static RegisterPass<PEI>
X("prologepilog", "Prologue/Epilogue Insertion");
-// FIXME: For now, the frame index scavenging is off by default and only
-// used by the Thumb1 target. When it's the default and replaces the current
-// on-the-fly PEI scavenging for all targets, requiresRegisterScavenging()
-// will replace this.
-cl::opt<bool>
-FrameIndexVirtualScavenging("enable-frame-index-scavenging",
- cl::Hidden,
- cl::desc("Enable frame index elimination with"
- "virtual register scavenging"));
-
/// createPrologEpilogCodeInserter - This function returns a pass that inserts
/// prolog and epilog code, and eliminates abstract frame references.
///
const Function* F = Fn.getFunction();
const TargetRegisterInfo *TRI = Fn.getTarget().getRegisterInfo();
RS = TRI->requiresRegisterScavenging(Fn) ? new RegScavenger() : NULL;
+ FrameIndexVirtualScavenging = TRI->requiresFrameIndexScavenging(Fn);
// Get MachineModuleInfo so that we can track the construction of the
// frame.
/// pseudo instructions.
void PEI::calculateCallsInformation(MachineFunction &Fn) {
const TargetRegisterInfo *RegInfo = Fn.getTarget().getRegisterInfo();
+ MachineFrameInfo *FFI = Fn.getFrameInfo();
unsigned MaxCallFrameSize = 0;
- bool HasCalls = false;
+ bool HasCalls = FFI->hasCalls();
// Get the function call frame set-up and tear-down instruction opcode
int FrameSetupOpcode = RegInfo->getCallFrameSetupOpcode();
HasCalls = true;
}
- MachineFrameInfo *FFI = Fn.getFrameInfo();
FFI->setHasCalls(HasCalls);
FFI->setMaxCallFrameSize(MaxCallFrameSize);
return; // Early exit if no callee saved registers are modified!
unsigned NumFixedSpillSlots;
- const std::pair<unsigned,int> *FixedSpillSlots =
+ const TargetFrameInfo::SpillSlot *FixedSpillSlots =
TFI->getCalleeSavedSpillSlots(NumFixedSpillSlots);
// Now that we know which registers need to be saved and restored, allocate
// Check to see if this physreg must be spilled to a particular stack slot
// on this target.
- const std::pair<unsigned,int> *FixedSlot = FixedSpillSlots;
+ const TargetFrameInfo::SpillSlot *FixedSlot = FixedSpillSlots;
while (FixedSlot != FixedSpillSlots+NumFixedSpillSlots &&
- FixedSlot->first != Reg)
+ FixedSlot->Reg != Reg)
++FixedSlot;
if (FixedSlot == FixedSpillSlots + NumFixedSpillSlots) {
// the TargetRegisterClass if the stack alignment is smaller. Use the
// min.
Align = std::min(Align, StackAlign);
- FrameIdx = FFI->CreateStackObject(RC->getSize(), Align);
+ FrameIdx = FFI->CreateStackObject(RC->getSize(), Align, true);
if ((unsigned)FrameIdx < MinCSFrameIndex) MinCSFrameIndex = FrameIdx;
if ((unsigned)FrameIdx > MaxCSFrameIndex) MaxCSFrameIndex = FrameIdx;
} else {
// Spill it to the stack where we must.
- FrameIdx = FFI->CreateFixedObject(RC->getSize(), FixedSlot->second);
+ FrameIdx = FFI->CreateFixedObject(RC->getSize(), FixedSlot->Offset,
+ true, false);
}
I->setFrameIdx(FrameIdx);
// Loop over all of the stack objects, assigning sequential addresses...
MachineFrameInfo *FFI = Fn.getFrameInfo();
- unsigned MaxAlign = FFI->getMaxAlignment();
+ unsigned MaxAlign = 1;
// Start at the beginning of the local area.
// The Offset is the distance from the stack top in the direction
// Make sure the special register scavenging spill slot is closest to the
// frame pointer if a frame pointer is required.
const TargetRegisterInfo *RegInfo = Fn.getTarget().getRegisterInfo();
- if (RS && RegInfo->hasFP(Fn)) {
+ if (RS && RegInfo->hasFP(Fn) && !RegInfo->needsStackRealignment(Fn)) {
int SFI = RS->getScavengingFrameIndex();
if (SFI >= 0)
AdjustStackOffset(FFI, SFI, StackGrowsDown, Offset, MaxAlign);
// Make sure the special register scavenging spill slot is closest to the
// stack pointer.
- if (RS && !RegInfo->hasFP(Fn)) {
+ if (RS && (!RegInfo->hasFP(Fn) || RegInfo->needsStackRealignment(Fn))) {
int SFI = RS->getScavengingFrameIndex();
if (SFI >= 0)
AdjustStackOffset(FFI, SFI, StackGrowsDown, Offset, MaxAlign);
}
- // Round up the size to a multiple of the alignment, but only if there are
- // calls or alloca's in the function. This ensures that any calls to
- // subroutines have their stack frames suitably aligned.
- // Also do this if we need runtime alignment of the stack. In this case
- // offsets will be relative to SP not FP; round up the stack size so this
- // works.
- if (!RegInfo->targetHandlesStackFrameRounding() &&
- (FFI->hasCalls() || FFI->hasVarSizedObjects() ||
- (RegInfo->needsStackRealignment(Fn) &&
- FFI->getObjectIndexEnd() != 0))) {
+ if (!RegInfo->targetHandlesStackFrameRounding()) {
// If we have reserved argument space for call sites in the function
// immediately on entry to the current function, count it as part of the
// overall stack size.
- if (RegInfo->hasReservedCallFrame(Fn))
+ if (FFI->hasCalls() && RegInfo->hasReservedCallFrame(Fn))
Offset += FFI->getMaxCallFrameSize();
- unsigned AlignMask = std::max(TFI.getStackAlignment(), MaxAlign) - 1;
+ // Round up the size to a multiple of the alignment. If the function has
+ // any calls or alloca's, align to the target's StackAlignment value to
+ // ensure that the callee's frame or the alloca data is suitably aligned;
+ // otherwise, for leaf functions, align to the TransientStackAlignment
+ // value.
+ unsigned StackAlign;
+ if (FFI->hasCalls() || FFI->hasVarSizedObjects() ||
+ (RegInfo->needsStackRealignment(Fn) && FFI->getObjectIndexEnd() != 0))
+ StackAlign = TFI.getStackAlignment();
+ else
+ StackAlign = TFI.getTransientStackAlignment();
+ // If the frame pointer is eliminated, all frame offsets will be relative
+ // to SP not FP; align to MaxAlign so this works.
+ StackAlign = std::max(StackAlign, MaxAlign);
+ unsigned AlignMask = StackAlign - 1;
Offset = (Offset + AlignMask) & ~uint64_t(AlignMask);
}
// Remember the required stack alignment in case targets need it to perform
// dynamic stack alignment.
- FFI->setMaxAlignment(MaxAlign);
+ if (MaxAlign > FFI->getMaxAlignment())
+ FFI->setMaxAlignment(MaxAlign);
}
if (PrevI == BB->end())
I = BB->begin(); // The replaced instr was the first in the block.
else
- I = next(PrevI);
+ I = llvm::next(PrevI);
continue;
}
// If this instruction has a FrameIndex operand, we need to
// use that target machine register info object to eliminate
// it.
-
- TRI.eliminateFrameIndex(MI, SPAdj, FrameIndexVirtualScavenging ?
- NULL : RS);
+ int Value;
+ unsigned VReg =
+ TRI.eliminateFrameIndex(MI, SPAdj, &Value,
+ FrameIndexVirtualScavenging ? NULL : RS);
+ if (VReg) {
+ assert (FrameIndexVirtualScavenging &&
+ "Not scavenging, but virtual returned from "
+ "eliminateFrameIndex()!");
+ FrameConstantRegMap[VReg] = FrameConstantEntry(Value, SPAdj);
+ }
// Reset the iterator if we were at the beginning of the BB.
if (AtBeginning) {
}
}
-void PEI::scavengeFrameVirtualRegs(MachineFunction &Fn) {
- const TargetRegisterInfo *TRI = Fn.getTarget().getRegisterInfo();
+/// findLastUseReg - find the killing use of the specified register within
+/// the instruciton range. Return the operand number of the kill in Operand.
+static MachineBasicBlock::iterator
+findLastUseReg(MachineBasicBlock::iterator I, MachineBasicBlock::iterator ME,
+ unsigned Reg) {
+ // Scan forward to find the last use of this virtual register
+ for (++I; I != ME; ++I) {
+ MachineInstr *MI = I;
+ bool isDefInsn = false;
+ bool isKillInsn = false;
+ for (unsigned i = 0, e = MI->getNumOperands(); i != e; ++i)
+ if (MI->getOperand(i).isReg()) {
+ unsigned OpReg = MI->getOperand(i).getReg();
+ if (OpReg == 0 || !TargetRegisterInfo::isVirtualRegister(OpReg))
+ continue;
+ assert (OpReg == Reg
+ && "overlapping use of scavenged index register!");
+ // If this is the killing use, we have a candidate.
+ if (MI->getOperand(i).isKill())
+ isKillInsn = true;
+ else if (MI->getOperand(i).isDef())
+ isDefInsn = true;
+ }
+ if (isKillInsn && !isDefInsn)
+ return I;
+ }
+ // If we hit the end of the basic block, there was no kill of
+ // the virtual register, which is wrong.
+ assert (0 && "scavenged index register never killed!");
+ return ME;
+}
+/// scavengeFrameVirtualRegs - Replace all frame index virtual registers
+/// with physical registers. Use the register scavenger to find an
+/// appropriate register to use.
+void PEI::scavengeFrameVirtualRegs(MachineFunction &Fn) {
// Run through the instructions and find any virtual registers.
for (MachineFunction::iterator BB = Fn.begin(),
E = Fn.end(); BB != E; ++BB) {
RS->enterBasicBlock(BB);
- // Keep a map of which scratch reg we use for each virtual reg.
- // FIXME: Is a map like this the best solution? Seems like overkill,
- // but to get rid of it would need some fairly strong assumptions
- // that may not be valid as this gets smarter about reuse and such.
- IndexedMap<unsigned, VirtReg2IndexFunctor> ScratchRegForVirtReg;
- ScratchRegForVirtReg.grow(Fn.getRegInfo().getLastVirtReg());
-
- for (MachineBasicBlock::iterator I = BB->begin(); I != BB->end(); ++I) {
+ // FIXME: The logic flow in this function is still too convoluted.
+ // It needs a cleanup refactoring. Do that in preparation for tracking
+ // more than one scratch register value and using ranges to find
+ // available scratch registers.
+ unsigned CurrentVirtReg = 0;
+ unsigned CurrentScratchReg = 0;
+ bool havePrevValue = false;
+ int PrevValue = 0;
+ MachineInstr *PrevLastUseMI = NULL;
+ unsigned PrevLastUseOp = 0;
+ bool trackingCurrentValue = false;
+ int SPAdj = 0;
+ int Value = 0;
+
+ // The instruction stream may change in the loop, so check BB->end()
+ // directly.
+ for (MachineBasicBlock::iterator I = BB->begin(); I != BB->end(); ) {
MachineInstr *MI = I;
- for (unsigned i = 0, e = MI->getNumOperands(); i != e; ++i)
+ bool isDefInsn = false;
+ bool isKillInsn = false;
+ bool clobbersScratchReg = false;
+ bool DoIncr = true;
+ for (unsigned i = 0, e = MI->getNumOperands(); i != e; ++i) {
if (MI->getOperand(i).isReg()) {
- unsigned Reg = MI->getOperand(i).getReg();
- if (Reg && TRI->isVirtualRegister(Reg)) {
- // If we already have a scratch for this virtual register, use it
- unsigned NewReg = ScratchRegForVirtReg[Reg];
- if (!NewReg) {
- const TargetRegisterClass *RC = Fn.getRegInfo().getRegClass(Reg);
- NewReg = RS->FindUnusedReg(RC);
- if (NewReg == 0)
- // No register is "free". Scavenge a register.
- // FIXME: Track SPAdj. Zero won't always be right
- NewReg = RS->scavengeRegister(RC, I, 0);
- assert (NewReg && "unable to scavenge register!");
- ScratchRegForVirtReg[Reg] = NewReg;
+ MachineOperand &MO = MI->getOperand(i);
+ unsigned Reg = MO.getReg();
+ if (Reg == 0)
+ continue;
+ if (!TargetRegisterInfo::isVirtualRegister(Reg)) {
+ // If we have a previous scratch reg, check and see if anything
+ // here kills whatever value is in there.
+ if (Reg == CurrentScratchReg) {
+ if (MO.isUse()) {
+ // Two-address operands implicitly kill
+ if (MO.isKill() || MI->isRegTiedToDefOperand(i))
+ clobbersScratchReg = true;
+ } else {
+ assert (MO.isDef());
+ clobbersScratchReg = true;
+ }
+ }
+ continue;
+ }
+ // If this is a def, remember that this insn defines the value.
+ // This lets us properly consider insns which re-use the scratch
+ // register, such as r2 = sub r2, #imm, in the middle of the
+ // scratch range.
+ if (MO.isDef())
+ isDefInsn = true;
+
+ // Have we already allocated a scratch register for this virtual?
+ if (Reg != CurrentVirtReg) {
+ // When we first encounter a new virtual register, it
+ // must be a definition.
+ assert(MI->getOperand(i).isDef() &&
+ "frame index virtual missing def!");
+ // We can't have nested virtual register live ranges because
+ // there's only a guarantee of one scavenged register at a time.
+ assert (CurrentVirtReg == 0 &&
+ "overlapping frame index virtual registers!");
+
+ // If the target gave us information about what's in the register,
+ // we can use that to re-use scratch regs.
+ DenseMap<unsigned, FrameConstantEntry>::iterator Entry =
+ FrameConstantRegMap.find(Reg);
+ trackingCurrentValue = Entry != FrameConstantRegMap.end();
+ if (trackingCurrentValue) {
+ SPAdj = (*Entry).second.second;
+ Value = (*Entry).second.first;
+ } else
+ SPAdj = Value = 0;
+
+ // If the scratch register from the last allocation is still
+ // available, see if the value matches. If it does, just re-use it.
+ if (trackingCurrentValue && havePrevValue && PrevValue == Value) {
+ // FIXME: This assumes that the instructions in the live range
+ // for the virtual register are exclusively for the purpose
+ // of populating the value in the register. That's reasonable
+ // for these frame index registers, but it's still a very, very
+ // strong assumption. rdar://7322732. Better would be to
+ // explicitly check each instruction in the range for references
+ // to the virtual register. Only delete those insns that
+ // touch the virtual register.
+
+ // Find the last use of the new virtual register. Remove all
+ // instruction between here and there, and update the current
+ // instruction to reference the last use insn instead.
+ MachineBasicBlock::iterator LastUseMI =
+ findLastUseReg(I, BB->end(), Reg);
+
+ // Remove all instructions up 'til the last use, since they're
+ // just calculating the value we already have.
+ BB->erase(I, LastUseMI);
+ I = LastUseMI;
+
+ // Extend the live range of the scratch register
+ PrevLastUseMI->getOperand(PrevLastUseOp).setIsKill(false);
+ RS->setUsed(CurrentScratchReg);
+ CurrentVirtReg = Reg;
+
+ // We deleted the instruction we were scanning the operands of.
+ // Jump back to the instruction iterator loop. Don't increment
+ // past this instruction since we updated the iterator already.
+ DoIncr = false;
+ break;
}
- MI->getOperand(i).setReg(NewReg);
+
+ // Scavenge a new scratch register
+ CurrentVirtReg = Reg;
+ const TargetRegisterClass *RC = Fn.getRegInfo().getRegClass(Reg);
+ CurrentScratchReg = RS->FindUnusedReg(RC);
+ if (CurrentScratchReg == 0)
+ // No register is "free". Scavenge a register.
+ CurrentScratchReg = RS->scavengeRegister(RC, I, SPAdj);
+
+ PrevValue = Value;
+ }
+ // replace this reference to the virtual register with the
+ // scratch register.
+ assert (CurrentScratchReg && "Missing scratch register!");
+ MI->getOperand(i).setReg(CurrentScratchReg);
+
+ if (MI->getOperand(i).isKill()) {
+ isKillInsn = true;
+ PrevLastUseOp = i;
+ PrevLastUseMI = MI;
}
}
- RS->forward(MI);
+ }
+ // If this is the last use of the scratch, stop tracking it. The
+ // last use will be a kill operand in an instruction that does
+ // not also define the scratch register.
+ if (isKillInsn && !isDefInsn) {
+ CurrentVirtReg = 0;
+ havePrevValue = trackingCurrentValue;
+ }
+ // Similarly, notice if instruction clobbered the value in the
+ // register we're tracking for possible later reuse. This is noted
+ // above, but enforced here since the value is still live while we
+ // process the rest of the operands of the instruction.
+ if (clobbersScratchReg) {
+ havePrevValue = false;
+ CurrentScratchReg = 0;
+ }
+ if (DoIncr) {
+ RS->forward(I);
+ ++I;
+ }
}
}
}