bool isVirtRegModified(unsigned Reg) const {
assert(TargetRegisterInfo::isVirtualRegister(Reg) && "Illegal VirtReg!");
- assert(Reg - TargetRegisterInfo::FirstVirtualRegister < VirtRegModified.size()
- && "Illegal virtual register!");
+ assert(Reg - TargetRegisterInfo::FirstVirtualRegister <
+ VirtRegModified.size() && "Illegal virtual register!");
return VirtRegModified[Reg - TargetRegisterInfo::FirstVirtualRegister];
}
if (PhysRegsUseOrder.empty() ||
PhysRegsUseOrder.back() == Reg) return; // Already most recently used
- for (unsigned i = PhysRegsUseOrder.size(); i != 0; --i)
- if (areRegsEqual(Reg, PhysRegsUseOrder[i-1])) {
- unsigned RegMatch = PhysRegsUseOrder[i-1]; // remove from middle
- PhysRegsUseOrder.erase(PhysRegsUseOrder.begin()+i-1);
- // Add it to the end of the list
- PhysRegsUseOrder.push_back(RegMatch);
- if (RegMatch == Reg)
- return; // Found an exact match, exit early
- }
+ for (unsigned i = PhysRegsUseOrder.size(); i != 0; --i) {
+ unsigned RegMatch = PhysRegsUseOrder[i-1]; // remove from middle
+ if (!areRegsEqual(Reg, RegMatch)) continue;
+
+ PhysRegsUseOrder.erase(PhysRegsUseOrder.begin()+i-1);
+ // Add it to the end of the list
+ PhysRegsUseOrder.push_back(RegMatch);
+ if (RegMatch == Reg)
+ return; // Found an exact match, exit early
+ }
}
public:
/// in one of several ways: if the register is available in a physical
/// register already, it uses that physical register. If the value is not
/// in a physical register, and if there are physical registers available,
- /// it loads it into a register. If register pressure is high, and it is
- /// possible, it tries to fold the load of the virtual register into the
- /// instruction itself. It avoids doing this if register pressure is low to
- /// improve the chance that subsequent instructions can use the reloaded
- /// value. This method returns the modified instruction.
+ /// it loads it into a register: PhysReg if that is an available physical
+ /// register, otherwise any physical register of the right class.
+ /// If register pressure is high, and it is possible, it tries to fold the
+ /// load of the virtual register into the instruction itself. It avoids
+ /// doing this if register pressure is low to improve the chance that
+ /// subsequent instructions can use the reloaded value. This method
+ /// returns the modified instruction.
///
MachineInstr *reloadVirtReg(MachineBasicBlock &MBB, MachineInstr *MI,
- unsigned OpNum, SmallSet<unsigned, 4> &RRegs);
+ unsigned OpNum, SmallSet<unsigned, 4> &RRegs,
+ unsigned PhysReg);
/// ComputeLocalLiveness - Computes liveness of registers within a basic
/// block, setting the killed/dead flags as appropriate.
return SS; // Already has space allocated?
// Allocate a new stack object for this spill location...
- int FrameIdx = MF->getFrameInfo()->CreateStackObject(RC->getSize(),
- RC->getAlignment(),true);
+ int FrameIdx = MF->getFrameInfo()->CreateSpillStackObject(RC->getSize(),
+ RC->getAlignment());
- // Assign the slot...
+ // Assign the slot.
StackSlotForVirtReg[VirtReg] = FrameIdx;
return FrameIdx;
}
assert(VirtReg && "Spilling a physical register is illegal!"
" Must not have appropriate kill for the register or use exists beyond"
" the intended one.");
- DEBUG(errs() << " Spilling register " << TRI->getName(PhysReg)
+ DEBUG(dbgs() << " Spilling register " << TRI->getName(PhysReg)
<< " containing %reg" << VirtReg);
if (!isVirtRegModified(VirtReg)) {
- DEBUG(errs() << " which has not been modified, so no store necessary!");
+ DEBUG(dbgs() << " which has not been modified, so no store necessary!");
std::pair<MachineInstr*, unsigned> &LastUse = getVirtRegLastUse(VirtReg);
if (LastUse.first)
LastUse.first->getOperand(LastUse.second).setIsKill();
// modified.
const TargetRegisterClass *RC = MF->getRegInfo().getRegClass(VirtReg);
int FrameIndex = getStackSpaceFor(VirtReg, RC);
- DEBUG(errs() << " to stack slot #" << FrameIndex);
+ DEBUG(dbgs() << " to stack slot #" << FrameIndex);
// If the instruction reads the register that's spilled, (e.g. this can
// happen if it is a move to a physical register), then the spill
// instruction is not a kill.
getVirt2PhysRegMapSlot(VirtReg) = 0; // VirtReg no longer available
- DEBUG(errs() << '\n');
+ DEBUG(dbgs() << '\n');
removePhysReg(PhysReg);
}
assert(PhysRegsUsed[PhysReg] != -2 && "Non allocable reg used!");
if (PhysRegsUsed[PhysReg] || !OnlyVirtRegs)
spillVirtReg(MBB, I, PhysRegsUsed[PhysReg], PhysReg);
- } else {
- // If the selected register aliases any other registers, we must make
- // sure that one of the aliases isn't alive.
- for (const unsigned *AliasSet = TRI->getAliasSet(PhysReg);
- *AliasSet; ++AliasSet)
- if (PhysRegsUsed[*AliasSet] != -1 && // Spill aliased register.
- PhysRegsUsed[*AliasSet] != -2) // If allocatable.
- if (PhysRegsUsed[*AliasSet])
- spillVirtReg(MBB, I, PhysRegsUsed[*AliasSet], *AliasSet);
+ return;
+ }
+
+ // If the selected register aliases any other registers, we must make
+ // sure that one of the aliases isn't alive.
+ for (const unsigned *AliasSet = TRI->getAliasSet(PhysReg);
+ *AliasSet; ++AliasSet) {
+ if (PhysRegsUsed[*AliasSet] == -1 || // Spill aliased register.
+ PhysRegsUsed[*AliasSet] == -2) // If allocatable.
+ continue;
+
+ if (PhysRegsUsed[*AliasSet])
+ spillVirtReg(MBB, I, PhysRegsUsed[*AliasSet], *AliasSet);
}
}
// First check to see if we have a free register of the requested type...
unsigned PhysReg = NoFree ? 0 : getFreeReg(RC);
+ if (PhysReg != 0) {
+ // Assign the register.
+ assignVirtToPhysReg(VirtReg, PhysReg);
+ return PhysReg;
+ }
+
// If we didn't find an unused register, scavenge one now!
- if (PhysReg == 0) {
- assert(!PhysRegsUseOrder.empty() && "No allocated registers??");
-
- // Loop over all of the preallocated registers from the least recently used
- // to the most recently used. When we find one that is capable of holding
- // our register, use it.
- for (unsigned i = 0; PhysReg == 0; ++i) {
- assert(i != PhysRegsUseOrder.size() &&
- "Couldn't find a register of the appropriate class!");
-
- unsigned R = PhysRegsUseOrder[i];
-
- // We can only use this register if it holds a virtual register (ie, it
- // can be spilled). Do not use it if it is an explicitly allocated
- // physical register!
- assert(PhysRegsUsed[R] != -1 &&
- "PhysReg in PhysRegsUseOrder, but is not allocated?");
- if (PhysRegsUsed[R] && PhysRegsUsed[R] != -2) {
- // If the current register is compatible, use it.
- if (RC->contains(R)) {
- PhysReg = R;
- break;
- } else {
- // If one of the registers aliased to the current register is
- // compatible, use it.
- for (const unsigned *AliasIt = TRI->getAliasSet(R);
- *AliasIt; ++AliasIt) {
- if (RC->contains(*AliasIt) &&
- // If this is pinned down for some reason, don't use it. For
- // example, if CL is pinned, and we run across CH, don't use
- // CH as justification for using scavenging ECX (which will
- // fail).
- PhysRegsUsed[*AliasIt] != 0 &&
-
- // Make sure the register is allocatable. Don't allocate SIL on
- // x86-32.
- PhysRegsUsed[*AliasIt] != -2) {
- PhysReg = *AliasIt; // Take an aliased register
- break;
- }
- }
- }
+ assert(!PhysRegsUseOrder.empty() && "No allocated registers??");
+
+ // Loop over all of the preallocated registers from the least recently used
+ // to the most recently used. When we find one that is capable of holding
+ // our register, use it.
+ for (unsigned i = 0; PhysReg == 0; ++i) {
+ assert(i != PhysRegsUseOrder.size() &&
+ "Couldn't find a register of the appropriate class!");
+
+ unsigned R = PhysRegsUseOrder[i];
+
+ // We can only use this register if it holds a virtual register (ie, it
+ // can be spilled). Do not use it if it is an explicitly allocated
+ // physical register!
+ assert(PhysRegsUsed[R] != -1 &&
+ "PhysReg in PhysRegsUseOrder, but is not allocated?");
+ if (PhysRegsUsed[R] && PhysRegsUsed[R] != -2) {
+ // If the current register is compatible, use it.
+ if (RC->contains(R)) {
+ PhysReg = R;
+ break;
+ }
+
+ // If one of the registers aliased to the current register is
+ // compatible, use it.
+ for (const unsigned *AliasIt = TRI->getAliasSet(R);
+ *AliasIt; ++AliasIt) {
+ if (!RC->contains(*AliasIt)) continue;
+
+ // If this is pinned down for some reason, don't use it. For
+ // example, if CL is pinned, and we run across CH, don't use
+ // CH as justification for using scavenging ECX (which will
+ // fail).
+ if (PhysRegsUsed[*AliasIt] == 0) continue;
+
+ // Make sure the register is allocatable. Don't allocate SIL on
+ // x86-32.
+ if (PhysRegsUsed[*AliasIt] == -2) continue;
+
+ PhysReg = *AliasIt; // Take an aliased register
+ break;
}
}
+ }
- assert(PhysReg && "Physical register not assigned!?!?");
+ assert(PhysReg && "Physical register not assigned!?!?");
- // At this point PhysRegsUseOrder[i] is the least recently used register of
- // compatible register class. Spill it to memory and reap its remains.
- spillPhysReg(MBB, I, PhysReg);
- }
+ // At this point PhysRegsUseOrder[i] is the least recently used register of
+ // compatible register class. Spill it to memory and reap its remains.
+ spillPhysReg(MBB, I, PhysReg);
// Now that we know which register we need to assign this to, do it now!
assignVirtToPhysReg(VirtReg, PhysReg);
/// one of several ways: if the register is available in a physical register
/// already, it uses that physical register. If the value is not in a physical
/// register, and if there are physical registers available, it loads it into a
+/// register: PhysReg if that is an available physical register, otherwise any
/// register. If register pressure is high, and it is possible, it tries to
/// fold the load of the virtual register into the instruction itself. It
/// avoids doing this if register pressure is low to improve the chance that
-/// subsequent instructions can use the reloaded value. This method returns the
-/// modified instruction.
+/// subsequent instructions can use the reloaded value. This method returns
+/// the modified instruction.
///
MachineInstr *RALocal::reloadVirtReg(MachineBasicBlock &MBB, MachineInstr *MI,
unsigned OpNum,
- SmallSet<unsigned, 4> &ReloadedRegs) {
+ SmallSet<unsigned, 4> &ReloadedRegs,
+ unsigned PhysReg) {
unsigned VirtReg = MI->getOperand(OpNum).getReg();
// If the virtual register is already available, just update the instruction
// and return.
if (unsigned PR = getVirt2PhysRegMapSlot(VirtReg)) {
- MarkPhysRegRecentlyUsed(PR); // Already have this value available!
MI->getOperand(OpNum).setReg(PR); // Assign the input register
- getVirtRegLastUse(VirtReg) = std::make_pair(MI, OpNum);
+ if (!MI->isDebugValue()) {
+ // Do not do these for DBG_VALUE as they can affect codegen.
+ MarkPhysRegRecentlyUsed(PR); // Already have this value available!
+ getVirtRegLastUse(VirtReg) = std::make_pair(MI, OpNum);
+ }
return MI;
}
// Otherwise, we need to fold it into the current instruction, or reload it.
// If we have registers available to hold the value, use them.
const TargetRegisterClass *RC = MF->getRegInfo().getRegClass(VirtReg);
- unsigned PhysReg = getFreeReg(RC);
+ // If we already have a PhysReg (this happens when the instruction is a
+ // reg-to-reg copy with a PhysReg destination) use that.
+ if (!PhysReg || !TargetRegisterInfo::isPhysicalRegister(PhysReg) ||
+ !isPhysRegAvailable(PhysReg))
+ PhysReg = getFreeReg(RC);
int FrameIndex = getStackSpaceFor(VirtReg, RC);
if (PhysReg) { // Register is available, allocate it!
markVirtRegModified(VirtReg, false); // Note that this reg was just reloaded
- DEBUG(errs() << " Reloading %reg" << VirtReg << " into "
+ DEBUG(dbgs() << " Reloading %reg" << VirtReg << " into "
<< TRI->getName(PhysReg) << "\n");
// Add move instruction(s)
std::string msg;
raw_string_ostream Msg(msg);
Msg << "Ran out of registers during register allocation!";
- if (MI->getOpcode() == TargetInstrInfo::INLINEASM) {
+ if (MI->isInlineAsm()) {
Msg << "\nPlease check your inline asm statement for invalid "
<< "constraints:\n";
MI->print(Msg, TM);
}
- llvm_report_error(Msg.str());
+ report_fatal_error(Msg.str());
}
for (const unsigned *SubRegs = TRI->getSubRegisters(PhysReg);
*SubRegs; ++SubRegs) {
- if (!ReloadedRegs.insert(*SubRegs)) {
- std::string msg;
- raw_string_ostream Msg(msg);
- Msg << "Ran out of registers during register allocation!";
- if (MI->getOpcode() == TargetInstrInfo::INLINEASM) {
- Msg << "\nPlease check your inline asm statement for invalid "
- << "constraints:\n";
- MI->print(Msg, TM);
- }
- llvm_report_error(Msg.str());
+ if (ReloadedRegs.insert(*SubRegs)) continue;
+
+ std::string msg;
+ raw_string_ostream Msg(msg);
+ Msg << "Ran out of registers during register allocation!";
+ if (MI->isInlineAsm()) {
+ Msg << "\nPlease check your inline asm statement for invalid "
+ << "constraints:\n";
+ MI->print(Msg, TM);
}
+ report_fatal_error(Msg.str());
}
return MI;
/// read/mod/write register, i.e. update partial register.
static bool isReadModWriteImplicitKill(MachineInstr *MI, unsigned Reg) {
for (unsigned i = 0, e = MI->getNumOperands(); i != e; ++i) {
- MachineOperand& MO = MI->getOperand(i);
+ MachineOperand &MO = MI->getOperand(i);
if (MO.isReg() && MO.getReg() == Reg && MO.isImplicit() &&
MO.isDef() && !MO.isDead())
return true;
/// read/mod/write register, i.e. update partial register.
static bool isReadModWriteImplicitDef(MachineInstr *MI, unsigned Reg) {
for (unsigned i = 0, e = MI->getNumOperands(); i != e; ++i) {
- MachineOperand& MO = MI->getOperand(i);
+ MachineOperand &MO = MI->getOperand(i);
if (MO.isReg() && MO.getReg() == Reg && MO.isImplicit() &&
!MO.isDef() && MO.isKill())
return true;
/// ComputeLocalLiveness - Computes liveness of registers within a basic
/// block, setting the killed/dead flags as appropriate.
void RALocal::ComputeLocalLiveness(MachineBasicBlock& MBB) {
- MachineRegisterInfo& MRI = MBB.getParent()->getRegInfo();
+ MachineRegisterInfo &MRI = MBB.getParent()->getRegInfo();
// Keep track of the most recently seen previous use or def of each reg,
// so that we can update them with dead/kill markers.
DenseMap<unsigned, std::pair<MachineInstr*, unsigned> > LastUseDef;
for (MachineBasicBlock::iterator I = MBB.begin(), E = MBB.end();
I != E; ++I) {
+ if (I->isDebugValue())
+ continue;
+
for (unsigned i = 0, e = I->getNumOperands(); i != e; ++i) {
- MachineOperand& MO = I->getOperand(i);
+ MachineOperand &MO = I->getOperand(i);
// Uses don't trigger any flags, but we need to save
// them for later. Also, we have to process these
// _before_ processing the defs, since an instr
// uses regs before it defs them.
- if (MO.isReg() && MO.getReg() && MO.isUse()) {
- LastUseDef[MO.getReg()] = std::make_pair(I, i);
-
+ if (!MO.isReg() || !MO.getReg() || !MO.isUse())
+ continue;
+
+ LastUseDef[MO.getReg()] = std::make_pair(I, i);
+
+ if (TargetRegisterInfo::isVirtualRegister(MO.getReg())) continue;
+
+ const unsigned *Aliases = TRI->getAliasSet(MO.getReg());
+ if (Aliases == 0)
+ continue;
+
+ while (*Aliases) {
+ DenseMap<unsigned, std::pair<MachineInstr*, unsigned> >::iterator
+ alias = LastUseDef.find(*Aliases);
- if (TargetRegisterInfo::isVirtualRegister(MO.getReg())) continue;
+ if (alias != LastUseDef.end() && alias->second.first != I)
+ LastUseDef[*Aliases] = std::make_pair(I, i);
- const unsigned* Aliases = TRI->getAliasSet(MO.getReg());
- if (Aliases) {
- while (*Aliases) {
- DenseMap<unsigned, std::pair<MachineInstr*, unsigned> >::iterator
- alias = LastUseDef.find(*Aliases);
-
- if (alias != LastUseDef.end() && alias->second.first != I)
- LastUseDef[*Aliases] = std::make_pair(I, i);
-
- ++Aliases;
- }
- }
+ ++Aliases;
}
}
for (unsigned i = 0, e = I->getNumOperands(); i != e; ++i) {
- MachineOperand& MO = I->getOperand(i);
+ MachineOperand &MO = I->getOperand(i);
// Defs others than 2-addr redefs _do_ trigger flag changes:
// - A def followed by a def is dead
// - A use followed by a def is a kill
- if (MO.isReg() && MO.getReg() && MO.isDef()) {
- DenseMap<unsigned, std::pair<MachineInstr*, unsigned> >::iterator
- last = LastUseDef.find(MO.getReg());
- if (last != LastUseDef.end()) {
- // Check if this is a two address instruction. If so, then
- // the def does not kill the use.
- if (last->second.first == I &&
- I->isRegTiedToUseOperand(i))
- continue;
-
- MachineOperand& lastUD =
- last->second.first->getOperand(last->second.second);
- if (lastUD.isDef())
- lastUD.setIsDead(true);
- else
- lastUD.setIsKill(true);
- }
+ if (!MO.isReg() || !MO.getReg() || !MO.isDef()) continue;
+
+ DenseMap<unsigned, std::pair<MachineInstr*, unsigned> >::iterator
+ last = LastUseDef.find(MO.getReg());
+ if (last != LastUseDef.end()) {
+ // Check if this is a two address instruction. If so, then
+ // the def does not kill the use.
+ if (last->second.first == I &&
+ I->isRegTiedToUseOperand(i))
+ continue;
- LastUseDef[MO.getReg()] = std::make_pair(I, i);
+ MachineOperand &lastUD =
+ last->second.first->getOperand(last->second.second);
+ if (lastUD.isDef())
+ lastUD.setIsDead(true);
+ else
+ lastUD.setIsKill(true);
}
+
+ LastUseDef[MO.getReg()] = std::make_pair(I, i);
}
}
// Live-out (of the function) registers contain return values of the function,
// so we need to make sure they are alive at return time.
- if (!MBB.empty() && MBB.back().getDesc().isReturn()) {
- MachineInstr* Ret = &MBB.back();
+ MachineBasicBlock::iterator Ret = MBB.getFirstTerminator();
+ bool BBEndsInReturn = (Ret != MBB.end() && Ret->getDesc().isReturn());
+
+ if (BBEndsInReturn)
for (MachineRegisterInfo::liveout_iterator
I = MF->getRegInfo().liveout_begin(),
E = MF->getRegInfo().liveout_end(); I != E; ++I)
Ret->addOperand(MachineOperand::CreateReg(*I, false, true));
LastUseDef[*I] = std::make_pair(Ret, Ret->getNumOperands()-1);
}
- }
// Finally, loop over the final use/def of each reg
// in the block and determine if it is dead.
for (DenseMap<unsigned, std::pair<MachineInstr*, unsigned> >::iterator
I = LastUseDef.begin(), E = LastUseDef.end(); I != E; ++I) {
- MachineInstr* MI = I->second.first;
+ MachineInstr *MI = I->second.first;
unsigned idx = I->second.second;
- MachineOperand& MO = MI->getOperand(idx);
+ MachineOperand &MO = MI->getOperand(idx);
bool isPhysReg = TargetRegisterInfo::isPhysicalRegister(MO.getReg());
bool usedOutsideBlock = isPhysReg ? false :
UsedInMultipleBlocks.test(MO.getReg() -
TargetRegisterInfo::FirstVirtualRegister);
- if (!isPhysReg && !usedOutsideBlock)
+
+ // If the machine BB ends in a return instruction, then the value isn't used
+ // outside of the BB.
+ if (!isPhysReg && (!usedOutsideBlock || BBEndsInReturn)) {
+ // DBG_VALUE complicates this: if the only refs of a register outside
+ // this block are DBG_VALUE, we can't keep the reg live just for that,
+ // as it will cause the reg to be spilled at the end of this block when
+ // it wouldn't have been otherwise. Nullify the DBG_VALUEs when that
+ // happens.
+ bool UsedByDebugValueOnly = false;
for (MachineRegisterInfo::reg_iterator UI = MRI.reg_begin(MO.getReg()),
- UE = MRI.reg_end(); UI != UE; ++UI)
+ UE = MRI.reg_end(); UI != UE; ++UI) {
// Two cases:
// - used in another block
// - used in the same block before it is defined (loop)
- if (UI->getParent() != &MBB ||
- (MO.isDef() && UI.getOperand().isUse() && precedes(&*UI, MI))) {
- UsedInMultipleBlocks.set(MO.getReg() -
- TargetRegisterInfo::FirstVirtualRegister);
- usedOutsideBlock = true;
- break;
+ if (UI->getParent() == &MBB &&
+ !(MO.isDef() && UI.getOperand().isUse() && precedes(&*UI, MI)))
+ continue;
+
+ if (UI->isDebugValue()) {
+ UsedByDebugValueOnly = true;
+ continue;
}
-
- // Physical registers and those that are not live-out of the block
- // are killed/dead at their last use/def within this block.
- if (isPhysReg || !usedOutsideBlock) {
+
+ // A non-DBG_VALUE use means we can leave DBG_VALUE uses alone.
+ UsedInMultipleBlocks.set(MO.getReg() -
+ TargetRegisterInfo::FirstVirtualRegister);
+ usedOutsideBlock = true;
+ UsedByDebugValueOnly = false;
+ break;
+ }
+
+ if (UsedByDebugValueOnly)
+ for (MachineRegisterInfo::reg_iterator UI = MRI.reg_begin(MO.getReg()),
+ UE = MRI.reg_end(); UI != UE; ++UI)
+ if (UI->isDebugValue() &&
+ (UI->getParent() != &MBB ||
+ (MO.isDef() && precedes(&*UI, MI))))
+ UI.getOperand().setReg(0U);
+ }
+
+ // Physical registers and those that are not live-out of the block are
+ // killed/dead at their last use/def within this block.
+ if (isPhysReg || !usedOutsideBlock || BBEndsInReturn) {
if (MO.isUse()) {
// Don't mark uses that are tied to defs as kills.
if (!MI->isRegTiedToDefOperand(idx))
MO.setIsKill(true);
- } else
+ } else {
MO.setIsDead(true);
+ }
}
}
}
DEBUG({
const BasicBlock *LBB = MBB.getBasicBlock();
if (LBB)
- errs() << "\nStarting RegAlloc of BB: " << LBB->getName();
+ dbgs() << "\nStarting RegAlloc of BB: " << LBB->getName();
});
// Add live-in registers as active.
AddToPhysRegsUseOrder(Reg);
for (const unsigned *SubRegs = TRI->getSubRegisters(Reg);
*SubRegs; ++SubRegs) {
- if (PhysRegsUsed[*SubRegs] != -2) {
- AddToPhysRegsUseOrder(*SubRegs);
- PhysRegsUsed[*SubRegs] = 0; // It is free and reserved now
- MF->getRegInfo().setPhysRegUsed(*SubRegs);
- }
+ if (PhysRegsUsed[*SubRegs] == -2) continue;
+
+ AddToPhysRegsUseOrder(*SubRegs);
+ PhysRegsUsed[*SubRegs] = 0; // It is free and reserved now
+ MF->getRegInfo().setPhysRegUsed(*SubRegs);
}
}
MachineInstr *MI = MII++;
const TargetInstrDesc &TID = MI->getDesc();
DEBUG({
- errs() << "\nStarting RegAlloc of: " << *MI;
- errs() << " Regs have values: ";
+ dbgs() << "\nStarting RegAlloc of: " << *MI;
+ dbgs() << " Regs have values: ";
for (unsigned i = 0; i != TRI->getNumRegs(); ++i)
if (PhysRegsUsed[i] != -1 && PhysRegsUsed[i] != -2)
- errs() << "[" << TRI->getName(i)
+ dbgs() << "[" << TRI->getName(i)
<< ",%reg" << PhysRegsUsed[i] << "] ";
- errs() << '\n';
+ dbgs() << '\n';
});
+ // Determine whether this is a copy instruction. The cases where the
+ // source or destination are phys regs are handled specially.
+ unsigned SrcCopyReg, DstCopyReg, SrcCopySubReg, DstCopySubReg;
+ unsigned SrcCopyPhysReg = 0U;
+ bool isCopy = TII->isMoveInstr(*MI, SrcCopyReg, DstCopyReg,
+ SrcCopySubReg, DstCopySubReg);
+ if (isCopy && TargetRegisterInfo::isVirtualRegister(SrcCopyReg))
+ SrcCopyPhysReg = getVirt2PhysRegMapSlot(SrcCopyReg);
+
// Loop over the implicit uses, making sure that they are at the head of the
// use order list, so they don't get reallocated.
if (TID.ImplicitUses) {
SmallVector<unsigned, 8> Kills;
for (unsigned i = 0, e = MI->getNumOperands(); i != e; ++i) {
- MachineOperand& MO = MI->getOperand(i);
- if (MO.isReg() && MO.isKill()) {
- if (!MO.isImplicit())
- Kills.push_back(MO.getReg());
- else if (!isReadModWriteImplicitKill(MI, MO.getReg()))
- // These are extra physical register kills when a sub-register
- // is defined (def of a sub-register is a read/mod/write of the
- // larger registers). Ignore.
- Kills.push_back(MO.getReg());
- }
+ MachineOperand &MO = MI->getOperand(i);
+ if (!MO.isReg() || !MO.isKill()) continue;
+
+ if (!MO.isImplicit())
+ Kills.push_back(MO.getReg());
+ else if (!isReadModWriteImplicitKill(MI, MO.getReg()))
+ // These are extra physical register kills when a sub-register
+ // is defined (def of a sub-register is a read/mod/write of the
+ // larger registers). Ignore.
+ Kills.push_back(MO.getReg());
}
// If any physical regs are earlyclobber, spill any value they might
// have in them, then mark them unallocatable.
// If any virtual regs are earlyclobber, allocate them now (before
// freeing inputs that are killed).
- if (MI->getOpcode()==TargetInstrInfo::INLINEASM) {
- for (unsigned i = 0; i != MI->getNumOperands(); ++i) {
- MachineOperand& MO = MI->getOperand(i);
- if (MO.isReg() && MO.isDef() && MO.isEarlyClobber() &&
- MO.getReg()) {
- if (TargetRegisterInfo::isVirtualRegister(MO.getReg())) {
- unsigned DestVirtReg = MO.getReg();
- unsigned DestPhysReg;
-
- // If DestVirtReg already has a value, use it.
- if (!(DestPhysReg = getVirt2PhysRegMapSlot(DestVirtReg)))
- DestPhysReg = getReg(MBB, MI, DestVirtReg);
- MF->getRegInfo().setPhysRegUsed(DestPhysReg);
- markVirtRegModified(DestVirtReg);
- getVirtRegLastUse(DestVirtReg) =
- std::make_pair((MachineInstr*)0, 0);
- DEBUG(errs() << " Assigning " << TRI->getName(DestPhysReg)
- << " to %reg" << DestVirtReg << "\n");
- MO.setReg(DestPhysReg); // Assign the earlyclobber register
- } else {
- unsigned Reg = MO.getReg();
- if (PhysRegsUsed[Reg] == -2) continue; // Something like ESP.
- // These are extra physical register defs when a sub-register
- // is defined (def of a sub-register is a read/mod/write of the
- // larger registers). Ignore.
- if (isReadModWriteImplicitDef(MI, MO.getReg())) continue;
-
- MF->getRegInfo().setPhysRegUsed(Reg);
- spillPhysReg(MBB, MI, Reg, true); // Spill any existing value in reg
- PhysRegsUsed[Reg] = 0; // It is free and reserved now
- AddToPhysRegsUseOrder(Reg);
-
- for (const unsigned *SubRegs = TRI->getSubRegisters(Reg);
- *SubRegs; ++SubRegs) {
- if (PhysRegsUsed[*SubRegs] != -2) {
- MF->getRegInfo().setPhysRegUsed(*SubRegs);
- PhysRegsUsed[*SubRegs] = 0; // It is free and reserved now
- AddToPhysRegsUseOrder(*SubRegs);
- }
- }
+ if (MI->isInlineAsm()) {
+ for (unsigned i = 0, e = MI->getNumOperands(); i != e; ++i) {
+ MachineOperand &MO = MI->getOperand(i);
+ if (!MO.isReg() || !MO.isDef() || !MO.isEarlyClobber() ||
+ !MO.getReg())
+ continue;
+
+ if (TargetRegisterInfo::isVirtualRegister(MO.getReg())) {
+ unsigned DestVirtReg = MO.getReg();
+ unsigned DestPhysReg;
+
+ // If DestVirtReg already has a value, use it.
+ if (!(DestPhysReg = getVirt2PhysRegMapSlot(DestVirtReg)))
+ DestPhysReg = getReg(MBB, MI, DestVirtReg);
+ MF->getRegInfo().setPhysRegUsed(DestPhysReg);
+ markVirtRegModified(DestVirtReg);
+ getVirtRegLastUse(DestVirtReg) =
+ std::make_pair((MachineInstr*)0, 0);
+ DEBUG(dbgs() << " Assigning " << TRI->getName(DestPhysReg)
+ << " to %reg" << DestVirtReg << "\n");
+ MO.setReg(DestPhysReg); // Assign the earlyclobber register
+ } else {
+ unsigned Reg = MO.getReg();
+ if (PhysRegsUsed[Reg] == -2) continue; // Something like ESP.
+ // These are extra physical register defs when a sub-register
+ // is defined (def of a sub-register is a read/mod/write of the
+ // larger registers). Ignore.
+ if (isReadModWriteImplicitDef(MI, MO.getReg())) continue;
+
+ MF->getRegInfo().setPhysRegUsed(Reg);
+ spillPhysReg(MBB, MI, Reg, true); // Spill any existing value in reg
+ PhysRegsUsed[Reg] = 0; // It is free and reserved now
+ AddToPhysRegsUseOrder(Reg);
+
+ for (const unsigned *SubRegs = TRI->getSubRegisters(Reg);
+ *SubRegs; ++SubRegs) {
+ if (PhysRegsUsed[*SubRegs] == -2) continue;
+ MF->getRegInfo().setPhysRegUsed(*SubRegs);
+ PhysRegsUsed[*SubRegs] = 0; // It is free and reserved now
+ AddToPhysRegsUseOrder(*SubRegs);
}
}
}
}
+ // If a DBG_VALUE says something is located in a spilled register,
+ // change the DBG_VALUE to be undef, which prevents the register
+ // from being reloaded here. Doing that would change the generated
+ // code, unless another use immediately follows this instruction.
+ if (MI->isDebugValue() &&
+ MI->getNumOperands()==3 && MI->getOperand(0).isReg()) {
+ unsigned VirtReg = MI->getOperand(0).getReg();
+ if (VirtReg && TargetRegisterInfo::isVirtualRegister(VirtReg) &&
+ !getVirt2PhysRegMapSlot(VirtReg))
+ MI->getOperand(0).setReg(0U);
+ }
+
// Get the used operands into registers. This has the potential to spill
// incoming values if we are out of registers. Note that we completely
// ignore physical register uses here. We assume that if an explicit
//
SmallSet<unsigned, 4> ReloadedRegs;
for (unsigned i = 0; i != MI->getNumOperands(); ++i) {
- MachineOperand& MO = MI->getOperand(i);
+ MachineOperand &MO = MI->getOperand(i);
// here we are looking for only used operands (never def&use)
if (MO.isReg() && !MO.isDef() && MO.getReg() && !MO.isImplicit() &&
TargetRegisterInfo::isVirtualRegister(MO.getReg()))
- MI = reloadVirtReg(MBB, MI, i, ReloadedRegs);
+ MI = reloadVirtReg(MBB, MI, i, ReloadedRegs,
+ isCopy ? DstCopyReg : 0);
}
// If this instruction is the last user of this register, kill the
"Silently clearing a virtual register?");
}
- if (PhysReg) {
- DEBUG(errs() << " Last use of " << TRI->getName(PhysReg)
- << "[%reg" << VirtReg <<"], removing it from live set\n");
- removePhysReg(PhysReg);
- for (const unsigned *SubRegs = TRI->getSubRegisters(PhysReg);
- *SubRegs; ++SubRegs) {
- if (PhysRegsUsed[*SubRegs] != -2) {
- DEBUG(errs() << " Last use of "
- << TRI->getName(*SubRegs) << "[%reg" << VirtReg
- <<"], removing it from live set\n");
- removePhysReg(*SubRegs);
- }
+ if (!PhysReg) continue;
+
+ DEBUG(dbgs() << " Last use of " << TRI->getName(PhysReg)
+ << "[%reg" << VirtReg <<"], removing it from live set\n");
+ removePhysReg(PhysReg);
+ for (const unsigned *SubRegs = TRI->getSubRegisters(PhysReg);
+ *SubRegs; ++SubRegs) {
+ if (PhysRegsUsed[*SubRegs] != -2) {
+ DEBUG(dbgs() << " Last use of "
+ << TRI->getName(*SubRegs) << "[%reg" << VirtReg
+ <<"], removing it from live set\n");
+ removePhysReg(*SubRegs);
}
}
}
// Loop over all of the operands of the instruction, spilling registers that
// are defined, and marking explicit destinations in the PhysRegsUsed map.
for (unsigned i = 0, e = MI->getNumOperands(); i != e; ++i) {
- MachineOperand& MO = MI->getOperand(i);
- if (MO.isReg() && MO.isDef() && !MO.isImplicit() && MO.getReg() &&
- !MO.isEarlyClobber() &&
- TargetRegisterInfo::isPhysicalRegister(MO.getReg())) {
- unsigned Reg = MO.getReg();
- if (PhysRegsUsed[Reg] == -2) continue; // Something like ESP.
- // These are extra physical register defs when a sub-register
- // is defined (def of a sub-register is a read/mod/write of the
- // larger registers). Ignore.
- if (isReadModWriteImplicitDef(MI, MO.getReg())) continue;
-
- MF->getRegInfo().setPhysRegUsed(Reg);
- spillPhysReg(MBB, MI, Reg, true); // Spill any existing value in reg
- PhysRegsUsed[Reg] = 0; // It is free and reserved now
- AddToPhysRegsUseOrder(Reg);
-
- for (const unsigned *SubRegs = TRI->getSubRegisters(Reg);
- *SubRegs; ++SubRegs) {
- if (PhysRegsUsed[*SubRegs] != -2) {
- MF->getRegInfo().setPhysRegUsed(*SubRegs);
- PhysRegsUsed[*SubRegs] = 0; // It is free and reserved now
- AddToPhysRegsUseOrder(*SubRegs);
- }
- }
+ MachineOperand &MO = MI->getOperand(i);
+ if (!MO.isReg() || !MO.isDef() || MO.isImplicit() || !MO.getReg() ||
+ MO.isEarlyClobber() ||
+ !TargetRegisterInfo::isPhysicalRegister(MO.getReg()))
+ continue;
+
+ unsigned Reg = MO.getReg();
+ if (PhysRegsUsed[Reg] == -2) continue; // Something like ESP.
+ // These are extra physical register defs when a sub-register
+ // is defined (def of a sub-register is a read/mod/write of the
+ // larger registers). Ignore.
+ if (isReadModWriteImplicitDef(MI, MO.getReg())) continue;
+
+ MF->getRegInfo().setPhysRegUsed(Reg);
+ spillPhysReg(MBB, MI, Reg, true); // Spill any existing value in reg
+ PhysRegsUsed[Reg] = 0; // It is free and reserved now
+ AddToPhysRegsUseOrder(Reg);
+
+ for (const unsigned *SubRegs = TRI->getSubRegisters(Reg);
+ *SubRegs; ++SubRegs) {
+ if (PhysRegsUsed[*SubRegs] == -2) continue;
+
+ MF->getRegInfo().setPhysRegUsed(*SubRegs);
+ PhysRegsUsed[*SubRegs] = 0; // It is free and reserved now
+ AddToPhysRegsUseOrder(*SubRegs);
}
}
MF->getRegInfo().setPhysRegUsed(Reg);
for (const unsigned *SubRegs = TRI->getSubRegisters(Reg);
*SubRegs; ++SubRegs) {
- if (PhysRegsUsed[*SubRegs] != -2) {
- AddToPhysRegsUseOrder(*SubRegs);
- PhysRegsUsed[*SubRegs] = 0; // It is free and reserved now
- MF->getRegInfo().setPhysRegUsed(*SubRegs);
- }
+ if (PhysRegsUsed[*SubRegs] == -2) continue;
+
+ AddToPhysRegsUseOrder(*SubRegs);
+ PhysRegsUsed[*SubRegs] = 0; // It is free and reserved now
+ MF->getRegInfo().setPhysRegUsed(*SubRegs);
}
}
}
SmallVector<unsigned, 8> DeadDefs;
for (unsigned i = 0, e = MI->getNumOperands(); i != e; ++i) {
- MachineOperand& MO = MI->getOperand(i);
+ MachineOperand &MO = MI->getOperand(i);
if (MO.isReg() && MO.isDead())
DeadDefs.push_back(MO.getReg());
}
// we need to scavenge a register.
//
for (unsigned i = 0, e = MI->getNumOperands(); i != e; ++i) {
- MachineOperand& MO = MI->getOperand(i);
- if (MO.isReg() && MO.isDef() && MO.getReg() &&
- !MO.isEarlyClobber() &&
- TargetRegisterInfo::isVirtualRegister(MO.getReg())) {
- unsigned DestVirtReg = MO.getReg();
- unsigned DestPhysReg;
-
- // If DestVirtReg already has a value, use it.
- if (!(DestPhysReg = getVirt2PhysRegMapSlot(DestVirtReg)))
+ MachineOperand &MO = MI->getOperand(i);
+ if (!MO.isReg() || !MO.isDef() || !MO.getReg() ||
+ MO.isEarlyClobber() ||
+ !TargetRegisterInfo::isVirtualRegister(MO.getReg()))
+ continue;
+
+ unsigned DestVirtReg = MO.getReg();
+ unsigned DestPhysReg;
+
+ // If DestVirtReg already has a value, use it.
+ if (!(DestPhysReg = getVirt2PhysRegMapSlot(DestVirtReg))) {
+ // If this is a copy try to reuse the input as the output;
+ // that will make the copy go away.
+ // If this is a copy, the source reg is a phys reg, and
+ // that reg is available, use that phys reg for DestPhysReg.
+ // If this is a copy, the source reg is a virtual reg, and
+ // the phys reg that was assigned to that virtual reg is now
+ // available, use that phys reg for DestPhysReg. (If it's now
+ // available that means this was the last use of the source.)
+ if (isCopy &&
+ TargetRegisterInfo::isPhysicalRegister(SrcCopyReg) &&
+ isPhysRegAvailable(SrcCopyReg)) {
+ DestPhysReg = SrcCopyReg;
+ assignVirtToPhysReg(DestVirtReg, DestPhysReg);
+ } else if (isCopy &&
+ TargetRegisterInfo::isVirtualRegister(SrcCopyReg) &&
+ SrcCopyPhysReg && isPhysRegAvailable(SrcCopyPhysReg) &&
+ MF->getRegInfo().getRegClass(DestVirtReg)->
+ contains(SrcCopyPhysReg)) {
+ DestPhysReg = SrcCopyPhysReg;
+ assignVirtToPhysReg(DestVirtReg, DestPhysReg);
+ } else
DestPhysReg = getReg(MBB, MI, DestVirtReg);
- MF->getRegInfo().setPhysRegUsed(DestPhysReg);
- markVirtRegModified(DestVirtReg);
- getVirtRegLastUse(DestVirtReg) = std::make_pair((MachineInstr*)0, 0);
- DEBUG(errs() << " Assigning " << TRI->getName(DestPhysReg)
- << " to %reg" << DestVirtReg << "\n");
- MO.setReg(DestPhysReg); // Assign the output register
}
+ MF->getRegInfo().setPhysRegUsed(DestPhysReg);
+ markVirtRegModified(DestVirtReg);
+ getVirtRegLastUse(DestVirtReg) = std::make_pair((MachineInstr*)0, 0);
+ DEBUG(dbgs() << " Assigning " << TRI->getName(DestPhysReg)
+ << " to %reg" << DestVirtReg << "\n");
+ MO.setReg(DestPhysReg); // Assign the output register
}
// If this instruction defines any registers that are immediately dead,
} else if (PhysRegsUsed[PhysReg] == -2) {
// Unallocatable register dead, ignore.
continue;
- }
-
- if (PhysReg) {
- DEBUG(errs() << " Register " << TRI->getName(PhysReg)
- << " [%reg" << VirtReg
- << "] is never used, removing it from live set\n");
- removePhysReg(PhysReg);
- for (const unsigned *AliasSet = TRI->getAliasSet(PhysReg);
- *AliasSet; ++AliasSet) {
- if (PhysRegsUsed[*AliasSet] != -2) {
- DEBUG(errs() << " Register " << TRI->getName(*AliasSet)
- << " [%reg" << *AliasSet
- << "] is never used, removing it from live set\n");
- removePhysReg(*AliasSet);
- }
+ } else if (!PhysReg)
+ continue;
+
+ DEBUG(dbgs() << " Register " << TRI->getName(PhysReg)
+ << " [%reg" << VirtReg
+ << "] is never used, removing it from live set\n");
+ removePhysReg(PhysReg);
+ for (const unsigned *AliasSet = TRI->getAliasSet(PhysReg);
+ *AliasSet; ++AliasSet) {
+ if (PhysRegsUsed[*AliasSet] != -2) {
+ DEBUG(dbgs() << " Register " << TRI->getName(*AliasSet)
+ << " [%reg" << *AliasSet
+ << "] is never used, removing it from live set\n");
+ removePhysReg(*AliasSet);
}
}
}
// Finally, if this is a noop copy instruction, zap it. (Except that if
// the copy is dead, it must be kept to avoid messing up liveness info for
// the register scavenger. See pr4100.)
- unsigned SrcReg, DstReg, SrcSubReg, DstSubReg;
- if (TII->isMoveInstr(*MI, SrcReg, DstReg, SrcSubReg, DstSubReg) &&
- SrcReg == DstReg && DeadDefs.empty())
+ if (TII->isMoveInstr(*MI, SrcCopyReg, DstCopyReg,
+ SrcCopySubReg, DstCopySubReg) &&
+ SrcCopyReg == DstCopyReg && DeadDefs.empty())
MBB.erase(MI);
}
/// runOnMachineFunction - Register allocate the whole function
///
bool RALocal::runOnMachineFunction(MachineFunction &Fn) {
- DEBUG(errs() << "Machine Function\n");
+ DEBUG(dbgs() << "Machine Function\n");
MF = &Fn;
TM = &Fn.getTarget();
TRI = TM->getRegisterInfo();
StackSlotForVirtReg.grow(LastVirtReg);
Virt2PhysRegMap.grow(LastVirtReg);
Virt2LastUseMap.grow(LastVirtReg);
- VirtRegModified.resize(LastVirtReg+1-TargetRegisterInfo::FirstVirtualRegister);
- UsedInMultipleBlocks.resize(LastVirtReg+1-TargetRegisterInfo::FirstVirtualRegister);
+ VirtRegModified.resize(LastVirtReg+1 -
+ TargetRegisterInfo::FirstVirtualRegister);
+ UsedInMultipleBlocks.resize(LastVirtReg+1 -
+ TargetRegisterInfo::FirstVirtualRegister);
// Loop over all of the basic blocks, eliminating virtual register references
for (MachineFunction::iterator MBB = Fn.begin(), MBBe = Fn.end();