}
}
-/// FIXME: Works around a gcc miscompilation with -fstrict-aliasing.
-LLVM_ATTRIBUTE_NOINLINE
-static unsigned getNumJTEntries(const std::vector<MachineJumpTableEntry> &JT,
- unsigned JTI);
-static unsigned getNumJTEntries(const std::vector<MachineJumpTableEntry> &JT,
- unsigned JTI) {
- assert(JTI < JT.size());
- return JT[JTI].MBBs.size();
-}
-
/// GetInstSize - Return the size of the specified MachineInstr.
///
unsigned ARMBaseInstrInfo::GetInstSizeInBytes(const MachineInstr *MI) const {
// bytes, we can use 16-bit entries instead. Then there won't be an
// alignment issue.
unsigned InstSize = (Opc == ARM::tBR_JTr || Opc == ARM::t2BR_JT) ? 2 : 4;
- unsigned NumEntries = getNumJTEntries(JT, JTI);
+ unsigned NumEntries = JT[JTI].MBBs.size();
if (Opc == ARM::t2TBB_JT && (NumEntries & 1))
// Make sure the instruction that follows TBB is 2-byte aligned.
// FIXME: Constant island pass should insert an "ALIGN" instruction
++NumEntries;
return NumEntries * EntrySize + InstSize;
}
+ case ARM::SPACE:
+ return MI->getOperand(1).getImm();
}
}
return Size;
}
+void ARMBaseInstrInfo::copyFromCPSR(MachineBasicBlock &MBB,
+ MachineBasicBlock::iterator I,
+ unsigned DestReg, bool KillSrc,
+ const ARMSubtarget &Subtarget) const {
+ unsigned Opc = Subtarget.isThumb()
+ ? (Subtarget.isMClass() ? ARM::t2MRS_M : ARM::t2MRS_AR)
+ : ARM::MRS;
+
+ MachineInstrBuilder MIB =
+ BuildMI(MBB, I, I->getDebugLoc(), get(Opc), DestReg);
+
+ // There is only 1 A/R class MRS instruction, and it always refers to
+ // APSR. However, there are lots of other possibilities on M-class cores.
+ if (Subtarget.isMClass())
+ MIB.addImm(0x800);
+
+ AddDefaultPred(MIB);
+
+ MIB.addReg(ARM::CPSR, RegState::Implicit | getKillRegState(KillSrc));
+}
+
+void ARMBaseInstrInfo::copyToCPSR(MachineBasicBlock &MBB,
+ MachineBasicBlock::iterator I,
+ unsigned SrcReg, bool KillSrc,
+ const ARMSubtarget &Subtarget) const {
+ unsigned Opc = Subtarget.isThumb()
+ ? (Subtarget.isMClass() ? ARM::t2MSR_M : ARM::t2MSR_AR)
+ : ARM::MSR;
+
+ MachineInstrBuilder MIB = BuildMI(MBB, I, I->getDebugLoc(), get(Opc));
+
+ if (Subtarget.isMClass())
+ MIB.addImm(0x800);
+ else
+ MIB.addImm(8);
+
+ MIB.addReg(SrcReg, getKillRegState(KillSrc));
+
+ AddDefaultPred(MIB);
+
+ MIB.addReg(ARM::CPSR, RegState::Implicit | RegState::Define);
+}
+
void ARMBaseInstrInfo::copyPhysReg(MachineBasicBlock &MBB,
MachineBasicBlock::iterator I, DebugLoc DL,
unsigned DestReg, unsigned SrcReg,
Opc = ARM::VMOVRS;
else if (SPRDest && GPRSrc)
Opc = ARM::VMOVSR;
- else if (ARM::DPRRegClass.contains(DestReg, SrcReg))
+ else if (ARM::DPRRegClass.contains(DestReg, SrcReg) && !Subtarget.isFPOnlySP())
Opc = ARM::VMOVD;
else if (ARM::QPRRegClass.contains(DestReg, SrcReg))
Opc = ARM::VORRq;
BeginIdx = ARM::dsub_0;
SubRegs = 4;
Spacing = 2;
+ } else if (ARM::DPRRegClass.contains(DestReg, SrcReg) && Subtarget.isFPOnlySP()) {
+ Opc = ARM::VMOVS;
+ BeginIdx = ARM::ssub_0;
+ SubRegs = 2;
+ } else if (SrcReg == ARM::CPSR) {
+ copyFromCPSR(MBB, I, DestReg, KillSrc, Subtarget);
+ return;
+ } else if (DestReg == ARM::CPSR) {
+ copyToCPSR(MBB, I, SrcReg, KillSrc, Subtarget);
+ return;
}
assert(Opc && "Impossible reg-to-reg copy");
// copyPhysReg() calls. Look for VMOVS instructions that can legally be
// widened to VMOVD. We prefer the VMOVD when possible because it may be
// changed into a VORR that can go down the NEON pipeline.
- if (!WidenVMOVS || !MI->isCopy() || Subtarget.isCortexA15())
+ if (!WidenVMOVS || !MI->isCopy() || Subtarget.isCortexA15() ||
+ Subtarget.isFPOnlySP())
return false;
// Look for a copy between even S-registers. That is where we keep floats
return false;
}
-MachineInstr *ARMBaseInstrInfo::optimizeSelect(MachineInstr *MI,
- bool PreferFalse) const {
+MachineInstr *
+ARMBaseInstrInfo::optimizeSelect(MachineInstr *MI,
+ SmallPtrSetImpl<MachineInstr *> &SeenMIs,
+ bool PreferFalse) const {
assert((MI->getOpcode() == ARM::MOVCCr || MI->getOpcode() == ARM::t2MOVCCr) &&
"Unknown select instruction");
MachineRegisterInfo &MRI = MI->getParent()->getParent()->getRegInfo();
NewMI.addOperand(FalseReg);
NewMI->tieOperands(0, NewMI->getNumOperands() - 1);
+ // Update SeenMIs set: register newly created MI and erase removed DefMI.
+ SeenMIs.insert(NewMI);
+ SeenMIs.erase(DefMI);
+
// The caller will erase MI, but not DefMI.
DefMI->eraseFromParent();
return NewMI;
unsigned NumBytes) {
// This optimisation potentially adds lots of load and store
// micro-operations, it's only really a great benefit to code-size.
- if (!MF.getFunction()->getAttributes().hasAttribute(
- AttributeSet::FunctionIndex, Attribute::MinSize))
+ if (!MF.getFunction()->hasFnAttribute(Attribute::MinSize))
return false;
// If only one register is pushed/popped, LLVM can use an LDR/STR
else if (MI->getParent() != CmpInstr->getParent() || CmpValue != 0) {
// Conservatively refuse to convert an instruction which isn't in the same
// BB as the comparison.
- // For CMPri, we need to check Sub, thus we can't return here.
+ // For CMPri w/ CmpValue != 0, a Sub may still be a candidate.
+ // Thus we cannot return here.
if (CmpInstr->getOpcode() == ARM::CMPri ||
CmpInstr->getOpcode() == ARM::t2CMPri)
MI = nullptr;
case ARM::t2EORrr:
case ARM::t2EORri: {
// Scan forward for the use of CPSR
- // When checking against MI: if it's a conditional code requires
- // checking of V bit, then this is not safe to do.
+ // When checking against MI: if it's a conditional code that requires
+ // checking of the V bit or C bit, then this is not safe to do.
// It is safe to remove CmpInstr if CPSR is redefined or killed.
// If we are done with the basic block, we need to check whether CPSR is
// live-out.
OperandsToUpdate.push_back(
std::make_pair(&((*I).getOperand(IO - 1)), NewCC));
}
- } else
+ } else {
+ // No Sub, so this is x = <op> y, z; cmp x, 0.
switch (CC) {
- default:
+ case ARMCC::EQ: // Z
+ case ARMCC::NE: // Z
+ case ARMCC::MI: // N
+ case ARMCC::PL: // N
+ case ARMCC::AL: // none
// CPSR can be used multiple times, we should continue.
break;
- case ARMCC::VS:
- case ARMCC::VC:
- case ARMCC::GE:
- case ARMCC::LT:
- case ARMCC::GT:
- case ARMCC::LE:
+ case ARMCC::HS: // C
+ case ARMCC::LO: // C
+ case ARMCC::VS: // V
+ case ARMCC::VC: // V
+ case ARMCC::HI: // C Z
+ case ARMCC::LS: // C Z
+ case ARMCC::GE: // N V
+ case ARMCC::LT: // N V
+ case ARMCC::GT: // Z N V
+ case ARMCC::LE: // Z N V
+ // The instruction uses the V bit or C bit which is not safe.
return false;
}
+ }
}
}
// FIXME: The current MachineInstr design does not support relying on machine
// mem operands to determine the width of a memory access. Instead, we expect
// the target to provide this information based on the instruction opcode and
-// operands. However, using MachineMemOperand is a the best solution now for
+// operands. However, using MachineMemOperand is the best solution now for
// two reasons:
//
// 1) getNumMicroOps tries to infer LDM memory width from the total number of MI
// instructions).
if (Latency > 0 && Subtarget.isThumb2()) {
const MachineFunction *MF = DefMI->getParent()->getParent();
- if (MF->getFunction()->getAttributes().
- hasAttribute(AttributeSet::FunctionIndex,
- Attribute::OptimizeForSize))
+ if (MF->getFunction()->hasFnAttribute(Attribute::OptimizeForSize))
--Latency;
}
return Latency;
MI->addRegisterKilled(DReg, TRI, true);
}
-void ARMBaseInstrInfo::getUnconditionalBranch(
- MCInst &Branch, const MCSymbolRefExpr *BranchTarget) const {
- if (Subtarget.isThumb())
- Branch.setOpcode(ARM::tB);
- else if (Subtarget.isThumb2())
- Branch.setOpcode(ARM::t2B);
- else
- Branch.setOpcode(ARM::Bcc);
-
- Branch.addOperand(MCOperand::CreateExpr(BranchTarget));
- Branch.addOperand(MCOperand::CreateImm(ARMCC::AL));
- Branch.addOperand(MCOperand::CreateReg(0));
-}
-
-void ARMBaseInstrInfo::getTrap(MCInst &MI) const {
- if (Subtarget.isThumb())
- MI.setOpcode(ARM::tTRAP);
- else if (Subtarget.useNaClTrap())
- MI.setOpcode(ARM::TRAPNaCl);
- else
- MI.setOpcode(ARM::TRAP);
-}
-
bool ARMBaseInstrInfo::hasNOP() const {
return (Subtarget.getFeatureBits() & ARM::HasV6T2Ops) != 0;
}
return false;
}
+
+bool ARMBaseInstrInfo::getRegSequenceLikeInputs(
+ const MachineInstr &MI, unsigned DefIdx,
+ SmallVectorImpl<RegSubRegPairAndIdx> &InputRegs) const {
+ assert(DefIdx < MI.getDesc().getNumDefs() && "Invalid definition index");
+ assert(MI.isRegSequenceLike() && "Invalid kind of instruction");
+
+ switch (MI.getOpcode()) {
+ case ARM::VMOVDRR:
+ // dX = VMOVDRR rY, rZ
+ // is the same as:
+ // dX = REG_SEQUENCE rY, ssub_0, rZ, ssub_1
+ // Populate the InputRegs accordingly.
+ // rY
+ const MachineOperand *MOReg = &MI.getOperand(1);
+ InputRegs.push_back(
+ RegSubRegPairAndIdx(MOReg->getReg(), MOReg->getSubReg(), ARM::ssub_0));
+ // rZ
+ MOReg = &MI.getOperand(2);
+ InputRegs.push_back(
+ RegSubRegPairAndIdx(MOReg->getReg(), MOReg->getSubReg(), ARM::ssub_1));
+ return true;
+ }
+ llvm_unreachable("Target dependent opcode missing");
+}
+
+bool ARMBaseInstrInfo::getExtractSubregLikeInputs(
+ const MachineInstr &MI, unsigned DefIdx,
+ RegSubRegPairAndIdx &InputReg) const {
+ assert(DefIdx < MI.getDesc().getNumDefs() && "Invalid definition index");
+ assert(MI.isExtractSubregLike() && "Invalid kind of instruction");
+
+ switch (MI.getOpcode()) {
+ case ARM::VMOVRRD:
+ // rX, rY = VMOVRRD dZ
+ // is the same as:
+ // rX = EXTRACT_SUBREG dZ, ssub_0
+ // rY = EXTRACT_SUBREG dZ, ssub_1
+ const MachineOperand &MOReg = MI.getOperand(2);
+ InputReg.Reg = MOReg.getReg();
+ InputReg.SubReg = MOReg.getSubReg();
+ InputReg.SubIdx = DefIdx == 0 ? ARM::ssub_0 : ARM::ssub_1;
+ return true;
+ }
+ llvm_unreachable("Target dependent opcode missing");
+}
+
+bool ARMBaseInstrInfo::getInsertSubregLikeInputs(
+ const MachineInstr &MI, unsigned DefIdx, RegSubRegPair &BaseReg,
+ RegSubRegPairAndIdx &InsertedReg) const {
+ assert(DefIdx < MI.getDesc().getNumDefs() && "Invalid definition index");
+ assert(MI.isInsertSubregLike() && "Invalid kind of instruction");
+
+ switch (MI.getOpcode()) {
+ case ARM::VSETLNi32:
+ // dX = VSETLNi32 dY, rZ, imm
+ const MachineOperand &MOBaseReg = MI.getOperand(1);
+ const MachineOperand &MOInsertedReg = MI.getOperand(2);
+ const MachineOperand &MOIndex = MI.getOperand(3);
+ BaseReg.Reg = MOBaseReg.getReg();
+ BaseReg.SubReg = MOBaseReg.getSubReg();
+
+ InsertedReg.Reg = MOInsertedReg.getReg();
+ InsertedReg.SubReg = MOInsertedReg.getSubReg();
+ InsertedReg.SubIdx = MOIndex.getImm() == 0 ? ARM::ssub_0 : ARM::ssub_1;
+ return true;
+ }
+ llvm_unreachable("Target dependent opcode missing");
+}
projects / oota-llvm.git / blobdiff