* normally rely on the device being setup. Devices
* using SPI_CS_HIGH can't coexist well otherwise...
*/
- status = spi->master->setup(spi);
+ status = spi_setup(spi);
if (status < 0) {
dev_err(dev, "can't %s %s, status %d\n",
"setup", dev_name(&spi->dev), status);
/*-------------------------------------------------------------------------*/
+/* Core methods for SPI master protocol drivers. Some of the
+ * other core methods are currently defined as inline functions.
+ */
+
+/**
+ * spi_setup - setup SPI mode and clock rate
+ * @spi: the device whose settings are being modified
+ * Context: can sleep, and no requests are queued to the device
+ *
+ * SPI protocol drivers may need to update the transfer mode if the
+ * device doesn't work with its default. They may likewise need
+ * to update clock rates or word sizes from initial values. This function
+ * changes those settings, and must be called from a context that can sleep.
+ * Except for SPI_CS_HIGH, which takes effect immediately, the changes take
+ * effect the next time the device is selected and data is transferred to
+ * or from it. When this function returns, the spi device is deselected.
+ *
+ * Note that this call will fail if the protocol driver specifies an option
+ * that the underlying controller or its driver does not support. For
+ * example, not all hardware supports wire transfers using nine bit words,
+ * LSB-first wire encoding, or active-high chipselects.
+ */
+int spi_setup(struct spi_device *spi)
+{
+ int status;
+
+ if (!spi->bits_per_word)
+ spi->bits_per_word = 8;
+
+ status = spi->master->setup(spi);
+
+ dev_dbg(&spi->dev, "setup mode %d, %s%s%s%s"
+ "%u bits/w, %u Hz max --> %d\n",
+ (int) (spi->mode & (SPI_CPOL | SPI_CPHA)),
+ (spi->mode & SPI_CS_HIGH) ? "cs_high, " : "",
+ (spi->mode & SPI_LSB_FIRST) ? "lsb, " : "",
+ (spi->mode & SPI_3WIRE) ? "3wire, " : "",
+ (spi->mode & SPI_LOOP) ? "loopback, " : "",
+ spi->bits_per_word, spi->max_speed_hz,
+ status);
+
+ return status;
+}
+EXPORT_SYMBOL_GPL(spi_setup);
+
+
+/*-------------------------------------------------------------------------*/
+
+/* Utility methods for SPI master protocol drivers, layered on
+ * top of the core. Some other utility methods are defined as
+ * inline functions.
+ */
+
static void spi_complete(void *arg)
{
complete(arg);
int status;
struct spi_message message;
- struct spi_transfer x;
+ struct spi_transfer x[2];
u8 *local_buf;
/* Use preallocated DMA-safe buffer. We can't avoid copying here,
return -EINVAL;
spi_message_init(&message);
- memset(&x, 0, sizeof x);
- x.len = n_tx + n_rx;
- spi_message_add_tail(&x, &message);
+ memset(x, 0, sizeof x);
+ if (n_tx) {
+ x[0].len = n_tx;
+ spi_message_add_tail(&x[0], &message);
+ }
+ if (n_rx) {
+ x[1].len = n_rx;
+ spi_message_add_tail(&x[1], &message);
+ }
/* ... unless someone else is using the pre-allocated buffer */
if (!mutex_trylock(&lock)) {
local_buf = buf;
memcpy(local_buf, txbuf, n_tx);
- x.tx_buf = local_buf;
- x.rx_buf = local_buf;
+ x[0].tx_buf = local_buf;
+ x[1].rx_buf = local_buf + n_tx;
/* do the i/o */
status = spi_sync(spi, &message);
if (status == 0)
- memcpy(rxbuf, x.rx_buf + n_tx, n_rx);
+ memcpy(rxbuf, x[1].rx_buf, n_rx);
- if (x.tx_buf == buf)
+ if (x[0].tx_buf == buf)
mutex_unlock(&lock);
else
kfree(local_buf);