}
}
+ static inline unsigned getShiftOpcEncoding(ShiftOpc Op) {
+ switch (Op) {
+ default: assert(0 && "Unknown shift opc!");
+ case ARM_AM::asr: return 2;
+ case ARM_AM::lsl: return 0;
+ case ARM_AM::lsr: return 1;
+ case ARM_AM::ror: return 3;
+ }
+ }
+
static inline ShiftOpc getShiftOpcForNode(SDValue N) {
switch (N.getOpcode()) {
default: return ARM_AM::no_shift;
if ((rotr32(Imm, RotAmt) & ~255U) == 0)
return (32-RotAmt)&31; // HW rotates right, not left.
- // For values like 0xF000000F, we should ignore the low 7 bits, then
+ // For values like 0xF000000F, we should ignore the low 6 bits, then
// retry the hunt.
- if (Imm & 127U) {
- unsigned TZ2 = CountTrailingZeros_32(Imm & ~127U);
+ if (Imm & 63U) {
+ unsigned TZ2 = CountTrailingZeros_32(Imm & ~63U);
unsigned RotAmt2 = TZ2 & ~1;
if ((rotr32(Imm, RotAmt2) & ~255U) == 0)
return (32-RotAmt2)&31; // HW rotates right, not left.
//
// The first operand is always a Reg. The second operand is a reg if in
// reg/reg form, otherwise it's reg#0. The third field encodes the operation
- // in bit 12, the immediate in bits 0-11, and the shift op in 13-15.
+ // in bit 12, the immediate in bits 0-11, and the shift op in 13-15. The
+ // fourth operand 16-17 encodes the index mode.
//
// If this addressing mode is a frame index (before prolog/epilog insertion
// and code rewriting), this operand will have the form: FI#, reg0, <offs>
// with no shift amount for the frame offset.
//
- static inline unsigned getAM2Opc(AddrOpc Opc, unsigned Imm12, ShiftOpc SO) {
+ static inline unsigned getAM2Opc(AddrOpc Opc, unsigned Imm12, ShiftOpc SO,
+ unsigned IdxMode = 0) {
assert(Imm12 < (1 << 12) && "Imm too large!");
bool isSub = Opc == sub;
- return Imm12 | ((int)isSub << 12) | (SO << 13);
+ return Imm12 | ((int)isSub << 12) | (SO << 13) | (IdxMode << 16) ;
}
static inline unsigned getAM2Offset(unsigned AM2Opc) {
return AM2Opc & ((1 << 12)-1);
return ((AM2Opc >> 12) & 1) ? sub : add;
}
static inline ShiftOpc getAM2ShiftOpc(unsigned AM2Opc) {
- return (ShiftOpc)(AM2Opc >> 13);
+ return (ShiftOpc)((AM2Opc >> 13) & 7);
+ }
+ static inline unsigned getAM2IdxMode(unsigned AM2Opc) {
+ return (AM2Opc >> 16);
}
//
// The first operand is always a Reg. The second operand is a reg if in
// reg/reg form, otherwise it's reg#0. The third field encodes the operation
- // in bit 8, the immediate in bits 0-7.
+ // in bit 8, the immediate in bits 0-7. The fourth operand 9-10 encodes the
+ // index mode.
/// getAM3Opc - This function encodes the addrmode3 opc field.
- static inline unsigned getAM3Opc(AddrOpc Opc, unsigned char Offset) {
+ static inline unsigned getAM3Opc(AddrOpc Opc, unsigned char Offset,
+ unsigned IdxMode = 0) {
bool isSub = Opc == sub;
- return ((int)isSub << 8) | Offset;
+ return ((int)isSub << 8) | Offset | (IdxMode << 9);
}
static inline unsigned char getAM3Offset(unsigned AM3Opc) {
return AM3Opc & 0xFF;
static inline AddrOpc getAM3Op(unsigned AM3Opc) {
return ((AM3Opc >> 8) & 1) ? sub : add;
}
+ static inline unsigned getAM3IdxMode(unsigned AM3Opc) {
+ return (AM3Opc >> 9);
+ }
//===--------------------------------------------------------------------===//
// Addressing Mode #4
// IB - Increment before
// DA - Decrement after
// DB - Decrement before
+ // For VFP instructions, only the IA and DB modes are valid.
static inline AMSubMode getAM4SubMode(unsigned Mode) {
return (AMSubMode)(Mode & 0x7);
//
// The first operand is always a Reg. The second operand encodes the
// operation in bit 8 and the immediate in bits 0-7.
- //
- // This is also used for FP load/store multiple ops. The second operand
- // encodes the number of registers (or 2 times the number of registers
- // for DPR ops) in bits 0-7. In addition, bits 8-10 encode one of the
- // following two sub-modes:
- //
- // IA - Increment after
- // DB - Decrement before
/// getAM5Opc - This function encodes the addrmode5 opc field.
static inline unsigned getAM5Opc(AddrOpc Opc, unsigned char Offset) {
return ((AM5Opc >> 8) & 1) ? sub : add;
}
- /// getAM5Opc - This function encodes the addrmode5 opc field for VLDM and
- /// VSTM instructions.
- static inline unsigned getAM5Opc(AMSubMode SubMode, unsigned char Offset) {
- assert((SubMode == ia || SubMode == db) &&
- "Illegal addressing mode 5 sub-mode!");
- return ((int)SubMode << 8) | Offset;
- }
- static inline AMSubMode getAM5SubMode(unsigned AM5Opc) {
- return (AMSubMode)((AM5Opc >> 8) & 0x7);
- }
-
//===--------------------------------------------------------------------===//
// Addressing Mode #6
//===--------------------------------------------------------------------===//
//
// This is stored in two operands [regaddr, align]. The first is the
// address register. The second operand is the value of the alignment
- // specifier to use or zero if no explicit alignment.
+ // specifier in bytes or zero if no explicit alignment.
+ // Valid alignments depend on the specific instruction.
+
+ //===--------------------------------------------------------------------===//
+ // NEON Modified Immediates
+ //===--------------------------------------------------------------------===//
+ //
+ // Several NEON instructions (e.g., VMOV) take a "modified immediate"
+ // vector operand, where a small immediate encoded in the instruction
+ // specifies a full NEON vector value. These modified immediates are
+ // represented here as encoded integers. The low 8 bits hold the immediate
+ // value; bit 12 holds the "Op" field of the instruction, and bits 11-8 hold
+ // the "Cmode" field of the instruction. The interfaces below treat the
+ // Op and Cmode values as a single 5-bit value.
+
+ static inline unsigned createNEONModImm(unsigned OpCmode, unsigned Val) {
+ return (OpCmode << 8) | Val;
+ }
+ static inline unsigned getNEONModImmOpCmode(unsigned ModImm) {
+ return (ModImm >> 8) & 0x1f;
+ }
+ static inline unsigned getNEONModImmVal(unsigned ModImm) {
+ return ModImm & 0xff;
+ }
+
+ /// decodeNEONModImm - Decode a NEON modified immediate value into the
+ /// element value and the element size in bits. (If the element size is
+ /// smaller than the vector, it is splatted into all the elements.)
+ static inline uint64_t decodeNEONModImm(unsigned ModImm, unsigned &EltBits) {
+ unsigned OpCmode = getNEONModImmOpCmode(ModImm);
+ unsigned Imm8 = getNEONModImmVal(ModImm);
+ uint64_t Val = 0;
+
+ if (OpCmode == 0xe) {
+ // 8-bit vector elements
+ Val = Imm8;
+ EltBits = 8;
+ } else if ((OpCmode & 0xc) == 0x8) {
+ // 16-bit vector elements
+ unsigned ByteNum = (OpCmode & 0x6) >> 1;
+ Val = Imm8 << (8 * ByteNum);
+ EltBits = 16;
+ } else if ((OpCmode & 0x8) == 0) {
+ // 32-bit vector elements, zero with one byte set
+ unsigned ByteNum = (OpCmode & 0x6) >> 1;
+ Val = Imm8 << (8 * ByteNum);
+ EltBits = 32;
+ } else if ((OpCmode & 0xe) == 0xc) {
+ // 32-bit vector elements, one byte with low bits set
+ unsigned ByteNum = 1 + (OpCmode & 0x1);
+ Val = (Imm8 << (8 * ByteNum)) | (0xffff >> (8 * (2 - ByteNum)));
+ EltBits = 32;
+ } else if (OpCmode == 0x1e) {
+ // 64-bit vector elements
+ for (unsigned ByteNum = 0; ByteNum < 8; ++ByteNum) {
+ if ((ModImm >> ByteNum) & 1)
+ Val |= (uint64_t)0xff << (8 * ByteNum);
+ }
+ EltBits = 64;
+ } else {
+ assert(false && "Unsupported NEON immediate");
+ }
+ return Val;
+ }
+
+ AMSubMode getLoadStoreMultipleSubMode(int Opcode);
} // end namespace ARM_AM
} // end namespace llvm
projects / oota-llvm.git / blobdiff