* low/fullspeed transfer can "carry over" from one uframe to the next,
* since the TT just performs downstream transfers in sequence.
*
- * For example two seperate 100 usec transfers can start in the same uframe,
+ * For example two separate 100 usec transfers can start in the same uframe,
* and the second one would "carry over" 75 usecs into the next uframe.
*/
static void
}
/*-------------------------------------------------------------------------*/
-#ifdef CONFIG_CPU_FREQ
-
-static int safe_to_modify_i (struct ehci_hcd *ehci, struct ehci_qh *qh)
-{
- int now; /* current (frame * 8) + uframe */
- int prev_start, next_start; /* uframes from/to split start */
- int start_uframe = ffs(le32_to_cpup (&qh->hw_info2) & QH_SMASK);
- int end_uframe = fls((le32_to_cpup (&qh->hw_info2) & QH_CMASK) >> 8);
- int split_duration = end_uframe - start_uframe;
-
- now = readl(&ehci->regs->frame_index) % (ehci->periodic_size << 3);
-
- next_start = ((1024 << 3) + (qh->start << 3) + start_uframe - now)
- % (qh->period << 3);
- prev_start = (qh->period << 3) - next_start;
-
- /*
- * Make sure there will be at least one uframe when qh is safe.
- */
- if ((qh->period << 3) <= (ehci->i_thresh + 2 + split_duration))
- /* never safe */
- return -EINVAL;
-
- /*
- * Wait 1 uframe after transaction should have started, to make
- * sure controller has time to write back overlay, so we can
- * check QTD_STS_STS to see if transaction is in progress.
- */
- if ((next_start > ehci->i_thresh) && (prev_start > 1))
- /* safe to set "i" bit if split isn't in progress */
- return (qh->hw_token & STATUS_BIT(ehci)) ? 0 : 1;
- else
- return 0;
-}
-
-/* Set inactivate bit for all the split interrupt QHs. */
-static void qh_inactivate_split_intr_qhs (struct ehci_hcd *ehci)
-{
- struct ehci_qh *qh;
- int not_done, safe;
- u32 inactivate = INACTIVATE_BIT(ehci);
- u32 active = ACTIVE_BIT(ehci);
-
- do {
- not_done = 0;
- list_for_each_entry(qh, &ehci->split_intr_qhs,
- split_intr_qhs) {
- if (qh->hw_info1 & inactivate)
- /* already off */
- continue;
- /*
- * To avoid setting "I" after the start split happens,
- * don't set it if the QH might be cached in the
- * controller. Some HCs (Broadcom/ServerWorks HT1000)
- * will stop in the middle of a split transaction when
- * the "I" bit is set.
- */
- safe = safe_to_modify_i(ehci, qh);
- if (safe == 0) {
- not_done = 1;
- } else if (safe > 0) {
- qh->was_active = qh->hw_token & active;
- qh->hw_info1 |= inactivate;
- }
- }
- } while (not_done);
- wmb();
-}
-
-static void qh_reactivate_split_intr_qhs (struct ehci_hcd *ehci)
-{
- struct ehci_qh *qh;
- u32 token;
- int not_done, safe;
- u32 inactivate = INACTIVATE_BIT(ehci);
- u32 active = ACTIVE_BIT(ehci);
- u32 halt = HALT_BIT(ehci);
-
- do {
- not_done = 0;
- list_for_each_entry(qh, &ehci->split_intr_qhs, split_intr_qhs) {
- if (!(qh->hw_info1 & inactivate)) /* already on */
- continue;
- /*
- * Don't reactivate if cached, or controller might
- * overwrite overlay after we modify it!
- */
- safe = safe_to_modify_i(ehci, qh);
- if (safe == 0) {
- not_done = 1;
- } else if (safe > 0) {
- /* See EHCI 1.0 section 4.15.2.4. */
- token = qh->hw_token;
- qh->hw_token = (token | halt) & ~active;
- wmb();
- qh->hw_info1 &= ~inactivate;
- wmb();
- qh->hw_token = (token & ~halt) | qh->was_active;
- }
- }
- } while (not_done);
-}
-#endif
/* periodic schedule slots have iso tds (normal or split) first, then a
* sparse tree for active interrupt transfers.
period, hc32_to_cpup(ehci, &qh->hw_info2) & (QH_CMASK | QH_SMASK),
qh, qh->start, qh->usecs, qh->c_usecs);
-#ifdef CONFIG_CPU_FREQ
- /*
- * If low/full speed interrupt QHs are inactive (because of
- * cpufreq changing processor speeds), start QH with I flag set--
- * it will automatically be cleared when cpufreq is done.
- */
- if (ehci->cpufreq_changing)
- if (!(qh->hw_info1 & (cpu_to_le32(1 << 13))))
- qh->hw_info1 |= INACTIVATE_BIT(ehci);
-#endif
-
/* high bandwidth, or otherwise every microframe */
if (period == 0)
period = 1;
? ((qh->usecs + qh->c_usecs) / qh->period)
: (qh->usecs * 8);
-#ifdef CONFIG_CPU_FREQ
- /* add qh to list of low/full speed interrupt QHs, if applicable */
- if (!(qh->hw_info1 & (cpu_to_le32(1 << 13)))) {
- list_add(&qh->split_intr_qhs, &ehci->split_intr_qhs);
- }
-#endif
/* maybe enable periodic schedule processing */
if (!ehci->periodic_sched++)
return enable_periodic (ehci);
// THEN
// qh->hw_info1 |= __constant_cpu_to_hc32(1 << 7 /* "ignore" */);
-#ifdef CONFIG_CPU_FREQ
- /* remove qh from list of low/full speed interrupt QHs */
- if (!(qh->hw_info1 & (cpu_to_le32(1 << 13)))) {
- list_del_init(&qh->split_intr_qhs);
- }
-#endif
-
/* high bandwidth, or otherwise part of every microframe */
if ((period = qh->period) == 0)
period = 1;
static int intr_submit (
struct ehci_hcd *ehci,
- struct usb_host_endpoint *ep,
struct urb *urb,
struct list_head *qtd_list,
gfp_t mem_flags
unsigned epnum;
unsigned long flags;
struct ehci_qh *qh;
- int status = 0;
+ int status;
struct list_head empty;
/* get endpoint and transfer/schedule data */
- epnum = ep->desc.bEndpointAddress;
+ epnum = urb->ep->desc.bEndpointAddress;
spin_lock_irqsave (&ehci->lock, flags);
if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE,
&ehci_to_hcd(ehci)->flags))) {
status = -ESHUTDOWN;
- goto done;
+ goto done_not_linked;
}
+ status = usb_hcd_link_urb_to_ep(ehci_to_hcd(ehci), urb);
+ if (unlikely(status))
+ goto done_not_linked;
/* get qh and force any scheduling errors */
INIT_LIST_HEAD (&empty);
- qh = qh_append_tds (ehci, urb, &empty, epnum, &ep->hcpriv);
+ qh = qh_append_tds(ehci, urb, &empty, epnum, &urb->ep->hcpriv);
if (qh == NULL) {
status = -ENOMEM;
goto done;
}
/* then queue the urb's tds to the qh */
- qh = qh_append_tds (ehci, urb, qtd_list, epnum, &ep->hcpriv);
+ qh = qh_append_tds(ehci, urb, qtd_list, epnum, &urb->ep->hcpriv);
BUG_ON (qh == NULL);
/* ... update usbfs periodic stats */
ehci_to_hcd(ehci)->self.bandwidth_int_reqs++;
done:
+ if (unlikely(status))
+ usb_hcd_unlink_urb_from_ep(ehci_to_hcd(ehci), urb);
+done_not_linked:
spin_unlock_irqrestore (&ehci->lock, flags);
if (status)
qtd_list_free (ehci, urb, qtd_list);
/* give urb back to the driver ... can be out-of-order */
dev = urb->dev;
- ehci_urb_done (ehci, urb);
+ ehci_urb_done(ehci, urb, 0);
urb = NULL;
/* defer stopping schedule; completion can submit */
/* schedule ... need to lock */
spin_lock_irqsave (&ehci->lock, flags);
if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE,
- &ehci_to_hcd(ehci)->flags)))
+ &ehci_to_hcd(ehci)->flags))) {
status = -ESHUTDOWN;
- else
- status = iso_stream_schedule (ehci, urb, stream);
+ goto done_not_linked;
+ }
+ status = usb_hcd_link_urb_to_ep(ehci_to_hcd(ehci), urb);
+ if (unlikely(status))
+ goto done_not_linked;
+ status = iso_stream_schedule(ehci, urb, stream);
if (likely (status == 0))
itd_link_urb (ehci, urb, ehci->periodic_size << 3, stream);
+ else
+ usb_hcd_unlink_urb_from_ep(ehci_to_hcd(ehci), urb);
+done_not_linked:
spin_unlock_irqrestore (&ehci->lock, flags);
done:
/* give urb back to the driver */
dev = urb->dev;
- ehci_urb_done (ehci, urb);
+ ehci_urb_done(ehci, urb, 0);
urb = NULL;
/* defer stopping schedule; completion can submit */
/* schedule ... need to lock */
spin_lock_irqsave (&ehci->lock, flags);
if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE,
- &ehci_to_hcd(ehci)->flags)))
+ &ehci_to_hcd(ehci)->flags))) {
status = -ESHUTDOWN;
- else
- status = iso_stream_schedule (ehci, urb, stream);
+ goto done_not_linked;
+ }
+ status = usb_hcd_link_urb_to_ep(ehci_to_hcd(ehci), urb);
+ if (unlikely(status))
+ goto done_not_linked;
+ status = iso_stream_schedule(ehci, urb, stream);
if (status == 0)
sitd_link_urb (ehci, urb, ehci->periodic_size << 3, stream);
+ else
+ usb_hcd_unlink_urb_from_ep(ehci_to_hcd(ehci), urb);
+done_not_linked:
spin_unlock_irqrestore (&ehci->lock, flags);
done:
projects / firefly-linux-kernel-4.4.55.git / blobdiff