def SDT_PIC16Store : SDTypeProfile<0, 4, [SDTCisI8<0>, SDTCisI8<1>,
SDTCisI8<2>, SDTCisI8<3>]>;
+def SDT_PIC16Connect : SDTypeProfile<1, 2, [SDTCisI8<0>, SDTCisI8<1>,
+ SDTCisI8<2>]>;
+
// PIC16ISD::CALL type prorile
def SDT_PIC16call : SDTypeProfile<0, -1, [SDTCisInt<0>]>;
+def SDT_PIC16callw : SDTypeProfile<1, -1, [SDTCisInt<0>]>;
// PIC16ISD::BRCOND
def SDT_PIC16Brcond: SDTypeProfile<0, 2,
[SDNPHasChain, SDNPOptInFlag, SDNPOutFlag]>;
// Low 8-bits of GlobalAddress.
-def PIC16Lo : SDNode<"PIC16ISD::Lo", SDTI8UnaryOp>;
+def PIC16Lo : SDNode<"PIC16ISD::Lo", SDTI8BinOp>;
// High 8-bits of GlobalAddress.
-def PIC16Hi : SDNode<"PIC16ISD::Hi", SDTI8UnaryOp>;
+def PIC16Hi : SDNode<"PIC16ISD::Hi", SDTI8BinOp>;
// The MTHI and MTLO nodes are used only to match them in the incoming
// DAG for replacement by corresponding set_fsrhi, set_fsrlo insntructions.
// These nodes are not used for defining any instructions.
-def MTLO : SDNode<"PIC16ISD::MTLO", SDTI8UnaryOp>;
-def MTHI : SDNode<"PIC16ISD::MTHI", SDTI8UnaryOp>;
+def MTLO : SDNode<"PIC16ISD::MTLO", SDTI8UnaryOp>;
+def MTHI : SDNode<"PIC16ISD::MTHI", SDTI8UnaryOp>;
+def MTPCLATH : SDNode<"PIC16ISD::MTPCLATH", SDTI8UnaryOp>;
// Node to generate Bank Select for a GlobalAddress.
def Banksel : SDNode<"PIC16ISD::Banksel", SDTI8UnaryOp>;
[SDNPHasChain, SDNPInFlag, SDNPOutFlag]>;
// Node to match a direct load operation.
-def PIC16Load : SDNode<"PIC16ISD::PIC16Load", SDT_PIC16Load, [SDNPHasChain]>;
-def PIC16LdWF : SDNode<"PIC16ISD::PIC16LdWF", SDT_PIC16Load,
+def PIC16Load : SDNode<"PIC16ISD::PIC16Load", SDT_PIC16Load, [SDNPHasChain]>;
+def PIC16LdArg : SDNode<"PIC16ISD::PIC16LdArg", SDT_PIC16Load, [SDNPHasChain]>;
+def PIC16LdWF : SDNode<"PIC16ISD::PIC16LdWF", SDT_PIC16Load,
[SDNPHasChain, SDNPInFlag, SDNPOutFlag]>;
+def PIC16Connect: SDNode<"PIC16ISD::PIC16Connect", SDT_PIC16Connect, []>;
// Node to match PIC16 call
def PIC16call : SDNode<"PIC16ISD::CALL", SDT_PIC16call,
[SDNPHasChain , SDNPOptInFlag, SDNPOutFlag]>;
+def PIC16callw : SDNode<"PIC16ISD::CALLW", SDT_PIC16callw,
+ [SDNPHasChain , SDNPOptInFlag, SDNPOutFlag]>;
// Node to match a comparison instruction.
def PIC16Subcc : SDNode<"PIC16ISD::SUBCC", SDTI8BinOp, [SDNPOutFlag]>;
def PIC16Selecticc : SDNode<"PIC16ISD::SELECT_ICC", SDT_PIC16Selecticc,
[SDNPInFlag]>;
+def PIC16ret : SDNode<"PIC16ISD::RET", SDTNone, [SDNPHasChain]>;
+
//===----------------------------------------------------------------------===//
// PIC16 Operand Definitions.
//===----------------------------------------------------------------------===//
//===----------------------------------------------------------------------===//
// W = W Op F : Load the value from F and do Op to W.
-let isTwoAddress = 1 in
+let isTwoAddress = 1, mayLoad = 1 in
class BinOpFW<bits<6> OpCode, string OpcStr, SDNode OpNode>:
ByteFormat<OpCode, (outs GPR:$dst),
(ins GPR:$src, i8imm:$offset, i8mem:$ptrlo, i8imm:$ptrhi),
// This insn class is not marked as TwoAddress because the reg is
// being used as a source operand only. (Remember a TwoAddress insn
// needs a copyRegToReg.)
+let mayStore = 1 in
class BinOpWF<bits<6> OpCode, string OpcStr, SDNode OpNode>:
ByteFormat<OpCode, (outs),
(ins GPR:$src, i8imm:$offset, i8mem:$ptrlo, i8imm:$ptrhi),
[(set GPR:$dst, (i8 imm:$src))]>;
// Move a Lo(TGA) to W.
-def movlw_lo : BitFormat<12, (outs GPR:$dst), (ins i8imm:$src),
- "movlw LOW(${src})",
- [(set GPR:$dst, (PIC16Lo tglobaladdr:$src))]>;
+def movlw_lo_1 : BitFormat<12, (outs GPR:$dst), (ins i8imm:$src, i8imm:$src2),
+ "movlw LOW(${src} + ${src2})",
+ [(set GPR:$dst, (PIC16Lo tglobaladdr:$src, imm:$src2 ))]>;
+
+// Move a Lo(TES) to W.
+def movlw_lo_2 : BitFormat<12, (outs GPR:$dst), (ins i8imm:$src, i8imm:$src2),
+ "movlw LOW(${src} + ${src2})",
+ [(set GPR:$dst, (PIC16Lo texternalsym:$src, imm:$src2 ))]>;
// Move a Hi(TGA) to W.
-def movlw_hi : BitFormat<12, (outs GPR:$dst), (ins i8imm:$src),
- "movlw HIGH(${src})",
- [(set GPR:$dst, (PIC16Hi tglobaladdr:$src))]>;
+def movlw_hi_1 : BitFormat<12, (outs GPR:$dst), (ins i8imm:$src, i8imm:$src2),
+ "movlw HIGH(${src} + ${src2})",
+ [(set GPR:$dst, (PIC16Hi tglobaladdr:$src, imm:$src2))]>;
+
+// Move a Hi(TES) to W.
+def movlw_hi_2 : BitFormat<12, (outs GPR:$dst), (ins i8imm:$src, i8imm:$src2),
+ "movlw HIGH(${src} + ${src2})",
+ [(set GPR:$dst, (PIC16Hi texternalsym:$src, imm:$src2))]>;
}
//-------------------
"movwf ${dst}H",
[]>;
+def set_pclath:
+ ByteFormat<0, (outs PCLATHR:$dst),
+ (ins GPR:$val),
+ "movwf ${dst}",
+ [(set PCLATHR:$dst , (MTPCLATH GPR:$val))]>;
+
//----------------------------
// copyRegToReg
// copyRegToReg insns. These are dummy. They should always be deleted
def copy_w:
Pseudo<(outs GPR:$dst), (ins GPR:$src), "copy_w $dst, $src", []>;
+class SAVE_FSR<string OpcStr>:
+ Pseudo<(outs),
+ (ins FSR16:$src, i8imm:$offset, i8mem:$ptrlo, i8imm:$ptrhi),
+ !strconcat(OpcStr, " $ptrlo, $offset"),
+ []>;
+
+def save_fsr0: SAVE_FSR<"save_fsr0">;
+def save_fsr1: SAVE_FSR<"save_fsr1">;
+
+class RESTORE_FSR<string OpcStr>:
+ Pseudo<(outs FSR16:$dst),
+ (ins i8imm:$offset, i8mem:$ptrlo, i8imm:$ptrhi),
+ !strconcat(OpcStr, " $ptrlo, $offset"),
+ []>;
+
+def restore_fsr0: RESTORE_FSR<"restore_fsr0">;
+def restore_fsr1: RESTORE_FSR<"restore_fsr1">;
+
//--------------------------
// Store to memory
//-------------------------
// Direct store.
// Input operands are: val = W, ptrlo = GA, offset = offset, ptrhi = banksel.
+let mayStore = 1 in
class MOVWF_INSN<bits<6> OpCode, SDNode OpNodeDest, SDNode Op>:
ByteFormat<0, (outs),
(ins GPR:$val, i8imm:$offset, i8mem:$ptrlo, i8imm:$ptrhi),
// Direct load.
// Input Operands are: ptrlo = GA, offset = offset, ptrhi = banksel.
// Output: dst = W
+let Defs = [STATUS], mayLoad = 1 in
class MOVF_INSN<bits<6> OpCode, SDNode OpNodeSrc, SDNode Op>:
ByteFormat<0, (outs GPR:$dst),
(ins i8imm:$offset, i8mem:$ptrlo, i8imm:$ptrhi),
// Load from an ES.
def movf_1 : MOVF_INSN<0, texternalsym, PIC16Load>;
+def movf_1_1 : MOVF_INSN<0, texternalsym, PIC16LdArg>;
// Load with InFlag and OutFlag
// This is same as movf_1 but has a flag. A flag is required to
}
// W -= [F] ; load from F and sub the value from W.
-let isTwoAddress = 1 in
+let isTwoAddress = 1, mayLoad = 1 in
class SUBFW<bits<6> OpCode, string OpcStr, SDNode OpNode>:
ByteFormat<OpCode, (outs GPR:$dst),
(ins GPR:$src, i8imm:$offset, i8mem:$ptrlo, i8imm:$ptrhi),
let Uses = [STATUS] in
def subfwb: SUBFW<0, "subwfb", sube>; // With Borrow.
-def subfw_cc: SUBFW<0, "subwf", PIC16Subcc>;
}
+let Defs = [STATUS], isTerminator = 1 in
+def subfw_cc: SUBFW<0, "subwf", PIC16Subcc>;
// [F] -= W ;
+let mayStore = 1 in
class SUBWF<bits<6> OpCode, string OpcStr, SDNode OpNode>:
ByteFormat<OpCode, (outs),
(ins GPR:$src, i8imm:$offset, i8mem:$ptrlo, i8imm:$ptrhi),
let Defs = [STATUS] in {
def sublw_1 : SUBLW<0, sub>;
def sublw_2 : SUBLW<0, subc>;
-def sublw_cc : SUBLW<0, PIC16Subcc>;
}
+let Defs = [STATUS], isTerminator = 1 in
+def sublw_cc : SUBLW<0, PIC16Subcc>;
// Call instruction.
-let isCall = 1 in {
+let isCall = 1,
+ Defs = [W, FSR0, FSR1] in {
def CALL: LiteralFormat<0x1, (outs), (ins i8imm:$func),
+ //"call ${func} + 2",
"call ${func}",
[(PIC16call diraddr:$func)]>;
}
-let Uses = [STATUS] in
+let isCall = 1,
+ Defs = [W, FSR0, FSR1] in {
+ def CALL_1: LiteralFormat<0x1, (outs), (ins GPR:$func, PCLATHR:$pc),
+ "callw",
+ [(PIC16call (PIC16Connect GPR:$func, PCLATHR:$pc))]>;
+}
+
+let isCall = 1,
+ Defs = [FSR0, FSR1] in {
+ def CALLW: LiteralFormat<0x1, (outs GPR:$dest),
+ (ins GPR:$func, PCLATHR:$pc),
+ "callw",
+ [(set GPR:$dest, (PIC16callw (PIC16Connect GPR:$func, PCLATHR:$pc)))]>;
+}
+
+let Uses = [STATUS], isBranch = 1, isTerminator = 1, hasDelaySlot = 0 in
def pic16brcond: ControlFormat<0x0, (outs), (ins brtarget:$dst, CCOp:$cc),
"b$cc $dst",
[(PIC16Brcond bb:$dst, imm:$cc)]>;
// Unconditional branch.
+let isBranch = 1, isTerminator = 1, hasDelaySlot = 0 in
def br_uncond: ControlFormat<0x0, (outs), (ins brtarget:$dst),
"goto $dst",
[(br bb:$dst)]>;
// Banksel.
-let isReMaterializable = 1 in {
def banksel :
- Pseudo<(outs BSR:$dst),
+ Pseudo<(outs),
(ins i8mem:$ptr),
"banksel $ptr",
- [(set BSR:$dst, (Banksel tglobaladdr:$ptr))]>;
-}
+ []>;
+
+def pagesel :
+ Pseudo<(outs),
+ (ins i8mem:$ptr),
+ "movlp $ptr",
+ []>;
+
// Return insn.
+let isTerminator = 1, isBarrier = 1, isReturn = 1 in
def Return :
- ControlFormat<0, (outs), (ins), "return", [(ret)]>;
-
+ ControlFormat<0, (outs), (ins), "return", [(PIC16ret)]>;
+
//===----------------------------------------------------------------------===//
// PIC16 Replacment Patterns.
//===----------------------------------------------------------------------===//
(set_fsrhi (set_fsrlo GPR:$loaddr), GPR:$hiaddr),
imm:$offset)>;
+def : Pat<(PIC16StWF GPR:$val, (MTLO GPR:$loaddr), (MTHI GPR:$hiaddr),
+ imm:$offset),
+ (store_indirect GPR:$val,
+ (set_fsrhi (set_fsrlo GPR:$loaddr), GPR:$hiaddr),
+ imm:$offset)>;
+
// Identify an indirect load and select insns for it.
def : Pat<(PIC16Load (MTLO GPR:$loaddr), (MTHI GPR:$hiaddr),
imm:$offset),
(load_indirect (set_fsrhi (set_fsrlo GPR:$loaddr), GPR:$hiaddr),
imm:$offset)>;
+def : Pat<(PIC16LdWF (MTLO GPR:$loaddr), (MTHI GPR:$hiaddr),
+ imm:$offset),
+ (load_indirect (set_fsrhi (set_fsrlo GPR:$loaddr), GPR:$hiaddr),
+ imm:$offset)>;
+