#include <linux/hardirq.h>
#include <linux/delay.h>
#include <linux/module.h>
+#include <linux/kthread.h>
+#include <linux/tick.h>
#define CREATE_TRACE_POINTS
barrier(); /* critical section before exit code. */
t->rcu_read_lock_nesting = INT_MIN;
barrier(); /* assign before ->rcu_read_unlock_special load */
- if (unlikely(ACCESS_ONCE(t->rcu_read_unlock_special)))
+ if (unlikely(ACCESS_ONCE(t->rcu_read_unlock_special.s)))
rcu_read_unlock_special(t);
barrier(); /* ->rcu_read_unlock_special load before assign */
t->rcu_read_lock_nesting = 0;
}
EXPORT_SYMBOL_GPL(debug_lockdep_rcu_enabled);
+/**
+ * rcu_read_lock_held() - might we be in RCU read-side critical section?
+ *
+ * If CONFIG_DEBUG_LOCK_ALLOC is selected, returns nonzero iff in an RCU
+ * read-side critical section. In absence of CONFIG_DEBUG_LOCK_ALLOC,
+ * this assumes we are in an RCU read-side critical section unless it can
+ * prove otherwise. This is useful for debug checks in functions that
+ * require that they be called within an RCU read-side critical section.
+ *
+ * Checks debug_lockdep_rcu_enabled() to prevent false positives during boot
+ * and while lockdep is disabled.
+ *
+ * Note that rcu_read_lock() and the matching rcu_read_unlock() must
+ * occur in the same context, for example, it is illegal to invoke
+ * rcu_read_unlock() in process context if the matching rcu_read_lock()
+ * was invoked from within an irq handler.
+ *
+ * Note that rcu_read_lock() is disallowed if the CPU is either idle or
+ * offline from an RCU perspective, so check for those as well.
+ */
+int rcu_read_lock_held(void)
+{
+ if (!debug_lockdep_rcu_enabled())
+ return 1;
+ if (!rcu_is_watching())
+ return 0;
+ if (!rcu_lockdep_current_cpu_online())
+ return 0;
+ return lock_is_held(&rcu_lock_map);
+}
+EXPORT_SYMBOL_GPL(rcu_read_lock_held);
+
/**
* rcu_read_lock_bh_held() - might we be in RCU-bh read-side critical section?
*
EXPORT_SYMBOL_GPL(rcuhead_debug_descr);
#endif /* #ifdef CONFIG_DEBUG_OBJECTS_RCU_HEAD */
-#if defined(CONFIG_TREE_RCU) || defined(CONFIG_TREE_PREEMPT_RCU) || defined(CONFIG_RCU_TRACE)
+#if defined(CONFIG_TREE_RCU) || defined(CONFIG_PREEMPT_RCU) || defined(CONFIG_RCU_TRACE)
void do_trace_rcu_torture_read(const char *rcutorturename, struct rcu_head *rhp,
unsigned long secs,
unsigned long c_old, unsigned long c)
early_initcall(check_cpu_stall_init);
#endif /* #ifdef CONFIG_RCU_STALL_COMMON */
+
+#ifdef CONFIG_TASKS_RCU
+
+/*
+ * Simple variant of RCU whose quiescent states are voluntary context switch,
+ * user-space execution, and idle. As such, grace periods can take one good
+ * long time. There are no read-side primitives similar to rcu_read_lock()
+ * and rcu_read_unlock() because this implementation is intended to get
+ * the system into a safe state for some of the manipulations involved in
+ * tracing and the like. Finally, this implementation does not support
+ * high call_rcu_tasks() rates from multiple CPUs. If this is required,
+ * per-CPU callback lists will be needed.
+ */
+
+/* Global list of callbacks and associated lock. */
+static struct rcu_head *rcu_tasks_cbs_head;
+static struct rcu_head **rcu_tasks_cbs_tail = &rcu_tasks_cbs_head;
+static DECLARE_WAIT_QUEUE_HEAD(rcu_tasks_cbs_wq);
+static DEFINE_RAW_SPINLOCK(rcu_tasks_cbs_lock);
+
+/* Track exiting tasks in order to allow them to be waited for. */
+DEFINE_SRCU(tasks_rcu_exit_srcu);
+
+/* Control stall timeouts. Disable with <= 0, otherwise jiffies till stall. */
+static int rcu_task_stall_timeout __read_mostly = HZ * 60 * 10;
+module_param(rcu_task_stall_timeout, int, 0644);
+
+static void rcu_spawn_tasks_kthread(void);
+
+/*
+ * Post an RCU-tasks callback. First call must be from process context
+ * after the scheduler if fully operational.
+ */
+void call_rcu_tasks(struct rcu_head *rhp, void (*func)(struct rcu_head *rhp))
+{
+ unsigned long flags;
+ bool needwake;
+
+ rhp->next = NULL;
+ rhp->func = func;
+ raw_spin_lock_irqsave(&rcu_tasks_cbs_lock, flags);
+ needwake = !rcu_tasks_cbs_head;
+ *rcu_tasks_cbs_tail = rhp;
+ rcu_tasks_cbs_tail = &rhp->next;
+ raw_spin_unlock_irqrestore(&rcu_tasks_cbs_lock, flags);
+ if (needwake) {
+ rcu_spawn_tasks_kthread();
+ wake_up(&rcu_tasks_cbs_wq);
+ }
+}
+EXPORT_SYMBOL_GPL(call_rcu_tasks);
+
+/**
+ * synchronize_rcu_tasks - wait until an rcu-tasks grace period has elapsed.
+ *
+ * Control will return to the caller some time after a full rcu-tasks
+ * grace period has elapsed, in other words after all currently
+ * executing rcu-tasks read-side critical sections have elapsed. These
+ * read-side critical sections are delimited by calls to schedule(),
+ * cond_resched_rcu_qs(), idle execution, userspace execution, calls
+ * to synchronize_rcu_tasks(), and (in theory, anyway) cond_resched().
+ *
+ * This is a very specialized primitive, intended only for a few uses in
+ * tracing and other situations requiring manipulation of function
+ * preambles and profiling hooks. The synchronize_rcu_tasks() function
+ * is not (yet) intended for heavy use from multiple CPUs.
+ *
+ * Note that this guarantee implies further memory-ordering guarantees.
+ * On systems with more than one CPU, when synchronize_rcu_tasks() returns,
+ * each CPU is guaranteed to have executed a full memory barrier since the
+ * end of its last RCU-tasks read-side critical section whose beginning
+ * preceded the call to synchronize_rcu_tasks(). In addition, each CPU
+ * having an RCU-tasks read-side critical section that extends beyond
+ * the return from synchronize_rcu_tasks() is guaranteed to have executed
+ * a full memory barrier after the beginning of synchronize_rcu_tasks()
+ * and before the beginning of that RCU-tasks read-side critical section.
+ * Note that these guarantees include CPUs that are offline, idle, or
+ * executing in user mode, as well as CPUs that are executing in the kernel.
+ *
+ * Furthermore, if CPU A invoked synchronize_rcu_tasks(), which returned
+ * to its caller on CPU B, then both CPU A and CPU B are guaranteed
+ * to have executed a full memory barrier during the execution of
+ * synchronize_rcu_tasks() -- even if CPU A and CPU B are the same CPU
+ * (but again only if the system has more than one CPU).
+ */
+void synchronize_rcu_tasks(void)
+{
+ /* Complain if the scheduler has not started. */
+ rcu_lockdep_assert(!rcu_scheduler_active,
+ "synchronize_rcu_tasks called too soon");
+
+ /* Wait for the grace period. */
+ wait_rcu_gp(call_rcu_tasks);
+}
+EXPORT_SYMBOL_GPL(synchronize_rcu_tasks);
+
+/**
+ * rcu_barrier_tasks - Wait for in-flight call_rcu_tasks() callbacks.
+ *
+ * Although the current implementation is guaranteed to wait, it is not
+ * obligated to, for example, if there are no pending callbacks.
+ */
+void rcu_barrier_tasks(void)
+{
+ /* There is only one callback queue, so this is easy. ;-) */
+ synchronize_rcu_tasks();
+}
+EXPORT_SYMBOL_GPL(rcu_barrier_tasks);
+
+/* See if tasks are still holding out, complain if so. */
+static void check_holdout_task(struct task_struct *t,
+ bool needreport, bool *firstreport)
+{
+ int cpu;
+
+ if (!ACCESS_ONCE(t->rcu_tasks_holdout) ||
+ t->rcu_tasks_nvcsw != ACCESS_ONCE(t->nvcsw) ||
+ !ACCESS_ONCE(t->on_rq) ||
+ (IS_ENABLED(CONFIG_NO_HZ_FULL) &&
+ !is_idle_task(t) && t->rcu_tasks_idle_cpu >= 0)) {
+ ACCESS_ONCE(t->rcu_tasks_holdout) = false;
+ list_del_init(&t->rcu_tasks_holdout_list);
+ put_task_struct(t);
+ return;
+ }
+ if (!needreport)
+ return;
+ if (*firstreport) {
+ pr_err("INFO: rcu_tasks detected stalls on tasks:\n");
+ *firstreport = false;
+ }
+ cpu = task_cpu(t);
+ pr_alert("%p: %c%c nvcsw: %lu/%lu holdout: %d idle_cpu: %d/%d\n",
+ t, ".I"[is_idle_task(t)],
+ "N."[cpu < 0 || !tick_nohz_full_cpu(cpu)],
+ t->rcu_tasks_nvcsw, t->nvcsw, t->rcu_tasks_holdout,
+ t->rcu_tasks_idle_cpu, cpu);
+ sched_show_task(t);
+}
+
+/* RCU-tasks kthread that detects grace periods and invokes callbacks. */
+static int __noreturn rcu_tasks_kthread(void *arg)
+{
+ unsigned long flags;
+ struct task_struct *g, *t;
+ unsigned long lastreport;
+ struct rcu_head *list;
+ struct rcu_head *next;
+ LIST_HEAD(rcu_tasks_holdouts);
+
+ /* Run on housekeeping CPUs by default. Sysadm can move if desired. */
+ housekeeping_affine(current);
+
+ /*
+ * Each pass through the following loop makes one check for
+ * newly arrived callbacks, and, if there are some, waits for
+ * one RCU-tasks grace period and then invokes the callbacks.
+ * This loop is terminated by the system going down. ;-)
+ */
+ for (;;) {
+
+ /* Pick up any new callbacks. */
+ raw_spin_lock_irqsave(&rcu_tasks_cbs_lock, flags);
+ list = rcu_tasks_cbs_head;
+ rcu_tasks_cbs_head = NULL;
+ rcu_tasks_cbs_tail = &rcu_tasks_cbs_head;
+ raw_spin_unlock_irqrestore(&rcu_tasks_cbs_lock, flags);
+
+ /* If there were none, wait a bit and start over. */
+ if (!list) {
+ wait_event_interruptible(rcu_tasks_cbs_wq,
+ rcu_tasks_cbs_head);
+ if (!rcu_tasks_cbs_head) {
+ WARN_ON(signal_pending(current));
+ schedule_timeout_interruptible(HZ/10);
+ }
+ continue;
+ }
+
+ /*
+ * Wait for all pre-existing t->on_rq and t->nvcsw
+ * transitions to complete. Invoking synchronize_sched()
+ * suffices because all these transitions occur with
+ * interrupts disabled. Without this synchronize_sched(),
+ * a read-side critical section that started before the
+ * grace period might be incorrectly seen as having started
+ * after the grace period.
+ *
+ * This synchronize_sched() also dispenses with the
+ * need for a memory barrier on the first store to
+ * ->rcu_tasks_holdout, as it forces the store to happen
+ * after the beginning of the grace period.
+ */
+ synchronize_sched();
+
+ /*
+ * There were callbacks, so we need to wait for an
+ * RCU-tasks grace period. Start off by scanning
+ * the task list for tasks that are not already
+ * voluntarily blocked. Mark these tasks and make
+ * a list of them in rcu_tasks_holdouts.
+ */
+ rcu_read_lock();
+ for_each_process_thread(g, t) {
+ if (t != current && ACCESS_ONCE(t->on_rq) &&
+ !is_idle_task(t)) {
+ get_task_struct(t);
+ t->rcu_tasks_nvcsw = ACCESS_ONCE(t->nvcsw);
+ ACCESS_ONCE(t->rcu_tasks_holdout) = true;
+ list_add(&t->rcu_tasks_holdout_list,
+ &rcu_tasks_holdouts);
+ }
+ }
+ rcu_read_unlock();
+
+ /*
+ * Wait for tasks that are in the process of exiting.
+ * This does only part of the job, ensuring that all
+ * tasks that were previously exiting reach the point
+ * where they have disabled preemption, allowing the
+ * later synchronize_sched() to finish the job.
+ */
+ synchronize_srcu(&tasks_rcu_exit_srcu);
+
+ /*
+ * Each pass through the following loop scans the list
+ * of holdout tasks, removing any that are no longer
+ * holdouts. When the list is empty, we are done.
+ */
+ lastreport = jiffies;
+ while (!list_empty(&rcu_tasks_holdouts)) {
+ bool firstreport;
+ bool needreport;
+ int rtst;
+ struct task_struct *t1;
+
+ schedule_timeout_interruptible(HZ);
+ rtst = ACCESS_ONCE(rcu_task_stall_timeout);
+ needreport = rtst > 0 &&
+ time_after(jiffies, lastreport + rtst);
+ if (needreport)
+ lastreport = jiffies;
+ firstreport = true;
+ WARN_ON(signal_pending(current));
+ list_for_each_entry_safe(t, t1, &rcu_tasks_holdouts,
+ rcu_tasks_holdout_list) {
+ check_holdout_task(t, needreport, &firstreport);
+ cond_resched();
+ }
+ }
+
+ /*
+ * Because ->on_rq and ->nvcsw are not guaranteed
+ * to have a full memory barriers prior to them in the
+ * schedule() path, memory reordering on other CPUs could
+ * cause their RCU-tasks read-side critical sections to
+ * extend past the end of the grace period. However,
+ * because these ->nvcsw updates are carried out with
+ * interrupts disabled, we can use synchronize_sched()
+ * to force the needed ordering on all such CPUs.
+ *
+ * This synchronize_sched() also confines all
+ * ->rcu_tasks_holdout accesses to be within the grace
+ * period, avoiding the need for memory barriers for
+ * ->rcu_tasks_holdout accesses.
+ *
+ * In addition, this synchronize_sched() waits for exiting
+ * tasks to complete their final preempt_disable() region
+ * of execution, cleaning up after the synchronize_srcu()
+ * above.
+ */
+ synchronize_sched();
+
+ /* Invoke the callbacks. */
+ while (list) {
+ next = list->next;
+ local_bh_disable();
+ list->func(list);
+ local_bh_enable();
+ list = next;
+ cond_resched();
+ }
+ schedule_timeout_uninterruptible(HZ/10);
+ }
+}
+
+/* Spawn rcu_tasks_kthread() at first call to call_rcu_tasks(). */
+static void rcu_spawn_tasks_kthread(void)
+{
+ static DEFINE_MUTEX(rcu_tasks_kthread_mutex);
+ static struct task_struct *rcu_tasks_kthread_ptr;
+ struct task_struct *t;
+
+ if (ACCESS_ONCE(rcu_tasks_kthread_ptr)) {
+ smp_mb(); /* Ensure caller sees full kthread. */
+ return;
+ }
+ mutex_lock(&rcu_tasks_kthread_mutex);
+ if (rcu_tasks_kthread_ptr) {
+ mutex_unlock(&rcu_tasks_kthread_mutex);
+ return;
+ }
+ t = kthread_run(rcu_tasks_kthread, NULL, "rcu_tasks_kthread");
+ BUG_ON(IS_ERR(t));
+ smp_mb(); /* Ensure others see full kthread. */
+ ACCESS_ONCE(rcu_tasks_kthread_ptr) = t;
+ mutex_unlock(&rcu_tasks_kthread_mutex);
+}
+
+#endif /* #ifdef CONFIG_TASKS_RCU */
+
+#ifdef CONFIG_PROVE_RCU
+
+/*
+ * Early boot self test parameters, one for each flavor
+ */
+static bool rcu_self_test;
+static bool rcu_self_test_bh;
+static bool rcu_self_test_sched;
+
+module_param(rcu_self_test, bool, 0444);
+module_param(rcu_self_test_bh, bool, 0444);
+module_param(rcu_self_test_sched, bool, 0444);
+
+static int rcu_self_test_counter;
+
+static void test_callback(struct rcu_head *r)
+{
+ rcu_self_test_counter++;
+ pr_info("RCU test callback executed %d\n", rcu_self_test_counter);
+}
+
+static void early_boot_test_call_rcu(void)
+{
+ static struct rcu_head head;
+
+ call_rcu(&head, test_callback);
+}
+
+static void early_boot_test_call_rcu_bh(void)
+{
+ static struct rcu_head head;
+
+ call_rcu_bh(&head, test_callback);
+}
+
+static void early_boot_test_call_rcu_sched(void)
+{
+ static struct rcu_head head;
+
+ call_rcu_sched(&head, test_callback);
+}
+
+void rcu_early_boot_tests(void)
+{
+ pr_info("Running RCU self tests\n");
+
+ if (rcu_self_test)
+ early_boot_test_call_rcu();
+ if (rcu_self_test_bh)
+ early_boot_test_call_rcu_bh();
+ if (rcu_self_test_sched)
+ early_boot_test_call_rcu_sched();
+}
+
+static int rcu_verify_early_boot_tests(void)
+{
+ int ret = 0;
+ int early_boot_test_counter = 0;
+
+ if (rcu_self_test) {
+ early_boot_test_counter++;
+ rcu_barrier();
+ }
+ if (rcu_self_test_bh) {
+ early_boot_test_counter++;
+ rcu_barrier_bh();
+ }
+ if (rcu_self_test_sched) {
+ early_boot_test_counter++;
+ rcu_barrier_sched();
+ }
+
+ if (rcu_self_test_counter != early_boot_test_counter) {
+ WARN_ON(1);
+ ret = -1;
+ }
+
+ return ret;
+}
+late_initcall(rcu_verify_early_boot_tests);
+#else
+void rcu_early_boot_tests(void) {}
+#endif /* CONFIG_PROVE_RCU */
projects / firefly-linux-kernel-4.4.55.git / blobdiff