#include "llvm/Target/TargetLowering.h"
#include "llvm/Target/TargetMachine.h"
#include "llvm/Target/TargetOptions.h"
+#include "llvm/Transforms/Utils/BasicBlockUtils.h"
#include "llvm/Support/Compiler.h"
#include "llvm/Support/Debug.h"
#include "llvm/Support/ErrorHandling.h"
#include "llvm/Support/Timer.h"
#include "llvm/Support/raw_ostream.h"
+#include "llvm/ADT/PostOrderIterator.h"
#include "llvm/ADT/Statistic.h"
#include <algorithm>
using namespace llvm;
STATISTIC(NumDAGIselRetries,"Number of times dag isel has to try another path");
#ifndef NDEBUG
-STATISTIC(NumBBWithOutOfOrderLineInfo,
+STATISTIC(NumBBWithOutOfOrderLineInfo,
"Number of blocks with out of order line number info");
-STATISTIC(NumMBBWithOutOfOrderLineInfo,
+STATISTIC(NumMBBWithOutOfOrderLineInfo,
"Number of machine blocks with out of order line number info");
#endif
// SelectionDAGISel code
//===----------------------------------------------------------------------===//
-SelectionDAGISel::SelectionDAGISel(const TargetMachine &tm, CodeGenOpt::Level OL) :
+SelectionDAGISel::SelectionDAGISel(const TargetMachine &tm,
+ CodeGenOpt::Level OL) :
MachineFunctionPass(ID), TM(tm), TLI(*tm.getTargetLowering()),
FuncInfo(new FunctionLoweringInfo(TLI)),
CurDAG(new SelectionDAG(tm)),
static bool FunctionCallsSetJmp(const Function *F) {
const Module *M = F->getParent();
static const char *ReturnsTwiceFns[] = {
+ "_setjmp",
"setjmp",
"sigsetjmp",
"setjmp_syscall",
#undef NUM_RETURNS_TWICE_FNS
}
+/// SplitCriticalSideEffectEdges - Look for critical edges with a PHI value that
+/// may trap on it. In this case we have to split the edge so that the path
+/// through the predecessor block that doesn't go to the phi block doesn't
+/// execute the possibly trapping instruction.
+///
+/// This is required for correctness, so it must be done at -O0.
+///
+static void SplitCriticalSideEffectEdges(Function &Fn, Pass *SDISel) {
+ // Loop for blocks with phi nodes.
+ for (Function::iterator BB = Fn.begin(), E = Fn.end(); BB != E; ++BB) {
+ PHINode *PN = dyn_cast<PHINode>(BB->begin());
+ if (PN == 0) continue;
+
+ ReprocessBlock:
+ // For each block with a PHI node, check to see if any of the input values
+ // are potentially trapping constant expressions. Constant expressions are
+ // the only potentially trapping value that can occur as the argument to a
+ // PHI.
+ for (BasicBlock::iterator I = BB->begin(); (PN = dyn_cast<PHINode>(I)); ++I)
+ for (unsigned i = 0, e = PN->getNumIncomingValues(); i != e; ++i) {
+ ConstantExpr *CE = dyn_cast<ConstantExpr>(PN->getIncomingValue(i));
+ if (CE == 0 || !CE->canTrap()) continue;
+
+ // The only case we have to worry about is when the edge is critical.
+ // Since this block has a PHI Node, we assume it has multiple input
+ // edges: check to see if the pred has multiple successors.
+ BasicBlock *Pred = PN->getIncomingBlock(i);
+ if (Pred->getTerminator()->getNumSuccessors() == 1)
+ continue;
+
+ // Okay, we have to split this edge.
+ SplitCriticalEdge(Pred->getTerminator(),
+ GetSuccessorNumber(Pred, BB), SDISel, true);
+ goto ReprocessBlock;
+ }
+ }
+}
+
bool SelectionDAGISel::runOnMachineFunction(MachineFunction &mf) {
// Do some sanity-checking on the command-line options.
assert((!EnableFastISelVerbose || EnableFastISel) &&
DEBUG(dbgs() << "\n\n\n=== " << Fn.getName() << "\n");
+ SplitCriticalSideEffectEdges(const_cast<Function&>(Fn), this);
+
CurDAG->init(*MF);
FuncInfo->set(Fn, *MF);
SDB->init(GFI, *AA);
if (!FuncInfo->ArgDbgValues.empty())
for (MachineRegisterInfo::livein_iterator LI = RegInfo->livein_begin(),
E = RegInfo->livein_end(); LI != E; ++LI)
- if (LI->second)
+ if (LI->second)
LiveInMap.insert(std::make_pair(LI->first, LI->second));
// Insert DBG_VALUE instructions for function arguments to the entry block.
if (LDI != LiveInMap.end()) {
MachineInstr *Def = RegInfo->getVRegDef(LDI->second);
MachineBasicBlock::iterator InsertPos = Def;
- const MDNode *Variable =
+ const MDNode *Variable =
MI->getOperand(MI->getNumOperands()-1).getMetadata();
unsigned Offset = MI->getOperand(1).getImm();
// Def is never a terminator here, so it is ok to increment InsertPos.
- BuildMI(*EntryMBB, ++InsertPos, MI->getDebugLoc(),
+ BuildMI(*EntryMBB, ++InsertPos, MI->getDebugLoc(),
TII.get(TargetOpcode::DBG_VALUE))
.addReg(LDI->second, RegState::Debug)
.addImm(Offset).addMetadata(Variable);
// that COPY instructions also need DBG_VALUE, if it is the only
// user of LDI->second.
MachineInstr *CopyUseMI = NULL;
- for (MachineRegisterInfo::use_iterator
- UI = RegInfo->use_begin(LDI->second);
+ for (MachineRegisterInfo::use_iterator
+ UI = RegInfo->use_begin(LDI->second);
MachineInstr *UseMI = UI.skipInstruction();) {
if (UseMI->isDebugValue()) continue;
if (UseMI->isCopy() && !CopyUseMI && UseMI->getParent() == EntryMBB) {
}
if (CopyUseMI) {
MachineInstr *NewMI =
- BuildMI(*MF, CopyUseMI->getDebugLoc(),
+ BuildMI(*MF, CopyUseMI->getDebugLoc(),
TII.get(TargetOpcode::DBG_VALUE))
.addReg(CopyUseMI->getOperand(0).getReg(), RegState::Debug)
.addImm(Offset).addMetadata(Variable);
II = MBB->begin(), IE = MBB->end(); II != IE; ++II) {
const TargetInstrDesc &TID = TM.getInstrInfo()->get(II->getOpcode());
- // Operand 1 of an inline asm instruction indicates whether the asm
- // needs stack or not.
- if ((II->isInlineAsm() && II->getOperand(1).getImm()) ||
- (TID.isCall() && !TID.isReturn())) {
+ if ((TID.isCall() && !TID.isReturn()) ||
+ II->isStackAligningInlineAsm()) {
MFI->setHasCalls(true);
goto done;
}
// Only install this information if it tells us something.
if (NumSignBits != 1 || KnownZero != 0 || KnownOne != 0) {
- DestReg -= TargetRegisterInfo::FirstVirtualRegister;
- if (DestReg >= FuncInfo->LiveOutRegInfo.size())
- FuncInfo->LiveOutRegInfo.resize(DestReg+1);
+ FuncInfo->LiveOutRegInfo.grow(DestReg);
FunctionLoweringInfo::LiveOutInfo &LOI =
FuncInfo->LiveOutRegInfo[DestReg];
LOI.NumSignBits = NumSignBits;
DEBUG(errs() << "===== Instruction selection begins:\n");
PreprocessISelDAG();
-
+
// Select target instructions for the DAG.
{
// Number all nodes with a topological order and set DAGSize.
DAGSize = CurDAG->AssignTopologicalOrder();
-
+
// Create a dummy node (which is not added to allnodes), that adds
// a reference to the root node, preventing it from being deleted,
// and tracking any changes of the root.
HandleSDNode Dummy(CurDAG->getRoot());
ISelPosition = SelectionDAG::allnodes_iterator(CurDAG->getRoot().getNode());
++ISelPosition;
-
+
// The AllNodes list is now topological-sorted. Visit the
// nodes by starting at the end of the list (the root of the
// graph) and preceding back toward the beginning (the entry
// makes it theoretically possible to disable the DAGCombiner.
if (Node->use_empty())
continue;
-
+
SDNode *ResNode = Select(Node);
-
+
// FIXME: This is pretty gross. 'Select' should be changed to not return
// anything at all and this code should be nuked with a tactical strike.
-
+
// If node should not be replaced, continue with the next one.
if (ResNode == Node || Node->getOpcode() == ISD::DELETED_NODE)
continue;
// Replace node.
if (ResNode)
ReplaceUses(Node, ResNode);
-
+
// If after the replacement this node is not used any more,
// remove this dead node.
if (Node->use_empty()) { // Don't delete EntryToken, etc.
CurDAG->RemoveDeadNode(Node, &ISU);
}
}
-
+
CurDAG->setRoot(Dummy.getValue());
- }
+ }
DEBUG(errs() << "===== Instruction selection ends:\n");
-
+
bool SelectionDAGISel::TryToFoldFastISelLoad(const LoadInst *LI,
FastISel *FastIS) {
// Don't try to fold volatile loads. Target has to deal with alignment
// constraints.
if (LI->isVolatile()) return false;
-
+
// Figure out which vreg this is going into.
unsigned LoadReg = FastIS->getRegForValue(LI);
assert(LoadReg && "Load isn't already assigned a vreg? ");
MachineRegisterInfo::reg_iterator RI = RegInfo->reg_begin(LoadReg);
if (RI == RegInfo->reg_end())
return false;
-
+
// See if there is exactly one use of the vreg. If there are multiple uses,
// then the instruction got lowered to multiple machine instructions or the
// use of the loaded value ended up being multiple operands of the result, in
MachineRegisterInfo::reg_iterator PostRI = RI; ++PostRI;
if (PostRI != RegInfo->reg_end())
return false;
-
+
assert(RI.getOperand().isUse() &&
"The only use of the vreg must be a use, we haven't emitted the def!");
+ MachineInstr *User = &*RI;
+
+ // Set the insertion point properly. Folding the load can cause generation of
+ // other random instructions (like sign extends) for addressing modes, make
+ // sure they get inserted in a logical place before the new instruction.
+ FuncInfo->InsertPt = User;
+ FuncInfo->MBB = User->getParent();
+
// Ask the target to try folding the load.
- return FastIS->TryToFoldLoad(&*RI, RI.getOperandNo(), LI);
+ return FastIS->TryToFoldLoad(User, RI.getOperandNo(), LI);
}
#ifndef NDEBUG
Line = L;
Col = C;
}
-}
+}
-/// CheckLineNumbers - Check if machine basic block instructions follow source
+/// CheckLineNumbers - Check if machine basic block instructions follow source
/// order or not.
static void CheckLineNumbers(const MachineBasicBlock *MBB) {
unsigned Line = 0;
Line = L;
Col = C;
}
-}
+}
#endif
void SelectionDAGISel::SelectAllBasicBlocks(const Function &Fn) {
FastIS = TLI.createFastISel(*FuncInfo);
// Iterate over all basic blocks in the function.
- for (Function::const_iterator I = Fn.begin(), E = Fn.end(); I != E; ++I) {
- const BasicBlock *LLVMBB = &*I;
+ ReversePostOrderTraversal<const Function*> RPOT(&Fn);
+ for (ReversePostOrderTraversal<const Function*>::rpo_iterator
+ I = RPOT.begin(), E = RPOT.end(); I != E; ++I) {
+ const BasicBlock *LLVMBB = *I;
#ifndef NDEBUG
CheckLineNumbers(LLVMBB);
#endif
// Setup an EH landing-pad block.
if (FuncInfo->MBB->isLandingPad())
PrepareEHLandingPad();
-
+
// Lower any arguments needed in this block if this is the entry block.
if (LLVMBB == &Fn.getEntryBlock())
LowerArguments(LLVMBB);
BeforeInst = llvm::prior(llvm::prior(BI));
if (BeforeInst && isa<LoadInst>(BeforeInst) &&
BeforeInst->hasOneUse() && *BeforeInst->use_begin() == Inst &&
- TryToFoldFastISelLoad(cast<LoadInst>(BeforeInst), FastIS)) {
- // If we succeeded, don't re-select the load.
- --BI;
- }
+ TryToFoldFastISelLoad(cast<LoadInst>(BeforeInst), FastIS))
+ --BI; // If we succeeded, don't re-select the load.
continue;
}
FuncInfo->InsertPt = FuncInfo->MBB->end();
// Emit the code
if (j+1 != ej)
- SDB->visitBitTestCase(SDB->BitTestCases[i].Cases[j+1].ThisBB,
+ SDB->visitBitTestCase(SDB->BitTestCases[i],
+ SDB->BitTestCases[i].Cases[j+1].ThisBB,
SDB->BitTestCases[i].Reg,
SDB->BitTestCases[i].Cases[j],
FuncInfo->MBB);
else
- SDB->visitBitTestCase(SDB->BitTestCases[i].Default,
+ SDB->visitBitTestCase(SDB->BitTestCases[i],
+ SDB->BitTestCases[i].Default,
SDB->BitTestCases[i].Reg,
SDB->BitTestCases[i].Cases[j],
FuncInfo->MBB);
// additional DAGs necessary.
for (unsigned i = 0, e = SDB->SwitchCases.size(); i != e; ++i) {
// Set the current basic block to the mbb we wish to insert the code into
- MachineBasicBlock *ThisBB = FuncInfo->MBB = SDB->SwitchCases[i].ThisBB;
+ FuncInfo->MBB = SDB->SwitchCases[i].ThisBB;
FuncInfo->InsertPt = FuncInfo->MBB->end();
// Determine the unique successors.
if (SDB->SwitchCases[i].TrueBB != SDB->SwitchCases[i].FalseBB)
Succs.push_back(SDB->SwitchCases[i].FalseBB);
- // Emit the code. Note that this could result in ThisBB being split, so
- // we need to check for updates.
+ // Emit the code. Note that this could result in FuncInfo->MBB being split.
SDB->visitSwitchCase(SDB->SwitchCases[i], FuncInfo->MBB);
CurDAG->setRoot(SDB->getRoot());
SDB->clear();
CodeGenAndEmitDAG();
- ThisBB = FuncInfo->MBB;
+
+ // Remember the last block, now that any splitting is done, for use in
+ // populating PHI nodes in successors.
+ MachineBasicBlock *ThisBB = FuncInfo->MBB;
// Handle any PHI nodes in successors of this chunk, as if we were coming
// from the original BB before switch expansion. Note that PHI nodes can
return Ctor(this, OptLevel);
}
-ScheduleHazardRecognizer *SelectionDAGISel::CreateTargetHazardRecognizer() {
- return new ScheduleHazardRecognizer();
-}
-
//===----------------------------------------------------------------------===//
// Helper functions used by the generated instruction selector.
//===----------------------------------------------------------------------===//
Ops.push_back(InOps[InlineAsm::Op_InputChain]); // 0
Ops.push_back(InOps[InlineAsm::Op_AsmString]); // 1
Ops.push_back(InOps[InlineAsm::Op_MDNode]); // 2, !srcloc
- Ops.push_back(InOps[InlineAsm::Op_IsAlignStack]); // 3
+ Ops.push_back(InOps[InlineAsm::Op_ExtraInfo]); // 3 (SideEffect, AlignStack)
unsigned i = InlineAsm::Op_FirstOperand, e = InOps.size();
- if (InOps[e-1].getValueType() == MVT::Flag)
- --e; // Don't process a flag operand if it is here.
+ if (InOps[e-1].getValueType() == MVT::Glue)
+ --e; // Don't process a glue operand if it is here.
while (i != e) {
unsigned Flags = cast<ConstantSDNode>(InOps[i])->getZExtValue();
}
}
- // Add the flag input back if present.
+ // Add the glue input back if present.
if (e != InOps.size())
Ops.push_back(InOps.back());
}
-/// findFlagUse - Return use of EVT::Flag value produced by the specified
+/// findGlueUse - Return use of MVT::Glue value produced by the specified
/// SDNode.
///
-static SDNode *findFlagUse(SDNode *N) {
+static SDNode *findGlueUse(SDNode *N) {
unsigned FlagResNo = N->getNumValues()-1;
for (SDNode::use_iterator I = N->use_begin(), E = N->use_end(); I != E; ++I) {
SDUse &Use = I.getUse();
// never find it.
//
// The Use may be -1 (unassigned) if it is a newly allocated node. This can
- // happen because we scan down to newly selected nodes in the case of flag
+ // happen because we scan down to newly selected nodes in the case of glue
// uses.
if ((Use->getNodeId() < Def->getNodeId() && Use->getNodeId() != -1))
return false;
-
+
// Don't revisit nodes if we already scanned it and didn't fail, we know we
// won't fail if we scan it again.
if (!Visited.insert(Use))
// Ignore chain uses, they are validated by HandleMergeInputChains.
if (Use->getOperand(i).getValueType() == MVT::Other && IgnoreChains)
continue;
-
+
SDNode *N = Use->getOperand(i).getNode();
if (N == Def) {
if (Use == ImmedUse || Use == Root)
//
// * indicates nodes to be folded together.
//
- // If Root produces a flag, then it gets (even more) interesting. Since it
- // will be "glued" together with its flag use in the scheduler, we need to
+ // If Root produces glue, then it gets (even more) interesting. Since it
+ // will be "glued" together with its glue use in the scheduler, we need to
// check if it might reach N.
//
// [N*] //
// ^ / //
// f / //
// | / //
- // [FU] //
+ // [GU] //
//
- // If FU (flag use) indirectly reaches N (the load), and Root folds N
- // (call it Fold), then X is a predecessor of FU and a successor of
- // Fold. But since Fold and FU are flagged together, this will create
+ // If GU (glue use) indirectly reaches N (the load), and Root folds N
+ // (call it Fold), then X is a predecessor of GU and a successor of
+ // Fold. But since Fold and GU are glued together, this will create
// a cycle in the scheduling graph.
- // If the node has flags, walk down the graph to the "lowest" node in the
- // flagged set.
+ // If the node has glue, walk down the graph to the "lowest" node in the
+ // glueged set.
EVT VT = Root->getValueType(Root->getNumValues()-1);
- while (VT == MVT::Flag) {
- SDNode *FU = findFlagUse(Root);
- if (FU == NULL)
+ while (VT == MVT::Glue) {
+ SDNode *GU = findGlueUse(Root);
+ if (GU == NULL)
break;
- Root = FU;
+ Root = GU;
VT = Root->getValueType(Root->getNumValues()-1);
-
- // If our query node has a flag result with a use, we've walked up it. If
+
+ // If our query node has a glue result with a use, we've walked up it. If
// the user (which has already been selected) has a chain or indirectly uses
// the chain, our WalkChainUsers predicate will not consider it. Because of
// this, we cannot ignore chains in this predicate.
IgnoreChains = false;
}
-
+
SmallPtrSet<SDNode*, 16> Visited;
return !findNonImmUse(Root, N.getNode(), U, Root, Visited, IgnoreChains);
SDNode *SelectionDAGISel::Select_INLINEASM(SDNode *N) {
std::vector<SDValue> Ops(N->op_begin(), N->op_end());
SelectInlineAsmMemoryOperands(Ops);
-
+
std::vector<EVT> VTs;
VTs.push_back(MVT::Other);
- VTs.push_back(MVT::Flag);
+ VTs.push_back(MVT::Glue);
SDValue New = CurDAG->getNode(ISD::INLINEASM, N->getDebugLoc(),
VTs, &Ops[0], Ops.size());
New->setNodeId(-1);
GetVBR(uint64_t Val, const unsigned char *MatcherTable, unsigned &Idx) {
assert(Val >= 128 && "Not a VBR");
Val &= 127; // Remove first vbr bit.
-
+
unsigned Shift = 7;
uint64_t NextBits;
do {
Val |= (NextBits&127) << Shift;
Shift += 7;
} while (NextBits & 128);
-
+
return Val;
}
-/// UpdateChainsAndFlags - When a match is complete, this method updates uses of
-/// interior flag and chain results to use the new flag and chain results.
+/// UpdateChainsAndGlue - When a match is complete, this method updates uses of
+/// interior glue and chain results to use the new glue and chain results.
void SelectionDAGISel::
-UpdateChainsAndFlags(SDNode *NodeToMatch, SDValue InputChain,
- const SmallVectorImpl<SDNode*> &ChainNodesMatched,
- SDValue InputFlag,
- const SmallVectorImpl<SDNode*> &FlagResultNodesMatched,
- bool isMorphNodeTo) {
+UpdateChainsAndGlue(SDNode *NodeToMatch, SDValue InputChain,
+ const SmallVectorImpl<SDNode*> &ChainNodesMatched,
+ SDValue InputGlue,
+ const SmallVectorImpl<SDNode*> &GlueResultNodesMatched,
+ bool isMorphNodeTo) {
SmallVector<SDNode*, 4> NowDeadNodes;
-
+
ISelUpdater ISU(ISelPosition);
// Now that all the normal results are replaced, we replace the chain and
- // flag results if present.
+ // glue results if present.
if (!ChainNodesMatched.empty()) {
assert(InputChain.getNode() != 0 &&
"Matched input chains but didn't produce a chain");
// Replace all the chain results with the final chain we ended up with.
for (unsigned i = 0, e = ChainNodesMatched.size(); i != e; ++i) {
SDNode *ChainNode = ChainNodesMatched[i];
-
+
// If this node was already deleted, don't look at it.
if (ChainNode->getOpcode() == ISD::DELETED_NODE)
continue;
-
+
// Don't replace the results of the root node if we're doing a
// MorphNodeTo.
if (ChainNode == NodeToMatch && isMorphNodeTo)
continue;
-
+
SDValue ChainVal = SDValue(ChainNode, ChainNode->getNumValues()-1);
- if (ChainVal.getValueType() == MVT::Flag)
+ if (ChainVal.getValueType() == MVT::Glue)
ChainVal = ChainVal.getValue(ChainVal->getNumValues()-2);
assert(ChainVal.getValueType() == MVT::Other && "Not a chain?");
CurDAG->ReplaceAllUsesOfValueWith(ChainVal, InputChain, &ISU);
-
+
// If the node became dead and we haven't already seen it, delete it.
if (ChainNode->use_empty() &&
!std::count(NowDeadNodes.begin(), NowDeadNodes.end(), ChainNode))
NowDeadNodes.push_back(ChainNode);
}
}
-
- // If the result produces a flag, update any flag results in the matched
- // pattern with the flag result.
- if (InputFlag.getNode() != 0) {
+
+ // If the result produces glue, update any glue results in the matched
+ // pattern with the glue result.
+ if (InputGlue.getNode() != 0) {
// Handle any interior nodes explicitly marked.
- for (unsigned i = 0, e = FlagResultNodesMatched.size(); i != e; ++i) {
- SDNode *FRN = FlagResultNodesMatched[i];
-
+ for (unsigned i = 0, e = GlueResultNodesMatched.size(); i != e; ++i) {
+ SDNode *FRN = GlueResultNodesMatched[i];
+
// If this node was already deleted, don't look at it.
if (FRN->getOpcode() == ISD::DELETED_NODE)
continue;
-
- assert(FRN->getValueType(FRN->getNumValues()-1) == MVT::Flag &&
- "Doesn't have a flag result");
+
+ assert(FRN->getValueType(FRN->getNumValues()-1) == MVT::Glue &&
+ "Doesn't have a glue result");
CurDAG->ReplaceAllUsesOfValueWith(SDValue(FRN, FRN->getNumValues()-1),
- InputFlag, &ISU);
-
+ InputGlue, &ISU);
+
// If the node became dead and we haven't already seen it, delete it.
if (FRN->use_empty() &&
!std::count(NowDeadNodes.begin(), NowDeadNodes.end(), FRN))
NowDeadNodes.push_back(FRN);
}
}
-
+
if (!NowDeadNodes.empty())
CurDAG->RemoveDeadNodes(NowDeadNodes, &ISU);
-
+
DEBUG(errs() << "ISEL: Match complete!\n");
}
///
/// The walk we do here is guaranteed to be small because we quickly get down to
/// already selected nodes "below" us.
-static ChainResult
+static ChainResult
WalkChainUsers(SDNode *ChainedNode,
SmallVectorImpl<SDNode*> &ChainedNodesInPattern,
SmallVectorImpl<SDNode*> &InteriorChainedNodes) {
ChainResult Result = CR_Simple;
-
+
for (SDNode::use_iterator UI = ChainedNode->use_begin(),
E = ChainedNode->use_end(); UI != E; ++UI) {
// Make sure the use is of the chain, not some other value we produce.
if (UI.getUse().getValueType() != MVT::Other) continue;
-
+
SDNode *User = *UI;
// If we see an already-selected machine node, then we've gone beyond the
if (User->isMachineOpcode() ||
User->getOpcode() == ISD::HANDLENODE) // Root of the graph.
continue;
-
+
if (User->getOpcode() == ISD::CopyToReg ||
User->getOpcode() == ISD::CopyFromReg ||
User->getOpcode() == ISD::INLINEASM ||
if (!std::count(ChainedNodesInPattern.begin(),
ChainedNodesInPattern.end(), User))
return CR_InducesCycle;
-
+
// Otherwise we found a node that is part of our pattern. For example in:
// x = load ptr
// y = x+4
InteriorChainedNodes.push_back(User);
continue;
}
-
+
// If we found a TokenFactor, there are two cases to consider: first if the
// TokenFactor is just hanging "below" the pattern we're matching (i.e. no
// uses of the TF are in our pattern) we just want to ignore it. Second,
case CR_LeadsToInteriorNode:
break; // Otherwise, keep processing.
}
-
+
// Okay, we know we're in the interesting interior case. The TokenFactor
// is now going to be considered part of the pattern so that we rewrite its
// uses (it may have uses that are not part of the pattern) with the
InteriorChainedNodes.push_back(User);
continue;
}
-
+
return Result;
}
InteriorChainedNodes) == CR_InducesCycle)
return SDValue(); // Would induce a cycle.
}
-
+
// Okay, we have walked all the matched nodes and collected TokenFactor nodes
// that we are interested in. Form our input TokenFactor node.
SmallVector<SDValue, 3> InputChains;
if (N->getOpcode() != ISD::TokenFactor) {
if (std::count(InteriorChainedNodes.begin(),InteriorChainedNodes.end(),N))
continue;
-
+
// Otherwise, add the input chain.
SDValue InChain = ChainNodesMatched[i]->getOperand(0);
assert(InChain.getValueType() == MVT::Other && "Not a chain");
InputChains.push_back(InChain);
continue;
}
-
+
// If we have a token factor, we want to add all inputs of the token factor
// that are not part of the pattern we're matching.
for (unsigned op = 0, e = N->getNumOperands(); op != e; ++op) {
InputChains.push_back(N->getOperand(op));
}
}
-
+
SDValue Res;
if (InputChains.size() == 1)
return InputChains[0];
return CurDAG->getNode(ISD::TokenFactor, ChainNodesMatched[0]->getDebugLoc(),
MVT::Other, &InputChains[0], InputChains.size());
-}
+}
/// MorphNode - Handle morphing a node in place for the selector.
SDNode *SelectionDAGISel::
const SDValue *Ops, unsigned NumOps, unsigned EmitNodeInfo) {
// It is possible we're using MorphNodeTo to replace a node with no
// normal results with one that has a normal result (or we could be
- // adding a chain) and the input could have flags and chains as well.
+ // adding a chain) and the input could have glue and chains as well.
// In this case we need to shift the operands down.
// FIXME: This is a horrible hack and broken in obscure cases, no worse
// than the old isel though.
- int OldFlagResultNo = -1, OldChainResultNo = -1;
+ int OldGlueResultNo = -1, OldChainResultNo = -1;
unsigned NTMNumResults = Node->getNumValues();
- if (Node->getValueType(NTMNumResults-1) == MVT::Flag) {
- OldFlagResultNo = NTMNumResults-1;
+ if (Node->getValueType(NTMNumResults-1) == MVT::Glue) {
+ OldGlueResultNo = NTMNumResults-1;
if (NTMNumResults != 1 &&
Node->getValueType(NTMNumResults-2) == MVT::Other)
OldChainResultNo = NTMNumResults-2;
}
unsigned ResNumResults = Res->getNumValues();
- // Move the flag if needed.
- if ((EmitNodeInfo & OPFL_FlagOutput) && OldFlagResultNo != -1 &&
- (unsigned)OldFlagResultNo != ResNumResults-1)
- CurDAG->ReplaceAllUsesOfValueWith(SDValue(Node, OldFlagResultNo),
+ // Move the glue if needed.
+ if ((EmitNodeInfo & OPFL_GlueOutput) && OldGlueResultNo != -1 &&
+ (unsigned)OldGlueResultNo != ResNumResults-1)
+ CurDAG->ReplaceAllUsesOfValueWith(SDValue(Node, OldGlueResultNo),
SDValue(Res, ResNumResults-1));
- if ((EmitNodeInfo & OPFL_FlagOutput) != 0)
+ if ((EmitNodeInfo & OPFL_GlueOutput) != 0)
--ResNumResults;
// Move the chain reference if needed.
if ((EmitNodeInfo & OPFL_Chain) && OldChainResultNo != -1 &&
(unsigned)OldChainResultNo != ResNumResults-1)
- CurDAG->ReplaceAllUsesOfValueWith(SDValue(Node, OldChainResultNo),
+ CurDAG->ReplaceAllUsesOfValueWith(SDValue(Node, OldChainResultNo),
SDValue(Res, ResNumResults-1));
// Otherwise, no replacement happened because the node already exists. Replace
// Uses of the old node with the new one.
if (Res != Node)
CurDAG->ReplaceAllUsesWith(Node, Res);
-
+
return Res;
}
assert(RecNo < RecordedNodes.size() && "Invalid CheckSame");
return N == RecordedNodes[RecNo].first;
}
-
+
/// CheckPatternPredicate - Implements OP_CheckPatternPredicate.
LLVM_ATTRIBUTE_ALWAYS_INLINE static bool
CheckPatternPredicate(const unsigned char *MatcherTable, unsigned &MatcherIndex,
SDValue N, const TargetLowering &TLI) {
MVT::SimpleValueType VT = (MVT::SimpleValueType)MatcherTable[MatcherIndex++];
if (N.getValueType() == VT) return true;
-
+
// Handle the case when VT is iPTR.
return VT == MVT::iPTR && N.getValueType() == TLI.getPointerTy();
}
MVT::SimpleValueType VT = (MVT::SimpleValueType)MatcherTable[MatcherIndex++];
if (cast<VTSDNode>(N)->getVT() == VT)
return true;
-
+
// Handle the case when VT is iPTR.
return VT == MVT::iPTR && cast<VTSDNode>(N)->getVT() == TLI.getPointerTy();
}
int64_t Val = MatcherTable[MatcherIndex++];
if (Val & 128)
Val = GetVBR(Val, MatcherTable, MatcherIndex);
-
+
ConstantSDNode *C = dyn_cast<ConstantSDNode>(N);
return C != 0 && C->getSExtValue() == Val;
}
int64_t Val = MatcherTable[MatcherIndex++];
if (Val & 128)
Val = GetVBR(Val, MatcherTable, MatcherIndex);
-
+
if (N->getOpcode() != ISD::AND) return false;
-
+
ConstantSDNode *C = dyn_cast<ConstantSDNode>(N->getOperand(1));
return C != 0 && SDISel.CheckAndMask(N.getOperand(0), C, Val);
}
int64_t Val = MatcherTable[MatcherIndex++];
if (Val & 128)
Val = GetVBR(Val, MatcherTable, MatcherIndex);
-
+
if (N->getOpcode() != ISD::OR) return false;
-
+
ConstantSDNode *C = dyn_cast<ConstantSDNode>(N->getOperand(1));
return C != 0 && SDISel.CheckOrMask(N.getOperand(0), C, Val);
}
/// fail, set Result=true and return anything. If the current predicate is
/// known to pass, set Result=false and return the MatcherIndex to continue
/// with. If the current predicate is unknown, set Result=false and return the
-/// MatcherIndex to continue with.
+/// MatcherIndex to continue with.
static unsigned IsPredicateKnownToFail(const unsigned char *Table,
unsigned Index, SDValue N,
bool &Result, SelectionDAGISel &SDISel,
struct MatchScope {
/// FailIndex - If this match fails, this is the index to continue with.
unsigned FailIndex;
-
+
/// NodeStack - The node stack when the scope was formed.
SmallVector<SDValue, 4> NodeStack;
-
+
/// NumRecordedNodes - The number of recorded nodes when the scope was formed.
unsigned NumRecordedNodes;
-
+
/// NumMatchedMemRefs - The number of matched memref entries.
unsigned NumMatchedMemRefs;
-
- /// InputChain/InputFlag - The current chain/flag
- SDValue InputChain, InputFlag;
+
+ /// InputChain/InputGlue - The current chain/glue
+ SDValue InputChain, InputGlue;
/// HasChainNodesMatched - True if the ChainNodesMatched list is non-empty.
- bool HasChainNodesMatched, HasFlagResultNodesMatched;
+ bool HasChainNodesMatched, HasGlueResultNodesMatched;
};
}
case ISD::INLINEASM: return Select_INLINEASM(NodeToMatch);
case ISD::UNDEF: return Select_UNDEF(NodeToMatch);
}
-
+
assert(!NodeToMatch->isMachineOpcode() && "Node already selected!");
// Set up the node stack with NodeToMatch as the only node on the stack.
// MatchScopes - Scopes used when matching, if a match failure happens, this
// indicates where to continue checking.
SmallVector<MatchScope, 8> MatchScopes;
-
+
// RecordedNodes - This is the set of nodes that have been recorded by the
// state machine. The second value is the parent of the node, or null if the
// root is recorded.
SmallVector<std::pair<SDValue, SDNode*>, 8> RecordedNodes;
-
+
// MatchedMemRefs - This is the set of MemRef's we've seen in the input
// pattern.
SmallVector<MachineMemOperand*, 2> MatchedMemRefs;
-
- // These are the current input chain and flag for use when generating nodes.
+
+ // These are the current input chain and glue for use when generating nodes.
// Various Emit operations change these. For example, emitting a copytoreg
// uses and updates these.
- SDValue InputChain, InputFlag;
-
+ SDValue InputChain, InputGlue;
+
// ChainNodesMatched - If a pattern matches nodes that have input/output
// chains, the OPC_EmitMergeInputChains operation is emitted which indicates
// which ones they are. The result is captured into this list so that we can
// update the chain results when the pattern is complete.
SmallVector<SDNode*, 3> ChainNodesMatched;
- SmallVector<SDNode*, 3> FlagResultNodesMatched;
-
+ SmallVector<SDNode*, 3> GlueResultNodesMatched;
+
DEBUG(errs() << "ISEL: Starting pattern match on root node: ";
NodeToMatch->dump(CurDAG);
errs() << '\n');
-
+
// Determine where to start the interpreter. Normally we start at opcode #0,
// but if the state machine starts with an OPC_SwitchOpcode, then we
// accelerate the first lookup (which is guaranteed to be hot) with the
// OpcodeOffset table.
unsigned MatcherIndex = 0;
-
+
if (!OpcodeOffset.empty()) {
// Already computed the OpcodeOffset table, just index into it.
if (N.getOpcode() < OpcodeOffset.size())
if (N.getOpcode() < OpcodeOffset.size())
MatcherIndex = OpcodeOffset[N.getOpcode()];
}
-
+
while (1) {
assert(MatcherIndex < TableSize && "Invalid index");
#ifndef NDEBUG
// determine immediately that the first check (or first several) will
// immediately fail, don't even bother pushing a scope for them.
unsigned FailIndex;
-
+
while (1) {
unsigned NumToSkip = MatcherTable[MatcherIndex++];
if (NumToSkip & 128)
FailIndex = 0;
break;
}
-
+
FailIndex = MatcherIndex+NumToSkip;
-
+
unsigned MatcherIndexOfPredicate = MatcherIndex;
(void)MatcherIndexOfPredicate; // silence warning.
-
+
// If we can't evaluate this predicate without pushing a scope (e.g. if
// it is a 'MoveParent') or if the predicate succeeds on this node, we
// push the scope and evaluate the full predicate chain.
Result, *this, RecordedNodes);
if (!Result)
break;
-
+
DEBUG(errs() << " Skipped scope entry (due to false predicate) at "
<< "index " << MatcherIndexOfPredicate
<< ", continuing at " << FailIndex << "\n");
++NumDAGIselRetries;
-
+
// Otherwise, we know that this case of the Scope is guaranteed to fail,
// move to the next case.
MatcherIndex = FailIndex;
}
-
+
// If the whole scope failed to match, bail.
if (FailIndex == 0) break;
-
+
// Push a MatchScope which indicates where to go if the first child fails
// to match.
MatchScope NewEntry;
NewEntry.NumRecordedNodes = RecordedNodes.size();
NewEntry.NumMatchedMemRefs = MatchedMemRefs.size();
NewEntry.InputChain = InputChain;
- NewEntry.InputFlag = InputFlag;
+ NewEntry.InputGlue = InputGlue;
NewEntry.HasChainNodesMatched = !ChainNodesMatched.empty();
- NewEntry.HasFlagResultNodesMatched = !FlagResultNodesMatched.empty();
+ NewEntry.HasGlueResultNodesMatched = !GlueResultNodesMatched.empty();
MatchScopes.push_back(NewEntry);
continue;
}
RecordedNodes.push_back(std::make_pair(N, Parent));
continue;
}
-
+
case OPC_RecordChild0: case OPC_RecordChild1:
case OPC_RecordChild2: case OPC_RecordChild3:
case OPC_RecordChild4: case OPC_RecordChild5:
case OPC_RecordMemRef:
MatchedMemRefs.push_back(cast<MemSDNode>(N)->getMemOperand());
continue;
-
- case OPC_CaptureFlagInput:
- // If the current node has an input flag, capture it in InputFlag.
+
+ case OPC_CaptureGlueInput:
+ // If the current node has an input glue, capture it in InputGlue.
if (N->getNumOperands() != 0 &&
- N->getOperand(N->getNumOperands()-1).getValueType() == MVT::Flag)
- InputFlag = N->getOperand(N->getNumOperands()-1);
+ N->getOperand(N->getNumOperands()-1).getValueType() == MVT::Glue)
+ InputGlue = N->getOperand(N->getNumOperands()-1);
continue;
-
+
case OPC_MoveChild: {
unsigned ChildNo = MatcherTable[MatcherIndex++];
if (ChildNo >= N.getNumOperands())
NodeStack.push_back(N);
continue;
}
-
+
case OPC_MoveParent:
// Pop the current node off the NodeStack.
NodeStack.pop_back();
assert(!NodeStack.empty() && "Node stack imbalance!");
- N = NodeStack.back();
+ N = NodeStack.back();
continue;
-
+
case OPC_CheckSame:
if (!::CheckSame(MatcherTable, MatcherIndex, N, RecordedNodes)) break;
continue;
case OPC_CheckOpcode:
if (!::CheckOpcode(MatcherTable, MatcherIndex, N.getNode())) break;
continue;
-
+
case OPC_CheckType:
if (!::CheckType(MatcherTable, MatcherIndex, N, TLI)) break;
continue;
-
+
case OPC_SwitchOpcode: {
unsigned CurNodeOpcode = N.getOpcode();
unsigned SwitchStart = MatcherIndex-1; (void)SwitchStart;
// If the opcode matches, then we will execute this case.
if (CurNodeOpcode == Opc)
break;
-
+
// Otherwise, skip over this case.
MatcherIndex += CaseSize;
}
-
+
// If no cases matched, bail out.
if (CaseSize == 0) break;
-
+
// Otherwise, execute the case we found.
DEBUG(errs() << " OpcodeSwitch from " << SwitchStart
<< " to " << MatcherIndex << "\n");
continue;
}
-
+
case OPC_SwitchType: {
MVT CurNodeVT = N.getValueType().getSimpleVT();
unsigned SwitchStart = MatcherIndex-1; (void)SwitchStart;
if (CaseSize & 128)
CaseSize = GetVBR(CaseSize, MatcherTable, MatcherIndex);
if (CaseSize == 0) break;
-
+
MVT CaseVT = (MVT::SimpleValueType)MatcherTable[MatcherIndex++];
if (CaseVT == MVT::iPTR)
CaseVT = TLI.getPointerTy();
-
+
// If the VT matches, then we will execute this case.
if (CurNodeVT == CaseVT)
break;
-
+
// Otherwise, skip over this case.
MatcherIndex += CaseSize;
}
-
+
// If no cases matched, bail out.
if (CaseSize == 0) break;
-
+
// Otherwise, execute the case we found.
DEBUG(errs() << " TypeSwitch[" << EVT(CurNodeVT).getEVTString()
<< "] from " << SwitchStart << " to " << MatcherIndex<<'\n');
case OPC_CheckOrImm:
if (!::CheckOrImm(MatcherTable, MatcherIndex, N, *this)) break;
continue;
-
+
case OPC_CheckFoldableChainNode: {
assert(NodeStack.size() != 1 && "No parent node");
// Verify that all intermediate nodes between the root and this one have
NodeToMatch, OptLevel,
true/*We validate our own chains*/))
break;
-
+
continue;
}
case OPC_EmitInteger: {
CurDAG->getRegister(RegNo, VT), (SDNode*)0));
continue;
}
-
+
case OPC_EmitConvertToTarget: {
// Convert from IMM/FPIMM to target version.
unsigned RecNo = MatcherTable[MatcherIndex++];
const ConstantFP *Val=cast<ConstantFPSDNode>(Imm)->getConstantFPValue();
Imm = CurDAG->getTargetConstantFP(*Val, Imm.getValueType());
}
-
+
RecordedNodes.push_back(std::make_pair(Imm, RecordedNodes[RecNo].second));
continue;
}
-
+
case OPC_EmitMergeInputChains1_0: // OPC_EmitMergeInputChains, 1, 0
case OPC_EmitMergeInputChains1_1: { // OPC_EmitMergeInputChains, 1, 1
// These are space-optimized forms of OPC_EmitMergeInputChains.
"EmitMergeInputChains should be the first chain producing node");
assert(ChainNodesMatched.empty() &&
"Should only have one EmitMergeInputChains per match");
-
+
// Read all of the chained nodes.
unsigned RecNo = Opcode == OPC_EmitMergeInputChains1_1;
assert(RecNo < RecordedNodes.size() && "Invalid CheckSame");
ChainNodesMatched.push_back(RecordedNodes[RecNo].first.getNode());
-
+
// FIXME: What if other value results of the node have uses not matched
// by this pattern?
if (ChainNodesMatched.back() != NodeToMatch &&
ChainNodesMatched.clear();
break;
}
-
+
// Merge the input chains if they are not intra-pattern references.
InputChain = HandleMergeInputChains(ChainNodesMatched, CurDAG);
-
+
if (InputChain.getNode() == 0)
break; // Failed to merge.
continue;
}
-
+
case OPC_EmitMergeInputChains: {
assert(InputChain.getNode() == 0 &&
"EmitMergeInputChains should be the first chain producing node");
unsigned RecNo = MatcherTable[MatcherIndex++];
assert(RecNo < RecordedNodes.size() && "Invalid CheckSame");
ChainNodesMatched.push_back(RecordedNodes[RecNo].first.getNode());
-
+
// FIXME: What if other value results of the node have uses not matched
// by this pattern?
if (ChainNodesMatched.back() != NodeToMatch &&
break;
}
}
-
+
// If the inner loop broke out, the match fails.
if (ChainNodesMatched.empty())
break;
// Merge the input chains if they are not intra-pattern references.
InputChain = HandleMergeInputChains(ChainNodesMatched, CurDAG);
-
+
if (InputChain.getNode() == 0)
break; // Failed to merge.
continue;
}
-
+
case OPC_EmitCopyToReg: {
unsigned RecNo = MatcherTable[MatcherIndex++];
assert(RecNo < RecordedNodes.size() && "Invalid CheckSame");
unsigned DestPhysReg = MatcherTable[MatcherIndex++];
-
+
if (InputChain.getNode() == 0)
InputChain = CurDAG->getEntryNode();
-
+
InputChain = CurDAG->getCopyToReg(InputChain, NodeToMatch->getDebugLoc(),
DestPhysReg, RecordedNodes[RecNo].first,
- InputFlag);
-
- InputFlag = InputChain.getValue(1);
+ InputGlue);
+
+ InputGlue = InputChain.getValue(1);
continue;
}
-
+
case OPC_EmitNodeXForm: {
unsigned XFormNo = MatcherTable[MatcherIndex++];
unsigned RecNo = MatcherTable[MatcherIndex++];
RecordedNodes.push_back(std::pair<SDValue,SDNode*>(Res, (SDNode*) 0));
continue;
}
-
+
case OPC_EmitNode:
case OPC_MorphNodeTo: {
uint16_t TargetOpc = MatcherTable[MatcherIndex++];
if (VT == MVT::iPTR) VT = TLI.getPointerTy().SimpleTy;
VTs.push_back(VT);
}
-
+
if (EmitNodeInfo & OPFL_Chain)
VTs.push_back(MVT::Other);
- if (EmitNodeInfo & OPFL_FlagOutput)
- VTs.push_back(MVT::Flag);
-
+ if (EmitNodeInfo & OPFL_GlueOutput)
+ VTs.push_back(MVT::Glue);
+
// This is hot code, so optimize the two most common cases of 1 and 2
// results.
SDVTList VTList;
unsigned RecNo = MatcherTable[MatcherIndex++];
if (RecNo & 128)
RecNo = GetVBR(RecNo, MatcherTable, MatcherIndex);
-
+
assert(RecNo < RecordedNodes.size() && "Invalid EmitNode");
Ops.push_back(RecordedNodes[RecNo].first);
}
-
+
// If there are variadic operands to add, handle them now.
if (EmitNodeInfo & OPFL_VariadicInfo) {
// Determine the start index to copy from.
FirstOpToCopy += (EmitNodeInfo & OPFL_Chain) ? 1 : 0;
assert(NodeToMatch->getNumOperands() >= FirstOpToCopy &&
"Invalid variadic node");
- // Copy all of the variadic operands, not including a potential flag
+ // Copy all of the variadic operands, not including a potential glue
// input.
for (unsigned i = FirstOpToCopy, e = NodeToMatch->getNumOperands();
i != e; ++i) {
SDValue V = NodeToMatch->getOperand(i);
- if (V.getValueType() == MVT::Flag) break;
+ if (V.getValueType() == MVT::Glue) break;
Ops.push_back(V);
}
}
-
- // If this has chain/flag inputs, add them.
+
+ // If this has chain/glue inputs, add them.
if (EmitNodeInfo & OPFL_Chain)
Ops.push_back(InputChain);
- if ((EmitNodeInfo & OPFL_FlagInput) && InputFlag.getNode() != 0)
- Ops.push_back(InputFlag);
-
+ if ((EmitNodeInfo & OPFL_GlueInput) && InputGlue.getNode() != 0)
+ Ops.push_back(InputGlue);
+
// Create the node.
SDNode *Res = 0;
if (Opcode != OPC_MorphNodeTo) {
// add the results to the RecordedNodes list.
Res = CurDAG->getMachineNode(TargetOpc, NodeToMatch->getDebugLoc(),
VTList, Ops.data(), Ops.size());
-
- // Add all the non-flag/non-chain results to the RecordedNodes list.
+
+ // Add all the non-glue/non-chain results to the RecordedNodes list.
for (unsigned i = 0, e = VTs.size(); i != e; ++i) {
- if (VTs[i] == MVT::Other || VTs[i] == MVT::Flag) break;
+ if (VTs[i] == MVT::Other || VTs[i] == MVT::Glue) break;
RecordedNodes.push_back(std::pair<SDValue,SDNode*>(SDValue(Res, i),
(SDNode*) 0));
}
-
+
} else {
Res = MorphNode(NodeToMatch, TargetOpc, VTList, Ops.data(), Ops.size(),
EmitNodeInfo);
}
-
- // If the node had chain/flag results, update our notion of the current
- // chain and flag.
- if (EmitNodeInfo & OPFL_FlagOutput) {
- InputFlag = SDValue(Res, VTs.size()-1);
+
+ // If the node had chain/glue results, update our notion of the current
+ // chain and glue.
+ if (EmitNodeInfo & OPFL_GlueOutput) {
+ InputGlue = SDValue(Res, VTs.size()-1);
if (EmitNodeInfo & OPFL_Chain)
InputChain = SDValue(Res, VTs.size()-2);
} else if (EmitNodeInfo & OPFL_Chain)
InputChain = SDValue(Res, VTs.size()-1);
- // If the OPFL_MemRefs flag is set on this node, slap all of the
+ // If the OPFL_MemRefs glue is set on this node, slap all of the
// accumulated memrefs onto it.
//
// FIXME: This is vastly incorrect for patterns with multiple outputs
cast<MachineSDNode>(Res)
->setMemRefs(MemRefs, MemRefs + MatchedMemRefs.size());
}
-
+
DEBUG(errs() << " "
<< (Opcode == OPC_MorphNodeTo ? "Morphed" : "Created")
<< " node: "; Res->dump(CurDAG); errs() << "\n");
-
+
// If this was a MorphNodeTo then we're completely done!
if (Opcode == OPC_MorphNodeTo) {
- // Update chain and flag uses.
- UpdateChainsAndFlags(NodeToMatch, InputChain, ChainNodesMatched,
- InputFlag, FlagResultNodesMatched, true);
+ // Update chain and glue uses.
+ UpdateChainsAndGlue(NodeToMatch, InputChain, ChainNodesMatched,
+ InputGlue, GlueResultNodesMatched, true);
return Res;
}
-
+
continue;
}
-
- case OPC_MarkFlagResults: {
+
+ case OPC_MarkGlueResults: {
unsigned NumNodes = MatcherTable[MatcherIndex++];
-
- // Read and remember all the flag-result nodes.
+
+ // Read and remember all the glue-result nodes.
for (unsigned i = 0; i != NumNodes; ++i) {
unsigned RecNo = MatcherTable[MatcherIndex++];
if (RecNo & 128)
RecNo = GetVBR(RecNo, MatcherTable, MatcherIndex);
assert(RecNo < RecordedNodes.size() && "Invalid CheckSame");
- FlagResultNodesMatched.push_back(RecordedNodes[RecNo].first.getNode());
+ GlueResultNodesMatched.push_back(RecordedNodes[RecNo].first.getNode());
}
continue;
}
-
+
case OPC_CompleteMatch: {
// The match has been completed, and any new nodes (if any) have been
// created. Patch up references to the matched dag to use the newly
unsigned ResSlot = MatcherTable[MatcherIndex++];
if (ResSlot & 128)
ResSlot = GetVBR(ResSlot, MatcherTable, MatcherIndex);
-
+
assert(ResSlot < RecordedNodes.size() && "Invalid CheckSame");
SDValue Res = RecordedNodes[ResSlot].first;
-
+
assert(i < NodeToMatch->getNumValues() &&
NodeToMatch->getValueType(i) != MVT::Other &&
- NodeToMatch->getValueType(i) != MVT::Flag &&
+ NodeToMatch->getValueType(i) != MVT::Glue &&
"Invalid number of results to complete!");
assert((NodeToMatch->getValueType(i) == Res.getValueType() ||
NodeToMatch->getValueType(i) == MVT::iPTR ||
CurDAG->ReplaceAllUsesOfValueWith(SDValue(NodeToMatch, i), Res);
}
- // If the root node defines a flag, add it to the flag nodes to update
- // list.
- if (NodeToMatch->getValueType(NodeToMatch->getNumValues()-1) == MVT::Flag)
- FlagResultNodesMatched.push_back(NodeToMatch);
-
- // Update chain and flag uses.
- UpdateChainsAndFlags(NodeToMatch, InputChain, ChainNodesMatched,
- InputFlag, FlagResultNodesMatched, false);
-
+ // If the root node defines glue, add it to the glue nodes to update list.
+ if (NodeToMatch->getValueType(NodeToMatch->getNumValues()-1) == MVT::Glue)
+ GlueResultNodesMatched.push_back(NodeToMatch);
+
+ // Update chain and glue uses.
+ UpdateChainsAndGlue(NodeToMatch, InputChain, ChainNodesMatched,
+ InputGlue, GlueResultNodesMatched, false);
+
assert(NodeToMatch->use_empty() &&
"Didn't replace all uses of the node?");
-
+
// FIXME: We just return here, which interacts correctly with SelectRoot
// above. We should fix this to not return an SDNode* anymore.
return 0;
}
}
-
+
// If the code reached this point, then the match failed. See if there is
// another child to try in the current 'Scope', otherwise pop it until we
// find a case to check.
if (LastScope.NumMatchedMemRefs != MatchedMemRefs.size())
MatchedMemRefs.resize(LastScope.NumMatchedMemRefs);
MatcherIndex = LastScope.FailIndex;
-
+
DEBUG(errs() << " Continuing at " << MatcherIndex << "\n");
-
+
InputChain = LastScope.InputChain;
- InputFlag = LastScope.InputFlag;
+ InputGlue = LastScope.InputGlue;
if (!LastScope.HasChainNodesMatched)
ChainNodesMatched.clear();
- if (!LastScope.HasFlagResultNodesMatched)
- FlagResultNodesMatched.clear();
+ if (!LastScope.HasGlueResultNodesMatched)
+ GlueResultNodesMatched.clear();
// Check to see what the offset is at the new MatcherIndex. If it is zero
// we have reached the end of this scope, otherwise we have another child
LastScope.FailIndex = MatcherIndex+NumToSkip;
break;
}
-
+
// End of this scope, pop it and try the next child in the containing
// scope.
MatchScopes.pop_back();
}
}
}
-
+
void SelectionDAGISel::CannotYetSelect(SDNode *N) {
std::string msg;
raw_string_ostream Msg(msg);
- Msg << "Cannot yet select: ";
-
+ Msg << "Cannot select: ";
+
if (N->getOpcode() != ISD::INTRINSIC_W_CHAIN &&
N->getOpcode() != ISD::INTRINSIC_WO_CHAIN &&
N->getOpcode() != ISD::INTRINSIC_VOID) {