#ifndef LLVM_TARGET_TARGETINSTRINFO_H
#define LLVM_TARGET_TARGETINSTRINFO_H
-#include "Support/DataTypes.h"
+#include "llvm/CodeGen/MachineBasicBlock.h"
+#include "llvm/Support/DataTypes.h"
#include <vector>
#include <cassert>
// Data types used to define information about a single machine instruction
//---------------------------------------------------------------------------
-typedef int MachineOpCode;
+typedef short MachineOpCode;
typedef unsigned InstrSchedClass;
-const MachineOpCode INVALID_MACHINE_OPCODE = -1;
-
-
//---------------------------------------------------------------------------
// struct TargetInstrDescriptor:
// Predefined information about each machine instruction.
const unsigned M_BRANCH_FLAG = 1 << 1;
const unsigned M_CALL_FLAG = 1 << 2;
const unsigned M_RET_FLAG = 1 << 3;
-const unsigned M_ARITH_FLAG = 1 << 4;
+const unsigned M_BARRIER_FLAG = 1 << 4;
+const unsigned M_DELAY_SLOT_FLAG = 1 << 5;
const unsigned M_CC_FLAG = 1 << 6;
-const unsigned M_LOGICAL_FLAG = 1 << 6;
-const unsigned M_INT_FLAG = 1 << 7;
-const unsigned M_FLOAT_FLAG = 1 << 8;
-const unsigned M_CONDL_FLAG = 1 << 9;
-const unsigned M_LOAD_FLAG = 1 << 10;
-const unsigned M_PREFETCH_FLAG = 1 << 11;
-const unsigned M_STORE_FLAG = 1 << 12;
-const unsigned M_DUMMY_PHI_FLAG = 1 << 13;
-const unsigned M_PSEUDO_FLAG = 1 << 14; // Pseudo instruction
-// 3-addr instructions which really work like 2-addr ones, eg. X86 add/sub
-const unsigned M_2_ADDR_FLAG = 1 << 15;
+const unsigned M_LOAD_FLAG = 1 << 7;
+const unsigned M_STORE_FLAG = 1 << 8;
+
+// M_2_ADDR_FLAG - 3-addr instructions which really work like 2-addr ones.
+const unsigned M_2_ADDR_FLAG = 1 << 9;
+
+// M_CONVERTIBLE_TO_3_ADDR - This is a M_2_ADDR_FLAG instruction which can be
+// changed into a 3-address instruction if the first two operands cannot be
+// assigned to the same register. The target must implement the
+// TargetInstrInfo::convertToThreeAddress method for this instruction.
+const unsigned M_CONVERTIBLE_TO_3_ADDR = 1 << 10;
+
+// This M_COMMUTABLE - is a 2- or 3-address instruction (of the form X = op Y,
+// Z), which produces the same result if Y and Z are exchanged.
+const unsigned M_COMMUTABLE = 1 << 11;
// M_TERMINATOR_FLAG - Is this instruction part of the terminator for a basic
// block? Typically this is things like return and branch instructions.
// Various passes use this to insert code into the bottom of a basic block, but
// before control flow occurs.
-const unsigned M_TERMINATOR_FLAG = 1 << 16;
+const unsigned M_TERMINATOR_FLAG = 1 << 12;
-struct TargetInstrDescriptor {
+class TargetInstrDescriptor {
+public:
const char * Name; // Assembly language mnemonic for the opcode.
int numOperands; // Number of args; -1 if variable #args
int resultPos; // Position of the result; -1 if no result
///
class TargetInstrInfo {
const TargetInstrDescriptor* desc; // raw array to allow static init'n
- unsigned descSize; // number of entries in the desc array
+ unsigned NumOpcodes; // number of entries in the desc array
unsigned numRealOpCodes; // number of non-dummy op codes
TargetInstrInfo(const TargetInstrInfo &); // DO NOT IMPLEMENT
void operator=(const TargetInstrInfo &); // DO NOT IMPLEMENT
public:
- TargetInstrInfo(const TargetInstrDescriptor *desc, unsigned descSize,
- unsigned numRealOpCodes);
+ TargetInstrInfo(const TargetInstrDescriptor *desc, unsigned NumOpcodes);
virtual ~TargetInstrInfo();
// Invariant: All instruction sets use opcode #0 as the PHI instruction
enum { PHI = 0 };
- unsigned getNumRealOpCodes() const { return numRealOpCodes; }
- unsigned getNumTotalOpCodes() const { return descSize; }
+ unsigned getNumOpcodes() const { return NumOpcodes; }
/// get - Return the machine instruction descriptor that corresponds to the
/// specified instruction opcode.
///
- const TargetInstrDescriptor& get(MachineOpCode opCode) const {
- assert(opCode >= 0 && opCode < (int)descSize);
- return desc[opCode];
+ const TargetInstrDescriptor& get(MachineOpCode Opcode) const {
+ assert((unsigned)Opcode < NumOpcodes);
+ return desc[Opcode];
}
- const char *getName(MachineOpCode opCode) const {
- return get(opCode).Name;
- }
-
- int getNumOperands(MachineOpCode opCode) const {
- return get(opCode).numOperands;
- }
-
- int getResultPos(MachineOpCode opCode) const {
- return get(opCode).resultPos;
+ const char *getName(MachineOpCode Opcode) const {
+ return get(Opcode).Name;
}
- unsigned getNumDelaySlots(MachineOpCode opCode) const {
- return get(opCode).numDelaySlots;
+ int getNumOperands(MachineOpCode Opcode) const {
+ return get(Opcode).numOperands;
}
-
- InstrSchedClass getSchedClass(MachineOpCode opCode) const {
- return get(opCode).schedClass;
+
+
+ InstrSchedClass getSchedClass(MachineOpCode Opcode) const {
+ return get(Opcode).schedClass;
}
- const unsigned *getImplicitUses(MachineOpCode opCode) const {
- return get(opCode).ImplicitUses;
+ const unsigned *getImplicitUses(MachineOpCode Opcode) const {
+ return get(Opcode).ImplicitUses;
}
- const unsigned *getImplicitDefs(MachineOpCode opCode) const {
- return get(opCode).ImplicitDefs;
+ const unsigned *getImplicitDefs(MachineOpCode Opcode) const {
+ return get(Opcode).ImplicitDefs;
}
+
//
// Query instruction class flags according to the machine-independent
// flags listed above.
//
- bool isNop(MachineOpCode opCode) const {
- return get(opCode).Flags & M_NOP_FLAG;
+ bool isReturn(MachineOpCode Opcode) const {
+ return get(Opcode).Flags & M_RET_FLAG;
}
- bool isBranch(MachineOpCode opCode) const {
- return get(opCode).Flags & M_BRANCH_FLAG;
- }
- bool isCall(MachineOpCode opCode) const {
- return get(opCode).Flags & M_CALL_FLAG;
- }
- bool isReturn(MachineOpCode opCode) const {
- return get(opCode).Flags & M_RET_FLAG;
- }
- bool isControlFlow(MachineOpCode opCode) const {
- return get(opCode).Flags & M_BRANCH_FLAG
- || get(opCode).Flags & M_CALL_FLAG
- || get(opCode).Flags & M_RET_FLAG;
- }
- bool isArith(MachineOpCode opCode) const {
- return get(opCode).Flags & M_ARITH_FLAG;
- }
- bool isCCInstr(MachineOpCode opCode) const {
- return get(opCode).Flags & M_CC_FLAG;
+
+ bool isTwoAddrInstr(MachineOpCode Opcode) const {
+ return get(Opcode).Flags & M_2_ADDR_FLAG;
}
- bool isLogical(MachineOpCode opCode) const {
- return get(opCode).Flags & M_LOGICAL_FLAG;
+ bool isTerminatorInstr(unsigned Opcode) const {
+ return get(Opcode).Flags & M_TERMINATOR_FLAG;
}
- bool isIntInstr(MachineOpCode opCode) const {
- return get(opCode).Flags & M_INT_FLAG;
+
+ /// Return true if the instruction is a register to register move
+ /// and leave the source and dest operands in the passed parameters.
+ virtual bool isMoveInstr(const MachineInstr& MI,
+ unsigned& sourceReg,
+ unsigned& destReg) const {
+ return false;
}
- bool isFloatInstr(MachineOpCode opCode) const {
- return get(opCode).Flags & M_FLOAT_FLAG;
+
+ /// convertToThreeAddress - This method must be implemented by targets that
+ /// set the M_CONVERTIBLE_TO_3_ADDR flag. When this flag is set, the target
+ /// may be able to convert a two-address instruction into a true
+ /// three-address instruction on demand. This allows the X86 target (for
+ /// example) to convert ADD and SHL instructions into LEA instructions if they
+ /// would require register copies due to two-addressness.
+ ///
+ /// This method returns a null pointer if the transformation cannot be
+ /// performed, otherwise it returns the new instruction.
+ ///
+ virtual MachineInstr *convertToThreeAddress(MachineInstr *TA) const {
+ return 0;
}
- bool isConditional(MachineOpCode opCode) const {
- return get(opCode).Flags & M_CONDL_FLAG;
+
+ /// commuteInstruction - If a target has any instructions that are commutable,
+ /// but require converting to a different instruction or making non-trivial
+ /// changes to commute them, this method can overloaded to do this. The
+ /// default implementation of this method simply swaps the first two operands
+ /// of MI and returns it.
+ ///
+ /// If a target wants to make more aggressive changes, they can construct and
+ /// return a new machine instruction. If an instruction cannot commute, it
+ /// can also return null.
+ ///
+ virtual MachineInstr *commuteInstruction(MachineInstr *MI) const;
+
+ /// Insert a goto (unconditional branch) sequence to TMBB, at the
+ /// end of MBB
+ virtual void insertGoto(MachineBasicBlock& MBB,
+ MachineBasicBlock& TMBB) const {
+ assert(0 && "Target didn't implement insertGoto!");
}
- bool isLoad(MachineOpCode opCode) const {
- return get(opCode).Flags & M_LOAD_FLAG;
+
+ /// Reverses the branch condition of the MachineInstr pointed by
+ /// MI. The instruction is replaced and the new MI is returned.
+ virtual MachineBasicBlock::iterator
+ reverseBranchCondition(MachineBasicBlock::iterator MI) const {
+ assert(0 && "Target didn't implement reverseBranchCondition!");
+ abort();
+ return MI;
}
- bool isPrefetch(MachineOpCode opCode) const {
- return get(opCode).Flags & M_PREFETCH_FLAG;
+
+ //-------------------------------------------------------------------------
+ // Code generation support for creating individual machine instructions
+ //
+ // WARNING: These methods are Sparc specific
+ //
+ // DO NOT USE ANY OF THESE METHODS THEY ARE DEPRECATED!
+ //
+ //-------------------------------------------------------------------------
+
+ unsigned getNumDelaySlots(MachineOpCode Opcode) const {
+ return get(Opcode).numDelaySlots;
}
- bool isLoadOrPrefetch(MachineOpCode opCode) const {
- return get(opCode).Flags & M_LOAD_FLAG
- || get(opCode).Flags & M_PREFETCH_FLAG;
+ bool isCCInstr(MachineOpCode Opcode) const {
+ return get(Opcode).Flags & M_CC_FLAG;
}
- bool isStore(MachineOpCode opCode) const {
- return get(opCode).Flags & M_STORE_FLAG;
+ bool isNop(MachineOpCode Opcode) const {
+ return get(Opcode).Flags & M_NOP_FLAG;
}
- bool isMemoryAccess(MachineOpCode opCode) const {
- return get(opCode).Flags & M_LOAD_FLAG
- || get(opCode).Flags & M_PREFETCH_FLAG
- || get(opCode).Flags & M_STORE_FLAG;
+ bool isBranch(MachineOpCode Opcode) const {
+ return get(Opcode).Flags & M_BRANCH_FLAG;
}
- bool isDummyPhiInstr(MachineOpCode opCode) const {
- return get(opCode).Flags & M_DUMMY_PHI_FLAG;
+ /// isBarrier - Returns true if the specified instruction stops control flow
+ /// from executing the instruction immediately following it. Examples include
+ /// unconditional branches and return instructions.
+ bool isBarrier(MachineOpCode Opcode) const {
+ return get(Opcode).Flags & M_BARRIER_FLAG;
}
- bool isPseudoInstr(MachineOpCode opCode) const {
- return get(opCode).Flags & M_PSEUDO_FLAG;
+
+ bool isCall(MachineOpCode Opcode) const {
+ return get(Opcode).Flags & M_CALL_FLAG;
}
- bool isTwoAddrInstr(MachineOpCode opCode) const {
- return get(opCode).Flags & M_2_ADDR_FLAG;
+ bool isLoad(MachineOpCode Opcode) const {
+ return get(Opcode).Flags & M_LOAD_FLAG;
}
- bool isTerminatorInstr(unsigned Opcode) const {
- return get(Opcode).Flags & M_TERMINATOR_FLAG;
+ bool isStore(MachineOpCode Opcode) const {
+ return get(Opcode).Flags & M_STORE_FLAG;
}
- //
- // Return true if the instruction is a register to register move and
- // leave the source and dest operands in the passed parameters.
- //
- virtual bool isMoveInstr(const MachineInstr& MI,
- unsigned& sourceReg,
- unsigned& destReg) const {
- return false;
+ /// hasDelaySlot - Returns true if the specified instruction has a delay slot
+ /// which must be filled by the code generator.
+ bool hasDelaySlot(unsigned Opcode) const {
+ return get(Opcode).Flags & M_DELAY_SLOT_FLAG;
}
- // Check if an instruction can be issued before its operands are ready,
- // or if a subsequent instruction that uses its result can be issued
- // before the results are ready.
- // Default to true since most instructions on many architectures allow this.
- //
- virtual bool hasOperandInterlock(MachineOpCode opCode) const {
+ virtual bool hasResultInterlock(MachineOpCode Opcode) const {
return true;
}
-
- virtual bool hasResultInterlock(MachineOpCode opCode) const {
- return true;
- }
-
+
//
// Latencies for individual instructions and instruction pairs
//
- virtual int minLatency(MachineOpCode opCode) const {
- return get(opCode).latency;
+ virtual int minLatency(MachineOpCode Opcode) const {
+ return get(Opcode).latency;
}
- virtual int maxLatency(MachineOpCode opCode) const {
- return get(opCode).latency;
+ virtual int maxLatency(MachineOpCode Opcode) const {
+ return get(Opcode).latency;
}
//
// Which operand holds an immediate constant? Returns -1 if none
//
- virtual int getImmedConstantPos(MachineOpCode opCode) const {
+ virtual int getImmedConstantPos(MachineOpCode Opcode) const {
return -1; // immediate position is machine specific, so say -1 == "none"
}
// Check if the specified constant fits in the immediate field
// of this machine instruction
//
- virtual bool constantFitsInImmedField(MachineOpCode opCode,
+ virtual bool constantFitsInImmedField(MachineOpCode Opcode,
int64_t intValue) const;
// Return the largest positive constant that can be held in the IMMED field
// (this is true for all immediate fields in SPARC instructions).
// Return 0 if the instruction has no IMMED field.
//
- virtual uint64_t maxImmedConstant(MachineOpCode opCode,
+ virtual uint64_t maxImmedConstant(MachineOpCode Opcode,
bool &isSignExtended) const {
- isSignExtended = get(opCode).immedIsSignExtended;
- return get(opCode).maxImmedConst;
- }
-
- //-------------------------------------------------------------------------
- // Queries about representation of LLVM quantities (e.g., constants)
- //-------------------------------------------------------------------------
-
- /// ConstantTypeMustBeLoaded - Test if this type of constant must be loaded
- /// from memory into a register, i.e., cannot be set bitwise in register and
- /// cannot use immediate fields of instructions. Note that this only makes
- /// sense for primitive types.
- ///
- virtual bool ConstantTypeMustBeLoaded(const Constant* CV) const;
-
- // Test if this constant may not fit in the immediate field of the
- // machine instructions (probably) generated for this instruction.
- //
- virtual bool ConstantMayNotFitInImmedField(const Constant* CV,
- const Instruction* I) const {
- return true; // safe but very conservative
- }
-
-
- /// createNOPinstr - returns the target's implementation of NOP, which is
- /// usually a pseudo-instruction, implemented by a degenerate version of
- /// another instruction, e.g. X86: xchg ax, ax; SparcV9: sethi g0, 0
- ///
- virtual MachineInstr* createNOPinstr() const = 0;
-
- /// isNOPinstr - not having a special NOP opcode, we need to know if a given
- /// instruction is interpreted as an `official' NOP instr, i.e., there may be
- /// more than one way to `do nothing' but only one canonical way to slack off.
- ///
- virtual bool isNOPinstr(const MachineInstr &MI) const = 0;
-
- //-------------------------------------------------------------------------
- // Code generation support for creating individual machine instructions
- //
- // WARNING: These methods are Sparc specific
- //
- //-------------------------------------------------------------------------
-
- // Get certain common op codes for the current target. this and all the
- // Create* methods below should be moved to a machine code generation class
- //
- virtual MachineOpCode getNOPOpCode() const { abort(); }
-
- // Get the value of an integral constant in the form that must
- // be put into the machine register. The specified constant is interpreted
- // as (i.e., converted if necessary to) the specified destination type. The
- // result is always returned as an uint64_t, since the representation of
- // int64_t and uint64_t are identical. The argument can be any known const.
- //
- // isValidConstant is set to true if a valid constant was found.
- //
- virtual uint64_t ConvertConstantToIntType(const TargetMachine &target,
- const Value *V,
- const Type *destType,
- bool &isValidConstant) const {
- abort();
- }
-
- // Create an instruction sequence to put the constant `val' into
- // the virtual register `dest'. `val' may be a Constant or a
- // GlobalValue, viz., the constant address of a global variable or function.
- // The generated instructions are returned in `mvec'.
- // Any temp. registers (TmpInstruction) created are recorded in mcfi.
- // Symbolic constants or constants that must be accessed from memory
- // are added to the constant pool via MachineFunction::get(F).
- //
- virtual void CreateCodeToLoadConst(const TargetMachine& target,
- Function* F,
- Value* val,
- Instruction* dest,
- std::vector<MachineInstr*>& mvec,
- MachineCodeForInstruction& mcfi) const {
- abort();
- }
-
- // Create an instruction sequence to copy an integer value `val'
- // to a floating point value `dest' by copying to memory and back.
- // val must be an integral type. dest must be a Float or Double.
- // The generated instructions are returned in `mvec'.
- // Any temp. registers (TmpInstruction) created are recorded in mcfi.
- // Any stack space required is allocated via mcff.
- //
- virtual void CreateCodeToCopyIntToFloat(const TargetMachine& target,
- Function* F,
- Value* val,
- Instruction* dest,
- std::vector<MachineInstr*>& mvec,
- MachineCodeForInstruction& MI) const {
- abort();
- }
-
- // Similarly, create an instruction sequence to copy an FP value
- // `val' to an integer value `dest' by copying to memory and back.
- // The generated instructions are returned in `mvec'.
- // Any temp. registers (TmpInstruction) created are recorded in mcfi.
- // Any stack space required is allocated via mcff.
- //
- virtual void CreateCodeToCopyFloatToInt(const TargetMachine& target,
- Function* F,
- Value* val,
- Instruction* dest,
- std::vector<MachineInstr*>& mvec,
- MachineCodeForInstruction& MI) const {
- abort();
- }
-
- // Create instruction(s) to copy src to dest, for arbitrary types
- // The generated instructions are returned in `mvec'.
- // Any temp. registers (TmpInstruction) created are recorded in mcfi.
- // Any stack space required is allocated via mcff.
- //
- virtual void CreateCopyInstructionsByType(const TargetMachine& target,
- Function* F,
- Value* src,
- Instruction* dest,
- std::vector<MachineInstr*>& mvec,
- MachineCodeForInstruction& MI) const {
- abort();
- }
-
- // Create instruction sequence to produce a sign-extended register value
- // from an arbitrary sized value (sized in bits, not bytes).
- // The generated instructions are appended to `mvec'.
- // Any temp. registers (TmpInstruction) created are recorded in mcfi.
- // Any stack space required is allocated via mcff.
- //
- virtual void CreateSignExtensionInstructions(const TargetMachine& target,
- Function* F,
- Value* srcVal,
- Value* destVal,
- unsigned numLowBits,
- std::vector<MachineInstr*>& mvec,
- MachineCodeForInstruction& MI) const {
- abort();
- }
-
- // Create instruction sequence to produce a zero-extended register value
- // from an arbitrary sized value (sized in bits, not bytes).
- // The generated instructions are appended to `mvec'.
- // Any temp. registers (TmpInstruction) created are recorded in mcfi.
- // Any stack space required is allocated via mcff.
- //
- virtual void CreateZeroExtensionInstructions(const TargetMachine& target,
- Function* F,
- Value* srcVal,
- Value* destVal,
- unsigned srcSizeInBits,
- std::vector<MachineInstr*>& mvec,
- MachineCodeForInstruction& mcfi) const {
- abort();
+ isSignExtended = get(Opcode).immedIsSignExtended;
+ return get(Opcode).maxImmedConst;
}
};