* enum ieee80211_max_queues - maximum number of queues
*
* @IEEE80211_MAX_QUEUES: Maximum number of regular device queues.
+ * @IEEE80211_MAX_QUEUE_MAP: bitmap with maximum queues set
*/
enum ieee80211_max_queues {
IEEE80211_MAX_QUEUES = 16,
+ IEEE80211_MAX_QUEUE_MAP = BIT(IEEE80211_MAX_QUEUES) - 1,
};
#define IEEE80211_INVAL_HW_QUEUE 0xff
* path needing to access it; even though the netdev carrier will always
* be off when it is %NULL there can still be races and packets could be
* processed after it switches back to %NULL.
+ * @debugfs_dir: debugfs dentry, can be used by drivers to create own per
+ * interface debug files. Note that it will be NULL for the virtual
+ * monitor interface (if that is requested.)
* @drv_priv: data area for driver use, will always be aligned to
* sizeof(void *).
*/
u32 driver_flags;
+#ifdef CONFIG_MAC80211_DEBUGFS
+ struct dentry *debugfs_dir;
+#endif
+
/* must be last */
u8 drv_priv[0] __aligned(sizeof(void *));
};
* filter those response frames except in the case of frames that
* are buffered in the driver -- those must remain buffered to avoid
* reordering. Because it is possible that no frames are released
- * in this case, the driver must call ieee80211_sta_eosp_irqsafe()
+ * in this case, the driver must call ieee80211_sta_eosp()
* to indicate to mac80211 that the service period ended anyway.
*
* Finally, if frames from multiple TIDs are released from mac80211
* but the driver might reorder them, it must clear & set the flags
* appropriately (only the last frame may have %IEEE80211_TX_STATUS_EOSP)
* and also take care of the EOSP and MORE_DATA bits in the frame.
- * The driver may also use ieee80211_sta_eosp_irqsafe() in this case.
+ * The driver may also use ieee80211_sta_eosp() in this case.
*/
/**
* MAC address of the device going away.
* Hence, this callback must be implemented. It can sleep.
*
- * @add_interface_debugfs: Drivers can use this callback to add debugfs files
- * when a vif is added to mac80211. This callback and
- * @remove_interface_debugfs should be within a CONFIG_MAC80211_DEBUGFS
- * conditional. @remove_interface_debugfs must be provided for cleanup.
- * This callback can sleep.
- *
- * @remove_interface_debugfs: Remove the debugfs files which were added using
- * @add_interface_debugfs. This callback must remove all debugfs entries
- * that were added because mac80211 only removes interface debugfs when the
- * interface is destroyed, not when it is removed from the driver.
- * This callback can sleep.
- *
* @config: Handler for configuration requests. IEEE 802.11 code calls this
* function to change hardware configuration, e.g., channel.
* This function should never fail but returns a negative error code
* See the section "Frame filtering" for more information.
* This callback must be implemented and can sleep.
*
+ * @set_multicast_list: Configure the device's interface specific RX multicast
+ * filter. This callback is optional. This callback must be atomic.
+ *
* @set_tim: Set TIM bit. mac80211 calls this function when a TIM bit
* must be set or cleared for a given STA. Must be atomic.
*
* @testmode_dump: Implement a cfg80211 test mode dump. The callback can sleep.
*
* @flush: Flush all pending frames from the hardware queue, making sure
- * that the hardware queues are empty. If the parameter @drop is set
- * to %true, pending frames may be dropped. The callback can sleep.
+ * that the hardware queues are empty. The @queues parameter is a bitmap
+ * of queues to flush, which is useful if different virtual interfaces
+ * use different hardware queues; it may also indicate all queues.
+ * If the parameter @drop is set to %true, pending frames may be dropped.
+ * The callback can sleep.
*
* @channel_switch: Drivers that need (or want) to offload the channel
* switch operation for CSAs received from the AP may implement this
* setting the EOSP flag in the QoS header of the frames. Also, when the
* service period ends, the driver must set %IEEE80211_TX_STATUS_EOSP
* on the last frame in the SP. Alternatively, it may call the function
- * ieee80211_sta_eosp_irqsafe() to inform mac80211 of the end of the SP.
+ * ieee80211_sta_eosp() to inform mac80211 of the end of the SP.
* This callback must be atomic.
* @allow_buffered_frames: Prepare device to allow the given number of frames
* to go out to the given station. The frames will be sent by mac80211
* them between the TIDs, it must set the %IEEE80211_TX_STATUS_EOSP flag
* on the last frame and clear it on all others and also handle the EOSP
* bit in the QoS header correctly. Alternatively, it can also call the
- * ieee80211_sta_eosp_irqsafe() function.
+ * ieee80211_sta_eosp() function.
* The @tids parameter is a bitmap and tells the driver which TIDs the
* frames will be on; it will at most have two bits set.
* This callback must be atomic.
unsigned int changed_flags,
unsigned int *total_flags,
u64 multicast);
+ void (*set_multicast_list)(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif, bool allmulti,
+ struct netdev_hw_addr_list *mc_list);
+
int (*set_tim)(struct ieee80211_hw *hw, struct ieee80211_sta *sta,
bool set);
int (*set_key)(struct ieee80211_hw *hw, enum set_key_cmd cmd,
struct ieee80211_vif *vif,
struct ieee80211_sta *sta,
struct dentry *dir);
- void (*add_interface_debugfs)(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct dentry *dir);
- void (*remove_interface_debugfs)(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct dentry *dir);
#endif
void (*sta_notify)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
enum sta_notify_cmd, struct ieee80211_sta *sta);
struct netlink_callback *cb,
void *data, int len);
#endif
- void (*flush)(struct ieee80211_hw *hw, bool drop);
+ void (*flush)(struct ieee80211_hw *hw, u32 queues, bool drop);
void (*channel_switch)(struct ieee80211_hw *hw,
struct ieee80211_channel_switch *ch_switch);
int (*napi_poll)(struct ieee80211_hw *hw, int budget);
* %IEEE80211_TX_STATUS_EOSP bit and call this function instead.
* This applies for PS-Poll as well as uAPSD.
*
- * Note that there is no non-_irqsafe version right now as
- * it wasn't needed, but just like _tx_status() and _rx()
- * must not be mixed in irqsafe/non-irqsafe versions, this
- * function must not be mixed with those either. Use the
- * all irqsafe, or all non-irqsafe, don't mix! If you need
- * the non-irqsafe version of this, you need to add it.
+ * Note that just like with _tx_status() and _rx() drivers must
+ * not mix calls to irqsafe/non-irqsafe versions, this function
+ * must not be mixed with those either. Use the all irqsafe, or
+ * all non-irqsafe, don't mix!
+ *
+ * NB: the _irqsafe version of this function doesn't exist, no
+ * driver needs it right now. Don't call this function if
+ * you'd need the _irqsafe version, look at the git history
+ * and restore the _irqsafe version!
*/
-void ieee80211_sta_eosp_irqsafe(struct ieee80211_sta *pubsta);
+void ieee80211_sta_eosp(struct ieee80211_sta *pubsta);
/**
* ieee80211_iter_keys - iterate keys programmed into the device
projects / firefly-linux-kernel-4.4.55.git / blobdiff