* As far as I can tell, the About interrupt doesn't work if Sample is
* also enabled. It turns out that About really isn't needed, since
* we always count down samples read.
- *
- * There was some timer/counter code, but it didn't follow the right API.
*/
/*
#include "../comedi_pci.h"
+#include "comedi_8254.h"
#include "plx9080.h"
/*
#define LAS0_DCNT 0x0054 /* Delay counter (16 bit) */
#define LAS0_ACNT 0x0058 /* About counter (16 bit) */
#define LAS0_DAC_CLK 0x005c /* DAC clock (16bit) */
-#define LAS0_UTC0 0x0060 /* 8254 TC Counter 0 */
-#define LAS0_UTC1 0x0064 /* 8254 TC Counter 1 */
-#define LAS0_UTC2 0x0068 /* 8254 TC Counter 2 */
-#define LAS0_UTC_CTRL 0x006c /* 8254 TC Control */
+#define LAS0_8254_TIMER_BASE 0x0060 /* 8254 timer/counter base */
#define LAS0_DIO0 0x0070 /* Digital I/O Port 0 */
#define LAS0_DIO1 0x0074 /* Digital I/O Port 1 */
#define LAS0_DIO0_CTRL 0x0078 /* Digital I/O Control */
#define LAS0_SBUS2_ENABLE 0x019c /* SyncBus 2 enable */
#define LAS0_ETRG_POLARITY 0x01a4 /* Ext. Trigger polarity select */
#define LAS0_EINT_POLARITY 0x01a8 /* Ext. Interrupt polarity select */
-#define LAS0_UTC0_CLOCK 0x01ac /* UTC0 Clock select */
-#define LAS0_UTC0_GATE 0x01b0 /* UTC0 Gate select */
-#define LAS0_UTC1_CLOCK 0x01b4 /* UTC1 Clock select */
-#define LAS0_UTC1_GATE 0x01b8 /* UTC1 Gate select */
-#define LAS0_UTC2_CLOCK 0x01bc /* UTC2 Clock select */
-#define LAS0_UTC2_GATE 0x01c0 /* UTC2 Gate select */
+#define LAS0_8254_CLK_SEL(x) (0x01ac + ((x) * 0x8)) /* 8254 clock select */
+#define LAS0_8254_GATE_SEL(x) (0x01b0 + ((x) * 0x8)) /* 8254 gate select */
#define LAS0_UOUT0_SELECT 0x01c4 /* User Output 0 source select */
#define LAS0_UOUT1_SELECT 0x01c8 /* User Output 1 source select */
#define LAS0_DMA0_RESET 0x01cc /* DMA0 Request state machine reset */
int xfer_count; /* # to transfer data. 0->1/2FIFO */
int flags; /* flag event modes */
unsigned fifosz;
+
+ /* 8254 Timer/Counter gate and clock sources */
+ unsigned char timer_gate_src[3];
+ unsigned char timer_clk_src[3];
};
/* bit defines for "flags" */
return insn->n;
}
+static int rtd_counter_insn_config(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned int *data)
+{
+ struct rtd_private *devpriv = dev->private;
+ unsigned int chan = CR_CHAN(insn->chanspec);
+ unsigned int max_src;
+ unsigned int src;
+
+ switch (data[0]) {
+ case INSN_CONFIG_SET_GATE_SRC:
+ /*
+ * 8254 Timer/Counter gate sources:
+ *
+ * 0 = Not gated, free running (reset state)
+ * 1 = Gated, off
+ * 2 = Ext. TC Gate 1
+ * 3 = Ext. TC Gate 2
+ * 4 = Previous TC out (chan 1 and 2 only)
+ */
+ src = data[2];
+ max_src = (chan == 0) ? 3 : 4;
+ if (src > max_src)
+ return -EINVAL;
+
+ devpriv->timer_gate_src[chan] = src;
+ writeb(src, dev->mmio + LAS0_8254_GATE_SEL(chan));
+ break;
+ case INSN_CONFIG_GET_GATE_SRC:
+ data[2] = devpriv->timer_gate_src[chan];
+ break;
+ case INSN_CONFIG_SET_CLOCK_SRC:
+ /*
+ * 8254 Timer/Counter clock sources:
+ *
+ * 0 = 8 MHz (reset state)
+ * 1 = Ext. TC Clock 1
+ * 2 = Ext. TX Clock 2
+ * 3 = Ext. Pacer Clock
+ * 4 = Previous TC out (chan 1 and 2 only)
+ * 5 = High-Speed Digital Input Sampling signal (chan 1 only)
+ */
+ src = data[1];
+ switch (chan) {
+ case 0:
+ max_src = 3;
+ break;
+ case 1:
+ max_src = 5;
+ break;
+ case 2:
+ max_src = 4;
+ break;
+ default:
+ return -EINVAL;
+ }
+ if (src > max_src)
+ return -EINVAL;
+
+ devpriv->timer_clk_src[chan] = src;
+ writeb(src, dev->mmio + LAS0_8254_CLK_SEL(chan));
+ break;
+ case INSN_CONFIG_GET_CLOCK_SRC:
+ src = devpriv->timer_clk_src[chan];
+ data[1] = devpriv->timer_clk_src[chan];
+ data[2] = (src == 0) ? RTD_CLOCK_BASE : 0;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return insn->n;
+}
+
static void rtd_reset(struct comedi_device *dev)
{
struct rtd_private *devpriv = dev->private;
writel(0, dev->mmio + LAS0_DAC_RESET(1));
/* clear digital IO fifo */
writew(0, dev->mmio + LAS0_DIO_STATUS);
- writeb((0 << 6) | 0x30, dev->mmio + LAS0_UTC_CTRL);
- writeb((1 << 6) | 0x30, dev->mmio + LAS0_UTC_CTRL);
- writeb((2 << 6) | 0x30, dev->mmio + LAS0_UTC_CTRL);
- writeb((3 << 6) | 0x00, dev->mmio + LAS0_UTC_CTRL);
/* TODO: set user out source ??? */
}
s->insn_bits = rtd_dio_insn_bits;
s->insn_config = rtd_dio_insn_config;
- /* timer/counter subdevices (not currently supported) */
+ /* 8254 Timer/Counter subdevice */
s = &dev->subdevices[3];
- s->type = COMEDI_SUBD_COUNTER;
- s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
- s->n_chan = 3;
- s->maxdata = 0xffff;
+ dev->pacer = comedi_8254_mm_init(dev->mmio + LAS0_8254_TIMER_BASE,
+ RTD_CLOCK_BASE, I8254_IO8, 2);
+ if (!dev->pacer)
+ return -ENOMEM;
+
+ comedi_8254_subdevice_init(s, dev->pacer);
+ dev->pacer->insn_config = rtd_counter_insn_config;
rtd_init_board(dev);
projects / firefly-linux-kernel-4.4.55.git / blobdiff