// Mips profiles and nodes
//===----------------------------------------------------------------------===//
+def SDT_MipsRet : SDTypeProfile<0, 1, [SDTCisInt<0>]>;
+def SDT_MipsJmpLink : SDTypeProfile<0, 1, [SDTCisVT<0, iPTR>]>;
+def SDT_MipsSelectCC : SDTypeProfile<1, 3, [SDTCisSameAs<0, 2>,
+ SDTCisSameAs<2, 3>, SDTCisInt<1>]>;
+def SDT_MipsCMov : SDTypeProfile<1, 4, [SDTCisSameAs<0, 1>,
+ SDTCisSameAs<1, 2>, SDTCisSameAs<3, 4>,
+ SDTCisInt<4>]>;
+def SDT_MipsCallSeqStart : SDCallSeqStart<[SDTCisVT<0, i32>]>;
+def SDT_MipsCallSeqEnd : SDCallSeqEnd<[SDTCisVT<0, i32>, SDTCisVT<1, i32>]>;
+
// Call
-def SDT_MipsJmpLink : SDTypeProfile<0, 1, [SDTCisVT<0, iPTR>]>;
-def MipsJmpLink : SDNode<"MipsISD::JmpLink",SDT_MipsJmpLink, [SDNPHasChain,
- SDNPOutFlag]>;
+def MipsJmpLink : SDNode<"MipsISD::JmpLink",SDT_MipsJmpLink,
+ [SDNPHasChain, SDNPOutFlag, SDNPOptInFlag]>;
// Hi and Lo nodes are used to handle global addresses. Used on
// MipsISelLowering to lower stuff like GlobalAddress, ExternalSymbol
// static model. (nothing to do with Mips Registers Hi and Lo)
-def MipsHi : SDNode<"MipsISD::Hi", SDTIntUnaryOp, [SDNPOutFlag]>;
-def MipsLo : SDNode<"MipsISD::Lo", SDTIntUnaryOp>;
+def MipsHi : SDNode<"MipsISD::Hi", SDTIntUnaryOp>;
+def MipsLo : SDNode<"MipsISD::Lo", SDTIntUnaryOp>;
+def MipsGPRel : SDNode<"MipsISD::GPRel", SDTIntUnaryOp>;
// Return
-def SDT_MipsRet : SDTypeProfile<0, 1, [SDTCisInt<0>]>;
-def MipsRet : SDNode<"MipsISD::Ret", SDT_MipsRet, [SDNPHasChain,
- SDNPOptInFlag]>;
+def MipsRet : SDNode<"MipsISD::Ret", SDT_MipsRet, [SDNPHasChain,
+ SDNPOptInFlag]>;
// These are target-independent nodes, but have target-specific formats.
-def SDT_MipsCallSeqStart : SDCallSeqStart<[SDTCisVT<0, i32>]>;
-def SDT_MipsCallSeqEnd : SDCallSeqEnd<[SDTCisVT<0, i32>,
- SDTCisVT<1, i32>]>;
+def callseq_start : SDNode<"ISD::CALLSEQ_START", SDT_MipsCallSeqStart,
+ [SDNPHasChain, SDNPOutFlag]>;
+def callseq_end : SDNode<"ISD::CALLSEQ_END", SDT_MipsCallSeqEnd,
+ [SDNPHasChain, SDNPOptInFlag, SDNPOutFlag]>;
+
+// Select Condition Code
+def MipsSelectCC : SDNode<"MipsISD::SelectCC", SDT_MipsSelectCC>;
-def callseq_start : SDNode<"ISD::CALLSEQ_START", SDT_MipsCallSeqStart,
- [SDNPHasChain, SDNPOutFlag]>;
-def callseq_end : SDNode<"ISD::CALLSEQ_END", SDT_MipsCallSeqEnd,
- [SDNPHasChain, SDNPOptInFlag, SDNPOutFlag]>;
+// Conditional Move
+def MipsCMov : SDNode<"MipsISD::CMov", SDT_MipsCMov>;
//===----------------------------------------------------------------------===//
// Mips Instruction Predicate Definitions.
//===----------------------------------------------------------------------===//
-def IsStatic : Predicate<"TM.getRelocationModel() == Reloc::Static">;
+def HasSEInReg : Predicate<"Subtarget.hasSEInReg()">;
+def HasBitCount : Predicate<"Subtarget.hasBitCount()">;
+def HasSwap : Predicate<"Subtarget.hasSwap()">;
+def HasCondMov : Predicate<"Subtarget.hasCondMov()">;
//===----------------------------------------------------------------------===//
// Mips Operand, Complex Patterns and Transformations Definitions.
// Instruction operand types
def brtarget : Operand<OtherVT>;
def calltarget : Operand<i32>;
-def uimm16 : Operand<i32>;
def simm16 : Operand<i32>;
def shamt : Operand<i32>;
-def addrlabel : Operand<i32>;
+
+// Unsigned Operand
+def uimm16 : Operand<i32> {
+ let PrintMethod = "printUnsignedImm";
+}
// Address operand
def mem : Operand<i32> {
// Transformation Function - get the lower 16 bits.
def LO16 : SDNodeXForm<imm, [{
- return getI32Imm((unsigned)N->getValue() & 0xFFFF);
+ return getI32Imm((unsigned)N->getZExtValue() & 0xFFFF);
}]>;
// Transformation Function - get the higher 16 bits.
def HI16 : SDNodeXForm<imm, [{
- return getI32Imm((unsigned)N->getValue() >> 16);
+ return getI32Imm((unsigned)N->getZExtValue() >> 16);
}]>;
// Node immediate fits as 16-bit sign extended on target immediate.
// e.g. addi, andi
def immSExt16 : PatLeaf<(imm), [{
if (N->getValueType(0) == MVT::i32)
- return (int32_t)N->getValue() == (short)N->getValue();
+ return (int32_t)N->getZExtValue() == (short)N->getZExtValue();
else
- return (int64_t)N->getValue() == (short)N->getValue();
+ return (int64_t)N->getZExtValue() == (short)N->getZExtValue();
}]>;
// Node immediate fits as 16-bit zero extended on target immediate.
// e.g. addiu, sltiu
def immZExt16 : PatLeaf<(imm), [{
if (N->getValueType(0) == MVT::i32)
- return (uint32_t)N->getValue() == (unsigned short)N->getValue();
+ return (uint32_t)N->getZExtValue() == (unsigned short)N->getZExtValue();
else
- return (uint64_t)N->getValue() == (unsigned short)N->getValue();
+ return (uint64_t)N->getZExtValue() == (unsigned short)N->getZExtValue();
}], LO16>;
-// Node immediate fits as 32-bit zero extended on target immediate.
-//def immZExt32 : PatLeaf<(imm), [{
-// return (uint64_t)N->getValue() == (uint32_t)N->getValue();
-//}], LO16>;
-
// shamt field must fit in 5 bits.
def immZExt5 : PatLeaf<(imm), [{
- return N->getValue() == ((N->getValue()) & 0x1f) ;
+ return N->getZExtValue() == ((N->getZExtValue()) & 0x1f) ;
}]>;
// Mips Address Mode! SDNode frameindex could possibily be a match
// since load and store instructions from stack used it.
-def addr : ComplexPattern<i32, 2, "SelectAddr", [frameindex], []>;
+def addr : ComplexPattern<iPTR, 2, "SelectAddr", [frameindex], []>;
//===----------------------------------------------------------------------===//
// Instructions specific format
func,
(outs CPURegs:$dst),
(ins CPURegs:$b, CPURegs:$c),
- !strconcat(instr_asm, " $dst, $b, $c"),
+ !strconcat(instr_asm, "\t$dst, $b, $c"),
[(set CPURegs:$dst, (OpNode CPURegs:$b, CPURegs:$c))], itin>;
let isCommutable = 1 in
func,
(outs CPURegs:$dst),
(ins CPURegs:$b, CPURegs:$c),
- !strconcat(instr_asm, " $dst, $b, $c"),
+ !strconcat(instr_asm, "\t$dst, $b, $c"),
[], IIAlu>;
// Arithmetic 2 register operands
FI< op,
(outs CPURegs:$dst),
(ins CPURegs:$b, Od:$c),
- !strconcat(instr_asm, " $dst, $b, $c"),
+ !strconcat(instr_asm, "\t$dst, $b, $c"),
[(set CPURegs:$dst, (OpNode CPURegs:$b, imm_type:$c))], IIAlu>;
+class ArithOverflowI<bits<6> op, string instr_asm, SDNode OpNode,
+ Operand Od, PatLeaf imm_type> :
+ FI< op,
+ (outs CPURegs:$dst),
+ (ins CPURegs:$b, Od:$c),
+ !strconcat(instr_asm, "\t$dst, $b, $c"),
+ [], IIAlu>;
+
// Arithmetic Multiply ADD/SUB
let rd=0 in
class MArithR<bits<6> func, string instr_asm> :
func,
(outs CPURegs:$rs),
(ins CPURegs:$rt),
- !strconcat(instr_asm, " $rs, $rt"),
+ !strconcat(instr_asm, "\t$rs, $rt"),
[], IIImul>;
// Logical
func,
(outs CPURegs:$dst),
(ins CPURegs:$b, CPURegs:$c),
- !strconcat(instr_asm, " $dst, $b, $c"),
+ !strconcat(instr_asm, "\t$dst, $b, $c"),
[(set CPURegs:$dst, (OpNode CPURegs:$b, CPURegs:$c))], IIAlu>;
class LogicI<bits<6> op, string instr_asm, SDNode OpNode>:
FI< op,
(outs CPURegs:$dst),
(ins CPURegs:$b, uimm16:$c),
- !strconcat(instr_asm, " $dst, $b, $c"),
- [(set CPURegs:$dst, (OpNode CPURegs:$b, immSExt16:$c))], IIAlu>;
+ !strconcat(instr_asm, "\t$dst, $b, $c"),
+ [(set CPURegs:$dst, (OpNode CPURegs:$b, immZExt16:$c))], IIAlu>;
class LogicNOR<bits<6> op, bits<6> func, string instr_asm>:
FR< op,
func,
(outs CPURegs:$dst),
(ins CPURegs:$b, CPURegs:$c),
- !strconcat(instr_asm, " $dst, $b, $c"),
+ !strconcat(instr_asm, "\t$dst, $b, $c"),
[(set CPURegs:$dst, (not (or CPURegs:$b, CPURegs:$c)))], IIAlu>;
// Shifts
func,
(outs CPURegs:$dst),
(ins CPURegs:$b, shamt:$c),
- !strconcat(instr_asm, " $dst, $b, $c"),
+ !strconcat(instr_asm, "\t$dst, $b, $c"),
[(set CPURegs:$dst, (OpNode CPURegs:$b, immZExt5:$c))], IIAlu>;
class LogicR_shift_reg<bits<6> func, string instr_asm, SDNode OpNode>:
func,
(outs CPURegs:$dst),
(ins CPURegs:$b, CPURegs:$c),
- !strconcat(instr_asm, " $dst, $b, $c"),
+ !strconcat(instr_asm, "\t$dst, $b, $c"),
[(set CPURegs:$dst, (OpNode CPURegs:$b, CPURegs:$c))], IIAlu>;
// Load Upper Imediate
FI< op,
(outs CPURegs:$dst),
(ins uimm16:$imm),
- !strconcat(instr_asm, " $dst, $imm"),
+ !strconcat(instr_asm, "\t$dst, $imm"),
[], IIAlu>;
// Memory Load/Store
-let isSimpleLoad = 1, hasDelaySlot = 1 in
+let canFoldAsLoad = 1, hasDelaySlot = 1 in
class LoadM<bits<6> op, string instr_asm, PatFrag OpNode>:
FI< op,
(outs CPURegs:$dst),
(ins mem:$addr),
- !strconcat(instr_asm, " $dst, $addr"),
+ !strconcat(instr_asm, "\t$dst, $addr"),
[(set CPURegs:$dst, (OpNode addr:$addr))], IILoad>;
class StoreM<bits<6> op, string instr_asm, PatFrag OpNode>:
FI< op,
(outs),
(ins CPURegs:$dst, mem:$addr),
- !strconcat(instr_asm, " $dst, $addr"),
+ !strconcat(instr_asm, "\t$dst, $addr"),
[(OpNode CPURegs:$dst, addr:$addr)], IIStore>;
// Conditional Branch
FI< op,
(outs),
(ins CPURegs:$a, CPURegs:$b, brtarget:$offset),
- !strconcat(instr_asm, " $a, $b, $offset"),
+ !strconcat(instr_asm, "\t$a, $b, $offset"),
[(brcond (cond_op CPURegs:$a, CPURegs:$b), bb:$offset)],
IIBranch>;
FI< op,
(outs),
(ins CPURegs:$src, brtarget:$offset),
- !strconcat(instr_asm, " $src, $offset"),
+ !strconcat(instr_asm, "\t$src, $offset"),
[(brcond (cond_op CPURegs:$src, 0), bb:$offset)],
IIBranch>;
}
func,
(outs CPURegs:$dst),
(ins CPURegs:$b, CPURegs:$c),
- !strconcat(instr_asm, " $dst, $b, $c"),
+ !strconcat(instr_asm, "\t$dst, $b, $c"),
[(set CPURegs:$dst, (cond_op CPURegs:$b, CPURegs:$c))],
IIAlu>;
FI< op,
(outs CPURegs:$dst),
(ins CPURegs:$b, Od:$c),
- !strconcat(instr_asm, " $dst, $b, $c"),
+ !strconcat(instr_asm, "\t$dst, $b, $c"),
[(set CPURegs:$dst, (cond_op CPURegs:$b, imm_type:$c))],
IIAlu>;
FJ< op,
(outs),
(ins brtarget:$target),
- !strconcat(instr_asm, " $target"),
+ !strconcat(instr_asm, "\t$target"),
[(br bb:$target)], IIBranch>;
let isBranch=1, isTerminator=1, isBarrier=1, rd=0, hasDelaySlot = 1 in
func,
(outs),
(ins CPURegs:$target),
- !strconcat(instr_asm, " $target"),
+ !strconcat(instr_asm, "\t$target"),
[(brind CPURegs:$target)], IIBranch>;
// Jump and Link (Call)
let isCall=1, hasDelaySlot=1,
// All calls clobber the non-callee saved registers...
- Defs = [AT, V0, V1, A0, A1, A2, A3, T0, T1, T2,
- T3, T4, T5, T6, T7, T8, T9, K0, K1], Uses = [GP] in {
+ Defs = [AT, V0, V1, A0, A1, A2, A3, T0, T1, T2, T3, T4, T5, T6, T7, T8, T9,
+ K0, K1, D0, D1, D2, D3, D4, D5, D6, D7, D8, D9], Uses = [GP] in {
class JumpLink<bits<6> op, string instr_asm>:
FJ< op,
(outs),
- (ins calltarget:$target),
- !strconcat(instr_asm, " $target"),
+ (ins calltarget:$target, variable_ops),
+ !strconcat(instr_asm, "\t$target"),
[(MipsJmpLink imm:$target)], IIBranch>;
let rd=31 in
FR< op,
func,
(outs),
- (ins CPURegs:$rs),
- !strconcat(instr_asm, " $rs"),
+ (ins CPURegs:$rs, variable_ops),
+ !strconcat(instr_asm, "\t$rs"),
[(MipsJmpLink CPURegs:$rs)], IIBranch>;
class BranchLink<string instr_asm>:
FI< 0x1,
(outs),
- (ins CPURegs:$rs, brtarget:$target),
- !strconcat(instr_asm, " $rs, $target"),
+ (ins CPURegs:$rs, brtarget:$target, variable_ops),
+ !strconcat(instr_asm, "\t$rs, $target"),
[], IIBranch>;
}
func,
(outs),
(ins CPURegs:$a, CPURegs:$b),
- !strconcat(instr_asm, " $a, $b"),
+ !strconcat(instr_asm, "\t$a, $b"),
[], itin>;
// Move from Hi/Lo
-class MoveFromTo<bits<6> func, string instr_asm>:
+class MoveFromLOHI<bits<6> func, string instr_asm>:
FR< 0x00,
func,
(outs CPURegs:$dst),
(ins),
- !strconcat(instr_asm, " $dst"),
+ !strconcat(instr_asm, "\t$dst"),
[], IIHiLo>;
-// Count Leading Ones/Zeros in Word
-class CountLeading<bits<6> func, string instr_asm>:
- FR< 0x1c,
+class MoveToLOHI<bits<6> func, string instr_asm>:
+ FR< 0x00,
func,
- (outs CPURegs:$dst),
+ (outs),
(ins CPURegs:$src),
- !strconcat(instr_asm, " $dst, $src"),
- [], IIAlu>;
+ !strconcat(instr_asm, "\t$src"),
+ [], IIHiLo>;
class EffectiveAddress<string instr_asm> :
FI<0x09,
instr_asm,
[(set CPURegs:$dst, addr:$addr)], IIAlu>;
+// Count Leading Ones/Zeros in Word
+class CountLeading<bits<6> func, string instr_asm, SDNode CountOp>:
+ FR< 0x1c, func, (outs CPURegs:$dst), (ins CPURegs:$src),
+ !strconcat(instr_asm, "\t$dst, $src"),
+ [(set CPURegs:$dst, (CountOp CPURegs:$src))], IIAlu>;
+
+// Sign Extend in Register.
+class SignExtInReg<bits<6> func, string instr_asm, ValueType vt>:
+ FR< 0x3f, func, (outs CPURegs:$dst), (ins CPURegs:$src),
+ !strconcat(instr_asm, "\t$dst, $src"),
+ [(set CPURegs:$dst, (sext_inreg CPURegs:$src, vt))], NoItinerary>;
+
+// Byte Swap
+class ByteSwap<bits<6> func, string instr_asm>:
+ FR< 0x1f, func, (outs CPURegs:$dst), (ins CPURegs:$src),
+ !strconcat(instr_asm, "\t$dst, $src"),
+ [(set CPURegs:$dst, (bswap CPURegs:$src))], NoItinerary>;
+
+// Conditional Move
+class CondMov<bits<6> func, string instr_asm, PatLeaf MovCode>:
+ FR< 0x00, func, (outs CPURegs:$dst), (ins CPURegs:$F, CPURegs:$T,
+ CPURegs:$cond), !strconcat(instr_asm, "\t$dst, $T, $cond"),
+ [(set CPURegs:$dst, (MipsCMov CPURegs:$F, CPURegs:$T,
+ CPURegs:$cond, MovCode))], NoItinerary>;
+
//===----------------------------------------------------------------------===//
// Pseudo instructions
//===----------------------------------------------------------------------===//
// As stack alignment is always done with addiu, we need a 16-bit immediate
let Defs = [SP], Uses = [SP] in {
-def ADJCALLSTACKDOWN : PseudoInstMips<(outs), (ins uimm16:$amt),
- "!ADJCALLSTACKDOWN $amt",
- [(callseq_start imm:$amt)]>;
-def ADJCALLSTACKUP : PseudoInstMips<(outs), (ins uimm16:$amt1, uimm16:$amt2),
- "!ADJCALLSTACKUP $amt1",
- [(callseq_end imm:$amt1, imm:$amt2)]>;
+def ADJCALLSTACKDOWN : MipsPseudo<(outs), (ins uimm16:$amt),
+ "!ADJCALLSTACKDOWN $amt",
+ [(callseq_start timm:$amt)]>;
+def ADJCALLSTACKUP : MipsPseudo<(outs), (ins uimm16:$amt1, uimm16:$amt2),
+ "!ADJCALLSTACKUP $amt1",
+ [(callseq_end timm:$amt1, timm:$amt2)]>;
}
+// Some assembly macros need to avoid pseudoinstructions and assembler
+// automatic reodering, we should reorder ourselves.
+def MACRO : MipsPseudo<(outs), (ins), ".set\tmacro", []>;
+def REORDER : MipsPseudo<(outs), (ins), ".set\treorder", []>;
+def NOMACRO : MipsPseudo<(outs), (ins), ".set\tnomacro", []>;
+def NOREORDER : MipsPseudo<(outs), (ins), ".set\tnoreorder", []>;
+
// When handling PIC code the assembler needs .cpload and .cprestore
// directives. If the real instructions corresponding these directives
// are used, we have the same behavior, but get also a bunch of warnings
// from the assembler.
-def CPLOAD: PseudoInstMips<(outs), (ins CPURegs:$reg),
- ".set noreorder\n\t.cpload $reg\n\t.set reorder\n", []>;
-def CPRESTORE: PseudoInstMips<(outs), (ins uimm16:$loc),
- ".cprestore $loc\n", []>;
+def CPLOAD : MipsPseudo<(outs), (ins CPURegs:$picreg), ".cpload\t$picreg", []>;
+def CPRESTORE : MipsPseudo<(outs), (ins uimm16:$loc), ".cprestore\t$loc\n", []>;
+
+// The supported Mips ISAs dont have any instruction close to the SELECT_CC
+// operation. The solution is to create a Mips pseudo SELECT_CC instruction
+// (MipsSelectCC), use LowerSELECT_CC to generate this instruction and finally
+// replace it for real supported nodes into EmitInstrWithCustomInserter
+let usesCustomInserter = 1 in {
+ class PseudoSelCC<RegisterClass RC, string asmstr>:
+ MipsPseudo<(outs RC:$dst), (ins CPURegs:$CmpRes, RC:$T, RC:$F), asmstr,
+ [(set RC:$dst, (MipsSelectCC CPURegs:$CmpRes, RC:$T, RC:$F))]>;
+}
+
+def Select_CC : PseudoSelCC<CPURegs, "# MipsSelect_CC_i32">;
//===----------------------------------------------------------------------===//
// Instruction definition
// MipsI Instructions
//===----------------------------------------------------------------------===//
-// Arithmetic
+/// Arithmetic Instructions (ALU Immediate)
+def ADDiu : ArithI<0x09, "addiu", add, simm16, immSExt16>;
+def ADDi : ArithOverflowI<0x08, "addi", add, simm16, immSExt16>;
+def SLTi : SetCC_I<0x0a, "slti", setlt, simm16, immSExt16>;
+def SLTiu : SetCC_I<0x0b, "sltiu", setult, simm16, immSExt16>;
+def ANDi : LogicI<0x0c, "andi", and>;
+def ORi : LogicI<0x0d, "ori", or>;
+def XORi : LogicI<0x0e, "xori", xor>;
+def LUi : LoadUpper<0x0f, "lui">;
-// ADDiu just accept 16-bit immediates but we handle this on Pat's.
-// immZExt32 is used here so it can match GlobalAddress immediates.
-def ADDiu : ArithI<0x09, "addiu", add, uimm16, immZExt16>;
-def ADDi : ArithI<0x08, "addi", add, simm16, immSExt16>;
-def MUL : ArithR<0x1c, 0x02, "mul", mul, IIImul>;
+/// Arithmetic Instructions (3-Operand, R-Type)
def ADDu : ArithR<0x00, 0x21, "addu", add, IIAlu>;
def SUBu : ArithR<0x00, 0x23, "subu", sub, IIAlu>;
def ADD : ArithOverflowR<0x00, 0x20, "add">;
def SUB : ArithOverflowR<0x00, 0x22, "sub">;
-
-// Logical
+def SLT : SetCC_R<0x00, 0x2a, "slt", setlt>;
+def SLTu : SetCC_R<0x00, 0x2b, "sltu", setult>;
def AND : LogicR<0x24, "and", and>;
def OR : LogicR<0x25, "or", or>;
def XOR : LogicR<0x26, "xor", xor>;
-def ANDi : LogicI<0x0c, "andi", and>;
-def ORi : LogicI<0x0d, "ori", or>;
-def XORi : LogicI<0x0e, "xori", xor>;
def NOR : LogicNOR<0x00, 0x27, "nor">;
-// Shifts
+/// Shift Instructions
def SLL : LogicR_shift_imm<0x00, "sll", shl>;
def SRL : LogicR_shift_imm<0x02, "srl", srl>;
def SRA : LogicR_shift_imm<0x03, "sra", sra>;
def SRLV : LogicR_shift_reg<0x06, "srlv", srl>;
def SRAV : LogicR_shift_reg<0x07, "srav", sra>;
-// Load Upper Immediate
-def LUi : LoadUpper<0x0f, "lui">;
-
-// Load/Store
+/// Load and Store Instructions
def LB : LoadM<0x20, "lb", sextloadi8>;
def LBu : LoadM<0x24, "lbu", zextloadi8>;
def LH : LoadM<0x21, "lh", sextloadi16>;
def SH : StoreM<0x29, "sh", truncstorei16>;
def SW : StoreM<0x2b, "sw", store>;
-// Conditional Branch
+/// Jump and Branch Instructions
+def J : JumpFJ<0x02, "j">;
+def JR : JumpFR<0x00, 0x08, "jr">;
+def JAL : JumpLink<0x03, "jal">;
+def JALR : JumpLinkReg<0x00, 0x09, "jalr">;
def BEQ : CBranch<0x04, "beq", seteq>;
def BNE : CBranch<0x05, "bne", setne>;
let rt=1 in
-def BGEZ : CBranchZero<0x01, "bgez", setge>;
+ def BGEZ : CBranchZero<0x01, "bgez", setge>;
let rt=0 in {
-def BGTZ : CBranchZero<0x07, "bgtz", setgt>;
-def BLEZ : CBranchZero<0x07, "blez", setle>;
-def BLTZ : CBranchZero<0x01, "bltz", setlt>;
+ def BGTZ : CBranchZero<0x07, "bgtz", setgt>;
+ def BLEZ : CBranchZero<0x07, "blez", setle>;
+ def BLTZ : CBranchZero<0x01, "bltz", setlt>;
}
-// Set Condition Code
-def SLT : SetCC_R<0x00, 0x2a, "slt", setlt>;
-def SLTu : SetCC_R<0x00, 0x2b, "sltu", setult>;
-def SLTi : SetCC_I<0x0a, "slti", setlt, simm16, immSExt16>;
-def SLTiu : SetCC_I<0x0b, "sltiu", setult, uimm16, immZExt16>;
-
-// Unconditional jump
-def J : JumpFJ<0x02, "j">;
-def JR : JumpFR<0x00, 0x08, "jr">;
-
-// Jump and Link (Call)
-def JAL : JumpLink<0x03, "jal">;
-def JALR : JumpLinkReg<0x00, 0x09, "jalr">;
def BGEZAL : BranchLink<"bgezal">;
def BLTZAL : BranchLink<"bltzal">;
-// MulDiv and Move From Hi/Lo operations, have
-// their correpondent SDNodes created on ISelDAG.
-// Special Mul, Div operations
-def MULT : MulDiv<0x18, "mult", IIImul>;
-def MULTu : MulDiv<0x19, "multu", IIImul>;
-def DIV : MulDiv<0x1a, "div", IIIdiv>;
-def DIVu : MulDiv<0x1b, "divu", IIIdiv>;
-
-// Move From Hi/Lo
-def MFHI : MoveFromTo<0x10, "mfhi">;
-def MFLO : MoveFromTo<0x12, "mflo">;
-def MTHI : MoveFromTo<0x11, "mthi">;
-def MTLO : MoveFromTo<0x13, "mtlo">;
-
-// Count Leading
-// CLO/CLZ are part of the newer MIPS32(tm) instruction
-// set and not older Mips I keep this for future use
-// though.
-//def CLO : CountLeading<0x21, "clo">;
-//def CLZ : CountLeading<0x20, "clz">;
-
-// MADD*/MSUB* are not part of MipsI either.
-//def MADD : MArithR<0x00, "madd">;
-//def MADDU : MArithR<0x01, "maddu">;
-//def MSUB : MArithR<0x04, "msub">;
-//def MSUBU : MArithR<0x05, "msubu">;
-
-// No operation
-let addr=0 in
-def NOP : FJ<0, (outs), (ins), "nop", [], IIAlu>;
-
-// Ret instruction - as mips does not have "ret" a
-// jr $ra must be generated.
let isReturn=1, isTerminator=1, hasDelaySlot=1,
isBarrier=1, hasCtrlDep=1, rs=0, rt=0, shamt=0 in
-{
def RET : FR <0x00, 0x02, (outs), (ins CPURegs:$target),
- "jr $target", [(MipsRet CPURegs:$target)], IIBranch>;
+ "jr\t$target", [(MipsRet CPURegs:$target)], IIBranch>;
+
+/// Multiply and Divide Instructions.
+let Defs = [HI, LO] in {
+ def MULT : MulDiv<0x18, "mult", IIImul>;
+ def MULTu : MulDiv<0x19, "multu", IIImul>;
+ def DIV : MulDiv<0x1a, "div", IIIdiv>;
+ def DIVu : MulDiv<0x1b, "divu", IIIdiv>;
+}
+
+let Defs = [HI] in
+ def MTHI : MoveToLOHI<0x11, "mthi">;
+let Defs = [LO] in
+ def MTLO : MoveToLOHI<0x13, "mtlo">;
+
+let Uses = [HI] in
+ def MFHI : MoveFromLOHI<0x10, "mfhi">;
+let Uses = [LO] in
+ def MFLO : MoveFromLOHI<0x12, "mflo">;
+
+/// Sign Ext In Register Instructions.
+let Predicates = [HasSEInReg] in {
+ let shamt = 0x10, rs = 0 in
+ def SEB : SignExtInReg<0x21, "seb", i8>;
+
+ let shamt = 0x18, rs = 0 in
+ def SEH : SignExtInReg<0x20, "seh", i16>;
}
+/// Count Leading
+let Predicates = [HasBitCount] in {
+ let rt = 0 in
+ def CLZ : CountLeading<0b010110, "clz", ctlz>;
+}
+
+/// Byte Swap
+let Predicates = [HasSwap] in {
+ let shamt = 0x3, rs = 0 in
+ def WSBW : ByteSwap<0x20, "wsbw">;
+}
+
+/// Conditional Move
+def MIPS_CMOV_ZERO : PatLeaf<(i32 0)>;
+def MIPS_CMOV_NZERO : PatLeaf<(i32 1)>;
+
+let Predicates = [HasCondMov], isTwoAddress = 1 in {
+ def MOVN : CondMov<0x0a, "movn", MIPS_CMOV_NZERO>;
+ def MOVZ : CondMov<0x0b, "movz", MIPS_CMOV_ZERO>;
+}
+
+/// No operation
+let addr=0 in
+ def NOP : FJ<0, (outs), (ins), "nop", [], IIAlu>;
+
// FrameIndexes are legalized when they are operands from load/store
// instructions. The same not happens for stack address copies, so an
// add op with mem ComplexPattern is used and the stack address copy
// can be matched. It's similar to Sparc LEA_ADDRi
-def LEA_ADDiu : EffectiveAddress<"addiu $dst, ${addr:stackloc}">;
+def LEA_ADDiu : EffectiveAddress<"addiu\t$dst, ${addr:stackloc}">;
+
+// MADD*/MSUB* are not part of MipsI either.
+//def MADD : MArithR<0x00, "madd">;
+//def MADDU : MArithR<0x01, "maddu">;
+//def MSUB : MArithR<0x04, "msub">;
+//def MSUBU : MArithR<0x05, "msubu">;
+
+// MUL is a assembly macro in the current used ISAs. In recent ISA's
+// it is a real instruction.
+//def MUL : ArithR<0x1c, 0x02, "mul", mul, IIImul>;
//===----------------------------------------------------------------------===//
// Arbitrary patterns that map to one or more instructions
def : Pat<(i32 imm:$imm),
(ORi (LUi (HI16 imm:$imm)), (LO16 imm:$imm))>;
+// Carry patterns
+def : Pat<(subc CPURegs:$lhs, CPURegs:$rhs),
+ (SUBu CPURegs:$lhs, CPURegs:$rhs)>;
+def : Pat<(addc CPURegs:$lhs, CPURegs:$rhs),
+ (ADDu CPURegs:$lhs, CPURegs:$rhs)>;
+def : Pat<(addc CPURegs:$src, imm:$imm),
+ (ADDiu CPURegs:$src, imm:$imm)>;
+
// Call
def : Pat<(MipsJmpLink (i32 tglobaladdr:$dst)),
(JAL tglobaladdr:$dst)>;
def : Pat<(MipsJmpLink (i32 texternalsym:$dst)),
(JAL texternalsym:$dst)>;
-def : Pat<(MipsJmpLink CPURegs:$dst),
- (JALR CPURegs:$dst)>;
+//def : Pat<(MipsJmpLink CPURegs:$dst),
+// (JALR CPURegs:$dst)>;
-// GlobalAddress, Constant Pool, ExternalSymbol, and JumpTable
+// hi/lo relocs
def : Pat<(MipsHi tglobaladdr:$in), (LUi tglobaladdr:$in)>;
-def : Pat<(MipsLo tglobaladdr:$in), (ADDiu ZERO, tglobaladdr:$in)>;
def : Pat<(add CPURegs:$hi, (MipsLo tglobaladdr:$lo)),
(ADDiu CPURegs:$hi, tglobaladdr:$lo)>;
+
def : Pat<(MipsHi tjumptable:$in), (LUi tjumptable:$in)>;
-def : Pat<(MipsLo tjumptable:$in), (ADDiu ZERO, tjumptable:$in)>;
def : Pat<(add CPURegs:$hi, (MipsLo tjumptable:$lo)),
(ADDiu CPURegs:$hi, tjumptable:$lo)>;
-// Mips does not have not, so we increase the operation
+def : Pat<(MipsHi tconstpool:$in), (LUi tconstpool:$in)>;
+def : Pat<(add CPURegs:$hi, (MipsLo tconstpool:$lo)),
+ (ADDiu CPURegs:$hi, tconstpool:$lo)>;
+
+// gp_rel relocs
+def : Pat<(add CPURegs:$gp, (MipsGPRel tglobaladdr:$in)),
+ (ADDiu CPURegs:$gp, tglobaladdr:$in)>;
+def : Pat<(add CPURegs:$gp, (MipsGPRel tconstpool:$in)),
+ (ADDiu CPURegs:$gp, tconstpool:$in)>;
+
+// Mips does not have "not", so we expand our way
def : Pat<(not CPURegs:$in),
(NOR CPURegs:$in, ZERO)>;
// extended load and stores
-def : Pat<(i32 (extloadi1 addr:$src)), (LBu addr:$src)>;
-def : Pat<(i32 (extloadi8 addr:$src)), (LBu addr:$src)>;
-def : Pat<(i32 (extloadi16 addr:$src)), (LHu addr:$src)>;
+def : Pat<(extloadi1 addr:$src), (LBu addr:$src)>;
+def : Pat<(extloadi8 addr:$src), (LBu addr:$src)>;
+def : Pat<(extloadi16 addr:$src), (LHu addr:$src)>;
-// some peepholes
+// peepholes
def : Pat<(store (i32 0), addr:$dst), (SW ZERO, addr:$dst)>;
-///
-/// brcond patterns
-///
-
-// direct match equal/notequal zero branches
+// brcond patterns
def : Pat<(brcond (setne CPURegs:$lhs, 0), bb:$dst),
(BNE CPURegs:$lhs, ZERO, bb:$dst)>;
def : Pat<(brcond (seteq CPURegs:$lhs, 0), bb:$dst),
(BEQ CPURegs:$lhs, ZERO, bb:$dst)>;
def : Pat<(brcond (setge CPURegs:$lhs, CPURegs:$rhs), bb:$dst),
- (BGEZ (SUB CPURegs:$lhs, CPURegs:$rhs), bb:$dst)>;
+ (BEQ (SLT CPURegs:$lhs, CPURegs:$rhs), ZERO, bb:$dst)>;
def : Pat<(brcond (setuge CPURegs:$lhs, CPURegs:$rhs), bb:$dst),
- (BGEZ (SUBu CPURegs:$lhs, CPURegs:$rhs), bb:$dst)>;
-
-def : Pat<(brcond (setgt CPURegs:$lhs, CPURegs:$rhs), bb:$dst),
- (BGTZ (SUB CPURegs:$lhs, CPURegs:$rhs), bb:$dst)>;
-def : Pat<(brcond (setugt CPURegs:$lhs, CPURegs:$rhs), bb:$dst),
- (BGTZ (SUBu CPURegs:$lhs, CPURegs:$rhs), bb:$dst)>;
+ (BEQ (SLTu CPURegs:$lhs, CPURegs:$rhs), ZERO, bb:$dst)>;
+def : Pat<(brcond (setge CPURegs:$lhs, immSExt16:$rhs), bb:$dst),
+ (BEQ (SLTi CPURegs:$lhs, immSExt16:$rhs), ZERO, bb:$dst)>;
+def : Pat<(brcond (setuge CPURegs:$lhs, immSExt16:$rhs), bb:$dst),
+ (BEQ (SLTiu CPURegs:$lhs, immSExt16:$rhs), ZERO, bb:$dst)>;
def : Pat<(brcond (setle CPURegs:$lhs, CPURegs:$rhs), bb:$dst),
- (BLEZ (SUB CPURegs:$lhs, CPURegs:$rhs), bb:$dst)>;
+ (BEQ (SLT CPURegs:$rhs, CPURegs:$lhs), ZERO, bb:$dst)>;
def : Pat<(brcond (setule CPURegs:$lhs, CPURegs:$rhs), bb:$dst),
- (BLEZ (SUBu CPURegs:$lhs, CPURegs:$rhs), bb:$dst)>;
-
-def : Pat<(brcond (setlt CPURegs:$lhs, immSExt16:$rhs), bb:$dst),
- (BNE (SLTi CPURegs:$lhs, immSExt16:$rhs), ZERO, bb:$dst)>;
-def : Pat<(brcond (setult CPURegs:$lhs, immZExt16:$rhs), bb:$dst),
- (BNE (SLTiu CPURegs:$lhs, immZExt16:$rhs), ZERO, bb:$dst)>;
-def : Pat<(brcond (setlt CPURegs:$lhs, CPURegs:$rhs), bb:$dst),
- (BNE (SLT CPURegs:$lhs, CPURegs:$rhs), ZERO, bb:$dst)>;
-def : Pat<(brcond (setult CPURegs:$lhs, CPURegs:$rhs), bb:$dst),
- (BNE (SLTu CPURegs:$lhs, CPURegs:$rhs), ZERO, bb:$dst)>;
-
-def : Pat<(brcond (setlt CPURegs:$lhs, CPURegs:$rhs), bb:$dst),
- (BLTZ (SUB CPURegs:$lhs, CPURegs:$rhs), bb:$dst)>;
-def : Pat<(brcond (setult CPURegs:$lhs, CPURegs:$rhs), bb:$dst),
- (BLTZ (SUBu CPURegs:$lhs, CPURegs:$rhs), bb:$dst)>;
-
-// generic brcond pattern
+ (BEQ (SLTu CPURegs:$rhs, CPURegs:$lhs), ZERO, bb:$dst)>;
+
def : Pat<(brcond CPURegs:$cond, bb:$dst),
(BNE CPURegs:$cond, ZERO, bb:$dst)>;
-///
-/// setcc patterns, only matched when there
-/// is no brcond following a setcc operation
-///
+// select patterns
+def : Pat<(select (setge CPURegs:$lhs, CPURegs:$rhs), CPURegs:$T, CPURegs:$F),
+ (MOVZ CPURegs:$F, CPURegs:$T, (SLT CPURegs:$lhs, CPURegs:$rhs))>;
+def : Pat<(select (setuge CPURegs:$lhs, CPURegs:$rhs), CPURegs:$T, CPURegs:$F),
+ (MOVZ CPURegs:$F, CPURegs:$T, (SLTu CPURegs:$lhs, CPURegs:$rhs))>;
+def : Pat<(select (setge CPURegs:$lhs, immSExt16:$rhs), CPURegs:$T, CPURegs:$F),
+ (MOVZ CPURegs:$F, CPURegs:$T, (SLTi CPURegs:$lhs, immSExt16:$rhs))>;
+def : Pat<(select (setuge CPURegs:$lh, immSExt16:$rh), CPURegs:$T, CPURegs:$F),
+ (MOVZ CPURegs:$F, CPURegs:$T, (SLTiu CPURegs:$lh, immSExt16:$rh))>;
+
+def : Pat<(select (setle CPURegs:$lhs, CPURegs:$rhs), CPURegs:$T, CPURegs:$F),
+ (MOVZ CPURegs:$F, CPURegs:$T, (SLT CPURegs:$rhs, CPURegs:$lhs))>;
+def : Pat<(select (setule CPURegs:$lhs, CPURegs:$rhs), CPURegs:$T, CPURegs:$F),
+ (MOVZ CPURegs:$F, CPURegs:$T, (SLTu CPURegs:$rhs, CPURegs:$lhs))>;
+
+def : Pat<(select (seteq CPURegs:$lhs, CPURegs:$rhs), CPURegs:$T, CPURegs:$F),
+ (MOVZ CPURegs:$F, CPURegs:$T, (XOR CPURegs:$lhs, CPURegs:$rhs))>;
+def : Pat<(select (setne CPURegs:$lhs, CPURegs:$rhs), CPURegs:$T, CPURegs:$F),
+ (MOVN CPURegs:$F, CPURegs:$T, (XOR CPURegs:$lhs, CPURegs:$rhs))>;
+
+def : Pat<(select CPURegs:$cond, CPURegs:$T, CPURegs:$F),
+ (MOVN CPURegs:$F, CPURegs:$T, CPURegs:$cond)>;
+
+// setcc patterns
+def : Pat<(seteq CPURegs:$lhs, CPURegs:$rhs),
+ (SLTu (XOR CPURegs:$lhs, CPURegs:$rhs), 1)>;
+def : Pat<(setne CPURegs:$lhs, CPURegs:$rhs),
+ (SLTu ZERO, (XOR CPURegs:$lhs, CPURegs:$rhs))>;
-// setcc 2 register operands
def : Pat<(setle CPURegs:$lhs, CPURegs:$rhs),
(XORi (SLT CPURegs:$rhs, CPURegs:$lhs), 1)>;
def : Pat<(setule CPURegs:$lhs, CPURegs:$rhs),
def : Pat<(setuge CPURegs:$lhs, CPURegs:$rhs),
(XORi (SLTu CPURegs:$lhs, CPURegs:$rhs), 1)>;
-def : Pat<(setne CPURegs:$lhs, CPURegs:$rhs),
- (OR (SLT CPURegs:$lhs, CPURegs:$rhs),
- (SLT CPURegs:$rhs, CPURegs:$lhs))>;
-
-def : Pat<(seteq CPURegs:$lhs, CPURegs:$rhs),
- (XORi (OR (SLT CPURegs:$lhs, CPURegs:$rhs),
- (SLT CPURegs:$rhs, CPURegs:$lhs)), 1)>;
-
-// setcc reg/imm operands
def : Pat<(setge CPURegs:$lhs, immSExt16:$rhs),
(XORi (SLTi CPURegs:$lhs, immSExt16:$rhs), 1)>;
-def : Pat<(setuge CPURegs:$lhs, immZExt16:$rhs),
- (XORi (SLTiu CPURegs:$lhs, immZExt16:$rhs), 1)>;
+def : Pat<(setuge CPURegs:$lhs, immSExt16:$rhs),
+ (XORi (SLTiu CPURegs:$lhs, immSExt16:$rhs), 1)>;
+
+//===----------------------------------------------------------------------===//
+// Floating Point Support
+//===----------------------------------------------------------------------===//
+
+include "MipsInstrFPU.td"
+