#include "llvm/Analysis/ScalarEvolutionExpander.h"
#include "llvm/Analysis/LoopInfo.h"
+#include "llvm/IntrinsicInst.h"
+#include "llvm/LLVMContext.h"
#include "llvm/Target/TargetData.h"
+#include "llvm/ADT/STLExtras.h"
using namespace llvm;
-/// InsertCastOfTo - Insert a cast of V to the specified type, doing what
-/// we can to share the casts.
-Value *SCEVExpander::InsertCastOfTo(Instruction::CastOps opcode, Value *V,
- const Type *Ty) {
+/// ReuseOrCreateCast - Arrange for there to be a cast of V to Ty at IP,
+/// reusing an existing cast if a suitable one exists, moving an existing
+/// cast if a suitable one exists but isn't in the right place, or
+/// creating a new one.
+Value *SCEVExpander::ReuseOrCreateCast(Value *V, const Type *Ty,
+ Instruction::CastOps Op,
+ BasicBlock::iterator IP) {
+ // Check to see if there is already a cast!
+ for (Value::use_iterator UI = V->use_begin(), E = V->use_end();
+ UI != E; ++UI) {
+ User *U = *UI;
+ if (U->getType() == Ty)
+ if (CastInst *CI = dyn_cast<CastInst>(U))
+ if (CI->getOpcode() == Op) {
+ // If the cast isn't where we want it, fix it.
+ if (BasicBlock::iterator(CI) != IP) {
+ // Create a new cast, and leave the old cast in place in case
+ // it is being used as an insert point. Clear its operand
+ // so that it doesn't hold anything live.
+ Instruction *NewCI = CastInst::Create(Op, V, Ty, "", IP);
+ NewCI->takeName(CI);
+ CI->replaceAllUsesWith(NewCI);
+ CI->setOperand(0, UndefValue::get(V->getType()));
+ rememberInstruction(NewCI);
+ return NewCI;
+ }
+ rememberInstruction(CI);
+ return CI;
+ }
+ }
+
+ // Create a new cast.
+ Instruction *I = CastInst::Create(Op, V, Ty, V->getName(), IP);
+ rememberInstruction(I);
+ return I;
+}
+
+/// InsertNoopCastOfTo - Insert a cast of V to the specified type,
+/// which must be possible with a noop cast, doing what we can to share
+/// the casts.
+Value *SCEVExpander::InsertNoopCastOfTo(Value *V, const Type *Ty) {
+ Instruction::CastOps Op = CastInst::getCastOpcode(V, false, Ty, false);
+ assert((Op == Instruction::BitCast ||
+ Op == Instruction::PtrToInt ||
+ Op == Instruction::IntToPtr) &&
+ "InsertNoopCastOfTo cannot perform non-noop casts!");
+ assert(SE.getTypeSizeInBits(V->getType()) == SE.getTypeSizeInBits(Ty) &&
+ "InsertNoopCastOfTo cannot change sizes!");
+
// Short-circuit unnecessary bitcasts.
- if (opcode == Instruction::BitCast && V->getType() == Ty)
+ if (Op == Instruction::BitCast && V->getType() == Ty)
return V;
// Short-circuit unnecessary inttoptr<->ptrtoint casts.
- if ((opcode == Instruction::PtrToInt || opcode == Instruction::IntToPtr) &&
+ if ((Op == Instruction::PtrToInt || Op == Instruction::IntToPtr) &&
SE.getTypeSizeInBits(Ty) == SE.getTypeSizeInBits(V->getType())) {
if (CastInst *CI = dyn_cast<CastInst>(V))
if ((CI->getOpcode() == Instruction::PtrToInt ||
return CE->getOperand(0);
}
- // FIXME: keep track of the cast instruction.
+ // Fold a cast of a constant.
if (Constant *C = dyn_cast<Constant>(V))
- return ConstantExpr::getCast(opcode, C, Ty);
-
+ return ConstantExpr::getCast(Op, C, Ty);
+
+ // Cast the argument at the beginning of the entry block, after
+ // any bitcasts of other arguments.
if (Argument *A = dyn_cast<Argument>(V)) {
- // Check to see if there is already a cast!
- for (Value::use_iterator UI = A->use_begin(), E = A->use_end();
- UI != E; ++UI) {
- if ((*UI)->getType() == Ty)
- if (CastInst *CI = dyn_cast<CastInst>(cast<Instruction>(*UI)))
- if (CI->getOpcode() == opcode) {
- // If the cast isn't the first instruction of the function, move it.
- if (BasicBlock::iterator(CI) !=
- A->getParent()->getEntryBlock().begin()) {
- // If the CastInst is the insert point, change the insert point.
- if (CI == InsertPt) ++InsertPt;
- // Splice the cast at the beginning of the entry block.
- CI->moveBefore(A->getParent()->getEntryBlock().begin());
- }
- return CI;
- }
- }
- Instruction *I = CastInst::Create(opcode, V, Ty, V->getName(),
- A->getParent()->getEntryBlock().begin());
- InsertedValues.insert(I);
- return I;
+ BasicBlock::iterator IP = A->getParent()->getEntryBlock().begin();
+ while ((isa<BitCastInst>(IP) &&
+ isa<Argument>(cast<BitCastInst>(IP)->getOperand(0)) &&
+ cast<BitCastInst>(IP)->getOperand(0) != A) ||
+ isa<DbgInfoIntrinsic>(IP))
+ ++IP;
+ return ReuseOrCreateCast(A, Ty, Op, IP);
}
+ // Cast the instruction immediately after the instruction.
Instruction *I = cast<Instruction>(V);
-
- // Check to see if there is already a cast. If there is, use it.
- for (Value::use_iterator UI = I->use_begin(), E = I->use_end();
- UI != E; ++UI) {
- if ((*UI)->getType() == Ty)
- if (CastInst *CI = dyn_cast<CastInst>(cast<Instruction>(*UI)))
- if (CI->getOpcode() == opcode) {
- BasicBlock::iterator It = I; ++It;
- if (isa<InvokeInst>(I))
- It = cast<InvokeInst>(I)->getNormalDest()->begin();
- while (isa<PHINode>(It)) ++It;
- if (It != BasicBlock::iterator(CI)) {
- // If the CastInst is the insert point, change the insert point.
- if (CI == InsertPt) ++InsertPt;
- // Splice the cast immediately after the operand in question.
- CI->moveBefore(It);
- }
- return CI;
- }
- }
BasicBlock::iterator IP = I; ++IP;
if (InvokeInst *II = dyn_cast<InvokeInst>(I))
IP = II->getNormalDest()->begin();
- while (isa<PHINode>(IP)) ++IP;
- Instruction *CI = CastInst::Create(opcode, V, Ty, V->getName(), IP);
- InsertedValues.insert(CI);
- return CI;
-}
-
-/// InsertNoopCastOfTo - Insert a cast of V to the specified type,
-/// which must be possible with a noop cast.
-Value *SCEVExpander::InsertNoopCastOfTo(Value *V, const Type *Ty) {
- Instruction::CastOps Op = CastInst::getCastOpcode(V, false, Ty, false);
- assert((Op == Instruction::BitCast ||
- Op == Instruction::PtrToInt ||
- Op == Instruction::IntToPtr) &&
- "InsertNoopCastOfTo cannot perform non-noop casts!");
- assert(SE.getTypeSizeInBits(V->getType()) == SE.getTypeSizeInBits(Ty) &&
- "InsertNoopCastOfTo cannot change sizes!");
- return InsertCastOfTo(Op, V, Ty);
+ while (isa<PHINode>(IP) || isa<DbgInfoIntrinsic>(IP)) ++IP;
+ return ReuseOrCreateCast(I, Ty, Op, IP);
}
/// InsertBinop - Insert the specified binary operator, doing a small amount
/// of work to avoid inserting an obviously redundant operation.
-Value *SCEVExpander::InsertBinop(Instruction::BinaryOps Opcode, Value *LHS,
- Value *RHS, BasicBlock::iterator InsertPt) {
+Value *SCEVExpander::InsertBinop(Instruction::BinaryOps Opcode,
+ Value *LHS, Value *RHS) {
// Fold a binop with constant operands.
if (Constant *CLHS = dyn_cast<Constant>(LHS))
if (Constant *CRHS = dyn_cast<Constant>(RHS))
// Do a quick scan to see if we have this binop nearby. If so, reuse it.
unsigned ScanLimit = 6;
- BasicBlock::iterator BlockBegin = InsertPt->getParent()->begin();
- if (InsertPt != BlockBegin) {
- // Scanning starts from the last instruction before InsertPt.
- BasicBlock::iterator IP = InsertPt;
+ BasicBlock::iterator BlockBegin = Builder.GetInsertBlock()->begin();
+ // Scanning starts from the last instruction before the insertion point.
+ BasicBlock::iterator IP = Builder.GetInsertPoint();
+ if (IP != BlockBegin) {
--IP;
for (; ScanLimit; --IP, --ScanLimit) {
+ // Don't count dbg.value against the ScanLimit, to avoid perturbing the
+ // generated code.
+ if (isa<DbgInfoIntrinsic>(IP))
+ ScanLimit++;
if (IP->getOpcode() == (unsigned)Opcode && IP->getOperand(0) == LHS &&
IP->getOperand(1) == RHS)
return IP;
if (IP == BlockBegin) break;
}
}
-
+
+ // Save the original insertion point so we can restore it when we're done.
+ BasicBlock *SaveInsertBB = Builder.GetInsertBlock();
+ BasicBlock::iterator SaveInsertPt = Builder.GetInsertPoint();
+
+ // Move the insertion point out of as many loops as we can.
+ while (const Loop *L = SE.LI->getLoopFor(Builder.GetInsertBlock())) {
+ if (!L->isLoopInvariant(LHS) || !L->isLoopInvariant(RHS)) break;
+ BasicBlock *Preheader = L->getLoopPreheader();
+ if (!Preheader) break;
+
+ // Ok, move up a level.
+ Builder.SetInsertPoint(Preheader, Preheader->getTerminator());
+ }
+
// If we haven't found this binop, insert it.
- Instruction *BO = BinaryOperator::Create(Opcode, LHS, RHS, "tmp", InsertPt);
- InsertedValues.insert(BO);
+ Value *BO = Builder.CreateBinOp(Opcode, LHS, RHS, "tmp");
+ rememberInstruction(BO);
+
+ // Restore the original insert point.
+ if (SaveInsertBB)
+ restoreInsertPoint(SaveInsertBB, SaveInsertPt);
+
return BO;
}
-/// FactorOutConstant - Test if S is evenly divisible by Factor, using signed
+/// FactorOutConstant - Test if S is divisible by Factor, using signed
/// division. If so, update S with Factor divided out and return true.
+/// S need not be evenly divisible if a reasonable remainder can be
+/// computed.
/// TODO: When ScalarEvolution gets a SCEVSDivExpr, this can be made
/// unnecessary; in its place, just signed-divide Ops[i] by the scale and
/// check to see if the divide was folded.
-static bool FactorOutConstant(SCEVHandle &S,
- const APInt &Factor,
- ScalarEvolution &SE) {
+static bool FactorOutConstant(const SCEV *&S,
+ const SCEV *&Remainder,
+ const SCEV *Factor,
+ ScalarEvolution &SE,
+ const TargetData *TD) {
// Everything is divisible by one.
- if (Factor == 1)
+ if (Factor->isOne())
return true;
+ // x/x == 1.
+ if (S == Factor) {
+ S = SE.getConstant(S->getType(), 1);
+ return true;
+ }
+
// For a Constant, check for a multiple of the given factor.
- if (const SCEVConstant *C = dyn_cast<SCEVConstant>(S))
- if (!C->getValue()->getValue().srem(Factor)) {
- ConstantInt *CI =
- ConstantInt::get(C->getValue()->getValue().sdiv(Factor));
- SCEVHandle Div = SE.getConstant(CI);
- S = Div;
+ if (const SCEVConstant *C = dyn_cast<SCEVConstant>(S)) {
+ // 0/x == 0.
+ if (C->isZero())
return true;
+ // Check for divisibility.
+ if (const SCEVConstant *FC = dyn_cast<SCEVConstant>(Factor)) {
+ ConstantInt *CI =
+ ConstantInt::get(SE.getContext(),
+ C->getValue()->getValue().sdiv(
+ FC->getValue()->getValue()));
+ // If the quotient is zero and the remainder is non-zero, reject
+ // the value at this scale. It will be considered for subsequent
+ // smaller scales.
+ if (!CI->isZero()) {
+ const SCEV *Div = SE.getConstant(CI);
+ S = Div;
+ Remainder =
+ SE.getAddExpr(Remainder,
+ SE.getConstant(C->getValue()->getValue().srem(
+ FC->getValue()->getValue())));
+ return true;
+ }
}
+ }
// In a Mul, check if there is a constant operand which is a multiple
// of the given factor.
- if (const SCEVMulExpr *M = dyn_cast<SCEVMulExpr>(S))
- if (const SCEVConstant *C = dyn_cast<SCEVConstant>(M->getOperand(0)))
- if (!C->getValue()->getValue().srem(Factor)) {
- std::vector<SCEVHandle> NewMulOps(M->getOperands());
- NewMulOps[0] =
- SE.getConstant(C->getValue()->getValue().sdiv(Factor));
- S = SE.getMulExpr(NewMulOps);
- return true;
+ if (const SCEVMulExpr *M = dyn_cast<SCEVMulExpr>(S)) {
+ if (TD) {
+ // With TargetData, the size is known. Check if there is a constant
+ // operand which is a multiple of the given factor. If so, we can
+ // factor it.
+ const SCEVConstant *FC = cast<SCEVConstant>(Factor);
+ if (const SCEVConstant *C = dyn_cast<SCEVConstant>(M->getOperand(0)))
+ if (!C->getValue()->getValue().srem(FC->getValue()->getValue())) {
+ SmallVector<const SCEV *, 4> NewMulOps(M->op_begin(), M->op_end());
+ NewMulOps[0] =
+ SE.getConstant(C->getValue()->getValue().sdiv(
+ FC->getValue()->getValue()));
+ S = SE.getMulExpr(NewMulOps);
+ return true;
+ }
+ } else {
+ // Without TargetData, check if Factor can be factored out of any of the
+ // Mul's operands. If so, we can just remove it.
+ for (unsigned i = 0, e = M->getNumOperands(); i != e; ++i) {
+ const SCEV *SOp = M->getOperand(i);
+ const SCEV *Remainder = SE.getConstant(SOp->getType(), 0);
+ if (FactorOutConstant(SOp, Remainder, Factor, SE, TD) &&
+ Remainder->isZero()) {
+ SmallVector<const SCEV *, 4> NewMulOps(M->op_begin(), M->op_end());
+ NewMulOps[i] = SOp;
+ S = SE.getMulExpr(NewMulOps);
+ return true;
+ }
}
+ }
+ }
// In an AddRec, check if both start and step are divisible.
if (const SCEVAddRecExpr *A = dyn_cast<SCEVAddRecExpr>(S)) {
- SCEVHandle Start = A->getStart();
- if (!FactorOutConstant(Start, Factor, SE))
+ const SCEV *Step = A->getStepRecurrence(SE);
+ const SCEV *StepRem = SE.getConstant(Step->getType(), 0);
+ if (!FactorOutConstant(Step, StepRem, Factor, SE, TD))
return false;
- SCEVHandle Step = A->getStepRecurrence(SE);
- if (!FactorOutConstant(Step, Factor, SE))
+ if (!StepRem->isZero())
+ return false;
+ const SCEV *Start = A->getStart();
+ if (!FactorOutConstant(Start, Remainder, Factor, SE, TD))
return false;
S = SE.getAddRecExpr(Start, Step, A->getLoop());
return true;
return false;
}
-/// expandAddToGEP - Expand a SCEVAddExpr with a pointer type into a GEP
-/// instead of using ptrtoint+arithmetic+inttoptr. This helps
-/// BasicAliasAnalysis analyze the result. However, it suffers from the
-/// underlying bug described in PR2831. Addition in LLVM currently always
-/// has two's complement wrapping guaranteed. However, the semantics for
-/// getelementptr overflow are ambiguous. In the common case though, this
-/// expansion gets used when a GEP in the original code has been converted
-/// into integer arithmetic, in which case the resulting code will be no
-/// more undefined than it was originally.
+/// SimplifyAddOperands - Sort and simplify a list of add operands. NumAddRecs
+/// is the number of SCEVAddRecExprs present, which are kept at the end of
+/// the list.
+///
+static void SimplifyAddOperands(SmallVectorImpl<const SCEV *> &Ops,
+ const Type *Ty,
+ ScalarEvolution &SE) {
+ unsigned NumAddRecs = 0;
+ for (unsigned i = Ops.size(); i > 0 && isa<SCEVAddRecExpr>(Ops[i-1]); --i)
+ ++NumAddRecs;
+ // Group Ops into non-addrecs and addrecs.
+ SmallVector<const SCEV *, 8> NoAddRecs(Ops.begin(), Ops.end() - NumAddRecs);
+ SmallVector<const SCEV *, 8> AddRecs(Ops.end() - NumAddRecs, Ops.end());
+ // Let ScalarEvolution sort and simplify the non-addrecs list.
+ const SCEV *Sum = NoAddRecs.empty() ?
+ SE.getConstant(Ty, 0) :
+ SE.getAddExpr(NoAddRecs);
+ // If it returned an add, use the operands. Otherwise it simplified
+ // the sum into a single value, so just use that.
+ Ops.clear();
+ if (const SCEVAddExpr *Add = dyn_cast<SCEVAddExpr>(Sum))
+ Ops.append(Add->op_begin(), Add->op_end());
+ else if (!Sum->isZero())
+ Ops.push_back(Sum);
+ // Then append the addrecs.
+ Ops.append(AddRecs.begin(), AddRecs.end());
+}
+
+/// SplitAddRecs - Flatten a list of add operands, moving addrec start values
+/// out to the top level. For example, convert {a + b,+,c} to a, b, {0,+,d}.
+/// This helps expose more opportunities for folding parts of the expressions
+/// into GEP indices.
+///
+static void SplitAddRecs(SmallVectorImpl<const SCEV *> &Ops,
+ const Type *Ty,
+ ScalarEvolution &SE) {
+ // Find the addrecs.
+ SmallVector<const SCEV *, 8> AddRecs;
+ for (unsigned i = 0, e = Ops.size(); i != e; ++i)
+ while (const SCEVAddRecExpr *A = dyn_cast<SCEVAddRecExpr>(Ops[i])) {
+ const SCEV *Start = A->getStart();
+ if (Start->isZero()) break;
+ const SCEV *Zero = SE.getConstant(Ty, 0);
+ AddRecs.push_back(SE.getAddRecExpr(Zero,
+ A->getStepRecurrence(SE),
+ A->getLoop()));
+ if (const SCEVAddExpr *Add = dyn_cast<SCEVAddExpr>(Start)) {
+ Ops[i] = Zero;
+ Ops.append(Add->op_begin(), Add->op_end());
+ e += Add->getNumOperands();
+ } else {
+ Ops[i] = Start;
+ }
+ }
+ if (!AddRecs.empty()) {
+ // Add the addrecs onto the end of the list.
+ Ops.append(AddRecs.begin(), AddRecs.end());
+ // Resort the operand list, moving any constants to the front.
+ SimplifyAddOperands(Ops, Ty, SE);
+ }
+}
+
+/// expandAddToGEP - Expand an addition expression with a pointer type into
+/// a GEP instead of using ptrtoint+arithmetic+inttoptr. This helps
+/// BasicAliasAnalysis and other passes analyze the result. See the rules
+/// for getelementptr vs. inttoptr in
+/// http://llvm.org/docs/LangRef.html#pointeraliasing
+/// for details.
+///
+/// Design note: The correctness of using getelementptr here depends on
+/// ScalarEvolution not recognizing inttoptr and ptrtoint operators, as
+/// they may introduce pointer arithmetic which may not be safely converted
+/// into getelementptr.
///
/// Design note: It might seem desirable for this function to be more
/// loop-aware. If some of the indices are loop-invariant while others
/// loop-invariant portions of expressions, after considering what
/// can be folded using target addressing modes.
///
-Value *SCEVExpander::expandAddToGEP(const SCEVHandle *op_begin,
- const SCEVHandle *op_end,
+Value *SCEVExpander::expandAddToGEP(const SCEV *const *op_begin,
+ const SCEV *const *op_end,
const PointerType *PTy,
const Type *Ty,
Value *V) {
const Type *ElTy = PTy->getElementType();
SmallVector<Value *, 4> GepIndices;
- std::vector<SCEVHandle> Ops(op_begin, op_end);
+ SmallVector<const SCEV *, 8> Ops(op_begin, op_end);
bool AnyNonZeroIndices = false;
- // Decend down the pointer's type and attempt to convert the other
+ // Split AddRecs up into parts as either of the parts may be usable
+ // without the other.
+ SplitAddRecs(Ops, Ty, SE);
+
+ // Descend down the pointer's type and attempt to convert the other
// operands into GEP indices, at each level. The first index in a GEP
// indexes into the array implied by the pointer operand; the rest of
// the indices index into the element or field type selected by the
// preceding index.
for (;;) {
- APInt ElSize = APInt(SE.getTypeSizeInBits(Ty),
- ElTy->isSized() ? SE.TD->getTypeAllocSize(ElTy) : 0);
- std::vector<SCEVHandle> NewOps;
- std::vector<SCEVHandle> ScaledOps;
- for (unsigned i = 0, e = Ops.size(); i != e; ++i) {
- // Split AddRecs up into parts as either of the parts may be usable
- // without the other.
- if (const SCEVAddRecExpr *A = dyn_cast<SCEVAddRecExpr>(Ops[i]))
- if (!A->getStart()->isZero()) {
- SCEVHandle Start = A->getStart();
- Ops.push_back(SE.getAddRecExpr(SE.getIntegerSCEV(0, A->getType()),
- A->getStepRecurrence(SE),
- A->getLoop()));
- Ops[i] = Start;
- ++e;
+ // If the scale size is not 0, attempt to factor out a scale for
+ // array indexing.
+ SmallVector<const SCEV *, 8> ScaledOps;
+ if (ElTy->isSized()) {
+ const SCEV *ElSize = SE.getSizeOfExpr(ElTy);
+ if (!ElSize->isZero()) {
+ SmallVector<const SCEV *, 8> NewOps;
+ for (unsigned i = 0, e = Ops.size(); i != e; ++i) {
+ const SCEV *Op = Ops[i];
+ const SCEV *Remainder = SE.getConstant(Ty, 0);
+ if (FactorOutConstant(Op, Remainder, ElSize, SE, SE.TD)) {
+ // Op now has ElSize factored out.
+ ScaledOps.push_back(Op);
+ if (!Remainder->isZero())
+ NewOps.push_back(Remainder);
+ AnyNonZeroIndices = true;
+ } else {
+ // The operand was not divisible, so add it to the list of operands
+ // we'll scan next iteration.
+ NewOps.push_back(Ops[i]);
+ }
}
- // If the scale size is not 0, attempt to factor out a scale.
- if (ElSize != 0) {
- SCEVHandle Op = Ops[i];
- if (FactorOutConstant(Op, ElSize, SE)) {
- ScaledOps.push_back(Op); // Op now has ElSize factored out.
- continue;
+ // If we made any changes, update Ops.
+ if (!ScaledOps.empty()) {
+ Ops = NewOps;
+ SimplifyAddOperands(Ops, Ty, SE);
}
}
- // If the operand was not divisible, add it to the list of operands
- // we'll scan next iteration.
- NewOps.push_back(Ops[i]);
}
- Ops = NewOps;
- AnyNonZeroIndices |= !ScaledOps.empty();
+
+ // Record the scaled array index for this level of the type. If
+ // we didn't find any operands that could be factored, tentatively
+ // assume that element zero was selected (since the zero offset
+ // would obviously be folded away).
Value *Scaled = ScaledOps.empty() ?
Constant::getNullValue(Ty) :
expandCodeFor(SE.getAddExpr(ScaledOps), Ty);
GepIndices.push_back(Scaled);
// Collect struct field index operands.
- if (!Ops.empty())
- while (const StructType *STy = dyn_cast<StructType>(ElTy)) {
+ while (const StructType *STy = dyn_cast<StructType>(ElTy)) {
+ bool FoundFieldNo = false;
+ // An empty struct has no fields.
+ if (STy->getNumElements() == 0) break;
+ if (SE.TD) {
+ // With TargetData, field offsets are known. See if a constant offset
+ // falls within any of the struct fields.
+ if (Ops.empty()) break;
if (const SCEVConstant *C = dyn_cast<SCEVConstant>(Ops[0]))
if (SE.getTypeSizeInBits(C->getType()) <= 64) {
const StructLayout &SL = *SE.TD->getStructLayout(STy);
uint64_t FullOffset = C->getValue()->getZExtValue();
if (FullOffset < SL.getSizeInBytes()) {
unsigned ElIdx = SL.getElementContainingOffset(FullOffset);
- GepIndices.push_back(ConstantInt::get(Type::Int32Ty, ElIdx));
+ GepIndices.push_back(
+ ConstantInt::get(Type::getInt32Ty(Ty->getContext()), ElIdx));
ElTy = STy->getTypeAtIndex(ElIdx);
Ops[0] =
- SE.getConstant(ConstantInt::get(Ty,
- FullOffset -
- SL.getElementOffset(ElIdx)));
+ SE.getConstant(Ty, FullOffset - SL.getElementOffset(ElIdx));
AnyNonZeroIndices = true;
- continue;
+ FoundFieldNo = true;
+ }
+ }
+ } else {
+ // Without TargetData, just check for an offsetof expression of the
+ // appropriate struct type.
+ for (unsigned i = 0, e = Ops.size(); i != e; ++i)
+ if (const SCEVUnknown *U = dyn_cast<SCEVUnknown>(Ops[i])) {
+ const Type *CTy;
+ Constant *FieldNo;
+ if (U->isOffsetOf(CTy, FieldNo) && CTy == STy) {
+ GepIndices.push_back(FieldNo);
+ ElTy =
+ STy->getTypeAtIndex(cast<ConstantInt>(FieldNo)->getZExtValue());
+ Ops[i] = SE.getConstant(Ty, 0);
+ AnyNonZeroIndices = true;
+ FoundFieldNo = true;
+ break;
}
}
- break;
}
+ // If no struct field offsets were found, tentatively assume that
+ // field zero was selected (since the zero offset would obviously
+ // be folded away).
+ if (!FoundFieldNo) {
+ ElTy = STy->getTypeAtIndex(0u);
+ GepIndices.push_back(
+ Constant::getNullValue(Type::getInt32Ty(Ty->getContext())));
+ }
+ }
- if (const ArrayType *ATy = dyn_cast<ArrayType>(ElTy)) {
+ if (const ArrayType *ATy = dyn_cast<ArrayType>(ElTy))
ElTy = ATy->getElementType();
- continue;
- }
- break;
+ else
+ break;
}
- // If none of the operands were convertable to proper GEP indices, cast
+ // If none of the operands were convertible to proper GEP indices, cast
// the base to i8* and do an ugly getelementptr with that. It's still
// better than ptrtoint+arithmetic+inttoptr at least.
if (!AnyNonZeroIndices) {
+ // Cast the base to i8*.
V = InsertNoopCastOfTo(V,
- Type::Int8Ty->getPointerTo(PTy->getAddressSpace()));
- Value *Idx = expand(SE.getAddExpr(Ops));
- Idx = InsertNoopCastOfTo(Idx, Ty);
+ Type::getInt8PtrTy(Ty->getContext(), PTy->getAddressSpace()));
+
+ // Expand the operands for a plain byte offset.
+ Value *Idx = expandCodeFor(SE.getAddExpr(Ops), Ty);
// Fold a GEP with constant operands.
if (Constant *CLHS = dyn_cast<Constant>(V))
// Do a quick scan to see if we have this GEP nearby. If so, reuse it.
unsigned ScanLimit = 6;
- BasicBlock::iterator BlockBegin = InsertPt->getParent()->begin();
- if (InsertPt != BlockBegin) {
- // Scanning starts from the last instruction before InsertPt.
- BasicBlock::iterator IP = InsertPt;
+ BasicBlock::iterator BlockBegin = Builder.GetInsertBlock()->begin();
+ // Scanning starts from the last instruction before the insertion point.
+ BasicBlock::iterator IP = Builder.GetInsertPoint();
+ if (IP != BlockBegin) {
--IP;
for (; ScanLimit; --IP, --ScanLimit) {
+ // Don't count dbg.value against the ScanLimit, to avoid perturbing the
+ // generated code.
+ if (isa<DbgInfoIntrinsic>(IP))
+ ScanLimit++;
if (IP->getOpcode() == Instruction::GetElementPtr &&
IP->getOperand(0) == V && IP->getOperand(1) == Idx)
return IP;
}
}
- Value *GEP = GetElementPtrInst::Create(V, Idx, "scevgep", InsertPt);
- InsertedValues.insert(GEP);
+ // Save the original insertion point so we can restore it when we're done.
+ BasicBlock *SaveInsertBB = Builder.GetInsertBlock();
+ BasicBlock::iterator SaveInsertPt = Builder.GetInsertPoint();
+
+ // Move the insertion point out of as many loops as we can.
+ while (const Loop *L = SE.LI->getLoopFor(Builder.GetInsertBlock())) {
+ if (!L->isLoopInvariant(V) || !L->isLoopInvariant(Idx)) break;
+ BasicBlock *Preheader = L->getLoopPreheader();
+ if (!Preheader) break;
+
+ // Ok, move up a level.
+ Builder.SetInsertPoint(Preheader, Preheader->getTerminator());
+ }
+
+ // Emit a GEP.
+ Value *GEP = Builder.CreateGEP(V, Idx, "uglygep");
+ rememberInstruction(GEP);
+
+ // Restore the original insert point.
+ if (SaveInsertBB)
+ restoreInsertPoint(SaveInsertBB, SaveInsertPt);
+
return GEP;
}
- // Insert a pretty getelementptr.
- Value *GEP = GetElementPtrInst::Create(V,
- GepIndices.begin(),
- GepIndices.end(),
- "scevgep", InsertPt);
+ // Save the original insertion point so we can restore it when we're done.
+ BasicBlock *SaveInsertBB = Builder.GetInsertBlock();
+ BasicBlock::iterator SaveInsertPt = Builder.GetInsertPoint();
+
+ // Move the insertion point out of as many loops as we can.
+ while (const Loop *L = SE.LI->getLoopFor(Builder.GetInsertBlock())) {
+ if (!L->isLoopInvariant(V)) break;
+
+ bool AnyIndexNotLoopInvariant = false;
+ for (SmallVectorImpl<Value *>::const_iterator I = GepIndices.begin(),
+ E = GepIndices.end(); I != E; ++I)
+ if (!L->isLoopInvariant(*I)) {
+ AnyIndexNotLoopInvariant = true;
+ break;
+ }
+ if (AnyIndexNotLoopInvariant)
+ break;
+
+ BasicBlock *Preheader = L->getLoopPreheader();
+ if (!Preheader) break;
+
+ // Ok, move up a level.
+ Builder.SetInsertPoint(Preheader, Preheader->getTerminator());
+ }
+
+ // Insert a pretty getelementptr. Note that this GEP is not marked inbounds,
+ // because ScalarEvolution may have changed the address arithmetic to
+ // compute a value which is beyond the end of the allocated object.
+ Value *Casted = V;
+ if (V->getType() != PTy)
+ Casted = InsertNoopCastOfTo(Casted, PTy);
+ Value *GEP = Builder.CreateGEP(Casted,
+ GepIndices.begin(),
+ GepIndices.end(),
+ "scevgep");
Ops.push_back(SE.getUnknown(GEP));
- InsertedValues.insert(GEP);
+ rememberInstruction(GEP);
+
+ // Restore the original insert point.
+ if (SaveInsertBB)
+ restoreInsertPoint(SaveInsertBB, SaveInsertPt);
+
return expand(SE.getAddExpr(Ops));
}
+/// isNonConstantNegative - Return true if the specified scev is negated, but
+/// not a constant.
+static bool isNonConstantNegative(const SCEV *F) {
+ const SCEVMulExpr *Mul = dyn_cast<SCEVMulExpr>(F);
+ if (!Mul) return false;
+
+ // If there is a constant factor, it will be first.
+ const SCEVConstant *SC = dyn_cast<SCEVConstant>(Mul->getOperand(0));
+ if (!SC) return false;
+
+ // Return true if the value is negative, this matches things like (-42 * V).
+ return SC->getValue()->getValue().isNegative();
+}
+
+/// PickMostRelevantLoop - Given two loops pick the one that's most relevant for
+/// SCEV expansion. If they are nested, this is the most nested. If they are
+/// neighboring, pick the later.
+static const Loop *PickMostRelevantLoop(const Loop *A, const Loop *B,
+ DominatorTree &DT) {
+ if (!A) return B;
+ if (!B) return A;
+ if (A->contains(B)) return B;
+ if (B->contains(A)) return A;
+ if (DT.dominates(A->getHeader(), B->getHeader())) return B;
+ if (DT.dominates(B->getHeader(), A->getHeader())) return A;
+ return A; // Arbitrarily break the tie.
+}
+
+/// GetRelevantLoop - Get the most relevant loop associated with the given
+/// expression, according to PickMostRelevantLoop.
+static const Loop *GetRelevantLoop(const SCEV *S, LoopInfo &LI,
+ DominatorTree &DT) {
+ if (isa<SCEVConstant>(S))
+ return 0;
+ if (const SCEVUnknown *U = dyn_cast<SCEVUnknown>(S)) {
+ if (const Instruction *I = dyn_cast<Instruction>(U->getValue()))
+ return LI.getLoopFor(I->getParent());
+ return 0;
+ }
+ if (const SCEVNAryExpr *N = dyn_cast<SCEVNAryExpr>(S)) {
+ const Loop *L = 0;
+ if (const SCEVAddRecExpr *AR = dyn_cast<SCEVAddRecExpr>(S))
+ L = AR->getLoop();
+ for (SCEVNAryExpr::op_iterator I = N->op_begin(), E = N->op_end();
+ I != E; ++I)
+ L = PickMostRelevantLoop(L, GetRelevantLoop(*I, LI, DT), DT);
+ return L;
+ }
+ if (const SCEVCastExpr *C = dyn_cast<SCEVCastExpr>(S))
+ return GetRelevantLoop(C->getOperand(), LI, DT);
+ if (const SCEVUDivExpr *D = dyn_cast<SCEVUDivExpr>(S))
+ return PickMostRelevantLoop(GetRelevantLoop(D->getLHS(), LI, DT),
+ GetRelevantLoop(D->getRHS(), LI, DT),
+ DT);
+ llvm_unreachable("Unexpected SCEV type!");
+}
+
+namespace {
+
+/// LoopCompare - Compare loops by PickMostRelevantLoop.
+class LoopCompare {
+ DominatorTree &DT;
+public:
+ explicit LoopCompare(DominatorTree &dt) : DT(dt) {}
+
+ bool operator()(std::pair<const Loop *, const SCEV *> LHS,
+ std::pair<const Loop *, const SCEV *> RHS) const {
+ // Keep pointer operands sorted at the end.
+ if (LHS.second->getType()->isPointerTy() !=
+ RHS.second->getType()->isPointerTy())
+ return LHS.second->getType()->isPointerTy();
+
+ // Compare loops with PickMostRelevantLoop.
+ if (LHS.first != RHS.first)
+ return PickMostRelevantLoop(LHS.first, RHS.first, DT) != LHS.first;
+
+ // If one operand is a non-constant negative and the other is not,
+ // put the non-constant negative on the right so that a sub can
+ // be used instead of a negate and add.
+ if (isNonConstantNegative(LHS.second)) {
+ if (!isNonConstantNegative(RHS.second))
+ return false;
+ } else if (isNonConstantNegative(RHS.second))
+ return true;
+
+ // Otherwise they are equivalent according to this comparison.
+ return false;
+ }
+};
+
+}
+
Value *SCEVExpander::visitAddExpr(const SCEVAddExpr *S) {
const Type *Ty = SE.getEffectiveSCEVType(S->getType());
- Value *V = expand(S->getOperand(S->getNumOperands()-1));
-
- // Turn things like ptrtoint+arithmetic+inttoptr into GEP. See the
- // comments on expandAddToGEP for details.
- if (SE.TD)
- if (const PointerType *PTy = dyn_cast<PointerType>(V->getType())) {
- const std::vector<SCEVHandle> &Ops = S->getOperands();
- return expandAddToGEP(&Ops[0], &Ops[Ops.size() - 1],
- PTy, Ty, V);
- }
- V = InsertNoopCastOfTo(V, Ty);
+ // Collect all the add operands in a loop, along with their associated loops.
+ // Iterate in reverse so that constants are emitted last, all else equal, and
+ // so that pointer operands are inserted first, which the code below relies on
+ // to form more involved GEPs.
+ SmallVector<std::pair<const Loop *, const SCEV *>, 8> OpsAndLoops;
+ for (std::reverse_iterator<SCEVAddExpr::op_iterator> I(S->op_end()),
+ E(S->op_begin()); I != E; ++I)
+ OpsAndLoops.push_back(std::make_pair(GetRelevantLoop(*I, *SE.LI, *SE.DT),
+ *I));
- // Emit a bunch of add instructions
- for (int i = S->getNumOperands()-2; i >= 0; --i) {
- Value *W = expand(S->getOperand(i));
- W = InsertNoopCastOfTo(W, Ty);
- V = InsertBinop(Instruction::Add, V, W, InsertPt);
+ // Sort by loop. Use a stable sort so that constants follow non-constants and
+ // pointer operands precede non-pointer operands.
+ std::stable_sort(OpsAndLoops.begin(), OpsAndLoops.end(), LoopCompare(*SE.DT));
+
+ // Emit instructions to add all the operands. Hoist as much as possible
+ // out of loops, and form meaningful getelementptrs where possible.
+ Value *Sum = 0;
+ for (SmallVectorImpl<std::pair<const Loop *, const SCEV *> >::iterator
+ I = OpsAndLoops.begin(), E = OpsAndLoops.end(); I != E; ) {
+ const Loop *CurLoop = I->first;
+ const SCEV *Op = I->second;
+ if (!Sum) {
+ // This is the first operand. Just expand it.
+ Sum = expand(Op);
+ ++I;
+ } else if (const PointerType *PTy = dyn_cast<PointerType>(Sum->getType())) {
+ // The running sum expression is a pointer. Try to form a getelementptr
+ // at this level with that as the base.
+ SmallVector<const SCEV *, 4> NewOps;
+ for (; I != E && I->first == CurLoop; ++I) {
+ // If the operand is SCEVUnknown and not instructions, peek through
+ // it, to enable more of it to be folded into the GEP.
+ const SCEV *X = I->second;
+ if (const SCEVUnknown *U = dyn_cast<SCEVUnknown>(X))
+ if (!isa<Instruction>(U->getValue()))
+ X = SE.getSCEV(U->getValue());
+ NewOps.push_back(X);
+ }
+ Sum = expandAddToGEP(NewOps.begin(), NewOps.end(), PTy, Ty, Sum);
+ } else if (const PointerType *PTy = dyn_cast<PointerType>(Op->getType())) {
+ // The running sum is an integer, and there's a pointer at this level.
+ // Try to form a getelementptr. If the running sum is instructions,
+ // use a SCEVUnknown to avoid re-analyzing them.
+ SmallVector<const SCEV *, 4> NewOps;
+ NewOps.push_back(isa<Instruction>(Sum) ? SE.getUnknown(Sum) :
+ SE.getSCEV(Sum));
+ for (++I; I != E && I->first == CurLoop; ++I)
+ NewOps.push_back(I->second);
+ Sum = expandAddToGEP(NewOps.begin(), NewOps.end(), PTy, Ty, expand(Op));
+ } else if (isNonConstantNegative(Op)) {
+ // Instead of doing a negate and add, just do a subtract.
+ Value *W = expandCodeFor(SE.getNegativeSCEV(Op), Ty);
+ Sum = InsertNoopCastOfTo(Sum, Ty);
+ Sum = InsertBinop(Instruction::Sub, Sum, W);
+ ++I;
+ } else {
+ // A simple add.
+ Value *W = expandCodeFor(Op, Ty);
+ Sum = InsertNoopCastOfTo(Sum, Ty);
+ // Canonicalize a constant to the RHS.
+ if (isa<Constant>(Sum)) std::swap(Sum, W);
+ Sum = InsertBinop(Instruction::Add, Sum, W);
+ ++I;
+ }
}
- return V;
+
+ return Sum;
}
Value *SCEVExpander::visitMulExpr(const SCEVMulExpr *S) {
const Type *Ty = SE.getEffectiveSCEVType(S->getType());
- int FirstOp = 0; // Set if we should emit a subtract.
- if (const SCEVConstant *SC = dyn_cast<SCEVConstant>(S->getOperand(0)))
- if (SC->getValue()->isAllOnesValue())
- FirstOp = 1;
- int i = S->getNumOperands()-2;
- Value *V = expand(S->getOperand(i+1));
- V = InsertNoopCastOfTo(V, Ty);
+ // Collect all the mul operands in a loop, along with their associated loops.
+ // Iterate in reverse so that constants are emitted last, all else equal.
+ SmallVector<std::pair<const Loop *, const SCEV *>, 8> OpsAndLoops;
+ for (std::reverse_iterator<SCEVMulExpr::op_iterator> I(S->op_end()),
+ E(S->op_begin()); I != E; ++I)
+ OpsAndLoops.push_back(std::make_pair(GetRelevantLoop(*I, *SE.LI, *SE.DT),
+ *I));
- // Emit a bunch of multiply instructions
- for (; i >= FirstOp; --i) {
- Value *W = expand(S->getOperand(i));
- W = InsertNoopCastOfTo(W, Ty);
- V = InsertBinop(Instruction::Mul, V, W, InsertPt);
+ // Sort by loop. Use a stable sort so that constants follow non-constants.
+ std::stable_sort(OpsAndLoops.begin(), OpsAndLoops.end(), LoopCompare(*SE.DT));
+
+ // Emit instructions to mul all the operands. Hoist as much as possible
+ // out of loops.
+ Value *Prod = 0;
+ for (SmallVectorImpl<std::pair<const Loop *, const SCEV *> >::iterator
+ I = OpsAndLoops.begin(), E = OpsAndLoops.end(); I != E; ) {
+ const SCEV *Op = I->second;
+ if (!Prod) {
+ // This is the first operand. Just expand it.
+ Prod = expand(Op);
+ ++I;
+ } else if (Op->isAllOnesValue()) {
+ // Instead of doing a multiply by negative one, just do a negate.
+ Prod = InsertNoopCastOfTo(Prod, Ty);
+ Prod = InsertBinop(Instruction::Sub, Constant::getNullValue(Ty), Prod);
+ ++I;
+ } else {
+ // A simple mul.
+ Value *W = expandCodeFor(Op, Ty);
+ Prod = InsertNoopCastOfTo(Prod, Ty);
+ // Canonicalize a constant to the RHS.
+ if (isa<Constant>(Prod)) std::swap(Prod, W);
+ Prod = InsertBinop(Instruction::Mul, Prod, W);
+ ++I;
+ }
}
- // -1 * ... ---> 0 - ...
- if (FirstOp == 1)
- V = InsertBinop(Instruction::Sub, Constant::getNullValue(Ty), V, InsertPt);
- return V;
+ return Prod;
}
Value *SCEVExpander::visitUDivExpr(const SCEVUDivExpr *S) {
const Type *Ty = SE.getEffectiveSCEVType(S->getType());
- Value *LHS = expand(S->getLHS());
- LHS = InsertNoopCastOfTo(LHS, Ty);
+ Value *LHS = expandCodeFor(S->getLHS(), Ty);
if (const SCEVConstant *SC = dyn_cast<SCEVConstant>(S->getRHS())) {
const APInt &RHS = SC->getValue()->getValue();
if (RHS.isPowerOf2())
return InsertBinop(Instruction::LShr, LHS,
- ConstantInt::get(Ty, RHS.logBase2()),
- InsertPt);
+ ConstantInt::get(Ty, RHS.logBase2()));
}
- Value *RHS = expand(S->getRHS());
- RHS = InsertNoopCastOfTo(RHS, Ty);
- return InsertBinop(Instruction::UDiv, LHS, RHS, InsertPt);
+ Value *RHS = expandCodeFor(S->getRHS(), Ty);
+ return InsertBinop(Instruction::UDiv, LHS, RHS);
}
/// Move parts of Base into Rest to leave Base with the minimal
/// expression that provides a pointer operand suitable for a
/// GEP expansion.
-static void ExposePointerBase(SCEVHandle &Base, SCEVHandle &Rest,
+static void ExposePointerBase(const SCEV *&Base, const SCEV *&Rest,
ScalarEvolution &SE) {
while (const SCEVAddRecExpr *A = dyn_cast<SCEVAddRecExpr>(Base)) {
Base = A->getStart();
Rest = SE.getAddExpr(Rest,
- SE.getAddRecExpr(SE.getIntegerSCEV(0, A->getType()),
+ SE.getAddRecExpr(SE.getConstant(A->getType(), 0),
A->getStepRecurrence(SE),
A->getLoop()));
}
if (const SCEVAddExpr *A = dyn_cast<SCEVAddExpr>(Base)) {
Base = A->getOperand(A->getNumOperands()-1);
- std::vector<SCEVHandle> NewAddOps(A->op_begin(), A->op_end());
+ SmallVector<const SCEV *, 8> NewAddOps(A->op_begin(), A->op_end());
NewAddOps.back() = Rest;
Rest = SE.getAddExpr(NewAddOps);
ExposePointerBase(Base, Rest, SE);
}
}
+/// getAddRecExprPHILiterally - Helper for expandAddRecExprLiterally. Expand
+/// the base addrec, which is the addrec without any non-loop-dominating
+/// values, and return the PHI.
+PHINode *
+SCEVExpander::getAddRecExprPHILiterally(const SCEVAddRecExpr *Normalized,
+ const Loop *L,
+ const Type *ExpandTy,
+ const Type *IntTy) {
+ // Reuse a previously-inserted PHI, if present.
+ for (BasicBlock::iterator I = L->getHeader()->begin();
+ PHINode *PN = dyn_cast<PHINode>(I); ++I)
+ if (SE.isSCEVable(PN->getType()) &&
+ (SE.getEffectiveSCEVType(PN->getType()) ==
+ SE.getEffectiveSCEVType(Normalized->getType())) &&
+ SE.getSCEV(PN) == Normalized)
+ if (BasicBlock *LatchBlock = L->getLoopLatch()) {
+ Instruction *IncV =
+ cast<Instruction>(PN->getIncomingValueForBlock(LatchBlock));
+
+ // Determine if this is a well-behaved chain of instructions leading
+ // back to the PHI. It probably will be, if we're scanning an inner
+ // loop already visited by LSR for example, but it wouldn't have
+ // to be.
+ do {
+ if (IncV->getNumOperands() == 0 || isa<PHINode>(IncV)) {
+ IncV = 0;
+ break;
+ }
+ // If any of the operands don't dominate the insert position, bail.
+ // Addrec operands are always loop-invariant, so this can only happen
+ // if there are instructions which haven't been hoisted.
+ for (User::op_iterator OI = IncV->op_begin()+1,
+ OE = IncV->op_end(); OI != OE; ++OI)
+ if (Instruction *OInst = dyn_cast<Instruction>(OI))
+ if (!SE.DT->dominates(OInst, IVIncInsertPos)) {
+ IncV = 0;
+ break;
+ }
+ if (!IncV)
+ break;
+ // Advance to the next instruction.
+ IncV = dyn_cast<Instruction>(IncV->getOperand(0));
+ if (!IncV)
+ break;
+ if (IncV->mayHaveSideEffects()) {
+ IncV = 0;
+ break;
+ }
+ } while (IncV != PN);
+
+ if (IncV) {
+ // Ok, the add recurrence looks usable.
+ // Remember this PHI, even in post-inc mode.
+ InsertedValues.insert(PN);
+ // Remember the increment.
+ IncV = cast<Instruction>(PN->getIncomingValueForBlock(LatchBlock));
+ rememberInstruction(IncV);
+ if (L == IVIncInsertLoop)
+ do {
+ if (SE.DT->dominates(IncV, IVIncInsertPos))
+ break;
+ // Make sure the increment is where we want it. But don't move it
+ // down past a potential existing post-inc user.
+ IncV->moveBefore(IVIncInsertPos);
+ IVIncInsertPos = IncV;
+ IncV = cast<Instruction>(IncV->getOperand(0));
+ } while (IncV != PN);
+ return PN;
+ }
+ }
+
+ // Save the original insertion point so we can restore it when we're done.
+ BasicBlock *SaveInsertBB = Builder.GetInsertBlock();
+ BasicBlock::iterator SaveInsertPt = Builder.GetInsertPoint();
+
+ // Expand code for the start value.
+ Value *StartV = expandCodeFor(Normalized->getStart(), ExpandTy,
+ L->getHeader()->begin());
+
+ // Expand code for the step value. Insert instructions right before the
+ // terminator corresponding to the back-edge. Do this before creating the PHI
+ // so that PHI reuse code doesn't see an incomplete PHI. If the stride is
+ // negative, insert a sub instead of an add for the increment (unless it's a
+ // constant, because subtracts of constants are canonicalized to adds).
+ const SCEV *Step = Normalized->getStepRecurrence(SE);
+ bool isPointer = ExpandTy->isPointerTy();
+ bool isNegative = !isPointer && isNonConstantNegative(Step);
+ if (isNegative)
+ Step = SE.getNegativeSCEV(Step);
+ Value *StepV = expandCodeFor(Step, IntTy, L->getHeader()->begin());
+
+ // Create the PHI.
+ Builder.SetInsertPoint(L->getHeader(), L->getHeader()->begin());
+ PHINode *PN = Builder.CreatePHI(ExpandTy, "lsr.iv");
+ rememberInstruction(PN);
+
+ // Create the step instructions and populate the PHI.
+ BasicBlock *Header = L->getHeader();
+ for (pred_iterator HPI = pred_begin(Header), HPE = pred_end(Header);
+ HPI != HPE; ++HPI) {
+ BasicBlock *Pred = *HPI;
+
+ // Add a start value.
+ if (!L->contains(Pred)) {
+ PN->addIncoming(StartV, Pred);
+ continue;
+ }
+
+ // Create a step value and add it to the PHI. If IVIncInsertLoop is
+ // non-null and equal to the addrec's loop, insert the instructions
+ // at IVIncInsertPos.
+ Instruction *InsertPos = L == IVIncInsertLoop ?
+ IVIncInsertPos : Pred->getTerminator();
+ Builder.SetInsertPoint(InsertPos->getParent(), InsertPos);
+ Value *IncV;
+ // If the PHI is a pointer, use a GEP, otherwise use an add or sub.
+ if (isPointer) {
+ const PointerType *GEPPtrTy = cast<PointerType>(ExpandTy);
+ // If the step isn't constant, don't use an implicitly scaled GEP, because
+ // that would require a multiply inside the loop.
+ if (!isa<ConstantInt>(StepV))
+ GEPPtrTy = PointerType::get(Type::getInt1Ty(SE.getContext()),
+ GEPPtrTy->getAddressSpace());
+ const SCEV *const StepArray[1] = { SE.getSCEV(StepV) };
+ IncV = expandAddToGEP(StepArray, StepArray+1, GEPPtrTy, IntTy, PN);
+ if (IncV->getType() != PN->getType()) {
+ IncV = Builder.CreateBitCast(IncV, PN->getType(), "tmp");
+ rememberInstruction(IncV);
+ }
+ } else {
+ IncV = isNegative ?
+ Builder.CreateSub(PN, StepV, "lsr.iv.next") :
+ Builder.CreateAdd(PN, StepV, "lsr.iv.next");
+ rememberInstruction(IncV);
+ }
+ PN->addIncoming(IncV, Pred);
+ }
+
+ // Restore the original insert point.
+ if (SaveInsertBB)
+ restoreInsertPoint(SaveInsertBB, SaveInsertPt);
+
+ // Remember this PHI, even in post-inc mode.
+ InsertedValues.insert(PN);
+
+ return PN;
+}
+
+Value *SCEVExpander::expandAddRecExprLiterally(const SCEVAddRecExpr *S) {
+ const Type *STy = S->getType();
+ const Type *IntTy = SE.getEffectiveSCEVType(STy);
+ const Loop *L = S->getLoop();
+
+ // Determine a normalized form of this expression, which is the expression
+ // before any post-inc adjustment is made.
+ const SCEVAddRecExpr *Normalized = S;
+ if (PostIncLoops.count(L)) {
+ PostIncLoopSet Loops;
+ Loops.insert(L);
+ Normalized =
+ cast<SCEVAddRecExpr>(TransformForPostIncUse(Normalize, S, 0, 0,
+ Loops, SE, *SE.DT));
+ }
+
+ // Strip off any non-loop-dominating component from the addrec start.
+ const SCEV *Start = Normalized->getStart();
+ const SCEV *PostLoopOffset = 0;
+ if (!Start->properlyDominates(L->getHeader(), SE.DT)) {
+ PostLoopOffset = Start;
+ Start = SE.getConstant(Normalized->getType(), 0);
+ Normalized =
+ cast<SCEVAddRecExpr>(SE.getAddRecExpr(Start,
+ Normalized->getStepRecurrence(SE),
+ Normalized->getLoop()));
+ }
+
+ // Strip off any non-loop-dominating component from the addrec step.
+ const SCEV *Step = Normalized->getStepRecurrence(SE);
+ const SCEV *PostLoopScale = 0;
+ if (!Step->dominates(L->getHeader(), SE.DT)) {
+ PostLoopScale = Step;
+ Step = SE.getConstant(Normalized->getType(), 1);
+ Normalized =
+ cast<SCEVAddRecExpr>(SE.getAddRecExpr(Start, Step,
+ Normalized->getLoop()));
+ }
+
+ // Expand the core addrec. If we need post-loop scaling, force it to
+ // expand to an integer type to avoid the need for additional casting.
+ const Type *ExpandTy = PostLoopScale ? IntTy : STy;
+ PHINode *PN = getAddRecExprPHILiterally(Normalized, L, ExpandTy, IntTy);
+
+ // Accommodate post-inc mode, if necessary.
+ Value *Result;
+ if (!PostIncLoops.count(L))
+ Result = PN;
+ else {
+ // In PostInc mode, use the post-incremented value.
+ BasicBlock *LatchBlock = L->getLoopLatch();
+ assert(LatchBlock && "PostInc mode requires a unique loop latch!");
+ Result = PN->getIncomingValueForBlock(LatchBlock);
+ }
+
+ // Re-apply any non-loop-dominating scale.
+ if (PostLoopScale) {
+ Result = InsertNoopCastOfTo(Result, IntTy);
+ Result = Builder.CreateMul(Result,
+ expandCodeFor(PostLoopScale, IntTy));
+ rememberInstruction(Result);
+ }
+
+ // Re-apply any non-loop-dominating offset.
+ if (PostLoopOffset) {
+ if (const PointerType *PTy = dyn_cast<PointerType>(ExpandTy)) {
+ const SCEV *const OffsetArray[1] = { PostLoopOffset };
+ Result = expandAddToGEP(OffsetArray, OffsetArray+1, PTy, IntTy, Result);
+ } else {
+ Result = InsertNoopCastOfTo(Result, IntTy);
+ Result = Builder.CreateAdd(Result,
+ expandCodeFor(PostLoopOffset, IntTy));
+ rememberInstruction(Result);
+ }
+ }
+
+ return Result;
+}
+
Value *SCEVExpander::visitAddRecExpr(const SCEVAddRecExpr *S) {
+ if (!CanonicalMode) return expandAddRecExprLiterally(S);
+
const Type *Ty = SE.getEffectiveSCEVType(S->getType());
const Loop *L = S->getLoop();
+ // First check for an existing canonical IV in a suitable type.
+ PHINode *CanonicalIV = 0;
+ if (PHINode *PN = L->getCanonicalInductionVariable())
+ if (SE.getTypeSizeInBits(PN->getType()) >= SE.getTypeSizeInBits(Ty))
+ CanonicalIV = PN;
+
+ // Rewrite an AddRec in terms of the canonical induction variable, if
+ // its type is more narrow.
+ if (CanonicalIV &&
+ SE.getTypeSizeInBits(CanonicalIV->getType()) >
+ SE.getTypeSizeInBits(Ty)) {
+ SmallVector<const SCEV *, 4> NewOps(S->getNumOperands());
+ for (unsigned i = 0, e = S->getNumOperands(); i != e; ++i)
+ NewOps[i] = SE.getAnyExtendExpr(S->op_begin()[i], CanonicalIV->getType());
+ Value *V = expand(SE.getAddRecExpr(NewOps, S->getLoop()));
+ BasicBlock *SaveInsertBB = Builder.GetInsertBlock();
+ BasicBlock::iterator SaveInsertPt = Builder.GetInsertPoint();
+ BasicBlock::iterator NewInsertPt =
+ llvm::next(BasicBlock::iterator(cast<Instruction>(V)));
+ while (isa<PHINode>(NewInsertPt) || isa<DbgInfoIntrinsic>(NewInsertPt))
+ ++NewInsertPt;
+ V = expandCodeFor(SE.getTruncateExpr(SE.getUnknown(V), Ty), 0,
+ NewInsertPt);
+ restoreInsertPoint(SaveInsertBB, SaveInsertPt);
+ return V;
+ }
+
// {X,+,F} --> X + {0,+,F}
if (!S->getStart()->isZero()) {
- std::vector<SCEVHandle> NewOps(S->getOperands());
- NewOps[0] = SE.getIntegerSCEV(0, Ty);
- SCEVHandle Rest = SE.getAddRecExpr(NewOps, L);
+ SmallVector<const SCEV *, 4> NewOps(S->op_begin(), S->op_end());
+ NewOps[0] = SE.getConstant(Ty, 0);
+ const SCEV *Rest = SE.getAddRecExpr(NewOps, L);
// Turn things like ptrtoint+arithmetic+inttoptr into GEP. See the
// comments on expandAddToGEP for details.
- if (SE.TD) {
- SCEVHandle Base = S->getStart();
- SCEVHandle RestArray[1] = Rest;
- // Dig into the expression to find the pointer base for a GEP.
- ExposePointerBase(Base, RestArray[0], SE);
- // If we found a pointer, expand the AddRec with a GEP.
- if (const PointerType *PTy = dyn_cast<PointerType>(Base->getType())) {
+ const SCEV *Base = S->getStart();
+ const SCEV *RestArray[1] = { Rest };
+ // Dig into the expression to find the pointer base for a GEP.
+ ExposePointerBase(Base, RestArray[0], SE);
+ // If we found a pointer, expand the AddRec with a GEP.
+ if (const PointerType *PTy = dyn_cast<PointerType>(Base->getType())) {
+ // Make sure the Base isn't something exotic, such as a multiplied
+ // or divided pointer value. In those cases, the result type isn't
+ // actually a pointer type.
+ if (!isa<SCEVMulExpr>(Base) && !isa<SCEVUDivExpr>(Base)) {
Value *StartV = expand(Base);
assert(StartV->getType() == PTy && "Pointer type mismatch for GEP!");
return expandAddToGEP(RestArray, RestArray+1, PTy, Ty, StartV);
}
}
- Value *RestV = expand(Rest);
- return expand(SE.getAddExpr(S->getStart(), SE.getUnknown(RestV)));
+ // Just do a normal add. Pre-expand the operands to suppress folding.
+ return expand(SE.getAddExpr(SE.getUnknown(expand(S->getStart())),
+ SE.getUnknown(expand(Rest))));
}
- // {0,+,1} --> Insert a canonical induction variable into the loop!
- if (S->isAffine() &&
- S->getOperand(1) == SE.getIntegerSCEV(1, Ty)) {
+ // If we don't yet have a canonical IV, create one.
+ if (!CanonicalIV) {
// Create and insert the PHI node for the induction variable in the
// specified loop.
BasicBlock *Header = L->getHeader();
- PHINode *PN = PHINode::Create(Ty, "indvar", Header->begin());
- InsertedValues.insert(PN);
- PN->addIncoming(Constant::getNullValue(Ty), L->getLoopPreheader());
-
- pred_iterator HPI = pred_begin(Header);
- assert(HPI != pred_end(Header) && "Loop with zero preds???");
- if (!L->contains(*HPI)) ++HPI;
- assert(HPI != pred_end(Header) && L->contains(*HPI) &&
- "No backedge in loop?");
-
- // Insert a unit add instruction right before the terminator corresponding
- // to the back-edge.
+ CanonicalIV = PHINode::Create(Ty, "indvar", Header->begin());
+ rememberInstruction(CanonicalIV);
+
Constant *One = ConstantInt::get(Ty, 1);
- Instruction *Add = BinaryOperator::CreateAdd(PN, One, "indvar.next",
- (*HPI)->getTerminator());
- InsertedValues.insert(Add);
+ for (pred_iterator HPI = pred_begin(Header), HPE = pred_end(Header);
+ HPI != HPE; ++HPI) {
+ BasicBlock *HP = *HPI;
+ if (L->contains(HP)) {
+ // Insert a unit add instruction right before the terminator
+ // corresponding to the back-edge.
+ Instruction *Add = BinaryOperator::CreateAdd(CanonicalIV, One,
+ "indvar.next",
+ HP->getTerminator());
+ rememberInstruction(Add);
+ CanonicalIV->addIncoming(Add, HP);
+ } else {
+ CanonicalIV->addIncoming(Constant::getNullValue(Ty), HP);
+ }
+ }
+ }
- pred_iterator PI = pred_begin(Header);
- if (*PI == L->getLoopPreheader())
- ++PI;
- PN->addIncoming(Add, *PI);
- return PN;
+ // {0,+,1} --> Insert a canonical induction variable into the loop!
+ if (S->isAffine() && S->getOperand(1)->isOne()) {
+ assert(Ty == SE.getEffectiveSCEVType(CanonicalIV->getType()) &&
+ "IVs with types different from the canonical IV should "
+ "already have been handled!");
+ return CanonicalIV;
}
- // Get the canonical induction variable I for this loop.
- Value *I = getOrInsertCanonicalInductionVariable(L, Ty);
+ // {0,+,F} --> {0,+,1} * F
// If this is a simple linear addrec, emit it now as a special case.
- if (S->isAffine()) { // {0,+,F} --> i*F
- Value *F = expand(S->getOperand(1));
- F = InsertNoopCastOfTo(F, Ty);
-
- // IF the step is by one, just return the inserted IV.
- if (ConstantInt *CI = dyn_cast<ConstantInt>(F))
- if (CI->getValue() == 1)
- return I;
-
- // If the insert point is directly inside of the loop, emit the multiply at
- // the insert point. Otherwise, L is a loop that is a parent of the insert
- // point loop. If we can, move the multiply to the outer most loop that it
- // is safe to be in.
- BasicBlock::iterator MulInsertPt = getInsertionPoint();
- Loop *InsertPtLoop = SE.LI->getLoopFor(MulInsertPt->getParent());
- if (InsertPtLoop != L && InsertPtLoop &&
- L->contains(InsertPtLoop->getHeader())) {
- do {
- // If we cannot hoist the multiply out of this loop, don't.
- if (!InsertPtLoop->isLoopInvariant(F)) break;
-
- BasicBlock *InsertPtLoopPH = InsertPtLoop->getLoopPreheader();
-
- // If this loop hasn't got a preheader, we aren't able to hoist the
- // multiply.
- if (!InsertPtLoopPH)
- break;
-
- // Otherwise, move the insert point to the preheader.
- MulInsertPt = InsertPtLoopPH->getTerminator();
- InsertPtLoop = InsertPtLoop->getParentLoop();
- } while (InsertPtLoop != L);
- }
-
- return InsertBinop(Instruction::Mul, I, F, MulInsertPt);
- }
+ if (S->isAffine()) // {0,+,F} --> i*F
+ return
+ expand(SE.getTruncateOrNoop(
+ SE.getMulExpr(SE.getUnknown(CanonicalIV),
+ SE.getNoopOrAnyExtend(S->getOperand(1),
+ CanonicalIV->getType())),
+ Ty));
// If this is a chain of recurrences, turn it into a closed form, using the
// folders, then expandCodeFor the closed form. This allows the folders to
// simplify the expression without having to build a bunch of special code
// into this folder.
- SCEVHandle IH = SE.getUnknown(I); // Get I as a "symbolic" SCEV.
+ const SCEV *IH = SE.getUnknown(CanonicalIV); // Get I as a "symbolic" SCEV.
+
+ // Promote S up to the canonical IV type, if the cast is foldable.
+ const SCEV *NewS = S;
+ const SCEV *Ext = SE.getNoopOrAnyExtend(S, CanonicalIV->getType());
+ if (isa<SCEVAddRecExpr>(Ext))
+ NewS = Ext;
- SCEVHandle V = S->evaluateAtIteration(IH, SE);
+ const SCEV *V = cast<SCEVAddRecExpr>(NewS)->evaluateAtIteration(IH, SE);
//cerr << "Evaluated: " << *this << "\n to: " << *V << "\n";
- return expand(V);
+ // Truncate the result down to the original type, if needed.
+ const SCEV *T = SE.getTruncateOrNoop(V, Ty);
+ return expand(T);
}
Value *SCEVExpander::visitTruncateExpr(const SCEVTruncateExpr *S) {
const Type *Ty = SE.getEffectiveSCEVType(S->getType());
- Value *V = expand(S->getOperand());
- V = InsertNoopCastOfTo(V, SE.getEffectiveSCEVType(V->getType()));
- Instruction *I = new TruncInst(V, Ty, "tmp.", InsertPt);
- InsertedValues.insert(I);
+ Value *V = expandCodeFor(S->getOperand(),
+ SE.getEffectiveSCEVType(S->getOperand()->getType()));
+ Value *I = Builder.CreateTrunc(V, Ty, "tmp");
+ rememberInstruction(I);
return I;
}
Value *SCEVExpander::visitZeroExtendExpr(const SCEVZeroExtendExpr *S) {
const Type *Ty = SE.getEffectiveSCEVType(S->getType());
- Value *V = expand(S->getOperand());
- V = InsertNoopCastOfTo(V, SE.getEffectiveSCEVType(V->getType()));
- Instruction *I = new ZExtInst(V, Ty, "tmp.", InsertPt);
- InsertedValues.insert(I);
+ Value *V = expandCodeFor(S->getOperand(),
+ SE.getEffectiveSCEVType(S->getOperand()->getType()));
+ Value *I = Builder.CreateZExt(V, Ty, "tmp");
+ rememberInstruction(I);
return I;
}
Value *SCEVExpander::visitSignExtendExpr(const SCEVSignExtendExpr *S) {
const Type *Ty = SE.getEffectiveSCEVType(S->getType());
- Value *V = expand(S->getOperand());
- V = InsertNoopCastOfTo(V, SE.getEffectiveSCEVType(V->getType()));
- Instruction *I = new SExtInst(V, Ty, "tmp.", InsertPt);
- InsertedValues.insert(I);
+ Value *V = expandCodeFor(S->getOperand(),
+ SE.getEffectiveSCEVType(S->getOperand()->getType()));
+ Value *I = Builder.CreateSExt(V, Ty, "tmp");
+ rememberInstruction(I);
return I;
}
Value *SCEVExpander::visitSMaxExpr(const SCEVSMaxExpr *S) {
- const Type *Ty = SE.getEffectiveSCEVType(S->getType());
- Value *LHS = expand(S->getOperand(0));
- LHS = InsertNoopCastOfTo(LHS, Ty);
- for (unsigned i = 1; i < S->getNumOperands(); ++i) {
- Value *RHS = expand(S->getOperand(i));
- RHS = InsertNoopCastOfTo(RHS, Ty);
- Instruction *ICmp =
- new ICmpInst(ICmpInst::ICMP_SGT, LHS, RHS, "tmp", InsertPt);
- InsertedValues.insert(ICmp);
- Instruction *Sel = SelectInst::Create(ICmp, LHS, RHS, "smax", InsertPt);
- InsertedValues.insert(Sel);
+ Value *LHS = expand(S->getOperand(S->getNumOperands()-1));
+ const Type *Ty = LHS->getType();
+ for (int i = S->getNumOperands()-2; i >= 0; --i) {
+ // In the case of mixed integer and pointer types, do the
+ // rest of the comparisons as integer.
+ if (S->getOperand(i)->getType() != Ty) {
+ Ty = SE.getEffectiveSCEVType(Ty);
+ LHS = InsertNoopCastOfTo(LHS, Ty);
+ }
+ Value *RHS = expandCodeFor(S->getOperand(i), Ty);
+ Value *ICmp = Builder.CreateICmpSGT(LHS, RHS, "tmp");
+ rememberInstruction(ICmp);
+ Value *Sel = Builder.CreateSelect(ICmp, LHS, RHS, "smax");
+ rememberInstruction(Sel);
LHS = Sel;
}
+ // In the case of mixed integer and pointer types, cast the
+ // final result back to the pointer type.
+ if (LHS->getType() != S->getType())
+ LHS = InsertNoopCastOfTo(LHS, S->getType());
return LHS;
}
Value *SCEVExpander::visitUMaxExpr(const SCEVUMaxExpr *S) {
- const Type *Ty = SE.getEffectiveSCEVType(S->getType());
- Value *LHS = expand(S->getOperand(0));
- LHS = InsertNoopCastOfTo(LHS, Ty);
- for (unsigned i = 1; i < S->getNumOperands(); ++i) {
- Value *RHS = expand(S->getOperand(i));
- RHS = InsertNoopCastOfTo(RHS, Ty);
- Instruction *ICmp =
- new ICmpInst(ICmpInst::ICMP_UGT, LHS, RHS, "tmp", InsertPt);
- InsertedValues.insert(ICmp);
- Instruction *Sel = SelectInst::Create(ICmp, LHS, RHS, "umax", InsertPt);
- InsertedValues.insert(Sel);
+ Value *LHS = expand(S->getOperand(S->getNumOperands()-1));
+ const Type *Ty = LHS->getType();
+ for (int i = S->getNumOperands()-2; i >= 0; --i) {
+ // In the case of mixed integer and pointer types, do the
+ // rest of the comparisons as integer.
+ if (S->getOperand(i)->getType() != Ty) {
+ Ty = SE.getEffectiveSCEVType(Ty);
+ LHS = InsertNoopCastOfTo(LHS, Ty);
+ }
+ Value *RHS = expandCodeFor(S->getOperand(i), Ty);
+ Value *ICmp = Builder.CreateICmpUGT(LHS, RHS, "tmp");
+ rememberInstruction(ICmp);
+ Value *Sel = Builder.CreateSelect(ICmp, LHS, RHS, "umax");
+ rememberInstruction(Sel);
LHS = Sel;
}
+ // In the case of mixed integer and pointer types, cast the
+ // final result back to the pointer type.
+ if (LHS->getType() != S->getType())
+ LHS = InsertNoopCastOfTo(LHS, S->getType());
return LHS;
}
-Value *SCEVExpander::expandCodeFor(SCEVHandle SH, const Type *Ty) {
+Value *SCEVExpander::expandCodeFor(const SCEV *SH, const Type *Ty,
+ Instruction *I) {
+ BasicBlock::iterator IP = I;
+ while (isInsertedInstruction(IP) || isa<DbgInfoIntrinsic>(IP))
+ ++IP;
+ Builder.SetInsertPoint(IP->getParent(), IP);
+ return expandCodeFor(SH, Ty);
+}
+
+Value *SCEVExpander::expandCodeFor(const SCEV *SH, const Type *Ty) {
// Expand the code for this SCEV.
Value *V = expand(SH);
if (Ty) {
}
Value *SCEVExpander::expand(const SCEV *S) {
- // Check to see if we already expanded this.
- std::map<SCEVHandle, AssertingVH<Value> >::iterator I =
- InsertedExpressions.find(S);
+ // Compute an insertion point for this SCEV object. Hoist the instructions
+ // as far out in the loop nest as possible.
+ Instruction *InsertPt = Builder.GetInsertPoint();
+ for (Loop *L = SE.LI->getLoopFor(Builder.GetInsertBlock()); ;
+ L = L->getParentLoop())
+ if (S->isLoopInvariant(L)) {
+ if (!L) break;
+ if (BasicBlock *Preheader = L->getLoopPreheader())
+ InsertPt = Preheader->getTerminator();
+ } else {
+ // If the SCEV is computable at this level, insert it into the header
+ // after the PHIs (and after any other instructions that we've inserted
+ // there) so that it is guaranteed to dominate any user inside the loop.
+ if (L && S->hasComputableLoopEvolution(L) && !PostIncLoops.count(L))
+ InsertPt = L->getHeader()->getFirstNonPHI();
+ while (isInsertedInstruction(InsertPt) || isa<DbgInfoIntrinsic>(InsertPt))
+ InsertPt = llvm::next(BasicBlock::iterator(InsertPt));
+ break;
+ }
+
+ // Check to see if we already expanded this here.
+ std::map<std::pair<const SCEV *, Instruction *>,
+ AssertingVH<Value> >::iterator I =
+ InsertedExpressions.find(std::make_pair(S, InsertPt));
if (I != InsertedExpressions.end())
return I->second;
-
+
+ BasicBlock *SaveInsertBB = Builder.GetInsertBlock();
+ BasicBlock::iterator SaveInsertPt = Builder.GetInsertPoint();
+ Builder.SetInsertPoint(InsertPt->getParent(), InsertPt);
+
+ // Expand the expression into instructions.
Value *V = visit(S);
- InsertedExpressions[S] = V;
+
+ // Remember the expanded value for this SCEV at this location.
+ if (PostIncLoops.empty())
+ InsertedExpressions[std::make_pair(S, InsertPt)] = V;
+
+ restoreInsertPoint(SaveInsertBB, SaveInsertPt);
+ return V;
+}
+
+void SCEVExpander::rememberInstruction(Value *I) {
+ if (!PostIncLoops.empty())
+ InsertedPostIncValues.insert(I);
+ else
+ InsertedValues.insert(I);
+
+ // If we just claimed an existing instruction and that instruction had
+ // been the insert point, adjust the insert point forward so that
+ // subsequently inserted code will be dominated.
+ if (Builder.GetInsertPoint() == I) {
+ BasicBlock::iterator It = cast<Instruction>(I);
+ do { ++It; } while (isInsertedInstruction(It) ||
+ isa<DbgInfoIntrinsic>(It));
+ Builder.SetInsertPoint(Builder.GetInsertBlock(), It);
+ }
+}
+
+void SCEVExpander::restoreInsertPoint(BasicBlock *BB, BasicBlock::iterator I) {
+ // If we acquired more instructions since the old insert point was saved,
+ // advance past them.
+ while (isInsertedInstruction(I) || isa<DbgInfoIntrinsic>(I)) ++I;
+
+ Builder.SetInsertPoint(BB, I);
+}
+
+/// getOrInsertCanonicalInductionVariable - This method returns the
+/// canonical induction variable of the specified type for the specified
+/// loop (inserting one if there is none). A canonical induction variable
+/// starts at zero and steps by one on each iteration.
+PHINode *
+SCEVExpander::getOrInsertCanonicalInductionVariable(const Loop *L,
+ const Type *Ty) {
+ assert(Ty->isIntegerTy() && "Can only insert integer induction variables!");
+
+ // Build a SCEV for {0,+,1}<L>.
+ const SCEV *H = SE.getAddRecExpr(SE.getConstant(Ty, 0),
+ SE.getConstant(Ty, 1), L);
+
+ // Emit code for it.
+ BasicBlock *SaveInsertBB = Builder.GetInsertBlock();
+ BasicBlock::iterator SaveInsertPt = Builder.GetInsertPoint();
+ PHINode *V = cast<PHINode>(expandCodeFor(H, 0, L->getHeader()->begin()));
+ if (SaveInsertBB)
+ restoreInsertPoint(SaveInsertBB, SaveInsertPt);
+
return V;
}