#include "llvm/Target/TargetInstrInfo.h"
#include "llvm/Target/TargetLowering.h"
#include "llvm/ADT/DepthFirstIterator.h"
+#include "llvm/ADT/SmallSet.h"
#include "llvm/ADT/Statistic.h"
-#include <algorithm>
using namespace llvm;
STATISTIC(NumDSE , "Number of dead stores elided");
/// Note that operands may be added, so the MO reference is no longer valid.
static void substitutePhysReg(MachineOperand &MO, unsigned Reg,
const TargetRegisterInfo &TRI) {
- if (unsigned SubIdx = MO.getSubReg()) {
- // Insert the physical subreg and reset the subreg field.
- MO.setReg(TRI.getSubReg(Reg, SubIdx));
- MO.setSubReg(0);
-
- // Any def, dead, and kill flags apply to the full virtual register, so they
- // also apply to the full physical register. Add imp-def/dead and imp-kill
- // as needed.
+ if (MO.getSubReg()) {
+ MO.substPhysReg(Reg, TRI);
+
+ // Any kill flags apply to the full virtual register, so they also apply to
+ // the full physical register.
+ // We assume that partial defs have already been decorated with a super-reg
+ // <imp-def> operand by LiveIntervals.
MachineInstr &MI = *MO.getParent();
- if (MO.isDef())
- if (MO.isDead())
- MI.addRegisterDead(Reg, &TRI, /*AddIfNotFound=*/ true);
- else
- MI.addRegisterDefined(Reg, &TRI);
- else if (!MO.isUndef() &&
- (MO.isKill() ||
- MI.isRegTiedToDefOperand(&MO-&MI.getOperand(0))))
+ if (MO.isUse() && !MO.isUndef() &&
+ (MO.isKill() || MI.isRegTiedToDefOperand(&MO-&MI.getOperand(0))))
MI.addRegisterKilled(Reg, &TRI, /*AddIfNotFound=*/ true);
} else {
MO.setReg(Reg);
const TargetLowering *TL = MF.getTarget().getTargetLowering();
if (!TL->isTypeLegal(TL->getPointerTy()))
- // Believe it or not, this is true on PIC16.
+ // Believe it or not, this is true on 16-bit targets like PIC16.
return InsertLoc;
const TargetRegisterClass *ptrRegClass =
/// blocks each of which is a successor of the specified BB and has no other
/// predecessor.
static void findSinglePredSuccessor(MachineBasicBlock *MBB,
- SmallVectorImpl<MachineBasicBlock *> &Succs) {
+ SmallVectorImpl<MachineBasicBlock *> &Succs){
for (MachineBasicBlock::succ_iterator SI = MBB->succ_begin(),
SE = MBB->succ_end(); SI != SE; ++SI) {
MachineBasicBlock *SuccMBB = *SI;
I = PhysRegsAvailable.begin(), E = PhysRegsAvailable.end();
I != E; ++I) {
unsigned Reg = I->first;
- const TargetRegisterClass* RC = TRI->getPhysicalRegisterRegClass(Reg);
+ const TargetRegisterClass* RC = TRI->getMinimalPhysRegClass(Reg);
// FIXME: A temporary workaround. We can't reuse available value if it's
// not safe to move the def of the virtual register's class. e.g.
// X86::RFP* register classes. Do not add it as a live-in.
// Yup, use the reload register that we didn't use before.
unsigned NewReg = Op.AssignedPhysReg;
Rejected.insert(PhysReg);
- return GetRegForReload(RC, NewReg, MF, MI, Spills, MaybeDeadStores, Rejected,
- RegKills, KillOps, VRM);
+ return GetRegForReload(RC, NewReg, MF, MI, Spills, MaybeDeadStores,
+ Rejected, RegKills, KillOps, VRM);
} else {
// Otherwise, we might also have a problem if a previously reused
// value aliases the new register. If so, codegen the previous reload
for (unsigned i = 0, e = Kills.size(); i != e; ++i) {
unsigned Kill = Kills[i];
if (!Defs[Kill] && !Uses[Kill] &&
- TRI->getPhysicalRegisterRegClass(Kill) == RC)
+ RC->contains(Kill))
return Kill;
}
for (unsigned i = 0, e = LocalUses.size(); i != e; ++i) {
bool InsertSpills(MachineInstr *MI);
+ void ProcessUses(MachineInstr &MI, AvailableSpills &Spills,
+ std::vector<MachineInstr*> &MaybeDeadStores,
+ BitVector &RegKills,
+ ReuseInfo &ReusedOperands,
+ std::vector<MachineOperand*> &KillOps);
+
void RewriteMBB(LiveIntervals *LIs,
AvailableSpills &Spills, BitVector &RegKills,
std::vector<MachineOperand*> &KillOps);
if (TII->unfoldMemoryOperand(MF, &MI, UnfoldVR, false, false, NewMIs)) {
assert(NewMIs.size() == 1);
MachineInstr *NewMI = NewMIs.back();
+ MBB->insert(MII, NewMI);
NewMIs.clear();
int Idx = NewMI->findRegisterUseOperandIdx(VirtReg, false);
assert(Idx != -1);
SmallVector<unsigned, 1> Ops;
Ops.push_back(Idx);
- MachineInstr *FoldedMI = TII->foldMemoryOperand(MF, NewMI, Ops, SS);
+ MachineInstr *FoldedMI = TII->foldMemoryOperand(NewMI, Ops, SS);
+ NewMI->eraseFromParent();
if (FoldedMI) {
VRM->addSpillSlotUse(SS, FoldedMI);
if (!VRM->hasPhys(UnfoldVR))
VRM->assignVirt2Phys(UnfoldVR, UnfoldPR);
VRM->virtFolded(VirtReg, FoldedMI, VirtRegMap::isRef);
- MII = MBB->insert(MII, FoldedMI);
+ MII = FoldedMI;
InvalidateKills(MI, TRI, RegKills, KillOps);
VRM->RemoveMachineInstrFromMaps(&MI);
MBB->erase(&MI);
- MF.DeleteMachineInstr(NewMI);
return true;
}
- MF.DeleteMachineInstr(NewMI);
}
}
if (MII == MBB->begin() || !MII->killsRegister(SrcReg))
return false;
- MachineFunction &MF = *MBB->getParent();
MachineInstr &MI = *MII;
MachineBasicBlock::iterator DefMII = prior(MII);
MachineInstr *DefMI = DefMII;
MachineInstr *CommutedMI = TII->commuteInstruction(DefMI, true);
if (!CommutedMI)
return false;
+ MBB->insert(MII, CommutedMI);
SmallVector<unsigned, 1> Ops;
Ops.push_back(NewDstIdx);
- MachineInstr *FoldedMI = TII->foldMemoryOperand(MF, CommutedMI, Ops, SS);
+ MachineInstr *FoldedMI = TII->foldMemoryOperand(CommutedMI, Ops, SS);
// Not needed since foldMemoryOperand returns new MI.
- MF.DeleteMachineInstr(CommutedMI);
+ CommutedMI->eraseFromParent();
if (!FoldedMI)
return false;
MachineInstr *StoreMI = MII;
VRM->addSpillSlotUse(SS, StoreMI);
VRM->virtFolded(VirtReg, StoreMI, VirtRegMap::isMod);
- MII = MBB->insert(MII, FoldedMI); // Update MII to backtrack.
+ MII = FoldedMI; // Update MII to backtrack.
// Delete all 3 old instructions.
InvalidateKills(*ReloadMI, TRI, RegKills, KillOps);
std::vector<unsigned> &EmSpills = VRM->getEmergencySpills(MI);
for (unsigned i = 0, e = EmSpills.size(); i != e; ++i) {
unsigned PhysReg = EmSpills[i];
- const TargetRegisterClass *RC = TRI->getPhysicalRegisterRegClass(PhysReg);
+ const TargetRegisterClass *RC = TRI->getMinimalPhysRegClass(PhysReg);
assert(RC && "Unable to determine register class!");
int SS = VRM->getEmergencySpillSlot(RC);
if (UsedSS.count(SS))
bool DoReMat = VRM->isReMaterialized(VirtReg);
int SSorRMId = DoReMat
? VRM->getReMatId(VirtReg) : VRM->getStackSlot(VirtReg);
- const TargetRegisterClass* RC = MRI->getRegClass(VirtReg);
unsigned InReg = Spills.getSpillSlotOrReMatPhysReg(SSorRMId);
if (InReg == Phys) {
// If the value is already available in the expected register, save
MachineBasicBlock::iterator InsertLoc =
ComputeReloadLoc(MII, MBB->begin(), Phys, TRI, DoReMat, SSorRMId, TII,
*MBB->getParent());
-
- TII->copyRegToReg(*MBB, InsertLoc, Phys, InReg, RC, RC,
- MI->getDebugLoc());
+ MachineInstr *CopyMI = BuildMI(*MBB, InsertLoc, MI->getDebugLoc(),
+ TII->get(TargetOpcode::COPY), Phys)
+ .addReg(InReg, RegState::Kill);
// This invalidates Phys.
Spills.ClobberPhysReg(Phys);
// Remember it's available.
Spills.addAvailable(SSorRMId, Phys);
- // Mark is killed.
- MachineInstr *CopyMI = prior(InsertLoc);
CopyMI->setAsmPrinterFlag(MachineInstr::ReloadReuse);
- MachineOperand *KillOpnd = CopyMI->findRegisterUseOperand(InReg);
- KillOpnd->setIsKill();
UpdateKills(*CopyMI, TRI, RegKills, KillOps);
DEBUG(dbgs() << '\t' << *CopyMI);
return true;
}
-/// InsertEmergencySpills - Insert spills after MI if requested by VRM. Return
+/// InsertSpills - Insert spills after MI if requested by VRM. Return
/// true if spills were inserted.
bool LocalRewriter::InsertSpills(MachineInstr *MI) {
if (!VRM->isSpillPt(MI))
}
+/// ProcessUses - Process all of MI's spilled operands and all available
+/// operands.
+void LocalRewriter::ProcessUses(MachineInstr &MI, AvailableSpills &Spills,
+ std::vector<MachineInstr*> &MaybeDeadStores,
+ BitVector &RegKills,
+ ReuseInfo &ReusedOperands,
+ std::vector<MachineOperand*> &KillOps) {
+ // Clear kill info.
+ SmallSet<unsigned, 2> KilledMIRegs;
+ SmallVector<unsigned, 4> VirtUseOps;
+ for (unsigned i = 0, e = MI.getNumOperands(); i != e; ++i) {
+ MachineOperand &MO = MI.getOperand(i);
+ if (!MO.isReg() || MO.getReg() == 0)
+ continue; // Ignore non-register operands.
+
+ unsigned VirtReg = MO.getReg();
+ if (TargetRegisterInfo::isPhysicalRegister(VirtReg)) {
+ // Ignore physregs for spilling, but remember that it is used by this
+ // function.
+ MRI->setPhysRegUsed(VirtReg);
+ continue;
+ }
+
+ // We want to process implicit virtual register uses first.
+ if (MO.isImplicit())
+ // If the virtual register is implicitly defined, emit a implicit_def
+ // before so scavenger knows it's "defined".
+ // FIXME: This is a horrible hack done the by register allocator to
+ // remat a definition with virtual register operand.
+ VirtUseOps.insert(VirtUseOps.begin(), i);
+ else
+ VirtUseOps.push_back(i);
+
+ // A partial def causes problems because the same operand both reads and
+ // writes the register. This rewriter is designed to rewrite uses and defs
+ // separately, so a partial def would already have been rewritten to a
+ // physreg by the time we get to processing defs.
+ // Add an implicit use operand to model the partial def.
+ if (MO.isDef() && MO.getSubReg() && MI.readsVirtualRegister(VirtReg) &&
+ MI.findRegisterUseOperandIdx(VirtReg) == -1) {
+ VirtUseOps.insert(VirtUseOps.begin(), MI.getNumOperands());
+ MI.addOperand(MachineOperand::CreateReg(VirtReg,
+ false, // isDef
+ true)); // isImplicit
+ DEBUG(dbgs() << "Partial redef: " << MI);
+ }
+ }
+
+ // Process all of the spilled uses and all non spilled reg references.
+ SmallVector<int, 2> PotentialDeadStoreSlots;
+ KilledMIRegs.clear();
+ for (unsigned j = 0, e = VirtUseOps.size(); j != e; ++j) {
+ unsigned i = VirtUseOps[j];
+ unsigned VirtReg = MI.getOperand(i).getReg();
+ assert(TargetRegisterInfo::isVirtualRegister(VirtReg) &&
+ "Not a virtual register?");
+
+ unsigned SubIdx = MI.getOperand(i).getSubReg();
+ if (VRM->isAssignedReg(VirtReg)) {
+ // This virtual register was assigned a physreg!
+ unsigned Phys = VRM->getPhys(VirtReg);
+ MRI->setPhysRegUsed(Phys);
+ if (MI.getOperand(i).isDef())
+ ReusedOperands.markClobbered(Phys);
+ substitutePhysReg(MI.getOperand(i), Phys, *TRI);
+ if (VRM->isImplicitlyDefined(VirtReg))
+ // FIXME: Is this needed?
+ BuildMI(*MBB, &MI, MI.getDebugLoc(),
+ TII->get(TargetOpcode::IMPLICIT_DEF), Phys);
+ continue;
+ }
+
+ // This virtual register is now known to be a spilled value.
+ if (!MI.getOperand(i).isUse())
+ continue; // Handle defs in the loop below (handle use&def here though)
+
+ bool AvoidReload = MI.getOperand(i).isUndef();
+ // Check if it is defined by an implicit def. It should not be spilled.
+ // Note, this is for correctness reason. e.g.
+ // 8 %reg1024<def> = IMPLICIT_DEF
+ // 12 %reg1024<def> = INSERT_SUBREG %reg1024<kill>, %reg1025, 2
+ // The live range [12, 14) are not part of the r1024 live interval since
+ // it's defined by an implicit def. It will not conflicts with live
+ // interval of r1025. Now suppose both registers are spilled, you can
+ // easily see a situation where both registers are reloaded before
+ // the INSERT_SUBREG and both target registers that would overlap.
+ bool DoReMat = VRM->isReMaterialized(VirtReg);
+ int SSorRMId = DoReMat
+ ? VRM->getReMatId(VirtReg) : VRM->getStackSlot(VirtReg);
+ int ReuseSlot = SSorRMId;
+
+ // Check to see if this stack slot is available.
+ unsigned PhysReg = Spills.getSpillSlotOrReMatPhysReg(SSorRMId);
+
+ // If this is a sub-register use, make sure the reuse register is in the
+ // right register class. For example, for x86 not all of the 32-bit
+ // registers have accessible sub-registers.
+ // Similarly so for EXTRACT_SUBREG. Consider this:
+ // EDI = op
+ // MOV32_mr fi#1, EDI
+ // ...
+ // = EXTRACT_SUBREG fi#1
+ // fi#1 is available in EDI, but it cannot be reused because it's not in
+ // the right register file.
+ if (PhysReg && !AvoidReload && SubIdx) {
+ const TargetRegisterClass* RC = MRI->getRegClass(VirtReg);
+ if (!RC->contains(PhysReg))
+ PhysReg = 0;
+ }
+
+ if (PhysReg && !AvoidReload) {
+ // This spilled operand might be part of a two-address operand. If this
+ // is the case, then changing it will necessarily require changing the
+ // def part of the instruction as well. However, in some cases, we
+ // aren't allowed to modify the reused register. If none of these cases
+ // apply, reuse it.
+ bool CanReuse = true;
+ bool isTied = MI.isRegTiedToDefOperand(i);
+ if (isTied) {
+ // Okay, we have a two address operand. We can reuse this physreg as
+ // long as we are allowed to clobber the value and there isn't an
+ // earlier def that has already clobbered the physreg.
+ CanReuse = !ReusedOperands.isClobbered(PhysReg) &&
+ Spills.canClobberPhysReg(PhysReg);
+ }
+ // If this is an asm, and a PhysReg alias is used elsewhere as an
+ // earlyclobber operand, we can't also use it as an input.
+ if (MI.isInlineAsm()) {
+ for (unsigned k = 0, e = MI.getNumOperands(); k != e; ++k) {
+ MachineOperand &MOk = MI.getOperand(k);
+ if (MOk.isReg() && MOk.isEarlyClobber() &&
+ TRI->regsOverlap(MOk.getReg(), PhysReg)) {
+ CanReuse = false;
+ DEBUG(dbgs() << "Not reusing physreg " << TRI->getName(PhysReg)
+ << " for vreg" << VirtReg << ": " << MOk << '\n');
+ break;
+ }
+ }
+ }
+
+ if (CanReuse) {
+ // If this stack slot value is already available, reuse it!
+ if (ReuseSlot > VirtRegMap::MAX_STACK_SLOT)
+ DEBUG(dbgs() << "Reusing RM#"
+ << ReuseSlot-VirtRegMap::MAX_STACK_SLOT-1);
+ else
+ DEBUG(dbgs() << "Reusing SS#" << ReuseSlot);
+ DEBUG(dbgs() << " from physreg "
+ << TRI->getName(PhysReg) << " for vreg"
+ << VirtReg <<" instead of reloading into physreg "
+ << TRI->getName(VRM->getPhys(VirtReg)) << '\n');
+ unsigned RReg = SubIdx ? TRI->getSubReg(PhysReg, SubIdx) : PhysReg;
+ MI.getOperand(i).setReg(RReg);
+ MI.getOperand(i).setSubReg(0);
+
+ // The only technical detail we have is that we don't know that
+ // PhysReg won't be clobbered by a reloaded stack slot that occurs
+ // later in the instruction. In particular, consider 'op V1, V2'.
+ // If V1 is available in physreg R0, we would choose to reuse it
+ // here, instead of reloading it into the register the allocator
+ // indicated (say R1). However, V2 might have to be reloaded
+ // later, and it might indicate that it needs to live in R0. When
+ // this occurs, we need to have information available that
+ // indicates it is safe to use R1 for the reload instead of R0.
+ //
+ // To further complicate matters, we might conflict with an alias,
+ // or R0 and R1 might not be compatible with each other. In this
+ // case, we actually insert a reload for V1 in R1, ensuring that
+ // we can get at R0 or its alias.
+ ReusedOperands.addReuse(i, ReuseSlot, PhysReg,
+ VRM->getPhys(VirtReg), VirtReg);
+ if (isTied)
+ // Only mark it clobbered if this is a use&def operand.
+ ReusedOperands.markClobbered(PhysReg);
+ ++NumReused;
+
+ if (MI.getOperand(i).isKill() &&
+ ReuseSlot <= VirtRegMap::MAX_STACK_SLOT) {
+
+ // The store of this spilled value is potentially dead, but we
+ // won't know for certain until we've confirmed that the re-use
+ // above is valid, which means waiting until the other operands
+ // are processed. For now we just track the spill slot, we'll
+ // remove it after the other operands are processed if valid.
+
+ PotentialDeadStoreSlots.push_back(ReuseSlot);
+ }
+
+ // Mark is isKill if it's there no other uses of the same virtual
+ // register and it's not a two-address operand. IsKill will be
+ // unset if reg is reused.
+ if (!isTied && KilledMIRegs.count(VirtReg) == 0) {
+ MI.getOperand(i).setIsKill();
+ KilledMIRegs.insert(VirtReg);
+ }
+
+ continue;
+ } // CanReuse
+
+ // Otherwise we have a situation where we have a two-address instruction
+ // whose mod/ref operand needs to be reloaded. This reload is already
+ // available in some register "PhysReg", but if we used PhysReg as the
+ // operand to our 2-addr instruction, the instruction would modify
+ // PhysReg. This isn't cool if something later uses PhysReg and expects
+ // to get its initial value.
+ //
+ // To avoid this problem, and to avoid doing a load right after a store,
+ // we emit a copy from PhysReg into the designated register for this
+ // operand.
+ //
+ // This case also applies to an earlyclobber'd PhysReg.
+ unsigned DesignatedReg = VRM->getPhys(VirtReg);
+ assert(DesignatedReg && "Must map virtreg to physreg!");
+
+ // Note that, if we reused a register for a previous operand, the
+ // register we want to reload into might not actually be
+ // available. If this occurs, use the register indicated by the
+ // reuser.
+ if (ReusedOperands.hasReuses())
+ DesignatedReg = ReusedOperands.
+ GetRegForReload(VirtReg, DesignatedReg, &MI, Spills,
+ MaybeDeadStores, RegKills, KillOps, *VRM);
+
+ // If the mapped designated register is actually the physreg we have
+ // incoming, we don't need to inserted a dead copy.
+ if (DesignatedReg == PhysReg) {
+ // If this stack slot value is already available, reuse it!
+ if (ReuseSlot > VirtRegMap::MAX_STACK_SLOT)
+ DEBUG(dbgs() << "Reusing RM#"
+ << ReuseSlot-VirtRegMap::MAX_STACK_SLOT-1);
+ else
+ DEBUG(dbgs() << "Reusing SS#" << ReuseSlot);
+ DEBUG(dbgs() << " from physreg " << TRI->getName(PhysReg)
+ << " for vreg" << VirtReg
+ << " instead of reloading into same physreg.\n");
+ unsigned RReg = SubIdx ? TRI->getSubReg(PhysReg, SubIdx) : PhysReg;
+ MI.getOperand(i).setReg(RReg);
+ MI.getOperand(i).setSubReg(0);
+ ReusedOperands.markClobbered(RReg);
+ ++NumReused;
+ continue;
+ }
+
+ MRI->setPhysRegUsed(DesignatedReg);
+ ReusedOperands.markClobbered(DesignatedReg);
+
+ // Back-schedule reloads and remats.
+ MachineBasicBlock::iterator InsertLoc =
+ ComputeReloadLoc(&MI, MBB->begin(), PhysReg, TRI, DoReMat,
+ SSorRMId, TII, *MBB->getParent());
+ MachineInstr *CopyMI = BuildMI(*MBB, InsertLoc, MI.getDebugLoc(),
+ TII->get(TargetOpcode::COPY),
+ DesignatedReg).addReg(PhysReg);
+ CopyMI->setAsmPrinterFlag(MachineInstr::ReloadReuse);
+ UpdateKills(*CopyMI, TRI, RegKills, KillOps);
+
+ // This invalidates DesignatedReg.
+ Spills.ClobberPhysReg(DesignatedReg);
+
+ Spills.addAvailable(ReuseSlot, DesignatedReg);
+ unsigned RReg =
+ SubIdx ? TRI->getSubReg(DesignatedReg, SubIdx) : DesignatedReg;
+ MI.getOperand(i).setReg(RReg);
+ MI.getOperand(i).setSubReg(0);
+ DEBUG(dbgs() << '\t' << *prior(InsertLoc));
+ ++NumReused;
+ continue;
+ } // if (PhysReg)
+
+ // Otherwise, reload it and remember that we have it.
+ PhysReg = VRM->getPhys(VirtReg);
+ assert(PhysReg && "Must map virtreg to physreg!");
+
+ // Note that, if we reused a register for a previous operand, the
+ // register we want to reload into might not actually be
+ // available. If this occurs, use the register indicated by the
+ // reuser.
+ if (ReusedOperands.hasReuses())
+ PhysReg = ReusedOperands.GetRegForReload(VirtReg, PhysReg, &MI,
+ Spills, MaybeDeadStores, RegKills, KillOps, *VRM);
+
+ MRI->setPhysRegUsed(PhysReg);
+ ReusedOperands.markClobbered(PhysReg);
+ if (AvoidReload)
+ ++NumAvoided;
+ else {
+ // Back-schedule reloads and remats.
+ MachineBasicBlock::iterator InsertLoc =
+ ComputeReloadLoc(MI, MBB->begin(), PhysReg, TRI, DoReMat,
+ SSorRMId, TII, *MBB->getParent());
+
+ if (DoReMat) {
+ ReMaterialize(*MBB, InsertLoc, PhysReg, VirtReg, TII, TRI, *VRM);
+ } else {
+ const TargetRegisterClass* RC = MRI->getRegClass(VirtReg);
+ TII->loadRegFromStackSlot(*MBB, InsertLoc, PhysReg, SSorRMId, RC,TRI);
+ MachineInstr *LoadMI = prior(InsertLoc);
+ VRM->addSpillSlotUse(SSorRMId, LoadMI);
+ ++NumLoads;
+ DistanceMap.insert(std::make_pair(LoadMI, DistanceMap.size()));
+ }
+ // This invalidates PhysReg.
+ Spills.ClobberPhysReg(PhysReg);
+
+ // Any stores to this stack slot are not dead anymore.
+ if (!DoReMat)
+ MaybeDeadStores[SSorRMId] = NULL;
+ Spills.addAvailable(SSorRMId, PhysReg);
+ // Assumes this is the last use. IsKill will be unset if reg is reused
+ // unless it's a two-address operand.
+ if (!MI.isRegTiedToDefOperand(i) &&
+ KilledMIRegs.count(VirtReg) == 0) {
+ MI.getOperand(i).setIsKill();
+ KilledMIRegs.insert(VirtReg);
+ }
+
+ UpdateKills(*prior(InsertLoc), TRI, RegKills, KillOps);
+ DEBUG(dbgs() << '\t' << *prior(InsertLoc));
+ }
+ unsigned RReg = SubIdx ? TRI->getSubReg(PhysReg, SubIdx) : PhysReg;
+ MI.getOperand(i).setReg(RReg);
+ MI.getOperand(i).setSubReg(0);
+ }
+
+ // Ok - now we can remove stores that have been confirmed dead.
+ for (unsigned j = 0, e = PotentialDeadStoreSlots.size(); j != e; ++j) {
+ // This was the last use and the spilled value is still available
+ // for reuse. That means the spill was unnecessary!
+ int PDSSlot = PotentialDeadStoreSlots[j];
+ MachineInstr* DeadStore = MaybeDeadStores[PDSSlot];
+ if (DeadStore) {
+ DEBUG(dbgs() << "Removed dead store:\t" << *DeadStore);
+ InvalidateKills(*DeadStore, TRI, RegKills, KillOps);
+ VRM->RemoveMachineInstrFromMaps(DeadStore);
+ MBB->erase(DeadStore);
+ MaybeDeadStores[PDSSlot] = NULL;
+ ++NumDSE;
+ }
+ }
+
+}
+
/// rewriteMBB - Keep track of which spills are available even after the
-/// register allocator is done with them. If possible, avid reloading vregs.
+/// register allocator is done with them. If possible, avoid reloading vregs.
void
LocalRewriter::RewriteMBB(LiveIntervals *LIs,
AvailableSpills &Spills, BitVector &RegKills,
// ReMatDefs - These are rematerializable def MIs which are not deleted.
SmallSet<MachineInstr*, 4> ReMatDefs;
- // Clear kill info.
- SmallSet<unsigned, 2> KilledMIRegs;
-
// Keep track of the registers we have already spilled in case there are
// multiple defs of the same register in MI.
SmallSet<unsigned, 8> SpilledMIRegs;
if (InsertSpills(MII))
NextMII = llvm::next(MII);
- VirtRegMap::MI2VirtMapTy::const_iterator I, End;
bool Erased = false;
bool BackTracked = false;
MachineInstr &MI = *MII;
/// ReusedOperands - Keep track of operand reuse in case we need to undo
/// reuse.
ReuseInfo ReusedOperands(MI, TRI);
- SmallVector<unsigned, 4> VirtUseOps;
- for (unsigned i = 0, e = MI.getNumOperands(); i != e; ++i) {
- MachineOperand &MO = MI.getOperand(i);
- if (!MO.isReg() || MO.getReg() == 0)
- continue; // Ignore non-register operands.
-
- unsigned VirtReg = MO.getReg();
- if (TargetRegisterInfo::isPhysicalRegister(VirtReg)) {
- // Ignore physregs for spilling, but remember that it is used by this
- // function.
- MRI->setPhysRegUsed(VirtReg);
- continue;
- }
-
- // We want to process implicit virtual register uses first.
- if (MO.isImplicit())
- // If the virtual register is implicitly defined, emit a implicit_def
- // before so scavenger knows it's "defined".
- // FIXME: This is a horrible hack done the by register allocator to
- // remat a definition with virtual register operand.
- VirtUseOps.insert(VirtUseOps.begin(), i);
- else
- VirtUseOps.push_back(i);
- }
-
- // Process all of the spilled uses and all non spilled reg references.
- SmallVector<int, 2> PotentialDeadStoreSlots;
- KilledMIRegs.clear();
- for (unsigned j = 0, e = VirtUseOps.size(); j != e; ++j) {
- unsigned i = VirtUseOps[j];
- unsigned VirtReg = MI.getOperand(i).getReg();
- assert(TargetRegisterInfo::isVirtualRegister(VirtReg) &&
- "Not a virtual register?");
-
- unsigned SubIdx = MI.getOperand(i).getSubReg();
- if (VRM->isAssignedReg(VirtReg)) {
- // This virtual register was assigned a physreg!
- unsigned Phys = VRM->getPhys(VirtReg);
- MRI->setPhysRegUsed(Phys);
- if (MI.getOperand(i).isDef())
- ReusedOperands.markClobbered(Phys);
- substitutePhysReg(MI.getOperand(i), Phys, *TRI);
- if (VRM->isImplicitlyDefined(VirtReg))
- // FIXME: Is this needed?
- BuildMI(*MBB, &MI, MI.getDebugLoc(),
- TII->get(TargetOpcode::IMPLICIT_DEF), Phys);
- continue;
- }
-
- // This virtual register is now known to be a spilled value.
- if (!MI.getOperand(i).isUse())
- continue; // Handle defs in the loop below (handle use&def here though)
-
- bool AvoidReload = MI.getOperand(i).isUndef();
- // Check if it is defined by an implicit def. It should not be spilled.
- // Note, this is for correctness reason. e.g.
- // 8 %reg1024<def> = IMPLICIT_DEF
- // 12 %reg1024<def> = INSERT_SUBREG %reg1024<kill>, %reg1025, 2
- // The live range [12, 14) are not part of the r1024 live interval since
- // it's defined by an implicit def. It will not conflicts with live
- // interval of r1025. Now suppose both registers are spilled, you can
- // easily see a situation where both registers are reloaded before
- // the INSERT_SUBREG and both target registers that would overlap.
- bool DoReMat = VRM->isReMaterialized(VirtReg);
- int SSorRMId = DoReMat
- ? VRM->getReMatId(VirtReg) : VRM->getStackSlot(VirtReg);
- int ReuseSlot = SSorRMId;
-
- // Check to see if this stack slot is available.
- unsigned PhysReg = Spills.getSpillSlotOrReMatPhysReg(SSorRMId);
-
- // If this is a sub-register use, make sure the reuse register is in the
- // right register class. For example, for x86 not all of the 32-bit
- // registers have accessible sub-registers.
- // Similarly so for EXTRACT_SUBREG. Consider this:
- // EDI = op
- // MOV32_mr fi#1, EDI
- // ...
- // = EXTRACT_SUBREG fi#1
- // fi#1 is available in EDI, but it cannot be reused because it's not in
- // the right register file.
- if (PhysReg && !AvoidReload && SubIdx) {
- const TargetRegisterClass* RC = MRI->getRegClass(VirtReg);
- if (!RC->contains(PhysReg))
- PhysReg = 0;
- }
-
- if (PhysReg && !AvoidReload) {
- // This spilled operand might be part of a two-address operand. If this
- // is the case, then changing it will necessarily require changing the
- // def part of the instruction as well. However, in some cases, we
- // aren't allowed to modify the reused register. If none of these cases
- // apply, reuse it.
- bool CanReuse = true;
- bool isTied = MI.isRegTiedToDefOperand(i);
- if (isTied) {
- // Okay, we have a two address operand. We can reuse this physreg as
- // long as we are allowed to clobber the value and there isn't an
- // earlier def that has already clobbered the physreg.
- CanReuse = !ReusedOperands.isClobbered(PhysReg) &&
- Spills.canClobberPhysReg(PhysReg);
- }
- // If this is an asm, and PhysReg is used elsewhere as an earlyclobber
- // operand, we can't also use it as an input. (Outputs always come
- // before inputs, so we can stop looking at i.)
- if (MI.isInlineAsm()) {
- for (unsigned k=0; k<i; ++k) {
- MachineOperand &MOk = MI.getOperand(k);
- if (MOk.isReg() && MOk.getReg()==PhysReg && MOk.isEarlyClobber()) {
- CanReuse = false;
- break;
- }
- }
- }
-
- if (CanReuse) {
- // If this stack slot value is already available, reuse it!
- if (ReuseSlot > VirtRegMap::MAX_STACK_SLOT)
- DEBUG(dbgs() << "Reusing RM#"
- << ReuseSlot-VirtRegMap::MAX_STACK_SLOT-1);
- else
- DEBUG(dbgs() << "Reusing SS#" << ReuseSlot);
- DEBUG(dbgs() << " from physreg "
- << TRI->getName(PhysReg) << " for vreg"
- << VirtReg <<" instead of reloading into physreg "
- << TRI->getName(VRM->getPhys(VirtReg)) << '\n');
- unsigned RReg = SubIdx ? TRI->getSubReg(PhysReg, SubIdx) : PhysReg;
- MI.getOperand(i).setReg(RReg);
- MI.getOperand(i).setSubReg(0);
-
- // The only technical detail we have is that we don't know that
- // PhysReg won't be clobbered by a reloaded stack slot that occurs
- // later in the instruction. In particular, consider 'op V1, V2'.
- // If V1 is available in physreg R0, we would choose to reuse it
- // here, instead of reloading it into the register the allocator
- // indicated (say R1). However, V2 might have to be reloaded
- // later, and it might indicate that it needs to live in R0. When
- // this occurs, we need to have information available that
- // indicates it is safe to use R1 for the reload instead of R0.
- //
- // To further complicate matters, we might conflict with an alias,
- // or R0 and R1 might not be compatible with each other. In this
- // case, we actually insert a reload for V1 in R1, ensuring that
- // we can get at R0 or its alias.
- ReusedOperands.addReuse(i, ReuseSlot, PhysReg,
- VRM->getPhys(VirtReg), VirtReg);
- if (isTied)
- // Only mark it clobbered if this is a use&def operand.
- ReusedOperands.markClobbered(PhysReg);
- ++NumReused;
-
- if (MI.getOperand(i).isKill() &&
- ReuseSlot <= VirtRegMap::MAX_STACK_SLOT) {
-
- // The store of this spilled value is potentially dead, but we
- // won't know for certain until we've confirmed that the re-use
- // above is valid, which means waiting until the other operands
- // are processed. For now we just track the spill slot, we'll
- // remove it after the other operands are processed if valid.
-
- PotentialDeadStoreSlots.push_back(ReuseSlot);
- }
-
- // Mark is isKill if it's there no other uses of the same virtual
- // register and it's not a two-address operand. IsKill will be
- // unset if reg is reused.
- if (!isTied && KilledMIRegs.count(VirtReg) == 0) {
- MI.getOperand(i).setIsKill();
- KilledMIRegs.insert(VirtReg);
- }
-
- continue;
- } // CanReuse
-
- // Otherwise we have a situation where we have a two-address instruction
- // whose mod/ref operand needs to be reloaded. This reload is already
- // available in some register "PhysReg", but if we used PhysReg as the
- // operand to our 2-addr instruction, the instruction would modify
- // PhysReg. This isn't cool if something later uses PhysReg and expects
- // to get its initial value.
- //
- // To avoid this problem, and to avoid doing a load right after a store,
- // we emit a copy from PhysReg into the designated register for this
- // operand.
- //
- // This case also applies to an earlyclobber'd PhysReg.
- unsigned DesignatedReg = VRM->getPhys(VirtReg);
- assert(DesignatedReg && "Must map virtreg to physreg!");
-
- // Note that, if we reused a register for a previous operand, the
- // register we want to reload into might not actually be
- // available. If this occurs, use the register indicated by the
- // reuser.
- if (ReusedOperands.hasReuses())
- DesignatedReg = ReusedOperands.
- GetRegForReload(VirtReg, DesignatedReg, &MI, Spills,
- MaybeDeadStores, RegKills, KillOps, *VRM);
-
- // If the mapped designated register is actually the physreg we have
- // incoming, we don't need to inserted a dead copy.
- if (DesignatedReg == PhysReg) {
- // If this stack slot value is already available, reuse it!
- if (ReuseSlot > VirtRegMap::MAX_STACK_SLOT)
- DEBUG(dbgs() << "Reusing RM#"
- << ReuseSlot-VirtRegMap::MAX_STACK_SLOT-1);
- else
- DEBUG(dbgs() << "Reusing SS#" << ReuseSlot);
- DEBUG(dbgs() << " from physreg " << TRI->getName(PhysReg)
- << " for vreg" << VirtReg
- << " instead of reloading into same physreg.\n");
- unsigned RReg = SubIdx ? TRI->getSubReg(PhysReg, SubIdx) : PhysReg;
- MI.getOperand(i).setReg(RReg);
- MI.getOperand(i).setSubReg(0);
- ReusedOperands.markClobbered(RReg);
- ++NumReused;
- continue;
- }
-
- const TargetRegisterClass* RC = MRI->getRegClass(VirtReg);
- MRI->setPhysRegUsed(DesignatedReg);
- ReusedOperands.markClobbered(DesignatedReg);
-
- // Back-schedule reloads and remats.
- MachineBasicBlock::iterator InsertLoc =
- ComputeReloadLoc(&MI, MBB->begin(), PhysReg, TRI, DoReMat,
- SSorRMId, TII, MF);
-
- TII->copyRegToReg(*MBB, InsertLoc, DesignatedReg, PhysReg, RC, RC,
- MI.getDebugLoc());
-
- MachineInstr *CopyMI = prior(InsertLoc);
- CopyMI->setAsmPrinterFlag(MachineInstr::ReloadReuse);
- UpdateKills(*CopyMI, TRI, RegKills, KillOps);
-
- // This invalidates DesignatedReg.
- Spills.ClobberPhysReg(DesignatedReg);
-
- Spills.addAvailable(ReuseSlot, DesignatedReg);
- unsigned RReg =
- SubIdx ? TRI->getSubReg(DesignatedReg, SubIdx) : DesignatedReg;
- MI.getOperand(i).setReg(RReg);
- MI.getOperand(i).setSubReg(0);
- DEBUG(dbgs() << '\t' << *prior(MII));
- ++NumReused;
- continue;
- } // if (PhysReg)
-
- // Otherwise, reload it and remember that we have it.
- PhysReg = VRM->getPhys(VirtReg);
- assert(PhysReg && "Must map virtreg to physreg!");
-
- // Note that, if we reused a register for a previous operand, the
- // register we want to reload into might not actually be
- // available. If this occurs, use the register indicated by the
- // reuser.
- if (ReusedOperands.hasReuses())
- PhysReg = ReusedOperands.GetRegForReload(VirtReg, PhysReg, &MI,
- Spills, MaybeDeadStores, RegKills, KillOps, *VRM);
-
- MRI->setPhysRegUsed(PhysReg);
- ReusedOperands.markClobbered(PhysReg);
- if (AvoidReload)
- ++NumAvoided;
- else {
- // Back-schedule reloads and remats.
- MachineBasicBlock::iterator InsertLoc =
- ComputeReloadLoc(MII, MBB->begin(), PhysReg, TRI, DoReMat,
- SSorRMId, TII, MF);
-
- if (DoReMat) {
- ReMaterialize(*MBB, InsertLoc, PhysReg, VirtReg, TII, TRI, *VRM);
- } else {
- const TargetRegisterClass* RC = MRI->getRegClass(VirtReg);
- TII->loadRegFromStackSlot(*MBB, InsertLoc, PhysReg, SSorRMId, RC,TRI);
- MachineInstr *LoadMI = prior(InsertLoc);
- VRM->addSpillSlotUse(SSorRMId, LoadMI);
- ++NumLoads;
- DistanceMap.insert(std::make_pair(LoadMI, DistanceMap.size()));
- }
- // This invalidates PhysReg.
- Spills.ClobberPhysReg(PhysReg);
-
- // Any stores to this stack slot are not dead anymore.
- if (!DoReMat)
- MaybeDeadStores[SSorRMId] = NULL;
- Spills.addAvailable(SSorRMId, PhysReg);
- // Assumes this is the last use. IsKill will be unset if reg is reused
- // unless it's a two-address operand.
- if (!MI.isRegTiedToDefOperand(i) &&
- KilledMIRegs.count(VirtReg) == 0) {
- MI.getOperand(i).setIsKill();
- KilledMIRegs.insert(VirtReg);
- }
-
- UpdateKills(*prior(InsertLoc), TRI, RegKills, KillOps);
- DEBUG(dbgs() << '\t' << *prior(InsertLoc));
- }
- unsigned RReg = SubIdx ? TRI->getSubReg(PhysReg, SubIdx) : PhysReg;
- MI.getOperand(i).setReg(RReg);
- MI.getOperand(i).setSubReg(0);
- }
-
- // Ok - now we can remove stores that have been confirmed dead.
- for (unsigned j = 0, e = PotentialDeadStoreSlots.size(); j != e; ++j) {
- // This was the last use and the spilled value is still available
- // for reuse. That means the spill was unnecessary!
- int PDSSlot = PotentialDeadStoreSlots[j];
- MachineInstr* DeadStore = MaybeDeadStores[PDSSlot];
- if (DeadStore) {
- DEBUG(dbgs() << "Removed dead store:\t" << *DeadStore);
- InvalidateKills(*DeadStore, TRI, RegKills, KillOps);
- VRM->RemoveMachineInstrFromMaps(DeadStore);
- MBB->erase(DeadStore);
- MaybeDeadStores[PDSSlot] = NULL;
- ++NumDSE;
- }
- }
+ ProcessUses(MI, Spills, MaybeDeadStores, RegKills, ReusedOperands, KillOps);
DEBUG(dbgs() << '\t' << MI);
// If we have folded references to memory operands, make sure we clear all
// physical registers that may contain the value of the spilled virtual
// register
+
+ // Copy the folded virts to a small vector, we may change MI2VirtMap.
+ SmallVector<std::pair<unsigned, VirtRegMap::ModRef>, 4> FoldedVirts;
+ // C++0x FTW!
+ for (std::pair<VirtRegMap::MI2VirtMapTy::const_iterator,
+ VirtRegMap::MI2VirtMapTy::const_iterator> FVRange =
+ VRM->getFoldedVirts(&MI);
+ FVRange.first != FVRange.second; ++FVRange.first)
+ FoldedVirts.push_back(FVRange.first->second);
+
SmallSet<int, 2> FoldedSS;
- for (tie(I, End) = VRM->getFoldedVirts(&MI); I != End; ) {
- unsigned VirtReg = I->second.first;
- VirtRegMap::ModRef MR = I->second.second;
+ for (unsigned FVI = 0, FVE = FoldedVirts.size(); FVI != FVE; ++FVI) {
+ unsigned VirtReg = FoldedVirts[FVI].first;
+ VirtRegMap::ModRef MR = FoldedVirts[FVI].second;
DEBUG(dbgs() << "Folded vreg: " << VirtReg << " MR: " << MR);
- // MI2VirtMap be can updated which invalidate the iterator.
- // Increment the iterator first.
- ++I;
int SS = VRM->getStackSlot(VirtReg);
if (SS == VirtRegMap::NO_STACK_SLOT)
continue;
if (unsigned InReg = Spills.getSpillSlotOrReMatPhysReg(SS)) {
DEBUG(dbgs() << "Promoted Load To Copy: " << MI);
if (DestReg != InReg) {
- const TargetRegisterClass *RC = MRI->getRegClass(VirtReg);
- TII->copyRegToReg(*MBB, &MI, DestReg, InReg, RC, RC,
- MI.getDebugLoc());
MachineOperand *DefMO = MI.findRegisterDefOperand(DestReg);
- unsigned SubIdx = DefMO->getSubReg();
+ MachineInstr *CopyMI = BuildMI(*MBB, &MI, MI.getDebugLoc(),
+ TII->get(TargetOpcode::COPY))
+ .addReg(DestReg, RegState::Define, DefMO->getSubReg())
+ .addReg(InReg, RegState::Kill);
// Revisit the copy so we make sure to notice the effects of the
// operation on the destreg (either needing to RA it if it's
// virtual or needing to clobber any values if it's physical).
- NextMII = &MI;
- --NextMII; // backtrack to the copy.
+ NextMII = CopyMI;
NextMII->setAsmPrinterFlag(MachineInstr::ReloadReuse);
- // Propagate the sub-register index over.
- if (SubIdx) {
- DefMO = NextMII->findRegisterDefOperand(DestReg);
- DefMO->setSubReg(SubIdx);
- }
-
- // Mark is killed.
- MachineOperand *KillOpnd = NextMII->findRegisterUseOperand(InReg);
- KillOpnd->setIsKill();
-
BackTracked = true;
} else {
DEBUG(dbgs() << "Removing now-noop copy: " << MI);
unsigned PhysReg = Spills.getSpillSlotOrReMatPhysReg(SS);
SmallVector<MachineInstr*, 4> NewMIs;
if (PhysReg &&
- TII->unfoldMemoryOperand(MF, &MI, PhysReg, false, false, NewMIs)) {
+ TII->unfoldMemoryOperand(MF, &MI, PhysReg, false, false, NewMIs)){
MBB->insert(MII, NewMIs[0]);
InvalidateKills(MI, TRI, RegKills, KillOps);
VRM->RemoveMachineInstrFromMaps(&MI);
// Also check if it's copying from an "undef", if so, we can't
// eliminate this or else the undef marker is lost and it will
// confuses the scavenger. This is extremely rare.
- unsigned Src, Dst, SrcSR, DstSR;
- if (TII->isMoveInstr(MI, Src, Dst, SrcSR, DstSR) &&
- Src == Dst && SrcSR == DstSR &&
- !MI.findRegisterUseOperand(Src)->isUndef()) {
+ if (MI.isIdentityCopy() && !MI.getOperand(1).isUndef() &&
+ MI.getNumOperands() == 2) {
++NumDCE;
DEBUG(dbgs() << "Removing now-noop copy: " << MI);
SmallVector<unsigned, 2> KillRegs;
InvalidateKills(MI, TRI, RegKills, KillOps, &KillRegs);
if (MO.isDead() && !KillRegs.empty()) {
// Source register or an implicit super/sub-register use is killed.
- assert(KillRegs[0] == Dst ||
- TRI->isSubRegister(KillRegs[0], Dst) ||
- TRI->isSuperRegister(KillRegs[0], Dst));
+ assert(TRI->regsOverlap(KillRegs[0], MI.getOperand(0).getReg()));
// Last def is now dead.
- TransferDeadness(Src, RegKills, KillOps);
+ TransferDeadness(MI.getOperand(1).getReg(), RegKills, KillOps);
}
VRM->RemoveMachineInstrFromMaps(&MI);
MBB->erase(&MI);
// Check to see if this is a noop copy. If so, eliminate the
// instruction before considering the dest reg to be changed.
- {
- unsigned Src, Dst, SrcSR, DstSR;
- if (TII->isMoveInstr(MI, Src, Dst, SrcSR, DstSR) &&
- Src == Dst && SrcSR == DstSR) {
- ++NumDCE;
- DEBUG(dbgs() << "Removing now-noop copy: " << MI);
- InvalidateKills(MI, TRI, RegKills, KillOps);
- VRM->RemoveMachineInstrFromMaps(&MI);
- MBB->erase(&MI);
- Erased = true;
- UpdateKills(*LastStore, TRI, RegKills, KillOps);
- goto ProcessNextInst;
- }
+ if (MI.isIdentityCopy()) {
+ ++NumDCE;
+ DEBUG(dbgs() << "Removing now-noop copy: " << MI);
+ InvalidateKills(MI, TRI, RegKills, KillOps);
+ VRM->RemoveMachineInstrFromMaps(&MI);
+ MBB->erase(&MI);
+ Erased = true;
+ UpdateKills(*LastStore, TRI, RegKills, KillOps);
+ goto ProcessNextInst;
}
}
}