#include "llvm/ADT/ilist_node.h"
#include "llvm/ADT/SmallVector.h"
#include "llvm/ADT/STLExtras.h"
+#include "llvm/CodeGen/ISDOpcodes.h"
#include "llvm/CodeGen/ValueTypes.h"
#include "llvm/CodeGen/MachineMemOperand.h"
#include "llvm/Support/MathExtras.h"
class MachineConstantPoolValue;
class SDNode;
class Value;
+class MCSymbol;
template <typename T> struct DenseMapInfo;
template <typename T> struct simplify_type;
template <typename T> struct ilist_traits;
unsigned int NumVTs;
};
-/// ISD namespace - This namespace contains an enum which represents all of the
-/// SelectionDAG node types and value types.
-///
namespace ISD {
-
- //===--------------------------------------------------------------------===//
- /// ISD::NodeType enum - This enum defines the target-independent operators
- /// for a SelectionDAG.
- ///
- /// Targets may also define target-dependent operator codes for SDNodes. For
- /// example, on x86, these are the enum values in the X86ISD namespace.
- /// Targets should aim to use target-independent operators to model their
- /// instruction sets as much as possible, and only use target-dependent
- /// operators when they have special requirements.
- ///
- /// Finally, during and after selection proper, SNodes may use special
- /// operator codes that correspond directly with MachineInstr opcodes. These
- /// are used to represent selected instructions. See the isMachineOpcode()
- /// and getMachineOpcode() member functions of SDNode.
- ///
- enum NodeType {
- // DELETED_NODE - This is an illegal value that is used to catch
- // errors. This opcode is not a legal opcode for any node.
- DELETED_NODE,
-
- // EntryToken - This is the marker used to indicate the start of the region.
- EntryToken,
-
- // TokenFactor - This node takes multiple tokens as input and produces a
- // single token result. This is used to represent the fact that the operand
- // operators are independent of each other.
- TokenFactor,
-
- // AssertSext, AssertZext - These nodes record if a register contains a
- // value that has already been zero or sign extended from a narrower type.
- // These nodes take two operands. The first is the node that has already
- // been extended, and the second is a value type node indicating the width
- // of the extension
- AssertSext, AssertZext,
-
- // Various leaf nodes.
- BasicBlock, VALUETYPE, CONDCODE, Register,
- Constant, ConstantFP,
- GlobalAddress, GlobalTLSAddress, FrameIndex,
- JumpTable, ConstantPool, ExternalSymbol, BlockAddress,
-
- // The address of the GOT
- GLOBAL_OFFSET_TABLE,
-
- // FRAMEADDR, RETURNADDR - These nodes represent llvm.frameaddress and
- // llvm.returnaddress on the DAG. These nodes take one operand, the index
- // of the frame or return address to return. An index of zero corresponds
- // to the current function's frame or return address, an index of one to the
- // parent's frame or return address, and so on.
- FRAMEADDR, RETURNADDR,
-
- // FRAME_TO_ARGS_OFFSET - This node represents offset from frame pointer to
- // first (possible) on-stack argument. This is needed for correct stack
- // adjustment during unwind.
- FRAME_TO_ARGS_OFFSET,
-
- // RESULT, OUTCHAIN = EXCEPTIONADDR(INCHAIN) - This node represents the
- // address of the exception block on entry to an landing pad block.
- EXCEPTIONADDR,
-
- // RESULT, OUTCHAIN = LSDAADDR(INCHAIN) - This node represents the
- // address of the Language Specific Data Area for the enclosing function.
- LSDAADDR,
-
- // RESULT, OUTCHAIN = EHSELECTION(INCHAIN, EXCEPTION) - This node represents
- // the selection index of the exception thrown.
- EHSELECTION,
-
- // OUTCHAIN = EH_RETURN(INCHAIN, OFFSET, HANDLER) - This node represents
- // 'eh_return' gcc dwarf builtin, which is used to return from
- // exception. The general meaning is: adjust stack by OFFSET and pass
- // execution to HANDLER. Many platform-related details also :)
- EH_RETURN,
-
- // TargetConstant* - Like Constant*, but the DAG does not do any folding or
- // simplification of the constant.
- TargetConstant,
- TargetConstantFP,
-
- // TargetGlobalAddress - Like GlobalAddress, but the DAG does no folding or
- // anything else with this node, and this is valid in the target-specific
- // dag, turning into a GlobalAddress operand.
- TargetGlobalAddress,
- TargetGlobalTLSAddress,
- TargetFrameIndex,
- TargetJumpTable,
- TargetConstantPool,
- TargetExternalSymbol,
- TargetBlockAddress,
-
- /// RESULT = INTRINSIC_WO_CHAIN(INTRINSICID, arg1, arg2, ...)
- /// This node represents a target intrinsic function with no side effects.
- /// The first operand is the ID number of the intrinsic from the
- /// llvm::Intrinsic namespace. The operands to the intrinsic follow. The
- /// node has returns the result of the intrinsic.
- INTRINSIC_WO_CHAIN,
-
- /// RESULT,OUTCHAIN = INTRINSIC_W_CHAIN(INCHAIN, INTRINSICID, arg1, ...)
- /// This node represents a target intrinsic function with side effects that
- /// returns a result. The first operand is a chain pointer. The second is
- /// the ID number of the intrinsic from the llvm::Intrinsic namespace. The
- /// operands to the intrinsic follow. The node has two results, the result
- /// of the intrinsic and an output chain.
- INTRINSIC_W_CHAIN,
-
- /// OUTCHAIN = INTRINSIC_VOID(INCHAIN, INTRINSICID, arg1, arg2, ...)
- /// This node represents a target intrinsic function with side effects that
- /// does not return a result. The first operand is a chain pointer. The
- /// second is the ID number of the intrinsic from the llvm::Intrinsic
- /// namespace. The operands to the intrinsic follow.
- INTRINSIC_VOID,
-
- // CopyToReg - This node has three operands: a chain, a register number to
- // set to this value, and a value.
- CopyToReg,
-
- // CopyFromReg - This node indicates that the input value is a virtual or
- // physical register that is defined outside of the scope of this
- // SelectionDAG. The register is available from the RegisterSDNode object.
- CopyFromReg,
-
- // UNDEF - An undefined node
- UNDEF,
-
- // EXTRACT_ELEMENT - This is used to get the lower or upper (determined by
- // a Constant, which is required to be operand #1) half of the integer or
- // float value specified as operand #0. This is only for use before
- // legalization, for values that will be broken into multiple registers.
- EXTRACT_ELEMENT,
-
- // BUILD_PAIR - This is the opposite of EXTRACT_ELEMENT in some ways. Given
- // two values of the same integer value type, this produces a value twice as
- // big. Like EXTRACT_ELEMENT, this can only be used before legalization.
- BUILD_PAIR,
-
- // MERGE_VALUES - This node takes multiple discrete operands and returns
- // them all as its individual results. This nodes has exactly the same
- // number of inputs and outputs. This node is useful for some pieces of the
- // code generator that want to think about a single node with multiple
- // results, not multiple nodes.
- MERGE_VALUES,
-
- // Simple integer binary arithmetic operators.
- ADD, SUB, MUL, SDIV, UDIV, SREM, UREM,
-
- // SMUL_LOHI/UMUL_LOHI - Multiply two integers of type iN, producing
- // a signed/unsigned value of type i[2*N], and return the full value as
- // two results, each of type iN.
- SMUL_LOHI, UMUL_LOHI,
-
- // SDIVREM/UDIVREM - Divide two integers and produce both a quotient and
- // remainder result.
- SDIVREM, UDIVREM,
-
- // CARRY_FALSE - This node is used when folding other nodes,
- // like ADDC/SUBC, which indicate the carry result is always false.
- CARRY_FALSE,
-
- // Carry-setting nodes for multiple precision addition and subtraction.
- // These nodes take two operands of the same value type, and produce two
- // results. The first result is the normal add or sub result, the second
- // result is the carry flag result.
- ADDC, SUBC,
-
- // Carry-using nodes for multiple precision addition and subtraction. These
- // nodes take three operands: The first two are the normal lhs and rhs to
- // the add or sub, and the third is the input carry flag. These nodes
- // produce two results; the normal result of the add or sub, and the output
- // carry flag. These nodes both read and write a carry flag to allow them
- // to them to be chained together for add and sub of arbitrarily large
- // values.
- ADDE, SUBE,
-
- // RESULT, BOOL = [SU]ADDO(LHS, RHS) - Overflow-aware nodes for addition.
- // These nodes take two operands: the normal LHS and RHS to the add. They
- // produce two results: the normal result of the add, and a boolean that
- // indicates if an overflow occured (*not* a flag, because it may be stored
- // to memory, etc.). If the type of the boolean is not i1 then the high
- // bits conform to getBooleanContents.
- // These nodes are generated from the llvm.[su]add.with.overflow intrinsics.
- SADDO, UADDO,
-
- // Same for subtraction
- SSUBO, USUBO,
-
- // Same for multiplication
- SMULO, UMULO,
-
- // Simple binary floating point operators.
- FADD, FSUB, FMUL, FDIV, FREM,
-
- // FCOPYSIGN(X, Y) - Return the value of X with the sign of Y. NOTE: This
- // DAG node does not require that X and Y have the same type, just that they
- // are both floating point. X and the result must have the same type.
- // FCOPYSIGN(f32, f64) is allowed.
- FCOPYSIGN,
-
- // INT = FGETSIGN(FP) - Return the sign bit of the specified floating point
- // value as an integer 0/1 value.
- FGETSIGN,
-
- /// BUILD_VECTOR(ELT0, ELT1, ELT2, ELT3,...) - Return a vector with the
- /// specified, possibly variable, elements. The number of elements is
- /// required to be a power of two. The types of the operands must all be
- /// the same and must match the vector element type, except that integer
- /// types are allowed to be larger than the element type, in which case
- /// the operands are implicitly truncated.
- BUILD_VECTOR,
-
- /// INSERT_VECTOR_ELT(VECTOR, VAL, IDX) - Returns VECTOR with the element
- /// at IDX replaced with VAL. If the type of VAL is larger than the vector
- /// element type then VAL is truncated before replacement.
- INSERT_VECTOR_ELT,
-
- /// EXTRACT_VECTOR_ELT(VECTOR, IDX) - Returns a single element from VECTOR
- /// identified by the (potentially variable) element number IDX. If the
- /// return type is an integer type larger than the element type of the
- /// vector, the result is extended to the width of the return type.
- EXTRACT_VECTOR_ELT,
-
- /// CONCAT_VECTORS(VECTOR0, VECTOR1, ...) - Given a number of values of
- /// vector type with the same length and element type, this produces a
- /// concatenated vector result value, with length equal to the sum of the
- /// lengths of the input vectors.
- CONCAT_VECTORS,
-
- /// EXTRACT_SUBVECTOR(VECTOR, IDX) - Returns a subvector from VECTOR (an
- /// vector value) starting with the (potentially variable) element number
- /// IDX, which must be a multiple of the result vector length.
- EXTRACT_SUBVECTOR,
-
- /// VECTOR_SHUFFLE(VEC1, VEC2) - Returns a vector, of the same type as
- /// VEC1/VEC2. A VECTOR_SHUFFLE node also contains an array of constant int
- /// values that indicate which value (or undef) each result element will
- /// get. These constant ints are accessible through the
- /// ShuffleVectorSDNode class. This is quite similar to the Altivec
- /// 'vperm' instruction, except that the indices must be constants and are
- /// in terms of the element size of VEC1/VEC2, not in terms of bytes.
- VECTOR_SHUFFLE,
-
- /// SCALAR_TO_VECTOR(VAL) - This represents the operation of loading a
- /// scalar value into element 0 of the resultant vector type. The top
- /// elements 1 to N-1 of the N-element vector are undefined. The type
- /// of the operand must match the vector element type, except when they
- /// are integer types. In this case the operand is allowed to be wider
- /// than the vector element type, and is implicitly truncated to it.
- SCALAR_TO_VECTOR,
-
- // MULHU/MULHS - Multiply high - Multiply two integers of type iN, producing
- // an unsigned/signed value of type i[2*N], then return the top part.
- MULHU, MULHS,
-
- // Bitwise operators - logical and, logical or, logical xor, shift left,
- // shift right algebraic (shift in sign bits), shift right logical (shift in
- // zeroes), rotate left, rotate right, and byteswap.
- AND, OR, XOR, SHL, SRA, SRL, ROTL, ROTR, BSWAP,
-
- // Counting operators
- CTTZ, CTLZ, CTPOP,
-
- // Select(COND, TRUEVAL, FALSEVAL). If the type of the boolean COND is not
- // i1 then the high bits must conform to getBooleanContents.
- SELECT,
-
- // Select with condition operator - This selects between a true value and
- // a false value (ops #2 and #3) based on the boolean result of comparing
- // the lhs and rhs (ops #0 and #1) of a conditional expression with the
- // condition code in op #4, a CondCodeSDNode.
- SELECT_CC,
-
- // SetCC operator - This evaluates to a true value iff the condition is
- // true. If the result value type is not i1 then the high bits conform
- // to getBooleanContents. The operands to this are the left and right
- // operands to compare (ops #0, and #1) and the condition code to compare
- // them with (op #2) as a CondCodeSDNode.
- SETCC,
-
- // RESULT = VSETCC(LHS, RHS, COND) operator - This evaluates to a vector of
- // integer elements with all bits of the result elements set to true if the
- // comparison is true or all cleared if the comparison is false. The
- // operands to this are the left and right operands to compare (LHS/RHS) and
- // the condition code to compare them with (COND) as a CondCodeSDNode.
- VSETCC,
-
- // SHL_PARTS/SRA_PARTS/SRL_PARTS - These operators are used for expanded
- // integer shift operations, just like ADD/SUB_PARTS. The operation
- // ordering is:
- // [Lo,Hi] = op [LoLHS,HiLHS], Amt
- SHL_PARTS, SRA_PARTS, SRL_PARTS,
-
- // Conversion operators. These are all single input single output
- // operations. For all of these, the result type must be strictly
- // wider or narrower (depending on the operation) than the source
- // type.
-
- // SIGN_EXTEND - Used for integer types, replicating the sign bit
- // into new bits.
- SIGN_EXTEND,
-
- // ZERO_EXTEND - Used for integer types, zeroing the new bits.
- ZERO_EXTEND,
-
- // ANY_EXTEND - Used for integer types. The high bits are undefined.
- ANY_EXTEND,
-
- // TRUNCATE - Completely drop the high bits.
- TRUNCATE,
-
- // [SU]INT_TO_FP - These operators convert integers (whose interpreted sign
- // depends on the first letter) to floating point.
- SINT_TO_FP,
- UINT_TO_FP,
-
- // SIGN_EXTEND_INREG - This operator atomically performs a SHL/SRA pair to
- // sign extend a small value in a large integer register (e.g. sign
- // extending the low 8 bits of a 32-bit register to fill the top 24 bits
- // with the 7th bit). The size of the smaller type is indicated by the 1th
- // operand, a ValueType node.
- SIGN_EXTEND_INREG,
-
- /// FP_TO_[US]INT - Convert a floating point value to a signed or unsigned
- /// integer.
- FP_TO_SINT,
- FP_TO_UINT,
-
- /// X = FP_ROUND(Y, TRUNC) - Rounding 'Y' from a larger floating point type
- /// down to the precision of the destination VT. TRUNC is a flag, which is
- /// always an integer that is zero or one. If TRUNC is 0, this is a
- /// normal rounding, if it is 1, this FP_ROUND is known to not change the
- /// value of Y.
- ///
- /// The TRUNC = 1 case is used in cases where we know that the value will
- /// not be modified by the node, because Y is not using any of the extra
- /// precision of source type. This allows certain transformations like
- /// FP_EXTEND(FP_ROUND(X,1)) -> X which are not safe for
- /// FP_EXTEND(FP_ROUND(X,0)) because the extra bits aren't removed.
- FP_ROUND,
-
- // FLT_ROUNDS_ - Returns current rounding mode:
- // -1 Undefined
- // 0 Round to 0
- // 1 Round to nearest
- // 2 Round to +inf
- // 3 Round to -inf
- FLT_ROUNDS_,
-
- /// X = FP_ROUND_INREG(Y, VT) - This operator takes an FP register, and
- /// rounds it to a floating point value. It then promotes it and returns it
- /// in a register of the same size. This operation effectively just
- /// discards excess precision. The type to round down to is specified by
- /// the VT operand, a VTSDNode.
- FP_ROUND_INREG,
-
- /// X = FP_EXTEND(Y) - Extend a smaller FP type into a larger FP type.
- FP_EXTEND,
-
- // BIT_CONVERT - This operator converts between integer, vector and FP
- // values, as if the value was stored to memory with one type and loaded
- // from the same address with the other type (or equivalently for vector
- // format conversions, etc). The source and result are required to have
- // the same bit size (e.g. f32 <-> i32). This can also be used for
- // int-to-int or fp-to-fp conversions, but that is a noop, deleted by
- // getNode().
- BIT_CONVERT,
-
- // CONVERT_RNDSAT - This operator is used to support various conversions
- // between various types (float, signed, unsigned and vectors of those
- // types) with rounding and saturation. NOTE: Avoid using this operator as
- // most target don't support it and the operator might be removed in the
- // future. It takes the following arguments:
- // 0) value
- // 1) dest type (type to convert to)
- // 2) src type (type to convert from)
- // 3) rounding imm
- // 4) saturation imm
- // 5) ISD::CvtCode indicating the type of conversion to do
- CONVERT_RNDSAT,
-
- // FNEG, FABS, FSQRT, FSIN, FCOS, FPOWI, FPOW,
- // FLOG, FLOG2, FLOG10, FEXP, FEXP2,
- // FCEIL, FTRUNC, FRINT, FNEARBYINT, FFLOOR - Perform various unary floating
- // point operations. These are inspired by libm.
- FNEG, FABS, FSQRT, FSIN, FCOS, FPOWI, FPOW,
- FLOG, FLOG2, FLOG10, FEXP, FEXP2,
- FCEIL, FTRUNC, FRINT, FNEARBYINT, FFLOOR,
-
- // LOAD and STORE have token chains as their first operand, then the same
- // operands as an LLVM load/store instruction, then an offset node that
- // is added / subtracted from the base pointer to form the address (for
- // indexed memory ops).
- LOAD, STORE,
-
- // DYNAMIC_STACKALLOC - Allocate some number of bytes on the stack aligned
- // to a specified boundary. This node always has two return values: a new
- // stack pointer value and a chain. The first operand is the token chain,
- // the second is the number of bytes to allocate, and the third is the
- // alignment boundary. The size is guaranteed to be a multiple of the stack
- // alignment, and the alignment is guaranteed to be bigger than the stack
- // alignment (if required) or 0 to get standard stack alignment.
- DYNAMIC_STACKALLOC,
-
- // Control flow instructions. These all have token chains.
-
- // BR - Unconditional branch. The first operand is the chain
- // operand, the second is the MBB to branch to.
- BR,
-
- // BRIND - Indirect branch. The first operand is the chain, the second
- // is the value to branch to, which must be of the same type as the target's
- // pointer type.
- BRIND,
-
- // BR_JT - Jumptable branch. The first operand is the chain, the second
- // is the jumptable index, the last one is the jumptable entry index.
- BR_JT,
-
- // BRCOND - Conditional branch. The first operand is the chain, the
- // second is the condition, the third is the block to branch to if the
- // condition is true. If the type of the condition is not i1, then the
- // high bits must conform to getBooleanContents.
- BRCOND,
-
- // BR_CC - Conditional branch. The behavior is like that of SELECT_CC, in
- // that the condition is represented as condition code, and two nodes to
- // compare, rather than as a combined SetCC node. The operands in order are
- // chain, cc, lhs, rhs, block to branch to if condition is true.
- BR_CC,
-
- // INLINEASM - Represents an inline asm block. This node always has two
- // return values: a chain and a flag result. The inputs are as follows:
- // Operand #0 : Input chain.
- // Operand #1 : a ExternalSymbolSDNode with a pointer to the asm string.
- // Operand #2n+2: A RegisterNode.
- // Operand #2n+3: A TargetConstant, indicating if the reg is a use/def
- // Operand #last: Optional, an incoming flag.
- INLINEASM,
-
- // EH_LABEL - Represents a label in mid basic block used to track
- // locations needed for debug and exception handling tables. These nodes
- // take a chain as input and return a chain.
- EH_LABEL,
-
- // STACKSAVE - STACKSAVE has one operand, an input chain. It produces a
- // value, the same type as the pointer type for the system, and an output
- // chain.
- STACKSAVE,
-
- // STACKRESTORE has two operands, an input chain and a pointer to restore to
- // it returns an output chain.
- STACKRESTORE,
-
- // CALLSEQ_START/CALLSEQ_END - These operators mark the beginning and end of
- // a call sequence, and carry arbitrary information that target might want
- // to know. The first operand is a chain, the rest are specified by the
- // target and not touched by the DAG optimizers.
- // CALLSEQ_START..CALLSEQ_END pairs may not be nested.
- CALLSEQ_START, // Beginning of a call sequence
- CALLSEQ_END, // End of a call sequence
-
- // VAARG - VAARG has three operands: an input chain, a pointer, and a
- // SRCVALUE. It returns a pair of values: the vaarg value and a new chain.
- VAARG,
-
- // VACOPY - VACOPY has five operands: an input chain, a destination pointer,
- // a source pointer, a SRCVALUE for the destination, and a SRCVALUE for the
- // source.
- VACOPY,
-
- // VAEND, VASTART - VAEND and VASTART have three operands: an input chain, a
- // pointer, and a SRCVALUE.
- VAEND, VASTART,
-
- // SRCVALUE - This is a node type that holds a Value* that is used to
- // make reference to a value in the LLVM IR.
- SRCVALUE,
-
- // PCMARKER - This corresponds to the pcmarker intrinsic.
- PCMARKER,
-
- // READCYCLECOUNTER - This corresponds to the readcyclecounter intrinsic.
- // The only operand is a chain and a value and a chain are produced. The
- // value is the contents of the architecture specific cycle counter like
- // register (or other high accuracy low latency clock source)
- READCYCLECOUNTER,
-
- // HANDLENODE node - Used as a handle for various purposes.
- HANDLENODE,
-
- // TRAMPOLINE - This corresponds to the init_trampoline intrinsic.
- // It takes as input a token chain, the pointer to the trampoline,
- // the pointer to the nested function, the pointer to pass for the
- // 'nest' parameter, a SRCVALUE for the trampoline and another for
- // the nested function (allowing targets to access the original
- // Function*). It produces the result of the intrinsic and a token
- // chain as output.
- TRAMPOLINE,
-
- // TRAP - Trapping instruction
- TRAP,
-
- // PREFETCH - This corresponds to a prefetch intrinsic. It takes chains are
- // their first operand. The other operands are the address to prefetch,
- // read / write specifier, and locality specifier.
- PREFETCH,
-
- // OUTCHAIN = MEMBARRIER(INCHAIN, load-load, load-store, store-load,
- // store-store, device)
- // This corresponds to the memory.barrier intrinsic.
- // it takes an input chain, 4 operands to specify the type of barrier, an
- // operand specifying if the barrier applies to device and uncached memory
- // and produces an output chain.
- MEMBARRIER,
-
- // Val, OUTCHAIN = ATOMIC_CMP_SWAP(INCHAIN, ptr, cmp, swap)
- // this corresponds to the atomic.lcs intrinsic.
- // cmp is compared to *ptr, and if equal, swap is stored in *ptr.
- // the return is always the original value in *ptr
- ATOMIC_CMP_SWAP,
-
- // Val, OUTCHAIN = ATOMIC_SWAP(INCHAIN, ptr, amt)
- // this corresponds to the atomic.swap intrinsic.
- // amt is stored to *ptr atomically.
- // the return is always the original value in *ptr
- ATOMIC_SWAP,
-
- // Val, OUTCHAIN = ATOMIC_LOAD_[OpName](INCHAIN, ptr, amt)
- // this corresponds to the atomic.load.[OpName] intrinsic.
- // op(*ptr, amt) is stored to *ptr atomically.
- // the return is always the original value in *ptr
- ATOMIC_LOAD_ADD,
- ATOMIC_LOAD_SUB,
- ATOMIC_LOAD_AND,
- ATOMIC_LOAD_OR,
- ATOMIC_LOAD_XOR,
- ATOMIC_LOAD_NAND,
- ATOMIC_LOAD_MIN,
- ATOMIC_LOAD_MAX,
- ATOMIC_LOAD_UMIN,
- ATOMIC_LOAD_UMAX,
-
- /// BUILTIN_OP_END - This must be the last enum value in this list.
- /// The target-specific pre-isel opcode values start here.
- BUILTIN_OP_END
- };
-
- /// FIRST_TARGET_MEMORY_OPCODE - Target-specific pre-isel operations
- /// which do not reference a specific memory location should be less than
- /// this value. Those that do must not be less than this value, and can
- /// be used with SelectionDAG::getMemIntrinsicNode.
- static const int FIRST_TARGET_MEMORY_OPCODE = BUILTIN_OP_END+80;
-
/// Node predicates
/// isBuildVectorAllOnes - Return true if the specified node is a
/// ISD::SCALAR_TO_VECTOR node or a BUILD_VECTOR node where only the low
/// element is not an undef.
bool isScalarToVector(const SDNode *N);
-
- //===--------------------------------------------------------------------===//
- /// MemIndexedMode enum - This enum defines the load / store indexed
- /// addressing modes.
- ///
- /// UNINDEXED "Normal" load / store. The effective address is already
- /// computed and is available in the base pointer. The offset
- /// operand is always undefined. In addition to producing a
- /// chain, an unindexed load produces one value (result of the
- /// load); an unindexed store does not produce a value.
- ///
- /// PRE_INC Similar to the unindexed mode where the effective address is
- /// PRE_DEC the value of the base pointer add / subtract the offset.
- /// It considers the computation as being folded into the load /
- /// store operation (i.e. the load / store does the address
- /// computation as well as performing the memory transaction).
- /// The base operand is always undefined. In addition to
- /// producing a chain, pre-indexed load produces two values
- /// (result of the load and the result of the address
- /// computation); a pre-indexed store produces one value (result
- /// of the address computation).
- ///
- /// POST_INC The effective address is the value of the base pointer. The
- /// POST_DEC value of the offset operand is then added to / subtracted
- /// from the base after memory transaction. In addition to
- /// producing a chain, post-indexed load produces two values
- /// (the result of the load and the result of the base +/- offset
- /// computation); a post-indexed store produces one value (the
- /// the result of the base +/- offset computation).
- ///
- enum MemIndexedMode {
- UNINDEXED = 0,
- PRE_INC,
- PRE_DEC,
- POST_INC,
- POST_DEC,
- LAST_INDEXED_MODE
- };
-
- //===--------------------------------------------------------------------===//
- /// LoadExtType enum - This enum defines the three variants of LOADEXT
- /// (load with extension).
- ///
- /// SEXTLOAD loads the integer operand and sign extends it to a larger
- /// integer result type.
- /// ZEXTLOAD loads the integer operand and zero extends it to a larger
- /// integer result type.
- /// EXTLOAD is used for three things: floating point extending loads,
- /// integer extending loads [the top bits are undefined], and vector
- /// extending loads [load into low elt].
- ///
- enum LoadExtType {
- NON_EXTLOAD = 0,
- EXTLOAD,
- SEXTLOAD,
- ZEXTLOAD,
- LAST_LOADEXT_TYPE
- };
-
- //===--------------------------------------------------------------------===//
- /// ISD::CondCode enum - These are ordered carefully to make the bitfields
- /// below work out, when considering SETFALSE (something that never exists
- /// dynamically) as 0. "U" -> Unsigned (for integer operands) or Unordered
- /// (for floating point), "L" -> Less than, "G" -> Greater than, "E" -> Equal
- /// to. If the "N" column is 1, the result of the comparison is undefined if
- /// the input is a NAN.
- ///
- /// All of these (except for the 'always folded ops') should be handled for
- /// floating point. For integer, only the SETEQ,SETNE,SETLT,SETLE,SETGT,
- /// SETGE,SETULT,SETULE,SETUGT, and SETUGE opcodes are used.
- ///
- /// Note that these are laid out in a specific order to allow bit-twiddling
- /// to transform conditions.
- enum CondCode {
- // Opcode N U L G E Intuitive operation
- SETFALSE, // 0 0 0 0 Always false (always folded)
- SETOEQ, // 0 0 0 1 True if ordered and equal
- SETOGT, // 0 0 1 0 True if ordered and greater than
- SETOGE, // 0 0 1 1 True if ordered and greater than or equal
- SETOLT, // 0 1 0 0 True if ordered and less than
- SETOLE, // 0 1 0 1 True if ordered and less than or equal
- SETONE, // 0 1 1 0 True if ordered and operands are unequal
- SETO, // 0 1 1 1 True if ordered (no nans)
- SETUO, // 1 0 0 0 True if unordered: isnan(X) | isnan(Y)
- SETUEQ, // 1 0 0 1 True if unordered or equal
- SETUGT, // 1 0 1 0 True if unordered or greater than
- SETUGE, // 1 0 1 1 True if unordered, greater than, or equal
- SETULT, // 1 1 0 0 True if unordered or less than
- SETULE, // 1 1 0 1 True if unordered, less than, or equal
- SETUNE, // 1 1 1 0 True if unordered or not equal
- SETTRUE, // 1 1 1 1 Always true (always folded)
- // Don't care operations: undefined if the input is a nan.
- SETFALSE2, // 1 X 0 0 0 Always false (always folded)
- SETEQ, // 1 X 0 0 1 True if equal
- SETGT, // 1 X 0 1 0 True if greater than
- SETGE, // 1 X 0 1 1 True if greater than or equal
- SETLT, // 1 X 1 0 0 True if less than
- SETLE, // 1 X 1 0 1 True if less than or equal
- SETNE, // 1 X 1 1 0 True if not equal
- SETTRUE2, // 1 X 1 1 1 Always true (always folded)
-
- SETCC_INVALID // Marker value.
- };
-
- /// isSignedIntSetCC - Return true if this is a setcc instruction that
- /// performs a signed comparison when used with integer operands.
- inline bool isSignedIntSetCC(CondCode Code) {
- return Code == SETGT || Code == SETGE || Code == SETLT || Code == SETLE;
- }
-
- /// isUnsignedIntSetCC - Return true if this is a setcc instruction that
- /// performs an unsigned comparison when used with integer operands.
- inline bool isUnsignedIntSetCC(CondCode Code) {
- return Code == SETUGT || Code == SETUGE || Code == SETULT || Code == SETULE;
- }
-
- /// isTrueWhenEqual - Return true if the specified condition returns true if
- /// the two operands to the condition are equal. Note that if one of the two
- /// operands is a NaN, this value is meaningless.
- inline bool isTrueWhenEqual(CondCode Cond) {
- return ((int)Cond & 1) != 0;
- }
-
- /// getUnorderedFlavor - This function returns 0 if the condition is always
- /// false if an operand is a NaN, 1 if the condition is always true if the
- /// operand is a NaN, and 2 if the condition is undefined if the operand is a
- /// NaN.
- inline unsigned getUnorderedFlavor(CondCode Cond) {
- return ((int)Cond >> 3) & 3;
- }
-
- /// getSetCCInverse - Return the operation corresponding to !(X op Y), where
- /// 'op' is a valid SetCC operation.
- CondCode getSetCCInverse(CondCode Operation, bool isInteger);
-
- /// getSetCCSwappedOperands - Return the operation corresponding to (Y op X)
- /// when given the operation for (X op Y).
- CondCode getSetCCSwappedOperands(CondCode Operation);
-
- /// getSetCCOrOperation - Return the result of a logical OR between different
- /// comparisons of identical values: ((X op1 Y) | (X op2 Y)). This
- /// function returns SETCC_INVALID if it is not possible to represent the
- /// resultant comparison.
- CondCode getSetCCOrOperation(CondCode Op1, CondCode Op2, bool isInteger);
-
- /// getSetCCAndOperation - Return the result of a logical AND between
- /// different comparisons of identical values: ((X op1 Y) & (X op2 Y)). This
- /// function returns SETCC_INVALID if it is not possible to represent the
- /// resultant comparison.
- CondCode getSetCCAndOperation(CondCode Op1, CondCode Op2, bool isInteger);
-
- //===--------------------------------------------------------------------===//
- /// CvtCode enum - This enum defines the various converts CONVERT_RNDSAT
- /// supports.
- enum CvtCode {
- CVT_FF, // Float from Float
- CVT_FS, // Float from Signed
- CVT_FU, // Float from Unsigned
- CVT_SF, // Signed from Float
- CVT_UF, // Unsigned from Float
- CVT_SS, // Signed from Signed
- CVT_SU, // Signed from Unsigned
- CVT_US, // Unsigned from Signed
- CVT_UU, // Unsigned from Unsigned
- CVT_INVALID // Marker - Invalid opcode
- };
-} // end llvm::ISD namespace
-
+} // end llvm:ISD namespace
//===----------------------------------------------------------------------===//
/// SDValue - Unlike LLVM values, Selection DAG nodes may return multiple
/// then they will be delete[]'d when the node is destroyed.
uint16_t OperandsNeedDelete : 1;
+ /// HasDebugValue - This tracks whether this node has one or more dbg_value
+ /// nodes corresponding to it.
+ uint16_t HasDebugValue : 1;
+
protected:
/// SubclassData - This member is defined by this class, but is not used for
/// anything. Subclasses can use it to hold whatever state they find useful.
/// This field is initialized to zero by the ctor.
- uint16_t SubclassData : 15;
+ uint16_t SubclassData : 14;
private:
/// NodeId - Unique id per SDNode in the DAG.
return ~NodeType;
}
+ /// getHasDebugValue - get this bit.
+ bool getHasDebugValue() const { return HasDebugValue; }
+
+ /// setHasDebugValue - set this bit.
+ void setHasDebugValue(bool b) { HasDebugValue = b; }
+
/// use_empty - Return true if there are no uses of this node.
///
bool use_empty() const { return UseList == NULL; }
SDNode(unsigned Opc, const DebugLoc dl, SDVTList VTs, const SDValue *Ops,
unsigned NumOps)
- : NodeType(Opc), OperandsNeedDelete(true), SubclassData(0),
- NodeId(-1),
+ : NodeType(Opc), OperandsNeedDelete(true), HasDebugValue(false),
+ SubclassData(0), NodeId(-1),
OperandList(NumOps ? new SDUse[NumOps] : 0),
ValueList(VTs.VTs), UseList(NULL),
NumOperands(NumOps), NumValues(VTs.NumVTs),
/// This constructor adds no operands itself; operands can be
/// set later with InitOperands.
SDNode(unsigned Opc, const DebugLoc dl, SDVTList VTs)
- : NodeType(Opc), OperandsNeedDelete(false), SubclassData(0),
- NodeId(-1), OperandList(0), ValueList(VTs.VTs), UseList(NULL),
- NumOperands(0), NumValues(VTs.NumVTs),
+ : NodeType(Opc), OperandsNeedDelete(false), HasDebugValue(false),
+ SubclassData(0), NodeId(-1), OperandList(0), ValueList(VTs.VTs),
+ UseList(NULL), NumOperands(0), NumValues(VTs.NumVTs),
debugLoc(dl) {}
/// InitOperands - Initialize the operands list of this with 1 operand.
public:
// FIXME: Remove the "noinline" attribute once <rdar://problem/5852746> is
// fixed.
-#ifdef __GNUC__
+#if __GNUC__==4 && __GNUC_MINOR__==2 && defined(__APPLE__) && !defined(__llvm__)
explicit __attribute__((__noinline__)) HandleSDNode(SDValue X)
#else
explicit HandleSDNode(SDValue X)
#endif
- : SDNode(ISD::HANDLENODE, DebugLoc::getUnknownLoc(),
- getSDVTList(MVT::Other)) {
+ : SDNode(ISD::HANDLENODE, DebugLoc(), getSDVTList(MVT::Other)) {
InitOperands(&Op, X);
}
~HandleSDNode();
friend class SelectionDAG;
ConstantSDNode(bool isTarget, const ConstantInt *val, EVT VT)
: SDNode(isTarget ? ISD::TargetConstant : ISD::Constant,
- DebugLoc::getUnknownLoc(), getSDVTList(VT)), Value(val) {
+ DebugLoc(), getSDVTList(VT)), Value(val) {
}
public:
friend class SelectionDAG;
ConstantFPSDNode(bool isTarget, const ConstantFP *val, EVT VT)
: SDNode(isTarget ? ISD::TargetConstantFP : ISD::ConstantFP,
- DebugLoc::getUnknownLoc(), getSDVTList(VT)), Value(val) {
+ DebugLoc(), getSDVTList(VT)), Value(val) {
}
public:
const APFloat& getValueAPF() const { return Value->getValueAPF(); }
const ConstantFP *getConstantFPValue() const { return Value; }
+ /// isZero - Return true if the value is positive or negative zero.
+ bool isZero() const { return Value->isZero(); }
+
+ /// isNaN - Return true if the value is a NaN.
+ bool isNaN() const { return Value->isNaN(); }
+
/// isExactlyValue - We don't rely on operator== working on double values, as
/// it returns true for things that are clearly not equal, like -0.0 and 0.0.
/// As such, this method can be used to do an exact bit-for-bit comparison of
};
class GlobalAddressSDNode : public SDNode {
- GlobalValue *TheGlobal;
+ const GlobalValue *TheGlobal;
int64_t Offset;
unsigned char TargetFlags;
friend class SelectionDAG;
int64_t o, unsigned char TargetFlags);
public:
- GlobalValue *getGlobal() const { return TheGlobal; }
+ const GlobalValue *getGlobal() const { return TheGlobal; }
int64_t getOffset() const { return Offset; }
unsigned char getTargetFlags() const { return TargetFlags; }
// Return the address space this GlobalAddress belongs to.
friend class SelectionDAG;
FrameIndexSDNode(int fi, EVT VT, bool isTarg)
: SDNode(isTarg ? ISD::TargetFrameIndex : ISD::FrameIndex,
- DebugLoc::getUnknownLoc(), getSDVTList(VT)), FI(fi) {
+ DebugLoc(), getSDVTList(VT)), FI(fi) {
}
public:
friend class SelectionDAG;
JumpTableSDNode(int jti, EVT VT, bool isTarg, unsigned char TF)
: SDNode(isTarg ? ISD::TargetJumpTable : ISD::JumpTable,
- DebugLoc::getUnknownLoc(), getSDVTList(VT)), JTI(jti), TargetFlags(TF) {
+ DebugLoc(), getSDVTList(VT)), JTI(jti), TargetFlags(TF) {
}
public:
class ConstantPoolSDNode : public SDNode {
union {
- Constant *ConstVal;
+ const Constant *ConstVal;
MachineConstantPoolValue *MachineCPVal;
} Val;
int Offset; // It's a MachineConstantPoolValue if top bit is set.
unsigned Alignment; // Minimum alignment requirement of CP (not log2 value).
unsigned char TargetFlags;
friend class SelectionDAG;
- ConstantPoolSDNode(bool isTarget, Constant *c, EVT VT, int o, unsigned Align,
- unsigned char TF)
+ ConstantPoolSDNode(bool isTarget, const Constant *c, EVT VT, int o,
+ unsigned Align, unsigned char TF)
: SDNode(isTarget ? ISD::TargetConstantPool : ISD::ConstantPool,
- DebugLoc::getUnknownLoc(),
+ DebugLoc(),
getSDVTList(VT)), Offset(o), Alignment(Align), TargetFlags(TF) {
assert((int)Offset >= 0 && "Offset is too large");
Val.ConstVal = c;
ConstantPoolSDNode(bool isTarget, MachineConstantPoolValue *v,
EVT VT, int o, unsigned Align, unsigned char TF)
: SDNode(isTarget ? ISD::TargetConstantPool : ISD::ConstantPool,
- DebugLoc::getUnknownLoc(),
+ DebugLoc(),
getSDVTList(VT)), Offset(o), Alignment(Align), TargetFlags(TF) {
assert((int)Offset >= 0 && "Offset is too large");
Val.MachineCPVal = v;
return (int)Offset < 0;
}
- Constant *getConstVal() const {
+ const Constant *getConstVal() const {
assert(!isMachineConstantPoolEntry() && "Wrong constantpool type");
return Val.ConstVal;
}
/// blocks out of order when they're jumped to, which makes it a bit
/// harder. Let's see if we need it first.
explicit BasicBlockSDNode(MachineBasicBlock *mbb)
- : SDNode(ISD::BasicBlock, DebugLoc::getUnknownLoc(),
- getSDVTList(MVT::Other)), MBB(mbb) {
+ : SDNode(ISD::BasicBlock, DebugLoc(), getSDVTList(MVT::Other)), MBB(mbb) {
}
public:
friend class SelectionDAG;
/// Create a SrcValue for a general value.
explicit SrcValueSDNode(const Value *v)
- : SDNode(ISD::SRCVALUE, DebugLoc::getUnknownLoc(),
- getSDVTList(MVT::Other)), V(v) {}
+ : SDNode(ISD::SRCVALUE, DebugLoc(), getSDVTList(MVT::Other)), V(v) {}
public:
/// getValue - return the contained Value.
return N->getOpcode() == ISD::SRCVALUE;
}
};
+
+class MDNodeSDNode : public SDNode {
+ const MDNode *MD;
+ friend class SelectionDAG;
+ explicit MDNodeSDNode(const MDNode *md)
+ : SDNode(ISD::MDNODE_SDNODE, DebugLoc(), getSDVTList(MVT::Other)), MD(md) {}
+public:
+
+ const MDNode *getMD() const { return MD; }
+
+ static bool classof(const MDNodeSDNode *) { return true; }
+ static bool classof(const SDNode *N) {
+ return N->getOpcode() == ISD::MDNODE_SDNODE;
+ }
+};
class RegisterSDNode : public SDNode {
unsigned Reg;
friend class SelectionDAG;
RegisterSDNode(unsigned reg, EVT VT)
- : SDNode(ISD::Register, DebugLoc::getUnknownLoc(),
- getSDVTList(VT)), Reg(reg) {
+ : SDNode(ISD::Register, DebugLoc(), getSDVTList(VT)), Reg(reg) {
}
public:
};
class BlockAddressSDNode : public SDNode {
- BlockAddress *BA;
+ const BlockAddress *BA;
unsigned char TargetFlags;
friend class SelectionDAG;
- BlockAddressSDNode(unsigned NodeTy, EVT VT, BlockAddress *ba,
+ BlockAddressSDNode(unsigned NodeTy, EVT VT, const BlockAddress *ba,
unsigned char Flags)
- : SDNode(NodeTy, DebugLoc::getUnknownLoc(), getSDVTList(VT)),
+ : SDNode(NodeTy, DebugLoc(), getSDVTList(VT)),
BA(ba), TargetFlags(Flags) {
}
public:
- BlockAddress *getBlockAddress() const { return BA; }
+ const BlockAddress *getBlockAddress() const { return BA; }
unsigned char getTargetFlags() const { return TargetFlags; }
static bool classof(const BlockAddressSDNode *) { return true; }
}
};
-class LabelSDNode : public SDNode {
+class EHLabelSDNode : public SDNode {
SDUse Chain;
- unsigned LabelID;
+ MCSymbol *Label;
friend class SelectionDAG;
- LabelSDNode(unsigned NodeTy, DebugLoc dl, SDValue ch, unsigned id)
- : SDNode(NodeTy, dl, getSDVTList(MVT::Other)), LabelID(id) {
+ EHLabelSDNode(DebugLoc dl, SDValue ch, MCSymbol *L)
+ : SDNode(ISD::EH_LABEL, dl, getSDVTList(MVT::Other)), Label(L) {
InitOperands(&Chain, ch);
}
public:
- unsigned getLabelID() const { return LabelID; }
+ MCSymbol *getLabel() const { return Label; }
- static bool classof(const LabelSDNode *) { return true; }
+ static bool classof(const EHLabelSDNode *) { return true; }
static bool classof(const SDNode *N) {
return N->getOpcode() == ISD::EH_LABEL;
}
friend class SelectionDAG;
ExternalSymbolSDNode(bool isTarget, const char *Sym, unsigned char TF, EVT VT)
: SDNode(isTarget ? ISD::TargetExternalSymbol : ISD::ExternalSymbol,
- DebugLoc::getUnknownLoc(),
- getSDVTList(VT)), Symbol(Sym), TargetFlags(TF) {
+ DebugLoc(), getSDVTList(VT)), Symbol(Sym), TargetFlags(TF) {
}
public:
ISD::CondCode Condition;
friend class SelectionDAG;
explicit CondCodeSDNode(ISD::CondCode Cond)
- : SDNode(ISD::CONDCODE, DebugLoc::getUnknownLoc(),
- getSDVTList(MVT::Other)), Condition(Cond) {
+ : SDNode(ISD::CONDCODE, DebugLoc(), getSDVTList(MVT::Other)),
+ Condition(Cond) {
}
public:
EVT ValueType;
friend class SelectionDAG;
explicit VTSDNode(EVT VT)
- : SDNode(ISD::VALUETYPE, DebugLoc::getUnknownLoc(),
- getSDVTList(MVT::Other)), ValueType(VT) {
+ : SDNode(ISD::VALUETYPE, DebugLoc(), getSDVTList(MVT::Other)),
+ ValueType(VT) {
}
public:
}
}
-
} // end llvm namespace
#endif