/// 1. Unbuffered (BufferMode == Unbuffered)
/// 1. Uninitialized (BufferMode != Unbuffered && OutBufStart == 0).
/// 2. Buffered (BufferMode != Unbuffered && OutBufStart != 0 &&
- /// OutBufEnd - OutBufStart >= 64).
+ /// OutBufEnd - OutBufStart >= 1).
///
/// If buffered, then the raw_ostream owns the buffer if (BufferMode ==
/// InternalBuffer); otherwise the buffer has been set via SetBuffer and is
/// for a \see write_impl() call to handle the data which has been put into
/// this buffer.
char *OutBufStart, *OutBufEnd, *OutBufCur;
-
+
enum BufferKind {
Unbuffered = 0,
InternalBuffer,
ExternalBuffer
} BufferMode;
- /// Error This flag is true if an error of any kind has been detected.
- ///
- bool Error;
-
public:
// color order matches ANSI escape sequence, don't change
enum Colors {
};
explicit raw_ostream(bool unbuffered=false)
- : BufferMode(unbuffered ? Unbuffered : InternalBuffer), Error(false) {
+ : BufferMode(unbuffered ? Unbuffered : InternalBuffer) {
// Start out ready to flush.
OutBufStart = OutBufEnd = OutBufCur = 0;
}
virtual ~raw_ostream();
/// tell - Return the current offset with the file.
- uint64_t tell() { return current_pos() + GetNumBytesInBuffer(); }
-
- /// has_error - Return the value of the flag in this raw_ostream indicating
- /// whether an output error has been encountered.
- bool has_error() const {
- return Error;
- }
-
- /// clear_error - Set the flag read by has_error() to false. If the error
- /// flag is set at the time when this raw_ostream's destructor is called,
- /// llvm_report_error is called to report the error. Use clear_error()
- /// after handling the error to avoid this behavior.
- void clear_error() {
- Error = false;
- }
+ uint64_t tell() const { return current_pos() + GetNumBytesInBuffer(); }
//===--------------------------------------------------------------------===//
// Configuration Interface
SetBufferAndMode(new char[Size], Size, InternalBuffer);
}
- size_t GetBufferSize() {
+ size_t GetBufferSize() const {
// If we're supposed to be buffered but haven't actually gotten around
// to allocating the buffer yet, return the value that would be used.
if (BufferMode != Unbuffered && OutBufStart == 0)
return *this;
}
- raw_ostream &operator<<(const StringRef &Str) {
+ raw_ostream &operator<<(StringRef Str) {
// Inline fast path, particularly for strings with a known length.
size_t Size = Str.size();
}
raw_ostream &operator<<(const char *Str) {
- // Inline fast path, particulary for constant strings where a sufficiently
+ // Inline fast path, particularly for constant strings where a sufficiently
// smart compiler will simplify strlen.
- this->operator<<(StringRef(Str));
- return *this;
+ return this->operator<<(StringRef(Str));
}
raw_ostream &operator<<(const std::string &Str) {
// Avoid the fast path, it would only increase code size for a marginal win.
- write(Str.data(), Str.length());
- return *this;
+ return write(Str.data(), Str.length());
}
raw_ostream &operator<<(unsigned long N);
raw_ostream &operator<<(long long N);
raw_ostream &operator<<(const void *P);
raw_ostream &operator<<(unsigned int N) {
- this->operator<<(static_cast<unsigned long>(N));
- return *this;
+ return this->operator<<(static_cast<unsigned long>(N));
}
raw_ostream &operator<<(int N) {
- this->operator<<(static_cast<long>(N));
- return *this;
+ return this->operator<<(static_cast<long>(N));
}
- raw_ostream &operator<<(double N);
+ raw_ostream &operator<<(double N);
/// write_hex - Output \arg N in hexadecimal, without any prefix or padding.
raw_ostream &write_hex(unsigned long long N);
+ /// write_escaped - Output \arg Str, turning '\\', '\t', '\n', '"', and
+ /// anything that doesn't satisfy std::isprint into an escape sequence.
+ raw_ostream &write_escaped(StringRef Str, bool UseHexEscapes = false);
+
raw_ostream &write(unsigned char C);
raw_ostream &write(const char *Ptr, size_t Size);
/// indent - Insert 'NumSpaces' spaces.
raw_ostream &indent(unsigned NumSpaces);
-
-
+
+
/// Changes the foreground color of text that will be output from this point
/// forward.
/// @param colors ANSI color to use, the special SAVEDCOLOR can be used to
/// @param bold bold/brighter text, default false
/// @param bg if true change the background, default: change foreground
/// @returns itself so it can be used within << invocations
- virtual raw_ostream &changeColor(enum Colors colors, bool bold=false,
- bool bg=false) { return *this; }
+ virtual raw_ostream &changeColor(enum Colors, bool = false, bool = false) {
+ return *this; }
/// Resets the colors to terminal defaults. Call this when you are done
/// outputting colored text, or before program exit.
virtual raw_ostream &resetColor() { return *this; }
+ /// Reverses the forground and background colors.
+ virtual raw_ostream &reverseColor() { return *this; }
+
+ /// This function determines if this stream is connected to a "tty" or
+ /// "console" window. That is, the output would be displayed to the user
+ /// rather than being put on a pipe or stored in a file.
+ virtual bool is_displayed() const { return false; }
+
+ /// This function determines if this stream is displayed and supports colors.
+ virtual bool has_colors() const { return is_displayed(); }
+
//===--------------------------------------------------------------------===//
// Subclass Interface
//===--------------------------------------------------------------------===//
/// write_impl - The is the piece of the class that is implemented
/// by subclasses. This writes the \args Size bytes starting at
/// \arg Ptr to the underlying stream.
- ///
+ ///
/// This function is guaranteed to only be called at a point at which it is
/// safe for the subclass to install a new buffer via SetBuffer.
///
/// current_pos - Return the current position within the stream, not
/// counting the bytes currently in the buffer.
- virtual uint64_t current_pos() = 0;
+ virtual uint64_t current_pos() const = 0;
protected:
/// SetBuffer - Use the provided buffer as the raw_ostream buffer. This is
/// preferred_buffer_size - Return an efficient buffer size for the
/// underlying output mechanism.
- virtual size_t preferred_buffer_size();
-
- /// error_detected - Set the flag indicating that an output error has
- /// been encountered.
- void error_detected() { Error = true; }
+ virtual size_t preferred_buffer_size() const;
/// getBufferStart - Return the beginning of the current stream buffer, or 0
/// if the stream is unbuffered.
class raw_fd_ostream : public raw_ostream {
int FD;
bool ShouldClose;
+
+ /// Error This flag is true if an error of any kind has been detected.
+ ///
+ bool Error;
+
+ /// Controls whether the stream should attempt to use atomic writes, when
+ /// possible.
+ bool UseAtomicWrites;
+
uint64_t pos;
/// write_impl - See raw_ostream::write_impl.
/// current_pos - Return the current position within the stream, not
/// counting the bytes currently in the buffer.
- virtual uint64_t current_pos() { return pos; }
+ virtual uint64_t current_pos() const { return pos; }
/// preferred_buffer_size - Determine an efficient buffer size.
- virtual size_t preferred_buffer_size();
+ virtual size_t preferred_buffer_size() const;
+
+ /// error_detected - Set the flag indicating that an output error has
+ /// been encountered.
+ void error_detected() { Error = true; }
public:
-
+
enum {
/// F_Excl - When opening a file, this flag makes raw_fd_ostream
/// report an error if the file already exists.
/// make this distinction.
F_Binary = 4
};
-
+
/// raw_fd_ostream - Open the specified file for writing. If an error occurs,
/// information about the error is put into ErrorInfo, and the stream should
/// be immediately destroyed; the string will be empty if no error occurred.
/// This allows optional flags to control how the file will be opened.
///
- /// \param Filename - The file to open. If this is "-" then the
- /// stream will use stdout instead.
+ /// As a special case, if Filename is "-", then the stream will use
+ /// STDOUT_FILENO instead of opening a file. Note that it will still consider
+ /// itself to own the file descriptor. In particular, it will close the
+ /// file descriptor when it is done (this is necessary to detect
+ /// output errors).
raw_fd_ostream(const char *Filename, std::string &ErrorInfo,
unsigned Flags = 0);
/// raw_fd_ostream ctor - FD is the file descriptor that this writes to. If
/// ShouldClose is true, this closes the file when the stream is destroyed.
- raw_fd_ostream(int fd, bool shouldClose,
- bool unbuffered=false) : raw_ostream(unbuffered), FD(fd),
- ShouldClose(shouldClose) {}
-
+ raw_fd_ostream(int fd, bool shouldClose, bool unbuffered=false);
+
~raw_fd_ostream();
/// close - Manually flush the stream and close the file.
+ /// Note that this does not call fsync.
void close();
/// seek - Flushes the stream and repositions the underlying file descriptor
- /// positition to the offset specified from the beginning of the file.
+ /// position to the offset specified from the beginning of the file.
uint64_t seek(uint64_t off);
+ /// SetUseAtomicWrite - Set the stream to attempt to use atomic writes for
+ /// individual output routines where possible.
+ ///
+ /// Note that because raw_ostream's are typically buffered, this flag is only
+ /// sensible when used on unbuffered streams which will flush their output
+ /// immediately.
+ void SetUseAtomicWrites(bool Value) {
+ UseAtomicWrites = Value;
+ }
+
virtual raw_ostream &changeColor(enum Colors colors, bool bold=false,
bool bg=false);
virtual raw_ostream &resetColor();
-};
-/// raw_stdout_ostream - This is a stream that always prints to stdout.
-///
-class raw_stdout_ostream : public raw_fd_ostream {
- // An out of line virtual method to provide a home for the class vtable.
- virtual void handle();
-public:
- raw_stdout_ostream();
-};
+ virtual raw_ostream &reverseColor();
-/// raw_stderr_ostream - This is a stream that always prints to stderr.
-///
-class raw_stderr_ostream : public raw_fd_ostream {
- // An out of line virtual method to provide a home for the class vtable.
- virtual void handle();
-public:
- raw_stderr_ostream();
+ virtual bool is_displayed() const;
+
+ virtual bool has_colors() const;
+
+ /// has_error - Return the value of the flag in this raw_fd_ostream indicating
+ /// whether an output error has been encountered.
+ /// This doesn't implicitly flush any pending output. Also, it doesn't
+ /// guarantee to detect all errors unless the stream has been closed.
+ bool has_error() const {
+ return Error;
+ }
+
+ /// clear_error - Set the flag read by has_error() to false. If the error
+ /// flag is set at the time when this raw_ostream's destructor is called,
+ /// report_fatal_error is called to report the error. Use clear_error()
+ /// after handling the error to avoid this behavior.
+ ///
+ /// "Errors should never pass silently.
+ /// Unless explicitly silenced."
+ /// - from The Zen of Python, by Tim Peters
+ ///
+ void clear_error() {
+ Error = false;
+ }
};
/// outs() - This returns a reference to a raw_ostream for standard output.
/// current_pos - Return the current position within the stream, not
/// counting the bytes currently in the buffer.
- virtual uint64_t current_pos() { return OS.size(); }
+ virtual uint64_t current_pos() const { return OS.size(); }
public:
explicit raw_string_ostream(std::string &O) : OS(O) {}
~raw_string_ostream();
/// current_pos - Return the current position within the stream, not
/// counting the bytes currently in the buffer.
- virtual uint64_t current_pos();
+ virtual uint64_t current_pos() const;
public:
/// Construct a new raw_svector_ostream.
///
explicit raw_svector_ostream(SmallVectorImpl<char> &O);
~raw_svector_ostream();
+ /// resync - This is called when the SmallVector we're appending to is changed
+ /// outside of the raw_svector_ostream's control. It is only safe to do this
+ /// if the raw_svector_ostream has previously been flushed.
+ void resync();
+
/// str - Flushes the stream contents to the target vector and return a
/// StringRef for the vector contents.
StringRef str();
class raw_null_ostream : public raw_ostream {
/// write_impl - See raw_ostream::write_impl.
virtual void write_impl(const char *Ptr, size_t size);
-
+
/// current_pos - Return the current position within the stream, not
/// counting the bytes currently in the buffer.
- virtual uint64_t current_pos();
+ virtual uint64_t current_pos() const;
public:
explicit raw_null_ostream() {}
projects / oota-llvm.git / blobdiff