#define DEBUG_TYPE "arm-cp-islands"
#include "ARM.h"
#include "ARMMachineFunctionInfo.h"
-#include "ARMInstrInfo.h"
-#include "Thumb2InstrInfo.h"
#include "MCTargetDesc/ARMAddressingModes.h"
+#include "Thumb2InstrInfo.h"
+#include "llvm/ADT/STLExtras.h"
+#include "llvm/ADT/SmallSet.h"
+#include "llvm/ADT/SmallVector.h"
+#include "llvm/ADT/Statistic.h"
#include "llvm/CodeGen/MachineConstantPool.h"
#include "llvm/CodeGen/MachineFunctionPass.h"
#include "llvm/CodeGen/MachineJumpTableInfo.h"
-#include "llvm/Target/TargetData.h"
-#include "llvm/Target/TargetMachine.h"
+#include "llvm/CodeGen/MachineRegisterInfo.h"
+#include "llvm/DataLayout.h"
+#include "llvm/Support/CommandLine.h"
#include "llvm/Support/Debug.h"
#include "llvm/Support/ErrorHandling.h"
#include "llvm/Support/Format.h"
#include "llvm/Support/raw_ostream.h"
-#include "llvm/ADT/SmallSet.h"
-#include "llvm/ADT/SmallVector.h"
-#include "llvm/ADT/STLExtras.h"
-#include "llvm/ADT/Statistic.h"
-#include "llvm/Support/CommandLine.h"
+#include "llvm/Target/TargetMachine.h"
#include <algorithm>
using namespace llvm;
return 0;
}
-/// WorstCaseAlign - Assuming only the low KnownBits bits in Offset are exact,
-/// add padding such that:
-///
-/// 1. The result is aligned to 1 << LogAlign.
-///
-/// 2. No other value of the unknown bits would require more padding.
-///
-/// This may add more padding than is required to satisfy just one of the
-/// constraints. It is necessary to compute alignment this way to guarantee
-/// that we don't underestimate the padding before an aligned block. If the
-/// real padding before a block is larger than we think, constant pool entries
-/// may go out of range.
-static inline unsigned WorstCaseAlign(unsigned Offset, unsigned LogAlign,
- unsigned KnownBits) {
- // Add the worst possible padding that the unknown bits could cause.
- Offset += UnknownPadding(LogAlign, KnownBits);
-
- // Then align the result.
- return RoundUpToAlignment(Offset, 1u << LogAlign);
-}
-
namespace {
/// ARMConstantIslands - Due to limited PC-relative displacements, ARM
/// requires constant pool entries to be scattered among the instructions
/// Offset - Distance from the beginning of the function to the beginning
/// of this basic block.
///
- /// The offset is always aligned as required by the basic block.
+ /// Offsets are computed assuming worst case padding before an aligned
+ /// block. This means that subtracting basic block offsets always gives a
+ /// conservative estimate of the real distance which may be smaller.
+ ///
+ /// Because worst case padding is used, the computed offset of an aligned
+ /// block may not actually be aligned.
unsigned Offset;
/// Size - Size of the basic block in bytes. If the block contains
/// This number should be used to predict worst case padding when
/// splitting the block.
unsigned internalKnownBits() const {
- return Unalign ? Unalign : KnownBits;
+ unsigned Bits = Unalign ? Unalign : KnownBits;
+ // If the block size isn't a multiple of the known bits, assume the
+ // worst case padding.
+ if (Size & ((1u << Bits) - 1))
+ Bits = CountTrailingZeros_32(Size);
+ return Bits;
}
/// Compute the offset immediately following this block. If LogAlign is
if (!LA)
return PO;
// Add alignment padding from the terminator.
- return WorstCaseAlign(PO, LA, internalKnownBits());
+ return PO + UnknownPadding(LA, internalKnownBits());
}
/// Compute the number of known low bits of postOffset. If this block
}
/// getMaxDisp - Returns the maximum displacement supported by MI.
/// Correct for unknown alignment.
+ /// Conservatively subtract 2 bytes to handle weird alignment effects.
unsigned getMaxDisp() const {
- return KnownAlignment ? MaxDisp : MaxDisp - 2;
+ return (KnownAlignment ? MaxDisp : MaxDisp - 2) - 2;
}
};
MachineFunction *MF;
MachineConstantPool *MCP;
- const ARMInstrInfo *TII;
+ const ARMBaseInstrInfo *TII;
const ARMSubtarget *STI;
ARMFunctionInfo *AFI;
bool isThumb;
}
private:
- void DoInitialPlacement(std::vector<MachineInstr*> &CPEMIs);
+ void doInitialPlacement(std::vector<MachineInstr*> &CPEMIs);
CPEntry *findConstPoolEntry(unsigned CPI, const MachineInstr *CPEMI);
unsigned getCPELogAlign(const MachineInstr *CPEMI);
- void JumpTableFunctionScan();
- void InitialFunctionScan(const std::vector<MachineInstr*> &CPEMIs);
- MachineBasicBlock *SplitBlockBeforeInstr(MachineInstr *MI);
- void UpdateForInsertedWaterBlock(MachineBasicBlock *NewBB);
- void AdjustBBOffsetsAfter(MachineBasicBlock *BB);
- bool DecrementOldEntry(unsigned CPI, MachineInstr* CPEMI);
- int LookForExistingCPEntry(CPUser& U, unsigned UserOffset);
- bool LookForWater(CPUser&U, unsigned UserOffset, water_iterator &WaterIter);
- void CreateNewWater(unsigned CPUserIndex, unsigned UserOffset,
+ void scanFunctionJumpTables();
+ void initializeFunctionInfo(const std::vector<MachineInstr*> &CPEMIs);
+ MachineBasicBlock *splitBlockBeforeInstr(MachineInstr *MI);
+ void updateForInsertedWaterBlock(MachineBasicBlock *NewBB);
+ void adjustBBOffsetsAfter(MachineBasicBlock *BB);
+ bool decrementCPEReferenceCount(unsigned CPI, MachineInstr* CPEMI);
+ int findInRangeCPEntry(CPUser& U, unsigned UserOffset);
+ bool findAvailableWater(CPUser&U, unsigned UserOffset,
+ water_iterator &WaterIter);
+ void createNewWater(unsigned CPUserIndex, unsigned UserOffset,
MachineBasicBlock *&NewMBB);
- bool HandleConstantPoolUser(unsigned CPUserIndex);
- void RemoveDeadCPEMI(MachineInstr *CPEMI);
- bool RemoveUnusedCPEntries();
- bool CPEIsInRange(MachineInstr *MI, unsigned UserOffset,
- MachineInstr *CPEMI, unsigned Disp, bool NegOk,
- bool DoDump = false);
- bool WaterIsInRange(unsigned UserOffset, MachineBasicBlock *Water,
+ bool handleConstantPoolUser(unsigned CPUserIndex);
+ void removeDeadCPEMI(MachineInstr *CPEMI);
+ bool removeUnusedCPEntries();
+ bool isCPEntryInRange(MachineInstr *MI, unsigned UserOffset,
+ MachineInstr *CPEMI, unsigned Disp, bool NegOk,
+ bool DoDump = false);
+ bool isWaterInRange(unsigned UserOffset, MachineBasicBlock *Water,
CPUser &U, unsigned &Growth);
- bool BBIsInRange(MachineInstr *MI, MachineBasicBlock *BB, unsigned Disp);
- bool FixUpImmediateBr(ImmBranch &Br);
- bool FixUpConditionalBr(ImmBranch &Br);
- bool FixUpUnconditionalBr(ImmBranch &Br);
- bool UndoLRSpillRestore();
+ bool isBBInRange(MachineInstr *MI, MachineBasicBlock *BB, unsigned Disp);
+ bool fixupImmediateBr(ImmBranch &Br);
+ bool fixupConditionalBr(ImmBranch &Br);
+ bool fixupUnconditionalBr(ImmBranch &Br);
+ bool undoLRSpillRestore();
bool mayOptimizeThumb2Instruction(const MachineInstr *MI) const;
- bool OptimizeThumb2Instructions();
- bool OptimizeThumb2Branches();
- bool ReorderThumb2JumpTables();
- bool OptimizeThumb2JumpTables();
- MachineBasicBlock *AdjustJTTargetBlockForward(MachineBasicBlock *BB,
+ bool optimizeThumb2Instructions();
+ bool optimizeThumb2Branches();
+ bool reorderThumb2JumpTables();
+ bool optimizeThumb2JumpTables();
+ MachineBasicBlock *adjustJTTargetBlockForward(MachineBasicBlock *BB,
MachineBasicBlock *JTBB);
- void ComputeBlockSize(MachineBasicBlock *MBB);
- unsigned GetOffsetOf(MachineInstr *MI) const;
- unsigned GetUserOffset(CPUser&) const;
+ void computeBlockSize(MachineBasicBlock *MBB);
+ unsigned getOffsetOf(MachineInstr *MI) const;
+ unsigned getUserOffset(CPUser&) const;
void dumpBBs();
void verify();
- bool OffsetIsInRange(unsigned UserOffset, unsigned TrialOffset,
+ bool isOffsetInRange(unsigned UserOffset, unsigned TrialOffset,
unsigned Disp, bool NegativeOK, bool IsSoImm = false);
- bool OffsetIsInRange(unsigned UserOffset, unsigned TrialOffset,
+ bool isOffsetInRange(unsigned UserOffset, unsigned TrialOffset,
const CPUser &U) {
- return OffsetIsInRange(UserOffset, TrialOffset,
+ return isOffsetInRange(UserOffset, TrialOffset,
U.getMaxDisp(), U.NegOk, U.IsSoImm);
}
};
for (MachineFunction::iterator MBBI = MF->begin(), E = MF->end();
MBBI != E; ++MBBI) {
MachineBasicBlock *MBB = MBBI;
- unsigned Align = MBB->getAlignment();
unsigned MBBId = MBB->getNumber();
- assert(BBInfo[MBBId].Offset % (1u << Align) == 0);
assert(!MBBId || BBInfo[MBBId - 1].postOffset() <= BBInfo[MBBId].Offset);
}
+ DEBUG(dbgs() << "Verifying " << CPUsers.size() << " CP users.\n");
for (unsigned i = 0, e = CPUsers.size(); i != e; ++i) {
CPUser &U = CPUsers[i];
- unsigned UserOffset = GetUserOffset(U);
- assert(CPEIsInRange(U.MI, UserOffset, U.CPEMI, U.getMaxDisp(), U.NegOk) &&
- "Constant pool entry out of range!");
+ unsigned UserOffset = getUserOffset(U);
+ // Verify offset using the real max displacement without the safety
+ // adjustment.
+ if (isCPEntryInRange(U.MI, UserOffset, U.CPEMI, U.getMaxDisp()+2, U.NegOk,
+ /* DoDump = */ true)) {
+ DEBUG(dbgs() << "OK\n");
+ continue;
+ }
+ DEBUG(dbgs() << "Out of range.\n");
+ dumpBBs();
+ DEBUG(MF->dump());
+ llvm_unreachable("Constant pool entry out of range!");
}
#endif
}
<< MCP->getConstants().size() << " CP entries, aligned to "
<< MCP->getConstantPoolAlignment() << " bytes *****\n");
- TII = (const ARMInstrInfo*)MF->getTarget().getInstrInfo();
+ TII = (const ARMBaseInstrInfo*)MF->getTarget().getInstrInfo();
AFI = MF->getInfo<ARMFunctionInfo>();
STI = &MF->getTarget().getSubtarget<ARMSubtarget>();
HasFarJump = false;
+ // This pass invalidates liveness information when it splits basic blocks.
+ MF->getRegInfo().invalidateLiveness();
+
// Renumber all of the machine basic blocks in the function, guaranteeing that
// the numbers agree with the position of the block in the function.
MF->RenumberBlocks();
// of the TB[BH] instructions.
bool MadeChange = false;
if (isThumb2 && AdjustJumpTableBlocks) {
- JumpTableFunctionScan();
- MadeChange |= ReorderThumb2JumpTables();
+ scanFunctionJumpTables();
+ MadeChange |= reorderThumb2JumpTables();
// Data is out of date, so clear it. It'll be re-computed later.
T2JumpTables.clear();
// Blocks may have shifted around. Keep the numbering up to date.
// ARM and Thumb2 functions need to be 4-byte aligned.
if (!isThumb1)
- MF->EnsureAlignment(2); // 2 = log2(4)
+ MF->ensureAlignment(2); // 2 = log2(4)
// Perform the initial placement of the constant pool entries. To start with,
// we put them all at the end of the function.
std::vector<MachineInstr*> CPEMIs;
if (!MCP->isEmpty())
- DoInitialPlacement(CPEMIs);
+ doInitialPlacement(CPEMIs);
/// The next UID to take is the first unused one.
AFI->initPICLabelUId(CPEMIs.size());
// Do the initial scan of the function, building up information about the
// sizes of each block, the location of all the water, and finding all of the
// constant pool users.
- InitialFunctionScan(CPEMIs);
+ initializeFunctionInfo(CPEMIs);
CPEMIs.clear();
DEBUG(dumpBBs());
/// Remove dead constant pool entries.
- MadeChange |= RemoveUnusedCPEntries();
+ MadeChange |= removeUnusedCPEntries();
// Iteratively place constant pool entries and fix up branches until there
// is no change.
DEBUG(dbgs() << "Beginning CP iteration #" << NoCPIters << '\n');
bool CPChange = false;
for (unsigned i = 0, e = CPUsers.size(); i != e; ++i)
- CPChange |= HandleConstantPoolUser(i);
+ CPChange |= handleConstantPoolUser(i);
if (CPChange && ++NoCPIters > 30)
report_fatal_error("Constant Island pass failed to converge!");
DEBUG(dumpBBs());
DEBUG(dbgs() << "Beginning BR iteration #" << NoBRIters << '\n');
bool BRChange = false;
for (unsigned i = 0, e = ImmBranches.size(); i != e; ++i)
- BRChange |= FixUpImmediateBr(ImmBranches[i]);
+ BRChange |= fixupImmediateBr(ImmBranches[i]);
if (BRChange && ++NoBRIters > 30)
report_fatal_error("Branch Fix Up pass failed to converge!");
DEBUG(dumpBBs());
// Shrink 32-bit Thumb2 branch, load, and store instructions.
if (isThumb2 && !STI->prefers32BitThumb())
- MadeChange |= OptimizeThumb2Instructions();
+ MadeChange |= optimizeThumb2Instructions();
// After a while, this might be made debug-only, but it is not expensive.
verify();
// If LR has been forced spilled and no far jump (i.e. BL) has been issued,
// undo the spill / restore of LR if possible.
if (isThumb && !HasFarJump && AFI->isLRSpilledForFarJump())
- MadeChange |= UndoLRSpillRestore();
+ MadeChange |= undoLRSpillRestore();
// Save the mapping between original and cloned constpool entries.
for (unsigned i = 0, e = CPEntries.size(); i != e; ++i) {
return MadeChange;
}
-/// DoInitialPlacement - Perform the initial placement of the constant pool
+/// doInitialPlacement - Perform the initial placement of the constant pool
/// entries. To start with, we put them all at the end of the function.
void
-ARMConstantIslands::DoInitialPlacement(std::vector<MachineInstr*> &CPEMIs) {
+ARMConstantIslands::doInitialPlacement(std::vector<MachineInstr*> &CPEMIs) {
// Create the basic block to hold the CPE's.
MachineBasicBlock *BB = MF->CreateMachineBasicBlock();
MF->push_back(BB);
// The function needs to be as aligned as the basic blocks. The linker may
// move functions around based on their alignment.
- MF->EnsureAlignment(BB->getAlignment());
+ MF->ensureAlignment(BB->getAlignment());
// Order the entries in BB by descending alignment. That ensures correct
// alignment of all entries as long as BB is sufficiently aligned. Keep
// identity mapping of CPI's to CPE's.
const std::vector<MachineConstantPoolEntry> &CPs = MCP->getConstants();
- const TargetData &TD = *MF->getTarget().getTargetData();
+ const DataLayout &TD = *MF->getTarget().getDataLayout();
for (unsigned i = 0, e = CPs.size(); i != e; ++i) {
unsigned Size = TD.getTypeAllocSize(CPs[i].getType());
assert(Size >= 4 && "Too small constant pool entry");
return Log2_32(Align);
}
-/// JumpTableFunctionScan - Do a scan of the function, building up
+/// scanFunctionJumpTables - Do a scan of the function, building up
/// information about the sizes of each block and the locations of all
/// the jump tables.
-void ARMConstantIslands::JumpTableFunctionScan() {
+void ARMConstantIslands::scanFunctionJumpTables() {
for (MachineFunction::iterator MBBI = MF->begin(), E = MF->end();
MBBI != E; ++MBBI) {
MachineBasicBlock &MBB = *MBBI;
}
}
-/// InitialFunctionScan - Do the initial scan of the function, building up
+/// initializeFunctionInfo - Do the initial scan of the function, building up
/// information about the sizes of each block, the location of all the water,
/// and finding all of the constant pool users.
void ARMConstantIslands::
-InitialFunctionScan(const std::vector<MachineInstr*> &CPEMIs) {
+initializeFunctionInfo(const std::vector<MachineInstr*> &CPEMIs) {
BBInfo.clear();
BBInfo.resize(MF->getNumBlockIDs());
// alignment assumptions, as we don't know for sure the size of any
// instructions in the inline assembly.
for (MachineFunction::iterator I = MF->begin(), E = MF->end(); I != E; ++I)
- ComputeBlockSize(I);
+ computeBlockSize(I);
// The known bits of the entry block offset are determined by the function
// alignment.
BBInfo.front().KnownBits = MF->getAlignment();
// Compute block offsets and known bits.
- AdjustBBOffsetsAfter(MF->begin());
+ adjustBBOffsetsAfter(MF->begin());
// Now go back through the instructions and build up our data structures.
for (MachineFunction::iterator MBBI = MF->begin(), E = MF->end();
}
}
-/// ComputeBlockSize - Compute the size and some alignment information for MBB.
+/// computeBlockSize - Compute the size and some alignment information for MBB.
/// This function updates BBInfo directly.
-void ARMConstantIslands::ComputeBlockSize(MachineBasicBlock *MBB) {
+void ARMConstantIslands::computeBlockSize(MachineBasicBlock *MBB) {
BasicBlockInfo &BBI = BBInfo[MBB->getNumber()];
BBI.Size = 0;
BBI.Unalign = 0;
// tBR_JTr contains a .align 2 directive.
if (!MBB->empty() && MBB->back().getOpcode() == ARM::tBR_JTr) {
BBI.PostAlign = 2;
- MBB->getParent()->EnsureAlignment(2);
+ MBB->getParent()->ensureAlignment(2);
}
}
-/// GetOffsetOf - Return the current offset of the specified machine instruction
+/// getOffsetOf - Return the current offset of the specified machine instruction
/// from the start of the function. This offset changes as stuff is moved
/// around inside the function.
-unsigned ARMConstantIslands::GetOffsetOf(MachineInstr *MI) const {
+unsigned ARMConstantIslands::getOffsetOf(MachineInstr *MI) const {
MachineBasicBlock *MBB = MI->getParent();
// The offset is composed of two things: the sum of the sizes of all MBB's
return LHS->getNumber() < RHS->getNumber();
}
-/// UpdateForInsertedWaterBlock - When a block is newly inserted into the
+/// updateForInsertedWaterBlock - When a block is newly inserted into the
/// machine function, it upsets all of the block numbers. Renumber the blocks
/// and update the arrays that parallel this numbering.
-void ARMConstantIslands::UpdateForInsertedWaterBlock(MachineBasicBlock *NewBB) {
+void ARMConstantIslands::updateForInsertedWaterBlock(MachineBasicBlock *NewBB) {
// Renumber the MBB's to keep them consecutive.
NewBB->getParent()->RenumberBlocks(NewBB);
/// Split the basic block containing MI into two blocks, which are joined by
/// an unconditional branch. Update data structures and renumber blocks to
/// account for this change and returns the newly created block.
-MachineBasicBlock *ARMConstantIslands::SplitBlockBeforeInstr(MachineInstr *MI) {
+MachineBasicBlock *ARMConstantIslands::splitBlockBeforeInstr(MachineInstr *MI) {
MachineBasicBlock *OrigBB = MI->getParent();
// Create a new MBB for the code after the OrigBB.
OrigBB->addSuccessor(NewBB);
// Update internal data structures to account for the newly inserted MBB.
- // This is almost the same as UpdateForInsertedWaterBlock, except that
+ // This is almost the same as updateForInsertedWaterBlock, except that
// the Water goes after OrigBB, not NewBB.
MF->RenumberBlocks(NewBB);
// the new jump we added. (It should be possible to do this without
// recounting everything, but it's very confusing, and this is rarely
// executed.)
- ComputeBlockSize(OrigBB);
+ computeBlockSize(OrigBB);
// Figure out how large the NewMBB is. As the second half of the original
// block, it may contain a tablejump.
- ComputeBlockSize(NewBB);
+ computeBlockSize(NewBB);
// All BBOffsets following these blocks must be modified.
- AdjustBBOffsetsAfter(OrigBB);
+ adjustBBOffsetsAfter(OrigBB);
return NewBB;
}
-/// GetUserOffset - Compute the offset of U.MI as seen by the hardware
+/// getUserOffset - Compute the offset of U.MI as seen by the hardware
/// displacement computation. Update U.KnownAlignment to match its current
/// basic block location.
-unsigned ARMConstantIslands::GetUserOffset(CPUser &U) const {
- unsigned UserOffset = GetOffsetOf(U.MI);
+unsigned ARMConstantIslands::getUserOffset(CPUser &U) const {
+ unsigned UserOffset = getOffsetOf(U.MI);
const BasicBlockInfo &BBI = BBInfo[U.MI->getParent()->getNumber()];
unsigned KnownBits = BBI.internalKnownBits();
return UserOffset;
}
-/// OffsetIsInRange - Checks whether UserOffset (the location of a constant pool
+/// isOffsetInRange - Checks whether UserOffset (the location of a constant pool
/// reference) is within MaxDisp of TrialOffset (a proposed location of a
/// constant pool entry).
-/// UserOffset is computed by GetUserOffset above to include PC adjustments. If
+/// UserOffset is computed by getUserOffset above to include PC adjustments. If
/// the mod 4 alignment of UserOffset is not known, the uncertainty must be
/// subtracted from MaxDisp instead. CPUser::getMaxDisp() does that.
-bool ARMConstantIslands::OffsetIsInRange(unsigned UserOffset,
+bool ARMConstantIslands::isOffsetInRange(unsigned UserOffset,
unsigned TrialOffset, unsigned MaxDisp,
bool NegativeOK, bool IsSoImm) {
if (UserOffset <= TrialOffset) {
return false;
}
-/// WaterIsInRange - Returns true if a CPE placed after the specified
+/// isWaterInRange - Returns true if a CPE placed after the specified
/// Water (a basic block) will be in range for the specific MI.
///
/// Compute how much the function will grow by inserting a CPE after Water.
-bool ARMConstantIslands::WaterIsInRange(unsigned UserOffset,
+bool ARMConstantIslands::isWaterInRange(unsigned UserOffset,
MachineBasicBlock* Water, CPUser &U,
unsigned &Growth) {
unsigned CPELogAlign = getCPELogAlign(U.CPEMI);
Growth += OffsetToAlignment(CPEEnd, 1u << NextBlockAlignment);
// If the CPE is to be inserted before the instruction, that will raise
- // the offset of the instruction. Also account for unknown alignment padding
+ // the offset of the instruction. Also account for unknown alignment padding
// in blocks between CPE and the user.
if (CPEOffset < UserOffset)
UserOffset += Growth + UnknownPadding(MF->getAlignment(), CPELogAlign);
// CPE fits in existing padding.
Growth = 0;
- return OffsetIsInRange(UserOffset, CPEOffset, U);
+ return isOffsetInRange(UserOffset, CPEOffset, U);
}
-/// CPEIsInRange - Returns true if the distance between specific MI and
+/// isCPEntryInRange - Returns true if the distance between specific MI and
/// specific ConstPool entry instruction can fit in MI's displacement field.
-bool ARMConstantIslands::CPEIsInRange(MachineInstr *MI, unsigned UserOffset,
+bool ARMConstantIslands::isCPEntryInRange(MachineInstr *MI, unsigned UserOffset,
MachineInstr *CPEMI, unsigned MaxDisp,
bool NegOk, bool DoDump) {
- unsigned CPEOffset = GetOffsetOf(CPEMI);
- assert(CPEOffset % 4 == 0 && "Misaligned CPE");
+ unsigned CPEOffset = getOffsetOf(CPEMI);
if (DoDump) {
DEBUG({
});
}
- return OffsetIsInRange(UserOffset, CPEOffset, MaxDisp, NegOk);
+ return isOffsetInRange(UserOffset, CPEOffset, MaxDisp, NegOk);
}
#ifndef NDEBUG
}
#endif // NDEBUG
-void ARMConstantIslands::AdjustBBOffsetsAfter(MachineBasicBlock *BB) {
+void ARMConstantIslands::adjustBBOffsetsAfter(MachineBasicBlock *BB) {
unsigned BBNum = BB->getNumber();
for(unsigned i = BBNum + 1, e = MF->getNumBlockIDs(); i < e; ++i) {
// Get the offset and known bits at the end of the layout predecessor.
}
}
-/// DecrementOldEntry - find the constant pool entry with index CPI
+/// decrementCPEReferenceCount - find the constant pool entry with index CPI
/// and instruction CPEMI, and decrement its refcount. If the refcount
/// becomes 0 remove the entry and instruction. Returns true if we removed
/// the entry, false if we didn't.
-bool ARMConstantIslands::DecrementOldEntry(unsigned CPI, MachineInstr *CPEMI) {
+bool ARMConstantIslands::decrementCPEReferenceCount(unsigned CPI,
+ MachineInstr *CPEMI) {
// Find the old entry. Eliminate it if it is no longer used.
CPEntry *CPE = findConstPoolEntry(CPI, CPEMI);
assert(CPE && "Unexpected!");
if (--CPE->RefCount == 0) {
- RemoveDeadCPEMI(CPEMI);
+ removeDeadCPEMI(CPEMI);
CPE->CPEMI = NULL;
--NumCPEs;
return true;
/// 0 = no existing entry found
/// 1 = entry found, and there were no code insertions or deletions
/// 2 = entry found, and there were code insertions or deletions
-int ARMConstantIslands::LookForExistingCPEntry(CPUser& U, unsigned UserOffset)
+int ARMConstantIslands::findInRangeCPEntry(CPUser& U, unsigned UserOffset)
{
MachineInstr *UserMI = U.MI;
MachineInstr *CPEMI = U.CPEMI;
// Check to see if the CPE is already in-range.
- if (CPEIsInRange(UserMI, UserOffset, CPEMI, U.getMaxDisp(), U.NegOk, true)) {
+ if (isCPEntryInRange(UserMI, UserOffset, CPEMI, U.getMaxDisp(), U.NegOk,
+ true)) {
DEBUG(dbgs() << "In range\n");
return 1;
}
// Removing CPEs can leave empty entries, skip
if (CPEs[i].CPEMI == NULL)
continue;
- if (CPEIsInRange(UserMI, UserOffset, CPEs[i].CPEMI, U.getMaxDisp(),
+ if (isCPEntryInRange(UserMI, UserOffset, CPEs[i].CPEMI, U.getMaxDisp(),
U.NegOk)) {
DEBUG(dbgs() << "Replacing CPE#" << CPI << " with CPE#"
<< CPEs[i].CPI << "\n");
CPEs[i].RefCount++;
// ...and the original. If we didn't remove the old entry, none of the
// addresses changed, so we don't need another pass.
- return DecrementOldEntry(CPI, CPEMI) ? 2 : 1;
+ return decrementCPEReferenceCount(CPI, CPEMI) ? 2 : 1;
}
}
return 0;
return ((1<<23)-1)*4;
}
-/// LookForWater - Look for an existing entry in the WaterList in which
+/// findAvailableWater - Look for an existing entry in the WaterList in which
/// we can place the CPE referenced from U so it's within range of U's MI.
/// Returns true if found, false if not. If it returns true, WaterIter
/// is set to the WaterList entry. For Thumb, prefer water that will not
/// terminates, the CPE location for a particular CPUser is only allowed to
/// move to a lower address, so search backward from the end of the list and
/// prefer the first water that is in range.
-bool ARMConstantIslands::LookForWater(CPUser &U, unsigned UserOffset,
+bool ARMConstantIslands::findAvailableWater(CPUser &U, unsigned UserOffset,
water_iterator &WaterIter) {
if (WaterList.empty())
return false;
// sure to take advantage of it for all the CPEs near that block, so that
// we don't insert more branches than necessary.
unsigned Growth;
- if (WaterIsInRange(UserOffset, WaterBB, U, Growth) &&
+ if (isWaterInRange(UserOffset, WaterBB, U, Growth) &&
(WaterBB->getNumber() < U.HighWaterMark->getNumber() ||
NewWaterList.count(WaterBB)) && Growth < BestGrowth) {
// This is the least amount of required padding seen so far.
return BestGrowth != ~0u;
}
-/// CreateNewWater - No existing WaterList entry will work for
+/// createNewWater - No existing WaterList entry will work for
/// CPUsers[CPUserIndex], so create a place to put the CPE. The end of the
/// block is used if in range, and the conditional branch munged so control
/// flow is correct. Otherwise the block is split to create a hole with an
/// unconditional branch around it. In either case NewMBB is set to a
/// block following which the new island can be inserted (the WaterList
/// is not adjusted).
-void ARMConstantIslands::CreateNewWater(unsigned CPUserIndex,
+void ARMConstantIslands::createNewWater(unsigned CPUserIndex,
unsigned UserOffset,
MachineBasicBlock *&NewMBB) {
CPUser &U = CPUsers[CPUserIndex];
if (BBHasFallthrough(UserMBB)) {
// Size of branch to insert.
unsigned Delta = isThumb1 ? 2 : 4;
- // End of UserBlock after adding a branch.
- unsigned UserBlockEnd = UserBBI.postOffset() + Delta;
// Compute the offset where the CPE will begin.
- unsigned CPEOffset = WorstCaseAlign(UserBlockEnd, CPELogAlign,
- UserBBI.postKnownBits());
+ unsigned CPEOffset = UserBBI.postOffset(CPELogAlign) + Delta;
- if (OffsetIsInRange(UserOffset, CPEOffset, U)) {
+ if (isOffsetInRange(UserOffset, CPEOffset, U)) {
DEBUG(dbgs() << "Split at end of BB#" << UserMBB->getNumber()
<< format(", expected CPE offset %#x\n", CPEOffset));
NewMBB = llvm::next(MachineFunction::iterator(UserMBB));
ImmBranches.push_back(ImmBranch(&UserMBB->back(),
MaxDisp, false, UncondBr));
BBInfo[UserMBB->getNumber()].Size += Delta;
- AdjustBBOffsetsAfter(UserMBB);
+ adjustBBOffsetsAfter(UserMBB);
return;
}
}
// up the insertion point.
// Try to split the block so it's fully aligned. Compute the latest split
- // point where we can add a 4-byte branch instruction, and then
- // WorstCaseAlign to LogAlign.
+ // point where we can add a 4-byte branch instruction, and then align to
+ // LogAlign which is the largest possible alignment in the function.
unsigned LogAlign = MF->getAlignment();
assert(LogAlign >= CPELogAlign && "Over-aligned constant pool entry");
unsigned KnownBits = UserBBI.internalKnownBits();
unsigned UPad = UnknownPadding(LogAlign, KnownBits);
- unsigned BaseInsertOffset = UserOffset + U.getMaxDisp();
+ unsigned BaseInsertOffset = UserOffset + U.getMaxDisp() - UPad;
DEBUG(dbgs() << format("Split in middle of big block before %#x",
BaseInsertOffset));
- // Account for alignment and unknown padding.
- BaseInsertOffset &= ~((1u << LogAlign) - 1);
- BaseInsertOffset -= UPad;
-
// The 4 in the following is for the unconditional branch we'll be inserting
// (allows for long branch on Thumb1). Alignment of the island is handled
- // inside OffsetIsInRange.
+ // inside isOffsetInRange.
BaseInsertOffset -= 4;
DEBUG(dbgs() << format(", adjusted to %#x", BaseInsertOffset)
// pool entries following this block; only the last one is in the water list.
// Back past any possible branches (allow for a conditional and a maximally
// long unconditional).
- if (BaseInsertOffset >= BBInfo[UserMBB->getNumber()+1].Offset)
- BaseInsertOffset = BBInfo[UserMBB->getNumber()+1].Offset -
- (isThumb1 ? 6 : 8);
- unsigned EndInsertOffset =
- WorstCaseAlign(BaseInsertOffset + 4, LogAlign, KnownBits) +
+ if (BaseInsertOffset + 8 >= UserBBI.postOffset()) {
+ BaseInsertOffset = UserBBI.postOffset() - UPad - 8;
+ DEBUG(dbgs() << format("Move inside block: %#x\n", BaseInsertOffset));
+ }
+ unsigned EndInsertOffset = BaseInsertOffset + 4 + UPad +
CPEMI->getOperand(2).getImm();
MachineBasicBlock::iterator MI = UserMI;
++MI;
Offset < BaseInsertOffset;
Offset += TII->GetInstSizeInBytes(MI),
MI = llvm::next(MI)) {
+ assert(MI != UserMBB->end() && "Fell off end of block");
if (CPUIndex < NumCPUsers && CPUsers[CPUIndex].MI == MI) {
CPUser &U = CPUsers[CPUIndex];
- if (!OffsetIsInRange(Offset, EndInsertOffset, U)) {
+ if (!isOffsetInRange(Offset, EndInsertOffset, U)) {
// Shift intertion point by one unit of alignment so it is within reach.
BaseInsertOffset -= 1u << LogAlign;
EndInsertOffset -= 1u << LogAlign;
// reused within the block, but it doesn't matter much. Also assume CPEs
// are added in order with alignment padding. We may eventually be able
// to pack the aligned CPEs better.
- EndInsertOffset = RoundUpToAlignment(EndInsertOffset,
- 1u << getCPELogAlign(U.CPEMI)) +
- U.CPEMI->getOperand(2).getImm();
+ EndInsertOffset += U.CPEMI->getOperand(2).getImm();
CPUIndex++;
}
// Avoid splitting an IT block.
if (LastIT) {
unsigned PredReg = 0;
- ARMCC::CondCodes CC = llvm::getITInstrPredicate(MI, PredReg);
+ ARMCC::CondCodes CC = getITInstrPredicate(MI, PredReg);
if (CC != ARMCC::AL)
MI = LastIT;
}
- NewMBB = SplitBlockBeforeInstr(MI);
+ NewMBB = splitBlockBeforeInstr(MI);
}
-/// HandleConstantPoolUser - Analyze the specified user, checking to see if it
+/// handleConstantPoolUser - Analyze the specified user, checking to see if it
/// is out-of-range. If so, pick up the constant pool value and move it some
/// place in-range. Return true if we changed any addresses (thus must run
/// another pass of branch lengthening), false otherwise.
-bool ARMConstantIslands::HandleConstantPoolUser(unsigned CPUserIndex) {
+bool ARMConstantIslands::handleConstantPoolUser(unsigned CPUserIndex) {
CPUser &U = CPUsers[CPUserIndex];
MachineInstr *UserMI = U.MI;
MachineInstr *CPEMI = U.CPEMI;
unsigned CPI = CPEMI->getOperand(1).getIndex();
unsigned Size = CPEMI->getOperand(2).getImm();
// Compute this only once, it's expensive.
- unsigned UserOffset = GetUserOffset(U);
+ unsigned UserOffset = getUserOffset(U);
// See if the current entry is within range, or there is a clone of it
// in range.
- int result = LookForExistingCPEntry(U, UserOffset);
+ int result = findInRangeCPEntry(U, UserOffset);
if (result==1) return false;
else if (result==2) return true;
MachineBasicBlock *NewIsland = MF->CreateMachineBasicBlock();
MachineBasicBlock *NewMBB;
water_iterator IP;
- if (LookForWater(U, UserOffset, IP)) {
+ if (findAvailableWater(U, UserOffset, IP)) {
DEBUG(dbgs() << "Found water in range\n");
MachineBasicBlock *WaterBB = *IP;
// If the original WaterList entry was "new water" on this iteration,
// propagate that to the new island. This is just keeping NewWaterList
// updated to match the WaterList, which will be updated below.
- if (NewWaterList.count(WaterBB)) {
- NewWaterList.erase(WaterBB);
+ if (NewWaterList.erase(WaterBB))
NewWaterList.insert(NewIsland);
- }
+
// The new CPE goes before the following block (NewMBB).
NewMBB = llvm::next(MachineFunction::iterator(WaterBB));
} else {
// No water found.
DEBUG(dbgs() << "No water found\n");
- CreateNewWater(CPUserIndex, UserOffset, NewMBB);
+ createNewWater(CPUserIndex, UserOffset, NewMBB);
- // SplitBlockBeforeInstr adds to WaterList, which is important when it is
+ // splitBlockBeforeInstr adds to WaterList, which is important when it is
// called while handling branches so that the water will be seen on the
// next iteration for constant pools, but in this context, we don't want
// it. Check for this so it will be removed from the WaterList.
MF->insert(NewMBB, NewIsland);
// Update internal data structures to account for the newly inserted MBB.
- UpdateForInsertedWaterBlock(NewIsland);
+ updateForInsertedWaterBlock(NewIsland);
// Decrement the old entry, and remove it if refcount becomes 0.
- DecrementOldEntry(CPI, CPEMI);
+ decrementCPEReferenceCount(CPI, CPEMI);
// Now that we have an island to add the CPE to, clone the original CPE and
// add it to the island.
// Increase the size of the island block to account for the new entry.
BBInfo[NewIsland->getNumber()].Size += Size;
- AdjustBBOffsetsAfter(llvm::prior(MachineFunction::iterator(NewIsland)));
+ adjustBBOffsetsAfter(llvm::prior(MachineFunction::iterator(NewIsland)));
// Finally, change the CPI in the instruction operand to be ID.
for (unsigned i = 0, e = UserMI->getNumOperands(); i != e; ++i)
return true;
}
-/// RemoveDeadCPEMI - Remove a dead constant pool entry instruction. Update
+/// removeDeadCPEMI - Remove a dead constant pool entry instruction. Update
/// sizes and offsets of impacted basic blocks.
-void ARMConstantIslands::RemoveDeadCPEMI(MachineInstr *CPEMI) {
+void ARMConstantIslands::removeDeadCPEMI(MachineInstr *CPEMI) {
MachineBasicBlock *CPEBB = CPEMI->getParent();
unsigned Size = CPEMI->getOperand(2).getImm();
CPEMI->eraseFromParent();
// Entries are sorted by descending alignment, so realign from the front.
CPEBB->setAlignment(getCPELogAlign(CPEBB->begin()));
- AdjustBBOffsetsAfter(CPEBB);
+ adjustBBOffsetsAfter(CPEBB);
// An island has only one predecessor BB and one successor BB. Check if
// this BB's predecessor jumps directly to this BB's successor. This
// shouldn't happen currently.
// FIXME: remove the empty blocks after all the work is done?
}
-/// RemoveUnusedCPEntries - Remove constant pool entries whose refcounts
+/// removeUnusedCPEntries - Remove constant pool entries whose refcounts
/// are zero.
-bool ARMConstantIslands::RemoveUnusedCPEntries() {
+bool ARMConstantIslands::removeUnusedCPEntries() {
unsigned MadeChange = false;
for (unsigned i = 0, e = CPEntries.size(); i != e; ++i) {
std::vector<CPEntry> &CPEs = CPEntries[i];
for (unsigned j = 0, ee = CPEs.size(); j != ee; ++j) {
if (CPEs[j].RefCount == 0 && CPEs[j].CPEMI) {
- RemoveDeadCPEMI(CPEs[j].CPEMI);
+ removeDeadCPEMI(CPEs[j].CPEMI);
CPEs[j].CPEMI = NULL;
MadeChange = true;
}
return MadeChange;
}
-/// BBIsInRange - Returns true if the distance between specific MI and
+/// isBBInRange - Returns true if the distance between specific MI and
/// specific BB can fit in MI's displacement field.
-bool ARMConstantIslands::BBIsInRange(MachineInstr *MI,MachineBasicBlock *DestBB,
+bool ARMConstantIslands::isBBInRange(MachineInstr *MI,MachineBasicBlock *DestBB,
unsigned MaxDisp) {
unsigned PCAdj = isThumb ? 4 : 8;
- unsigned BrOffset = GetOffsetOf(MI) + PCAdj;
+ unsigned BrOffset = getOffsetOf(MI) + PCAdj;
unsigned DestOffset = BBInfo[DestBB->getNumber()].Offset;
DEBUG(dbgs() << "Branch of destination BB#" << DestBB->getNumber()
<< " from BB#" << MI->getParent()->getNumber()
<< " max delta=" << MaxDisp
- << " from " << GetOffsetOf(MI) << " to " << DestOffset
+ << " from " << getOffsetOf(MI) << " to " << DestOffset
<< " offset " << int(DestOffset-BrOffset) << "\t" << *MI);
if (BrOffset <= DestOffset) {
return false;
}
-/// FixUpImmediateBr - Fix up an immediate branch whose destination is too far
+/// fixupImmediateBr - Fix up an immediate branch whose destination is too far
/// away to fit in its displacement field.
-bool ARMConstantIslands::FixUpImmediateBr(ImmBranch &Br) {
+bool ARMConstantIslands::fixupImmediateBr(ImmBranch &Br) {
MachineInstr *MI = Br.MI;
MachineBasicBlock *DestBB = MI->getOperand(0).getMBB();
// Check to see if the DestBB is already in-range.
- if (BBIsInRange(MI, DestBB, Br.MaxDisp))
+ if (isBBInRange(MI, DestBB, Br.MaxDisp))
return false;
if (!Br.isCond)
- return FixUpUnconditionalBr(Br);
- return FixUpConditionalBr(Br);
+ return fixupUnconditionalBr(Br);
+ return fixupConditionalBr(Br);
}
-/// FixUpUnconditionalBr - Fix up an unconditional branch whose destination is
+/// fixupUnconditionalBr - Fix up an unconditional branch whose destination is
/// too far away to fit in its displacement field. If the LR register has been
/// spilled in the epilogue, then we can use BL to implement a far jump.
/// Otherwise, add an intermediate branch instruction to a branch.
bool
-ARMConstantIslands::FixUpUnconditionalBr(ImmBranch &Br) {
+ARMConstantIslands::fixupUnconditionalBr(ImmBranch &Br) {
MachineInstr *MI = Br.MI;
MachineBasicBlock *MBB = MI->getParent();
if (!isThumb1)
- llvm_unreachable("FixUpUnconditionalBr is Thumb1 only!");
+ llvm_unreachable("fixupUnconditionalBr is Thumb1 only!");
// Use BL to implement far jump.
Br.MaxDisp = (1 << 21) * 2;
MI->setDesc(TII->get(ARM::tBfar));
BBInfo[MBB->getNumber()].Size += 2;
- AdjustBBOffsetsAfter(MBB);
+ adjustBBOffsetsAfter(MBB);
HasFarJump = true;
++NumUBrFixed;
return true;
}
-/// FixUpConditionalBr - Fix up a conditional branch whose destination is too
+/// fixupConditionalBr - Fix up a conditional branch whose destination is too
/// far away to fit in its displacement field. It is converted to an inverse
/// conditional branch + an unconditional branch to the destination.
bool
-ARMConstantIslands::FixUpConditionalBr(ImmBranch &Br) {
+ARMConstantIslands::fixupConditionalBr(ImmBranch &Br) {
MachineInstr *MI = Br.MI;
MachineBasicBlock *DestBB = MI->getOperand(0).getMBB();
// bne L2
// b L1
MachineBasicBlock *NewDest = BMI->getOperand(0).getMBB();
- if (BBIsInRange(MI, NewDest, Br.MaxDisp)) {
+ if (isBBInRange(MI, NewDest, Br.MaxDisp)) {
DEBUG(dbgs() << " Invert Bcc condition and swap its destination with "
<< *BMI);
BMI->getOperand(0).setMBB(DestBB);
}
if (NeedSplit) {
- SplitBlockBeforeInstr(MI);
+ splitBlockBeforeInstr(MI);
// No need for the branch to the next block. We're adding an unconditional
// branch to the destination.
int delta = TII->GetInstSizeInBytes(&MBB->back());
// Remove the old conditional branch. It may or may not still be in MBB.
BBInfo[MI->getParent()->getNumber()].Size -= TII->GetInstSizeInBytes(MI);
MI->eraseFromParent();
- AdjustBBOffsetsAfter(MBB);
+ adjustBBOffsetsAfter(MBB);
return true;
}
-/// UndoLRSpillRestore - Remove Thumb push / pop instructions that only spills
+/// undoLRSpillRestore - Remove Thumb push / pop instructions that only spills
/// LR / restores LR to pc. FIXME: This is done here because it's only possible
/// to do this if tBfar is not used.
-bool ARMConstantIslands::UndoLRSpillRestore() {
+bool ARMConstantIslands::undoLRSpillRestore() {
bool MadeChange = false;
for (unsigned i = 0, e = PushPopMIs.size(); i != e; ++i) {
MachineInstr *MI = PushPopMIs[i];
return MadeChange;
}
-// mayOptimizeThumb2Instruction - Returns true if OptimizeThumb2Instructions
+// mayOptimizeThumb2Instruction - Returns true if optimizeThumb2Instructions
// below may shrink MI.
bool
ARMConstantIslands::mayOptimizeThumb2Instruction(const MachineInstr *MI) const {
switch(MI->getOpcode()) {
- // OptimizeThumb2Instructions.
+ // optimizeThumb2Instructions.
case ARM::t2LEApcrel:
case ARM::t2LDRpci:
- // OptimizeThumb2Branches.
+ // optimizeThumb2Branches.
case ARM::t2B:
case ARM::t2Bcc:
case ARM::tBcc:
- // OptimizeThumb2JumpTables.
+ // optimizeThumb2JumpTables.
case ARM::t2BR_JT:
return true;
}
return false;
}
-bool ARMConstantIslands::OptimizeThumb2Instructions() {
+bool ARMConstantIslands::optimizeThumb2Instructions() {
bool MadeChange = false;
// Shrink ADR and LDR from constantpool.
if (!NewOpc)
continue;
- unsigned UserOffset = GetUserOffset(U);
+ unsigned UserOffset = getUserOffset(U);
unsigned MaxOffs = ((1 << Bits) - 1) * Scale;
// Be conservative with inline asm.
MaxOffs -= 2;
// FIXME: Check if offset is multiple of scale if scale is not 4.
- if (CPEIsInRange(U.MI, UserOffset, U.CPEMI, MaxOffs, false, true)) {
+ if (isCPEntryInRange(U.MI, UserOffset, U.CPEMI, MaxOffs, false, true)) {
+ DEBUG(dbgs() << "Shrink: " << *U.MI);
U.MI->setDesc(TII->get(NewOpc));
MachineBasicBlock *MBB = U.MI->getParent();
BBInfo[MBB->getNumber()].Size -= 2;
- AdjustBBOffsetsAfter(MBB);
+ adjustBBOffsetsAfter(MBB);
++NumT2CPShrunk;
MadeChange = true;
}
}
- MadeChange |= OptimizeThumb2Branches();
- MadeChange |= OptimizeThumb2JumpTables();
+ MadeChange |= optimizeThumb2Branches();
+ MadeChange |= optimizeThumb2JumpTables();
return MadeChange;
}
-bool ARMConstantIslands::OptimizeThumb2Branches() {
+bool ARMConstantIslands::optimizeThumb2Branches() {
bool MadeChange = false;
for (unsigned i = 0, e = ImmBranches.size(); i != e; ++i) {
if (NewOpc) {
unsigned MaxOffs = ((1 << (Bits-1))-1) * Scale;
MachineBasicBlock *DestBB = Br.MI->getOperand(0).getMBB();
- if (BBIsInRange(Br.MI, DestBB, MaxOffs)) {
+ if (isBBInRange(Br.MI, DestBB, MaxOffs)) {
+ DEBUG(dbgs() << "Shrink branch: " << *Br.MI);
Br.MI->setDesc(TII->get(NewOpc));
MachineBasicBlock *MBB = Br.MI->getParent();
BBInfo[MBB->getNumber()].Size -= 2;
- AdjustBBOffsetsAfter(MBB);
+ adjustBBOffsetsAfter(MBB);
++NumT2BrShrunk;
MadeChange = true;
}
NewOpc = 0;
unsigned PredReg = 0;
- ARMCC::CondCodes Pred = llvm::getInstrPredicate(Br.MI, PredReg);
+ ARMCC::CondCodes Pred = getInstrPredicate(Br.MI, PredReg);
if (Pred == ARMCC::EQ)
NewOpc = ARM::tCBZ;
else if (Pred == ARMCC::NE)
MachineBasicBlock *DestBB = Br.MI->getOperand(0).getMBB();
// Check if the distance is within 126. Subtract starting offset by 2
// because the cmp will be eliminated.
- unsigned BrOffset = GetOffsetOf(Br.MI) + 4 - 2;
+ unsigned BrOffset = getOffsetOf(Br.MI) + 4 - 2;
unsigned DestOffset = BBInfo[DestBB->getNumber()].Offset;
if (BrOffset < DestOffset && (DestOffset - BrOffset) <= 126) {
MachineBasicBlock::iterator CmpMI = Br.MI;
--CmpMI;
if (CmpMI->getOpcode() == ARM::tCMPi8) {
unsigned Reg = CmpMI->getOperand(0).getReg();
- Pred = llvm::getInstrPredicate(CmpMI, PredReg);
+ Pred = getInstrPredicate(CmpMI, PredReg);
if (Pred == ARMCC::AL &&
CmpMI->getOperand(1).getImm() == 0 &&
isARMLowRegister(Reg)) {
MachineBasicBlock *MBB = Br.MI->getParent();
+ DEBUG(dbgs() << "Fold: " << *CmpMI << " and: " << *Br.MI);
MachineInstr *NewBR =
BuildMI(*MBB, CmpMI, Br.MI->getDebugLoc(), TII->get(NewOpc))
.addReg(Reg).addMBB(DestBB,Br.MI->getOperand(0).getTargetFlags());
Br.MI->eraseFromParent();
Br.MI = NewBR;
BBInfo[MBB->getNumber()].Size -= 2;
- AdjustBBOffsetsAfter(MBB);
+ adjustBBOffsetsAfter(MBB);
++NumCBZ;
MadeChange = true;
}
return MadeChange;
}
-/// OptimizeThumb2JumpTables - Use tbb / tbh instructions to generate smaller
+/// optimizeThumb2JumpTables - Use tbb / tbh instructions to generate smaller
/// jumptables when it's possible.
-bool ARMConstantIslands::OptimizeThumb2JumpTables() {
+bool ARMConstantIslands::optimizeThumb2JumpTables() {
bool MadeChange = false;
// FIXME: After the tables are shrunk, can we get rid some of the
bool ByteOk = true;
bool HalfWordOk = true;
- unsigned JTOffset = GetOffsetOf(MI) + 4;
+ unsigned JTOffset = getOffsetOf(MI) + 4;
const std::vector<MachineBasicBlock*> &JTBBs = JT[JTI].MBBs;
for (unsigned j = 0, ee = JTBBs.size(); j != ee; ++j) {
MachineBasicBlock *MBB = JTBBs[j];
if (!OptOk)
continue;
+ DEBUG(dbgs() << "Shrink JT: " << *MI << " addr: " << *AddrMI
+ << " lea: " << *LeaMI);
unsigned Opc = ByteOk ? ARM::t2TBB_JT : ARM::t2TBH_JT;
MachineInstr *NewJTMI = BuildMI(MBB, MI->getDebugLoc(), TII->get(Opc))
.addReg(IdxReg, getKillRegState(IdxRegKill))
.addJumpTableIndex(JTI, JTOP.getTargetFlags())
.addImm(MI->getOperand(JTOpIdx+1).getImm());
+ DEBUG(dbgs() << "BB#" << MBB->getNumber() << ": " << *NewJTMI);
// FIXME: Insert an "ALIGN" instruction to ensure the next instruction
// is 2-byte aligned. For now, asm printer will fix it up.
unsigned NewSize = TII->GetInstSizeInBytes(NewJTMI);
int delta = OrigSize - NewSize;
BBInfo[MBB->getNumber()].Size -= delta;
- AdjustBBOffsetsAfter(MBB);
+ adjustBBOffsetsAfter(MBB);
++NumTBs;
MadeChange = true;
return MadeChange;
}
-/// ReorderThumb2JumpTables - Adjust the function's block layout to ensure that
+/// reorderThumb2JumpTables - Adjust the function's block layout to ensure that
/// jump tables always branch forwards, since that's what tbb and tbh need.
-bool ARMConstantIslands::ReorderThumb2JumpTables() {
+bool ARMConstantIslands::reorderThumb2JumpTables() {
bool MadeChange = false;
MachineJumpTableInfo *MJTI = MF->getJumpTableInfo();
// The destination precedes the switch. Try to move the block forward
// so we have a positive offset.
MachineBasicBlock *NewBB =
- AdjustJTTargetBlockForward(MBB, MI->getParent());
+ adjustJTTargetBlockForward(MBB, MI->getParent());
if (NewBB)
MJTI->ReplaceMBBInJumpTable(JTI, JTBBs[j], NewBB);
MadeChange = true;
}
MachineBasicBlock *ARMConstantIslands::
-AdjustJTTargetBlockForward(MachineBasicBlock *BB, MachineBasicBlock *JTBB)
-{
+adjustJTTargetBlockForward(MachineBasicBlock *BB, MachineBasicBlock *JTBB) {
// If the destination block is terminated by an unconditional branch,
// try to move it; otherwise, create a new block following the jump
// table that branches back to the actual target. This is a very simple