#include "VirtRegMap.h"
#include "llvm/Value.h"
#include "llvm/Analysis/AliasAnalysis.h"
+#include "llvm/CodeGen/CalcSpillWeights.h"
#include "llvm/CodeGen/LiveVariables.h"
#include "llvm/CodeGen/MachineFrameInfo.h"
#include "llvm/CodeGen/MachineInstr.h"
if (TargetRegisterInfo::isVirtualRegister(MO.getReg()))
handleVirtualRegisterDef(MBB, MI, MIIdx, MO, MOIdx,
getOrCreateInterval(MO.getReg()));
- else if (allocatableRegs_[MO.getReg()]) {
+ else {
MachineInstr *CopyMI = NULL;
if (MI->isCopyLike())
CopyMI = MI;
handlePhysicalRegisterDef(MBB, MI, MIIdx, MO,
getOrCreateInterval(MO.getReg()), CopyMI);
- // Def of a register also defines its sub-registers.
- for (const unsigned* AS = tri_->getSubRegisters(MO.getReg()); *AS; ++AS)
- // If MI also modifies the sub-register explicitly, avoid processing it
- // more than once. Do not pass in TRI here so it checks for exact match.
- if (!MI->definesRegister(*AS))
- handlePhysicalRegisterDef(MBB, MI, MIIdx, MO,
- getOrCreateInterval(*AS), 0);
}
}
end = MIIdx.getStoreIndex();
} else {
DEBUG(dbgs() << " live through");
- end = baseIndex;
+ end = getMBBEndIdx(MBB);
}
}
return NewLI;
}
+/// shrinkToUses - After removing some uses of a register, shrink its live
+/// range to just the remaining uses. This method does not compute reaching
+/// defs for new uses, and it doesn't remove dead defs.
+bool LiveIntervals::shrinkToUses(LiveInterval *li,
+ SmallVectorImpl<MachineInstr*> *dead) {
+ DEBUG(dbgs() << "Shrink: " << *li << '\n');
+ assert(TargetRegisterInfo::isVirtualRegister(li->reg)
+ && "Can't only shrink physical registers");
+ // Find all the values used, including PHI kills.
+ SmallVector<std::pair<SlotIndex, VNInfo*>, 16> WorkList;
+
+ // Visit all instructions reading li->reg.
+ for (MachineRegisterInfo::reg_iterator I = mri_->reg_begin(li->reg);
+ MachineInstr *UseMI = I.skipInstruction();) {
+ if (UseMI->isDebugValue() || !UseMI->readsVirtualRegister(li->reg))
+ continue;
+ SlotIndex Idx = getInstructionIndex(UseMI).getUseIndex();
+ VNInfo *VNI = li->getVNInfoAt(Idx);
+ if (!VNI) {
+ // This shouldn't happen: readsVirtualRegister returns true, but there is
+ // no live value. It is likely caused by a target getting <undef> flags
+ // wrong.
+ DEBUG(dbgs() << Idx << '\t' << *UseMI
+ << "Warning: Instr claims to read non-existent value in "
+ << *li << '\n');
+ continue;
+ }
+ if (VNI->def == Idx) {
+ // Special case: An early-clobber tied operand reads and writes the
+ // register one slot early.
+ Idx = Idx.getPrevSlot();
+ VNI = li->getVNInfoAt(Idx);
+ assert(VNI && "Early-clobber tied value not available");
+ }
+ WorkList.push_back(std::make_pair(Idx, VNI));
+ }
+
+ // Create a new live interval with only minimal live segments per def.
+ LiveInterval NewLI(li->reg, 0);
+ for (LiveInterval::vni_iterator I = li->vni_begin(), E = li->vni_end();
+ I != E; ++I) {
+ VNInfo *VNI = *I;
+ if (VNI->isUnused())
+ continue;
+ // We may eliminate PHI values, so recompute PHIKill flags.
+ VNI->setHasPHIKill(false);
+ NewLI.addRange(LiveRange(VNI->def, VNI->def.getNextSlot(), VNI));
+
+ // A use tied to an early-clobber def ends at the load slot and isn't caught
+ // above. Catch it here instead. This probably only ever happens for inline
+ // assembly.
+ if (VNI->def.isUse())
+ if (VNInfo *UVNI = li->getVNInfoAt(VNI->def.getLoadIndex()))
+ WorkList.push_back(std::make_pair(VNI->def.getLoadIndex(), UVNI));
+ }
+
+ // Keep track of the PHIs that are in use.
+ SmallPtrSet<VNInfo*, 8> UsedPHIs;
+
+ // Extend intervals to reach all uses in WorkList.
+ while (!WorkList.empty()) {
+ SlotIndex Idx = WorkList.back().first;
+ VNInfo *VNI = WorkList.back().second;
+ WorkList.pop_back();
+ const MachineBasicBlock *MBB = getMBBFromIndex(Idx);
+ SlotIndex BlockStart = getMBBStartIdx(MBB);
+
+ // Extend the live range for VNI to be live at Idx.
+ if (VNInfo *ExtVNI = NewLI.extendInBlock(BlockStart, Idx)) {
+ (void)ExtVNI;
+ assert(ExtVNI == VNI && "Unexpected existing value number");
+ // Is this a PHIDef we haven't seen before?
+ if (!VNI->isPHIDef() || VNI->def != BlockStart || !UsedPHIs.insert(VNI))
+ continue;
+ // The PHI is live, make sure the predecessors are live-out.
+ for (MachineBasicBlock::const_pred_iterator PI = MBB->pred_begin(),
+ PE = MBB->pred_end(); PI != PE; ++PI) {
+ SlotIndex Stop = getMBBEndIdx(*PI).getPrevSlot();
+ VNInfo *PVNI = li->getVNInfoAt(Stop);
+ // A predecessor is not required to have a live-out value for a PHI.
+ if (PVNI) {
+ PVNI->setHasPHIKill(true);
+ WorkList.push_back(std::make_pair(Stop, PVNI));
+ }
+ }
+ continue;
+ }
+
+ // VNI is live-in to MBB.
+ DEBUG(dbgs() << " live-in at " << BlockStart << '\n');
+ NewLI.addRange(LiveRange(BlockStart, Idx.getNextSlot(), VNI));
+
+ // Make sure VNI is live-out from the predecessors.
+ for (MachineBasicBlock::const_pred_iterator PI = MBB->pred_begin(),
+ PE = MBB->pred_end(); PI != PE; ++PI) {
+ SlotIndex Stop = getMBBEndIdx(*PI).getPrevSlot();
+ assert(li->getVNInfoAt(Stop) == VNI && "Wrong value out of predecessor");
+ WorkList.push_back(std::make_pair(Stop, VNI));
+ }
+ }
+
+ // Handle dead values.
+ bool CanSeparate = false;
+ for (LiveInterval::vni_iterator I = li->vni_begin(), E = li->vni_end();
+ I != E; ++I) {
+ VNInfo *VNI = *I;
+ if (VNI->isUnused())
+ continue;
+ LiveInterval::iterator LII = NewLI.FindLiveRangeContaining(VNI->def);
+ assert(LII != NewLI.end() && "Missing live range for PHI");
+ if (LII->end != VNI->def.getNextSlot())
+ continue;
+ if (VNI->isPHIDef()) {
+ // This is a dead PHI. Remove it.
+ VNI->setIsUnused(true);
+ NewLI.removeRange(*LII);
+ DEBUG(dbgs() << "Dead PHI at " << VNI->def << " may separate interval\n");
+ CanSeparate = true;
+ } else {
+ // This is a dead def. Make sure the instruction knows.
+ MachineInstr *MI = getInstructionFromIndex(VNI->def);
+ assert(MI && "No instruction defining live value");
+ MI->addRegisterDead(li->reg, tri_);
+ if (dead && MI->allDefsAreDead()) {
+ DEBUG(dbgs() << "All defs dead: " << VNI->def << '\t' << *MI);
+ dead->push_back(MI);
+ }
+ }
+ }
+
+ // Move the trimmed ranges back.
+ li->ranges.swap(NewLI.ranges);
+ DEBUG(dbgs() << "Shrunk: " << *li << '\n');
+ return CanSeparate;
+}
+
+
//===----------------------------------------------------------------------===//
// Register allocator hooks.
//
MachineBasicBlock::iterator
LiveIntervals::getLastSplitPoint(const LiveInterval &li,
- MachineBasicBlock *mbb) {
+ MachineBasicBlock *mbb) const {
const MachineBasicBlock *lpad = mbb->getLandingPadSuccessor();
// If li is not live into a landing pad, we can insert spill code before the
return mbb->getFirstTerminator();
}
+void LiveIntervals::addKillFlags() {
+ for (iterator I = begin(), E = end(); I != E; ++I) {
+ unsigned Reg = I->first;
+ if (TargetRegisterInfo::isPhysicalRegister(Reg))
+ continue;
+ if (mri_->reg_nodbg_empty(Reg))
+ continue;
+ LiveInterval *LI = I->second;
+
+ // Every instruction that kills Reg corresponds to a live range end point.
+ for (LiveInterval::iterator RI = LI->begin(), RE = LI->end(); RI != RE;
+ ++RI) {
+ // A LOAD index indicates an MBB edge.
+ if (RI->end.isLoad())
+ continue;
+ MachineInstr *MI = getInstructionFromIndex(RI->end);
+ if (!MI)
+ continue;
+ MI->addRegisterKilled(Reg, NULL);
+ }
+ }
+}
+
/// getReMatImplicitUse - If the remat definition MI has one (for now, we only
/// allow one) virtual register operand, then its uses are implicitly using
/// the register. Returns the virtual register.
bool
LiveIntervals::isReMaterializable(const LiveInterval &li,
const VNInfo *ValNo, MachineInstr *MI,
- const SmallVectorImpl<LiveInterval*> &SpillIs,
+ const SmallVectorImpl<LiveInterval*> *SpillIs,
bool &isLoad) {
if (DisableReMat)
return false;
// If a register operand of the re-materialized instruction is going to
// be spilled next, then it's not legal to re-materialize this instruction.
- for (unsigned i = 0, e = SpillIs.size(); i != e; ++i)
- if (ImpUse == SpillIs[i]->reg)
- return false;
+ if (SpillIs)
+ for (unsigned i = 0, e = SpillIs->size(); i != e; ++i)
+ if (ImpUse == (*SpillIs)[i]->reg)
+ return false;
}
return true;
}
/// val# of the specified interval is re-materializable.
bool LiveIntervals::isReMaterializable(const LiveInterval &li,
const VNInfo *ValNo, MachineInstr *MI) {
- SmallVector<LiveInterval*, 4> Dummy1;
bool Dummy2;
- return isReMaterializable(li, ValNo, MI, Dummy1, Dummy2);
+ return isReMaterializable(li, ValNo, MI, 0, Dummy2);
}
/// isReMaterializable - Returns true if every definition of MI of every
/// val# of the specified interval is re-materializable.
bool
LiveIntervals::isReMaterializable(const LiveInterval &li,
- const SmallVectorImpl<LiveInterval*> &SpillIs,
+ const SmallVectorImpl<LiveInterval*> *SpillIs,
bool &isLoad) {
isLoad = false;
for (LiveInterval::const_vni_iterator i = li.vni_begin(), e = li.vni_end();
// ...
// def = ...
// = use
- // It's better to start a new interval to avoid artifically
+ // It's better to start a new interval to avoid artificially
// extend the new interval.
if (MI->readsWritesVirtualRegister(li.reg) ==
std::make_pair(false,true)) {
// overflow a float. This expression behaves like 10^d for small d, but is
// more tempered for large d. At d=200 we get 6.7e33 which leaves a bit of
// headroom before overflow.
- float lc = std::pow(1 + (100.0f / (loopDepth+10)), (float)loopDepth);
+ // By the way, powf() might be unavailable here. For consistency,
+ // We may take pow(double,double).
+ float lc = std::pow(1 + (100.0 / (loopDepth + 10)), (double)loopDepth);
return (isDef + isUse) * lc;
}
-void
-LiveIntervals::normalizeSpillWeights(std::vector<LiveInterval*> &NewLIs) {
+static void normalizeSpillWeights(std::vector<LiveInterval*> &NewLIs) {
for (unsigned i = 0, e = NewLIs.size(); i != e; ++i)
- normalizeSpillWeight(*NewLIs[i]);
+ NewLIs[i]->weight =
+ normalizeSpillWeight(NewLIs[i]->weight, NewLIs[i]->getSize());
}
std::vector<LiveInterval*> LiveIntervals::
addIntervalsForSpills(const LiveInterval &li,
- const SmallVectorImpl<LiveInterval*> &SpillIs,
+ const SmallVectorImpl<LiveInterval*> *SpillIs,
const MachineLoopInfo *loopInfo, VirtRegMap &vrm) {
assert(li.isSpillable() && "attempt to spill already spilled interval!");
projects / oota-llvm.git / blobdiff