#include "llvm/Support/DataTypes.h"
#include "llvm/CodeGen/DebugLoc.h"
#include <cassert>
+#include <climits>
namespace llvm {
///
struct SDVTList {
const MVT *VTs;
- unsigned short NumVTs;
+ unsigned int NumVTs;
};
/// ISD namespace - This namespace contains an enum which represents all of the
namespace ISD {
//===--------------------------------------------------------------------===//
- /// ISD::NodeType enum - This enum defines all of the operators valid in a
- /// SelectionDAG.
+ /// ISD::NodeType enum - This enum defines the target-independent operators
+ /// for a SelectionDAG.
+ ///
+ /// Targets may also define target-dependent operator codes for SDNodes. For
+ /// example, on x86, these are the enum values in the X86ISD namespace.
+ /// Targets should aim to use target-independent operators to model their
+ /// instruction sets as much as possible, and only use target-dependent
+ /// operators when they have special requirements.
+ ///
+ /// Finally, during and after selection proper, SNodes may use special
+ /// operator codes that correspond directly with MachineInstr opcodes. These
+ /// are used to represent selected instructions. See the isMachineOpcode()
+ /// and getMachineOpcode() member functions of SDNode.
///
enum NodeType {
- // DELETED_NODE - This is an illegal flag value that is used to catch
+ // DELETED_NODE - This is an illegal value that is used to catch
// errors. This opcode is not a legal opcode for any node.
DELETED_NODE,
-
+
// EntryToken - This is the marker used to indicate the start of the region.
EntryToken,
// single token result. This is used to represent the fact that the operand
// operators are independent of each other.
TokenFactor,
-
- // AssertSext, AssertZext - These nodes record if a register contains a
- // value that has already been zero or sign extended from a narrower type.
- // These nodes take two operands. The first is the node that has already
+
+ // AssertSext, AssertZext - These nodes record if a register contains a
+ // value that has already been zero or sign extended from a narrower type.
+ // These nodes take two operands. The first is the node that has already
// been extended, and the second is a value type node indicating the width
// of the extension
AssertSext, AssertZext,
// The address of the GOT
GLOBAL_OFFSET_TABLE,
-
+
// FRAMEADDR, RETURNADDR - These nodes represent llvm.frameaddress and
// llvm.returnaddress on the DAG. These nodes take one operand, the index
// of the frame or return address to return. An index of zero corresponds
// first (possible) on-stack argument. This is needed for correct stack
// adjustment during unwind.
FRAME_TO_ARGS_OFFSET,
-
+
// RESULT, OUTCHAIN = EXCEPTIONADDR(INCHAIN) - This node represents the
// address of the exception block on entry to an landing pad block.
EXCEPTIONADDR,
-
+
// RESULT, OUTCHAIN = EHSELECTION(INCHAIN, EXCEPTION) - This node represents
// the selection index of the exception thrown.
EHSELECTION,
// simplification of the constant.
TargetConstant,
TargetConstantFP,
-
+
// TargetGlobalAddress - Like GlobalAddress, but the DAG does no folding or
// anything else with this node, and this is valid in the target-specific
// dag, turning into a GlobalAddress operand.
TargetJumpTable,
TargetConstantPool,
TargetExternalSymbol,
-
+
/// RESULT = INTRINSIC_WO_CHAIN(INTRINSICID, arg1, arg2, ...)
/// This node represents a target intrinsic function with no side effects.
/// The first operand is the ID number of the intrinsic from the
/// llvm::Intrinsic namespace. The operands to the intrinsic follow. The
/// node has returns the result of the intrinsic.
INTRINSIC_WO_CHAIN,
-
+
/// RESULT,OUTCHAIN = INTRINSIC_W_CHAIN(INCHAIN, INTRINSICID, arg1, ...)
/// This node represents a target intrinsic function with side effects that
/// returns a result. The first operand is a chain pointer. The second is
/// second is the ID number of the intrinsic from the llvm::Intrinsic
/// namespace. The operands to the intrinsic follow.
INTRINSIC_VOID,
-
+
// CopyToReg - This node has three operands: a chain, a register number to
- // set to this value, and a value.
+ // set to this value, and a value.
CopyToReg,
// CopyFromReg - This node indicates that the input value is a virtual or
// UNDEF - An undefined node
UNDEF,
-
+
/// FORMAL_ARGUMENTS(CHAIN, CC#, ISVARARG, FLAG0, ..., FLAGn) - This node
/// represents the formal arguments for a function. CC# is a Constant value
/// indicating the calling convention of the function, and ISVARARG is a
/// has one result value for each incoming argument, plus one for the output
/// chain. It must be custom legalized. See description of CALL node for
/// FLAG argument contents explanation.
- ///
+ ///
FORMAL_ARGUMENTS,
-
+
/// RV1, RV2...RVn, CHAIN = CALL(CHAIN, CALLEE,
/// ARG0, FLAG0, ARG1, FLAG1, ... ARGn, FLAGn)
/// This node represents a fully general function call, before the legalizer
// SDIVREM/UDIVREM - Divide two integers and produce both a quotient and
// remainder result.
SDIVREM, UDIVREM,
-
+
// CARRY_FALSE - This node is used when folding other nodes,
// like ADDC/SUBC, which indicate the carry result is always false.
CARRY_FALSE,
-
+
// Carry-setting nodes for multiple precision addition and subtraction.
// These nodes take two operands of the same value type, and produce two
// results. The first result is the normal add or sub result, the second
// result is the carry flag result.
ADDC, SUBC,
-
+
// Carry-using nodes for multiple precision addition and subtraction. These
// nodes take three operands: The first two are the normal lhs and rhs to
// the add or sub, and the third is the input carry flag. These nodes
// INT = FGETSIGN(FP) - Return the sign bit of the specified floating point
// value as an integer 0/1 value.
FGETSIGN,
-
+
/// BUILD_VECTOR(ELT0, ELT1, ELT2, ELT3,...) - Return a vector
/// with the specified, possibly variable, elements. The number of elements
- /// is required to be a power of two.
+ /// is required to be a power of two. The types of the operands must
+ /// all be the same. They must match the vector element type, except if an
+ /// integer element type is not legal for the target, the operands may
+ /// be promoted to a legal type, in which case the operands are implicitly
+ /// truncated to the vector element types.
BUILD_VECTOR,
-
+
/// INSERT_VECTOR_ELT(VECTOR, VAL, IDX) - Returns VECTOR with the element
/// at IDX replaced with VAL. If the type of VAL is larger than the vector
/// element type then VAL is truncated before replacement.
/// EXTRACT_VECTOR_ELT(VECTOR, IDX) - Returns a single element from VECTOR
/// identified by the (potentially variable) element number IDX.
EXTRACT_VECTOR_ELT,
-
+
/// CONCAT_VECTORS(VECTOR0, VECTOR1, ...) - Given a number of values of
/// vector type with the same length and element type, this produces a
/// concatenated vector result value, with length equal to the sum of the
/// lengths of the input vectors.
CONCAT_VECTORS,
-
+
/// EXTRACT_SUBVECTOR(VECTOR, IDX) - Returns a subvector from VECTOR (an
/// vector value) starting with the (potentially variable) element number
/// IDX, which must be a multiple of the result vector length.
/// scalar value into element 0 of the resultant vector type. The top
/// elements 1 to N-1 of the N-element vector are undefined.
SCALAR_TO_VECTOR,
-
- // EXTRACT_SUBREG - This node is used to extract a sub-register value.
- // This node takes a superreg and a constant sub-register index as operands.
- // Note sub-register indices must be increasing. That is, if the
- // sub-register index of a 8-bit sub-register is N, then the index for a
- // 16-bit sub-register must be at least N+1.
- EXTRACT_SUBREG,
-
- // INSERT_SUBREG - This node is used to insert a sub-register value.
- // This node takes a superreg, a subreg value, and a constant sub-register
- // index as operands.
- INSERT_SUBREG,
-
+
// MULHU/MULHS - Multiply high - Multiply two integers of type iN, producing
// an unsigned/signed value of type i[2*N], then return the top part.
MULHU, MULHS,
// i1 then the high bits must conform to getBooleanContents.
SELECT,
- // Select with condition operator - This selects between a true value and
+ // Select with condition operator - This selects between a true value and
// a false value (ops #2 and #3) based on the boolean result of comparing
- // the lhs and rhs (ops #0 and #1) of a conditional expression with the
+ // the lhs and rhs (ops #0 and #1) of a conditional expression with the
// condition code in op #4, a CondCodeSDNode.
SELECT_CC,
// Vector SetCC operator - This evaluates to a vector of integer elements
// with the high bit in each element set to true if the comparison is true
- // and false if the comparison is false. All other bits in each element
+ // and false if the comparison is false. All other bits in each element
// are undefined. The operands to this are the left and right operands
// to compare (ops #0, and #1) and the condition code to compare them with
// (op #2) as a CondCodeSDNode.
// ANY_EXTEND - Used for integer types. The high bits are undefined.
ANY_EXTEND,
-
+
// TRUNCATE - Completely drop the high bits.
TRUNCATE,
/// The TRUNC = 1 case is used in cases where we know that the value will
/// not be modified by the node, because Y is not using any of the extra
/// precision of source type. This allows certain transformations like
- /// FP_EXTEND(FP_ROUND(X,1)) -> X which are not safe for
+ /// FP_EXTEND(FP_ROUND(X,1)) -> X which are not safe for
/// FP_EXTEND(FP_ROUND(X,0)) because the extra bits aren't removed.
FP_ROUND,
-
+
// FLT_ROUNDS_ - Returns current rounding mode:
// -1 Undefined
// 0 Round to 0
// BIT_CONVERT - Theis operator converts between integer and FP values, as
// if one was stored to memory as integer and the other was loaded from the
- // same address (or equivalently for vector format conversions, etc). The
- // source and result are required to have the same bit size (e.g.
- // f32 <-> i32). This can also be used for int-to-int or fp-to-fp
+ // same address (or equivalently for vector format conversions, etc). The
+ // source and result are required to have the same bit size (e.g.
+ // f32 <-> i32). This can also be used for int-to-int or fp-to-fp
// conversions, but that is a noop, deleted by getNode().
BIT_CONVERT,
-
+
// CONVERT_RNDSAT - This operator is used to support various conversions
// between various types (float, signed, unsigned and vectors of those
// types) with rounding and saturation. NOTE: Avoid using this operator as
// 4) saturation imm
// 5) ISD::CvtCode indicating the type of conversion to do
CONVERT_RNDSAT,
-
+
// FNEG, FABS, FSQRT, FSIN, FCOS, FPOWI, FPOW,
// FLOG, FLOG2, FLOG10, FEXP, FEXP2,
// FCEIL, FTRUNC, FRINT, FNEARBYINT, FFLOOR - Perform various unary floating
FNEG, FABS, FSQRT, FSIN, FCOS, FPOWI, FPOW,
FLOG, FLOG2, FLOG10, FEXP, FEXP2,
FCEIL, FTRUNC, FRINT, FNEARBYINT, FFLOOR,
-
+
// LOAD and STORE have token chains as their first operand, then the same
// operands as an LLVM load/store instruction, then an offset node that
// is added / subtracted from the base pointer to form the address (for
// compare, rather than as a combined SetCC node. The operands in order are
// chain, cc, lhs, rhs, block to branch to if condition is true.
BR_CC,
-
+
// RET - Return from function. The first operand is the chain,
// and any subsequent operands are pairs of return value and return value
// attributes (see CALL for description of attributes) for the function.
// Operand #2n+3: A TargetConstant, indicating if the reg is a use/def
// Operand #last: Optional, an incoming flag.
INLINEASM,
-
+
// DBG_LABEL, EH_LABEL - Represents a label in mid basic block used to track
// locations needed for debug and exception handling tables. These nodes
// take a chain as input and return a chain.
// a chain, while the next two operands are first two arguments (address
// and variable) of a llvm.dbg.declare instruction.
DECLARE,
-
+
// STACKSAVE - STACKSAVE has one operand, an input chain. It produces a
// value, the same type as the pointer type for the system, and an output
// chain.
STACKSAVE,
-
+
// STACKRESTORE has two operands, an input chain and a pointer to restore to
// it returns an output chain.
STACKRESTORE,
-
+
// CALLSEQ_START/CALLSEQ_END - These operators mark the beginning and end of
// a call sequence, and carry arbitrary information that target might want
// to know. The first operand is a chain, the rest are specified by the
// CALLSEQ_START..CALLSEQ_END pairs may not be nested.
CALLSEQ_START, // Beginning of a call sequence
CALLSEQ_END, // End of a call sequence
-
- // VAARG - VAARG has three operands: an input chain, a pointer, and a
+
+ // VAARG - VAARG has three operands: an input chain, a pointer, and a
// SRCVALUE. It returns a pair of values: the vaarg value and a new chain.
VAARG,
-
+
// VACOPY - VACOPY has five operands: an input chain, a destination pointer,
// a source pointer, a SRCVALUE for the destination, and a SRCVALUE for the
// source.
VACOPY,
-
+
// VAEND, VASTART - VAEND and VASTART have three operands: an input chain, a
// pointer, and a SRCVALUE.
VAEND, VASTART,
// READCYCLECOUNTER - This corresponds to the readcyclecounter intrinsic.
// The only operand is a chain and a value and a chain are produced. The
- // value is the contents of the architecture specific cycle counter like
+ // value is the contents of the architecture specific cycle counter like
// register (or other high accuracy low latency clock source)
READCYCLECOUNTER,
// column number, and a pointer to a CompileUnit object identifying
// the containing compilation unit. It produces a token chain as output.
DBG_STOPPOINT,
-
+
// DEBUG_LOC - This node is used to represent source line information
// embedded in the code. It takes a token chain as input, then a line
// number, then a column then a file id (provided by MachineModuleInfo.) It
// read / write specifier, and locality specifier.
PREFETCH,
- // OUTCHAIN = MEMBARRIER(INCHAIN, load-load, load-store, store-load,
+ // OUTCHAIN = MEMBARRIER(INCHAIN, load-load, load-store, store-load,
// store-store, device)
// This corresponds to the memory.barrier intrinsic.
// it takes an input chain, 4 operands to specify the type of barrier, an
ATOMIC_LOAD_MAX,
ATOMIC_LOAD_UMIN,
ATOMIC_LOAD_UMAX,
-
+
// BUILTIN_OP_END - This must be the last enum value in this list.
BUILTIN_OP_END
};
/// isDebugLabel - Return true if the specified node represents a debug
/// label (i.e. ISD::DBG_LABEL or TargetInstrInfo::DBG_LABEL node).
bool isDebugLabel(const SDNode *N);
-
+
//===--------------------------------------------------------------------===//
- /// MemIndexedMode enum - This enum defines the load / store indexed
+ /// MemIndexedMode enum - This enum defines the load / store indexed
/// addressing modes.
///
/// UNINDEXED "Normal" load / store. The effective address is already
/// integer result type.
/// ZEXTLOAD loads the integer operand and zero extends it to a larger
/// integer result type.
- /// EXTLOAD is used for three things: floating point extending loads,
+ /// EXTLOAD is used for three things: floating point extending loads,
/// integer extending loads [the top bits are undefined], and vector
/// extending loads [load into low elt].
///
CondCode getSetCCAndOperation(CondCode Op1, CondCode Op2, bool isInteger);
//===--------------------------------------------------------------------===//
- /// CvtCode enum - This enum defines the various converts CONVERT_RNDSAT
+ /// CvtCode enum - This enum defines the various converts CONVERT_RNDSAT
/// supports.
enum CvtCode {
CVT_FF, // Float from Float
inline unsigned getMachineOpcode() const;
inline const DebugLoc getDebugLoc() const;
-
+
/// reachesChainWithoutSideEffects - Return true if this operand (which must
- /// be a chain) reaches the specified operand without crossing any
+ /// be a chain) reaches the specified operand without crossing any
/// side-effecting instructions. In practice, this looks through token
/// factors and non-volatile loads. In order to remain efficient, this only
/// looks a couple of nodes in, it does not do an exhaustive search.
- bool reachesChainWithoutSideEffects(SDValue Dest,
+ bool reachesChainWithoutSideEffects(SDValue Dest,
unsigned Depth = 2) const;
-
+
/// use_empty - Return true if there are no nodes using value ResNo
/// of Node.
///
template<> struct DenseMapInfo<SDValue> {
- static inline SDValue getEmptyKey() {
- return SDValue((SDNode*)-1, -1U);
+ static inline SDValue getEmptyKey() {
+ return SDValue((SDNode*)-1, -1U);
}
- static inline SDValue getTombstoneKey() {
+ static inline SDValue getTombstoneKey() {
return SDValue((SDNode*)-1, 0);
}
static unsigned getHashValue(const SDValue &Val) {
SDValue Val;
/// User - The user of this value.
SDNode *User;
- /// Prev, Next - Pointers to the uses list of the SDNode referred by
+ /// Prev, Next - Pointers to the uses list of the SDNode referred by
/// this operand.
SDUse **Prev, *Next;
/// If implicit conversion to SDValue doesn't work, the get() method returns
/// the SDValue.
const SDValue &get() const { return Val; }
-
+
/// getUser - This returns the SDNode that contains this Use.
SDNode *getUser() { return User; }
bool operator==(const SDValue &V) const {
return Val == V;
}
-
+
/// operator!= - Convenience function for get().operator!=
bool operator!=(const SDValue &V) const {
return Val != V;
/// NodeType - The operation that this node performs.
///
short NodeType;
-
+
/// OperandsNeedDelete - This is true if OperandList was new[]'d. If true,
/// then they will be delete[]'d when the node is destroyed.
unsigned short OperandsNeedDelete : 1;
/// NodeId - Unique id per SDNode in the DAG.
int NodeId;
- /// debugLoc - source line information.
- DebugLoc debugLoc;
-
/// OperandList - The values that are used by this operation.
///
SDUse *OperandList;
-
+
/// ValueList - The types of the values this node defines. SDNode's may
/// define multiple values simultaneously.
const MVT *ValueList;
- /// NumOperands/NumValues - The number of entries in the Operand/Value list.
- unsigned short NumOperands, NumValues;
-
/// UseList - List of uses for this SDNode.
SDUse *UseList;
+ /// NumOperands/NumValues - The number of entries in the Operand/Value list.
+ unsigned short NumOperands, NumValues;
+
+ /// debugLoc - source line information.
+ DebugLoc debugLoc;
+
/// getValueTypeList - Return a pointer to the specified value type.
static const MVT *getValueTypeList(MVT VT);
unsigned getOpcode() const { return (unsigned short)NodeType; }
/// isTargetOpcode - Test if this node has a target-specific opcode (in the
- /// <target>ISD namespace).
+ /// \<target\>ISD namespace).
bool isTargetOpcode() const { return NodeType >= ISD::BUILTIN_OP_END; }
/// isMachineOpcode - Test if this node has a post-isel opcode, directly
void setDebugLoc(const DebugLoc dl) { debugLoc = dl; }
/// use_iterator - This class provides iterator support for SDUse
- /// operands that use a specific SDNode.
+ /// operands that use a specific SDNode.
class use_iterator
: public forward_iterator<SDUse, ptrdiff_t> {
SDUse *Op;
bool operator!=(const use_iterator &x) const {
return !operator==(x);
}
-
+
/// atEnd - return true if this iterator is at the end of uses list.
bool atEnd() const { return Op == 0; }
///
unsigned getNumOperands() const { return NumOperands; }
- /// getConstantOperandVal - Helper method returns the integer value of a
+ /// getConstantOperandVal - Helper method returns the integer value of a
/// ConstantSDNode operand.
uint64_t getConstantOperandVal(unsigned Num) const;
///
std::string getOperationName(const SelectionDAG *G = 0) const;
static const char* getIndexedModeName(ISD::MemIndexedMode AM);
+ void print_types(raw_ostream &OS, const SelectionDAG *G) const;
+ void print_details(raw_ostream &OS, const SelectionDAG *G) const;
void print(raw_ostream &OS, const SelectionDAG *G = 0) const;
+ void printr(raw_ostream &OS, const SelectionDAG *G = 0) const;
void dump() const;
+ void dumpr() const;
void dump(const SelectionDAG *G) const;
static bool classof(const SDNode *) { return true; }
return Ret;
}
- /// The constructors that supply DebugLoc explicitly should be preferred
- /// for new code.
- SDNode(unsigned Opc, SDVTList VTs, const SDValue *Ops, unsigned NumOps)
- : NodeType(Opc), OperandsNeedDelete(true), SubclassData(0),
- NodeId(-1), debugLoc(DebugLoc::getUnknownLoc()),
- OperandList(NumOps ? new SDUse[NumOps] : 0),
- ValueList(VTs.VTs),
- NumOperands(NumOps), NumValues(VTs.NumVTs),
- UseList(NULL) {
- for (unsigned i = 0; i != NumOps; ++i) {
- OperandList[i].setUser(this);
- OperandList[i].setInitial(Ops[i]);
- }
- }
-
- /// This constructor adds no operands itself; operands can be
- /// set later with InitOperands.
- SDNode(unsigned Opc, SDVTList VTs)
- : NodeType(Opc), OperandsNeedDelete(false), SubclassData(0),
- NodeId(-1), debugLoc(DebugLoc::getUnknownLoc()), OperandList(0),
- ValueList(VTs.VTs), NumOperands(0), NumValues(VTs.NumVTs),
- UseList(NULL) {}
-
- /// The next two constructors specify DebugLoc explicitly; the intent
- /// is that they will replace the above two over time, and eventually
- /// the ones above can be removed.
- SDNode(unsigned Opc, const DebugLoc dl, SDVTList VTs, const SDValue *Ops,
+ SDNode(unsigned Opc, const DebugLoc dl, SDVTList VTs, const SDValue *Ops,
unsigned NumOps)
: NodeType(Opc), OperandsNeedDelete(true), SubclassData(0),
- NodeId(-1), debugLoc(dl),
+ NodeId(-1),
OperandList(NumOps ? new SDUse[NumOps] : 0),
- ValueList(VTs.VTs),
+ ValueList(VTs.VTs), UseList(NULL),
NumOperands(NumOps), NumValues(VTs.NumVTs),
- UseList(NULL) {
+ debugLoc(dl) {
for (unsigned i = 0; i != NumOps; ++i) {
OperandList[i].setUser(this);
OperandList[i].setInitial(Ops[i]);
/// set later with InitOperands.
SDNode(unsigned Opc, const DebugLoc dl, SDVTList VTs)
: NodeType(Opc), OperandsNeedDelete(false), SubclassData(0),
- NodeId(-1), debugLoc(dl), OperandList(0),
- ValueList(VTs.VTs), NumOperands(0), NumValues(VTs.NumVTs),
- UseList(NULL) {}
-
+ NodeId(-1), OperandList(0), ValueList(VTs.VTs), UseList(NULL),
+ NumOperands(0), NumValues(VTs.NumVTs),
+ debugLoc(dl) {}
+
/// InitOperands - Initialize the operands list of this with 1 operand.
void InitOperands(SDUse *Ops, const SDValue &Op0) {
Ops[0].setUser(this);
class UnarySDNode : public SDNode {
SDUse Op;
public:
- UnarySDNode(unsigned Opc, SDVTList VTs, SDValue X)
- : SDNode(Opc, VTs) {
+ UnarySDNode(unsigned Opc, DebugLoc dl, SDVTList VTs, SDValue X)
+ : SDNode(Opc, dl, VTs) {
InitOperands(&Op, X);
}
};
class BinarySDNode : public SDNode {
SDUse Ops[2];
public:
- BinarySDNode(unsigned Opc, SDVTList VTs, SDValue X, SDValue Y)
- : SDNode(Opc, VTs) {
+ BinarySDNode(unsigned Opc, DebugLoc dl, SDVTList VTs, SDValue X, SDValue Y)
+ : SDNode(Opc, dl, VTs) {
InitOperands(Ops, X, Y);
}
};
class TernarySDNode : public SDNode {
SDUse Ops[3];
public:
- TernarySDNode(unsigned Opc, SDVTList VTs, SDValue X, SDValue Y,
+ TernarySDNode(unsigned Opc, DebugLoc dl, SDVTList VTs, SDValue X, SDValue Y,
SDValue Z)
- : SDNode(Opc, VTs) {
+ : SDNode(Opc, dl, VTs) {
InitOperands(Ops, X, Y, Z);
}
};
#else
explicit HandleSDNode(SDValue X)
#endif
- : SDNode(ISD::HANDLENODE, getSDVTList(MVT::Other)) {
+ : SDNode(ISD::HANDLENODE, DebugLoc::getUnknownLoc(),
+ getSDVTList(MVT::Other)) {
InitOperands(&Op, X);
}
- ~HandleSDNode();
+ ~HandleSDNode();
const SDValue &getValue() const { return Op; }
};
//! SVOffset - Memory location offset. Note that base is defined in MemSDNode
int SVOffset;
- /// Flags - the low bit indicates whether this is a volatile reference;
- /// the remainder is a log2 encoding of the alignment in bytes.
- unsigned Flags;
-
public:
- MemSDNode(unsigned Opc, SDVTList VTs, MVT MemoryVT,
+ MemSDNode(unsigned Opc, DebugLoc dl, SDVTList VTs, MVT MemoryVT,
const Value *srcValue, int SVOff,
unsigned alignment, bool isvolatile);
- MemSDNode(unsigned Opc, SDVTList VTs, const SDValue *Ops, unsigned NumOps,
- MVT MemoryVT, const Value *srcValue, int SVOff,
+ MemSDNode(unsigned Opc, DebugLoc dl, SDVTList VTs, const SDValue *Ops,
+ unsigned NumOps, MVT MemoryVT, const Value *srcValue, int SVOff,
unsigned alignment, bool isvolatile);
/// Returns alignment and volatility of the memory access
- unsigned getAlignment() const { return (1u << (Flags >> 1)) >> 1; }
- bool isVolatile() const { return Flags & 1; }
-
+ unsigned getAlignment() const { return (1u << (SubclassData >> 6)) >> 1; }
+ bool isVolatile() const { return (SubclassData >> 5) & 1; }
+
+ /// getRawSubclassData - Return the SubclassData value, which contains an
+ /// encoding of the alignment and volatile information, as well as bits
+ /// used by subclasses. This function should only be used to compute a
+ /// FoldingSetNodeID value.
+ unsigned getRawSubclassData() const {
+ return SubclassData;
+ }
+
/// Returns the SrcValue and offset that describes the location of the access
const Value *getSrcValue() const { return SrcValue; }
int getSrcValueOffset() const { return SVOffset; }
-
+
/// getMemoryVT - Return the type of the in-memory value.
MVT getMemoryVT() const { return MemoryVT; }
-
+
/// getMemOperand - Return a MachineMemOperand object describing the memory
/// reference performed by operation.
MachineMemOperand getMemOperand() const;
return getOperand(getOpcode() == ISD::STORE ? 2 : 1);
}
- /// getRawFlags - Represent the flags as a bunch of bits.
- ///
- unsigned getRawFlags() const { return Flags; }
-
// Methods to support isa and dyn_cast
static bool classof(const MemSDNode *) { return true; }
static bool classof(const SDNode *N) {
N->getOpcode() == ISD::INTRINSIC_W_CHAIN ||
N->getOpcode() == ISD::INTRINSIC_VOID ||
N->isTargetOpcode();
- }
+ }
};
/// AtomicSDNode - A SDNode reprenting atomic operations.
///
class AtomicSDNode : public MemSDNode {
SDUse Ops[4];
-
+
public:
// Opc: opcode for atomic
// VTL: value type list
// Swp: swap value
// SrcVal: address to update as a Value (used for MemOperand)
// Align: alignment of memory
- AtomicSDNode(unsigned Opc, SDVTList VTL, MVT MemVT,
+ AtomicSDNode(unsigned Opc, DebugLoc dl, SDVTList VTL, MVT MemVT,
SDValue Chain, SDValue Ptr,
SDValue Cmp, SDValue Swp, const Value* SrcVal,
unsigned Align=0)
- : MemSDNode(Opc, VTL, MemVT, SrcVal, /*SVOffset=*/0,
+ : MemSDNode(Opc, dl, VTL, MemVT, SrcVal, /*SVOffset=*/0,
Align, /*isVolatile=*/true) {
InitOperands(Ops, Chain, Ptr, Cmp, Swp);
}
- AtomicSDNode(unsigned Opc, SDVTList VTL, MVT MemVT,
- SDValue Chain, SDValue Ptr,
+ AtomicSDNode(unsigned Opc, DebugLoc dl, SDVTList VTL, MVT MemVT,
+ SDValue Chain, SDValue Ptr,
SDValue Val, const Value* SrcVal, unsigned Align=0)
- : MemSDNode(Opc, VTL, MemVT, SrcVal, /*SVOffset=*/0,
+ : MemSDNode(Opc, dl, VTL, MemVT, SrcVal, /*SVOffset=*/0,
Align, /*isVolatile=*/true) {
InitOperands(Ops, Chain, Ptr, Val);
}
-
+
const SDValue &getBasePtr() const { return getOperand(1); }
const SDValue &getVal() const { return getOperand(2); }
- bool isCompareAndSwap() const {
- unsigned Op = getOpcode();
+ bool isCompareAndSwap() const {
+ unsigned Op = getOpcode();
return Op == ISD::ATOMIC_CMP_SWAP;
}
bool ReadMem; // Intrinsic reads memory
bool WriteMem; // Intrinsic writes memory
public:
- MemIntrinsicSDNode(unsigned Opc, SDVTList VTs,
+ MemIntrinsicSDNode(unsigned Opc, DebugLoc dl, SDVTList VTs,
const SDValue *Ops, unsigned NumOps,
MVT MemoryVT, const Value *srcValue, int SVO,
unsigned Align, bool Vol, bool ReadMem, bool WriteMem)
- : MemSDNode(Opc, VTs, Ops, NumOps, MemoryVT, srcValue, SVO, Align, Vol),
+ : MemSDNode(Opc, dl, VTs, Ops, NumOps, MemoryVT, srcValue, SVO, Align, Vol),
ReadMem(ReadMem), WriteMem(WriteMem) {
}
protected:
friend class SelectionDAG;
ConstantSDNode(bool isTarget, const ConstantInt *val, MVT VT)
- : SDNode(isTarget ? ISD::TargetConstant : ISD::Constant, getSDVTList(VT)),
- Value(val) {
+ : SDNode(isTarget ? ISD::TargetConstant : ISD::Constant,
+ DebugLoc::getUnknownLoc(), getSDVTList(VT)), Value(val) {
}
public:
friend class SelectionDAG;
ConstantFPSDNode(bool isTarget, const ConstantFP *val, MVT VT)
: SDNode(isTarget ? ISD::TargetConstantFP : ISD::ConstantFP,
- getSDVTList(VT)), Value(val) {
+ DebugLoc::getUnknownLoc(), getSDVTList(VT)), Value(val) {
}
public:
/// two floating point values.
/// We leave the version with the double argument here because it's just so
- /// convenient to write "2.0" and the like. Without this function we'd
+ /// convenient to write "2.0" and the like. Without this function we'd
/// have to duplicate its logic everywhere it's called.
bool isExactlyValue(double V) const {
bool ignored;
static bool classof(const ConstantFPSDNode *) { return true; }
static bool classof(const SDNode *N) {
- return N->getOpcode() == ISD::ConstantFP ||
+ return N->getOpcode() == ISD::ConstantFP ||
N->getOpcode() == ISD::TargetConstantFP;
}
};
protected:
friend class SelectionDAG;
FrameIndexSDNode(int fi, MVT VT, bool isTarg)
- : SDNode(isTarg ? ISD::TargetFrameIndex : ISD::FrameIndex, getSDVTList(VT)),
- FI(fi) {
+ : SDNode(isTarg ? ISD::TargetFrameIndex : ISD::FrameIndex,
+ DebugLoc::getUnknownLoc(), getSDVTList(VT)), FI(fi) {
}
public:
protected:
friend class SelectionDAG;
JumpTableSDNode(int jti, MVT VT, bool isTarg)
- : SDNode(isTarg ? ISD::TargetJumpTable : ISD::JumpTable, getSDVTList(VT)),
- JTI(jti) {
+ : SDNode(isTarg ? ISD::TargetJumpTable : ISD::JumpTable,
+ DebugLoc::getUnknownLoc(), getSDVTList(VT)), JTI(jti) {
}
public:
-
+
int getIndex() const { return JTI; }
-
+
static bool classof(const JumpTableSDNode *) { return true; }
static bool classof(const SDNode *N) {
return N->getOpcode() == ISD::JumpTable ||
MachineConstantPoolValue *MachineCPVal;
} Val;
int Offset; // It's a MachineConstantPoolValue if top bit is set.
- unsigned Alignment;
+ unsigned Alignment; // Minimum alignment requirement of CP (not log2 value).
protected:
friend class SelectionDAG;
ConstantPoolSDNode(bool isTarget, Constant *c, MVT VT, int o=0)
: SDNode(isTarget ? ISD::TargetConstantPool : ISD::ConstantPool,
+ DebugLoc::getUnknownLoc(),
getSDVTList(VT)), Offset(o), Alignment(0) {
assert((int)Offset >= 0 && "Offset is too large");
Val.ConstVal = c;
}
ConstantPoolSDNode(bool isTarget, Constant *c, MVT VT, int o, unsigned Align)
- : SDNode(isTarget ? ISD::TargetConstantPool : ISD::ConstantPool,
+ : SDNode(isTarget ? ISD::TargetConstantPool : ISD::ConstantPool,
+ DebugLoc::getUnknownLoc(),
getSDVTList(VT)), Offset(o), Alignment(Align) {
assert((int)Offset >= 0 && "Offset is too large");
Val.ConstVal = c;
}
ConstantPoolSDNode(bool isTarget, MachineConstantPoolValue *v,
MVT VT, int o=0)
- : SDNode(isTarget ? ISD::TargetConstantPool : ISD::ConstantPool,
+ : SDNode(isTarget ? ISD::TargetConstantPool : ISD::ConstantPool,
+ DebugLoc::getUnknownLoc(),
getSDVTList(VT)), Offset(o), Alignment(0) {
assert((int)Offset >= 0 && "Offset is too large");
Val.MachineCPVal = v;
- Offset |= 1 << (sizeof(unsigned)*8-1);
+ Offset |= 1 << (sizeof(unsigned)*CHAR_BIT-1);
}
ConstantPoolSDNode(bool isTarget, MachineConstantPoolValue *v,
MVT VT, int o, unsigned Align)
: SDNode(isTarget ? ISD::TargetConstantPool : ISD::ConstantPool,
+ DebugLoc::getUnknownLoc(),
getSDVTList(VT)), Offset(o), Alignment(Align) {
assert((int)Offset >= 0 && "Offset is too large");
Val.MachineCPVal = v;
- Offset |= 1 << (sizeof(unsigned)*8-1);
+ Offset |= 1 << (sizeof(unsigned)*CHAR_BIT-1);
}
public:
}
int getOffset() const {
- return Offset & ~(1 << (sizeof(unsigned)*8-1));
+ return Offset & ~(1 << (sizeof(unsigned)*CHAR_BIT-1));
}
-
+
// Return the alignment of this constant pool object, which is either 0 (for
- // default alignment) or log2 of the desired value.
+ // default alignment) or the desired value.
unsigned getAlignment() const { return Alignment; }
const Type *getType() const;
MachineBasicBlock *MBB;
protected:
friend class SelectionDAG;
+ /// Debug info is meaningful and potentially useful here, but we create
+ /// blocks out of order when they're jumped to, which makes it a bit
+ /// harder. Let's see if we need it first.
explicit BasicBlockSDNode(MachineBasicBlock *mbb)
- : SDNode(ISD::BasicBlock, getSDVTList(MVT::Other)), MBB(mbb) {
+ : SDNode(ISD::BasicBlock, DebugLoc::getUnknownLoc(),
+ getSDVTList(MVT::Other)), MBB(mbb) {
}
public:
}
};
+/// BuildVectorSDNode - A "pseudo-class" with methods for operating on
+/// BUILD_VECTORs.
+class BuildVectorSDNode : public SDNode {
+ // These are constructed as SDNodes and then cast to BuildVectorSDNodes.
+ explicit BuildVectorSDNode(); // Do not implement
+public:
+ /// isConstantSplat - Check if this is a constant splat, and if so, find the
+ /// smallest element size that splats the vector. If MinSplatBits is
+ /// nonzero, the element size must be at least that large. Note that the
+ /// splat element may be the entire vector (i.e., a one element vector).
+ /// Returns the splat element value in SplatValue. Any undefined bits in
+ /// that value are zero, and the corresponding bits in the SplatUndef mask
+ /// are set. The SplatBitSize value is set to the splat element size in
+ /// bits. HasAnyUndefs is set to true if any bits in the vector are
+ /// undefined.
+ bool isConstantSplat(APInt &SplatValue, APInt &SplatUndef,
+ unsigned &SplatBitSize, bool &HasAnyUndefs,
+ unsigned MinSplatBits = 0);
+
+ static inline bool classof(const BuildVectorSDNode *) { return true; }
+ static inline bool classof(const SDNode *N) {
+ return N->getOpcode() == ISD::BUILD_VECTOR;
+ }
+};
+
/// SrcValueSDNode - An SDNode that holds an arbitrary LLVM IR Value. This is
/// used when the SelectionDAG needs to make a simple reference to something
/// in the LLVM IR representation.
friend class SelectionDAG;
/// Create a SrcValue for a general value.
explicit SrcValueSDNode(const Value *v)
- : SDNode(ISD::SRCVALUE, getSDVTList(MVT::Other)), V(v) {}
+ : SDNode(ISD::SRCVALUE, DebugLoc::getUnknownLoc(),
+ getSDVTList(MVT::Other)), V(v) {}
public:
/// getValue - return the contained Value.
friend class SelectionDAG;
/// Create a MachineMemOperand node
explicit MemOperandSDNode(const MachineMemOperand &mo)
- : SDNode(ISD::MEMOPERAND, getSDVTList(MVT::Other)), MO(mo) {}
+ : SDNode(ISD::MEMOPERAND, DebugLoc::getUnknownLoc(),
+ getSDVTList(MVT::Other)), MO(mo) {}
public:
/// MO - The contained MachineMemOperand.
protected:
friend class SelectionDAG;
RegisterSDNode(unsigned reg, MVT VT)
- : SDNode(ISD::Register, getSDVTList(VT)), Reg(reg) {
+ : SDNode(ISD::Register, DebugLoc::getUnknownLoc(),
+ getSDVTList(VT)), Reg(reg) {
}
public:
friend class SelectionDAG;
DbgStopPointSDNode(SDValue ch, unsigned l, unsigned c,
Value *cu)
- : SDNode(ISD::DBG_STOPPOINT, getSDVTList(MVT::Other)),
- Line(l), Column(c), CU(cu) {
+ : SDNode(ISD::DBG_STOPPOINT, DebugLoc::getUnknownLoc(),
+ getSDVTList(MVT::Other)), Line(l), Column(c), CU(cu) {
InitOperands(&Chain, ch);
}
public:
unsigned LabelID;
protected:
friend class SelectionDAG;
- LabelSDNode(unsigned NodeTy, SDValue ch, unsigned id)
- : SDNode(NodeTy, getSDVTList(MVT::Other)), LabelID(id) {
+LabelSDNode(unsigned NodeTy, DebugLoc dl, SDValue ch, unsigned id)
+ : SDNode(NodeTy, dl, getSDVTList(MVT::Other)), LabelID(id) {
InitOperands(&Chain, ch);
}
public:
friend class SelectionDAG;
ExternalSymbolSDNode(bool isTarget, const char *Sym, MVT VT)
: SDNode(isTarget ? ISD::TargetExternalSymbol : ISD::ExternalSymbol,
+ DebugLoc::getUnknownLoc(),
getSDVTList(VT)), Symbol(Sym) {
}
public:
protected:
friend class SelectionDAG;
explicit CondCodeSDNode(ISD::CondCode Cond)
- : SDNode(ISD::CONDCODE, getSDVTList(MVT::Other)), Condition(Cond) {
+ : SDNode(ISD::CONDCODE, DebugLoc::getUnknownLoc(),
+ getSDVTList(MVT::Other)), Condition(Cond) {
}
public:
ISD::CvtCode CvtCode;
protected:
friend class SelectionDAG;
- explicit CvtRndSatSDNode(MVT VT, const SDValue *Ops, unsigned NumOps,
- ISD::CvtCode Code)
- : SDNode(ISD::CONVERT_RNDSAT, getSDVTList(VT), Ops, NumOps), CvtCode(Code) {
+ explicit CvtRndSatSDNode(MVT VT, DebugLoc dl, const SDValue *Ops,
+ unsigned NumOps, ISD::CvtCode Code)
+ : SDNode(ISD::CONVERT_RNDSAT, dl, getSDVTList(VT), Ops, NumOps),
+ CvtCode(Code) {
assert(NumOps == 5 && "wrong number of operations");
}
public:
void setNest() { Flags |= One << NestOffs; }
unsigned getByValAlign() const {
- return (unsigned)
+ return (unsigned)
((One << ((Flags & ByValAlign) >> ByValAlignOffs)) / 2);
}
void setByValAlign(unsigned A) {
Flags = (Flags & ~ByValAlign) |
(uint64_t(Log2_32(A) + 1) << ByValAlignOffs);
}
-
+
bool isSplit() const { return Flags & Split; }
void setSplit() { Flags |= One << SplitOffs; }
protected:
friend class SelectionDAG;
explicit ARG_FLAGSSDNode(ISD::ArgFlagsTy Flags)
- : SDNode(ISD::ARG_FLAGS, getSDVTList(MVT::Other)), TheFlags(Flags) {
+ : SDNode(ISD::ARG_FLAGS, DebugLoc::getUnknownLoc(),
+ getSDVTList(MVT::Other)), TheFlags(Flags) {
}
public:
ISD::ArgFlagsTy getArgFlags() const { return TheFlags; }
bool Inreg;
protected:
friend class SelectionDAG;
- CallSDNode(unsigned cc, bool isvararg, bool istailcall, bool isinreg,
- SDVTList VTs, const SDValue *Operands, unsigned numOperands)
- : SDNode(ISD::CALL, VTs, Operands, numOperands),
+ CallSDNode(unsigned cc, DebugLoc dl, bool isvararg, bool istailcall,
+ bool isinreg, SDVTList VTs, const SDValue *Operands,
+ unsigned numOperands)
+ : SDNode(ISD::CALL, dl, VTs, Operands, numOperands),
CallingConv(cc), IsVarArg(isvararg), IsTailCall(istailcall),
Inreg(isinreg) {}
public:
protected:
friend class SelectionDAG;
explicit VTSDNode(MVT VT)
- : SDNode(ISD::VALUETYPE, getSDVTList(MVT::Other)), ValueType(VT) {
+ : SDNode(ISD::VALUETYPE, DebugLoc::getUnknownLoc(),
+ getSDVTList(MVT::Other)), ValueType(VT) {
}
public:
*/
SDUse Ops[4];
public:
- LSBaseSDNode(ISD::NodeType NodeTy, SDValue *Operands, unsigned numOperands,
- SDVTList VTs, ISD::MemIndexedMode AM, MVT VT,
- const Value *SV, int SVO, unsigned Align, bool Vol)
- : MemSDNode(NodeTy, VTs, VT, SV, SVO, Align, Vol) {
- SubclassData = AM;
- InitOperands(Ops, Operands, numOperands);
+ LSBaseSDNode(ISD::NodeType NodeTy, DebugLoc dl, SDValue *Operands,
+ unsigned numOperands, SDVTList VTs, ISD::MemIndexedMode AM,
+ MVT VT, const Value *SV, int SVO, unsigned Align, bool Vol)
+ : MemSDNode(NodeTy, dl, VTs, VT, SV, SVO, Align, Vol) {
assert(Align != 0 && "Loads and stores should have non-zero aligment");
+ SubclassData |= AM << 2;
+ assert(getAddressingMode() == AM && "MemIndexedMode encoding error!");
+ InitOperands(Ops, Operands, numOperands);
assert((getOffset().getOpcode() == ISD::UNDEF || isIndexed()) &&
"Only indexed loads and stores have a non-undef offset operand");
}
/// getAddressingMode - Return the addressing mode for this load or store:
/// unindexed, pre-inc, pre-dec, post-inc, or post-dec.
ISD::MemIndexedMode getAddressingMode() const {
- return ISD::MemIndexedMode(SubclassData & 7);
+ return ISD::MemIndexedMode((SubclassData >> 2) & 7);
}
/// isIndexed - Return true if this is a pre/post inc/dec load/store.
class LoadSDNode : public LSBaseSDNode {
protected:
friend class SelectionDAG;
- LoadSDNode(SDValue *ChainPtrOff, SDVTList VTs,
+ LoadSDNode(SDValue *ChainPtrOff, DebugLoc dl, SDVTList VTs,
ISD::MemIndexedMode AM, ISD::LoadExtType ETy, MVT LVT,
const Value *SV, int O=0, unsigned Align=0, bool Vol=false)
- : LSBaseSDNode(ISD::LOAD, ChainPtrOff, 3,
+ : LSBaseSDNode(ISD::LOAD, dl, ChainPtrOff, 3,
VTs, AM, LVT, SV, O, Align, Vol) {
- SubclassData |= (unsigned short)ETy << 3;
+ SubclassData |= (unsigned short)ETy;
+ assert(getExtensionType() == ETy && "LoadExtType encoding error!");
}
public:
/// getExtensionType - Return whether this is a plain node,
/// or one of the varieties of value-extending loads.
ISD::LoadExtType getExtensionType() const {
- return ISD::LoadExtType((SubclassData >> 3) & 3);
+ return ISD::LoadExtType(SubclassData & 3);
}
const SDValue &getBasePtr() const { return getOperand(1); }
const SDValue &getOffset() const { return getOperand(2); }
-
+
static bool classof(const LoadSDNode *) { return true; }
static bool classof(const SDNode *N) {
return N->getOpcode() == ISD::LOAD;
class StoreSDNode : public LSBaseSDNode {
protected:
friend class SelectionDAG;
- StoreSDNode(SDValue *ChainValuePtrOff, SDVTList VTs,
+ StoreSDNode(SDValue *ChainValuePtrOff, DebugLoc dl, SDVTList VTs,
ISD::MemIndexedMode AM, bool isTrunc, MVT SVT,
const Value *SV, int O=0, unsigned Align=0, bool Vol=false)
- : LSBaseSDNode(ISD::STORE, ChainValuePtrOff, 4,
+ : LSBaseSDNode(ISD::STORE, dl, ChainValuePtrOff, 4,
VTs, AM, SVT, SV, O, Align, Vol) {
- SubclassData |= (unsigned short)isTrunc << 3;
+ SubclassData |= (unsigned short)isTrunc;
+ assert(isTruncatingStore() == isTrunc && "isTrunc encoding error!");
}
public:
/// isTruncatingStore - Return true if the op does a truncation before store.
/// For integers this is the same as doing a TRUNCATE and storing the result.
/// For floats, it is the same as doing an FP_ROUND and storing the result.
- bool isTruncatingStore() const { return (SubclassData >> 3) & 1; }
+ bool isTruncatingStore() const { return SubclassData & 1; }
const SDValue &getValue() const { return getOperand(1); }
const SDValue &getBasePtr() const { return getOperand(2); }
const SDValue &getOffset() const { return getOperand(3); }
-
+
static bool classof(const StoreSDNode *) { return true; }
static bool classof(const SDNode *N) {
return N->getOpcode() == ISD::STORE;
projects / oota-llvm.git / blobdiff