#include <linux/utsname.h>
#include <linux/mm.h>
#include <asm/io.h>
-#include <asm/scatterlist.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/mutex.h>
#include <asm/irq.h>
#include <asm/byteorder.h>
+#include <asm/unaligned.h>
#include <linux/platform_device.h>
#include <linux/workqueue.h>
0x01, /* __u8 bDeviceProtocol; [ usb 2.0 single TT ]*/
0x40, /* __u8 bMaxPacketSize0; 64 Bytes */
- 0x00, 0x00, /* __le16 idVendor; */
- 0x00, 0x00, /* __le16 idProduct; */
+ 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation */
+ 0x02, 0x00, /* __le16 idProduct; device 0x0002 */
KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
0x03, /* __u8 iManufacturer; */
0x00, /* __u8 bDeviceProtocol; [ low/full speeds only ] */
0x40, /* __u8 bMaxPacketSize0; 64 Bytes */
- 0x00, 0x00, /* __le16 idVendor; */
- 0x00, 0x00, /* __le16 idProduct; */
+ 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation */
+ 0x01, 0x00, /* __le16 idProduct; device 0x0001 */
KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
0x03, /* __u8 iManufacturer; */
* rh_string - provides manufacturer, product and serial strings for root hub
* @id: the string ID number (1: serial number, 2: product, 3: vendor)
* @hcd: the host controller for this root hub
- * @type: string describing our driver
* @data: return packet in UTF-16 LE
* @len: length of the return packet
*
/* any errors get returned through the urb completion */
spin_lock_irq(&hcd_root_hub_lock);
- if (urb->status == -EINPROGRESS)
- urb->status = status;
usb_hcd_unlink_urb_from_ep(hcd, urb);
/* This peculiar use of spinlocks echoes what real HC drivers do.
* RT-friendly.
*/
spin_unlock(&hcd_root_hub_lock);
- usb_hcd_giveback_urb(hcd, urb);
+ usb_hcd_giveback_urb(hcd, urb, status);
spin_lock(&hcd_root_hub_lock);
spin_unlock_irq(&hcd_root_hub_lock);
if (urb) {
hcd->poll_pending = 0;
hcd->status_urb = NULL;
- urb->status = 0;
urb->actual_length = length;
memcpy(urb->transfer_buffer, buffer, length);
usb_hcd_unlink_urb_from_ep(hcd, urb);
spin_unlock(&hcd_root_hub_lock);
- usb_hcd_giveback_urb(hcd, urb);
+ usb_hcd_giveback_urb(hcd, urb, 0);
spin_lock(&hcd_root_hub_lock);
} else {
length = 0;
usb_hcd_unlink_urb_from_ep(hcd, urb);
spin_unlock(&hcd_root_hub_lock);
- usb_hcd_giveback_urb(hcd, urb);
+ usb_hcd_giveback_urb(hcd, urb, status);
spin_lock(&hcd_root_hub_lock);
}
}
}
set_bit (busnum, busmap.busmap);
bus->busnum = busnum;
- bus->class_dev = class_device_create(usb_host_class, NULL, MKDEV(0,0),
- bus->controller, "usb_host%d",
- busnum);
- result = PTR_ERR(bus->class_dev);
- if (IS_ERR(bus->class_dev))
+
+ bus->dev = device_create(usb_host_class, bus->controller, MKDEV(0, 0),
+ "usb_host%d", busnum);
+ result = PTR_ERR(bus->dev);
+ if (IS_ERR(bus->dev))
goto error_create_class_dev;
- class_set_devdata(bus->class_dev, bus);
+ dev_set_drvdata(bus->dev, bus);
/* Add it to the local list of buses */
list_add (&bus->bus_list, &usb_bus_list);
clear_bit (bus->busnum, busmap.busmap);
- class_device_unregister(bus->class_dev);
+ device_unregister(bus->dev);
}
/**
return -1;
}
}
-EXPORT_SYMBOL (usb_calc_bus_time);
+EXPORT_SYMBOL_GPL(usb_calc_bus_time);
/*-------------------------------------------------------------------------*/
goto done;
}
+ if (unlikely(!urb->dev->can_submit)) {
+ rc = -EHOSTUNREACH;
+ goto done;
+ }
+
/*
* Check the host controller's state and add the URB to the
* endpoint's queue.
switch (hcd->state) {
case HC_STATE_RUNNING:
case HC_STATE_RESUMING:
+ urb->unlinked = 0;
list_add_tail(&urb->urb_list, &urb->ep->urb_list);
break;
default:
/* Any status except -EINPROGRESS means something already started to
* unlink this URB from the hardware. So there's no more work to do.
*/
- if (urb->status != -EINPROGRESS)
+ if (urb->unlinked)
return -EBUSY;
- urb->status = status;
+ urb->unlinked = status;
/* IRQ setup can easily be broken so that USB controllers
* never get completion IRQs ... maybe even the ones we need to
}
EXPORT_SYMBOL_GPL(usb_hcd_unlink_urb_from_ep);
-static void map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
+/*
+ * Some usb host controllers can only perform dma using a small SRAM area.
+ * The usb core itself is however optimized for host controllers that can dma
+ * using regular system memory - like pci devices doing bus mastering.
+ *
+ * To support host controllers with limited dma capabilites we provide dma
+ * bounce buffers. This feature can be enabled using the HCD_LOCAL_MEM flag.
+ * For this to work properly the host controller code must first use the
+ * function dma_declare_coherent_memory() to point out which memory area
+ * that should be used for dma allocations.
+ *
+ * The HCD_LOCAL_MEM flag then tells the usb code to allocate all data for
+ * dma using dma_alloc_coherent() which in turn allocates from the memory
+ * area pointed out with dma_declare_coherent_memory().
+ *
+ * So, to summarize...
+ *
+ * - We need "local" memory, canonical example being
+ * a small SRAM on a discrete controller being the
+ * only memory that the controller can read ...
+ * (a) "normal" kernel memory is no good, and
+ * (b) there's not enough to share
+ *
+ * - The only *portable* hook for such stuff in the
+ * DMA framework is dma_declare_coherent_memory()
+ *
+ * - So we use that, even though the primary requirement
+ * is that the memory be "local" (hence addressible
+ * by that device), not "coherent".
+ *
+ */
+
+static int hcd_alloc_coherent(struct usb_bus *bus,
+ gfp_t mem_flags, dma_addr_t *dma_handle,
+ void **vaddr_handle, size_t size,
+ enum dma_data_direction dir)
{
+ unsigned char *vaddr;
+
+ vaddr = hcd_buffer_alloc(bus, size + sizeof(vaddr),
+ mem_flags, dma_handle);
+ if (!vaddr)
+ return -ENOMEM;
+
+ /*
+ * Store the virtual address of the buffer at the end
+ * of the allocated dma buffer. The size of the buffer
+ * may be uneven so use unaligned functions instead
+ * of just rounding up. It makes sense to optimize for
+ * memory footprint over access speed since the amount
+ * of memory available for dma may be limited.
+ */
+ put_unaligned((unsigned long)*vaddr_handle,
+ (unsigned long *)(vaddr + size));
+
+ if (dir == DMA_TO_DEVICE)
+ memcpy(vaddr, *vaddr_handle, size);
+
+ *vaddr_handle = vaddr;
+ return 0;
+}
+
+static void hcd_free_coherent(struct usb_bus *bus, dma_addr_t *dma_handle,
+ void **vaddr_handle, size_t size,
+ enum dma_data_direction dir)
+{
+ unsigned char *vaddr = *vaddr_handle;
+
+ vaddr = (void *)get_unaligned((unsigned long *)(vaddr + size));
+
+ if (dir == DMA_FROM_DEVICE)
+ memcpy(vaddr, *vaddr_handle, size);
+
+ hcd_buffer_free(bus, size + sizeof(vaddr), *vaddr_handle, *dma_handle);
+
+ *vaddr_handle = vaddr;
+ *dma_handle = 0;
+}
+
+static int map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
+ gfp_t mem_flags)
+{
+ enum dma_data_direction dir;
+ int ret = 0;
+
/* Map the URB's buffers for DMA access.
* Lower level HCD code should use *_dma exclusively,
* unless it uses pio or talks to another transport.
*/
- if (hcd->self.uses_dma && !is_root_hub(urb->dev)) {
- if (usb_endpoint_xfer_control(&urb->ep->desc)
- && !(urb->transfer_flags & URB_NO_SETUP_DMA_MAP))
- urb->setup_dma = dma_map_single (
+ if (is_root_hub(urb->dev))
+ return 0;
+
+ if (usb_endpoint_xfer_control(&urb->ep->desc)
+ && !(urb->transfer_flags & URB_NO_SETUP_DMA_MAP)) {
+ if (hcd->self.uses_dma)
+ urb->setup_dma = dma_map_single(
hcd->self.controller,
urb->setup_packet,
- sizeof (struct usb_ctrlrequest),
+ sizeof(struct usb_ctrlrequest),
DMA_TO_DEVICE);
- if (urb->transfer_buffer_length != 0
- && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP))
+ else if (hcd->driver->flags & HCD_LOCAL_MEM)
+ ret = hcd_alloc_coherent(
+ urb->dev->bus, mem_flags,
+ &urb->setup_dma,
+ (void **)&urb->setup_packet,
+ sizeof(struct usb_ctrlrequest),
+ DMA_TO_DEVICE);
+ }
+
+ dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+ if (ret == 0 && urb->transfer_buffer_length != 0
+ && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) {
+ if (hcd->self.uses_dma)
urb->transfer_dma = dma_map_single (
hcd->self.controller,
urb->transfer_buffer,
urb->transfer_buffer_length,
- usb_urb_dir_in(urb)
- ? DMA_FROM_DEVICE
- : DMA_TO_DEVICE);
+ dir);
+ else if (hcd->driver->flags & HCD_LOCAL_MEM) {
+ ret = hcd_alloc_coherent(
+ urb->dev->bus, mem_flags,
+ &urb->transfer_dma,
+ &urb->transfer_buffer,
+ urb->transfer_buffer_length,
+ dir);
+
+ if (ret && usb_endpoint_xfer_control(&urb->ep->desc)
+ && !(urb->transfer_flags & URB_NO_SETUP_DMA_MAP))
+ hcd_free_coherent(urb->dev->bus,
+ &urb->setup_dma,
+ (void **)&urb->setup_packet,
+ sizeof(struct usb_ctrlrequest),
+ DMA_TO_DEVICE);
+ }
}
+ return ret;
}
static void unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
{
- if (hcd->self.uses_dma && !is_root_hub(urb->dev)) {
- if (usb_endpoint_xfer_control(&urb->ep->desc)
- && !(urb->transfer_flags & URB_NO_SETUP_DMA_MAP))
+ enum dma_data_direction dir;
+
+ if (is_root_hub(urb->dev))
+ return;
+
+ if (usb_endpoint_xfer_control(&urb->ep->desc)
+ && !(urb->transfer_flags & URB_NO_SETUP_DMA_MAP)) {
+ if (hcd->self.uses_dma)
dma_unmap_single(hcd->self.controller, urb->setup_dma,
sizeof(struct usb_ctrlrequest),
DMA_TO_DEVICE);
- if (urb->transfer_buffer_length != 0
- && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP))
+ else if (hcd->driver->flags & HCD_LOCAL_MEM)
+ hcd_free_coherent(urb->dev->bus, &urb->setup_dma,
+ (void **)&urb->setup_packet,
+ sizeof(struct usb_ctrlrequest),
+ DMA_TO_DEVICE);
+ }
+
+ dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+ if (urb->transfer_buffer_length != 0
+ && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) {
+ if (hcd->self.uses_dma)
dma_unmap_single(hcd->self.controller,
urb->transfer_dma,
urb->transfer_buffer_length,
- usb_urb_dir_in(urb)
- ? DMA_FROM_DEVICE
- : DMA_TO_DEVICE);
+ dir);
+ else if (hcd->driver->flags & HCD_LOCAL_MEM)
+ hcd_free_coherent(urb->dev->bus, &urb->transfer_dma,
+ &urb->transfer_buffer,
+ urb->transfer_buffer_length,
+ dir);
}
}
*/
usb_get_urb(urb);
atomic_inc(&urb->use_count);
+ atomic_inc(&urb->dev->urbnum);
usbmon_urb_submit(&hcd->self, urb);
/* NOTE requirements on root-hub callers (usbfs and the hub
* URBs must be submitted in process context with interrupts
* enabled.
*/
- map_urb_for_dma(hcd, urb);
+ status = map_urb_for_dma(hcd, urb, mem_flags);
+ if (unlikely(status)) {
+ usbmon_urb_submit_error(&hcd->self, urb, status);
+ goto error;
+ }
+
if (is_root_hub(urb->dev))
status = rh_urb_enqueue(hcd, urb);
else
if (unlikely(status)) {
usbmon_urb_submit_error(&hcd->self, urb, status);
unmap_urb_for_dma(hcd, urb);
+ error:
urb->hcpriv = NULL;
INIT_LIST_HEAD(&urb->urb_list);
atomic_dec(&urb->use_count);
+ atomic_dec(&urb->dev->urbnum);
if (urb->reject)
wake_up(&usb_kill_urb_queue);
usb_put_urb(urb);
* usb_hcd_giveback_urb - return URB from HCD to device driver
* @hcd: host controller returning the URB
* @urb: urb being returned to the USB device driver.
+ * @status: completion status code for the URB.
* Context: in_interrupt()
*
* This hands the URB from HCD to its USB device driver, using its
* (and is done using urb->hcpriv). It also released all HCD locks;
* the device driver won't cause problems if it frees, modifies,
* or resubmits this URB.
+ *
+ * If @urb was unlinked, the value of @status will be overridden by
+ * @urb->unlinked. Erroneous short transfers are detected in case
+ * the HCD hasn't checked for them.
*/
-void usb_hcd_giveback_urb (struct usb_hcd *hcd, struct urb *urb)
+void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb, int status)
{
- unmap_urb_for_dma(hcd, urb);
- usbmon_urb_complete (&hcd->self, urb);
- usb_unanchor_urb(urb);
urb->hcpriv = NULL;
- if (unlikely((urb->transfer_flags & URB_SHORT_NOT_OK) &&
+ if (unlikely(urb->unlinked))
+ status = urb->unlinked;
+ else if (unlikely((urb->transfer_flags & URB_SHORT_NOT_OK) &&
urb->actual_length < urb->transfer_buffer_length &&
- !urb->status))
- urb->status = -EREMOTEIO;
+ !status))
+ status = -EREMOTEIO;
+
+ unmap_urb_for_dma(hcd, urb);
+ usbmon_urb_complete(&hcd->self, urb, status);
+ usb_unanchor_urb(urb);
/* pass ownership to the completion handler */
+ urb->status = status;
urb->complete (urb);
atomic_dec (&urb->use_count);
if (unlikely (urb->reject))
wake_up (&usb_kill_urb_queue);
usb_put_urb (urb);
}
-EXPORT_SYMBOL (usb_hcd_giveback_urb);
+EXPORT_SYMBOL_GPL(usb_hcd_giveback_urb);
/*-------------------------------------------------------------------------*/
-/* disables the endpoint: cancels any pending urbs, then synchronizes with
- * the hcd to make sure all endpoint state is gone from hardware, and then
- * waits until the endpoint's queue is completely drained. use for
- * set_configuration, set_interface, driver removal, physical disconnect.
- *
- * example: a qh stored in ep->hcpriv, holding state related to endpoint
- * type, maxpacket size, toggle, halt status, and scheduling.
+/* Cancel all URBs pending on this endpoint and wait for the endpoint's
+ * queue to drain completely. The caller must first insure that no more
+ * URBs can be submitted for this endpoint.
*/
-void usb_hcd_endpoint_disable (struct usb_device *udev,
+void usb_hcd_flush_endpoint(struct usb_device *udev,
struct usb_host_endpoint *ep)
{
struct usb_hcd *hcd;
struct urb *urb;
+ if (!ep)
+ return;
might_sleep();
hcd = bus_to_hcd(udev->bus);
- /* ep is already gone from udev->ep_{in,out}[]; no more submits */
-rescan:
+ /* No more submits can occur */
spin_lock_irq(&hcd_urb_list_lock);
+rescan:
list_for_each_entry (urb, &ep->urb_list, urb_list) {
int is_in;
- /* the urb may already have been unlinked */
- if (urb->status != -EINPROGRESS)
+ if (urb->unlinked)
continue;
usb_get_urb (urb);
is_in = usb_urb_dir_in(urb);
usb_put_urb (urb);
/* list contents may have changed */
+ spin_lock(&hcd_urb_list_lock);
goto rescan;
}
spin_unlock_irq(&hcd_urb_list_lock);
- /* synchronize with the hardware, so old configuration state
- * clears out immediately (and will be freed).
- */
- if (hcd->driver->endpoint_disable)
- hcd->driver->endpoint_disable (hcd, ep);
-
- /* Wait until the endpoint queue is completely empty. Most HCDs
- * will have done this already in their endpoint_disable method,
- * but some might not. And there could be root-hub control URBs
- * still pending since they aren't affected by the HCDs'
- * endpoint_disable methods.
- */
+ /* Wait until the endpoint queue is completely empty */
while (!list_empty (&ep->urb_list)) {
spin_lock_irq(&hcd_urb_list_lock);
}
}
+/* Disables the endpoint: synchronizes with the hcd to make sure all
+ * endpoint state is gone from hardware. usb_hcd_flush_endpoint() must
+ * have been called previously. Use for set_configuration, set_interface,
+ * driver removal, physical disconnect.
+ *
+ * example: a qh stored in ep->hcpriv, holding state related to endpoint
+ * type, maxpacket size, toggle, halt status, and scheduling.
+ */
+void usb_hcd_disable_endpoint(struct usb_device *udev,
+ struct usb_host_endpoint *ep)
+{
+ struct usb_hcd *hcd;
+
+ might_sleep();
+ hcd = bus_to_hcd(udev->bus);
+ if (hcd->driver->endpoint_disable)
+ hcd->driver->endpoint_disable(hcd, ep);
+}
+
/*-------------------------------------------------------------------------*/
/* called in any context */
mod_timer(&hcd->rh_timer, jiffies + msecs_to_jiffies(10));
return status;
}
-EXPORT_SYMBOL (usb_bus_start_enum);
+EXPORT_SYMBOL_GPL(usb_bus_start_enum);
#endif
* usb_hcd_irq - hook IRQs to HCD framework (bus glue)
* @irq: the IRQ being raised
* @__hcd: pointer to the HCD whose IRQ is being signaled
- * @r: saved hardware registers
*
* If the controller isn't HALTed, calls the driver's irq handler.
* Checks whether the controller is now dead.
"USB Host Controller";
return hcd;
}
-EXPORT_SYMBOL (usb_create_hcd);
+EXPORT_SYMBOL_GPL(usb_create_hcd);
static void hcd_release (struct kref *kref)
{
kref_get (&hcd->kref);
return hcd;
}
-EXPORT_SYMBOL (usb_get_hcd);
+EXPORT_SYMBOL_GPL(usb_get_hcd);
void usb_put_hcd (struct usb_hcd *hcd)
{
if (hcd)
kref_put (&hcd->kref, hcd_release);
}
-EXPORT_SYMBOL (usb_put_hcd);
+EXPORT_SYMBOL_GPL(usb_put_hcd);
/**
* usb_add_hcd - finish generic HCD structure initialization and register
hcd_buffer_destroy(hcd);
return retval;
}
-EXPORT_SYMBOL (usb_add_hcd);
+EXPORT_SYMBOL_GPL(usb_add_hcd);
/**
* usb_remove_hcd - shutdown processing for generic HCDs
usb_deregister_bus(&hcd->self);
hcd_buffer_destroy(hcd);
}
-EXPORT_SYMBOL (usb_remove_hcd);
+EXPORT_SYMBOL_GPL(usb_remove_hcd);
void
usb_hcd_platform_shutdown(struct platform_device* dev)
if (hcd->driver->shutdown)
hcd->driver->shutdown(hcd);
}
-EXPORT_SYMBOL (usb_hcd_platform_shutdown);
+EXPORT_SYMBOL_GPL(usb_hcd_platform_shutdown);
/*-------------------------------------------------------------------------*/
projects / firefly-linux-kernel-4.4.55.git / blobdiff