void hal_set_rates(phw_data_t pHwData, u8 *pbss_rates,
u8 length, unsigned char basic_rate_set)
{
- PWB35REG pWb35Reg = &pHwData->Wb35Reg;
+ struct wb35_reg *reg = &pHwData->reg;
u32 tmp, tmp1;
u8 Rate[12]={ 2, 4, 11, 22, 12, 18, 24, 36, 48, 72, 96, 108 };
u8 SupportedRate[16];
if( pHwData->SurpriseRemove ) return;
if (basic_rate_set) {
- pWb35Reg->M28_MacControl &= ~0x000fff00;
+ reg->M28_MacControl &= ~0x000fff00;
tmp1 = 0x00000100;
} else {
- pWb35Reg->M28_MacControl &= ~0xfff00000;
+ reg->M28_MacControl &= ~0xfff00000;
tmp1 = 0x00100000;
}
tmp |= (tmp1<<j);
}
- pWb35Reg->M28_MacControl |= tmp;
- Wb35Reg_Write( pHwData, 0x0828, pWb35Reg->M28_MacControl );
+ reg->M28_MacControl |= tmp;
+ Wb35Reg_Write( pHwData, 0x0828, reg->M28_MacControl );
// 930206.2.c M78 setting
j = k = Count1 = Count2 = 0;
tmp = 0x00100000;
tmp1 = 0x00000100;
for (i=0; i<12; i++) { // Get the supported rate
- if (tmp & pWb35Reg->M28_MacControl) {
+ if (tmp & reg->M28_MacControl) {
SupportedRate[j] = Rate[i];
- if (tmp1 & pWb35Reg->M28_MacControl)
+ if (tmp1 & reg->M28_MacControl)
SupportedRate[j] |= 0x80;
if (k)
}
if (i==4 && k==0) {
- if( !(pWb35Reg->M28_MacControl & 0x000ff000) ) // if basic rate in 11g domain)
+ if( !(reg->M28_MacControl & 0x000ff000) ) // if basic rate in 11g domain)
{
k = 1;
j = 8;
*(u32 *)(SupportedRate+(i<<2)) = cpu_to_le32( *(u32 *)(SupportedRate+(i<<2)) );
//--- end 20060926 add by anson's endian
Wb35Reg_BurstWrite( pHwData,0x087c, (u32 *)SupportedRate, 4, AUTO_INCREMENT );
- pWb35Reg->M7C_MacControl = ((u32 *)SupportedRate)[0];
- pWb35Reg->M80_MacControl = ((u32 *)SupportedRate)[1];
- pWb35Reg->M84_MacControl = ((u32 *)SupportedRate)[2];
- pWb35Reg->M88_MacControl = ((u32 *)SupportedRate)[3];
+ reg->M7C_MacControl = ((u32 *)SupportedRate)[0];
+ reg->M80_MacControl = ((u32 *)SupportedRate)[1];
+ reg->M84_MacControl = ((u32 *)SupportedRate)[2];
+ reg->M88_MacControl = ((u32 *)SupportedRate)[3];
// Fill length
tmp = Count1<<28 | Count2<<24;
- pWb35Reg->M78_ERPInformation &= ~0xff000000;
- pWb35Reg->M78_ERPInformation |= tmp;
- Wb35Reg_Write( pHwData, 0x0878, pWb35Reg->M78_ERPInformation );
+ reg->M78_ERPInformation &= ~0xff000000;
+ reg->M78_ERPInformation |= tmp;
+ Wb35Reg_Write( pHwData, 0x0878, reg->M78_ERPInformation );
}
void hal_set_current_channel_ex( phw_data_t pHwData, ChanInfo channel )
{
- PWB35REG pWb35Reg = &pHwData->Wb35Reg;
+ struct wb35_reg *reg = &pHwData->reg;
if( pHwData->SurpriseRemove )
return;
#ifdef _PE_STATE_DUMP_
WBDEBUG(("Set channel is %d, band =%d\n", pHwData->Channel, pHwData->band));
#endif
- pWb35Reg->M28_MacControl &= ~0xff; // Clean channel information field
- pWb35Reg->M28_MacControl |= channel.ChanNo;
- Wb35Reg_WriteWithCallbackValue( pHwData, 0x0828, pWb35Reg->M28_MacControl,
+ reg->M28_MacControl &= ~0xff; // Clean channel information field
+ reg->M28_MacControl |= channel.ChanNo;
+ Wb35Reg_WriteWithCallbackValue( pHwData, 0x0828, reg->M28_MacControl,
(s8 *)&channel, sizeof(ChanInfo));
}
//---------------------------------------------------------------------------------------------------
//---------------------------------------------------------------------------------------------------
void hal_set_accept_broadcast( phw_data_t pHwData, u8 enable )
{
- PWB35REG pWb35Reg = &pHwData->Wb35Reg;
+ struct wb35_reg *reg = &pHwData->reg;
if( pHwData->SurpriseRemove ) return;
- pWb35Reg->M00_MacControl &= ~0x02000000;//The HW value
+ reg->M00_MacControl &= ~0x02000000;//The HW value
if (enable)
- pWb35Reg->M00_MacControl |= 0x02000000;//The HW value
+ reg->M00_MacControl |= 0x02000000;//The HW value
- Wb35Reg_Write( pHwData, 0x0800, pWb35Reg->M00_MacControl );
+ Wb35Reg_Write( pHwData, 0x0800, reg->M00_MacControl );
}
//for wep key error detection, we need to accept broadcast packets to be received temporary.
void hal_set_accept_promiscuous( phw_data_t pHwData, u8 enable)
{
- PWB35REG pWb35Reg = &pHwData->Wb35Reg;
+ struct wb35_reg *reg = &pHwData->reg;
if (pHwData->SurpriseRemove) return;
if (enable) {
- pWb35Reg->M00_MacControl |= 0x00400000;
- Wb35Reg_Write( pHwData, 0x0800, pWb35Reg->M00_MacControl );
+ reg->M00_MacControl |= 0x00400000;
+ Wb35Reg_Write( pHwData, 0x0800, reg->M00_MacControl );
} else {
- pWb35Reg->M00_MacControl&=~0x00400000;
- Wb35Reg_Write( pHwData, 0x0800, pWb35Reg->M00_MacControl );
+ reg->M00_MacControl&=~0x00400000;
+ Wb35Reg_Write( pHwData, 0x0800, reg->M00_MacControl );
}
}
void hal_set_accept_multicast( phw_data_t pHwData, u8 enable )
{
- PWB35REG pWb35Reg = &pHwData->Wb35Reg;
+ struct wb35_reg *reg = &pHwData->reg;
if( pHwData->SurpriseRemove ) return;
- pWb35Reg->M00_MacControl &= ~0x01000000;//The HW value
- if (enable) pWb35Reg->M00_MacControl |= 0x01000000;//The HW value
- Wb35Reg_Write( pHwData, 0x0800, pWb35Reg->M00_MacControl );
+ reg->M00_MacControl &= ~0x01000000;//The HW value
+ if (enable) reg->M00_MacControl |= 0x01000000;//The HW value
+ Wb35Reg_Write( pHwData, 0x0800, reg->M00_MacControl );
}
void hal_set_accept_beacon( phw_data_t pHwData, u8 enable )
{
- PWB35REG pWb35Reg = &pHwData->Wb35Reg;
+ struct wb35_reg *reg = &pHwData->reg;
if( pHwData->SurpriseRemove ) return;
if( !enable )//Due to SME and MLME are not suitable for 35
return;
- pWb35Reg->M00_MacControl &= ~0x04000000;//The HW value
+ reg->M00_MacControl &= ~0x04000000;//The HW value
if( enable )
- pWb35Reg->M00_MacControl |= 0x04000000;//The HW value
+ reg->M00_MacControl |= 0x04000000;//The HW value
- Wb35Reg_Write( pHwData, 0x0800, pWb35Reg->M00_MacControl );
+ Wb35Reg_Write( pHwData, 0x0800, reg->M00_MacControl );
}
//---------------------------------------------------------------------------------------------------
void hal_set_multicast_address( phw_data_t pHwData, u8 *address, u8 number )
{
- PWB35REG pWb35Reg = &pHwData->Wb35Reg;
+ struct wb35_reg *reg = &pHwData->reg;
u8 Byte, Bit;
if( pHwData->SurpriseRemove ) return;
//Erases and refills the card multicast registers. Used when an address
// has been deleted and all bits must be recomputed.
- pWb35Reg->M04_MulticastAddress1 = 0;
- pWb35Reg->M08_MulticastAddress2 = 0;
+ reg->M04_MulticastAddress1 = 0;
+ reg->M08_MulticastAddress2 = 0;
while( number )
{
number--;
CardGetMulticastBit( (address+(number*ETH_LENGTH_OF_ADDRESS)), &Byte, &Bit);
- pWb35Reg->Multicast[Byte] |= Bit;
+ reg->Multicast[Byte] |= Bit;
}
// Updating register
- Wb35Reg_BurstWrite( pHwData, 0x0804, (u32 *)pWb35Reg->Multicast, 2, AUTO_INCREMENT );
+ Wb35Reg_BurstWrite( pHwData, 0x0804, (u32 *)reg->Multicast, 2, AUTO_INCREMENT );
}
//---------------------------------------------------------------------------------------------------
u8 hal_get_accept_beacon( phw_data_t pHwData )
{
- PWB35REG pWb35Reg = &pHwData->Wb35Reg;
+ struct wb35_reg *reg = &pHwData->reg;
if( pHwData->SurpriseRemove ) return 0;
- if( pWb35Reg->M00_MacControl & 0x04000000 )
+ if( reg->M00_MacControl & 0x04000000 )
return 1;
else
return 0;
void hal_stop( phw_data_t pHwData )
{
- PWB35REG pWb35Reg = &pHwData->Wb35Reg;
+ struct wb35_reg *reg = &pHwData->reg;
pHwData->Wb35Rx.rx_halt = 1;
Wb35Rx_stop( pHwData );
pHwData->Wb35Tx.tx_halt = 1;
Wb35Tx_stop( pHwData );
- pWb35Reg->D00_DmaControl &= ~0xc0000000;//Tx Off, Rx Off
- Wb35Reg_Write( pHwData, 0x0400, pWb35Reg->D00_DmaControl );
+ reg->D00_DmaControl &= ~0xc0000000;//Tx Off, Rx Off
+ Wb35Reg_Write( pHwData, 0x0400, reg->D00_DmaControl );
WbUsb_Stop( pHwData ); // 20051230 Add.4
}
unsigned char hal_idle(phw_data_t pHwData)
{
- PWB35REG pWb35Reg = &pHwData->Wb35Reg;
+ struct wb35_reg *reg = &pHwData->reg;
PWBUSB pWbUsb = &pHwData->WbUsb;
- if( !pHwData->SurpriseRemove && ( pWbUsb->DetectCount || pWb35Reg->EP0vm_state!=VM_STOP ) )
+ if( !pHwData->SurpriseRemove && ( pWbUsb->DetectCount || reg->EP0vm_state!=VM_STOP ) )
return FALSE;
return TRUE;
//---------------------------------------------------------------------------------------------------
void hal_set_cwmin( phw_data_t pHwData, u8 cwin_min )
{
- PWB35REG pWb35Reg = &pHwData->Wb35Reg;
+ struct wb35_reg *reg = &pHwData->reg;
if( pHwData->SurpriseRemove ) return;
pHwData->cwmin = cwin_min;
- pWb35Reg->M2C_MacControl &= ~0x7c00; //bit 10 ~ 14
- pWb35Reg->M2C_MacControl |= (pHwData->cwmin<<10);
- Wb35Reg_Write( pHwData, 0x082c, pWb35Reg->M2C_MacControl );
+ reg->M2C_MacControl &= ~0x7c00; //bit 10 ~ 14
+ reg->M2C_MacControl |= (pHwData->cwmin<<10);
+ Wb35Reg_Write( pHwData, 0x082c, reg->M2C_MacControl );
}
s32 hal_get_rssi( phw_data_t pHwData, u32 *HalRssiArry, u8 Count )
{
- PWB35REG pWb35Reg = &pHwData->Wb35Reg;
+ struct wb35_reg *reg = &pHwData->reg;
R01_DESCRIPTOR r01;
s32 ltmp = 0, tmp;
u8 i;
for (i=0; i<Count; i++)
{
r01.value = HalRssiArry[i];
- tmp = ((( r01.R01_AGC_state + pWb35Reg->LNAValue[r01.R01_LNA_state]) * 85 ) >>7 ) - 195;
+ tmp = ((( r01.R01_AGC_state + reg->LNAValue[r01.R01_LNA_state]) * 85 ) >>7 ) - 195;
ltmp += tmp;
}
ltmp /= Count;
//----------------------------------------------------------------------------------------------------
s32 hal_get_rssi_bss( phw_data_t pHwData, u16 idx, u8 Count )
{
- PWB35REG pWb35Reg = &pHwData->Wb35Reg;
+ struct wb35_reg *reg = &pHwData->reg;
R01_DESCRIPTOR r01;
s32 ltmp = 0, tmp;
u8 i, j;
for (i=0; i<Count; i++)
{
r01.value = HalRssiArry[i];
- tmp = ((( r01.R01_AGC_state + pWb35Reg->LNAValue[r01.R01_LNA_state]) * 85 ) >>7 ) - 195;
+ tmp = ((( r01.R01_AGC_state + reg->LNAValue[r01.R01_LNA_state]) * 85 ) >>7 ) - 195;
ltmp += tmp;
}
#else
for (i=0; i<Count; i++)
{
r01.value = psBSS(idx)->HalRssi[j];
- tmp = ((( r01.R01_AGC_state + pWb35Reg->LNAValue[r01.R01_LNA_state]) * 85 ) >>7 ) - 195;
+ tmp = ((( r01.R01_AGC_state + reg->LNAValue[r01.R01_LNA_state]) * 85 ) >>7 ) - 195;
ltmp += tmp;
if (j == 0)
{
void hal_led_control( void* S1, phw_data_t pHwData, void* S3, void* S4 )
{
PADAPTER Adapter = pHwData->Adapter;
- PWB35REG pWb35Reg = &pHwData->Wb35Reg;
+ struct wb35_reg *reg = &pHwData->reg;
u32 LEDSet = (pHwData->SoftwareSet & HAL_LED_SET_MASK) >> HAL_LED_SET_SHIFT;
u8 LEDgray[20] = { 0,3,4,6,8,10,11,12,13,14,15,14,13,12,11,10,8,6,4,2 };
u8 LEDgray2[30] = { 7,8,9,10,11,12,13,14,15,0,0,0,0,0,0,0,0,0,0,0,0,0,15,14,13,12,11,10,9,8 };
}
pHwData->LED_Blinking++;
- pWb35Reg->U1BC_LEDConfigure = ltmp;
+ reg->U1BC_LEDConfigure = ltmp;
if( LEDSet != 7 ) // Only 111 mode has 2 LEDs on PCB.
{
- pWb35Reg->U1BC_LEDConfigure |= (ltmp &0xff)<<8; // Copy LED result to each LED control register
- pWb35Reg->U1BC_LEDConfigure |= (ltmp &0xff00)>>8;
+ reg->U1BC_LEDConfigure |= (ltmp &0xff)<<8; // Copy LED result to each LED control register
+ reg->U1BC_LEDConfigure |= (ltmp &0xff00)>>8;
}
- Wb35Reg_Write( pHwData, 0x03bc, pWb35Reg->U1BC_LEDConfigure );
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
}
}
else if( pHwData->CurrentRadioSw || pHwData->CurrentRadioHw ) // If radio off
{
- if( pWb35Reg->U1BC_LEDConfigure & 0x1010 )
+ if( reg->U1BC_LEDConfigure & 0x1010 )
{
- pWb35Reg->U1BC_LEDConfigure &= ~0x1010;
- Wb35Reg_Write( pHwData, 0x03bc, pWb35Reg->U1BC_LEDConfigure );
+ reg->U1BC_LEDConfigure &= ~0x1010;
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
}
}
else
{
if( pHwData->LED_Blinking == 0 )
{
- pWb35Reg->U1BC_LEDConfigure |= 0x10;
- Wb35Reg_Write( pHwData, 0x03bc, pWb35Reg->U1BC_LEDConfigure ); // LED_0 On
+ reg->U1BC_LEDConfigure |= 0x10;
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 On
pHwData->LED_Blinking = 1;
TimeInterval = 300;
}
else
{
- pWb35Reg->U1BC_LEDConfigure &= ~0x10;
- Wb35Reg_Write( pHwData, 0x03bc, pWb35Reg->U1BC_LEDConfigure ); // LED_0 Off
+ reg->U1BC_LEDConfigure &= ~0x10;
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
pHwData->LED_Blinking = 0;
TimeInterval = 300;
}
else
{
//Turn Off LED_0
- if( pWb35Reg->U1BC_LEDConfigure & 0x10 )
+ if( reg->U1BC_LEDConfigure & 0x10 )
{
- pWb35Reg->U1BC_LEDConfigure &= ~0x10;
- Wb35Reg_Write( pHwData, 0x03bc, pWb35Reg->U1BC_LEDConfigure ); // LED_0 Off
+ reg->U1BC_LEDConfigure &= ~0x10;
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
}
}
}
else
{
// Turn On LED_0
- if( (pWb35Reg->U1BC_LEDConfigure & 0x10) == 0 )
+ if( (reg->U1BC_LEDConfigure & 0x10) == 0 )
{
- pWb35Reg->U1BC_LEDConfigure |= 0x10;
- Wb35Reg_Write( pHwData, 0x03bc, pWb35Reg->U1BC_LEDConfigure ); // LED_0 Off
+ reg->U1BC_LEDConfigure |= 0x10;
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
}
}
break;
{
if( pHwData->LED_Blinking == 0 )
{
- pWb35Reg->U1BC_LEDConfigure &= ~0xf;
- pWb35Reg->U1BC_LEDConfigure |= 0x10;
- Wb35Reg_Write( pHwData, 0x03bc, pWb35Reg->U1BC_LEDConfigure ); // LED_0 On
+ reg->U1BC_LEDConfigure &= ~0xf;
+ reg->U1BC_LEDConfigure |= 0x10;
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 On
pHwData->LED_Blinking = 1;
TimeInterval = 300;
}
else
{
- pWb35Reg->U1BC_LEDConfigure &= ~0x1f;
- Wb35Reg_Write( pHwData, 0x03bc, pWb35Reg->U1BC_LEDConfigure ); // LED_0 Off
+ reg->U1BC_LEDConfigure &= ~0x1f;
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
pHwData->LED_Blinking = 0;
TimeInterval = 300;
}
else
{
// 20060901 Gray blinking if in disconnect state and not scanning
- ltmp = pWb35Reg->U1BC_LEDConfigure;
- pWb35Reg->U1BC_LEDConfigure &= ~0x1f;
+ ltmp = reg->U1BC_LEDConfigure;
+ reg->U1BC_LEDConfigure &= ~0x1f;
if( LEDgray2[(pHwData->LED_Blinking%30)] )
{
- pWb35Reg->U1BC_LEDConfigure |= 0x10;
- pWb35Reg->U1BC_LEDConfigure |= LEDgray2[ (pHwData->LED_Blinking%30) ];
+ reg->U1BC_LEDConfigure |= 0x10;
+ reg->U1BC_LEDConfigure |= LEDgray2[ (pHwData->LED_Blinking%30) ];
}
pHwData->LED_Blinking++;
- if( pWb35Reg->U1BC_LEDConfigure != ltmp )
- Wb35Reg_Write( pHwData, 0x03bc, pWb35Reg->U1BC_LEDConfigure ); // LED_0 Off
+ if( reg->U1BC_LEDConfigure != ltmp )
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
TimeInterval = 100;
}
}
else
{
// Turn On LED_0
- if( (pWb35Reg->U1BC_LEDConfigure & 0x10) == 0 )
+ if( (reg->U1BC_LEDConfigure & 0x10) == 0 )
{
- pWb35Reg->U1BC_LEDConfigure |= 0x10;
- Wb35Reg_Write( pHwData, 0x03bc, pWb35Reg->U1BC_LEDConfigure ); // LED_0 Off
+ reg->U1BC_LEDConfigure |= 0x10;
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
}
}
break;
{
if( pHwData->LED_Blinking == 0 )
{
- pWb35Reg->U1BC_LEDConfigure |= 0x1000;
- Wb35Reg_Write( pHwData, 0x03bc, pWb35Reg->U1BC_LEDConfigure ); // LED_1 On
+ reg->U1BC_LEDConfigure |= 0x1000;
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 On
pHwData->LED_Blinking = 1;
TimeInterval = 300;
}
else
{
- pWb35Reg->U1BC_LEDConfigure &= ~0x1000;
- Wb35Reg_Write( pHwData, 0x03bc, pWb35Reg->U1BC_LEDConfigure ); // LED_1 Off
+ reg->U1BC_LEDConfigure &= ~0x1000;
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 Off
pHwData->LED_Blinking = 0;
TimeInterval = 300;
}
else
{
//Turn Off LED_1
- if( pWb35Reg->U1BC_LEDConfigure & 0x1000 )
+ if( reg->U1BC_LEDConfigure & 0x1000 )
{
- pWb35Reg->U1BC_LEDConfigure &= ~0x1000;
- Wb35Reg_Write( pHwData, 0x03bc, pWb35Reg->U1BC_LEDConfigure ); // LED_1 Off
+ reg->U1BC_LEDConfigure &= ~0x1000;
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 Off
}
}
}
if( (OS_CURRENT_RX_BYTE( Adapter ) != pHwData->RxByteCountLast ) ||
(OS_CURRENT_TX_BYTE( Adapter ) != pHwData->TxByteCountLast ) )
{
- if( (pWb35Reg->U1BC_LEDConfigure & 0x3000) != 0x3000 )
+ if( (reg->U1BC_LEDConfigure & 0x3000) != 0x3000 )
{
- pWb35Reg->U1BC_LEDConfigure |= 0x3000;
- Wb35Reg_Write( pHwData, 0x03bc, pWb35Reg->U1BC_LEDConfigure ); // LED_1 On
+ reg->U1BC_LEDConfigure |= 0x3000;
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 On
}
// Update variable
else
{
// Turn On LED_1 and blinking if transmitting/receiving
- if( (pWb35Reg->U1BC_LEDConfigure & 0x3000) != 0x1000 )
+ if( (reg->U1BC_LEDConfigure & 0x3000) != 0x1000 )
{
- pWb35Reg->U1BC_LEDConfigure &= ~0x3000;
- pWb35Reg->U1BC_LEDConfigure |= 0x1000;
- Wb35Reg_Write( pHwData, 0x03bc, pWb35Reg->U1BC_LEDConfigure ); // LED_1 On
+ reg->U1BC_LEDConfigure &= ~0x3000;
+ reg->U1BC_LEDConfigure |= 0x1000;
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 On
}
}
}
break;
default: // Default setting. 2 LED be placed on PCB. LED_0: Link On LED_1 Active
- if( (pWb35Reg->U1BC_LEDConfigure & 0x3000) != 0x3000 )
+ if( (reg->U1BC_LEDConfigure & 0x3000) != 0x3000 )
{
- pWb35Reg->U1BC_LEDConfigure |= 0x3000;// LED_1 is always on and event enable
- Wb35Reg_Write( pHwData, 0x03bc, pWb35Reg->U1BC_LEDConfigure );
+ reg->U1BC_LEDConfigure |= 0x3000;// LED_1 is always on and event enable
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
}
if( pHwData->LED_Blinking )
{
// Gray blinking
- pWb35Reg->U1BC_LEDConfigure &= ~0x0f;
- pWb35Reg->U1BC_LEDConfigure |= 0x10;
- pWb35Reg->U1BC_LEDConfigure |= LEDgray[ (pHwData->LED_Blinking-1)%20 ];
- Wb35Reg_Write( pHwData, 0x03bc, pWb35Reg->U1BC_LEDConfigure );
+ reg->U1BC_LEDConfigure &= ~0x0f;
+ reg->U1BC_LEDConfigure |= 0x10;
+ reg->U1BC_LEDConfigure |= LEDgray[ (pHwData->LED_Blinking-1)%20 ];
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
pHwData->LED_Blinking += 2;
if( pHwData->LED_Blinking < 40 )
else
{
pHwData->LED_Blinking = 0; // Stop blinking
- pWb35Reg->U1BC_LEDConfigure &= ~0x0f;
- Wb35Reg_Write( pHwData, 0x03bc, pWb35Reg->U1BC_LEDConfigure );
+ reg->U1BC_LEDConfigure &= ~0x0f;
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
}
break;
}
if( pHwData->LED_LinkOn )
{
- if( !(pWb35Reg->U1BC_LEDConfigure & 0x10) ) // Check the LED_0
+ if( !(reg->U1BC_LEDConfigure & 0x10) ) // Check the LED_0
{
//Try to turn ON LED_0 after gray blinking
- pWb35Reg->U1BC_LEDConfigure |= 0x10;
+ reg->U1BC_LEDConfigure |= 0x10;
pHwData->LED_Blinking = 1; //Start blinking
TimeInterval = 50;
}
}
else
{
- if( pWb35Reg->U1BC_LEDConfigure & 0x10 ) // Check the LED_0
+ if( reg->U1BC_LEDConfigure & 0x10 ) // Check the LED_0
{
- pWb35Reg->U1BC_LEDConfigure &= ~0x10;
- Wb35Reg_Write( pHwData, 0x03bc, pWb35Reg->U1BC_LEDConfigure );
+ reg->U1BC_LEDConfigure &= ~0x10;
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
}
}
break;
void hal_set_radio_mode( phw_data_t pHwData, unsigned char radio_off)
{
- PWB35REG pWb35Reg = &pHwData->Wb35Reg;
+ struct wb35_reg *reg = &pHwData->reg;
if( pHwData->SurpriseRemove ) return;
if (radio_off) //disable Baseband receive off
{
pHwData->CurrentRadioSw = 1; // off
- pWb35Reg->M24_MacControl &= 0xffffffbf;
+ reg->M24_MacControl &= 0xffffffbf;
}
else
{
pHwData->CurrentRadioSw = 0; // on
- pWb35Reg->M24_MacControl |= 0x00000040;
+ reg->M24_MacControl |= 0x00000040;
}
- Wb35Reg_Write( pHwData, 0x0824, pWb35Reg->M24_MacControl );
+ Wb35Reg_Write( pHwData, 0x0824, reg->M24_MacControl );
}
u8 hal_get_antenna_number( phw_data_t pHwData )
{
- PWB35REG pWb35Reg = &pHwData->Wb35Reg;
+ struct wb35_reg *reg = &pHwData->reg;
- if ((pWb35Reg->BB2C & BIT(11)) == 0)
+ if ((reg->BB2C & BIT(11)) == 0)
return 0;
else
return 1;
void hal_set_antenna_number( phw_data_t pHwData, u8 number )
{
- PWB35REG pWb35Reg = &pHwData->Wb35Reg;
+ struct wb35_reg *reg = &pHwData->reg;
if (number == 1) {
- pWb35Reg->BB2C |= BIT(11);
+ reg->BB2C |= BIT(11);
} else {
- pWb35Reg->BB2C &= ~BIT(11);
+ reg->BB2C &= ~BIT(11);
}
- Wb35Reg_Write( pHwData, 0x102c, pWb35Reg->BB2C );
+ Wb35Reg_Write( pHwData, 0x102c, reg->BB2C );
#ifdef _PE_STATE_DUMP_
WBDEBUG(("Current antenna number : %d\n", number));
#endif
//0 : radio on; 1: radio off
u8 hal_get_hw_radio_off( phw_data_t pHwData )
{
- PWB35REG pWb35Reg = &pHwData->Wb35Reg;
+ struct wb35_reg *reg = &pHwData->reg;
if( pHwData->SurpriseRemove ) return 1;
//read the bit16 of register U1B0
- Wb35Reg_Read( pHwData, 0x3b0, &pWb35Reg->U1B0 );
- if ((pWb35Reg->U1B0 & 0x00010000)) {
+ Wb35Reg_Read( pHwData, 0x3b0, ®->U1B0 );
+ if ((reg->U1B0 & 0x00010000)) {
pHwData->CurrentRadioHw = 1;
return 1;
} else {
projects / firefly-linux-kernel-4.4.55.git / blobdiff