static const bool ViewISelDAGs = 0, ViewSchedDAGs = 0;
#endif
-// Scheduling heuristics
-enum SchedHeuristics {
- defaultScheduling, // Let the target specify its preference.
- noScheduling, // No scheduling, emit breadth first sequence.
- simpleScheduling, // Two pass, min. critical path, max. utilization.
- simpleNoItinScheduling, // Same as above exact using generic latency.
- listSchedulingBURR, // Bottom up reg reduction list scheduling.
- listSchedulingTD // Top-down list scheduler.
-};
-
namespace {
- cl::opt<SchedHeuristics>
+ cl::opt<ScheduleDAG::SchedHeuristics>
ISHeuristic(
"sched",
cl::desc("Choose scheduling style"),
- cl::init(defaultScheduling),
+ cl::init(ScheduleDAG::defaultScheduling),
cl::values(
- clEnumValN(defaultScheduling, "default",
+ clEnumValN(ScheduleDAG::defaultScheduling, "default",
"Target preferred scheduling style"),
- clEnumValN(noScheduling, "none",
+ clEnumValN(ScheduleDAG::noScheduling, "none",
"No scheduling: breadth first sequencing"),
- clEnumValN(simpleScheduling, "simple",
+ clEnumValN(ScheduleDAG::simpleScheduling, "simple",
"Simple two pass scheduling: minimize critical path "
"and maximize processor utilization"),
- clEnumValN(simpleNoItinScheduling, "simple-noitin",
+ clEnumValN(ScheduleDAG::simpleNoItinScheduling, "simple-noitin",
"Simple two pass scheduling: Same as simple "
"except using generic latency"),
- clEnumValN(listSchedulingBURR, "list-burr",
- "Bottom up register reduction list scheduling"),
- clEnumValN(listSchedulingTD, "list-td",
+ clEnumValN(ScheduleDAG::listSchedulingBURR, "list-burr",
+ "Bottom-up register reduction list scheduling"),
+ clEnumValN(ScheduleDAG::listSchedulingTDRR, "list-tdrr",
+ "Top-down register reduction list scheduling"),
+ clEnumValN(ScheduleDAG::listSchedulingTD, "list-td",
"Top-down list scheduler"),
clEnumValEnd));
} // namespace
const BasicBlock *LLVMBB = CurMBB->getBasicBlock();
Reloc::Model Relocs = TLI.getTargetMachine().getRelocationModel();
- // If the switch has more than 5 blocks, and at least 75% dense, then emit a
- // jump table rather than lowering the switch to a binary tree of conditional
- // branches.
+ // If the switch has more than 5 blocks, and at least 31.25% dense, and the
+ // target supports indirect branches, then emit a jump table rather than
+ // lowering the switch to a binary tree of conditional branches.
// FIXME: Make this work with PIC code
if (TLI.isOperationLegal(ISD::BRIND, TLI.getPointerTy()) &&
(Relocs == Reloc::Static || Relocs == Reloc::DynamicNoPIC) &&
uint64_t Last = cast<ConstantIntegral>(Cases.back().first)->getRawValue();
double Density = (double)Cases.size() / (double)((Last - First) + 1ULL);
- if (Density >= 0.75) {
+ if (Density >= 0.3125) {
// Create a new basic block to hold the code for loading the address
// of the jump table, and jumping to it. Update successor information;
// we will either branch to the default case for the switch, or the jump
}
+/// OptimizeNoopCopyExpression - We have determined that the specified cast
+/// instruction is a noop copy (e.g. it's casting from one pointer type to
+/// another, int->uint, or int->sbyte on PPC.
+///
+/// Return true if any changes are made.
+static bool OptimizeNoopCopyExpression(CastInst *CI) {
+ BasicBlock *DefBB = CI->getParent();
+
+ /// InsertedCasts - Only insert a cast in each block once.
+ std::map<BasicBlock*, CastInst*> InsertedCasts;
+
+ bool MadeChange = false;
+ for (Value::use_iterator UI = CI->use_begin(), E = CI->use_end();
+ UI != E; ) {
+ Use &TheUse = UI.getUse();
+ Instruction *User = cast<Instruction>(*UI);
+
+ // Figure out which BB this cast is used in. For PHI's this is the
+ // appropriate predecessor block.
+ BasicBlock *UserBB = User->getParent();
+ if (PHINode *PN = dyn_cast<PHINode>(User)) {
+ unsigned OpVal = UI.getOperandNo()/2;
+ UserBB = PN->getIncomingBlock(OpVal);
+ }
+
+ // Preincrement use iterator so we don't invalidate it.
+ ++UI;
+
+ // If this user is in the same block as the cast, don't change the cast.
+ if (UserBB == DefBB) continue;
+
+ // If we have already inserted a cast into this block, use it.
+ CastInst *&InsertedCast = InsertedCasts[UserBB];
+
+ if (!InsertedCast) {
+ BasicBlock::iterator InsertPt = UserBB->begin();
+ while (isa<PHINode>(InsertPt)) ++InsertPt;
+
+ InsertedCast =
+ new CastInst(CI->getOperand(0), CI->getType(), "", InsertPt);
+ MadeChange = true;
+ }
+
+ // Replace a use of the cast with a use of the new casat.
+ TheUse = InsertedCast;
+ }
+
+ // If we removed all uses, nuke the cast.
+ if (CI->use_empty())
+ CI->eraseFromParent();
+
+ return MadeChange;
+}
+
/// InsertGEPComputeCode - Insert code into BB to compute Ptr+PtrOffset,
/// casting to the type of GEPI.
-static Value *InsertGEPComputeCode(Value *&V, BasicBlock *BB, Instruction *GEPI,
- Value *Ptr, Value *PtrOffset) {
+static Instruction *InsertGEPComputeCode(Instruction *&V, BasicBlock *BB,
+ Instruction *GEPI, Value *Ptr,
+ Value *PtrOffset) {
if (V) return V; // Already computed.
BasicBlock::iterator InsertPt;
// Add the offset, cast it to the right type.
Ptr = BinaryOperator::createAdd(Ptr, PtrOffset, "", InsertPt);
- Ptr = new CastInst(Ptr, GEPI->getType(), "", InsertPt);
- return V = Ptr;
+ return V = new CastInst(Ptr, GEPI->getType(), "", InsertPt);
+}
+
+/// ReplaceUsesOfGEPInst - Replace all uses of RepPtr with inserted code to
+/// compute its value. The RepPtr value can be computed with Ptr+PtrOffset. One
+/// trivial way of doing this would be to evaluate Ptr+PtrOffset in RepPtr's
+/// block, then ReplaceAllUsesWith'ing everything. However, we would prefer to
+/// sink PtrOffset into user blocks where doing so will likely allow us to fold
+/// the constant add into a load or store instruction. Additionally, if a user
+/// is a pointer-pointer cast, we look through it to find its users.
+static void ReplaceUsesOfGEPInst(Instruction *RepPtr, Value *Ptr,
+ Constant *PtrOffset, BasicBlock *DefBB,
+ GetElementPtrInst *GEPI,
+ std::map<BasicBlock*,Instruction*> &InsertedExprs) {
+ while (!RepPtr->use_empty()) {
+ Instruction *User = cast<Instruction>(RepPtr->use_back());
+
+ // If the user is a Pointer-Pointer cast, recurse.
+ if (isa<CastInst>(User) && isa<PointerType>(User->getType())) {
+ ReplaceUsesOfGEPInst(User, Ptr, PtrOffset, DefBB, GEPI, InsertedExprs);
+
+ // Drop the use of RepPtr. The cast is dead. Don't delete it now, else we
+ // could invalidate an iterator.
+ User->setOperand(0, UndefValue::get(RepPtr->getType()));
+ continue;
+ }
+
+ // If this is a load of the pointer, or a store through the pointer, emit
+ // the increment into the load/store block.
+ Instruction *NewVal;
+ if (isa<LoadInst>(User) ||
+ (isa<StoreInst>(User) && User->getOperand(0) != RepPtr)) {
+ NewVal = InsertGEPComputeCode(InsertedExprs[User->getParent()],
+ User->getParent(), GEPI,
+ Ptr, PtrOffset);
+ } else {
+ // If this use is not foldable into the addressing mode, use a version
+ // emitted in the GEP block.
+ NewVal = InsertGEPComputeCode(InsertedExprs[DefBB], DefBB, GEPI,
+ Ptr, PtrOffset);
+ }
+
+ if (GEPI->getType() != RepPtr->getType()) {
+ BasicBlock::iterator IP = NewVal;
+ ++IP;
+ NewVal = new CastInst(NewVal, RepPtr->getType(), "", IP);
+ }
+ User->replaceUsesOfWith(RepPtr, NewVal);
+ }
}
/// defined, the addressing expression of the GEP cannot be folded into loads or
/// stores that use it. In this case, decompose the GEP and move constant
/// indices into blocks that use it.
-static void OptimizeGEPExpression(GetElementPtrInst *GEPI,
+static bool OptimizeGEPExpression(GetElementPtrInst *GEPI,
const TargetData *TD) {
// If this GEP is only used inside the block it is defined in, there is no
// need to rewrite it.
break;
}
}
- if (!isUsedOutsideDefBB) return;
+ if (!isUsedOutsideDefBB) return false;
// If this GEP has no non-zero constant indices, there is nothing we can do,
// ignore it.
bool hasConstantIndex = false;
+ bool hasVariableIndex = false;
for (GetElementPtrInst::op_iterator OI = GEPI->op_begin()+1,
E = GEPI->op_end(); OI != E; ++OI) {
- if (ConstantInt *CI = dyn_cast<ConstantInt>(*OI))
+ if (ConstantInt *CI = dyn_cast<ConstantInt>(*OI)) {
if (CI->getRawValue()) {
hasConstantIndex = true;
break;
}
+ } else {
+ hasVariableIndex = true;
+ }
+ }
+
+ // If this is a "GEP X, 0, 0, 0", turn this into a cast.
+ if (!hasConstantIndex && !hasVariableIndex) {
+ Value *NC = new CastInst(GEPI->getOperand(0), GEPI->getType(),
+ GEPI->getName(), GEPI);
+ GEPI->replaceAllUsesWith(NC);
+ GEPI->eraseFromParent();
+ return true;
}
+
// If this is a GEP &Alloca, 0, 0, forward subst the frame index into uses.
- if (!hasConstantIndex && !isa<AllocaInst>(GEPI->getOperand(0))) return;
+ if (!hasConstantIndex && !isa<AllocaInst>(GEPI->getOperand(0)))
+ return false;
// Otherwise, decompose the GEP instruction into multiplies and adds. Sum the
// constant offset (which we now know is non-zero) and deal with it later.
// block, otherwise we use a canonical version right next to the gep (these
// won't be foldable as addresses, so we might as well share the computation).
- std::map<BasicBlock*,Value*> InsertedExprs;
- while (!GEPI->use_empty()) {
- Instruction *User = cast<Instruction>(GEPI->use_back());
-
- // If this use is not foldable into the addressing mode, use a version
- // emitted in the GEP block.
- Value *NewVal;
- if (!isa<LoadInst>(User) &&
- (!isa<StoreInst>(User) || User->getOperand(0) == GEPI)) {
- NewVal = InsertGEPComputeCode(InsertedExprs[DefBB], DefBB, GEPI,
- Ptr, PtrOffset);
- } else {
- // Otherwise, insert the code in the User's block so it can be folded into
- // any users in that block.
- NewVal = InsertGEPComputeCode(InsertedExprs[User->getParent()],
- User->getParent(), GEPI,
- Ptr, PtrOffset);
- }
- User->replaceUsesOfWith(GEPI, NewVal);
- }
+ std::map<BasicBlock*,Instruction*> InsertedExprs;
+ ReplaceUsesOfGEPInst(GEPI, Ptr, PtrOffset, DefBB, GEPI, InsertedExprs);
// Finally, the GEP is dead, remove it.
GEPI->eraseFromParent();
+
+ return true;
}
bool SelectionDAGISel::runOnFunction(Function &Fn) {
// constants, this way the load of the constant into a vreg will not be placed
// into MBBs that are used some other way.
//
- // In this pass we also look for GEP instructions that are used across basic
- // blocks and rewrites them to improve basic-block-at-a-time selection.
+ // In this pass we also look for GEP and cast instructions that are used
+ // across basic blocks and rewrite them to improve basic-block-at-a-time
+ // selection.
+ //
//
+ bool MadeChange = true;
+ while (MadeChange) {
+ MadeChange = false;
for (Function::iterator BB = Fn.begin(), E = Fn.end(); BB != E; ++BB) {
PHINode *PN;
BasicBlock::iterator BBI;
if (isa<Constant>(PN->getIncomingValue(i)))
SplitCriticalEdge(PN->getIncomingBlock(i), BB);
- for (BasicBlock::iterator E = BB->end(); BBI != E; )
- if (GetElementPtrInst *GEPI = dyn_cast<GetElementPtrInst>(BBI++))
- OptimizeGEPExpression(GEPI, TLI.getTargetData());
+ for (BasicBlock::iterator E = BB->end(); BBI != E; ) {
+ Instruction *I = BBI++;
+ if (GetElementPtrInst *GEPI = dyn_cast<GetElementPtrInst>(I)) {
+ MadeChange |= OptimizeGEPExpression(GEPI, TLI.getTargetData());
+ } else if (CastInst *CI = dyn_cast<CastInst>(I)) {
+ // If this is a noop copy, sink it into user blocks to reduce the number
+ // of virtual registers that must be created and coallesced.
+ MVT::ValueType SrcVT = TLI.getValueType(CI->getOperand(0)->getType());
+ MVT::ValueType DstVT = TLI.getValueType(CI->getType());
+
+ // This is an fp<->int conversion?
+ if (MVT::isInteger(SrcVT) != MVT::isInteger(DstVT))
+ continue;
+
+ // If this is an extension, it will be a zero or sign extension, which
+ // isn't a noop.
+ if (SrcVT < DstVT) continue;
+
+ // If these values will be promoted, find out what they will be promoted
+ // to. This helps us consider truncates on PPC as noop copies when they
+ // are.
+ if (TLI.getTypeAction(SrcVT) == TargetLowering::Promote)
+ SrcVT = TLI.getTypeToTransformTo(SrcVT);
+ if (TLI.getTypeAction(DstVT) == TargetLowering::Promote)
+ DstVT = TLI.getTypeToTransformTo(DstVT);
+
+ // If, after promotion, these are the same types, this is a noop copy.
+ if (SrcVT == DstVT)
+ MadeChange |= OptimizeNoopCopyExpression(CI);
+ }
+ }
+ }
}
FunctionLoweringInfo FuncInfo(TLI, Fn, MF);
switch (ISHeuristic) {
default: assert(0 && "Unrecognized scheduling heuristic");
- case defaultScheduling:
+ case ScheduleDAG::defaultScheduling:
if (TLI.getSchedulingPreference() == TargetLowering::SchedulingForLatency)
SL = createTDListDAGScheduler(DAG, BB, CreateTargetHazardRecognizer());
else {
SL = createBURRListDAGScheduler(DAG, BB);
}
break;
- case noScheduling:
+ case ScheduleDAG::noScheduling:
SL = createBFS_DAGScheduler(DAG, BB);
break;
- case simpleScheduling:
+ case ScheduleDAG::simpleScheduling:
SL = createSimpleDAGScheduler(false, DAG, BB);
break;
- case simpleNoItinScheduling:
+ case ScheduleDAG::simpleNoItinScheduling:
SL = createSimpleDAGScheduler(true, DAG, BB);
break;
- case listSchedulingBURR:
+ case ScheduleDAG::listSchedulingBURR:
SL = createBURRListDAGScheduler(DAG, BB);
break;
- case listSchedulingTD:
+ case ScheduleDAG::listSchedulingTDRR:
+ SL = createTDRRListDAGScheduler(DAG, BB);
+ break;
+ case ScheduleDAG::listSchedulingTD:
SL = createTDListDAGScheduler(DAG, BB, CreateTargetHazardRecognizer());
break;
}
projects / oota-llvm.git / blobdiff