* - PanJit TouchSet
* - eTurboTouch
* - Gunze AHL61
+ * - DMC TSC-10/25
*
* Copyright (C) 2004-2006 by Daniel Ritz <daniel.ritz@gmx.ch>
* Copyright (C) by Todd E. Johnson (mtouchusb.c)
* - ITM parts are from itmtouch.c
* - 3M parts are from mtouchusb.c
* - PanJit parts are from an unmerged driver by Lanslott Gish
+ * - DMC TSC 10/25 are from Holger Schurig, with ideas from an unmerged
+ * driver from Marius Vollmer
*
*****************************************************************************/
//#define DEBUG
-#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/input.h>
#include <linux/usb/input.h>
-#define DRIVER_VERSION "v0.4"
+#define DRIVER_VERSION "v0.5"
#define DRIVER_AUTHOR "Daniel Ritz <daniel.ritz@gmx.ch>"
#define DRIVER_DESC "USB Touchscreen Driver"
int rept_size;
int flags;
- void (*process_pkt) (struct usbtouch_usb *usbtouch, struct pt_regs *regs, unsigned char *pkt, int len);
+ void (*process_pkt) (struct usbtouch_usb *usbtouch, unsigned char *pkt, int len);
int (*get_pkt_len) (unsigned char *pkt, int len);
int (*read_data) (unsigned char *pkt, int *x, int *y, int *touch, int *press);
int (*init) (struct usbtouch_usb *usbtouch);
#ifdef MULTI_PACKET
static void usbtouch_process_multi(struct usbtouch_usb *usbtouch,
- struct pt_regs *regs,
unsigned char *pkt, int len);
#endif
DEVTYPE_ITM,
DEVTYPE_ETURBO,
DEVTYPE_GUNZE,
+ DEVTYPE_DMC_TSC10,
};
static struct usb_device_id usbtouch_devices[] = {
{USB_DEVICE(0x0637, 0x0001), .driver_info = DEVTYPE_GUNZE},
#endif
+#ifdef CONFIG_USB_TOUCHSCREEN_DMC_TSC10
+ {USB_DEVICE(0x0afa, 0x03e8), .driver_info = DEVTYPE_DMC_TSC10},
+#endif
+
{}
};
{
*x = ((pkt[0] & 0x1F) << 7) | (pkt[3] & 0x7F);
*y = ((pkt[1] & 0x1F) << 7) | (pkt[4] & 0x7F);
- *press = ((pkt[2] & 0x1F) << 7) | (pkt[5] & 0x7F);
+ *press = ((pkt[2] & 0x01) << 7) | (pkt[5] & 0x7F);
*touch = ~pkt[7] & 0x20;
- return 1;
+ return *touch;
}
#endif
}
#endif
+/*****************************************************************************
+ * DMC TSC-10/25 Part
+ *
+ * Documentation about the controller and it's protocol can be found at
+ * http://www.dmccoltd.com/files/controler/tsc10usb_pi_e.pdf
+ * http://www.dmccoltd.com/files/controler/tsc25_usb_e.pdf
+ */
+#ifdef CONFIG_USB_TOUCHSCREEN_DMC_TSC10
+
+/* supported data rates. currently using 130 */
+#define TSC10_RATE_POINT 0x50
+#define TSC10_RATE_30 0x40
+#define TSC10_RATE_50 0x41
+#define TSC10_RATE_80 0x42
+#define TSC10_RATE_100 0x43
+#define TSC10_RATE_130 0x44
+#define TSC10_RATE_150 0x45
+
+/* commands */
+#define TSC10_CMD_RESET 0x55
+#define TSC10_CMD_RATE 0x05
+#define TSC10_CMD_DATA1 0x01
+
+static int dmc_tsc10_init(struct usbtouch_usb *usbtouch)
+{
+ struct usb_device *dev = usbtouch->udev;
+ int ret;
+ unsigned char buf[2];
+
+ /* reset */
+ buf[0] = buf[1] = 0xFF;
+ ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0),
+ TSC10_CMD_RESET,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 0, 0, buf, 2, USB_CTRL_SET_TIMEOUT);
+ if (ret < 0)
+ return ret;
+ if (buf[0] != 0x06 || buf[1] != 0x00)
+ return -ENODEV;
+
+ /* set coordinate output rate */
+ buf[0] = buf[1] = 0xFF;
+ ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0),
+ TSC10_CMD_RATE,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ TSC10_RATE_150, 0, buf, 2, USB_CTRL_SET_TIMEOUT);
+ if (ret < 0)
+ return ret;
+ if (buf[0] != 0x06 || buf[1] != 0x00)
+ return -ENODEV;
+
+ /* start sending data */
+ ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0),
+ TSC10_CMD_DATA1,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 0, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+
+static int dmc_tsc10_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press)
+{
+ *x = ((pkt[2] & 0x03) << 8) | pkt[1];
+ *y = ((pkt[4] & 0x03) << 8) | pkt[3];
+ *touch = pkt[0] & 0x01;
+
+ return 1;
+}
+#endif
+
+
/*****************************************************************************
* the different device descriptors
*/
.read_data = gunze_read_data,
},
#endif
+
+#ifdef CONFIG_USB_TOUCHSCREEN_DMC_TSC10
+ [DEVTYPE_DMC_TSC10] = {
+ .min_xc = 0x0,
+ .max_xc = 0x03ff,
+ .min_yc = 0x0,
+ .max_yc = 0x03ff,
+ .rept_size = 5,
+ .init = dmc_tsc10_init,
+ .read_data = dmc_tsc10_read_data,
+ },
+#endif
};
* Generic Part
*/
static void usbtouch_process_pkt(struct usbtouch_usb *usbtouch,
- struct pt_regs *regs, unsigned char *pkt, int len)
+ unsigned char *pkt, int len)
{
int x, y, touch, press;
struct usbtouch_device_info *type = usbtouch->type;
if (!type->read_data(pkt, &x, &y, &touch, &press))
return;
- input_regs(usbtouch->input, regs);
input_report_key(usbtouch->input, BTN_TOUCH, touch);
if (swap_xy) {
#ifdef MULTI_PACKET
static void usbtouch_process_multi(struct usbtouch_usb *usbtouch,
- struct pt_regs *regs,
unsigned char *pkt, int len)
{
unsigned char *buffer;
if (usbtouch->buf_len + tmp >= usbtouch->type->rept_size)
goto out_flush_buf;
memcpy(usbtouch->buffer + usbtouch->buf_len, pkt, tmp);
- usbtouch_process_pkt(usbtouch, regs, usbtouch->buffer, pkt_len);
+ usbtouch_process_pkt(usbtouch, usbtouch->buffer, pkt_len);
buffer = pkt + tmp;
buf_len = len - tmp;
/* full packet: process */
if (likely((pkt_len > 0) && (pkt_len <= buf_len - pos))) {
- usbtouch_process_pkt(usbtouch, regs, buffer + pos, pkt_len);
+ usbtouch_process_pkt(usbtouch, buffer + pos, pkt_len);
} else {
/* incomplete packet: save in buffer */
memcpy(usbtouch->buffer, buffer + pos, buf_len - pos);
#endif
-static void usbtouch_irq(struct urb *urb, struct pt_regs *regs)
+static void usbtouch_irq(struct urb *urb)
{
struct usbtouch_usb *usbtouch = urb->context;
int retval;
goto exit;
}
- usbtouch->type->process_pkt(usbtouch, regs, usbtouch->data, urb->actual_length);
+ usbtouch->type->process_pkt(usbtouch, usbtouch->data, urb->actual_length);
exit:
retval = usb_submit_urb(urb, GFP_ATOMIC);
type->max_press, 0, 0);
usb_fill_int_urb(usbtouch->irq, usbtouch->udev,
- usb_rcvintpipe(usbtouch->udev, 0x81),
+ usb_rcvintpipe(usbtouch->udev, endpoint->bEndpointAddress),
usbtouch->data, type->rept_size,
usbtouch_irq, usbtouch, endpoint->bInterval);
projects / firefly-linux-kernel-4.4.55.git / blobdiff