//
//===----------------------------------------------------------------------===//
-#include "RegisterClassInfo.h"
#include "llvm/CodeGen/LiveInterval.h"
#include "llvm/CodeGen/LiveIntervalAnalysis.h"
#include "llvm/CodeGen/MachineRegisterInfo.h"
+#include "llvm/CodeGen/RegisterClassInfo.h"
#include "llvm/CodeGen/RegisterPressure.h"
#include "llvm/Target/TargetMachine.h"
#include "llvm/Support/Debug.h"
decreaseSetPressure(MaxSetPressure, RC, TRI);
}
+#if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
void RegisterPressure::dump(const TargetRegisterInfo *TRI) {
dbgs() << "Live In: ";
for (unsigned i = 0, e = LiveInRegs.size(); i < e; ++i)
<< '\n';
}
}
+#endif
/// Increase the current pressure as impacted by these physical registers and
/// bump the high water mark if needed.
PhysRegOperands &PhysRegOpers,
VirtRegOperands &VirtRegOpers,
const TargetRegisterInfo *TRI,
- const RegisterClassInfo *RCI) {
+ const MachineRegisterInfo *MRI) {
for(ConstMIBundleOperands OperI(MI); OperI.isValid(); ++OperI) {
const MachineOperand &MO = *OperI;
if (!MO.isReg() || !MO.getReg())
if (TargetRegisterInfo::isVirtualRegister(MO.getReg()))
VirtRegOpers.collect(MO, TRI);
- else if (RCI->isAllocatable(MO.getReg()))
+ else if (MRI->isAllocatable(MO.getReg()))
PhysRegOpers.collect(MO, TRI);
}
// Remove redundant physreg dead defs.
PhysRegOperands PhysRegOpers;
VirtRegOperands VirtRegOpers;
- collectOperands(CurrPos, PhysRegOpers, VirtRegOpers, TRI, RCI);
+ collectOperands(CurrPos, PhysRegOpers, VirtRegOpers, TRI, MRI);
// Boost pressure for all dead defs together.
increasePhysRegPressure(PhysRegOpers.DeadDefs);
PhysRegOperands PhysRegOpers;
VirtRegOperands VirtRegOpers;
- collectOperands(CurrPos, PhysRegOpers, VirtRegOpers, TRI, RCI);
+ collectOperands(CurrPos, PhysRegOpers, VirtRegOpers, TRI, MRI);
// Kill liveness at last uses.
for (unsigned i = 0, e = PhysRegOpers.Uses.size(); i < e; ++i) {
}
}
-/// Consider the pressure increase caused by traversing this instruction
-/// bottom-up. Find the pressure set with the most change beyond its pressure
-/// limit based on the tracker's current pressure, and return the change in
-/// number of register units of that pressure set introduced by this
-/// instruction.
+/// Record the upward impact of a single instruction on current register
+/// pressure. Unlike the advance/recede pressure tracking interface, this does
+/// not discover live in/outs.
///
-/// This assumes that the current LiveOut set is sufficient.
-///
-/// FIXME: This is expensive for an on-the-fly query. We need to cache the
-/// result per-SUnit with enough information to adjust for the current
-/// scheduling position. But this works as a proof of concept.
-void RegPressureTracker::
-getMaxUpwardPressureDelta(const MachineInstr *MI, RegPressureDelta &Delta,
- ArrayRef<PressureElement> CriticalPSets,
- ArrayRef<unsigned> MaxPressureLimit) {
+/// This is intended for speculative queries. It leaves pressure inconsistent
+/// with the current position, so must be restored by the caller.
+void RegPressureTracker::bumpUpwardPressure(const MachineInstr *MI) {
// Account for register pressure similar to RegPressureTracker::recede().
PhysRegOperands PhysRegOpers;
VirtRegOperands VirtRegOpers;
- collectOperands(MI, PhysRegOpers, VirtRegOpers, TRI, RCI);
-
- // Snapshot Pressure.
- // FIXME: The snapshot heap space should persist. But I'm planning to
- // summarize the pressure effect so we don't need to snapshot at all.
- std::vector<unsigned> SavedPressure = CurrSetPressure;
- std::vector<unsigned> SavedMaxPressure = P.MaxSetPressure;
+ collectOperands(MI, PhysRegOpers, VirtRegOpers, TRI, MRI);
// Boost max pressure for all dead defs together.
// Since CurrSetPressure and MaxSetPressure
// Generate liveness for uses.
for (unsigned i = 0, e = PhysRegOpers.Uses.size(); i < e; ++i) {
unsigned Reg = PhysRegOpers.Uses[i];
- if (!hasRegAlias(Reg, LivePhysRegs, TRI)
- && (findRegAlias(Reg, PhysRegOpers.Defs, TRI)
- == PhysRegOpers.Defs.end())) {
+ if (!hasRegAlias(Reg, LivePhysRegs, TRI))
increasePhysRegPressure(Reg);
- }
}
for (unsigned i = 0, e = VirtRegOpers.Uses.size(); i < e; ++i) {
unsigned Reg = VirtRegOpers.Uses[i];
- if (!LiveVirtRegs.count(Reg)
- && (std::find(VirtRegOpers.Defs.begin(), VirtRegOpers.Defs.end(), Reg)
- != VirtRegOpers.Defs.end())) {
+ if (!LiveVirtRegs.count(Reg))
increaseVirtRegPressure(Reg);
- }
}
+}
+
+/// Consider the pressure increase caused by traversing this instruction
+/// bottom-up. Find the pressure set with the most change beyond its pressure
+/// limit based on the tracker's current pressure, and return the change in
+/// number of register units of that pressure set introduced by this
+/// instruction.
+///
+/// This assumes that the current LiveOut set is sufficient.
+///
+/// FIXME: This is expensive for an on-the-fly query. We need to cache the
+/// result per-SUnit with enough information to adjust for the current
+/// scheduling position. But this works as a proof of concept.
+void RegPressureTracker::
+getMaxUpwardPressureDelta(const MachineInstr *MI, RegPressureDelta &Delta,
+ ArrayRef<PressureElement> CriticalPSets,
+ ArrayRef<unsigned> MaxPressureLimit) {
+ // Snapshot Pressure.
+ // FIXME: The snapshot heap space should persist. But I'm planning to
+ // summarize the pressure effect so we don't need to snapshot at all.
+ std::vector<unsigned> SavedPressure = CurrSetPressure;
+ std::vector<unsigned> SavedMaxPressure = P.MaxSetPressure;
+
+ bumpUpwardPressure(MI);
+
computeExcessPressureDelta(SavedPressure, CurrSetPressure, Delta, TRI);
computeMaxPressureDelta(SavedMaxPressure, P.MaxSetPressure, CriticalPSets,
MaxPressureLimit, Delta);
return false;
}
-/// Consider the pressure increase caused by traversing this instruction
-/// top-down. Find the register class with the most change in its pressure limit
-/// based on the tracker's current pressure, and return the number of excess
-/// register units of that pressure set introduced by this instruction.
+/// Record the downward impact of a single instruction on current register
+/// pressure. Unlike the advance/recede pressure tracking interface, this does
+/// not discover live in/outs.
///
-/// This assumes that the current LiveIn set is sufficient.
-void RegPressureTracker::
-getMaxDownwardPressureDelta(const MachineInstr *MI, RegPressureDelta &Delta,
- ArrayRef<PressureElement> CriticalPSets,
- ArrayRef<unsigned> MaxPressureLimit) {
+/// This is intended for speculative queries. It leaves pressure inconsistent
+/// with the current position, so must be restored by the caller.
+void RegPressureTracker::bumpDownwardPressure(const MachineInstr *MI) {
// Account for register pressure similar to RegPressureTracker::recede().
PhysRegOperands PhysRegOpers;
VirtRegOperands VirtRegOpers;
- collectOperands(MI, PhysRegOpers, VirtRegOpers, TRI, RCI);
-
- // Snapshot Pressure.
- std::vector<unsigned> SavedPressure = CurrSetPressure;
- std::vector<unsigned> SavedMaxPressure = P.MaxSetPressure;
+ collectOperands(MI, PhysRegOpers, VirtRegOpers, TRI, MRI);
// Kill liveness at last uses. Assume allocatable physregs are single-use
// rather than checking LiveIntervals.
increaseVirtRegPressure(VirtRegOpers.DeadDefs);
decreasePhysRegPressure(PhysRegOpers.DeadDefs);
decreaseVirtRegPressure(VirtRegOpers.DeadDefs);
+}
+
+/// Consider the pressure increase caused by traversing this instruction
+/// top-down. Find the register class with the most change in its pressure limit
+/// based on the tracker's current pressure, and return the number of excess
+/// register units of that pressure set introduced by this instruction.
+///
+/// This assumes that the current LiveIn set is sufficient.
+void RegPressureTracker::
+getMaxDownwardPressureDelta(const MachineInstr *MI, RegPressureDelta &Delta,
+ ArrayRef<PressureElement> CriticalPSets,
+ ArrayRef<unsigned> MaxPressureLimit) {
+ // Snapshot Pressure.
+ std::vector<unsigned> SavedPressure = CurrSetPressure;
+ std::vector<unsigned> SavedMaxPressure = P.MaxSetPressure;
+
+ bumpDownwardPressure(MI);
computeExcessPressureDelta(SavedPressure, CurrSetPressure, Delta, TRI);
computeMaxPressureDelta(SavedMaxPressure, P.MaxSetPressure, CriticalPSets,
P.MaxSetPressure.swap(SavedMaxPressure);
CurrSetPressure.swap(SavedPressure);
}
+
+/// Get the pressure of each PSet after traversing this instruction bottom-up.
+void RegPressureTracker::
+getUpwardPressure(const MachineInstr *MI,
+ std::vector<unsigned> &PressureResult,
+ std::vector<unsigned> &MaxPressureResult) {
+ // Snapshot pressure.
+ PressureResult = CurrSetPressure;
+ MaxPressureResult = P.MaxSetPressure;
+
+ bumpUpwardPressure(MI);
+
+ // Current pressure becomes the result. Restore current pressure.
+ P.MaxSetPressure.swap(MaxPressureResult);
+ CurrSetPressure.swap(PressureResult);
+}
+
+/// Get the pressure of each PSet after traversing this instruction top-down.
+void RegPressureTracker::
+getDownwardPressure(const MachineInstr *MI,
+ std::vector<unsigned> &PressureResult,
+ std::vector<unsigned> &MaxPressureResult) {
+ // Snapshot pressure.
+ PressureResult = CurrSetPressure;
+ MaxPressureResult = P.MaxSetPressure;
+
+ bumpDownwardPressure(MI);
+
+ // Current pressure becomes the result. Restore current pressure.
+ P.MaxSetPressure.swap(MaxPressureResult);
+ CurrSetPressure.swap(PressureResult);
+}