#include "llvm/CodeGen/LiveIntervalAnalysis.h"
#include "llvm/CodeGen/MachineDominators.h"
#include "llvm/CodeGen/MachineInstrBuilder.h"
+#include "llvm/CodeGen/MachineLoopInfo.h"
#include "llvm/CodeGen/MachineRegisterInfo.h"
-#include "llvm/Support/CommandLine.h"
#include "llvm/Support/Debug.h"
#include "llvm/Support/raw_ostream.h"
#include "llvm/Target/TargetInstrInfo.h"
using namespace llvm;
-static cl::opt<bool>
-AllowSplit("spiller-splits-edges",
- cl::desc("Allow critical edge splitting during spilling"));
-
STATISTIC(NumFinished, "Number of splits finished");
STATISTIC(NumSimple, "Number of splits that were simple");
+STATISTIC(NumCopies, "Number of copies inserted for splitting");
+STATISTIC(NumRemats, "Number of rematerialized defs for splitting");
+STATISTIC(NumRepairs, "Number of invalid live ranges repaired");
//===----------------------------------------------------------------------===//
// Split Analysis
LIS(lis),
Loops(mli),
TII(*MF.getTarget().getInstrInfo()),
- CurLI(0) {}
+ CurLI(0),
+ LastSplitPoint(MF.getNumBlockIDs()) {}
void SplitAnalysis::clear() {
UseSlots.clear();
- UsingInstrs.clear();
- UsingBlocks.clear();
- LiveBlocks.clear();
+ UseBlocks.clear();
+ ThroughBlocks.clear();
CurLI = 0;
+ DidRepairRange = false;
}
-bool SplitAnalysis::canAnalyzeBranch(const MachineBasicBlock *MBB) {
- MachineBasicBlock *T, *F;
- SmallVector<MachineOperand, 4> Cond;
- return !TII.AnalyzeBranch(const_cast<MachineBasicBlock&>(*MBB), T, F, Cond);
+SlotIndex SplitAnalysis::computeLastSplitPoint(unsigned Num) {
+ const MachineBasicBlock *MBB = MF.getBlockNumbered(Num);
+ const MachineBasicBlock *LPad = MBB->getLandingPadSuccessor();
+ std::pair<SlotIndex, SlotIndex> &LSP = LastSplitPoint[Num];
+
+ // Compute split points on the first call. The pair is independent of the
+ // current live interval.
+ if (!LSP.first.isValid()) {
+ MachineBasicBlock::const_iterator FirstTerm = MBB->getFirstTerminator();
+ if (FirstTerm == MBB->end())
+ LSP.first = LIS.getMBBEndIdx(MBB);
+ else
+ LSP.first = LIS.getInstructionIndex(FirstTerm);
+
+ // If there is a landing pad successor, also find the call instruction.
+ if (!LPad)
+ return LSP.first;
+ // There may not be a call instruction (?) in which case we ignore LPad.
+ LSP.second = LSP.first;
+ for (MachineBasicBlock::const_iterator I = MBB->end(), E = MBB->begin();
+ I != E;) {
+ --I;
+ if (I->isCall()) {
+ LSP.second = LIS.getInstructionIndex(I);
+ break;
+ }
+ }
+ }
+
+ // If CurLI is live into a landing pad successor, move the last split point
+ // back to the call that may throw.
+ if (LPad && LSP.second.isValid() && LIS.isLiveInToMBB(*CurLI, LPad))
+ return LSP.second;
+ else
+ return LSP.first;
}
/// analyzeUses - Count instructions, basic blocks, and loops using CurLI.
void SplitAnalysis::analyzeUses() {
+ assert(UseSlots.empty() && "Call clear first");
+
+ // First get all the defs from the interval values. This provides the correct
+ // slots for early clobbers.
+ for (LiveInterval::const_vni_iterator I = CurLI->vni_begin(),
+ E = CurLI->vni_end(); I != E; ++I)
+ if (!(*I)->isPHIDef() && !(*I)->isUnused())
+ UseSlots.push_back((*I)->def);
+
+ // Get use slots form the use-def chain.
const MachineRegisterInfo &MRI = MF.getRegInfo();
- for (MachineRegisterInfo::reg_iterator I = MRI.reg_begin(CurLI->reg),
- E = MRI.reg_end(); I != E; ++I) {
- MachineOperand &MO = I.getOperand();
- if (MO.isUse() && MO.isUndef())
- continue;
- MachineInstr *MI = MO.getParent();
- if (MI->isDebugValue() || !UsingInstrs.insert(MI))
- continue;
- UseSlots.push_back(LIS.getInstructionIndex(MI).getDefIndex());
- MachineBasicBlock *MBB = MI->getParent();
- UsingBlocks[MBB]++;
- }
+ for (MachineRegisterInfo::use_nodbg_iterator
+ I = MRI.use_nodbg_begin(CurLI->reg), E = MRI.use_nodbg_end(); I != E;
+ ++I)
+ if (!I.getOperand().isUndef())
+ UseSlots.push_back(LIS.getInstructionIndex(&*I).getRegSlot());
+
array_pod_sort(UseSlots.begin(), UseSlots.end());
+ // Remove duplicates, keeping the smaller slot for each instruction.
+ // That is what we want for early clobbers.
+ UseSlots.erase(std::unique(UseSlots.begin(), UseSlots.end(),
+ SlotIndex::isSameInstr),
+ UseSlots.end());
+
// Compute per-live block info.
if (!calcLiveBlockInfo()) {
// FIXME: calcLiveBlockInfo found inconsistencies in the live range.
- // I am looking at you, SimpleRegisterCoalescing!
+ // I am looking at you, RegisterCoalescer!
+ DidRepairRange = true;
+ ++NumRepairs;
DEBUG(dbgs() << "*** Fixing inconsistent live interval! ***\n");
const_cast<LiveIntervals&>(LIS)
.shrinkToUses(const_cast<LiveInterval*>(CurLI));
- LiveBlocks.clear();
+ UseBlocks.clear();
+ ThroughBlocks.clear();
bool fixed = calcLiveBlockInfo();
(void)fixed;
assert(fixed && "Couldn't fix broken live interval");
}
DEBUG(dbgs() << "Analyze counted "
- << UsingInstrs.size() << " instrs, "
- << UsingBlocks.size() << " blocks, "
- << LiveBlocks.size() << " spanned.\n");
+ << UseSlots.size() << " instrs in "
+ << UseBlocks.size() << " blocks, through "
+ << NumThroughBlocks << " blocks.\n");
}
/// calcLiveBlockInfo - Fill the LiveBlocks array with information about blocks
/// where CurLI is live.
bool SplitAnalysis::calcLiveBlockInfo() {
+ ThroughBlocks.resize(MF.getNumBlockIDs());
+ NumThroughBlocks = NumGapBlocks = 0;
if (CurLI->empty())
return true;
SlotIndex Start, Stop;
tie(Start, Stop) = LIS.getSlotIndexes()->getMBBRange(BI.MBB);
- // The last split point is the latest possible insertion point that dominates
- // all successor blocks. If interference reaches LastSplitPoint, it is not
- // possible to insert a split or reload that makes CurLI live in the
- // outgoing bundle.
- MachineBasicBlock::iterator LSP = LIS.getLastSplitPoint(*CurLI, BI.MBB);
- if (LSP == BI.MBB->end())
- BI.LastSplitPoint = Stop;
- else
- BI.LastSplitPoint = LIS.getInstructionIndex(LSP);
-
- // LVI is the first live segment overlapping MBB.
- BI.LiveIn = LVI->start <= Start;
- if (!BI.LiveIn)
- BI.Def = LVI->start;
-
- // Find the first and last uses in the block.
- BI.Uses = hasUses(MFI);
- if (BI.Uses && UseI != UseE) {
- BI.FirstUse = *UseI;
- assert(BI.FirstUse >= Start);
+ // If the block contains no uses, the range must be live through. At one
+ // point, RegisterCoalescer could create dangling ranges that ended
+ // mid-block.
+ if (UseI == UseE || *UseI >= Stop) {
+ ++NumThroughBlocks;
+ ThroughBlocks.set(BI.MBB->getNumber());
+ // The range shouldn't end mid-block if there are no uses. This shouldn't
+ // happen.
+ if (LVI->end < Stop)
+ return false;
+ } else {
+ // This block has uses. Find the first and last uses in the block.
+ BI.FirstInstr = *UseI;
+ assert(BI.FirstInstr >= Start);
do ++UseI;
while (UseI != UseE && *UseI < Stop);
- BI.LastUse = UseI[-1];
- assert(BI.LastUse < Stop);
- }
+ BI.LastInstr = UseI[-1];
+ assert(BI.LastInstr < Stop);
- // Look for gaps in the live range.
- bool hasGap = false;
- BI.LiveOut = true;
- while (LVI->end < Stop) {
- SlotIndex LastStop = LVI->end;
- if (++LVI == LVE || LVI->start >= Stop) {
- BI.Kill = LastStop;
- BI.LiveOut = false;
- break;
- }
- if (LastStop < LVI->start) {
- hasGap = true;
- BI.Kill = LastStop;
- BI.Def = LVI->start;
+ // LVI is the first live segment overlapping MBB.
+ BI.LiveIn = LVI->start <= Start;
+
+ // When not live in, the first use should be a def.
+ if (!BI.LiveIn) {
+ assert(LVI->start == LVI->valno->def && "Dangling LiveRange start");
+ assert(LVI->start == BI.FirstInstr && "First instr should be a def");
+ BI.FirstDef = BI.FirstInstr;
}
- }
- // Don't set LiveThrough when the block has a gap.
- BI.LiveThrough = !hasGap && BI.LiveIn && BI.LiveOut;
- LiveBlocks.push_back(BI);
+ // Look for gaps in the live range.
+ BI.LiveOut = true;
+ while (LVI->end < Stop) {
+ SlotIndex LastStop = LVI->end;
+ if (++LVI == LVE || LVI->start >= Stop) {
+ BI.LiveOut = false;
+ BI.LastInstr = LastStop;
+ break;
+ }
- // FIXME: This should never happen. The live range stops or starts without a
- // corresponding use. An earlier pass did something wrong.
- if (!BI.LiveThrough && !BI.Uses)
- return false;
+ if (LastStop < LVI->start) {
+ // There is a gap in the live range. Create duplicate entries for the
+ // live-in snippet and the live-out snippet.
+ ++NumGapBlocks;
- // LVI is now at LVE or LVI->end >= Stop.
- if (LVI == LVE)
- break;
+ // Push the Live-in part.
+ BI.LiveOut = false;
+ UseBlocks.push_back(BI);
+ UseBlocks.back().LastInstr = LastStop;
+
+ // Set up BI for the live-out part.
+ BI.LiveIn = false;
+ BI.LiveOut = true;
+ BI.FirstInstr = BI.FirstDef = LVI->start;
+ }
+
+ // A LiveRange that starts in the middle of the block must be a def.
+ assert(LVI->start == LVI->valno->def && "Dangling LiveRange start");
+ if (!BI.FirstDef)
+ BI.FirstDef = LVI->start;
+ }
+
+ UseBlocks.push_back(BI);
+
+ // LVI is now at LVE or LVI->end >= Stop.
+ if (LVI == LVE)
+ break;
+ }
// Live segment ends exactly at Stop. Move to the next segment.
if (LVI->end == Stop && ++LVI == LVE)
else
MFI = LIS.getMBBFromIndex(LVI->start);
}
+
+ assert(getNumLiveBlocks() == countLiveBlocks(CurLI) && "Bad block count");
return true;
}
+unsigned SplitAnalysis::countLiveBlocks(const LiveInterval *cli) const {
+ if (cli->empty())
+ return 0;
+ LiveInterval *li = const_cast<LiveInterval*>(cli);
+ LiveInterval::iterator LVI = li->begin();
+ LiveInterval::iterator LVE = li->end();
+ unsigned Count = 0;
+
+ // Loop over basic blocks where li is live.
+ MachineFunction::const_iterator MFI = LIS.getMBBFromIndex(LVI->start);
+ SlotIndex Stop = LIS.getMBBEndIdx(MFI);
+ for (;;) {
+ ++Count;
+ LVI = li->advanceTo(LVI, Stop);
+ if (LVI == LVE)
+ return Count;
+ do {
+ ++MFI;
+ Stop = LIS.getMBBEndIdx(MFI);
+ } while (Stop <= LVI->start);
+ }
+}
+
bool SplitAnalysis::isOriginalEndpoint(SlotIndex Idx) const {
unsigned OrigReg = VRM.getOriginal(CurLI->reg);
const LiveInterval &Orig = LIS.getInterval(OrigReg);
return I != Orig.begin() && (--I)->end == Idx;
}
-void SplitAnalysis::print(const BlockPtrSet &B, raw_ostream &OS) const {
- for (BlockPtrSet::const_iterator I = B.begin(), E = B.end(); I != E; ++I) {
- unsigned count = UsingBlocks.lookup(*I);
- OS << " BB#" << (*I)->getNumber();
- if (count)
- OS << '(' << count << ')';
- }
-}
-
void SplitAnalysis::analyze(const LiveInterval *li) {
clear();
CurLI = li;
TRI(*vrm.getMachineFunction().getTarget().getRegisterInfo()),
Edit(0),
OpenIdx(0),
+ SpillMode(SM_Partition),
RegAssign(Allocator)
{}
-void SplitEditor::reset(LiveRangeEdit &lre) {
- Edit = &lre;
+void SplitEditor::reset(LiveRangeEdit &LRE, ComplementSpillMode SM) {
+ Edit = &LRE;
+ SpillMode = SM;
OpenIdx = 0;
RegAssign.clear();
Values.clear();
- // We don't need to clear LiveOutCache, only LiveOutSeen entries are read.
- LiveOutSeen.clear();
+ // Reset the LiveRangeCalc instances needed for this spill mode.
+ LRCalc[0].reset(&VRM.getMachineFunction());
+ if (SpillMode)
+ LRCalc[1].reset(&VRM.getMachineFunction());
// We don't need an AliasAnalysis since we will only be performing
// cheap-as-a-copy remats anyway.
// Use insert for lookup, so we can add missing values with a second lookup.
std::pair<ValueMap::iterator, bool> InsP =
- Values.insert(std::make_pair(std::make_pair(RegIdx, ParentVNI->id), VNI));
+ Values.insert(std::make_pair(std::make_pair(RegIdx, ParentVNI->id),
+ ValueForcePair(VNI, false)));
// This was the first time (RegIdx, ParentVNI) was mapped.
// Keep it as a simple def without any liveness.
return VNI;
// If the previous value was a simple mapping, add liveness for it now.
- if (VNInfo *OldVNI = InsP.first->second) {
+ if (VNInfo *OldVNI = InsP.first->second.getPointer()) {
SlotIndex Def = OldVNI->def;
- LI->addRange(LiveRange(Def, Def.getNextSlot(), OldVNI));
- // No longer a simple mapping.
- InsP.first->second = 0;
+ LI->addRange(LiveRange(Def, Def.getDeadSlot(), OldVNI));
+ // No longer a simple mapping. Switch to a complex, non-forced mapping.
+ InsP.first->second = ValueForcePair();
}
// This is a complex mapping, add liveness for VNI
SlotIndex Def = VNI->def;
- LI->addRange(LiveRange(Def, Def.getNextSlot(), VNI));
+ LI->addRange(LiveRange(Def, Def.getDeadSlot(), VNI));
return VNI;
}
-void SplitEditor::markComplexMapped(unsigned RegIdx, const VNInfo *ParentVNI) {
+void SplitEditor::forceRecompute(unsigned RegIdx, const VNInfo *ParentVNI) {
assert(ParentVNI && "Mapping NULL value");
- VNInfo *&VNI = Values[std::make_pair(RegIdx, ParentVNI->id)];
+ ValueForcePair &VFP = Values[std::make_pair(RegIdx, ParentVNI->id)];
+ VNInfo *VNI = VFP.getPointer();
- // ParentVNI was either unmapped or already complex mapped. Either way.
- if (!VNI)
+ // ParentVNI was either unmapped or already complex mapped. Either way, just
+ // set the force bit.
+ if (!VNI) {
+ VFP.setInt(true);
return;
+ }
// This was previously a single mapping. Make sure the old def is represented
// by a trivial live range.
SlotIndex Def = VNI->def;
- Edit->get(RegIdx)->addRange(LiveRange(Def, Def.getNextSlot(), VNI));
- VNI = 0;
-}
-
-// extendRange - Extend the live range to reach Idx.
-// Potentially create phi-def values.
-void SplitEditor::extendRange(unsigned RegIdx, SlotIndex Idx) {
- assert(Idx.isValid() && "Invalid SlotIndex");
- MachineBasicBlock *IdxMBB = LIS.getMBBFromIndex(Idx);
- assert(IdxMBB && "No MBB at Idx");
- LiveInterval *LI = Edit->get(RegIdx);
-
- // Is there a def in the same MBB we can extend?
- if (LI->extendInBlock(LIS.getMBBStartIdx(IdxMBB), Idx))
- return;
-
- // Now for the fun part. We know that ParentVNI potentially has multiple defs,
- // and we may need to create even more phi-defs to preserve VNInfo SSA form.
- // Perform a search for all predecessor blocks where we know the dominating
- // VNInfo. Insert phi-def VNInfos along the path back to IdxMBB.
-
- // Initialize the live-out cache the first time it is needed.
- if (LiveOutSeen.empty()) {
- unsigned N = VRM.getMachineFunction().getNumBlockIDs();
- LiveOutSeen.resize(N);
- LiveOutCache.resize(N);
- }
-
- // Blocks where LI should be live-in.
- SmallVector<MachineDomTreeNode*, 16> LiveIn;
- LiveIn.push_back(MDT[IdxMBB]);
-
- // Remember if we have seen more than one value.
- bool UniqueVNI = true;
- VNInfo *IdxVNI = 0;
-
- // Using LiveOutCache as a visited set, perform a BFS for all reaching defs.
- for (unsigned i = 0; i != LiveIn.size(); ++i) {
- MachineBasicBlock *MBB = LiveIn[i]->getBlock();
- assert(!MBB->pred_empty() && "Value live-in to entry block?");
- for (MachineBasicBlock::pred_iterator PI = MBB->pred_begin(),
- PE = MBB->pred_end(); PI != PE; ++PI) {
- MachineBasicBlock *Pred = *PI;
- LiveOutPair &LOP = LiveOutCache[Pred];
-
- // Is this a known live-out block?
- if (LiveOutSeen.test(Pred->getNumber())) {
- if (VNInfo *VNI = LOP.first) {
- if (IdxVNI && IdxVNI != VNI)
- UniqueVNI = false;
- IdxVNI = VNI;
- }
- continue;
- }
-
- // First time. LOP is garbage and must be cleared below.
- LiveOutSeen.set(Pred->getNumber());
-
- // Does Pred provide a live-out value?
- SlotIndex Start, Last;
- tie(Start, Last) = LIS.getSlotIndexes()->getMBBRange(Pred);
- Last = Last.getPrevSlot();
- VNInfo *VNI = LI->extendInBlock(Start, Last);
- LOP.first = VNI;
- if (VNI) {
- LOP.second = MDT[LIS.getMBBFromIndex(VNI->def)];
- if (IdxVNI && IdxVNI != VNI)
- UniqueVNI = false;
- IdxVNI = VNI;
- continue;
- }
- LOP.second = 0;
-
- // No, we need a live-in value for Pred as well
- if (Pred != IdxMBB)
- LiveIn.push_back(MDT[Pred]);
- else
- UniqueVNI = false; // Loopback to IdxMBB, ask updateSSA() for help.
- }
- }
-
- // We may need to add phi-def values to preserve the SSA form.
- if (UniqueVNI) {
- LiveOutPair LOP(IdxVNI, MDT[LIS.getMBBFromIndex(IdxVNI->def)]);
- // Update LiveOutCache, but skip IdxMBB at LiveIn[0].
- for (unsigned i = 1, e = LiveIn.size(); i != e; ++i)
- LiveOutCache[LiveIn[i]->getBlock()] = LOP;
- } else
- IdxVNI = updateSSA(RegIdx, LiveIn, Idx, IdxMBB);
-
- // Since we went through the trouble of a full BFS visiting all reaching defs,
- // the values in LiveIn are now accurate. No more phi-defs are needed
- // for these blocks, so we can color the live ranges.
- for (unsigned i = 0, e = LiveIn.size(); i != e; ++i) {
- MachineBasicBlock *MBB = LiveIn[i]->getBlock();
- SlotIndex Start = LIS.getMBBStartIdx(MBB);
- VNInfo *VNI = LiveOutCache[MBB].first;
-
- // Anything in LiveIn other than IdxMBB is live-through.
- // In IdxMBB, we should stop at Idx unless the same value is live-out.
- if (MBB == IdxMBB && IdxVNI != VNI)
- LI->addRange(LiveRange(Start, Idx.getNextSlot(), IdxVNI));
- else
- LI->addRange(LiveRange(Start, LIS.getMBBEndIdx(MBB), VNI));
- }
-}
-
-VNInfo *SplitEditor::updateSSA(unsigned RegIdx,
- SmallVectorImpl<MachineDomTreeNode*> &LiveIn,
- SlotIndex Idx,
- const MachineBasicBlock *IdxMBB) {
- // This is essentially the same iterative algorithm that SSAUpdater uses,
- // except we already have a dominator tree, so we don't have to recompute it.
- LiveInterval *LI = Edit->get(RegIdx);
- VNInfo *IdxVNI = 0;
- unsigned Changes;
- do {
- Changes = 0;
- // Propagate live-out values down the dominator tree, inserting phi-defs
- // when necessary. Since LiveIn was created by a BFS, going backwards makes
- // it more likely for us to visit immediate dominators before their
- // children.
- for (unsigned i = LiveIn.size(); i; --i) {
- MachineDomTreeNode *Node = LiveIn[i-1];
- MachineBasicBlock *MBB = Node->getBlock();
- MachineDomTreeNode *IDom = Node->getIDom();
- LiveOutPair IDomValue;
-
- // We need a live-in value to a block with no immediate dominator?
- // This is probably an unreachable block that has survived somehow.
- bool needPHI = !IDom || !LiveOutSeen.test(IDom->getBlock()->getNumber());
-
- // IDom dominates all of our predecessors, but it may not be the immediate
- // dominator. Check if any of them have live-out values that are properly
- // dominated by IDom. If so, we need a phi-def here.
- if (!needPHI) {
- IDomValue = LiveOutCache[IDom->getBlock()];
- for (MachineBasicBlock::pred_iterator PI = MBB->pred_begin(),
- PE = MBB->pred_end(); PI != PE; ++PI) {
- LiveOutPair Value = LiveOutCache[*PI];
- if (!Value.first || Value.first == IDomValue.first)
- continue;
- // This predecessor is carrying something other than IDomValue.
- // It could be because IDomValue hasn't propagated yet, or it could be
- // because MBB is in the dominance frontier of that value.
- if (MDT.dominates(IDom, Value.second)) {
- needPHI = true;
- break;
- }
- }
- }
-
- // Create a phi-def if required.
- if (needPHI) {
- ++Changes;
- SlotIndex Start = LIS.getMBBStartIdx(MBB);
- VNInfo *VNI = LI->getNextValue(Start, 0, LIS.getVNInfoAllocator());
- VNI->setIsPHIDef(true);
- // We no longer need LI to be live-in.
- LiveIn.erase(LiveIn.begin()+(i-1));
- // Blocks in LiveIn are either IdxMBB, or have a value live-through.
- if (MBB == IdxMBB)
- IdxVNI = VNI;
- // Check if we need to update live-out info.
- LiveOutPair &LOP = LiveOutCache[MBB];
- if (LOP.second == Node || !LiveOutSeen.test(MBB->getNumber())) {
- // We already have a live-out defined in MBB, so this must be IdxMBB.
- assert(MBB == IdxMBB && "Adding phi-def to known live-out");
- LI->addRange(LiveRange(Start, Idx.getNextSlot(), VNI));
- } else {
- // This phi-def is also live-out, so color the whole block.
- LI->addRange(LiveRange(Start, LIS.getMBBEndIdx(MBB), VNI));
- LOP = LiveOutPair(VNI, Node);
- }
- } else if (IDomValue.first) {
- // No phi-def here. Remember incoming value for IdxMBB.
- if (MBB == IdxMBB) {
- IdxVNI = IDomValue.first;
- // IdxMBB need not be live-out.
- if (!LiveOutSeen.test(MBB->getNumber()))
- continue;
- }
- assert(LiveOutSeen.test(MBB->getNumber()) && "Expected live-out block");
- // Propagate IDomValue if needed:
- // MBB is live-out and doesn't define its own value.
- LiveOutPair &LOP = LiveOutCache[MBB];
- if (LOP.second != Node && LOP.first != IDomValue.first) {
- ++Changes;
- LOP = IDomValue;
- }
- }
- }
- } while (Changes);
-
- assert(IdxVNI && "Didn't find value for Idx");
- return IdxVNI;
+ Edit->get(RegIdx)->addRange(LiveRange(Def, Def.getDeadSlot(), VNI));
+ // Mark as complex mapped, forced.
+ VFP = ValueForcePair(0, true);
}
VNInfo *SplitEditor::defFromParent(unsigned RegIdx,
SlotIndex Def;
LiveInterval *LI = Edit->get(RegIdx);
+ // We may be trying to avoid interference that ends at a deleted instruction,
+ // so always begin RegIdx 0 early and all others late.
+ bool Late = RegIdx != 0;
+
// Attempt cheap-as-a-copy rematerialization.
LiveRangeEdit::Remat RM(ParentVNI);
if (Edit->canRematerializeAt(RM, UseIdx, true, LIS)) {
- Def = Edit->rematerializeAt(MBB, I, LI->reg, RM, LIS, TII, TRI);
+ Def = Edit->rematerializeAt(MBB, I, LI->reg, RM, LIS, TII, TRI, Late);
+ ++NumRemats;
} else {
// Can't remat, just insert a copy from parent.
CopyMI = BuildMI(MBB, I, DebugLoc(), TII.get(TargetOpcode::COPY), LI->reg)
.addReg(Edit->getReg());
- Def = LIS.InsertMachineInstrInMaps(CopyMI).getDefIndex();
+ Def = LIS.getSlotIndexes()->insertMachineInstrInMaps(CopyMI, Late)
+ .getRegSlot();
+ ++NumCopies;
}
// Define the value in Reg.
}
/// Create a new virtual register and live interval.
-void SplitEditor::openIntv() {
- assert(!OpenIdx && "Previous LI not closed before openIntv");
-
+unsigned SplitEditor::openIntv() {
// Create the complement as index 0.
if (Edit->empty())
Edit->create(LIS, VRM);
// Create the open interval.
OpenIdx = Edit->size();
Edit->create(LIS, VRM);
+ return OpenIdx;
+}
+
+void SplitEditor::selectIntv(unsigned Idx) {
+ assert(Idx != 0 && "Cannot select the complement interval");
+ assert(Idx < Edit->size() && "Can only select previously opened interval");
+ DEBUG(dbgs() << " selectIntv " << OpenIdx << " -> " << Idx << '\n');
+ OpenIdx = Idx;
}
SlotIndex SplitEditor::enterIntvBefore(SlotIndex Idx) {
return VNI->def;
}
+SlotIndex SplitEditor::enterIntvAfter(SlotIndex Idx) {
+ assert(OpenIdx && "openIntv not called before enterIntvAfter");
+ DEBUG(dbgs() << " enterIntvAfter " << Idx);
+ Idx = Idx.getBoundaryIndex();
+ VNInfo *ParentVNI = Edit->getParent().getVNInfoAt(Idx);
+ if (!ParentVNI) {
+ DEBUG(dbgs() << ": not live\n");
+ return Idx;
+ }
+ DEBUG(dbgs() << ": valno " << ParentVNI->id << '\n');
+ MachineInstr *MI = LIS.getInstructionFromIndex(Idx);
+ assert(MI && "enterIntvAfter called with invalid index");
+
+ VNInfo *VNI = defFromParent(OpenIdx, ParentVNI, Idx, *MI->getParent(),
+ llvm::next(MachineBasicBlock::iterator(MI)));
+ return VNI->def;
+}
+
SlotIndex SplitEditor::enterIntvAtEnd(MachineBasicBlock &MBB) {
assert(OpenIdx && "openIntv not called before enterIntvAtEnd");
SlotIndex End = LIS.getMBBEndIdx(&MBB);
DEBUG(dbgs() << " leaveIntvAfter " << Idx);
// The interval must be live beyond the instruction at Idx.
- Idx = Idx.getBoundaryIndex();
- VNInfo *ParentVNI = Edit->getParent().getVNInfoAt(Idx);
+ SlotIndex Boundary = Idx.getBoundaryIndex();
+ VNInfo *ParentVNI = Edit->getParent().getVNInfoAt(Boundary);
if (!ParentVNI) {
DEBUG(dbgs() << ": not live\n");
- return Idx.getNextSlot();
+ return Boundary.getNextSlot();
}
DEBUG(dbgs() << ": valno " << ParentVNI->id << '\n');
-
- MachineInstr *MI = LIS.getInstructionFromIndex(Idx);
+ MachineInstr *MI = LIS.getInstructionFromIndex(Boundary);
assert(MI && "No instruction at index");
- VNInfo *VNI = defFromParent(0, ParentVNI, Idx, *MI->getParent(),
+
+ // In spill mode, make live ranges as short as possible by inserting the copy
+ // before MI. This is only possible if that instruction doesn't redefine the
+ // value. The inserted COPY is not a kill, and we don't need to recompute
+ // the source live range. The spiller also won't try to hoist this copy.
+ if (SpillMode && !SlotIndex::isSameInstr(ParentVNI->def, Idx) &&
+ MI->readsVirtualRegister(Edit->getReg())) {
+ forceRecompute(0, ParentVNI);
+ defFromParent(0, ParentVNI, Idx, *MI->getParent(), MI);
+ return Idx;
+ }
+
+ VNInfo *VNI = defFromParent(0, ParentVNI, Boundary, *MI->getParent(),
llvm::next(MachineBasicBlock::iterator(MI)));
return VNI->def;
}
DEBUG(dbgs() << " leaveIntvBefore " << Idx);
// The interval must be live into the instruction at Idx.
- Idx = Idx.getBoundaryIndex();
+ Idx = Idx.getBaseIndex();
VNInfo *ParentVNI = Edit->getParent().getVNInfoAt(Idx);
if (!ParentVNI) {
DEBUG(dbgs() << ": not live\n");
void SplitEditor::overlapIntv(SlotIndex Start, SlotIndex End) {
assert(OpenIdx && "openIntv not called before overlapIntv");
const VNInfo *ParentVNI = Edit->getParent().getVNInfoAt(Start);
- assert(ParentVNI == Edit->getParent().getVNInfoAt(End.getPrevSlot()) &&
+ assert(ParentVNI == Edit->getParent().getVNInfoBefore(End) &&
"Parent changes value in extended range");
assert(LIS.getMBBFromIndex(Start) == LIS.getMBBFromIndex(End) &&
"Range cannot span basic blocks");
- // The complement interval will be extended as needed by extendRange().
- markComplexMapped(0, ParentVNI);
+ // The complement interval will be extended as needed by LRCalc.extend().
+ if (ParentVNI)
+ forceRecompute(0, ParentVNI);
DEBUG(dbgs() << " overlapIntv [" << Start << ';' << End << "):");
RegAssign.insert(Start, End, OpenIdx);
DEBUG(dump());
}
-/// closeIntv - Indicate that we are done editing the currently open
-/// LiveInterval, and ranges can be trimmed.
-void SplitEditor::closeIntv() {
- assert(OpenIdx && "openIntv not called before closeIntv");
- OpenIdx = 0;
+//===----------------------------------------------------------------------===//
+// Spill modes
+//===----------------------------------------------------------------------===//
+
+void SplitEditor::removeBackCopies(SmallVectorImpl<VNInfo*> &Copies) {
+ LiveInterval *LI = Edit->get(0);
+ DEBUG(dbgs() << "Removing " << Copies.size() << " back-copies.\n");
+ RegAssignMap::iterator AssignI;
+ AssignI.setMap(RegAssign);
+
+ for (unsigned i = 0, e = Copies.size(); i != e; ++i) {
+ VNInfo *VNI = Copies[i];
+ SlotIndex Def = VNI->def;
+ MachineInstr *MI = LIS.getInstructionFromIndex(Def);
+ assert(MI && "No instruction for back-copy");
+
+ MachineBasicBlock *MBB = MI->getParent();
+ MachineBasicBlock::iterator MBBI(MI);
+ bool AtBegin;
+ do AtBegin = MBBI == MBB->begin();
+ while (!AtBegin && (--MBBI)->isDebugValue());
+
+ DEBUG(dbgs() << "Removing " << Def << '\t' << *MI);
+ LI->removeValNo(VNI);
+ LIS.RemoveMachineInstrFromMaps(MI);
+ MI->eraseFromParent();
+
+ // Adjust RegAssign if a register assignment is killed at VNI->def. We
+ // want to avoid calculating the live range of the source register if
+ // possible.
+ AssignI.find(VNI->def.getPrevSlot());
+ if (!AssignI.valid() || AssignI.start() >= Def)
+ continue;
+ // If MI doesn't kill the assigned register, just leave it.
+ if (AssignI.stop() != Def)
+ continue;
+ unsigned RegIdx = AssignI.value();
+ if (AtBegin || !MBBI->readsVirtualRegister(Edit->getReg())) {
+ DEBUG(dbgs() << " cannot find simple kill of RegIdx " << RegIdx << '\n');
+ forceRecompute(RegIdx, Edit->getParent().getVNInfoAt(Def));
+ } else {
+ SlotIndex Kill = LIS.getInstructionIndex(MBBI).getRegSlot();
+ DEBUG(dbgs() << " move kill to " << Kill << '\t' << *MBBI);
+ AssignI.setStop(Kill);
+ }
+ }
}
-/// transferSimpleValues - Transfer all simply defined values to the new live
-/// ranges.
-/// Values that were rematerialized or that have multiple defs are left alone.
-bool SplitEditor::transferSimpleValues() {
+MachineBasicBlock*
+SplitEditor::findShallowDominator(MachineBasicBlock *MBB,
+ MachineBasicBlock *DefMBB) {
+ if (MBB == DefMBB)
+ return MBB;
+ assert(MDT.dominates(DefMBB, MBB) && "MBB must be dominated by the def.");
+
+ const MachineLoopInfo &Loops = SA.Loops;
+ const MachineLoop *DefLoop = Loops.getLoopFor(DefMBB);
+ MachineDomTreeNode *DefDomNode = MDT[DefMBB];
+
+ // Best candidate so far.
+ MachineBasicBlock *BestMBB = MBB;
+ unsigned BestDepth = UINT_MAX;
+
+ for (;;) {
+ const MachineLoop *Loop = Loops.getLoopFor(MBB);
+
+ // MBB isn't in a loop, it doesn't get any better. All dominators have a
+ // higher frequency by definition.
+ if (!Loop) {
+ DEBUG(dbgs() << "Def in BB#" << DefMBB->getNumber() << " dominates BB#"
+ << MBB->getNumber() << " at depth 0\n");
+ return MBB;
+ }
+
+ // We'll never be able to exit the DefLoop.
+ if (Loop == DefLoop) {
+ DEBUG(dbgs() << "Def in BB#" << DefMBB->getNumber() << " dominates BB#"
+ << MBB->getNumber() << " in the same loop\n");
+ return MBB;
+ }
+
+ // Least busy dominator seen so far.
+ unsigned Depth = Loop->getLoopDepth();
+ if (Depth < BestDepth) {
+ BestMBB = MBB;
+ BestDepth = Depth;
+ DEBUG(dbgs() << "Def in BB#" << DefMBB->getNumber() << " dominates BB#"
+ << MBB->getNumber() << " at depth " << Depth << '\n');
+ }
+
+ // Leave loop by going to the immediate dominator of the loop header.
+ // This is a bigger stride than simply walking up the dominator tree.
+ MachineDomTreeNode *IDom = MDT[Loop->getHeader()]->getIDom();
+
+ // Too far up the dominator tree?
+ if (!IDom || !MDT.dominates(DefDomNode, IDom))
+ return BestMBB;
+
+ MBB = IDom->getBlock();
+ }
+}
+
+void SplitEditor::hoistCopiesForSize() {
+ // Get the complement interval, always RegIdx 0.
+ LiveInterval *LI = Edit->get(0);
+ LiveInterval *Parent = &Edit->getParent();
+
+ // Track the nearest common dominator for all back-copies for each ParentVNI,
+ // indexed by ParentVNI->id.
+ typedef std::pair<MachineBasicBlock*, SlotIndex> DomPair;
+ SmallVector<DomPair, 8> NearestDom(Parent->getNumValNums());
+
+ // Find the nearest common dominator for parent values with multiple
+ // back-copies. If a single back-copy dominates, put it in DomPair.second.
+ for (LiveInterval::vni_iterator VI = LI->vni_begin(), VE = LI->vni_end();
+ VI != VE; ++VI) {
+ VNInfo *VNI = *VI;
+ VNInfo *ParentVNI = Edit->getParent().getVNInfoAt(VNI->def);
+ assert(ParentVNI && "Parent not live at complement def");
+
+ // Don't hoist remats. The complement is probably going to disappear
+ // completely anyway.
+ if (Edit->didRematerialize(ParentVNI))
+ continue;
+
+ MachineBasicBlock *ValMBB = LIS.getMBBFromIndex(VNI->def);
+ DomPair &Dom = NearestDom[ParentVNI->id];
+
+ // Keep directly defined parent values. This is either a PHI or an
+ // instruction in the complement range. All other copies of ParentVNI
+ // should be eliminated.
+ if (VNI->def == ParentVNI->def) {
+ DEBUG(dbgs() << "Direct complement def at " << VNI->def << '\n');
+ Dom = DomPair(ValMBB, VNI->def);
+ continue;
+ }
+ // Skip the singly mapped values. There is nothing to gain from hoisting a
+ // single back-copy.
+ if (Values.lookup(std::make_pair(0, ParentVNI->id)).getPointer()) {
+ DEBUG(dbgs() << "Single complement def at " << VNI->def << '\n');
+ continue;
+ }
+
+ if (!Dom.first) {
+ // First time we see ParentVNI. VNI dominates itself.
+ Dom = DomPair(ValMBB, VNI->def);
+ } else if (Dom.first == ValMBB) {
+ // Two defs in the same block. Pick the earlier def.
+ if (!Dom.second.isValid() || VNI->def < Dom.second)
+ Dom.second = VNI->def;
+ } else {
+ // Different basic blocks. Check if one dominates.
+ MachineBasicBlock *Near =
+ MDT.findNearestCommonDominator(Dom.first, ValMBB);
+ if (Near == ValMBB)
+ // Def ValMBB dominates.
+ Dom = DomPair(ValMBB, VNI->def);
+ else if (Near != Dom.first)
+ // None dominate. Hoist to common dominator, need new def.
+ Dom = DomPair(Near, SlotIndex());
+ }
+
+ DEBUG(dbgs() << "Multi-mapped complement " << VNI->id << '@' << VNI->def
+ << " for parent " << ParentVNI->id << '@' << ParentVNI->def
+ << " hoist to BB#" << Dom.first->getNumber() << ' '
+ << Dom.second << '\n');
+ }
+
+ // Insert the hoisted copies.
+ for (unsigned i = 0, e = Parent->getNumValNums(); i != e; ++i) {
+ DomPair &Dom = NearestDom[i];
+ if (!Dom.first || Dom.second.isValid())
+ continue;
+ // This value needs a hoisted copy inserted at the end of Dom.first.
+ VNInfo *ParentVNI = Parent->getValNumInfo(i);
+ MachineBasicBlock *DefMBB = LIS.getMBBFromIndex(ParentVNI->def);
+ // Get a less loopy dominator than Dom.first.
+ Dom.first = findShallowDominator(Dom.first, DefMBB);
+ SlotIndex Last = LIS.getMBBEndIdx(Dom.first).getPrevSlot();
+ Dom.second =
+ defFromParent(0, ParentVNI, Last, *Dom.first,
+ LIS.getLastSplitPoint(Edit->getParent(), Dom.first))->def;
+ }
+
+ // Remove redundant back-copies that are now known to be dominated by another
+ // def with the same value.
+ SmallVector<VNInfo*, 8> BackCopies;
+ for (LiveInterval::vni_iterator VI = LI->vni_begin(), VE = LI->vni_end();
+ VI != VE; ++VI) {
+ VNInfo *VNI = *VI;
+ VNInfo *ParentVNI = Edit->getParent().getVNInfoAt(VNI->def);
+ const DomPair &Dom = NearestDom[ParentVNI->id];
+ if (!Dom.first || Dom.second == VNI->def)
+ continue;
+ BackCopies.push_back(VNI);
+ forceRecompute(0, ParentVNI);
+ }
+ removeBackCopies(BackCopies);
+}
+
+
+/// transferValues - Transfer all possible values to the new live ranges.
+/// Values that were rematerialized are left alone, they need LRCalc.extend().
+bool SplitEditor::transferValues() {
bool Skipped = false;
RegAssignMap::const_iterator AssignI = RegAssign.begin();
for (LiveInterval::const_iterator ParentI = Edit->getParent().begin(),
RegIdx = 0;
End = std::min(End, AssignI.start());
}
+
+ // The interval [Start;End) is continuously mapped to RegIdx, ParentVNI.
DEBUG(dbgs() << " [" << Start << ';' << End << ")=" << RegIdx);
- if (VNInfo *VNI = Values.lookup(std::make_pair(RegIdx, ParentVNI->id))) {
+ LiveInterval *LI = Edit->get(RegIdx);
+
+ // Check for a simply defined value that can be blitted directly.
+ ValueForcePair VFP = Values.lookup(std::make_pair(RegIdx, ParentVNI->id));
+ if (VNInfo *VNI = VFP.getPointer()) {
DEBUG(dbgs() << ':' << VNI->id);
- Edit->get(RegIdx)->addRange(LiveRange(Start, End, VNI));
- } else
+ LI->addRange(LiveRange(Start, End, VNI));
+ Start = End;
+ continue;
+ }
+
+ // Skip values with forced recomputation.
+ if (VFP.getInt()) {
+ DEBUG(dbgs() << "(recalc)");
Skipped = true;
+ Start = End;
+ continue;
+ }
+
+ LiveRangeCalc &LRC = getLRCalc(RegIdx);
+
+ // This value has multiple defs in RegIdx, but it wasn't rematerialized,
+ // so the live range is accurate. Add live-in blocks in [Start;End) to the
+ // LiveInBlocks.
+ MachineFunction::iterator MBB = LIS.getMBBFromIndex(Start);
+ SlotIndex BlockStart, BlockEnd;
+ tie(BlockStart, BlockEnd) = LIS.getSlotIndexes()->getMBBRange(MBB);
+
+ // The first block may be live-in, or it may have its own def.
+ if (Start != BlockStart) {
+ VNInfo *VNI = LI->extendInBlock(BlockStart, std::min(BlockEnd, End));
+ assert(VNI && "Missing def for complex mapped value");
+ DEBUG(dbgs() << ':' << VNI->id << "*BB#" << MBB->getNumber());
+ // MBB has its own def. Is it also live-out?
+ if (BlockEnd <= End)
+ LRC.setLiveOutValue(MBB, VNI);
+
+ // Skip to the next block for live-in.
+ ++MBB;
+ BlockStart = BlockEnd;
+ }
+
+ // Handle the live-in blocks covered by [Start;End).
+ assert(Start <= BlockStart && "Expected live-in block");
+ while (BlockStart < End) {
+ DEBUG(dbgs() << ">BB#" << MBB->getNumber());
+ BlockEnd = LIS.getMBBEndIdx(MBB);
+ if (BlockStart == ParentVNI->def) {
+ // This block has the def of a parent PHI, so it isn't live-in.
+ assert(ParentVNI->isPHIDef() && "Non-phi defined at block start?");
+ VNInfo *VNI = LI->extendInBlock(BlockStart, std::min(BlockEnd, End));
+ assert(VNI && "Missing def for complex mapped parent PHI");
+ if (End >= BlockEnd)
+ LRC.setLiveOutValue(MBB, VNI); // Live-out as well.
+ } else {
+ // This block needs a live-in value. The last block covered may not
+ // be live-out.
+ if (End < BlockEnd)
+ LRC.addLiveInBlock(LI, MDT[MBB], End);
+ else {
+ // Live-through, and we don't know the value.
+ LRC.addLiveInBlock(LI, MDT[MBB]);
+ LRC.setLiveOutValue(MBB, 0);
+ }
+ }
+ BlockStart = BlockEnd;
+ ++MBB;
+ }
Start = End;
} while (Start != ParentI->end);
DEBUG(dbgs() << '\n');
}
+
+ LRCalc[0].calculateValues(LIS.getSlotIndexes(), &MDT,
+ &LIS.getVNInfoAllocator());
+ if (SpillMode)
+ LRCalc[1].calculateValues(LIS.getSlotIndexes(), &MDT,
+ &LIS.getVNInfoAllocator());
+
return Skipped;
}
if (PHIVNI->isUnused() || !PHIVNI->isPHIDef())
continue;
unsigned RegIdx = RegAssign.lookup(PHIVNI->def);
+ LiveInterval *LI = Edit->get(RegIdx);
+ LiveRangeCalc &LRC = getLRCalc(RegIdx);
MachineBasicBlock *MBB = LIS.getMBBFromIndex(PHIVNI->def);
for (MachineBasicBlock::pred_iterator PI = MBB->pred_begin(),
PE = MBB->pred_end(); PI != PE; ++PI) {
- SlotIndex End = LIS.getMBBEndIdx(*PI).getPrevSlot();
+ SlotIndex End = LIS.getMBBEndIdx(*PI);
+ SlotIndex LastUse = End.getPrevSlot();
// The predecessor may not have a live-out value. That is OK, like an
// undef PHI operand.
- if (Edit->getParent().liveAt(End)) {
- assert(RegAssign.lookup(End) == RegIdx &&
+ if (Edit->getParent().liveAt(LastUse)) {
+ assert(RegAssign.lookup(LastUse) == RegIdx &&
"Different register assignment in phi predecessor");
- extendRange(RegIdx, End);
+ LRC.extend(LI, End,
+ LIS.getSlotIndexes(), &MDT, &LIS.getVNInfoAllocator());
}
}
}
continue;
}
- // <undef> operands don't really read the register, so just assign them to
- // the complement.
- if (MO.isUse() && MO.isUndef()) {
- MO.setReg(Edit->get(0)->reg);
- continue;
- }
-
+ // <undef> operands don't really read the register, so it doesn't matter
+ // which register we choose. When the use operand is tied to a def, we must
+ // use the same register as the def, so just do that always.
SlotIndex Idx = LIS.getInstructionIndex(MI);
- if (MO.isDef())
- Idx = MO.isEarlyClobber() ? Idx.getUseIndex() : Idx.getDefIndex();
+ if (MO.isDef() || MO.isUndef())
+ Idx = Idx.getRegSlot(MO.isEarlyClobber());
// Rewrite to the mapped register at Idx.
unsigned RegIdx = RegAssign.lookup(Idx);
- MO.setReg(Edit->get(RegIdx)->reg);
+ LiveInterval *LI = Edit->get(RegIdx);
+ MO.setReg(LI->reg);
DEBUG(dbgs() << " rewr BB#" << MI->getParent()->getNumber() << '\t'
<< Idx << ':' << RegIdx << '\t' << *MI);
// Extend liveness to Idx if the instruction reads reg.
- if (!ExtendRanges)
+ if (!ExtendRanges || MO.isUndef())
continue;
// Skip instructions that don't read Reg.
if (!Edit->getParent().liveAt(Idx))
continue;
} else
- Idx = Idx.getUseIndex();
+ Idx = Idx.getRegSlot(true);
- extendRange(RegIdx, Idx);
+ getLRCalc(RegIdx).extend(LI, Idx.getNextSlot(), LIS.getSlotIndexes(),
+ &MDT, &LIS.getVNInfoAllocator());
}
}
LiveInterval *LI = *I;
for (LiveInterval::const_iterator LII = LI->begin(), LIE = LI->end();
LII != LIE; ++LII) {
- // Dead defs end at the store slot.
- if (LII->end != LII->valno->def.getNextSlot())
+ // Dead defs end at the dead slot.
+ if (LII->end != LII->valno->def.getDeadSlot())
continue;
MachineInstr *MI = LIS.getInstructionFromIndex(LII->valno->def);
assert(MI && "Missing instruction for dead def");
Edit->eliminateDeadDefs(Dead, LIS, VRM, TII);
}
-void SplitEditor::finish() {
- assert(OpenIdx == 0 && "Previous LI not closed before rewrite");
+void SplitEditor::finish(SmallVectorImpl<unsigned> *LRMap) {
++NumFinished;
// At this point, the live intervals in Edit contain VNInfos corresponding to
VNI->setIsPHIDef(ParentVNI->isPHIDef());
VNI->setCopy(ParentVNI->getCopy());
- // Mark rematted values as complex everywhere to force liveness computation.
+ // Force rematted values to be recomputed everywhere.
// The new live ranges may be truncated.
if (Edit->didRematerialize(ParentVNI))
for (unsigned i = 0, e = Edit->size(); i != e; ++i)
- markComplexMapped(i, ParentVNI);
+ forceRecompute(i, ParentVNI);
}
-#ifndef NDEBUG
- // Every new interval must have a def by now, otherwise the split is bogus.
- for (LiveRangeEdit::iterator I = Edit->begin(), E = Edit->end(); I != E; ++I)
- assert((*I)->hasAtLeastOneValue() && "Split interval has no value");
-#endif
+ // Hoist back-copies to the complement interval when in spill mode.
+ switch (SpillMode) {
+ case SM_Partition:
+ // Leave all back-copies as is.
+ break;
+ case SM_Size:
+ hoistCopiesForSize();
+ break;
+ case SM_Speed:
+ llvm_unreachable("Spill mode 'speed' not implemented yet");
+ break;
+ }
- // Transfer the simply mapped values, check if any are complex.
- bool Complex = transferSimpleValues();
- if (Complex)
+ // Transfer the simply mapped values, check if any are skipped.
+ bool Skipped = transferValues();
+ if (Skipped)
extendPHIKillRanges();
else
++NumSimple;
// Rewrite virtual registers, possibly extending ranges.
- rewriteAssigned(Complex);
+ rewriteAssigned(Skipped);
// Delete defs that were rematted everywhere.
- if (Complex)
+ if (Skipped)
deleteRematVictims();
// Get rid of unused values and set phi-kill flags.
for (LiveRangeEdit::iterator I = Edit->begin(), E = Edit->end(); I != E; ++I)
(*I)->RenumberValues(LIS);
+ // Provide a reverse mapping from original indices to Edit ranges.
+ if (LRMap) {
+ LRMap->clear();
+ for (unsigned i = 0, e = Edit->size(); i != e; ++i)
+ LRMap->push_back(i);
+ }
+
// Now check if any registers were separated into multiple components.
ConnectedVNInfoEqClasses ConEQ(LIS);
for (unsigned i = 0, e = Edit->size(); i != e; ++i) {
DEBUG(dbgs() << " " << NumComp << " components: " << *li << '\n');
SmallVector<LiveInterval*, 8> dups;
dups.push_back(li);
- for (unsigned i = 1; i != NumComp; ++i)
+ for (unsigned j = 1; j != NumComp; ++j)
dups.push_back(&Edit->create(LIS, VRM));
ConEQ.Distribute(&dups[0], MRI);
+ // The new intervals all map back to i.
+ if (LRMap)
+ LRMap->resize(Edit->size(), i);
}
// Calculate spill weight and allocation hints for new intervals.
Edit->calculateRegClassAndHint(VRM.getMachineFunction(), LIS, SA.Loops);
+
+ assert(!LRMap || LRMap->size() == Edit->size());
}
// Single Block Splitting
//===----------------------------------------------------------------------===//
-/// getMultiUseBlocks - if CurLI has more than one use in a basic block, it
-/// may be an advantage to split CurLI for the duration of the block.
-bool SplitAnalysis::getMultiUseBlocks(BlockPtrSet &Blocks) {
- // If CurLI is local to one block, there is no point to splitting it.
- if (LiveBlocks.size() <= 1)
+bool SplitAnalysis::shouldSplitSingleBlock(const BlockInfo &BI,
+ bool SingleInstrs) const {
+ // Always split for multiple instructions.
+ if (!BI.isOneInstr())
+ return true;
+ // Don't split for single instructions unless explicitly requested.
+ if (!SingleInstrs)
return false;
- // Add blocks with multiple uses.
- for (unsigned i = 0, e = LiveBlocks.size(); i != e; ++i) {
- const BlockInfo &BI = LiveBlocks[i];
- if (!BI.Uses)
- continue;
- unsigned Instrs = UsingBlocks.lookup(BI.MBB);
- if (Instrs <= 1)
- continue;
- if (Instrs == 2 && BI.LiveIn && BI.LiveOut && !BI.LiveThrough)
- continue;
- Blocks.insert(BI.MBB);
+ // Splitting a live-through range always makes progress.
+ if (BI.LiveIn && BI.LiveOut)
+ return true;
+ // No point in isolating a copy. It has no register class constraints.
+ if (LIS.getInstructionFromIndex(BI.FirstInstr)->isCopyLike())
+ return false;
+ // Finally, don't isolate an end point that was created by earlier splits.
+ return isOriginalEndpoint(BI.FirstInstr);
+}
+
+void SplitEditor::splitSingleBlock(const SplitAnalysis::BlockInfo &BI) {
+ openIntv();
+ SlotIndex LastSplitPoint = SA.getLastSplitPoint(BI.MBB->getNumber());
+ SlotIndex SegStart = enterIntvBefore(std::min(BI.FirstInstr,
+ LastSplitPoint));
+ if (!BI.LiveOut || BI.LastInstr < LastSplitPoint) {
+ useIntv(SegStart, leaveIntvAfter(BI.LastInstr));
+ } else {
+ // The last use is after the last valid split point.
+ SlotIndex SegStop = leaveIntvBefore(LastSplitPoint);
+ useIntv(SegStart, SegStop);
+ overlapIntv(SegStop, BI.LastInstr);
}
- return !Blocks.empty();
}
-/// splitSingleBlocks - Split CurLI into a separate live interval inside each
-/// basic block in Blocks.
-void SplitEditor::splitSingleBlocks(const SplitAnalysis::BlockPtrSet &Blocks) {
- DEBUG(dbgs() << " splitSingleBlocks for " << Blocks.size() << " blocks.\n");
- for (unsigned i = 0, e = SA.LiveBlocks.size(); i != e; ++i) {
- const SplitAnalysis::BlockInfo &BI = SA.LiveBlocks[i];
- if (!BI.Uses || !Blocks.count(BI.MBB))
- continue;
+//===----------------------------------------------------------------------===//
+// Global Live Range Splitting Support
+//===----------------------------------------------------------------------===//
+
+// These methods support a method of global live range splitting that uses a
+// global algorithm to decide intervals for CFG edges. They will insert split
+// points and color intervals in basic blocks while avoiding interference.
+//
+// Note that splitSingleBlock is also useful for blocks where both CFG edges
+// are on the stack.
+
+void SplitEditor::splitLiveThroughBlock(unsigned MBBNum,
+ unsigned IntvIn, SlotIndex LeaveBefore,
+ unsigned IntvOut, SlotIndex EnterAfter){
+ SlotIndex Start, Stop;
+ tie(Start, Stop) = LIS.getSlotIndexes()->getMBBRange(MBBNum);
+
+ DEBUG(dbgs() << "BB#" << MBBNum << " [" << Start << ';' << Stop
+ << ") intf " << LeaveBefore << '-' << EnterAfter
+ << ", live-through " << IntvIn << " -> " << IntvOut);
+
+ assert((IntvIn || IntvOut) && "Use splitSingleBlock for isolated blocks");
+
+ assert((!LeaveBefore || LeaveBefore < Stop) && "Interference after block");
+ assert((!IntvIn || !LeaveBefore || LeaveBefore > Start) && "Impossible intf");
+ assert((!EnterAfter || EnterAfter >= Start) && "Interference before block");
+
+ MachineBasicBlock *MBB = VRM.getMachineFunction().getBlockNumbered(MBBNum);
+
+ if (!IntvOut) {
+ DEBUG(dbgs() << ", spill on entry.\n");
+ //
+ // <<<<<<<<< Possible LeaveBefore interference.
+ // |-----------| Live through.
+ // -____________ Spill on entry.
+ //
+ selectIntv(IntvIn);
+ SlotIndex Idx = leaveIntvAtTop(*MBB);
+ assert((!LeaveBefore || Idx <= LeaveBefore) && "Interference");
+ (void)Idx;
+ return;
+ }
+
+ if (!IntvIn) {
+ DEBUG(dbgs() << ", reload on exit.\n");
+ //
+ // >>>>>>> Possible EnterAfter interference.
+ // |-----------| Live through.
+ // ___________-- Reload on exit.
+ //
+ selectIntv(IntvOut);
+ SlotIndex Idx = enterIntvAtEnd(*MBB);
+ assert((!EnterAfter || Idx >= EnterAfter) && "Interference");
+ (void)Idx;
+ return;
+ }
- openIntv();
- SlotIndex SegStart = enterIntvBefore(std::min(BI.FirstUse,
- BI.LastSplitPoint));
- if (!BI.LiveOut || BI.LastUse < BI.LastSplitPoint) {
- useIntv(SegStart, leaveIntvAfter(BI.LastUse));
+ if (IntvIn == IntvOut && !LeaveBefore && !EnterAfter) {
+ DEBUG(dbgs() << ", straight through.\n");
+ //
+ // |-----------| Live through.
+ // ------------- Straight through, same intv, no interference.
+ //
+ selectIntv(IntvOut);
+ useIntv(Start, Stop);
+ return;
+ }
+
+ // We cannot legally insert splits after LSP.
+ SlotIndex LSP = SA.getLastSplitPoint(MBBNum);
+ assert((!IntvOut || !EnterAfter || EnterAfter < LSP) && "Impossible intf");
+
+ if (IntvIn != IntvOut && (!LeaveBefore || !EnterAfter ||
+ LeaveBefore.getBaseIndex() > EnterAfter.getBoundaryIndex())) {
+ DEBUG(dbgs() << ", switch avoiding interference.\n");
+ //
+ // >>>> <<<< Non-overlapping EnterAfter/LeaveBefore interference.
+ // |-----------| Live through.
+ // ------======= Switch intervals between interference.
+ //
+ selectIntv(IntvOut);
+ SlotIndex Idx;
+ if (LeaveBefore && LeaveBefore < LSP) {
+ Idx = enterIntvBefore(LeaveBefore);
+ useIntv(Idx, Stop);
} else {
- // The last use is after the last valid split point.
- SlotIndex SegStop = leaveIntvBefore(BI.LastSplitPoint);
- useIntv(SegStart, SegStop);
- overlapIntv(SegStop, BI.LastUse);
+ Idx = enterIntvAtEnd(*MBB);
+ }
+ selectIntv(IntvIn);
+ useIntv(Start, Idx);
+ assert((!LeaveBefore || Idx <= LeaveBefore) && "Interference");
+ assert((!EnterAfter || Idx >= EnterAfter) && "Interference");
+ return;
+ }
+
+ DEBUG(dbgs() << ", create local intv for interference.\n");
+ //
+ // >>><><><><<<< Overlapping EnterAfter/LeaveBefore interference.
+ // |-----------| Live through.
+ // ==---------== Switch intervals before/after interference.
+ //
+ assert(LeaveBefore <= EnterAfter && "Missed case");
+
+ selectIntv(IntvOut);
+ SlotIndex Idx = enterIntvAfter(EnterAfter);
+ useIntv(Idx, Stop);
+ assert((!EnterAfter || Idx >= EnterAfter) && "Interference");
+
+ selectIntv(IntvIn);
+ Idx = leaveIntvBefore(LeaveBefore);
+ useIntv(Start, Idx);
+ assert((!LeaveBefore || Idx <= LeaveBefore) && "Interference");
+}
+
+
+void SplitEditor::splitRegInBlock(const SplitAnalysis::BlockInfo &BI,
+ unsigned IntvIn, SlotIndex LeaveBefore) {
+ SlotIndex Start, Stop;
+ tie(Start, Stop) = LIS.getSlotIndexes()->getMBBRange(BI.MBB);
+
+ DEBUG(dbgs() << "BB#" << BI.MBB->getNumber() << " [" << Start << ';' << Stop
+ << "), uses " << BI.FirstInstr << '-' << BI.LastInstr
+ << ", reg-in " << IntvIn << ", leave before " << LeaveBefore
+ << (BI.LiveOut ? ", stack-out" : ", killed in block"));
+
+ assert(IntvIn && "Must have register in");
+ assert(BI.LiveIn && "Must be live-in");
+ assert((!LeaveBefore || LeaveBefore > Start) && "Bad interference");
+
+ if (!BI.LiveOut && (!LeaveBefore || LeaveBefore >= BI.LastInstr)) {
+ DEBUG(dbgs() << " before interference.\n");
+ //
+ // <<< Interference after kill.
+ // |---o---x | Killed in block.
+ // ========= Use IntvIn everywhere.
+ //
+ selectIntv(IntvIn);
+ useIntv(Start, BI.LastInstr);
+ return;
+ }
+
+ SlotIndex LSP = SA.getLastSplitPoint(BI.MBB->getNumber());
+
+ if (!LeaveBefore || LeaveBefore > BI.LastInstr.getBoundaryIndex()) {
+ //
+ // <<< Possible interference after last use.
+ // |---o---o---| Live-out on stack.
+ // =========____ Leave IntvIn after last use.
+ //
+ // < Interference after last use.
+ // |---o---o--o| Live-out on stack, late last use.
+ // ============ Copy to stack after LSP, overlap IntvIn.
+ // \_____ Stack interval is live-out.
+ //
+ if (BI.LastInstr < LSP) {
+ DEBUG(dbgs() << ", spill after last use before interference.\n");
+ selectIntv(IntvIn);
+ SlotIndex Idx = leaveIntvAfter(BI.LastInstr);
+ useIntv(Start, Idx);
+ assert((!LeaveBefore || Idx <= LeaveBefore) && "Interference");
+ } else {
+ DEBUG(dbgs() << ", spill before last split point.\n");
+ selectIntv(IntvIn);
+ SlotIndex Idx = leaveIntvBefore(LSP);
+ overlapIntv(Idx, BI.LastInstr);
+ useIntv(Start, Idx);
+ assert((!LeaveBefore || Idx <= LeaveBefore) && "Interference");
}
- closeIntv();
+ return;
+ }
+
+ // The interference is overlapping somewhere we wanted to use IntvIn. That
+ // means we need to create a local interval that can be allocated a
+ // different register.
+ unsigned LocalIntv = openIntv();
+ (void)LocalIntv;
+ DEBUG(dbgs() << ", creating local interval " << LocalIntv << ".\n");
+
+ if (!BI.LiveOut || BI.LastInstr < LSP) {
+ //
+ // <<<<<<< Interference overlapping uses.
+ // |---o---o---| Live-out on stack.
+ // =====----____ Leave IntvIn before interference, then spill.
+ //
+ SlotIndex To = leaveIntvAfter(BI.LastInstr);
+ SlotIndex From = enterIntvBefore(LeaveBefore);
+ useIntv(From, To);
+ selectIntv(IntvIn);
+ useIntv(Start, From);
+ assert((!LeaveBefore || From <= LeaveBefore) && "Interference");
+ return;
+ }
+
+ // <<<<<<< Interference overlapping uses.
+ // |---o---o--o| Live-out on stack, late last use.
+ // =====------- Copy to stack before LSP, overlap LocalIntv.
+ // \_____ Stack interval is live-out.
+ //
+ SlotIndex To = leaveIntvBefore(LSP);
+ overlapIntv(To, BI.LastInstr);
+ SlotIndex From = enterIntvBefore(std::min(To, LeaveBefore));
+ useIntv(From, To);
+ selectIntv(IntvIn);
+ useIntv(Start, From);
+ assert((!LeaveBefore || From <= LeaveBefore) && "Interference");
+}
+
+void SplitEditor::splitRegOutBlock(const SplitAnalysis::BlockInfo &BI,
+ unsigned IntvOut, SlotIndex EnterAfter) {
+ SlotIndex Start, Stop;
+ tie(Start, Stop) = LIS.getSlotIndexes()->getMBBRange(BI.MBB);
+
+ DEBUG(dbgs() << "BB#" << BI.MBB->getNumber() << " [" << Start << ';' << Stop
+ << "), uses " << BI.FirstInstr << '-' << BI.LastInstr
+ << ", reg-out " << IntvOut << ", enter after " << EnterAfter
+ << (BI.LiveIn ? ", stack-in" : ", defined in block"));
+
+ SlotIndex LSP = SA.getLastSplitPoint(BI.MBB->getNumber());
+
+ assert(IntvOut && "Must have register out");
+ assert(BI.LiveOut && "Must be live-out");
+ assert((!EnterAfter || EnterAfter < LSP) && "Bad interference");
+
+ if (!BI.LiveIn && (!EnterAfter || EnterAfter <= BI.FirstInstr)) {
+ DEBUG(dbgs() << " after interference.\n");
+ //
+ // >>>> Interference before def.
+ // | o---o---| Defined in block.
+ // ========= Use IntvOut everywhere.
+ //
+ selectIntv(IntvOut);
+ useIntv(BI.FirstInstr, Stop);
+ return;
}
- finish();
+
+ if (!EnterAfter || EnterAfter < BI.FirstInstr.getBaseIndex()) {
+ DEBUG(dbgs() << ", reload after interference.\n");
+ //
+ // >>>> Interference before def.
+ // |---o---o---| Live-through, stack-in.
+ // ____========= Enter IntvOut before first use.
+ //
+ selectIntv(IntvOut);
+ SlotIndex Idx = enterIntvBefore(std::min(LSP, BI.FirstInstr));
+ useIntv(Idx, Stop);
+ assert((!EnterAfter || Idx >= EnterAfter) && "Interference");
+ return;
+ }
+
+ // The interference is overlapping somewhere we wanted to use IntvOut. That
+ // means we need to create a local interval that can be allocated a
+ // different register.
+ DEBUG(dbgs() << ", interference overlaps uses.\n");
+ //
+ // >>>>>>> Interference overlapping uses.
+ // |---o---o---| Live-through, stack-in.
+ // ____---====== Create local interval for interference range.
+ //
+ selectIntv(IntvOut);
+ SlotIndex Idx = enterIntvAfter(EnterAfter);
+ useIntv(Idx, Stop);
+ assert((!EnterAfter || Idx >= EnterAfter) && "Interference");
+
+ openIntv();
+ SlotIndex From = enterIntvBefore(std::min(Idx, BI.FirstInstr));
+ useIntv(From, Idx);
}