//===-- ConstantRange.cpp - ConstantRange implementation ------------------===//
-//
+//
// The LLVM Compiler Infrastructure
//
// This file was developed by the LLVM research group and is distributed under
// the University of Illinois Open Source License. See LICENSE.TXT for details.
-//
+//
//===----------------------------------------------------------------------===//
//
// Represent a range of possible values that may occur when the program is run
//===----------------------------------------------------------------------===//
#include "llvm/Support/ConstantRange.h"
-#include "llvm/Constants.h"
-#include "llvm/Instruction.h"
-#include "llvm/Type.h"
+#include "llvm/Support/Streams.h"
+#include <ostream>
using namespace llvm;
-static bool LT(ConstantIntegral *A, ConstantIntegral *B) {
- Constant *C = ConstantExpr::get(Instruction::SetLT, A, B);
- assert(isa<ConstantBool>(C) && "Constant folding of integrals not impl??");
- return cast<ConstantBool>(C)->getValue();
-}
-
-static bool GT(ConstantIntegral *A, ConstantIntegral *B) {
- Constant *C = ConstantExpr::get(Instruction::SetGT, A, B);
- assert(isa<ConstantBool>(C) && "Constant folding of integrals not impl??");
- return cast<ConstantBool>(C)->getValue();
-}
-
-static ConstantIntegral *Min(ConstantIntegral *A, ConstantIntegral *B) {
- return LT(A, B) ? A : B;
-}
-static ConstantIntegral *Max(ConstantIntegral *A, ConstantIntegral *B) {
- return GT(A, B) ? A : B;
-}
-
-
/// Initialize a full (the default) or empty set for the specified type.
///
-ConstantRange::ConstantRange(const Type *Ty, bool Full) {
- assert(Ty->isIntegral() &&
- "Cannot make constant range of non-integral type!");
+ConstantRange::ConstantRange(uint32_t BitWidth, bool Full) :
+ Lower(BitWidth, 0), Upper(BitWidth, 0) {
if (Full)
- Lower = Upper = ConstantIntegral::getMaxValue(Ty);
+ Lower = Upper = APInt::getMaxValue(BitWidth);
else
- Lower = Upper = ConstantIntegral::getMinValue(Ty);
+ Lower = Upper = APInt::getMinValue(BitWidth);
}
-/// Initialize a range of values explicitly... this will assert out if
-/// Lower==Upper and Lower != Min or Max for its type (or if the two constants
-/// have different types)
+/// Initialize a range to hold the single specified value.
///
-ConstantRange::ConstantRange(ConstantIntegral *L,
- ConstantIntegral *U) : Lower(L), Upper(U) {
- assert(Lower->getType() == Upper->getType() &&
- "Incompatible types for ConstantRange!");
-
- // Make sure that if L & U are equal that they are either Min or Max...
- assert((L != U || (L == ConstantIntegral::getMaxValue(L->getType()) ||
- L == ConstantIntegral::getMinValue(L->getType()))) &&
- "Lower == Upper, but they aren't min or max for type!");
-}
+ConstantRange::ConstantRange(const APInt & V) : Lower(V), Upper(V + 1) { }
-static ConstantIntegral *Next(ConstantIntegral *CI) {
- if (CI->getType() == Type::BoolTy)
- return CI == ConstantBool::True ? ConstantBool::False : ConstantBool::True;
-
- Constant *Result = ConstantExpr::get(Instruction::Add, CI,
- ConstantInt::get(CI->getType(), 1));
- return cast<ConstantIntegral>(Result);
+ConstantRange::ConstantRange(const APInt &L, const APInt &U) :
+ Lower(L), Upper(U) {
+ assert(L.getBitWidth() == U.getBitWidth() &&
+ "ConstantRange with unequal bit widths");
+ uint32_t BitWidth = L.getBitWidth();
+ assert((L != U || (L == APInt::getMaxValue(BitWidth) ||
+ L == APInt::getMinValue(BitWidth))) &&
+ "Lower == Upper, but they aren't min or max value!");
}
-/// Initialize a set of values that all satisfy the condition with C.
-///
-ConstantRange::ConstantRange(unsigned SetCCOpcode, ConstantIntegral *C) {
- switch (SetCCOpcode) {
- default: assert(0 && "Invalid SetCC opcode to ConstantRange ctor!");
- case Instruction::SetEQ: Lower = C; Upper = Next(C); return;
- case Instruction::SetNE: Upper = C; Lower = Next(C); return;
- case Instruction::SetLT:
- Lower = ConstantIntegral::getMinValue(C->getType());
- Upper = C;
- return;
- case Instruction::SetGT:
- Lower = Next(C);
- Upper = ConstantIntegral::getMinValue(C->getType()); // Min = Next(Max)
- return;
- case Instruction::SetLE:
- Lower = ConstantIntegral::getMinValue(C->getType());
- Upper = Next(C);
- return;
- case Instruction::SetGE:
- Lower = C;
- Upper = ConstantIntegral::getMinValue(C->getType()); // Min = Next(Max)
- return;
- }
-}
-
-/// getType - Return the LLVM data type of this range.
-///
-const Type *ConstantRange::getType() const { return Lower->getType(); }
-
/// isFullSet - Return true if this set contains all of the elements possible
/// for this data-type
bool ConstantRange::isFullSet() const {
- return Lower == Upper && Lower == ConstantIntegral::getMaxValue(getType());
+ return Lower == Upper && Lower == APInt::getMaxValue(getBitWidth());
}
-
+
/// isEmptySet - Return true if this set contains no members.
///
bool ConstantRange::isEmptySet() const {
- return Lower == Upper && Lower == ConstantIntegral::getMinValue(getType());
+ return Lower == Upper && Lower == APInt::getMinValue(getBitWidth());
}
/// isWrappedSet - Return true if this set wraps around the top of the range,
/// for example: [100, 8)
///
bool ConstantRange::isWrappedSet() const {
- return GT(Lower, Upper);
-}
-
-
-/// getSingleElement - If this set contains a single element, return it,
-/// otherwise return null.
-ConstantIntegral *ConstantRange::getSingleElement() const {
- if (Upper == Next(Lower)) // Is it a single element range?
- return Lower;
- return 0;
+ return Lower.ugt(Upper);
}
/// getSetSize - Return the number of elements in this set.
///
-uint64_t ConstantRange::getSetSize() const {
- if (isEmptySet()) return 0;
- if (getType() == Type::BoolTy) {
+APInt ConstantRange::getSetSize() const {
+ if (isEmptySet())
+ return APInt(getBitWidth(), 0);
+ if (getBitWidth() == 1) {
if (Lower != Upper) // One of T or F in the set...
- return 1;
- return 2; // Must be full set...
+ return APInt(2, 1);
+ return APInt(2, 2); // Must be full set...
}
-
+
// Simply subtract the bounds...
- Constant *Result =
- ConstantExpr::get(Instruction::Sub, (Constant*)Upper, (Constant*)Lower);
- return cast<ConstantInt>(Result)->getRawValue();
+ return Upper - Lower;
+}
+
+/// getUnsignedMax - Return the largest unsigned value contained in the
+/// ConstantRange.
+///
+APInt ConstantRange::getUnsignedMax() const {
+ if (isFullSet() || isWrappedSet())
+ return APInt::getMaxValue(getBitWidth());
+ else
+ return getUpper() - 1;
+}
+
+/// getUnsignedMin - Return the smallest unsigned value contained in the
+/// ConstantRange.
+///
+APInt ConstantRange::getUnsignedMin() const {
+ if (isFullSet() || (isWrappedSet() && getUpper() != 0))
+ return APInt::getMinValue(getBitWidth());
+ else
+ return getLower();
+}
+
+/// getSignedMax - Return the largest signed value contained in the
+/// ConstantRange.
+///
+APInt ConstantRange::getSignedMax() const {
+ APInt SignedMax = APInt::getSignedMaxValue(getBitWidth());
+ if (!isWrappedSet()) {
+ if (getLower().slt(getUpper() - 1))
+ return getUpper() - 1;
+ else
+ return SignedMax;
+ } else {
+ if ((getUpper() - 1).slt(getLower())) {
+ if (getLower() != SignedMax)
+ return SignedMax;
+ else
+ return getUpper() - 1;
+ } else {
+ return getUpper() - 1;
+ }
+ }
+}
+
+/// getSignedMin - Return the smallest signed value contained in the
+/// ConstantRange.
+///
+APInt ConstantRange::getSignedMin() const {
+ APInt SignedMin = APInt::getSignedMinValue(getBitWidth());
+ if (!isWrappedSet()) {
+ if (getLower().slt(getUpper() - 1))
+ return getLower();
+ else
+ return SignedMin;
+ } else {
+ if ((getUpper() - 1).slt(getLower())) {
+ if (getUpper() != SignedMin)
+ return SignedMin;
+ else
+ return getLower();
+ } else {
+ return getLower();
+ }
+ }
}
+/// contains - Return true if the specified value is in the set.
+///
+bool ConstantRange::contains(const APInt &V) const {
+ if (Lower == Upper)
+ return isFullSet();
+ if (!isWrappedSet())
+ return Lower.ule(V) && V.ult(Upper);
+ else
+ return Lower.ule(V) || V.ult(Upper);
+}
+
+/// subtract - Subtract the specified constant from the endpoints of this
+/// constant range.
+ConstantRange ConstantRange::subtract(const APInt &Val) const {
+ assert(Val.getBitWidth() == getBitWidth() && "Wrong bit width");
+ // If the set is empty or full, don't modify the endpoints.
+ if (Lower == Upper)
+ return *this;
+ return ConstantRange(Lower - Val, Upper - Val);
+}
// intersect1Wrapped - This helper function is used to intersect two ranges when
// it is known that LHS is wrapped and RHS isn't.
//
-static ConstantRange intersect1Wrapped(const ConstantRange &LHS,
- const ConstantRange &RHS) {
+ConstantRange
+ConstantRange::intersect1Wrapped(const ConstantRange &LHS,
+ const ConstantRange &RHS) {
assert(LHS.isWrappedSet() && !RHS.isWrappedSet());
// Check to see if we overlap on the Left side of RHS...
//
- if (LT(RHS.getLower(), LHS.getUpper())) {
+ if (RHS.Lower.ult(LHS.Upper)) {
// We do overlap on the left side of RHS, see if we overlap on the right of
// RHS...
- if (GT(RHS.getUpper(), LHS.getLower())) {
+ if (RHS.Upper.ugt(LHS.Lower)) {
// Ok, the result overlaps on both the left and right sides. See if the
// resultant interval will be smaller if we wrap or not...
//
- if (LHS.getSetSize() < RHS.getSetSize())
+ if (LHS.getSetSize().ult(RHS.getSetSize()))
return LHS;
else
return RHS;
} else {
// No overlap on the right, just on the left.
- return ConstantRange(RHS.getLower(), LHS.getUpper());
+ return ConstantRange(RHS.Lower, LHS.Upper);
}
-
} else {
// We don't overlap on the left side of RHS, see if we overlap on the right
// of RHS...
- if (GT(RHS.getUpper(), LHS.getLower())) {
+ if (RHS.Upper.ugt(LHS.Lower)) {
// Simple overlap...
- return ConstantRange(LHS.getLower(), RHS.getUpper());
+ return ConstantRange(LHS.Lower, RHS.Upper);
} else {
// No overlap...
- return ConstantRange(LHS.getType(), false);
+ return ConstantRange(LHS.getBitWidth(), false);
}
}
}
-/// intersect - Return the range that results from the intersection of this
+/// intersectWith - Return the range that results from the intersection of this
/// range with another range.
///
ConstantRange ConstantRange::intersectWith(const ConstantRange &CR) const {
- assert(getType() == CR.getType() && "ConstantRange types don't agree!");
+ assert(getBitWidth() == CR.getBitWidth() &&
+ "ConstantRange types don't agree!");
// Handle common special cases
- if (isEmptySet() || CR.isFullSet()) return *this;
- if (isFullSet() || CR.isEmptySet()) return CR;
+ if (isEmptySet() || CR.isFullSet())
+ return *this;
+ if (isFullSet() || CR.isEmptySet())
+ return CR;
if (!isWrappedSet()) {
if (!CR.isWrappedSet()) {
- ConstantIntegral *L = Max(Lower, CR.Lower);
- ConstantIntegral *U = Min(Upper, CR.Upper);
+ using namespace APIntOps;
+ APInt L = umax(Lower, CR.Lower);
+ APInt U = umin(Upper, CR.Upper);
- if (LT(L, U)) // If range isn't empty...
+ if (L.ult(U)) // If range isn't empty...
return ConstantRange(L, U);
else
- return ConstantRange(getType(), false); // Otherwise, return empty set
+ return ConstantRange(getBitWidth(), false);// Otherwise, empty set
} else
return intersect1Wrapped(CR, *this);
} else { // We know "this" is wrapped...
return intersect1Wrapped(*this, CR);
else {
// Both ranges are wrapped...
- ConstantIntegral *L = Max(Lower, CR.Lower);
- ConstantIntegral *U = Min(Upper, CR.Upper);
+ using namespace APIntOps;
+ APInt L = umax(Lower, CR.Lower);
+ APInt U = umin(Upper, CR.Upper);
return ConstantRange(L, U);
}
}
return *this;
}
-/// union - Return the range that results from the union of this range with
+/// unionWith - Return the range that results from the union of this range with
/// another range. The resultant range is guaranteed to include the elements of
-/// both sets, but may contain more. For example, [3, 9) union [12,15) is [3,
-/// 15), which includes 9, 10, and 11, which were not included in either set
-/// before.
+/// both sets, but may contain more. For example, [3, 9) union [12,15) is
+/// [3, 15), which includes 9, 10, and 11, which were not included in either
+/// set before.
///
ConstantRange ConstantRange::unionWith(const ConstantRange &CR) const {
- assert(getType() == CR.getType() && "ConstantRange types don't agree!");
+ assert(getBitWidth() == CR.getBitWidth() &&
+ "ConstantRange types don't agree!");
- assert(0 && "Range union not implemented yet!");
+ if ( isFullSet() || CR.isEmptySet()) return *this;
+ if (CR.isFullSet() || isEmptySet()) return CR;
- return *this;
+ if (!isWrappedSet() && CR.isWrappedSet()) return CR.unionWith(*this);
+
+ APInt L = Lower, U = Upper;
+
+ if (!isWrappedSet() && !CR.isWrappedSet()) {
+ if (CR.Lower.ult(L))
+ L = CR.Lower;
+
+ if (CR.Upper.ugt(U))
+ U = CR.Upper;
+ }
+
+ if (isWrappedSet() && !CR.isWrappedSet()) {
+ if ((CR.Lower.ult(Upper) && CR.Upper.ult(Upper)) ||
+ (CR.Lower.ugt(Lower) && CR.Upper.ugt(Lower))) {
+ return *this;
+ }
+
+ if (CR.Lower.ule(Upper) && Lower.ule(CR.Upper)) {
+ return ConstantRange(getBitWidth());
+ }
+
+ if (CR.Lower.ule(Upper) && CR.Upper.ule(Lower)) {
+ APInt d1 = CR.Upper - Upper, d2 = Lower - CR.Upper;
+ if (d1.ult(d2)) {
+ U = CR.Upper;
+ } else {
+ L = CR.Upper;
+ }
+ }
+
+ if (Upper.ult(CR.Lower) && CR.Upper.ult(Lower)) {
+ APInt d1 = CR.Lower - Upper, d2 = Lower - CR.Upper;
+ if (d1.ult(d2)) {
+ U = CR.Lower + 1;
+ } else {
+ L = CR.Upper - 1;
+ }
+ }
+
+ if (Upper.ult(CR.Lower) && Lower.ult(CR.Upper)) {
+ APInt d1 = CR.Lower - Upper, d2 = Lower - CR.Lower;
+
+ if (d1.ult(d2)) {
+ U = CR.Lower + 1;
+ } else {
+ L = CR.Lower;
+ }
+ }
+ }
+
+ if (isWrappedSet() && CR.isWrappedSet()) {
+ if (Lower.ult(CR.Upper) || CR.Lower.ult(Upper))
+ return ConstantRange(getBitWidth());
+
+ if (CR.Upper.ugt(U)) {
+ U = CR.Upper;
+ }
+
+ if (CR.Lower.ult(L)) {
+ L = CR.Lower;
+ }
+
+ if (L == U) return ConstantRange(getBitWidth());
+ }
+
+ return ConstantRange(L, U);
+}
+
+/// zeroExtend - Return a new range in the specified integer type, which must
+/// be strictly larger than the current type. The returned range will
+/// correspond to the possible range of values as if the source range had been
+/// zero extended.
+ConstantRange ConstantRange::zeroExtend(uint32_t DstTySize) const {
+ unsigned SrcTySize = getBitWidth();
+ assert(SrcTySize < DstTySize && "Not a value extension");
+ if (isFullSet())
+ // Change a source full set into [0, 1 << 8*numbytes)
+ return ConstantRange(APInt(DstTySize,0), APInt(DstTySize,1).shl(SrcTySize));
+
+ APInt L = Lower; L.zext(DstTySize);
+ APInt U = Upper; U.zext(DstTySize);
+ return ConstantRange(L, U);
+}
+
+/// truncate - Return a new range in the specified integer type, which must be
+/// strictly smaller than the current type. The returned range will
+/// correspond to the possible range of values as if the source range had been
+/// truncated to the specified type.
+ConstantRange ConstantRange::truncate(uint32_t DstTySize) const {
+ unsigned SrcTySize = getBitWidth();
+ assert(SrcTySize > DstTySize && "Not a value truncation");
+ APInt Size = APInt::getMaxValue(DstTySize).zext(SrcTySize);
+ if (isFullSet() || getSetSize().ugt(Size))
+ return ConstantRange(DstTySize);
+
+ APInt L = Lower; L.trunc(DstTySize);
+ APInt U = Upper; U.trunc(DstTySize);
+ return ConstantRange(L, U);
}
/// print - Print out the bounds to a stream...
///
void ConstantRange::print(std::ostream &OS) const {
- OS << "[" << Lower << "," << Upper << " )";
+ OS << "[" << Lower.toStringSigned(10) << ","
+ << Upper.toStringSigned(10) << " )";
}
/// dump - Allow printing from a debugger easily...
///
void ConstantRange::dump() const {
- print(std::cerr);
+ print(cerr);
}