//===----------------------------------------------------------------------===//
#include "llvm/Analysis/ScalarEvolutionExpander.h"
+#include "llvm/ADT/STLExtras.h"
+#include "llvm/ADT/SmallSet.h"
#include "llvm/Analysis/LoopInfo.h"
-#include "llvm/IntrinsicInst.h"
-#include "llvm/LLVMContext.h"
+#include "llvm/Analysis/TargetTransformInfo.h"
+#include "llvm/IR/DataLayout.h"
+#include "llvm/IR/Dominators.h"
+#include "llvm/IR/IntrinsicInst.h"
+#include "llvm/IR/LLVMContext.h"
#include "llvm/Support/Debug.h"
-#include "llvm/Target/TargetData.h"
-#include "llvm/Target/TargetLowering.h"
-#include "llvm/ADT/STLExtras.h"
using namespace llvm;
// We use this precondition to produce a cast that will dominate all its
// uses. In particular, this is crucial for the case where the builder's
// insertion point *is* the point where we were asked to put the cast.
- // Since we don't know the the builder's insertion point is actually
+ // Since we don't know the builder's insertion point is actually
// where the uses will be added (only that it dominates it), we are
// not allowed to move it.
BasicBlock::iterator BIP = Builder.GetInsertPoint();
- Instruction *Ret = NULL;
+ Instruction *Ret = nullptr;
// Check to see if there is already a cast!
- for (Value::use_iterator UI = V->use_begin(), E = V->use_end();
- UI != E; ++UI) {
- User *U = *UI;
+ for (User *U : V->users())
if (U->getType() == Ty)
if (CastInst *CI = dyn_cast<CastInst>(U))
if (CI->getOpcode() == Op) {
Ret = CI;
break;
}
- }
// Create a new cast.
if (!Ret)
}
// Save the original insertion point so we can restore it when we're done.
- BasicBlock *SaveInsertBB = Builder.GetInsertBlock();
- BasicBlock::iterator SaveInsertPt = Builder.GetInsertPoint();
+ DebugLoc Loc = Builder.GetInsertPoint()->getDebugLoc();
+ BuilderType::InsertPointGuard Guard(Builder);
// Move the insertion point out of as many loops as we can.
while (const Loop *L = SE.LI->getLoopFor(Builder.GetInsertBlock())) {
// If we haven't found this binop, insert it.
Instruction *BO = cast<Instruction>(Builder.CreateBinOp(Opcode, LHS, RHS));
- BO->setDebugLoc(SaveInsertPt->getDebugLoc());
+ BO->setDebugLoc(Loc);
rememberInstruction(BO);
- // Restore the original insert point.
- if (SaveInsertBB)
- restoreInsertPoint(SaveInsertBB, SaveInsertPt);
-
return BO;
}
const SCEV *&Remainder,
const SCEV *Factor,
ScalarEvolution &SE,
- const TargetData *TD) {
+ const DataLayout *DL) {
// Everything is divisible by one.
if (Factor->isOne())
return true;
// In a Mul, check if there is a constant operand which is a multiple
// of the given factor.
if (const SCEVMulExpr *M = dyn_cast<SCEVMulExpr>(S)) {
- if (TD) {
- // With TargetData, the size is known. Check if there is a constant
+ if (DL) {
+ // With DataLayout, the size is known. Check if there is a constant
// operand which is a multiple of the given factor. If so, we can
// factor it.
const SCEVConstant *FC = cast<SCEVConstant>(Factor);
return true;
}
} else {
- // Without TargetData, check if Factor can be factored out of any of the
+ // Without DataLayout, check if Factor can be factored out of any of the
// Mul's operands. If so, we can just remove it.
for (unsigned i = 0, e = M->getNumOperands(); i != e; ++i) {
const SCEV *SOp = M->getOperand(i);
const SCEV *Remainder = SE.getConstant(SOp->getType(), 0);
- if (FactorOutConstant(SOp, Remainder, Factor, SE, TD) &&
+ if (FactorOutConstant(SOp, Remainder, Factor, SE, DL) &&
Remainder->isZero()) {
SmallVector<const SCEV *, 4> NewMulOps(M->op_begin(), M->op_end());
NewMulOps[i] = SOp;
if (const SCEVAddRecExpr *A = dyn_cast<SCEVAddRecExpr>(S)) {
const SCEV *Step = A->getStepRecurrence(SE);
const SCEV *StepRem = SE.getConstant(Step->getType(), 0);
- if (!FactorOutConstant(Step, StepRem, Factor, SE, TD))
+ if (!FactorOutConstant(Step, StepRem, Factor, SE, DL))
return false;
if (!StepRem->isZero())
return false;
const SCEV *Start = A->getStart();
- if (!FactorOutConstant(Start, Remainder, Factor, SE, TD))
+ if (!FactorOutConstant(Start, Remainder, Factor, SE, DL))
return false;
- // FIXME: can use A->getNoWrapFlags(FlagNW)
- S = SE.getAddRecExpr(Start, Step, A->getLoop(), SCEV::FlagAnyWrap);
+ S = SE.getAddRecExpr(Start, Step, A->getLoop(),
+ A->getNoWrapFlags(SCEV::FlagNW));
return true;
}
AddRecs.push_back(SE.getAddRecExpr(Zero,
A->getStepRecurrence(SE),
A->getLoop(),
- // FIXME: A->getNoWrapFlags(FlagNW)
- SCEV::FlagAnyWrap));
+ A->getNoWrapFlags(SCEV::FlagNW)));
if (const SCEVAddExpr *Add = dyn_cast<SCEVAddExpr>(Start)) {
Ops[i] = Zero;
Ops.append(Add->op_begin(), Add->op_end());
// without the other.
SplitAddRecs(Ops, Ty, SE);
+ Type *IntPtrTy = SE.DL
+ ? SE.DL->getIntPtrType(PTy)
+ : Type::getInt64Ty(PTy->getContext());
+
// Descend down the pointer's type and attempt to convert the other
// operands into GEP indices, at each level. The first index in a GEP
// indexes into the array implied by the pointer operand; the rest of
// array indexing.
SmallVector<const SCEV *, 8> ScaledOps;
if (ElTy->isSized()) {
- const SCEV *ElSize = SE.getSizeOfExpr(ElTy);
+ const SCEV *ElSize = SE.getSizeOfExpr(IntPtrTy, ElTy);
if (!ElSize->isZero()) {
SmallVector<const SCEV *, 8> NewOps;
for (unsigned i = 0, e = Ops.size(); i != e; ++i) {
const SCEV *Op = Ops[i];
const SCEV *Remainder = SE.getConstant(Ty, 0);
- if (FactorOutConstant(Op, Remainder, ElSize, SE, SE.TD)) {
+ if (FactorOutConstant(Op, Remainder, ElSize, SE, SE.DL)) {
// Op now has ElSize factored out.
ScaledOps.push_back(Op);
if (!Remainder->isZero())
bool FoundFieldNo = false;
// An empty struct has no fields.
if (STy->getNumElements() == 0) break;
- if (SE.TD) {
- // With TargetData, field offsets are known. See if a constant offset
+ if (SE.DL) {
+ // With DataLayout, field offsets are known. See if a constant offset
// falls within any of the struct fields.
if (Ops.empty()) break;
if (const SCEVConstant *C = dyn_cast<SCEVConstant>(Ops[0]))
if (SE.getTypeSizeInBits(C->getType()) <= 64) {
- const StructLayout &SL = *SE.TD->getStructLayout(STy);
+ const StructLayout &SL = *SE.DL->getStructLayout(STy);
uint64_t FullOffset = C->getValue()->getZExtValue();
if (FullOffset < SL.getSizeInBytes()) {
unsigned ElIdx = SL.getElementContainingOffset(FullOffset);
}
}
} else {
- // Without TargetData, just check for an offsetof expression of the
+ // Without DataLayout, just check for an offsetof expression of the
// appropriate struct type.
for (unsigned i = 0, e = Ops.size(); i != e; ++i)
if (const SCEVUnknown *U = dyn_cast<SCEVUnknown>(Ops[i])) {
}
// Save the original insertion point so we can restore it when we're done.
- BasicBlock *SaveInsertBB = Builder.GetInsertBlock();
- BasicBlock::iterator SaveInsertPt = Builder.GetInsertPoint();
+ BuilderType::InsertPointGuard Guard(Builder);
// Move the insertion point out of as many loops as we can.
while (const Loop *L = SE.LI->getLoopFor(Builder.GetInsertBlock())) {
Value *GEP = Builder.CreateGEP(V, Idx, "uglygep");
rememberInstruction(GEP);
- // Restore the original insert point.
- if (SaveInsertBB)
- restoreInsertPoint(SaveInsertBB, SaveInsertPt);
-
return GEP;
}
// Save the original insertion point so we can restore it when we're done.
- BasicBlock *SaveInsertBB = Builder.GetInsertBlock();
- BasicBlock::iterator SaveInsertPt = Builder.GetInsertPoint();
+ BuilderType::InsertPoint SaveInsertPt = Builder.saveIP();
// Move the insertion point out of as many loops as we can.
while (const Loop *L = SE.LI->getLoopFor(Builder.GetInsertBlock())) {
rememberInstruction(GEP);
// Restore the original insert point.
- if (SaveInsertBB)
- restoreInsertPoint(SaveInsertBB, SaveInsertPt);
+ Builder.restoreIP(SaveInsertPt);
return expand(SE.getAddExpr(Ops));
}
const Loop *SCEVExpander::getRelevantLoop(const SCEV *S) {
// Test whether we've already computed the most relevant loop for this SCEV.
std::pair<DenseMap<const SCEV *, const Loop *>::iterator, bool> Pair =
- RelevantLoops.insert(std::make_pair(S, static_cast<const Loop *>(0)));
+ RelevantLoops.insert(std::make_pair(S, nullptr));
if (!Pair.second)
return Pair.first->second;
if (isa<SCEVConstant>(S))
// A constant has no relevant loops.
- return 0;
+ return nullptr;
if (const SCEVUnknown *U = dyn_cast<SCEVUnknown>(S)) {
if (const Instruction *I = dyn_cast<Instruction>(U->getValue()))
return Pair.first->second = SE.LI->getLoopFor(I->getParent());
// A non-instruction has no relevant loops.
- return 0;
+ return nullptr;
}
if (const SCEVNAryExpr *N = dyn_cast<SCEVNAryExpr>(S)) {
- const Loop *L = 0;
+ const Loop *L = nullptr;
if (const SCEVAddRecExpr *AR = dyn_cast<SCEVAddRecExpr>(S))
L = AR->getLoop();
for (SCEVNAryExpr::op_iterator I = N->op_begin(), E = N->op_end();
// Emit instructions to add all the operands. Hoist as much as possible
// out of loops, and form meaningful getelementptrs where possible.
- Value *Sum = 0;
+ Value *Sum = nullptr;
for (SmallVectorImpl<std::pair<const Loop *, const SCEV *> >::iterator
I = OpsAndLoops.begin(), E = OpsAndLoops.end(); I != E; ) {
const Loop *CurLoop = I->first;
// Emit instructions to mul all the operands. Hoist as much as possible
// out of loops.
- Value *Prod = 0;
+ Value *Prod = nullptr;
for (SmallVectorImpl<std::pair<const Loop *, const SCEV *> >::iterator
I = OpsAndLoops.begin(), E = OpsAndLoops.end(); I != E; ) {
const SCEV *Op = I->second;
SE.getAddRecExpr(SE.getConstant(A->getType(), 0),
A->getStepRecurrence(SE),
A->getLoop(),
- // FIXME: A->getNoWrapFlags(FlagNW)
- SCEV::FlagAnyWrap));
+ A->getNoWrapFlags(SCEV::FlagNW)));
}
if (const SCEVAddExpr *A = dyn_cast<SCEVAddExpr>(Base)) {
Base = A->getOperand(A->getNumOperands()-1);
Instruction *InsertPos,
bool allowScale) {
if (IncV == InsertPos)
- return NULL;
+ return nullptr;
switch (IncV->getOpcode()) {
default:
- return NULL;
+ return nullptr;
// Check for a simple Add/Sub or GEP of a loop invariant step.
case Instruction::Add:
case Instruction::Sub: {
Instruction *OInst = dyn_cast<Instruction>(IncV->getOperand(1));
if (!OInst || SE.DT->dominates(OInst, InsertPos))
return dyn_cast<Instruction>(IncV->getOperand(0));
- return NULL;
+ return nullptr;
}
case Instruction::BitCast:
return dyn_cast<Instruction>(IncV->getOperand(0));
continue;
if (Instruction *OInst = dyn_cast<Instruction>(*I)) {
if (!SE.DT->dominates(OInst, InsertPos))
- return NULL;
+ return nullptr;
}
if (allowScale) {
// allow any kind of GEP as long as it can be hoisted.
// have 2 operands. i1* is used by the expander to represent an
// address-size element.
if (IncV->getNumOperands() != 2)
- return NULL;
+ return nullptr;
unsigned AS = cast<PointerType>(IncV->getType())->getAddressSpace();
if (IncV->getType() != Type::getInt1PtrTy(SE.getContext(), AS)
&& IncV->getType() != Type::getInt8PtrTy(SE.getContext(), AS))
- return NULL;
+ return nullptr;
break;
}
return dyn_cast<Instruction>(IncV->getOperand(0));
// InsertPos must itself dominate IncV so that IncV's new position satisfies
// its existing users.
- if (!SE.DT->dominates(InsertPos->getParent(), IncV->getParent()))
+ if (isa<PHINode>(InsertPos)
+ || !SE.DT->dominates(InsertPos->getParent(), IncV->getParent()))
return false;
// Check that the chain of IV operands leading back to Phi can be hoisted.
return IncV;
}
+/// \brief Hoist the addrec instruction chain rooted in the loop phi above the
+/// position. This routine assumes that this is possible (has been checked).
+static void hoistBeforePos(DominatorTree *DT, Instruction *InstToHoist,
+ Instruction *Pos, PHINode *LoopPhi) {
+ do {
+ if (DT->dominates(InstToHoist, Pos))
+ break;
+ // Make sure the increment is where we want it. But don't move it
+ // down past a potential existing post-inc user.
+ InstToHoist->moveBefore(Pos);
+ Pos = InstToHoist;
+ InstToHoist = cast<Instruction>(InstToHoist->getOperand(0));
+ } while (InstToHoist != LoopPhi);
+}
+
+/// \brief Check whether we can cheaply express the requested SCEV in terms of
+/// the available PHI SCEV by truncation and/or invertion of the step.
+static bool canBeCheaplyTransformed(ScalarEvolution &SE,
+ const SCEVAddRecExpr *Phi,
+ const SCEVAddRecExpr *Requested,
+ bool &InvertStep) {
+ Type *PhiTy = SE.getEffectiveSCEVType(Phi->getType());
+ Type *RequestedTy = SE.getEffectiveSCEVType(Requested->getType());
+
+ if (RequestedTy->getIntegerBitWidth() > PhiTy->getIntegerBitWidth())
+ return false;
+
+ // Try truncate it if necessary.
+ Phi = dyn_cast<SCEVAddRecExpr>(SE.getTruncateOrNoop(Phi, RequestedTy));
+ if (!Phi)
+ return false;
+
+ // Check whether truncation will help.
+ if (Phi == Requested) {
+ InvertStep = false;
+ return true;
+ }
+
+ // Check whether inverting will help: {R,+,-1} == R - {0,+,1}.
+ if (SE.getAddExpr(Requested->getStart(),
+ SE.getNegativeSCEV(Requested)) == Phi) {
+ InvertStep = true;
+ return true;
+ }
+
+ return false;
+}
+
/// getAddRecExprPHILiterally - Helper for expandAddRecExprLiterally. Expand
/// the base addrec, which is the addrec without any non-loop-dominating
/// values, and return the PHI.
SCEVExpander::getAddRecExprPHILiterally(const SCEVAddRecExpr *Normalized,
const Loop *L,
Type *ExpandTy,
- Type *IntTy) {
+ Type *IntTy,
+ Type *&TruncTy,
+ bool &InvertStep) {
assert((!IVIncInsertLoop||IVIncInsertPos) && "Uninitialized insert position");
// Reuse a previously-inserted PHI, if present.
BasicBlock *LatchBlock = L->getLoopLatch();
if (LatchBlock) {
+ PHINode *AddRecPhiMatch = nullptr;
+ Instruction *IncV = nullptr;
+ TruncTy = nullptr;
+ InvertStep = false;
+
+ // Only try partially matching scevs that need truncation and/or
+ // step-inversion if we know this loop is outside the current loop.
+ bool TryNonMatchingSCEV = IVIncInsertLoop &&
+ SE.DT->properlyDominates(LatchBlock, IVIncInsertLoop->getHeader());
+
for (BasicBlock::iterator I = L->getHeader()->begin();
PHINode *PN = dyn_cast<PHINode>(I); ++I) {
- if (!SE.isSCEVable(PN->getType()) ||
- (SE.getEffectiveSCEVType(PN->getType()) !=
- SE.getEffectiveSCEVType(Normalized->getType())) ||
- SE.getSCEV(PN) != Normalized)
+ if (!SE.isSCEVable(PN->getType()))
continue;
- Instruction *IncV =
- cast<Instruction>(PN->getIncomingValueForBlock(LatchBlock));
+ const SCEVAddRecExpr *PhiSCEV = dyn_cast<SCEVAddRecExpr>(SE.getSCEV(PN));
+ if (!PhiSCEV)
+ continue;
+
+ bool IsMatchingSCEV = PhiSCEV == Normalized;
+ // We only handle truncation and inversion of phi recurrences for the
+ // expanded expression if the expanded expression's loop dominates the
+ // loop we insert to. Check now, so we can bail out early.
+ if (!IsMatchingSCEV && !TryNonMatchingSCEV)
+ continue;
+ Instruction *TempIncV =
+ cast<Instruction>(PN->getIncomingValueForBlock(LatchBlock));
+
+ // Check whether we can reuse this PHI node.
if (LSRMode) {
- if (!isExpandedAddRecExprPHI(PN, IncV, L))
+ if (!isExpandedAddRecExprPHI(PN, TempIncV, L))
continue;
- if (L == IVIncInsertLoop && !hoistIVInc(IncV, IVIncInsertPos))
+ if (L == IVIncInsertLoop && !hoistIVInc(TempIncV, IVIncInsertPos))
continue;
- }
- else {
- if (!isNormalAddRecExprPHI(PN, IncV, L))
+ } else {
+ if (!isNormalAddRecExprPHI(PN, TempIncV, L))
continue;
- if (L == IVIncInsertLoop)
- do {
- if (SE.DT->dominates(IncV, IVIncInsertPos))
- break;
- // Make sure the increment is where we want it. But don't move it
- // down past a potential existing post-inc user.
- IncV->moveBefore(IVIncInsertPos);
- IVIncInsertPos = IncV;
- IncV = cast<Instruction>(IncV->getOperand(0));
- } while (IncV != PN);
}
+
+ // Stop if we have found an exact match SCEV.
+ if (IsMatchingSCEV) {
+ IncV = TempIncV;
+ TruncTy = nullptr;
+ InvertStep = false;
+ AddRecPhiMatch = PN;
+ break;
+ }
+
+ // Try whether the phi can be translated into the requested form
+ // (truncated and/or offset by a constant).
+ if ((!TruncTy || InvertStep) &&
+ canBeCheaplyTransformed(SE, PhiSCEV, Normalized, InvertStep)) {
+ // Record the phi node. But don't stop we might find an exact match
+ // later.
+ AddRecPhiMatch = PN;
+ IncV = TempIncV;
+ TruncTy = SE.getEffectiveSCEVType(Normalized->getType());
+ }
+ }
+
+ if (AddRecPhiMatch) {
+ // Potentially, move the increment. We have made sure in
+ // isExpandedAddRecExprPHI or hoistIVInc that this is possible.
+ if (L == IVIncInsertLoop)
+ hoistBeforePos(SE.DT, IncV, IVIncInsertPos, AddRecPhiMatch);
+
// Ok, the add recurrence looks usable.
// Remember this PHI, even in post-inc mode.
- InsertedValues.insert(PN);
+ InsertedValues.insert(AddRecPhiMatch);
// Remember the increment.
rememberInstruction(IncV);
- return PN;
+ return AddRecPhiMatch;
}
}
// Save the original insertion point so we can restore it when we're done.
- BasicBlock *SaveInsertBB = Builder.GetInsertBlock();
- BasicBlock::iterator SaveInsertPt = Builder.GetInsertPoint();
+ BuilderType::InsertPointGuard Guard(Builder);
// Another AddRec may need to be recursively expanded below. For example, if
// this AddRec is quadratic, the StepV may itself be an AddRec in this
IVIncInsertPos : Pred->getTerminator();
Builder.SetInsertPoint(InsertPos);
Value *IncV = expandIVInc(PN, StepV, L, ExpandTy, IntTy, useSubtract);
-
+ if (isa<OverflowingBinaryOperator>(IncV)) {
+ if (Normalized->getNoWrapFlags(SCEV::FlagNUW))
+ cast<BinaryOperator>(IncV)->setHasNoUnsignedWrap();
+ if (Normalized->getNoWrapFlags(SCEV::FlagNSW))
+ cast<BinaryOperator>(IncV)->setHasNoSignedWrap();
+ }
PN->addIncoming(IncV, Pred);
}
- // Restore the original insert point.
- if (SaveInsertBB)
- restoreInsertPoint(SaveInsertBB, SaveInsertPt);
-
// After expanding subexpressions, restore the PostIncLoops set so the caller
// can ensure that IVIncrement dominates the current uses.
PostIncLoops = SavedPostIncLoops;
PostIncLoopSet Loops;
Loops.insert(L);
Normalized =
- cast<SCEVAddRecExpr>(TransformForPostIncUse(Normalize, S, 0, 0,
- Loops, SE, *SE.DT));
+ cast<SCEVAddRecExpr>(TransformForPostIncUse(Normalize, S, nullptr,
+ nullptr, Loops, SE, *SE.DT));
}
// Strip off any non-loop-dominating component from the addrec start.
const SCEV *Start = Normalized->getStart();
- const SCEV *PostLoopOffset = 0;
+ const SCEV *PostLoopOffset = nullptr;
if (!SE.properlyDominates(Start, L->getHeader())) {
PostLoopOffset = Start;
Start = SE.getConstant(Normalized->getType(), 0);
Normalized = cast<SCEVAddRecExpr>(
SE.getAddRecExpr(Start, Normalized->getStepRecurrence(SE),
Normalized->getLoop(),
- // FIXME: Normalized->getNoWrapFlags(FlagNW)
- SCEV::FlagAnyWrap));
+ Normalized->getNoWrapFlags(SCEV::FlagNW)));
}
// Strip off any non-loop-dominating component from the addrec step.
const SCEV *Step = Normalized->getStepRecurrence(SE);
- const SCEV *PostLoopScale = 0;
+ const SCEV *PostLoopScale = nullptr;
if (!SE.dominates(Step, L->getHeader())) {
PostLoopScale = Step;
Step = SE.getConstant(Normalized->getType(), 1);
Normalized =
- cast<SCEVAddRecExpr>(SE.getAddRecExpr(Start, Step,
- Normalized->getLoop(),
- // FIXME: Normalized
- // ->getNoWrapFlags(FlagNW)
- SCEV::FlagAnyWrap));
+ cast<SCEVAddRecExpr>(SE.getAddRecExpr(
+ Start, Step, Normalized->getLoop(),
+ Normalized->getNoWrapFlags(SCEV::FlagNW)));
}
// Expand the core addrec. If we need post-loop scaling, force it to
// expand to an integer type to avoid the need for additional casting.
Type *ExpandTy = PostLoopScale ? IntTy : STy;
- PHINode *PN = getAddRecExprPHILiterally(Normalized, L, ExpandTy, IntTy);
+ // In some cases, we decide to reuse an existing phi node but need to truncate
+ // it and/or invert the step.
+ Type *TruncTy = nullptr;
+ bool InvertStep = false;
+ PHINode *PN = getAddRecExprPHILiterally(Normalized, L, ExpandTy, IntTy,
+ TruncTy, InvertStep);
// Accommodate post-inc mode, if necessary.
Value *Result;
!ExpandTy->isPointerTy() && Step->isNonConstantNegative();
if (useSubtract)
Step = SE.getNegativeSCEV(Step);
- // Expand the step somewhere that dominates the loop header.
- BasicBlock *SaveInsertBB = Builder.GetInsertBlock();
- BasicBlock::iterator SaveInsertPt = Builder.GetInsertPoint();
- Value *StepV = expandCodeFor(Step, IntTy, L->getHeader()->begin());
- // Restore the insertion point to the place where the caller has
- // determined dominates all uses.
- restoreInsertPoint(SaveInsertBB, SaveInsertPt);
+ Value *StepV;
+ {
+ // Expand the step somewhere that dominates the loop header.
+ BuilderType::InsertPointGuard Guard(Builder);
+ StepV = expandCodeFor(Step, IntTy, L->getHeader()->begin());
+ }
Result = expandIVInc(PN, StepV, L, ExpandTy, IntTy, useSubtract);
}
}
+ // We have decided to reuse an induction variable of a dominating loop. Apply
+ // truncation and/or invertion of the step.
+ if (TruncTy) {
+ Type *ResTy = Result->getType();
+ // Normalize the result type.
+ if (ResTy != SE.getEffectiveSCEVType(ResTy))
+ Result = InsertNoopCastOfTo(Result, SE.getEffectiveSCEVType(ResTy));
+ // Truncate the result.
+ if (TruncTy != Result->getType()) {
+ Result = Builder.CreateTrunc(Result, TruncTy);
+ rememberInstruction(Result);
+ }
+ // Invert the result.
+ if (InvertStep) {
+ Result = Builder.CreateSub(expandCodeFor(Normalized->getStart(), TruncTy),
+ Result);
+ rememberInstruction(Result);
+ }
+ }
+
// Re-apply any non-loop-dominating scale.
if (PostLoopScale) {
+ assert(S->isAffine() && "Can't linearly scale non-affine recurrences.");
Result = InsertNoopCastOfTo(Result, IntTy);
Result = Builder.CreateMul(Result,
expandCodeFor(PostLoopScale, IntTy));
const Loop *L = S->getLoop();
// First check for an existing canonical IV in a suitable type.
- PHINode *CanonicalIV = 0;
+ PHINode *CanonicalIV = nullptr;
if (PHINode *PN = L->getCanonicalInductionVariable())
if (SE.getTypeSizeInBits(PN->getType()) >= SE.getTypeSizeInBits(Ty))
CanonicalIV = PN;
for (unsigned i = 0, e = S->getNumOperands(); i != e; ++i)
NewOps[i] = SE.getAnyExtendExpr(S->op_begin()[i], CanonicalIV->getType());
Value *V = expand(SE.getAddRecExpr(NewOps, S->getLoop(),
- // FIXME: S->getNoWrapFlags(FlagNW)
- SCEV::FlagAnyWrap));
- BasicBlock *SaveInsertBB = Builder.GetInsertBlock();
- BasicBlock::iterator SaveInsertPt = Builder.GetInsertPoint();
+ S->getNoWrapFlags(SCEV::FlagNW)));
BasicBlock::iterator NewInsertPt =
- llvm::next(BasicBlock::iterator(cast<Instruction>(V)));
+ std::next(BasicBlock::iterator(cast<Instruction>(V)));
+ BuilderType::InsertPointGuard Guard(Builder);
while (isa<PHINode>(NewInsertPt) || isa<DbgInfoIntrinsic>(NewInsertPt) ||
isa<LandingPadInst>(NewInsertPt))
++NewInsertPt;
- V = expandCodeFor(SE.getTruncateExpr(SE.getUnknown(V), Ty), 0,
+ V = expandCodeFor(SE.getTruncateExpr(SE.getUnknown(V), Ty), nullptr,
NewInsertPt);
- restoreInsertPoint(SaveInsertBB, SaveInsertPt);
return V;
}
if (!S->getStart()->isZero()) {
SmallVector<const SCEV *, 4> NewOps(S->op_begin(), S->op_end());
NewOps[0] = SE.getConstant(Ty, 0);
- // FIXME: can use S->getNoWrapFlags()
- const SCEV *Rest = SE.getAddRecExpr(NewOps, L, SCEV::FlagAnyWrap);
+ const SCEV *Rest = SE.getAddRecExpr(NewOps, L,
+ S->getNoWrapFlags(SCEV::FlagNW));
// Turn things like ptrtoint+arithmetic+inttoptr into GEP. See the
// comments on expandAddToGEP for details.
Header->begin());
rememberInstruction(CanonicalIV);
+ SmallSet<BasicBlock *, 4> PredSeen;
Constant *One = ConstantInt::get(Ty, 1);
for (pred_iterator HPI = HPB; HPI != HPE; ++HPI) {
BasicBlock *HP = *HPI;
+ if (!PredSeen.insert(HP))
+ continue;
+
if (L->contains(HP)) {
// Insert a unit add instruction right before the terminator
// corresponding to the back-edge.
while (InsertPt != Builder.GetInsertPoint()
&& (isInsertedInstruction(InsertPt)
|| isa<DbgInfoIntrinsic>(InsertPt))) {
- InsertPt = llvm::next(BasicBlock::iterator(InsertPt));
+ InsertPt = std::next(BasicBlock::iterator(InsertPt));
}
break;
}
// Check to see if we already expanded this here.
- std::map<std::pair<const SCEV *, Instruction *>,
- AssertingVH<Value> >::iterator I =
- InsertedExpressions.find(std::make_pair(S, InsertPt));
+ std::map<std::pair<const SCEV *, Instruction *>, TrackingVH<Value> >::iterator
+ I = InsertedExpressions.find(std::make_pair(S, InsertPt));
if (I != InsertedExpressions.end())
return I->second;
- BasicBlock *SaveInsertBB = Builder.GetInsertBlock();
- BasicBlock::iterator SaveInsertPt = Builder.GetInsertPoint();
+ BuilderType::InsertPointGuard Guard(Builder);
Builder.SetInsertPoint(InsertPt->getParent(), InsertPt);
// Expand the expression into instructions.
//
// This is independent of PostIncLoops. The mapped value simply materializes
// the expression at this insertion point. If the mapped value happened to be
- // a postinc expansion, it could be reused by a non postinc user, but only if
+ // a postinc expansion, it could be reused by a non-postinc user, but only if
// its insertion point was already at the head of the loop.
InsertedExpressions[std::make_pair(S, InsertPt)] = V;
-
- restoreInsertPoint(SaveInsertBB, SaveInsertPt);
return V;
}
InsertedValues.insert(I);
}
-void SCEVExpander::restoreInsertPoint(BasicBlock *BB, BasicBlock::iterator I) {
- Builder.SetInsertPoint(BB, I);
-}
-
/// getOrInsertCanonicalInductionVariable - This method returns the
/// canonical induction variable of the specified type for the specified
/// loop (inserting one if there is none). A canonical induction variable
SE.getConstant(Ty, 1), L, SCEV::FlagAnyWrap);
// Emit code for it.
- BasicBlock *SaveInsertBB = Builder.GetInsertBlock();
- BasicBlock::iterator SaveInsertPt = Builder.GetInsertPoint();
- PHINode *V = cast<PHINode>(expandCodeFor(H, 0, L->getHeader()->begin()));
- if (SaveInsertBB)
- restoreInsertPoint(SaveInsertBB, SaveInsertPt);
+ BuilderType::InsertPointGuard Guard(Builder);
+ PHINode *V = cast<PHINode>(expandCodeFor(H, nullptr,
+ L->getHeader()->begin()));
return V;
}
-/// Sort values by integer width for replaceCongruentIVs.
-static bool width_descending(Value *lhs, Value *rhs) {
- // Put pointers at the back and make sure pointer < pointer = false.
- if (!lhs->getType()->isIntegerTy() || !rhs->getType()->isIntegerTy())
- return rhs->getType()->isIntegerTy() && !lhs->getType()->isIntegerTy();
- return rhs->getType()->getPrimitiveSizeInBits()
- < lhs->getType()->getPrimitiveSizeInBits();
-}
-
/// replaceCongruentIVs - Check for congruent phis in this loop header and
/// replace them with their most canonical representative. Return the number of
/// phis eliminated.
/// the same context that SCEVExpander is used.
unsigned SCEVExpander::replaceCongruentIVs(Loop *L, const DominatorTree *DT,
SmallVectorImpl<WeakVH> &DeadInsts,
- const TargetLowering *TLI) {
+ const TargetTransformInfo *TTI) {
// Find integer phis in order of increasing width.
SmallVector<PHINode*, 8> Phis;
for (BasicBlock::iterator I = L->getHeader()->begin();
PHINode *Phi = dyn_cast<PHINode>(I); ++I) {
Phis.push_back(Phi);
}
- if (TLI)
- std::sort(Phis.begin(), Phis.end(), width_descending);
+ if (TTI)
+ std::sort(Phis.begin(), Phis.end(), [](Value *LHS, Value *RHS) {
+ // Put pointers at the back and make sure pointer < pointer = false.
+ if (!LHS->getType()->isIntegerTy() || !RHS->getType()->isIntegerTy())
+ return RHS->getType()->isIntegerTy() && !LHS->getType()->isIntegerTy();
+ return RHS->getType()->getPrimitiveSizeInBits() <
+ LHS->getType()->getPrimitiveSizeInBits();
+ });
unsigned NumElim = 0;
DenseMap<const SCEV *, PHINode *> ExprToIVMap;
PEnd = Phis.end(); PIter != PEnd; ++PIter) {
PHINode *Phi = *PIter;
+ // Fold constant phis. They may be congruent to other constant phis and
+ // would confuse the logic below that expects proper IVs.
+ if (Value *V = Phi->hasConstantValue()) {
+ Phi->replaceAllUsesWith(V);
+ DeadInsts.push_back(Phi);
+ ++NumElim;
+ DEBUG_WITH_TYPE(DebugType, dbgs()
+ << "INDVARS: Eliminated constant iv: " << *Phi << '\n');
+ continue;
+ }
+
if (!SE.isSCEVable(Phi->getType()))
continue;
PHINode *&OrigPhiRef = ExprToIVMap[SE.getSCEV(Phi)];
if (!OrigPhiRef) {
OrigPhiRef = Phi;
- if (Phi->getType()->isIntegerTy() && TLI
- && TLI->isTruncateFree(Phi->getType(), Phis.back()->getType())) {
+ if (Phi->getType()->isIntegerTy() && TTI
+ && TTI->isTruncateFree(Phi->getType(), Phis.back()->getType())) {
// This phi can be freely truncated to the narrowest phi type. Map the
// truncated expression to it so it will be reused for narrow types.
const SCEV *TruncExpr =
}
return NumElim;
}
+
+namespace {
+// Search for a SCEV subexpression that is not safe to expand. Any expression
+// that may expand to a !isSafeToSpeculativelyExecute value is unsafe, namely
+// UDiv expressions. We don't know if the UDiv is derived from an IR divide
+// instruction, but the important thing is that we prove the denominator is
+// nonzero before expansion.
+//
+// IVUsers already checks that IV-derived expressions are safe. So this check is
+// only needed when the expression includes some subexpression that is not IV
+// derived.
+//
+// Currently, we only allow division by a nonzero constant here. If this is
+// inadequate, we could easily allow division by SCEVUnknown by using
+// ValueTracking to check isKnownNonZero().
+//
+// We cannot generally expand recurrences unless the step dominates the loop
+// header. The expander handles the special case of affine recurrences by
+// scaling the recurrence outside the loop, but this technique isn't generally
+// applicable. Expanding a nested recurrence outside a loop requires computing
+// binomial coefficients. This could be done, but the recurrence has to be in a
+// perfectly reduced form, which can't be guaranteed.
+struct SCEVFindUnsafe {
+ ScalarEvolution &SE;
+ bool IsUnsafe;
+
+ SCEVFindUnsafe(ScalarEvolution &se): SE(se), IsUnsafe(false) {}
+
+ bool follow(const SCEV *S) {
+ if (const SCEVUDivExpr *D = dyn_cast<SCEVUDivExpr>(S)) {
+ const SCEVConstant *SC = dyn_cast<SCEVConstant>(D->getRHS());
+ if (!SC || SC->getValue()->isZero()) {
+ IsUnsafe = true;
+ return false;
+ }
+ }
+ if (const SCEVAddRecExpr *AR = dyn_cast<SCEVAddRecExpr>(S)) {
+ const SCEV *Step = AR->getStepRecurrence(SE);
+ if (!AR->isAffine() && !SE.dominates(Step, AR->getLoop()->getHeader())) {
+ IsUnsafe = true;
+ return false;
+ }
+ }
+ return true;
+ }
+ bool isDone() const { return IsUnsafe; }
+};
+}
+
+namespace llvm {
+bool isSafeToExpand(const SCEV *S, ScalarEvolution &SE) {
+ SCEVFindUnsafe Search(SE);
+ visitAll(S, Search);
+ return !Search.IsUnsafe;
+}
+}