */
+ case TYPE_WORM:
sdev->writeable = 0;
break;
default:
sdev_printk(KERN_INFO, sdev,
"scsi scan: consider passing scsi_mod."
- "dev_flags=%s:%s:0x240 or 0x800240\n",
+ "dev_flags=%s:%s:0x240 or 0x1000240\n",
scsi_inq_str(vend, result, 8, 16),
scsi_inq_str(mod, result, 16, 32));
});
struct device *parent = &shost->shost_gendev;
struct scsi_target *starget;
+ if (strncmp(scsi_scan_type, "none", 4) == 0)
+ return ERR_PTR(-ENODEV);
+
+ if (!shost->async_scan)
+ scsi_complete_async_scans();
+
starget = scsi_alloc_target(parent, channel, id);
if (!starget)
return ERR_PTR(-ENOMEM);