MIB.addReg(Mips::DSPEFI, Flag);
}
+unsigned MipsSEDAGToDAGISel::getMSACtrlReg(const SDValue RegIdx) const {
+ switch (cast<ConstantSDNode>(RegIdx)->getZExtValue()) {
+ default:
+ llvm_unreachable("Could not map int to register");
+ case 0: return Mips::MSAIR;
+ case 1: return Mips::MSACSR;
+ case 2: return Mips::MSAAccess;
+ case 3: return Mips::MSASave;
+ case 4: return Mips::MSAModify;
+ case 5: return Mips::MSARequest;
+ case 6: return Mips::MSAMap;
+ case 7: return Mips::MSAUnmap;
+ }
+}
+
bool MipsSEDAGToDAGISel::replaceUsesWithZeroReg(MachineRegisterInfo *MRI,
const MachineInstr& MI) {
unsigned DstReg = 0, ZeroReg = 0;
return false;
}
+/// ComplexPattern used on MipsInstrInfo
+/// Used on Mips Load/Store instructions
+bool MipsSEDAGToDAGISel::selectAddrRegReg(SDValue Addr, SDValue &Base,
+ SDValue &Offset) const {
+ // Operand is a result from an ADD.
+ if (Addr.getOpcode() == ISD::ADD) {
+ Base = Addr.getOperand(0);
+ Offset = Addr.getOperand(1);
+ return true;
+ }
+
+ return false;
+}
+
bool MipsSEDAGToDAGISel::selectAddrDefault(SDValue Addr, SDValue &Base,
SDValue &Offset) const {
Base = Addr;
selectAddrDefault(Addr, Base, Offset);
}
+/// Used on microMIPS Load/Store unaligned instructions (12-bit offset)
+bool MipsSEDAGToDAGISel::selectAddrRegImm12(SDValue Addr, SDValue &Base,
+ SDValue &Offset) const {
+ EVT ValTy = Addr.getValueType();
+
+ // Addresses of the form FI+const or FI|const
+ if (CurDAG->isBaseWithConstantOffset(Addr)) {
+ ConstantSDNode *CN = dyn_cast<ConstantSDNode>(Addr.getOperand(1));
+ if (isInt<12>(CN->getSExtValue())) {
+
+ // If the first operand is a FI then get the TargetFI Node
+ if (FrameIndexSDNode *FIN = dyn_cast<FrameIndexSDNode>
+ (Addr.getOperand(0)))
+ Base = CurDAG->getTargetFrameIndex(FIN->getIndex(), ValTy);
+ else
+ Base = Addr.getOperand(0);
+
+ Offset = CurDAG->getTargetConstant(CN->getZExtValue(), ValTy);
+ return true;
+ }
+ }
+
+ return false;
+}
+
+bool MipsSEDAGToDAGISel::selectIntAddrMM(SDValue Addr, SDValue &Base,
+ SDValue &Offset) const {
+ return selectAddrRegImm12(Addr, Base, Offset) ||
+ selectAddrDefault(Addr, Base, Offset);
+}
+
+// Select constant vector splats.
+//
+// Returns true and sets Imm if:
+// * MSA is enabled
+// * N is a ISD::BUILD_VECTOR representing a constant splat
+bool MipsSEDAGToDAGISel::selectVSplat(SDNode *N, APInt &Imm) const {
+ if (!Subtarget.hasMSA())
+ return false;
+
+ BuildVectorSDNode *Node = dyn_cast<BuildVectorSDNode>(N);
+
+ if (Node == NULL)
+ return false;
+
+ APInt SplatValue, SplatUndef;
+ unsigned SplatBitSize;
+ bool HasAnyUndefs;
+
+ if (!Node->isConstantSplat(SplatValue, SplatUndef, SplatBitSize,
+ HasAnyUndefs, 8,
+ !Subtarget.isLittle()))
+ return false;
+
+ Imm = SplatValue;
+
+ return true;
+}
+
+// Select constant vector splats.
+//
+// In addition to the requirements of selectVSplat(), this function returns
+// true and sets Imm if:
+// * The splat value is the same width as the elements of the vector
+// * The splat value fits in an integer with the specified signed-ness and
+// width.
+//
+// This function looks through ISD::BITCAST nodes.
+// TODO: This might not be appropriate for big-endian MSA since BITCAST is
+// sometimes a shuffle in big-endian mode.
+//
+// It's worth noting that this function is not used as part of the selection
+// of ldi.[bhwd] since it does not permit using the wrong-typed ldi.[bhwd]
+// instruction to achieve the desired bit pattern. ldi.[bhwd] is selected in
+// MipsSEDAGToDAGISel::selectNode.
+bool MipsSEDAGToDAGISel::
+selectVSplatCommon(SDValue N, SDValue &Imm, bool Signed,
+ unsigned ImmBitSize) const {
+ APInt ImmValue;
+ EVT EltTy = N->getValueType(0).getVectorElementType();
+
+ if (N->getOpcode() == ISD::BITCAST)
+ N = N->getOperand(0);
+
+ if (selectVSplat (N.getNode(), ImmValue) &&
+ ImmValue.getBitWidth() == EltTy.getSizeInBits()) {
+ if (( Signed && ImmValue.isSignedIntN(ImmBitSize)) ||
+ (!Signed && ImmValue.isIntN(ImmBitSize))) {
+ Imm = CurDAG->getTargetConstant(ImmValue, EltTy);
+ return true;
+ }
+ }
+
+ return false;
+}
+
+// Select constant vector splats.
+bool MipsSEDAGToDAGISel::
+selectVSplatUimm1(SDValue N, SDValue &Imm) const {
+ return selectVSplatCommon(N, Imm, false, 1);
+}
+
+bool MipsSEDAGToDAGISel::
+selectVSplatUimm2(SDValue N, SDValue &Imm) const {
+ return selectVSplatCommon(N, Imm, false, 2);
+}
+
+bool MipsSEDAGToDAGISel::
+selectVSplatUimm3(SDValue N, SDValue &Imm) const {
+ return selectVSplatCommon(N, Imm, false, 3);
+}
+
+// Select constant vector splats.
+bool MipsSEDAGToDAGISel::
+selectVSplatUimm4(SDValue N, SDValue &Imm) const {
+ return selectVSplatCommon(N, Imm, false, 4);
+}
+
+// Select constant vector splats.
+bool MipsSEDAGToDAGISel::
+selectVSplatUimm5(SDValue N, SDValue &Imm) const {
+ return selectVSplatCommon(N, Imm, false, 5);
+}
+
+// Select constant vector splats.
+bool MipsSEDAGToDAGISel::
+selectVSplatUimm6(SDValue N, SDValue &Imm) const {
+ return selectVSplatCommon(N, Imm, false, 6);
+}
+
+// Select constant vector splats.
+bool MipsSEDAGToDAGISel::
+selectVSplatUimm8(SDValue N, SDValue &Imm) const {
+ return selectVSplatCommon(N, Imm, false, 8);
+}
+
+// Select constant vector splats.
+bool MipsSEDAGToDAGISel::
+selectVSplatSimm5(SDValue N, SDValue &Imm) const {
+ return selectVSplatCommon(N, Imm, true, 5);
+}
+
+// Select constant vector splats whose value is a power of 2.
+//
+// In addition to the requirements of selectVSplat(), this function returns
+// true and sets Imm if:
+// * The splat value is the same width as the elements of the vector
+// * The splat value is a power of two.
+//
+// This function looks through ISD::BITCAST nodes.
+// TODO: This might not be appropriate for big-endian MSA since BITCAST is
+// sometimes a shuffle in big-endian mode.
+bool MipsSEDAGToDAGISel::selectVSplatUimmPow2(SDValue N, SDValue &Imm) const {
+ APInt ImmValue;
+ EVT EltTy = N->getValueType(0).getVectorElementType();
+
+ if (N->getOpcode() == ISD::BITCAST)
+ N = N->getOperand(0);
+
+ if (selectVSplat (N.getNode(), ImmValue) &&
+ ImmValue.getBitWidth() == EltTy.getSizeInBits()) {
+ int32_t Log2 = ImmValue.exactLogBase2();
+
+ if (Log2 != -1) {
+ Imm = CurDAG->getTargetConstant(Log2, EltTy);
+ return true;
+ }
+ }
+
+ return false;
+}
+
+// Select constant vector splats whose value only has a consecutive sequence
+// of left-most bits set (e.g. 0b11...1100...00).
+//
+// In addition to the requirements of selectVSplat(), this function returns
+// true and sets Imm if:
+// * The splat value is the same width as the elements of the vector
+// * The splat value is a consecutive sequence of left-most bits.
+//
+// This function looks through ISD::BITCAST nodes.
+// TODO: This might not be appropriate for big-endian MSA since BITCAST is
+// sometimes a shuffle in big-endian mode.
+bool MipsSEDAGToDAGISel::selectVSplatMaskL(SDValue N, SDValue &Imm) const {
+ APInt ImmValue;
+ EVT EltTy = N->getValueType(0).getVectorElementType();
+
+ if (N->getOpcode() == ISD::BITCAST)
+ N = N->getOperand(0);
+
+ if (selectVSplat(N.getNode(), ImmValue) &&
+ ImmValue.getBitWidth() == EltTy.getSizeInBits()) {
+ // Extract the run of set bits starting with bit zero from the bitwise
+ // inverse of ImmValue, and test that the inverse of this is the same
+ // as the original value.
+ if (ImmValue == ~(~ImmValue & ~(~ImmValue + 1))) {
+
+ Imm = CurDAG->getTargetConstant(ImmValue.countPopulation(), EltTy);
+ return true;
+ }
+ }
+
+ return false;
+}
+
+// Select constant vector splats whose value only has a consecutive sequence
+// of right-most bits set (e.g. 0b00...0011...11).
+//
+// In addition to the requirements of selectVSplat(), this function returns
+// true and sets Imm if:
+// * The splat value is the same width as the elements of the vector
+// * The splat value is a consecutive sequence of right-most bits.
+//
+// This function looks through ISD::BITCAST nodes.
+// TODO: This might not be appropriate for big-endian MSA since BITCAST is
+// sometimes a shuffle in big-endian mode.
+bool MipsSEDAGToDAGISel::selectVSplatMaskR(SDValue N, SDValue &Imm) const {
+ APInt ImmValue;
+ EVT EltTy = N->getValueType(0).getVectorElementType();
+
+ if (N->getOpcode() == ISD::BITCAST)
+ N = N->getOperand(0);
+
+ if (selectVSplat(N.getNode(), ImmValue) &&
+ ImmValue.getBitWidth() == EltTy.getSizeInBits()) {
+ // Extract the run of set bits starting with bit zero, and test that the
+ // result is the same as the original value
+ if (ImmValue == (ImmValue & ~(ImmValue + 1))) {
+ Imm = CurDAG->getTargetConstant(ImmValue.countPopulation(), EltTy);
+ return true;
+ }
+ }
+
+ return false;
+}
+
+bool MipsSEDAGToDAGISel::selectVSplatUimmInvPow2(SDValue N,
+ SDValue &Imm) const {
+ APInt ImmValue;
+ EVT EltTy = N->getValueType(0).getVectorElementType();
+
+ if (N->getOpcode() == ISD::BITCAST)
+ N = N->getOperand(0);
+
+ if (selectVSplat(N.getNode(), ImmValue) &&
+ ImmValue.getBitWidth() == EltTy.getSizeInBits()) {
+ int32_t Log2 = (~ImmValue).exactLogBase2();
+
+ if (Log2 != -1) {
+ Imm = CurDAG->getTargetConstant(Log2, EltTy);
+ return true;
+ }
+ }
+
+ return false;
+}
+
std::pair<bool, SDNode*> MipsSEDAGToDAGISel::selectNode(SDNode *Node) {
unsigned Opcode = Node->getOpcode();
SDLoc DL(Node);
return std::make_pair(true, RegOpnd);
}
+ case ISD::INTRINSIC_W_CHAIN: {
+ switch (cast<ConstantSDNode>(Node->getOperand(1))->getZExtValue()) {
+ default:
+ break;
+
+ case Intrinsic::mips_cfcmsa: {
+ SDValue ChainIn = Node->getOperand(0);
+ SDValue RegIdx = Node->getOperand(2);
+ SDValue Reg = CurDAG->getCopyFromReg(ChainIn, DL,
+ getMSACtrlReg(RegIdx), MVT::i32);
+ return std::make_pair(true, Reg.getNode());
+ }
+ }
+ break;
+ }
+
+ case ISD::INTRINSIC_WO_CHAIN: {
+ switch (cast<ConstantSDNode>(Node->getOperand(0))->getZExtValue()) {
+ default:
+ break;
+
+ case Intrinsic::mips_move_v:
+ // Like an assignment but will always produce a move.v even if
+ // unnecessary.
+ return std::make_pair(true,
+ CurDAG->getMachineNode(Mips::MOVE_V, DL,
+ Node->getValueType(0),
+ Node->getOperand(1)));
+ }
+ break;
+ }
+
+ case ISD::INTRINSIC_VOID: {
+ switch (cast<ConstantSDNode>(Node->getOperand(1))->getZExtValue()) {
+ default:
+ break;
+
+ case Intrinsic::mips_ctcmsa: {
+ SDValue ChainIn = Node->getOperand(0);
+ SDValue RegIdx = Node->getOperand(2);
+ SDValue Value = Node->getOperand(3);
+ SDValue ChainOut = CurDAG->getCopyToReg(ChainIn, DL,
+ getMSACtrlReg(RegIdx), Value);
+ return std::make_pair(true, ChainOut.getNode());
+ }
+ }
+ break;
+ }
+
case MipsISD::ThreadPointer: {
EVT PtrVT = getTargetLowering()->getPointerTy();
unsigned RdhwrOpc, DestReg;
return std::make_pair(true, ResNode.getNode());
}
- case MipsISD::InsertLOHI: {
- unsigned RCID = Subtarget.hasDSP() ? Mips::ACC64DSPRegClassID :
- Mips::ACC64RegClassID;
- SDValue RegClass = CurDAG->getTargetConstant(RCID, MVT::i32);
- SDValue LoIdx = CurDAG->getTargetConstant(Mips::sub_lo, MVT::i32);
- SDValue HiIdx = CurDAG->getTargetConstant(Mips::sub_hi, MVT::i32);
- const SDValue Ops[] = { RegClass, Node->getOperand(0), LoIdx,
- Node->getOperand(1), HiIdx };
- SDNode *Res = CurDAG->getMachineNode(TargetOpcode::REG_SEQUENCE, DL,
- MVT::Untyped, Ops);
+ case ISD::BUILD_VECTOR: {
+ // Select appropriate ldi.[bhwd] instructions for constant splats of
+ // 128-bit when MSA is enabled. Fixup any register class mismatches that
+ // occur as a result.
+ //
+ // This allows the compiler to use a wider range of immediates than would
+ // otherwise be allowed. If, for example, v4i32 could only use ldi.h then
+ // it would not be possible to load { 0x01010101, 0x01010101, 0x01010101,
+ // 0x01010101 } without using a constant pool. This would be sub-optimal
+ // when // 'ldi.b wd, 1' is capable of producing that bit-pattern in the
+ // same set/ of registers. Similarly, ldi.h isn't capable of producing {
+ // 0x00000000, 0x00000001, 0x00000000, 0x00000001 } but 'ldi.d wd, 1' can.
+
+ BuildVectorSDNode *BVN = cast<BuildVectorSDNode>(Node);
+ APInt SplatValue, SplatUndef;
+ unsigned SplatBitSize;
+ bool HasAnyUndefs;
+ unsigned LdiOp;
+ EVT ResVecTy = BVN->getValueType(0);
+ EVT ViaVecTy;
+
+ if (!Subtarget.hasMSA() || !BVN->getValueType(0).is128BitVector())
+ return std::make_pair(false, (SDNode*)NULL);
+
+ if (!BVN->isConstantSplat(SplatValue, SplatUndef, SplatBitSize,
+ HasAnyUndefs, 8,
+ !Subtarget.isLittle()))
+ return std::make_pair(false, (SDNode*)NULL);
+
+ switch (SplatBitSize) {
+ default:
+ return std::make_pair(false, (SDNode*)NULL);
+ case 8:
+ LdiOp = Mips::LDI_B;
+ ViaVecTy = MVT::v16i8;
+ break;
+ case 16:
+ LdiOp = Mips::LDI_H;
+ ViaVecTy = MVT::v8i16;
+ break;
+ case 32:
+ LdiOp = Mips::LDI_W;
+ ViaVecTy = MVT::v4i32;
+ break;
+ case 64:
+ LdiOp = Mips::LDI_D;
+ ViaVecTy = MVT::v2i64;
+ break;
+ }
+
+ if (!SplatValue.isSignedIntN(10))
+ return std::make_pair(false, (SDNode*)NULL);
+
+ SDValue Imm = CurDAG->getTargetConstant(SplatValue,
+ ViaVecTy.getVectorElementType());
+
+ SDNode *Res = CurDAG->getMachineNode(LdiOp, SDLoc(Node), ViaVecTy, Imm);
+
+ if (ResVecTy != ViaVecTy) {
+ // If LdiOp is writing to a different register class to ResVecTy, then
+ // fix it up here. This COPY_TO_REGCLASS should never cause a move.v
+ // since the source and destination register sets contain the same
+ // registers.
+ const TargetLowering *TLI = getTargetLowering();
+ MVT ResVecTySimple = ResVecTy.getSimpleVT();
+ const TargetRegisterClass *RC = TLI->getRegClassFor(ResVecTySimple);
+ Res = CurDAG->getMachineNode(Mips::COPY_TO_REGCLASS, SDLoc(Node),
+ ResVecTy, SDValue(Res, 0),
+ CurDAG->getTargetConstant(RC->getID(),
+ MVT::i32));
+ }
+
return std::make_pair(true, Res);
}
+
}
return std::make_pair(false, (SDNode*)NULL);
projects / oota-llvm.git / blobdiff