-//===- MipsInstrInfo.td - Mips Register defs --------------------*- C++ -*-===//
+//===- MipsInstrInfo.td - Target Description for Mips Target -*- tablegen -*-=//
//
// The LLVM Compiler Infrastructure
//
-// This file was developed by Bruno Cardoso Lopes and is distributed under the
-// University of Illinois Open Source License. See LICENSE.TXT for details.
+// This file is distributed under the University of Illinois Open Source
+// License. See LICENSE.TXT for details.
+//
+//===----------------------------------------------------------------------===//
+//
+// This file contains the Mips implementation of the TargetInstrInfo class.
//
//===----------------------------------------------------------------------===//
// Mips profiles and nodes
//===----------------------------------------------------------------------===//
+def SDT_MipsRet : SDTypeProfile<0, 1, [SDTCisInt<0>]>;
+def SDT_MipsJmpLink : SDTypeProfile<0, 1, [SDTCisVT<0, iPTR>]>;
+def SDT_MipsCMov : SDTypeProfile<1, 4, [SDTCisSameAs<0, 1>,
+ SDTCisSameAs<1, 2>,
+ SDTCisSameAs<3, 4>,
+ SDTCisInt<4>]>;
+def SDT_MipsCallSeqStart : SDCallSeqStart<[SDTCisVT<0, i32>]>;
+def SDT_MipsCallSeqEnd : SDCallSeqEnd<[SDTCisVT<0, i32>, SDTCisVT<1, i32>]>;
+def SDT_MipsMAddMSub : SDTypeProfile<0, 4,
+ [SDTCisVT<0, i32>, SDTCisSameAs<0, 1>,
+ SDTCisSameAs<1, 2>,
+ SDTCisSameAs<2, 3>]>;
+def SDT_MipsDivRem : SDTypeProfile<0, 2,
+ [SDTCisVT<0, i32>,
+ SDTCisSameAs<0, 1>]>;
+
+def SDT_MipsThreadPointer : SDTypeProfile<1, 0, [SDTCisPtrTy<0>]>;
+
+def SDT_MipsDynAlloc : SDTypeProfile<1, 1, [SDTCisVT<0, i32>,
+ SDTCisVT<1, iPTR>]>;
+def SDT_Sync : SDTypeProfile<0, 1, [SDTCisVT<0, i32>]>;
+
+def SDT_Ext : SDTypeProfile<1, 3, [SDTCisVT<0, i32>, SDTCisSameAs<0, 1>,
+ SDTCisInt<2>, SDTCisSameAs<2, 3>]>;
+def SDT_Ins : SDTypeProfile<1, 4, [SDTCisVT<0, i32>, SDTCisSameAs<0, 1>,
+ SDTCisInt<2>, SDTCisSameAs<2, 3>,
+ SDTCisSameAs<0, 4>]>;
+
// Call
-def SDT_MipsJmpLink : SDTypeProfile<0, 1, [SDTCisVT<0, iPTR>]>;
-def MipsJmpLink : SDNode<"MipsISD::JmpLink",SDT_MipsJmpLink, [SDNPHasChain,
- SDNPOutFlag]>;
+def MipsJmpLink : SDNode<"MipsISD::JmpLink",SDT_MipsJmpLink,
+ [SDNPHasChain, SDNPOutGlue, SDNPOptInGlue,
+ SDNPVariadic]>;
-// Hi and Lo nodes are used to handle global addresses. Used on
-// MipsISelLowering to lower stuff like GlobalAddress, ExternalSymbol
+// Hi and Lo nodes are used to handle global addresses. Used on
+// MipsISelLowering to lower stuff like GlobalAddress, ExternalSymbol
// static model. (nothing to do with Mips Registers Hi and Lo)
-def MipsHi : SDNode<"MipsISD::Hi", SDTIntUnaryOp, [SDNPOutFlag]>;
-def MipsLo : SDNode<"MipsISD::Lo", SDTIntUnaryOp>;
+def MipsHi : SDNode<"MipsISD::Hi", SDTIntUnaryOp>;
+def MipsLo : SDNode<"MipsISD::Lo", SDTIntUnaryOp>;
+def MipsGPRel : SDNode<"MipsISD::GPRel", SDTIntUnaryOp>;
+
+// TlsGd node is used to handle General Dynamic TLS
+def MipsTlsGd : SDNode<"MipsISD::TlsGd", SDTIntUnaryOp>;
+
+// TprelHi and TprelLo nodes are used to handle Local Exec TLS
+def MipsTprelHi : SDNode<"MipsISD::TprelHi", SDTIntUnaryOp>;
+def MipsTprelLo : SDNode<"MipsISD::TprelLo", SDTIntUnaryOp>;
+
+// Thread pointer
+def MipsThreadPointer: SDNode<"MipsISD::ThreadPointer", SDT_MipsThreadPointer>;
// Return
-def SDT_MipsRet : SDTypeProfile<0, 1, [SDTCisInt<0>]>;
-def MipsRet : SDNode<"MipsISD::Ret", SDT_MipsRet, [SDNPHasChain,
- SDNPOptInFlag]>;
+def MipsRet : SDNode<"MipsISD::Ret", SDT_MipsRet, [SDNPHasChain,
+ SDNPOptInGlue]>;
// These are target-independent nodes, but have target-specific formats.
-def SDT_MipsCallSeq_start : SDTypeProfile<0, 1, [SDTCisVT<0, i32>]>;
-def SDT_MipsCallSeq_end : SDTypeProfile<0, 2, [SDTCisVT<0, i32>,
- SDTCisVT<1, i32>]>;
-
-def callseq_start : SDNode<"ISD::CALLSEQ_START", SDT_MipsCallSeq_start,
- [SDNPHasChain, SDNPOutFlag]>;
-def callseq_end : SDNode<"ISD::CALLSEQ_END", SDT_MipsCallSeq_end,
- [SDNPHasChain, SDNPOptInFlag, SDNPOutFlag]>;
+def callseq_start : SDNode<"ISD::CALLSEQ_START", SDT_MipsCallSeqStart,
+ [SDNPHasChain, SDNPOutGlue]>;
+def callseq_end : SDNode<"ISD::CALLSEQ_END", SDT_MipsCallSeqEnd,
+ [SDNPHasChain, SDNPOptInGlue, SDNPOutGlue]>;
+
+// MAdd*/MSub* nodes
+def MipsMAdd : SDNode<"MipsISD::MAdd", SDT_MipsMAddMSub,
+ [SDNPOptInGlue, SDNPOutGlue]>;
+def MipsMAddu : SDNode<"MipsISD::MAddu", SDT_MipsMAddMSub,
+ [SDNPOptInGlue, SDNPOutGlue]>;
+def MipsMSub : SDNode<"MipsISD::MSub", SDT_MipsMAddMSub,
+ [SDNPOptInGlue, SDNPOutGlue]>;
+def MipsMSubu : SDNode<"MipsISD::MSubu", SDT_MipsMAddMSub,
+ [SDNPOptInGlue, SDNPOutGlue]>;
+
+// DivRem(u) nodes
+def MipsDivRem : SDNode<"MipsISD::DivRem", SDT_MipsDivRem,
+ [SDNPOutGlue]>;
+def MipsDivRemU : SDNode<"MipsISD::DivRemU", SDT_MipsDivRem,
+ [SDNPOutGlue]>;
+
+// Target constant nodes that are not part of any isel patterns and remain
+// unchanged can cause instructions with illegal operands to be emitted.
+// Wrapper node patterns give the instruction selector a chance to replace
+// target constant nodes that would otherwise remain unchanged with ADDiu
+// nodes. Without these wrapper node patterns, the following conditional move
+// instrucion is emitted when function cmov2 in test/CodeGen/Mips/cmov.ll is
+// compiled:
+// movn %got(d)($gp), %got(c)($gp), $4
+// This instruction is illegal since movn can take only register operands.
+
+def MipsWrapperPIC : SDNode<"MipsISD::WrapperPIC", SDTIntUnaryOp>;
+
+// Pointer to dynamically allocated stack area.
+def MipsDynAlloc : SDNode<"MipsISD::DynAlloc", SDT_MipsDynAlloc,
+ [SDNPHasChain, SDNPInGlue]>;
+
+def MipsSync : SDNode<"MipsISD::Sync", SDT_Sync, [SDNPHasChain]>;
+
+def MipsExt : SDNode<"MipsISD::Ext", SDT_Ext>;
+def MipsIns : SDNode<"MipsISD::Ins", SDT_Ins>;
//===----------------------------------------------------------------------===//
// Mips Instruction Predicate Definitions.
//===----------------------------------------------------------------------===//
-def IsStatic : Predicate<"TM.getRelocationModel() == Reloc::Static">;
+def HasSEInReg : Predicate<"Subtarget.hasSEInReg()">;
+def HasBitCount : Predicate<"Subtarget.hasBitCount()">;
+def HasSwap : Predicate<"Subtarget.hasSwap()">;
+def HasCondMov : Predicate<"Subtarget.hasCondMov()">;
+def IsMips32 : Predicate<"Subtarget.isMips32()">;
+def IsMips32r2 : Predicate<"Subtarget.isMips32r2()">;
//===----------------------------------------------------------------------===//
// Mips Operand, Complex Patterns and Transformations Definitions.
// Instruction operand types
def brtarget : Operand<OtherVT>;
def calltarget : Operand<i32>;
-def uimm16 : Operand<i32>;
def simm16 : Operand<i32>;
def shamt : Operand<i32>;
-def addrlabel : Operand<i32>;
+
+// Unsigned Operand
+def uimm16 : Operand<i32> {
+ let PrintMethod = "printUnsignedImm";
+}
// Address operand
def mem : Operand<i32> {
let PrintMethod = "printMemOperand";
- let MIOperandInfo = (ops simm16, CPURegs);
+ let MIOperandInfo = (ops CPURegs, simm16);
+}
+
+def mem_ea : Operand<i32> {
+ let PrintMethod = "printMemOperandEA";
+ let MIOperandInfo = (ops CPURegs, simm16);
}
// Transformation Function - get the lower 16 bits.
def LO16 : SDNodeXForm<imm, [{
- return getI32Imm((unsigned)N->getValue() & 0xFFFF);
+ return getI32Imm((unsigned)N->getZExtValue() & 0xFFFF);
}]>;
// Transformation Function - get the higher 16 bits.
def HI16 : SDNodeXForm<imm, [{
- return getI32Imm((unsigned)N->getValue() >> 16);
+ return getI32Imm((unsigned)N->getZExtValue() >> 16);
}]>;
// Node immediate fits as 16-bit sign extended on target immediate.
// e.g. addi, andi
-def immSExt16 : PatLeaf<(imm), [{
- if (N->getValueType(0) == MVT::i32)
- return (int32_t)N->getValue() == (short)N->getValue();
- else
- return (int64_t)N->getValue() == (short)N->getValue();
-}]>;
+def immSExt16 : PatLeaf<(imm), [{ return isInt<16>(N->getSExtValue()); }]>;
// Node immediate fits as 16-bit zero extended on target immediate.
// The LO16 param means that only the lower 16 bits of the node
// e.g. addiu, sltiu
def immZExt16 : PatLeaf<(imm), [{
if (N->getValueType(0) == MVT::i32)
- return (uint32_t)N->getValue() == (unsigned short)N->getValue();
+ return (uint32_t)N->getZExtValue() == (unsigned short)N->getZExtValue();
else
- return (uint64_t)N->getValue() == (unsigned short)N->getValue();
+ return (uint64_t)N->getZExtValue() == (unsigned short)N->getZExtValue();
}], LO16>;
-// Node immediate fits as 32-bit zero extended on target immediate.
-//def immZExt32 : PatLeaf<(imm), [{
-// return (uint64_t)N->getValue() == (uint32_t)N->getValue();
-//}], LO16>;
-
// shamt field must fit in 5 bits.
def immZExt5 : PatLeaf<(imm), [{
- return N->getValue() == ((N->getValue()) & 0x1f) ;
+ return N->getZExtValue() == ((N->getZExtValue()) & 0x1f) ;
}]>;
// Mips Address Mode! SDNode frameindex could possibily be a match
// since load and store instructions from stack used it.
-def addr : ComplexPattern<i32, 2, "SelectAddr", [frameindex], []>;
+def addr : ComplexPattern<iPTR, 2, "SelectAddr", [frameindex], []>;
//===----------------------------------------------------------------------===//
// Instructions specific format
//===----------------------------------------------------------------------===//
// Arithmetic 3 register operands
-let isCommutable = 1 in
class ArithR<bits<6> op, bits<6> func, string instr_asm, SDNode OpNode,
- InstrItinClass itin>:
- FR< op,
- func,
- (outs CPURegs:$dst),
- (ins CPURegs:$b, CPURegs:$c),
- !strconcat(instr_asm, " $dst, $b, $c"),
- [(set CPURegs:$dst, (OpNode CPURegs:$b, CPURegs:$c))], itin>;
+ InstrItinClass itin, bit isComm = 0>:
+ FR<op, func, (outs CPURegs:$dst), (ins CPURegs:$b, CPURegs:$c),
+ !strconcat(instr_asm, "\t$dst, $b, $c"),
+ [(set CPURegs:$dst, (OpNode CPURegs:$b, CPURegs:$c))], itin> {
+ let isCommutable = isComm;
+}
-let isCommutable = 1 in
-class ArithOverflowR<bits<6> op, bits<6> func, string instr_asm>:
- FR< op,
- func,
- (outs CPURegs:$dst),
- (ins CPURegs:$b, CPURegs:$c),
- !strconcat(instr_asm, " $dst, $b, $c"),
- [], IIAlu>;
+class ArithOverflowR<bits<6> op, bits<6> func, string instr_asm,
+ bit isComm = 0>:
+ FR<op, func, (outs CPURegs:$dst), (ins CPURegs:$b, CPURegs:$c),
+ !strconcat(instr_asm, "\t$dst, $b, $c"), [], IIAlu> {
+ let isCommutable = isComm;
+}
// Arithmetic 2 register operands
-let isCommutable = 1 in
class ArithI<bits<6> op, string instr_asm, SDNode OpNode,
Operand Od, PatLeaf imm_type> :
- FI< op,
- (outs CPURegs:$dst),
- (ins CPURegs:$b, Od:$c),
- !strconcat(instr_asm, " $dst, $b, $c"),
- [(set CPURegs:$dst, (OpNode CPURegs:$b, imm_type:$c))], IIAlu>;
+ FI<op, (outs CPURegs:$dst), (ins CPURegs:$b, Od:$c),
+ !strconcat(instr_asm, "\t$dst, $b, $c"),
+ [(set CPURegs:$dst, (OpNode CPURegs:$b, imm_type:$c))], IIAlu>;
+
+class ArithOverflowI<bits<6> op, string instr_asm, SDNode OpNode,
+ Operand Od, PatLeaf imm_type> :
+ FI<op, (outs CPURegs:$dst), (ins CPURegs:$b, Od:$c),
+ !strconcat(instr_asm, "\t$dst, $b, $c"), [], IIAlu>;
// Arithmetic Multiply ADD/SUB
-let rd=0 in
-class MArithR<bits<6> func, string instr_asm> :
- FR< 0x1c,
- func,
- (outs CPURegs:$rs),
- (ins CPURegs:$rt),
- !strconcat(instr_asm, " $rs, $rt"),
- [], IIImul>;
+let rd = 0, shamt = 0, Defs = [HI, LO], Uses = [HI, LO] in
+class MArithR<bits<6> func, string instr_asm, SDNode op, bit isComm = 0> :
+ FR<0x1c, func, (outs), (ins CPURegs:$rs, CPURegs:$rt),
+ !strconcat(instr_asm, "\t$rs, $rt"),
+ [(op CPURegs:$rs, CPURegs:$rt, LO, HI)], IIImul> {
+ let isCommutable = isComm;
+}
// Logical
+let isCommutable = 1 in
class LogicR<bits<6> func, string instr_asm, SDNode OpNode>:
- FR< 0x00,
- func,
- (outs CPURegs:$dst),
- (ins CPURegs:$b, CPURegs:$c),
- !strconcat(instr_asm, " $dst, $b, $c"),
- [(set CPURegs:$dst, (OpNode CPURegs:$b, CPURegs:$c))], IIAlu>;
+ FR<0x00, func, (outs CPURegs:$dst), (ins CPURegs:$b, CPURegs:$c),
+ !strconcat(instr_asm, "\t$dst, $b, $c"),
+ [(set CPURegs:$dst, (OpNode CPURegs:$b, CPURegs:$c))], IIAlu>;
class LogicI<bits<6> op, string instr_asm, SDNode OpNode>:
- FI< op,
- (outs CPURegs:$dst),
- (ins CPURegs:$b, uimm16:$c),
- !strconcat(instr_asm, " $dst, $b, $c"),
- [(set CPURegs:$dst, (OpNode CPURegs:$b, immSExt16:$c))], IIAlu>;
+ FI<op, (outs CPURegs:$dst), (ins CPURegs:$b, uimm16:$c),
+ !strconcat(instr_asm, "\t$dst, $b, $c"),
+ [(set CPURegs:$dst, (OpNode CPURegs:$b, immZExt16:$c))], IIAlu>;
+let isCommutable = 1 in
class LogicNOR<bits<6> op, bits<6> func, string instr_asm>:
- FR< op,
- func,
- (outs CPURegs:$dst),
- (ins CPURegs:$b, CPURegs:$c),
- !strconcat(instr_asm, " $dst, $b, $c"),
- [(set CPURegs:$dst, (not (or CPURegs:$b, CPURegs:$c)))], IIAlu>;
+ FR<op, func, (outs CPURegs:$dst), (ins CPURegs:$b, CPURegs:$c),
+ !strconcat(instr_asm, "\t$dst, $b, $c"),
+ [(set CPURegs:$dst, (not (or CPURegs:$b, CPURegs:$c)))], IIAlu>;
// Shifts
-let rt = 0 in
-class LogicR_shift_imm<bits<6> func, string instr_asm, SDNode OpNode>:
- FR< 0x00,
- func,
- (outs CPURegs:$dst),
- (ins CPURegs:$b, shamt:$c),
- !strconcat(instr_asm, " $dst, $b, $c"),
- [(set CPURegs:$dst, (OpNode CPURegs:$b, immZExt5:$c))], IIAlu>;
+class LogicR_shift_rotate_imm<bits<6> func, bits<5> _rs, string instr_asm,
+ SDNode OpNode>:
+ FR<0x00, func, (outs CPURegs:$dst), (ins CPURegs:$b, shamt:$c),
+ !strconcat(instr_asm, "\t$dst, $b, $c"),
+ [(set CPURegs:$dst, (OpNode CPURegs:$b, immZExt5:$c))], IIAlu> {
+ let rs = _rs;
+}
-class LogicR_shift_reg<bits<6> func, string instr_asm, SDNode OpNode>:
- FR< 0x00,
- func,
- (outs CPURegs:$dst),
- (ins CPURegs:$b, CPURegs:$c),
- !strconcat(instr_asm, " $dst, $b, $c"),
- [(set CPURegs:$dst, (OpNode CPURegs:$b, CPURegs:$c))], IIAlu>;
+class LogicR_shift_rotate_reg<bits<6> func, bits<5> _shamt, string instr_asm,
+ SDNode OpNode>:
+ FR<0x00, func, (outs CPURegs:$dst), (ins CPURegs:$c, CPURegs:$b),
+ !strconcat(instr_asm, "\t$dst, $b, $c"),
+ [(set CPURegs:$dst, (OpNode CPURegs:$b, CPURegs:$c))], IIAlu> {
+ let shamt = _shamt;
+}
// Load Upper Imediate
class LoadUpper<bits<6> op, string instr_asm>:
FI< op,
(outs CPURegs:$dst),
(ins uimm16:$imm),
- !strconcat(instr_asm, " $dst, $imm"),
+ !strconcat(instr_asm, "\t$dst, $imm"),
[], IIAlu>;
// Memory Load/Store
-let isLoad = 1, hasDelaySlot = 1 in
+let canFoldAsLoad = 1, hasDelaySlot = 1 in
class LoadM<bits<6> op, string instr_asm, PatFrag OpNode>:
- FI< op,
- (outs CPURegs:$dst),
- (ins mem:$addr),
- !strconcat(instr_asm, " $dst, $addr"),
- [(set CPURegs:$dst, (OpNode addr:$addr))], IILoad>;
+ FI<op, (outs CPURegs:$dst), (ins mem:$addr),
+ !strconcat(instr_asm, "\t$dst, $addr"),
+ [(set CPURegs:$dst, (OpNode addr:$addr))], IILoad>;
-let isStore = 1 in
class StoreM<bits<6> op, string instr_asm, PatFrag OpNode>:
- FI< op,
- (outs),
- (ins CPURegs:$dst, mem:$addr),
- !strconcat(instr_asm, " $dst, $addr"),
- [(OpNode CPURegs:$dst, addr:$addr)], IIStore>;
+ FI<op, (outs), (ins CPURegs:$dst, mem:$addr),
+ !strconcat(instr_asm, "\t$dst, $addr"),
+ [(OpNode CPURegs:$dst, addr:$addr)], IIStore>;
// Conditional Branch
let isBranch = 1, isTerminator=1, hasDelaySlot = 1 in {
class CBranch<bits<6> op, string instr_asm, PatFrag cond_op>:
- FI< op,
- (outs),
- (ins CPURegs:$a, CPURegs:$b, brtarget:$offset),
- !strconcat(instr_asm, " $a, $b, $offset"),
- [(brcond (cond_op CPURegs:$a, CPURegs:$b), bb:$offset)],
- IIBranch>;
-
+ FI<op, (outs), (ins CPURegs:$a, CPURegs:$b, brtarget:$offset),
+ !strconcat(instr_asm, "\t$a, $b, $offset"),
+ [(brcond (cond_op CPURegs:$a, CPURegs:$b), bb:$offset)],
+ IIBranch>;
class CBranchZero<bits<6> op, string instr_asm, PatFrag cond_op>:
- FI< op,
- (outs),
- (ins CPURegs:$src, brtarget:$offset),
- !strconcat(instr_asm, " $src, $offset"),
- [(brcond (cond_op CPURegs:$src, 0), bb:$offset)],
- IIBranch>;
+ FI<op, (outs), (ins CPURegs:$src, brtarget:$offset),
+ !strconcat(instr_asm, "\t$src, $offset"),
+ [(brcond (cond_op CPURegs:$src, 0), bb:$offset)],
+ IIBranch>;
}
// SetCC
class SetCC_R<bits<6> op, bits<6> func, string instr_asm,
PatFrag cond_op>:
- FR< op,
- func,
- (outs CPURegs:$dst),
- (ins CPURegs:$b, CPURegs:$c),
- !strconcat(instr_asm, " $dst, $b, $c"),
- [(set CPURegs:$dst, (cond_op CPURegs:$b, CPURegs:$c))],
- IIAlu>;
+ FR<op, func, (outs CPURegs:$dst), (ins CPURegs:$b, CPURegs:$c),
+ !strconcat(instr_asm, "\t$dst, $b, $c"),
+ [(set CPURegs:$dst, (cond_op CPURegs:$b, CPURegs:$c))],
+ IIAlu>;
class SetCC_I<bits<6> op, string instr_asm, PatFrag cond_op,
Operand Od, PatLeaf imm_type>:
- FI< op,
- (outs CPURegs:$dst),
- (ins CPURegs:$b, Od:$c),
- !strconcat(instr_asm, " $dst, $b, $c"),
- [(set CPURegs:$dst, (cond_op CPURegs:$b, imm_type:$c))],
- IIAlu>;
+ FI<op, (outs CPURegs:$dst), (ins CPURegs:$b, Od:$c),
+ !strconcat(instr_asm, "\t$dst, $b, $c"),
+ [(set CPURegs:$dst, (cond_op CPURegs:$b, imm_type:$c))],
+ IIAlu>;
// Unconditional branch
let isBranch=1, isTerminator=1, isBarrier=1, hasDelaySlot = 1 in
class JumpFJ<bits<6> op, string instr_asm>:
- FJ< op,
- (outs),
- (ins brtarget:$target),
- !strconcat(instr_asm, " $target"),
- [(br bb:$target)], IIBranch>;
+ FJ<op, (outs), (ins brtarget:$target),
+ !strconcat(instr_asm, "\t$target"), [(br bb:$target)], IIBranch>;
let isBranch=1, isTerminator=1, isBarrier=1, rd=0, hasDelaySlot = 1 in
class JumpFR<bits<6> op, bits<6> func, string instr_asm>:
- FR< op,
- func,
- (outs),
- (ins CPURegs:$target),
- !strconcat(instr_asm, " $target"),
- [(brind CPURegs:$target)], IIBranch>;
+ FR<op, func, (outs), (ins CPURegs:$target),
+ !strconcat(instr_asm, "\t$target"), [(brind CPURegs:$target)], IIBranch>;
// Jump and Link (Call)
let isCall=1, hasDelaySlot=1,
// All calls clobber the non-callee saved registers...
- Defs = [AT, V0, V1, A0, A1, A2, A3, T0, T1, T2,
- T3, T4, T5, T6, T7, T8, T9, K0, K1], Uses = [GP] in {
+ Defs = [AT, V0, V1, A0, A1, A2, A3, T0, T1, T2, T3, T4, T5, T6, T7, T8, T9,
+ K0, K1, D0, D1, D2, D3, D4, D5, D6, D7, D8, D9], Uses = [GP] in {
class JumpLink<bits<6> op, string instr_asm>:
- FJ< op,
- (outs),
- (ins calltarget:$target),
- !strconcat(instr_asm, " $target"),
- [(MipsJmpLink imm:$target)], IIBranch>;
+ FJ<op, (outs), (ins calltarget:$target, variable_ops),
+ !strconcat(instr_asm, "\t$target"), [(MipsJmpLink imm:$target)],
+ IIBranch>;
let rd=31 in
class JumpLinkReg<bits<6> op, bits<6> func, string instr_asm>:
- FR< op,
- func,
- (outs),
- (ins CPURegs:$rs),
- !strconcat(instr_asm, " $rs"),
- [(MipsJmpLink CPURegs:$rs)], IIBranch>;
+ FR<op, func, (outs), (ins CPURegs:$rs, variable_ops),
+ !strconcat(instr_asm, "\t$rs"), [(MipsJmpLink CPURegs:$rs)], IIBranch>;
class BranchLink<string instr_asm>:
- FI< 0x1,
- (outs),
- (ins CPURegs:$rs, brtarget:$target),
- !strconcat(instr_asm, " $rs, $target"),
- [], IIBranch>;
+ FI<0x1, (outs), (ins CPURegs:$rs, brtarget:$target, variable_ops),
+ !strconcat(instr_asm, "\t$rs, $target"), [], IIBranch>;
}
// Mul, Div
-class MulDiv<bits<6> func, string instr_asm, InstrItinClass itin>:
- FR< 0x00,
- func,
- (outs),
- (ins CPURegs:$a, CPURegs:$b),
- !strconcat(instr_asm, " $a, $b"),
- [], itin>;
+let Defs = [HI, LO] in {
+ let isCommutable = 1 in
+ class Mul<bits<6> func, string instr_asm, InstrItinClass itin>:
+ FR<0x00, func, (outs), (ins CPURegs:$a, CPURegs:$b),
+ !strconcat(instr_asm, "\t$a, $b"), [], itin>;
+
+ class Div<SDNode op, bits<6> func, string instr_asm, InstrItinClass itin>:
+ FR<0x00, func, (outs), (ins CPURegs:$a, CPURegs:$b),
+ !strconcat(instr_asm, "\t$$zero, $a, $b"),
+ [(op CPURegs:$a, CPURegs:$b)], itin>;
+}
// Move from Hi/Lo
-class MoveFromTo<bits<6> func, string instr_asm>:
- FR< 0x00,
- func,
- (outs CPURegs:$dst),
- (ins),
- !strconcat(instr_asm, " $dst"),
- [], IIHiLo>;
+class MoveFromLOHI<bits<6> func, string instr_asm>:
+ FR<0x00, func, (outs CPURegs:$dst), (ins),
+ !strconcat(instr_asm, "\t$dst"), [], IIHiLo>;
-// Count Leading Ones/Zeros in Word
-class CountLeading<bits<6> func, string instr_asm>:
- FR< 0x1c,
- func,
- (outs CPURegs:$dst),
- (ins CPURegs:$src),
- !strconcat(instr_asm, " $dst, $src"),
- [], IIAlu>;
+class MoveToLOHI<bits<6> func, string instr_asm>:
+ FR<0x00, func, (outs), (ins CPURegs:$src),
+ !strconcat(instr_asm, "\t$src"), [], IIHiLo>;
class EffectiveAddress<string instr_asm> :
- FI<0x09,
- (outs CPURegs:$dst),
- (ins mem:$addr),
- instr_asm,
- [(set CPURegs:$dst, addr:$addr)], IIAlu>;
+ FI<0x09, (outs CPURegs:$dst), (ins mem_ea:$addr),
+ instr_asm, [(set CPURegs:$dst, addr:$addr)], IIAlu>;
+
+// Count Leading Ones/Zeros in Word
+class CountLeading<bits<6> func, string instr_asm, list<dag> pattern>:
+ FR<0x1c, func, (outs CPURegs:$dst), (ins CPURegs:$src),
+ !strconcat(instr_asm, "\t$dst, $src"), pattern, IIAlu>,
+ Requires<[HasBitCount]> {
+ let shamt = 0;
+ let rt = rd;
+}
+
+// Sign Extend in Register.
+class SignExtInReg<bits<6> func, string instr_asm, ValueType vt>:
+ FR<0x3f, func, (outs CPURegs:$dst), (ins CPURegs:$src),
+ !strconcat(instr_asm, "\t$dst, $src"),
+ [(set CPURegs:$dst, (sext_inreg CPURegs:$src, vt))], NoItinerary>;
+
+// Byte Swap
+class ByteSwap<bits<6> func, string instr_asm>:
+ FR<0x1f, func, (outs CPURegs:$dst), (ins CPURegs:$src),
+ !strconcat(instr_asm, "\t$dst, $src"),
+ [(set CPURegs:$dst, (bswap CPURegs:$src))], NoItinerary>;
+
+// Conditional Move
+class CondMov<bits<6> func, string instr_asm, PatLeaf MovCode>:
+ FR<0x00, func, (outs CPURegs:$dst), (ins CPURegs:$F, CPURegs:$T,
+ CPURegs:$cond), !strconcat(instr_asm, "\t$dst, $T, $cond"),
+ [], NoItinerary>;
+
+// Read Hardware
+class ReadHardware: FR<0x1f, 0x3b, (outs CPURegs:$dst), (ins HWRegs:$src),
+ "rdhwr\t$dst, $src", [], IIAlu> {
+ let rs = 0;
+ let shamt = 0;
+}
+
+// Ext and Ins
+class ExtIns<bits<6> _funct, string instr_asm, dag outs, dag ins,
+ list<dag> pattern, InstrItinClass itin>:
+ FR<0x1f, _funct, outs, ins, !strconcat(instr_asm, " $rt, $rs, $pos, $sz"),
+ pattern, itin>, Requires<[IsMips32r2]> {
+ bits<5> pos;
+ bits<5> sz;
+ let rd = sz;
+ let shamt = pos;
+}
+
+// Atomic instructions with 2 source operands (ATOMIC_SWAP & ATOMIC_LOAD_*).
+class Atomic2Ops<PatFrag Op, string Opstr> :
+ MipsPseudo<(outs CPURegs:$dst), (ins CPURegs:$ptr, CPURegs:$incr),
+ !strconcat("atomic_", Opstr, "\t$dst, $ptr, $incr"),
+ [(set CPURegs:$dst,
+ (Op CPURegs:$ptr, CPURegs:$incr))]>;
+
+// Atomic Compare & Swap.
+class AtomicCmpSwap<PatFrag Op, string Width> :
+ MipsPseudo<(outs CPURegs:$dst),
+ (ins CPURegs:$ptr, CPURegs:$cmp, CPURegs:$swap),
+ !strconcat("atomic_cmp_swap_", Width,
+ "\t$dst, $ptr, $cmp, $swap"),
+ [(set CPURegs:$dst,
+ (Op CPURegs:$ptr, CPURegs:$cmp, CPURegs:$swap))]>;
//===----------------------------------------------------------------------===//
// Pseudo instructions
// As stack alignment is always done with addiu, we need a 16-bit immediate
let Defs = [SP], Uses = [SP] in {
-def ADJCALLSTACKDOWN : PseudoInstMips<(outs), (ins uimm16:$amt),
- "!ADJCALLSTACKDOWN $amt",
- [(callseq_start imm:$amt)]>;
-def ADJCALLSTACKUP : PseudoInstMips<(outs), (ins uimm16:$amt1, uimm16:$amt2),
- "!ADJCALLSTACKUP $amt1",
- [(callseq_end imm:$amt1, imm:$amt2)]>;
+def ADJCALLSTACKDOWN : MipsPseudo<(outs), (ins uimm16:$amt),
+ "!ADJCALLSTACKDOWN $amt",
+ [(callseq_start timm:$amt)]>;
+def ADJCALLSTACKUP : MipsPseudo<(outs), (ins uimm16:$amt1, uimm16:$amt2),
+ "!ADJCALLSTACKUP $amt1",
+ [(callseq_end timm:$amt1, timm:$amt2)]>;
}
-def IMPLICIT_DEF_CPURegs : PseudoInstMips<(outs CPURegs:$dst), (ins),
- "!IMPLICIT_DEF $dst",
- [(set CPURegs:$dst, (undef))]>;
+// Some assembly macros need to avoid pseudoinstructions and assembler
+// automatic reodering, we should reorder ourselves.
+def MACRO : MipsPseudo<(outs), (ins), ".set\tmacro", []>;
+def REORDER : MipsPseudo<(outs), (ins), ".set\treorder", []>;
+def NOMACRO : MipsPseudo<(outs), (ins), ".set\tnomacro", []>;
+def NOREORDER : MipsPseudo<(outs), (ins), ".set\tnoreorder", []>;
+
+// These macros are inserted to prevent GAS from complaining
+// when using the AT register.
+def NOAT : MipsPseudo<(outs), (ins), ".set\tnoat", []>;
+def ATMACRO : MipsPseudo<(outs), (ins), ".set\tat", []>;
// When handling PIC code the assembler needs .cpload and .cprestore
// directives. If the real instructions corresponding these directives
// are used, we have the same behavior, but get also a bunch of warnings
// from the assembler.
-def CPLOAD: PseudoInstMips<(outs), (ins CPURegs:$reg),
- ".set noreorder\n\t.cpload $reg\n\t.set reorder\n", []>;
-def CPRESTORE: PseudoInstMips<(outs), (ins uimm16:$loc),
- ".cprestore $loc\n", []>;
+def CPLOAD : MipsPseudo<(outs), (ins CPURegs:$picreg), ".cpload\t$picreg", []>;
+def CPRESTORE : MipsPseudo<(outs), (ins i32imm:$loc), ".cprestore\t$loc", []>;
+
+let usesCustomInserter = 1 in {
+ def ATOMIC_LOAD_ADD_I8 : Atomic2Ops<atomic_load_add_8, "load_add_8">;
+ def ATOMIC_LOAD_ADD_I16 : Atomic2Ops<atomic_load_add_16, "load_add_16">;
+ def ATOMIC_LOAD_ADD_I32 : Atomic2Ops<atomic_load_add_32, "load_add_32">;
+ def ATOMIC_LOAD_SUB_I8 : Atomic2Ops<atomic_load_sub_8, "load_sub_8">;
+ def ATOMIC_LOAD_SUB_I16 : Atomic2Ops<atomic_load_sub_16, "load_sub_16">;
+ def ATOMIC_LOAD_SUB_I32 : Atomic2Ops<atomic_load_sub_32, "load_sub_32">;
+ def ATOMIC_LOAD_AND_I8 : Atomic2Ops<atomic_load_and_8, "load_and_8">;
+ def ATOMIC_LOAD_AND_I16 : Atomic2Ops<atomic_load_and_16, "load_and_16">;
+ def ATOMIC_LOAD_AND_I32 : Atomic2Ops<atomic_load_and_32, "load_and_32">;
+ def ATOMIC_LOAD_OR_I8 : Atomic2Ops<atomic_load_or_8, "load_or_8">;
+ def ATOMIC_LOAD_OR_I16 : Atomic2Ops<atomic_load_or_16, "load_or_16">;
+ def ATOMIC_LOAD_OR_I32 : Atomic2Ops<atomic_load_or_32, "load_or_32">;
+ def ATOMIC_LOAD_XOR_I8 : Atomic2Ops<atomic_load_xor_8, "load_xor_8">;
+ def ATOMIC_LOAD_XOR_I16 : Atomic2Ops<atomic_load_xor_16, "load_xor_16">;
+ def ATOMIC_LOAD_XOR_I32 : Atomic2Ops<atomic_load_xor_32, "load_xor_32">;
+ def ATOMIC_LOAD_NAND_I8 : Atomic2Ops<atomic_load_nand_8, "load_nand_8">;
+ def ATOMIC_LOAD_NAND_I16 : Atomic2Ops<atomic_load_nand_16, "load_nand_16">;
+ def ATOMIC_LOAD_NAND_I32 : Atomic2Ops<atomic_load_nand_32, "load_nand_32">;
+
+ def ATOMIC_SWAP_I8 : Atomic2Ops<atomic_swap_8, "swap_8">;
+ def ATOMIC_SWAP_I16 : Atomic2Ops<atomic_swap_16, "swap_16">;
+ def ATOMIC_SWAP_I32 : Atomic2Ops<atomic_swap_32, "swap_32">;
+
+ def ATOMIC_CMP_SWAP_I8 : AtomicCmpSwap<atomic_cmp_swap_8, "8">;
+ def ATOMIC_CMP_SWAP_I16 : AtomicCmpSwap<atomic_cmp_swap_16, "16">;
+ def ATOMIC_CMP_SWAP_I32 : AtomicCmpSwap<atomic_cmp_swap_32, "32">;
+}
+
+// Unaligned loads and stores.
+// Replaces LW or SW during MCInstLowering if memory access is unaligned.
+def ULW :
+ MipsPseudo<(outs CPURegs:$dst), (ins mem:$addr), "ulw\t$dst, $addr", []>;
+def ULH :
+ MipsPseudo<(outs CPURegs:$dst), (ins mem:$addr), "ulh\t$dst, $addr", []>;
+def ULHu :
+ MipsPseudo<(outs CPURegs:$dst), (ins mem:$addr), "ulhu\t$dst, $addr", []>;
+def USW :
+ MipsPseudo<(outs), (ins CPURegs:$dst, mem:$addr), "usw\t$dst, $addr", []>;
+def USH :
+ MipsPseudo<(outs), (ins CPURegs:$dst, mem:$addr), "ush\t$dst, $addr", []>;
//===----------------------------------------------------------------------===//
// Instruction definition
// MipsI Instructions
//===----------------------------------------------------------------------===//
-// Arithmetic
+/// Arithmetic Instructions (ALU Immediate)
+def ADDiu : ArithI<0x09, "addiu", add, simm16, immSExt16>;
+def ADDi : ArithOverflowI<0x08, "addi", add, simm16, immSExt16>;
+def SLTi : SetCC_I<0x0a, "slti", setlt, simm16, immSExt16>;
+def SLTiu : SetCC_I<0x0b, "sltiu", setult, simm16, immSExt16>;
+def ANDi : LogicI<0x0c, "andi", and>;
+def ORi : LogicI<0x0d, "ori", or>;
+def XORi : LogicI<0x0e, "xori", xor>;
+def LUi : LoadUpper<0x0f, "lui">;
-// ADDiu just accept 16-bit immediates but we handle this on Pat's.
-// immZExt32 is used here so it can match GlobalAddress immediates.
-def ADDiu : ArithI<0x09, "addiu", add, uimm16, immZExt16>;
-def ADDi : ArithI<0x08, "addi", add, simm16, immSExt16>;
-def MUL : ArithR<0x1c, 0x02, "mul", mul, IIImul>;
-def ADDu : ArithR<0x00, 0x21, "addu", add, IIAlu>;
+/// Arithmetic Instructions (3-Operand, R-Type)
+def ADDu : ArithR<0x00, 0x21, "addu", add, IIAlu, 1>;
def SUBu : ArithR<0x00, 0x23, "subu", sub, IIAlu>;
-def ADD : ArithOverflowR<0x00, 0x20, "add">;
+def ADD : ArithOverflowR<0x00, 0x20, "add", 1>;
def SUB : ArithOverflowR<0x00, 0x22, "sub">;
-
-// Logical
+def SLT : SetCC_R<0x00, 0x2a, "slt", setlt>;
+def SLTu : SetCC_R<0x00, 0x2b, "sltu", setult>;
def AND : LogicR<0x24, "and", and>;
def OR : LogicR<0x25, "or", or>;
def XOR : LogicR<0x26, "xor", xor>;
-def ANDi : LogicI<0x0c, "andi", and>;
-def ORi : LogicI<0x0d, "ori", or>;
-def XORi : LogicI<0x0e, "xori", xor>;
def NOR : LogicNOR<0x00, 0x27, "nor">;
-// Shifts
-def SLL : LogicR_shift_imm<0x00, "sll", shl>;
-def SRL : LogicR_shift_imm<0x02, "srl", srl>;
-def SRA : LogicR_shift_imm<0x03, "sra", sra>;
-def SLLV : LogicR_shift_reg<0x04, "sllv", shl>;
-def SRLV : LogicR_shift_reg<0x06, "srlv", srl>;
-def SRAV : LogicR_shift_reg<0x07, "srav", sra>;
-
-// Load Upper Immediate
-def LUi : LoadUpper<0x0f, "lui">;
+/// Shift Instructions
+def SLL : LogicR_shift_rotate_imm<0x00, 0x00, "sll", shl>;
+def SRL : LogicR_shift_rotate_imm<0x02, 0x00, "srl", srl>;
+def SRA : LogicR_shift_rotate_imm<0x03, 0x00, "sra", sra>;
+def SLLV : LogicR_shift_rotate_reg<0x04, 0x00, "sllv", shl>;
+def SRLV : LogicR_shift_rotate_reg<0x06, 0x00, "srlv", srl>;
+def SRAV : LogicR_shift_rotate_reg<0x07, 0x00, "srav", sra>;
+
+// Rotate Instructions
+let Predicates = [IsMips32r2] in {
+ def ROTR : LogicR_shift_rotate_imm<0x02, 0x01, "rotr", rotr>;
+ def ROTRV : LogicR_shift_rotate_reg<0x06, 0x01, "rotrv", rotr>;
+}
-// Load/Store
+/// Load and Store Instructions
def LB : LoadM<0x20, "lb", sextloadi8>;
def LBu : LoadM<0x24, "lbu", zextloadi8>;
def LH : LoadM<0x21, "lh", sextloadi16>;
def SH : StoreM<0x29, "sh", truncstorei16>;
def SW : StoreM<0x2b, "sw", store>;
-// Conditional Branch
+let hasSideEffects = 1 in
+def SYNC : MipsInst<(outs), (ins i32imm:$stype), "sync $stype",
+ [(MipsSync imm:$stype)], NoItinerary>
+{
+ let opcode = 0;
+ let Inst{25-11} = 0;
+ let Inst{5-0} = 15;
+}
+
+/// Load-linked, Store-conditional
+let mayLoad = 1, hasDelaySlot = 1 in
+ def LL : FI<0x30, (outs CPURegs:$dst), (ins mem:$addr),
+ "ll\t$dst, $addr", [], IILoad>;
+let mayStore = 1, Constraints = "$src = $dst" in
+ def SC : FI<0x38, (outs CPURegs:$dst), (ins CPURegs:$src, mem:$addr),
+ "sc\t$src, $addr", [], IIStore>;
+
+/// Jump and Branch Instructions
+def J : JumpFJ<0x02, "j">;
+let isIndirectBranch = 1 in
+ def JR : JumpFR<0x00, 0x08, "jr">;
+def JAL : JumpLink<0x03, "jal">;
+def JALR : JumpLinkReg<0x00, 0x09, "jalr">;
def BEQ : CBranch<0x04, "beq", seteq>;
def BNE : CBranch<0x05, "bne", setne>;
let rt=1 in
-def BGEZ : CBranchZero<0x01, "bgez", setge>;
+ def BGEZ : CBranchZero<0x01, "bgez", setge>;
let rt=0 in {
-def BGTZ : CBranchZero<0x07, "bgtz", setgt>;
-def BLEZ : CBranchZero<0x07, "blez", setle>;
-def BLTZ : CBranchZero<0x01, "bltz", setlt>;
+ def BGTZ : CBranchZero<0x07, "bgtz", setgt>;
+ def BLEZ : CBranchZero<0x07, "blez", setle>;
+ def BLTZ : CBranchZero<0x01, "bltz", setlt>;
}
-// Set Condition Code
-def SLT : SetCC_R<0x00, 0x2a, "slt", setlt>;
-def SLTu : SetCC_R<0x00, 0x2b, "sltu", setult>;
-def SLTi : SetCC_I<0x0a, "slti", setlt, simm16, immSExt16>;
-def SLTiu : SetCC_I<0x0b, "sltiu", setult, uimm16, immZExt16>;
-
-// Unconditional jump
-def J : JumpFJ<0x02, "j">;
-def JR : JumpFR<0x00, 0x08, "jr">;
-
-// Jump and Link (Call)
-def JAL : JumpLink<0x03, "jal">;
-def JALR : JumpLinkReg<0x00, 0x09, "jalr">;
def BGEZAL : BranchLink<"bgezal">;
def BLTZAL : BranchLink<"bltzal">;
-// MulDiv and Move From Hi/Lo operations, have
-// their correpondent SDNodes created on ISelDAG.
-// Special Mul, Div operations
-def MULT : MulDiv<0x18, "mult", IIImul>;
-def MULTu : MulDiv<0x19, "multu", IIImul>;
-def DIV : MulDiv<0x1a, "div", IIIdiv>;
-def DIVu : MulDiv<0x1b, "divu", IIIdiv>;
-
-// Move From Hi/Lo
-def MFHI : MoveFromTo<0x10, "mfhi">;
-def MFLO : MoveFromTo<0x12, "mflo">;
-def MTHI : MoveFromTo<0x11, "mthi">;
-def MTLO : MoveFromTo<0x13, "mtlo">;
-
-// Count Leading
-// CLO/CLZ are part of the newer MIPS32(tm) instruction
-// set and not older Mips I keep this for future use
-// though.
-//def CLO : CountLeading<0x21, "clo">;
-//def CLZ : CountLeading<0x20, "clz">;
-
-// MADD*/MSUB* are not part of MipsI either.
-//def MADD : MArithR<0x00, "madd">;
-//def MADDU : MArithR<0x01, "maddu">;
-//def MSUB : MArithR<0x04, "msub">;
-//def MSUBU : MArithR<0x05, "msubu">;
-
-// No operation
-let addr=0 in
-def NOP : FJ<0, (outs), (ins), "nop", [], IIAlu>;
-
-// Ret instruction - as mips does not have "ret" a
-// jr $ra must be generated.
let isReturn=1, isTerminator=1, hasDelaySlot=1,
isBarrier=1, hasCtrlDep=1, rs=0, rt=0, shamt=0 in
-{
def RET : FR <0x00, 0x02, (outs), (ins CPURegs:$target),
- "jr $target", [(MipsRet CPURegs:$target)], IIBranch>;
+ "jr\t$target", [(MipsRet CPURegs:$target)], IIBranch>;
+
+/// Multiply and Divide Instructions.
+def MULT : Mul<0x18, "mult", IIImul>;
+def MULTu : Mul<0x19, "multu", IIImul>;
+def SDIV : Div<MipsDivRem, 0x1a, "div", IIIdiv>;
+def UDIV : Div<MipsDivRemU, 0x1b, "divu", IIIdiv>;
+
+let Defs = [HI] in
+ def MTHI : MoveToLOHI<0x11, "mthi">;
+let Defs = [LO] in
+ def MTLO : MoveToLOHI<0x13, "mtlo">;
+
+let Uses = [HI] in
+ def MFHI : MoveFromLOHI<0x10, "mfhi">;
+let Uses = [LO] in
+ def MFLO : MoveFromLOHI<0x12, "mflo">;
+
+/// Sign Ext In Register Instructions.
+let Predicates = [HasSEInReg] in {
+ let shamt = 0x10, rs = 0 in
+ def SEB : SignExtInReg<0x21, "seb", i8>;
+
+ let shamt = 0x18, rs = 0 in
+ def SEH : SignExtInReg<0x20, "seh", i16>;
}
+/// Count Leading
+def CLZ : CountLeading<0b100000, "clz",
+ [(set CPURegs:$dst, (ctlz CPURegs:$src))]>;
+def CLO : CountLeading<0b100001, "clo",
+ [(set CPURegs:$dst, (ctlz (not CPURegs:$src)))]>;
+
+/// Byte Swap
+let Predicates = [HasSwap] in {
+ let shamt = 0x3, rs = 0 in
+ def WSBW : ByteSwap<0x20, "wsbw">;
+}
+
+/// Conditional Move
+def MIPS_CMOV_ZERO : PatLeaf<(i32 0)>;
+def MIPS_CMOV_NZERO : PatLeaf<(i32 1)>;
+
+// Conditional moves:
+// These instructions are expanded in
+// MipsISelLowering::EmitInstrWithCustomInserter if target does not have
+// conditional move instructions.
+// flag:int, data:int
+let usesCustomInserter = 1, shamt = 0, Constraints = "$F = $dst" in
+ class CondMovIntInt<bits<6> funct, string instr_asm> :
+ FR<0, funct, (outs CPURegs:$dst),
+ (ins CPURegs:$T, CPURegs:$cond, CPURegs:$F),
+ !strconcat(instr_asm, "\t$dst, $T, $cond"), [], NoItinerary>;
+
+def MOVZ_I : CondMovIntInt<0x0a, "movz">;
+def MOVN_I : CondMovIntInt<0x0b, "movn">;
+
+/// No operation
+let addr=0 in
+ def NOP : FJ<0, (outs), (ins), "nop", [], IIAlu>;
+
// FrameIndexes are legalized when they are operands from load/store
// instructions. The same not happens for stack address copies, so an
// add op with mem ComplexPattern is used and the stack address copy
// can be matched. It's similar to Sparc LEA_ADDRi
-def LEA_ADDiu : EffectiveAddress<"addiu $dst, ${addr:stackloc}">;
+def LEA_ADDiu : EffectiveAddress<"addiu\t$dst, $addr">;
+
+// DynAlloc node points to dynamically allocated stack space.
+// $sp is added to the list of implicitly used registers to prevent dead code
+// elimination from removing instructions that modify $sp.
+let Uses = [SP] in
+def DynAlloc : EffectiveAddress<"addiu\t$dst, $addr">;
+
+// MADD*/MSUB*
+def MADD : MArithR<0, "madd", MipsMAdd, 1>;
+def MADDU : MArithR<1, "maddu", MipsMAddu, 1>;
+def MSUB : MArithR<4, "msub", MipsMSub>;
+def MSUBU : MArithR<5, "msubu", MipsMSubu>;
+
+// MUL is a assembly macro in the current used ISAs. In recent ISA's
+// it is a real instruction.
+def MUL : ArithR<0x1c, 0x02, "mul", mul, IIImul, 1>, Requires<[IsMips32]>;
+
+def RDHWR : ReadHardware;
+
+def EXT : ExtIns<0, "ext", (outs CPURegs:$rt),
+ (ins CPURegs:$rs, uimm16:$pos, uimm16:$sz),
+ [(set CPURegs:$rt,
+ (MipsExt CPURegs:$rs, immZExt5:$pos, immZExt5:$sz))],
+ NoItinerary>;
+
+let Constraints = "$src = $rt" in
+def INS : ExtIns<4, "ins", (outs CPURegs:$rt),
+ (ins CPURegs:$rs, uimm16:$pos, uimm16:$sz, CPURegs:$src),
+ [(set CPURegs:$rt,
+ (MipsIns CPURegs:$rs, immZExt5:$pos, immZExt5:$sz,
+ CPURegs:$src))],
+ NoItinerary>;
//===----------------------------------------------------------------------===//
// Arbitrary patterns that map to one or more instructions
def : Pat<(i32 imm:$imm),
(ORi (LUi (HI16 imm:$imm)), (LO16 imm:$imm))>;
+// Carry patterns
+def : Pat<(subc CPURegs:$lhs, CPURegs:$rhs),
+ (SUBu CPURegs:$lhs, CPURegs:$rhs)>;
+def : Pat<(addc CPURegs:$lhs, CPURegs:$rhs),
+ (ADDu CPURegs:$lhs, CPURegs:$rhs)>;
+def : Pat<(addc CPURegs:$src, immSExt16:$imm),
+ (ADDiu CPURegs:$src, imm:$imm)>;
+
// Call
def : Pat<(MipsJmpLink (i32 tglobaladdr:$dst)),
(JAL tglobaladdr:$dst)>;
def : Pat<(MipsJmpLink (i32 texternalsym:$dst)),
(JAL texternalsym:$dst)>;
-def : Pat<(MipsJmpLink CPURegs:$dst),
- (JALR CPURegs:$dst)>;
+//def : Pat<(MipsJmpLink CPURegs:$dst),
+// (JALR CPURegs:$dst)>;
-// GlobalAddress, Constant Pool, ExternalSymbol, and JumpTable
+// hi/lo relocs
def : Pat<(MipsHi tglobaladdr:$in), (LUi tglobaladdr:$in)>;
-def : Pat<(MipsLo tglobaladdr:$in), (ADDiu ZERO, tglobaladdr:$in)>;
+def : Pat<(MipsHi tblockaddress:$in), (LUi tblockaddress:$in)>;
def : Pat<(add CPURegs:$hi, (MipsLo tglobaladdr:$lo)),
(ADDiu CPURegs:$hi, tglobaladdr:$lo)>;
+def : Pat<(add CPURegs:$hi, (MipsLo tblockaddress:$lo)),
+ (ADDiu CPURegs:$hi, tblockaddress:$lo)>;
+
def : Pat<(MipsHi tjumptable:$in), (LUi tjumptable:$in)>;
-def : Pat<(MipsLo tjumptable:$in), (ADDiu ZERO, tjumptable:$in)>;
def : Pat<(add CPURegs:$hi, (MipsLo tjumptable:$lo)),
(ADDiu CPURegs:$hi, tjumptable:$lo)>;
-// Mips does not have not, so we increase the operation
+def : Pat<(MipsHi tconstpool:$in), (LUi tconstpool:$in)>;
+def : Pat<(add CPURegs:$hi, (MipsLo tconstpool:$lo)),
+ (ADDiu CPURegs:$hi, tconstpool:$lo)>;
+
+// gp_rel relocs
+def : Pat<(add CPURegs:$gp, (MipsGPRel tglobaladdr:$in)),
+ (ADDiu CPURegs:$gp, tglobaladdr:$in)>;
+def : Pat<(add CPURegs:$gp, (MipsGPRel tconstpool:$in)),
+ (ADDiu CPURegs:$gp, tconstpool:$in)>;
+
+// tlsgd
+def : Pat<(add CPURegs:$gp, (MipsTlsGd tglobaltlsaddr:$in)),
+ (ADDiu CPURegs:$gp, tglobaltlsaddr:$in)>;
+
+// tprel hi/lo
+def : Pat<(MipsTprelHi tglobaltlsaddr:$in), (LUi tglobaltlsaddr:$in)>;
+def : Pat<(add CPURegs:$hi, (MipsTprelLo tglobaltlsaddr:$lo)),
+ (ADDiu CPURegs:$hi, tglobaltlsaddr:$lo)>;
+
+// wrapper_pic
+class WrapperPICPat<SDNode node>:
+ Pat<(MipsWrapperPIC node:$in),
+ (ADDiu GP, node:$in)>;
+
+def : WrapperPICPat<tglobaladdr>;
+def : WrapperPICPat<tconstpool>;
+def : WrapperPICPat<texternalsym>;
+def : WrapperPICPat<tblockaddress>;
+def : WrapperPICPat<tjumptable>;
+
+// Mips does not have "not", so we expand our way
def : Pat<(not CPURegs:$in),
(NOR CPURegs:$in, ZERO)>;
// extended load and stores
-def : Pat<(i32 (extloadi1 addr:$src)), (LBu addr:$src)>;
-def : Pat<(i32 (extloadi8 addr:$src)), (LBu addr:$src)>;
-def : Pat<(i32 (extloadi16 addr:$src)), (LHu addr:$src)>;
-def : Pat<(truncstorei1 CPURegs:$src, addr:$addr),
- (SB CPURegs:$src, addr:$addr)>;
+def : Pat<(extloadi1 addr:$src), (LBu addr:$src)>;
+def : Pat<(extloadi8 addr:$src), (LBu addr:$src)>;
+def : Pat<(extloadi16 addr:$src), (LHu addr:$src)>;
-// some peepholes
+// peepholes
def : Pat<(store (i32 0), addr:$dst), (SW ZERO, addr:$dst)>;
-///
-/// brcond patterns
-///
-
-// direct match equal/notequal zero branches
+// brcond patterns
def : Pat<(brcond (setne CPURegs:$lhs, 0), bb:$dst),
(BNE CPURegs:$lhs, ZERO, bb:$dst)>;
def : Pat<(brcond (seteq CPURegs:$lhs, 0), bb:$dst),
(BEQ CPURegs:$lhs, ZERO, bb:$dst)>;
def : Pat<(brcond (setge CPURegs:$lhs, CPURegs:$rhs), bb:$dst),
- (BGEZ (SUB CPURegs:$lhs, CPURegs:$rhs), bb:$dst)>;
+ (BEQ (SLT CPURegs:$lhs, CPURegs:$rhs), ZERO, bb:$dst)>;
def : Pat<(brcond (setuge CPURegs:$lhs, CPURegs:$rhs), bb:$dst),
- (BGEZ (SUBu CPURegs:$lhs, CPURegs:$rhs), bb:$dst)>;
-
-def : Pat<(brcond (setgt CPURegs:$lhs, CPURegs:$rhs), bb:$dst),
- (BGTZ (SUB CPURegs:$lhs, CPURegs:$rhs), bb:$dst)>;
-def : Pat<(brcond (setugt CPURegs:$lhs, CPURegs:$rhs), bb:$dst),
- (BGTZ (SUBu CPURegs:$lhs, CPURegs:$rhs), bb:$dst)>;
+ (BEQ (SLTu CPURegs:$lhs, CPURegs:$rhs), ZERO, bb:$dst)>;
+def : Pat<(brcond (setge CPURegs:$lhs, immSExt16:$rhs), bb:$dst),
+ (BEQ (SLTi CPURegs:$lhs, immSExt16:$rhs), ZERO, bb:$dst)>;
+def : Pat<(brcond (setuge CPURegs:$lhs, immSExt16:$rhs), bb:$dst),
+ (BEQ (SLTiu CPURegs:$lhs, immSExt16:$rhs), ZERO, bb:$dst)>;
def : Pat<(brcond (setle CPURegs:$lhs, CPURegs:$rhs), bb:$dst),
- (BLEZ (SUB CPURegs:$lhs, CPURegs:$rhs), bb:$dst)>;
+ (BEQ (SLT CPURegs:$rhs, CPURegs:$lhs), ZERO, bb:$dst)>;
def : Pat<(brcond (setule CPURegs:$lhs, CPURegs:$rhs), bb:$dst),
- (BLEZ (SUBu CPURegs:$lhs, CPURegs:$rhs), bb:$dst)>;
-
-def : Pat<(brcond (setlt CPURegs:$lhs, immSExt16:$rhs), bb:$dst),
- (BNE (SLTi CPURegs:$lhs, immSExt16:$rhs), ZERO, bb:$dst)>;
-def : Pat<(brcond (setult CPURegs:$lhs, immZExt16:$rhs), bb:$dst),
- (BNE (SLTiu CPURegs:$lhs, immZExt16:$rhs), ZERO, bb:$dst)>;
-def : Pat<(brcond (setlt CPURegs:$lhs, CPURegs:$rhs), bb:$dst),
- (BNE (SLT CPURegs:$lhs, CPURegs:$rhs), ZERO, bb:$dst)>;
-def : Pat<(brcond (setult CPURegs:$lhs, CPURegs:$rhs), bb:$dst),
- (BNE (SLTu CPURegs:$lhs, CPURegs:$rhs), ZERO, bb:$dst)>;
-
-def : Pat<(brcond (setlt CPURegs:$lhs, CPURegs:$rhs), bb:$dst),
- (BLTZ (SUB CPURegs:$lhs, CPURegs:$rhs), bb:$dst)>;
-def : Pat<(brcond (setult CPURegs:$lhs, CPURegs:$rhs), bb:$dst),
- (BLTZ (SUBu CPURegs:$lhs, CPURegs:$rhs), bb:$dst)>;
-
-// generic brcond pattern
+ (BEQ (SLTu CPURegs:$rhs, CPURegs:$lhs), ZERO, bb:$dst)>;
+
def : Pat<(brcond CPURegs:$cond, bb:$dst),
(BNE CPURegs:$cond, ZERO, bb:$dst)>;
-///
-/// setcc patterns, only matched when there
-/// is no brcond following a setcc operation
-///
+// select patterns
+multiclass MovzPats<RegisterClass RC, Instruction MOVZInst> {
+ def : Pat<(select (setge CPURegs:$lhs, CPURegs:$rhs), RC:$T, RC:$F),
+ (MOVZInst RC:$T, (SLT CPURegs:$lhs, CPURegs:$rhs), RC:$F)>;
+ def : Pat<(select (setuge CPURegs:$lhs, CPURegs:$rhs), RC:$T, RC:$F),
+ (MOVZInst RC:$T, (SLTu CPURegs:$lhs, CPURegs:$rhs), RC:$F)>;
+ def : Pat<(select (setge CPURegs:$lhs, immSExt16:$rhs), RC:$T, RC:$F),
+ (MOVZInst RC:$T, (SLTi CPURegs:$lhs, immSExt16:$rhs), RC:$F)>;
+ def : Pat<(select (setuge CPURegs:$lh, immSExt16:$rh), RC:$T, RC:$F),
+ (MOVZInst RC:$T, (SLTiu CPURegs:$lh, immSExt16:$rh), RC:$F)>;
+ def : Pat<(select (setle CPURegs:$lhs, CPURegs:$rhs), RC:$T, RC:$F),
+ (MOVZInst RC:$T, (SLT CPURegs:$rhs, CPURegs:$lhs), RC:$F)>;
+ def : Pat<(select (setule CPURegs:$lhs, CPURegs:$rhs), RC:$T, RC:$F),
+ (MOVZInst RC:$T, (SLTu CPURegs:$rhs, CPURegs:$lhs), RC:$F)>;
+ def : Pat<(select (seteq CPURegs:$lhs, CPURegs:$rhs), RC:$T, RC:$F),
+ (MOVZInst RC:$T, (XOR CPURegs:$lhs, CPURegs:$rhs), RC:$F)>;
+ def : Pat<(select (seteq CPURegs:$lhs, 0), RC:$T, RC:$F),
+ (MOVZInst RC:$T, CPURegs:$lhs, RC:$F)>;
+}
+
+multiclass MovnPats<RegisterClass RC, Instruction MOVNInst> {
+ def : Pat<(select (setne CPURegs:$lhs, CPURegs:$rhs), RC:$T, RC:$F),
+ (MOVNInst RC:$T, (XOR CPURegs:$lhs, CPURegs:$rhs), RC:$F)>;
+ def : Pat<(select CPURegs:$cond, RC:$T, RC:$F),
+ (MOVNInst RC:$T, CPURegs:$cond, RC:$F)>;
+ def : Pat<(select (setne CPURegs:$lhs, 0), RC:$T, RC:$F),
+ (MOVNInst RC:$T, CPURegs:$lhs, RC:$F)>;
+}
+
+defm : MovzPats<CPURegs, MOVZ_I>;
+defm : MovnPats<CPURegs, MOVN_I>;
+
+// setcc patterns
+def : Pat<(seteq CPURegs:$lhs, CPURegs:$rhs),
+ (SLTu (XOR CPURegs:$lhs, CPURegs:$rhs), 1)>;
+def : Pat<(setne CPURegs:$lhs, CPURegs:$rhs),
+ (SLTu ZERO, (XOR CPURegs:$lhs, CPURegs:$rhs))>;
-// setcc 2 register operands
def : Pat<(setle CPURegs:$lhs, CPURegs:$rhs),
(XORi (SLT CPURegs:$rhs, CPURegs:$lhs), 1)>;
def : Pat<(setule CPURegs:$lhs, CPURegs:$rhs),
def : Pat<(setuge CPURegs:$lhs, CPURegs:$rhs),
(XORi (SLTu CPURegs:$lhs, CPURegs:$rhs), 1)>;
-def : Pat<(setne CPURegs:$lhs, CPURegs:$rhs),
- (OR (SLT CPURegs:$lhs, CPURegs:$rhs),
- (SLT CPURegs:$rhs, CPURegs:$lhs))>;
-
-def : Pat<(seteq CPURegs:$lhs, CPURegs:$rhs),
- (XORi (OR (SLT CPURegs:$lhs, CPURegs:$rhs),
- (SLT CPURegs:$rhs, CPURegs:$lhs)), 1)>;
-
-// setcc reg/imm operands
def : Pat<(setge CPURegs:$lhs, immSExt16:$rhs),
(XORi (SLTi CPURegs:$lhs, immSExt16:$rhs), 1)>;
-def : Pat<(setuge CPURegs:$lhs, immZExt16:$rhs),
- (XORi (SLTiu CPURegs:$lhs, immZExt16:$rhs), 1)>;
+def : Pat<(setuge CPURegs:$lhs, immSExt16:$rhs),
+ (XORi (SLTiu CPURegs:$lhs, immSExt16:$rhs), 1)>;
+
+// select MipsDynAlloc
+def : Pat<(MipsDynAlloc addr:$f), (DynAlloc addr:$f)>;
+
+//===----------------------------------------------------------------------===//
+// Floating Point Support
+//===----------------------------------------------------------------------===//
+
+include "MipsInstrFPU.td"
+