//
//===----------------------------------------------------------------------===//
+#ifndef LLVM_CODEGEN_SPLITKIT_H
+#define LLVM_CODEGEN_SPLITKIT_H
+
+#include "LiveRangeCalc.h"
+#include "llvm/ADT/ArrayRef.h"
#include "llvm/ADT/DenseMap.h"
#include "llvm/ADT/IntervalMap.h"
#include "llvm/ADT/SmallPtrSet.h"
-#include "llvm/CodeGen/SlotIndexes.h"
namespace llvm {
class VNInfo;
class raw_ostream;
-/// At some point we should just include MachineDominators.h:
-class MachineDominatorTree;
-template <class NodeT> class DomTreeNodeBase;
-typedef DomTreeNodeBase<MachineBasicBlock> MachineDomTreeNode;
-
-
/// SplitAnalysis - Analyze a LiveInterval, looking for live range splitting
/// opportunities.
class SplitAnalysis {
public:
const MachineFunction &MF;
+ const VirtRegMap &VRM;
const LiveIntervals &LIS;
const MachineLoopInfo &Loops;
const TargetInstrInfo &TII;
- // Instructions using the the current register.
- typedef SmallPtrSet<const MachineInstr*, 16> InstrPtrSet;
- InstrPtrSet UsingInstrs;
-
// Sorted slot indexes of using instructions.
SmallVector<SlotIndex, 8> UseSlots;
- // The number of instructions using CurLI in each basic block.
- typedef DenseMap<const MachineBasicBlock*, unsigned> BlockCountMap;
- BlockCountMap UsingBlocks;
-
/// Additional information about basic blocks where the current variable is
/// live. Such a block will look like one of these templates:
///
/// 1. | o---x | Internal to block. Variable is only live in this block.
/// 2. |---x | Live-in, kill.
/// 3. | o---| Def, live-out.
- /// 4. |---x o---| Live-in, kill, def, live-out.
+ /// 4. |---x o---| Live-in, kill, def, live-out. Counted by NumGapBlocks.
/// 5. |---o---o---| Live-through with uses or defs.
- /// 6. |-----------| Live-through without uses. Transparent.
+ /// 6. |-----------| Live-through without uses. Counted by NumThroughBlocks.
+ ///
+ /// Two BlockInfo entries are created for template 4. One for the live-in
+ /// segment, and one for the live-out segment. These entries look as if the
+ /// block were split in the middle where the live range isn't live.
+ ///
+ /// Live-through blocks without any uses don't get BlockInfo entries. They
+ /// are simply listed in ThroughBlocks instead.
///
struct BlockInfo {
MachineBasicBlock *MBB;
- SlotIndex FirstUse; ///< First instr using current reg.
- SlotIndex LastUse; ///< Last instr using current reg.
- SlotIndex Kill; ///< Interval end point inside block.
- SlotIndex Def; ///< Interval start point inside block.
- /// Last possible point for splitting live ranges.
- SlotIndex LastSplitPoint;
- bool Uses; ///< Current reg has uses or defs in block.
- bool LiveThrough; ///< Live in whole block (Templ 5. or 6. above).
+ SlotIndex FirstInstr; ///< First instr accessing current reg.
+ SlotIndex LastInstr; ///< Last instr accessing current reg.
+ SlotIndex FirstDef; ///< First non-phi valno->def, or SlotIndex().
bool LiveIn; ///< Current reg is live in.
bool LiveOut; ///< Current reg is live out.
- // Per-interference pattern scratch data.
- bool OverlapEntry; ///< Interference overlaps entering interval.
- bool OverlapExit; ///< Interference overlaps exiting interval.
+ /// isOneInstr - Returns true when this BlockInfo describes a single
+ /// instruction.
+ bool isOneInstr() const {
+ return SlotIndex::isSameInstr(FirstInstr, LastInstr);
+ }
};
- /// Basic blocks where var is live. This array is parallel to
- /// SpillConstraints.
- SmallVector<BlockInfo, 8> LiveBlocks;
-
private:
// Current live interval.
const LiveInterval *CurLI;
+ /// LastSplitPoint - Last legal split point in each basic block in the current
+ /// function. The first entry is the first terminator, the second entry is the
+ /// last valid split point for a variable that is live in to a landing pad
+ /// successor.
+ SmallVector<std::pair<SlotIndex, SlotIndex>, 8> LastSplitPoint;
+
+ /// UseBlocks - Blocks where CurLI has uses.
+ SmallVector<BlockInfo, 8> UseBlocks;
+
+ /// NumGapBlocks - Number of duplicate entries in UseBlocks for blocks where
+ /// the live range has a gap.
+ unsigned NumGapBlocks;
+
+ /// ThroughBlocks - Block numbers where CurLI is live through without uses.
+ BitVector ThroughBlocks;
+
+ /// NumThroughBlocks - Number of live-through blocks.
+ unsigned NumThroughBlocks;
+
+ /// DidRepairRange - analyze was forced to shrinkToUses().
+ bool DidRepairRange;
+
+ SlotIndex computeLastSplitPoint(unsigned Num);
+
// Sumarize statistics by counting instructions using CurLI.
void analyzeUses();
/// calcLiveBlockInfo - Compute per-block information about CurLI.
- void calcLiveBlockInfo();
-
- /// canAnalyzeBranch - Return true if MBB ends in a branch that can be
- /// analyzed.
- bool canAnalyzeBranch(const MachineBasicBlock *MBB);
+ bool calcLiveBlockInfo();
public:
- SplitAnalysis(const MachineFunction &mf, const LiveIntervals &lis,
+ SplitAnalysis(const VirtRegMap &vrm, const LiveIntervals &lis,
const MachineLoopInfo &mli);
/// analyze - set CurLI to the specified interval, and analyze how it may be
/// split.
void analyze(const LiveInterval *li);
+ /// didRepairRange() - Returns true if CurLI was invalid and has been repaired
+ /// by analyze(). This really shouldn't happen, but sometimes the coalescer
+ /// can create live ranges that end in mid-air.
+ bool didRepairRange() const { return DidRepairRange; }
+
/// clear - clear all data structures so SplitAnalysis is ready to analyze a
/// new interval.
void clear();
/// getParent - Return the last analyzed interval.
const LiveInterval &getParent() const { return *CurLI; }
- /// hasUses - Return true if MBB has any uses of CurLI.
- bool hasUses(const MachineBasicBlock *MBB) const {
- return UsingBlocks.lookup(MBB);
+ /// getLastSplitPoint - Return that base index of the last valid split point
+ /// in the basic block numbered Num.
+ SlotIndex getLastSplitPoint(unsigned Num) {
+ // Inline the common simple case.
+ if (LastSplitPoint[Num].first.isValid() &&
+ !LastSplitPoint[Num].second.isValid())
+ return LastSplitPoint[Num].first;
+ return computeLastSplitPoint(Num);
}
- typedef SmallPtrSet<const MachineBasicBlock*, 16> BlockPtrSet;
+ /// isOriginalEndpoint - Return true if the original live range was killed or
+ /// (re-)defined at Idx. Idx should be the 'def' slot for a normal kill/def,
+ /// and 'use' for an early-clobber def.
+ /// This can be used to recognize code inserted by earlier live range
+ /// splitting.
+ bool isOriginalEndpoint(SlotIndex Idx) const;
- // Print a set of blocks with use counts.
- void print(const BlockPtrSet&, raw_ostream&) const;
+ /// getUseBlocks - Return an array of BlockInfo objects for the basic blocks
+ /// where CurLI has uses.
+ ArrayRef<BlockInfo> getUseBlocks() const { return UseBlocks; }
- /// getMultiUseBlocks - Add basic blocks to Blocks that may benefit from
- /// having CurLI split to a new live interval. Return true if Blocks can be
- /// passed to SplitEditor::splitSingleBlocks.
- bool getMultiUseBlocks(BlockPtrSet &Blocks);
-
- /// getBlockForInsideSplit - If CurLI is contained inside a single basic
- /// block, and it would pay to subdivide the interval inside that block,
- /// return it. Otherwise return NULL. The returned block can be passed to
- /// SplitEditor::splitInsideBlock.
- const MachineBasicBlock *getBlockForInsideSplit();
-};
+ /// getNumThroughBlocks - Return the number of through blocks.
+ unsigned getNumThroughBlocks() const { return NumThroughBlocks; }
+ /// isThroughBlock - Return true if CurLI is live through MBB without uses.
+ bool isThroughBlock(unsigned MBB) const { return ThroughBlocks.test(MBB); }
-/// LiveIntervalMap - Map values from a large LiveInterval into a small
-/// interval that is a subset. Insert phi-def values as needed. This class is
-/// used by SplitEditor to create new smaller LiveIntervals.
-///
-/// ParentLI is the larger interval, LI is the subset interval. Every value
-/// in LI corresponds to exactly one value in ParentLI, and the live range
-/// of the value is contained within the live range of the ParentLI value.
-/// Values in ParentLI may map to any number of OpenLI values, including 0.
-class LiveIntervalMap {
- LiveIntervals &LIS;
- MachineDominatorTree &MDT;
+ /// getThroughBlocks - Return the set of through blocks.
+ const BitVector &getThroughBlocks() const { return ThroughBlocks; }
- // The parent interval is never changed.
- const LiveInterval &ParentLI;
-
- // The child interval's values are fully contained inside ParentLI values.
- LiveInterval *LI;
-
- typedef DenseMap<const VNInfo*, VNInfo*> ValueMap;
-
- // Map ParentLI values to simple values in LI that are defined at the same
- // SlotIndex, or NULL for ParentLI values that have complex LI defs.
- // Note there is a difference between values mapping to NULL (complex), and
- // values not present (unknown/unmapped).
- ValueMap Values;
-
- typedef std::pair<VNInfo*, MachineDomTreeNode*> LiveOutPair;
- typedef DenseMap<MachineBasicBlock*,LiveOutPair> LiveOutMap;
-
- // LiveOutCache - Map each basic block where LI is live out to the live-out
- // value and its defining block. One of these conditions shall be true:
- //
- // 1. !LiveOutCache.count(MBB)
- // 2. LiveOutCache[MBB].second.getNode() == MBB
- // 3. forall P in preds(MBB): LiveOutCache[P] == LiveOutCache[MBB]
- //
- // This is only a cache, the values can be computed as:
- //
- // VNI = LI->getVNInfoAt(LIS.getMBBEndIdx(MBB))
- // Node = mbt_[LIS.getMBBFromIndex(VNI->def)]
- //
- // The cache is also used as a visiteed set by mapValue().
- LiveOutMap LiveOutCache;
-
- // Dump the live-out cache to dbgs().
- void dumpCache();
-
-public:
- LiveIntervalMap(LiveIntervals &lis,
- MachineDominatorTree &mdt,
- const LiveInterval &parentli)
- : LIS(lis), MDT(mdt), ParentLI(parentli), LI(0) {}
-
- /// reset - clear all data structures and start a new live interval.
- void reset(LiveInterval *);
-
- /// getLI - return the current live interval.
- LiveInterval *getLI() const { return LI; }
-
- /// defValue - define a value in LI from the ParentLI value VNI and Idx.
- /// Idx does not have to be ParentVNI->def, but it must be contained within
- /// ParentVNI's live range in ParentLI.
- /// Return the new LI value.
- VNInfo *defValue(const VNInfo *ParentVNI, SlotIndex Idx);
-
- /// mapValue - map ParentVNI to the corresponding LI value at Idx. It is
- /// assumed that ParentVNI is live at Idx.
- /// If ParentVNI has not been defined by defValue, it is assumed that
- /// ParentVNI->def dominates Idx.
- /// If ParentVNI has been defined by defValue one or more times, a value that
- /// dominates Idx will be returned. This may require creating extra phi-def
- /// values and adding live ranges to LI.
- /// If simple is not NULL, *simple will indicate if ParentVNI is a simply
- /// mapped value.
- VNInfo *mapValue(const VNInfo *ParentVNI, SlotIndex Idx, bool *simple = 0);
-
- // extendTo - Find the last LI value defined in MBB at or before Idx. The
- // parentli is assumed to be live at Idx. Extend the live range to include
- // Idx. Return the found VNInfo, or NULL.
- VNInfo *extendTo(const MachineBasicBlock *MBB, SlotIndex Idx);
-
- /// isMapped - Return true is ParentVNI is a known mapped value. It may be a
- /// simple 1-1 mapping or a complex mapping to later defs.
- bool isMapped(const VNInfo *ParentVNI) const {
- return Values.count(ParentVNI);
+ /// getNumLiveBlocks - Return the number of blocks where CurLI is live.
+ unsigned getNumLiveBlocks() const {
+ return getUseBlocks().size() - NumGapBlocks + getNumThroughBlocks();
}
- /// isComplexMapped - Return true if ParentVNI has received new definitions
- /// with defValue.
- bool isComplexMapped(const VNInfo *ParentVNI) const;
+ /// countLiveBlocks - Return the number of blocks where li is live. This is
+ /// guaranteed to return the same number as getNumLiveBlocks() after calling
+ /// analyze(li).
+ unsigned countLiveBlocks(const LiveInterval *li) const;
- /// markComplexMapped - Mark ParentVNI as complex mapped regardless of the
- /// number of definitions.
- void markComplexMapped(const VNInfo *ParentVNI) { Values[ParentVNI] = 0; }
-
- // addSimpleRange - Add a simple range from ParentLI to LI.
- // ParentVNI must be live in the [Start;End) interval.
- void addSimpleRange(SlotIndex Start, SlotIndex End, const VNInfo *ParentVNI);
+ typedef SmallPtrSet<const MachineBasicBlock*, 16> BlockPtrSet;
- /// addRange - Add live ranges to LI where [Start;End) intersects ParentLI.
- /// All needed values whose def is not inside [Start;End) must be defined
- /// beforehand so mapValue will work.
- void addRange(SlotIndex Start, SlotIndex End);
+ /// shouldSplitSingleBlock - Returns true if it would help to create a local
+ /// live range for the instructions in BI. There is normally no benefit to
+ /// creating a live range for a single instruction, but it does enable
+ /// register class inflation if the instruction has a restricted register
+ /// class.
+ ///
+ /// @param BI The block to be isolated.
+ /// @param SingleInstrs True when single instructions should be isolated.
+ bool shouldSplitSingleBlock(const BlockInfo &BI, bool SingleInstrs) const;
};
const TargetInstrInfo &TII;
const TargetRegisterInfo &TRI;
+public:
+
+ /// ComplementSpillMode - Select how the complement live range should be
+ /// created. SplitEditor automatically creates interval 0 to contain
+ /// anything that isn't added to another interval. This complement interval
+ /// can get quite complicated, and it can sometimes be an advantage to allow
+ /// it to overlap the other intervals. If it is going to spill anyway, no
+ /// registers are wasted by keeping a value in two places at the same time.
+ enum ComplementSpillMode {
+ /// SM_Partition(Default) - Try to create the complement interval so it
+ /// doesn't overlap any other intervals, and the original interval is
+ /// partitioned. This may require a large number of back copies and extra
+ /// PHI-defs. Only segments marked with overlapIntv will be overlapping.
+ SM_Partition,
+
+ /// SM_Size - Overlap intervals to minimize the number of inserted COPY
+ /// instructions. Copies to the complement interval are hoisted to their
+ /// common dominator, so only one COPY is required per value in the
+ /// complement interval. This also means that no extra PHI-defs need to be
+ /// inserted in the complement interval.
+ SM_Size,
+
+ /// SM_Speed - Overlap intervals to minimize the expected execution
+ /// frequency of the inserted copies. This is very similar to SM_Size, but
+ /// the complement interval may get some extra PHI-defs.
+ SM_Speed
+ };
+
+private:
+
/// Edit - The current parent register and new intervals created.
- LiveRangeEdit &Edit;
+ LiveRangeEdit *Edit;
/// Index into Edit of the currently open interval.
/// The index 0 is used for the complement, so the first interval started by
/// openIntv will be 1.
unsigned OpenIdx;
+ /// The current spill mode, selected by reset().
+ ComplementSpillMode SpillMode;
+
typedef IntervalMap<SlotIndex, unsigned> RegAssignMap;
/// Allocator for the interval map. This will eventually be shared with
/// Idx.
RegAssignMap RegAssign;
- /// LIMappers - One LiveIntervalMap or each interval in Edit.
- SmallVector<LiveIntervalMap, 4> LIMappers;
+ typedef PointerIntPair<VNInfo*, 1> ValueForcePair;
+ typedef DenseMap<std::pair<unsigned, unsigned>, ValueForcePair> ValueMap;
+
+ /// Values - keep track of the mapping from parent values to values in the new
+ /// intervals. Given a pair (RegIdx, ParentVNI->id), Values contains:
+ ///
+ /// 1. No entry - the value is not mapped to Edit.get(RegIdx).
+ /// 2. (Null, false) - the value is mapped to multiple values in
+ /// Edit.get(RegIdx). Each value is represented by a minimal live range at
+ /// its def. The full live range can be inferred exactly from the range
+ /// of RegIdx in RegAssign.
+ /// 3. (Null, true). As above, but the ranges in RegAssign are too large, and
+ /// the live range must be recomputed using LiveRangeCalc::extend().
+ /// 4. (VNI, false) The value is mapped to a single new value.
+ /// The new value has no live ranges anywhere.
+ ValueMap Values;
+
+ /// LRCalc - Cache for computing live ranges and SSA update. Each instance
+ /// can only handle non-overlapping live ranges, so use a separate
+ /// LiveRangeCalc instance for the complement interval when in spill mode.
+ LiveRangeCalc LRCalc[2];
+
+ /// getLRCalc - Return the LRCalc to use for RegIdx. In spill mode, the
+ /// complement interval can overlap the other intervals, so it gets its own
+ /// LRCalc instance. When not in spill mode, all intervals can share one.
+ LiveRangeCalc &getLRCalc(unsigned RegIdx) {
+ return LRCalc[SpillMode != SM_Partition && RegIdx != 0];
+ }
+
+ /// defValue - define a value in RegIdx from ParentVNI at Idx.
+ /// Idx does not have to be ParentVNI->def, but it must be contained within
+ /// ParentVNI's live range in ParentLI. The new value is added to the value
+ /// map.
+ /// Return the new LI value.
+ VNInfo *defValue(unsigned RegIdx, const VNInfo *ParentVNI, SlotIndex Idx);
+
+ /// forceRecompute - Force the live range of ParentVNI in RegIdx to be
+ /// recomputed by LiveRangeCalc::extend regardless of the number of defs.
+ /// This is used for values whose live range doesn't match RegAssign exactly.
+ /// They could have rematerialized, or back-copies may have been moved.
+ void forceRecompute(unsigned RegIdx, const VNInfo *ParentVNI);
/// defFromParent - Define Reg from ParentVNI at UseIdx using either
/// rematerialization or a COPY from parent. Return the new value.
MachineBasicBlock &MBB,
MachineBasicBlock::iterator I);
+ /// removeBackCopies - Remove the copy instructions that defines the values
+ /// in the vector in the complement interval.
+ void removeBackCopies(SmallVectorImpl<VNInfo*> &Copies);
+
+ /// getShallowDominator - Returns the least busy dominator of MBB that is
+ /// also dominated by DefMBB. Busy is measured by loop depth.
+ MachineBasicBlock *findShallowDominator(MachineBasicBlock *MBB,
+ MachineBasicBlock *DefMBB);
+
+ /// hoistCopiesForSize - Hoist back-copies to the complement interval in a
+ /// way that minimizes code size. This implements the SM_Size spill mode.
+ void hoistCopiesForSize();
+
+ /// transferValues - Transfer values to the new ranges.
+ /// Return true if any ranges were skipped.
+ bool transferValues();
+
+ /// extendPHIKillRanges - Extend the ranges of all values killed by original
+ /// parent PHIDefs.
+ void extendPHIKillRanges();
+
/// rewriteAssigned - Rewrite all uses of Edit.getReg() to assigned registers.
- void rewriteAssigned();
+ void rewriteAssigned(bool ExtendRanges);
- /// rewriteComponents - Rewrite all uses of Intv[0] according to the eq
- /// classes in ConEQ.
- /// This must be done when Intvs[0] is styill live at all uses, before calling
- /// ConEq.Distribute().
- void rewriteComponents(const SmallVectorImpl<LiveInterval*> &Intvs,
- const ConnectedVNInfoEqClasses &ConEq);
+ /// deleteRematVictims - Delete defs that are dead after rematerializing.
+ void deleteRematVictims();
public:
/// Create a new SplitEditor for editing the LiveInterval analyzed by SA.
/// Newly created intervals will be appended to newIntervals.
SplitEditor(SplitAnalysis &SA, LiveIntervals&, VirtRegMap&,
- MachineDominatorTree&, LiveRangeEdit&);
+ MachineDominatorTree&);
- /// getAnalysis - Get the corresponding analysis.
- SplitAnalysis &getAnalysis() { return SA; }
+ /// reset - Prepare for a new split.
+ void reset(LiveRangeEdit&, ComplementSpillMode = SM_Partition);
/// Create a new virtual register and live interval.
- void openIntv();
+ /// Return the interval index, starting from 1. Interval index 0 is the
+ /// implicit complement interval.
+ unsigned openIntv();
+
+ /// currentIntv - Return the current interval index.
+ unsigned currentIntv() const { return OpenIdx; }
+
+ /// selectIntv - Select a previously opened interval index.
+ void selectIntv(unsigned Idx);
/// enterIntvBefore - Enter the open interval before the instruction at Idx.
/// If the parent interval is not live before Idx, a COPY is not inserted.
/// Return the beginning of the new live range.
SlotIndex enterIntvBefore(SlotIndex Idx);
+ /// enterIntvAfter - Enter the open interval after the instruction at Idx.
+ /// Return the beginning of the new live range.
+ SlotIndex enterIntvAfter(SlotIndex Idx);
+
/// enterIntvAtEnd - Enter the open interval at the end of MBB.
/// Use the open interval from he inserted copy to the MBB end.
/// Return the beginning of the new live range.
///
void overlapIntv(SlotIndex Start, SlotIndex End);
- /// closeIntv - Indicate that we are done editing the currently open
- /// LiveInterval, and ranges can be trimmed.
- void closeIntv();
-
/// finish - after all the new live ranges have been created, compute the
/// remaining live range, and rewrite instructions to use the new registers.
- void finish();
+ /// @param LRMap When not null, this vector will map each live range in Edit
+ /// back to the indices returned by openIntv.
+ /// There may be extra indices created by dead code elimination.
+ void finish(SmallVectorImpl<unsigned> *LRMap = 0);
/// dump - print the current interval maping to dbgs().
void dump() const;
// ===--- High level methods ---===
- /// splitSingleBlocks - Split CurLI into a separate live interval inside each
- /// basic block in Blocks.
- void splitSingleBlocks(const SplitAnalysis::BlockPtrSet &Blocks);
+ /// splitSingleBlock - Split CurLI into a separate live interval around the
+ /// uses in a single block. This is intended to be used as part of a larger
+ /// split, and doesn't call finish().
+ void splitSingleBlock(const SplitAnalysis::BlockInfo &BI);
- /// splitInsideBlock - Split CurLI into multiple intervals inside MBB.
- void splitInsideBlock(const MachineBasicBlock *);
+ /// splitLiveThroughBlock - Split CurLI in the given block such that it
+ /// enters the block in IntvIn and leaves it in IntvOut. There may be uses in
+ /// the block, but they will be ignored when placing split points.
+ ///
+ /// @param MBBNum Block number.
+ /// @param IntvIn Interval index entering the block.
+ /// @param LeaveBefore When set, leave IntvIn before this point.
+ /// @param IntvOut Interval index leaving the block.
+ /// @param EnterAfter When set, enter IntvOut after this point.
+ void splitLiveThroughBlock(unsigned MBBNum,
+ unsigned IntvIn, SlotIndex LeaveBefore,
+ unsigned IntvOut, SlotIndex EnterAfter);
+
+ /// splitRegInBlock - Split CurLI in the given block such that it enters the
+ /// block in IntvIn and leaves it on the stack (or not at all). Split points
+ /// are placed in a way that avoids putting uses in the stack interval. This
+ /// may require creating a local interval when there is interference.
+ ///
+ /// @param BI Block descriptor.
+ /// @param IntvIn Interval index entering the block. Not 0.
+ /// @param LeaveBefore When set, leave IntvIn before this point.
+ void splitRegInBlock(const SplitAnalysis::BlockInfo &BI,
+ unsigned IntvIn, SlotIndex LeaveBefore);
+
+ /// splitRegOutBlock - Split CurLI in the given block such that it enters the
+ /// block on the stack (or isn't live-in at all) and leaves it in IntvOut.
+ /// Split points are placed to avoid interference and such that the uses are
+ /// not in the stack interval. This may require creating a local interval
+ /// when there is interference.
+ ///
+ /// @param BI Block descriptor.
+ /// @param IntvOut Interval index leaving the block.
+ /// @param EnterAfter When set, enter IntvOut after this point.
+ void splitRegOutBlock(const SplitAnalysis::BlockInfo &BI,
+ unsigned IntvOut, SlotIndex EnterAfter);
};
}
+
+#endif