#include "PPCISelLowering.h"
#include "PPCTargetMachine.h"
+#include "PPCPerfectShuffle.h"
#include "llvm/ADT/VectorExtras.h"
#include "llvm/Analysis/ScalarEvolutionExpressions.h"
#include "llvm/CodeGen/MachineFrameInfo.h"
// PowerPC has no SREM/UREM instructions
setOperationAction(ISD::SREM, MVT::i32, Expand);
setOperationAction(ISD::UREM, MVT::i32, Expand);
+ setOperationAction(ISD::SREM, MVT::i64, Expand);
+ setOperationAction(ISD::UREM, MVT::i64, Expand);
// We don't support sin/cos/sqrt/fmod
setOperationAction(ISD::FSIN , MVT::f64, Expand);
// PowerPC does not have truncstore for i1.
setOperationAction(ISD::TRUNCSTORE, MVT::i1, Promote);
+ // We cannot sextinreg(i1). Expand to shifts.
+ setOperationAction(ISD::SIGN_EXTEND_INREG, MVT::i1, Expand);
+
+
// Support label based line numbers.
setOperationAction(ISD::LOCATION, MVT::Other, Expand);
setOperationAction(ISD::DEBUG_LOC, MVT::Other, Expand);
// appropriate instructions to materialize the address.
setOperationAction(ISD::GlobalAddress, MVT::i32, Custom);
setOperationAction(ISD::ConstantPool, MVT::i32, Custom);
-
+ setOperationAction(ISD::JumpTable, MVT::i32, Custom);
+ setOperationAction(ISD::GlobalAddress, MVT::i64, Custom);
+ setOperationAction(ISD::ConstantPool, MVT::i64, Custom);
+ setOperationAction(ISD::JumpTable, MVT::i64, Custom);
+
// RET must be custom lowered, to meet ABI requirements
setOperationAction(ISD::RET , MVT::Other, Custom);
setOperationAction(ISD::DYNAMIC_STACKALLOC, MVT::i32 , Expand);
// We want to custom lower some of our intrinsics.
- setOperationAction(ISD::INTRINSIC , MVT::Other, Custom);
+ setOperationAction(ISD::INTRINSIC_WO_CHAIN, MVT::Other, Custom);
- if (TM.getSubtarget<PPCSubtarget>().is64Bit()) {
+ if (TM.getSubtarget<PPCSubtarget>().has64BitSupport()) {
// They also have instructions for converting between i64 and fp.
setOperationAction(ISD::FP_TO_SINT, MVT::i64, Custom);
setOperationAction(ISD::SINT_TO_FP, MVT::i64, Custom);
setOperationAction(ISD::FP_TO_UINT, MVT::i32, Expand);
}
- if (TM.getSubtarget<PPCSubtarget>().has64BitRegs()) {
+ if (TM.getSubtarget<PPCSubtarget>().use64BitRegs()) {
// 64 bit PowerPC implementations can support i64 types directly
addRegisterClass(MVT::i64, PPC::G8RCRegisterClass);
// BUILD_PAIR can't be handled natively, and should be expanded to shl/or
setOperationAction(ISD::SRL, MVT::i64, Custom);
setOperationAction(ISD::SRA, MVT::i64, Custom);
}
-
- // First set operation action for all vector types to expand. Then we
- // will selectively turn on ones that can be effectively codegen'd.
- for (unsigned VT = (unsigned)MVT::Vector + 1;
- VT != (unsigned)MVT::LAST_VALUETYPE; VT++) {
- setOperationAction(ISD::ADD , (MVT::ValueType)VT, Expand);
- setOperationAction(ISD::SUB , (MVT::ValueType)VT, Expand);
- setOperationAction(ISD::MUL , (MVT::ValueType)VT, Expand);
- setOperationAction(ISD::VECTOR_SHUFFLE, (MVT::ValueType)VT, Expand);
- setOperationAction(ISD::EXTRACT_VECTOR_ELT, (MVT::ValueType)VT, Expand);
- setOperationAction(ISD::BUILD_VECTOR, (MVT::ValueType)VT, Expand);
- }
if (TM.getSubtarget<PPCSubtarget>().hasAltivec()) {
+ // First set operation action for all vector types to expand. Then we
+ // will selectively turn on ones that can be effectively codegen'd.
+ for (unsigned VT = (unsigned)MVT::FIRST_VECTOR_VALUETYPE;
+ VT != (unsigned)MVT::LAST_VECTOR_VALUETYPE; ++VT) {
+ // add/sub are legal for all supported vector VT's.
+ setOperationAction(ISD::ADD , (MVT::ValueType)VT, Legal);
+ setOperationAction(ISD::SUB , (MVT::ValueType)VT, Legal);
+
+ // We promote all shuffles to v16i8.
+ setOperationAction(ISD::VECTOR_SHUFFLE, (MVT::ValueType)VT, Promote);
+ AddPromotedToType (ISD::VECTOR_SHUFFLE, (MVT::ValueType)VT, MVT::v16i8);
+
+ // We promote all non-typed operations to v4i32.
+ setOperationAction(ISD::AND , (MVT::ValueType)VT, Promote);
+ AddPromotedToType (ISD::AND , (MVT::ValueType)VT, MVT::v4i32);
+ setOperationAction(ISD::OR , (MVT::ValueType)VT, Promote);
+ AddPromotedToType (ISD::OR , (MVT::ValueType)VT, MVT::v4i32);
+ setOperationAction(ISD::XOR , (MVT::ValueType)VT, Promote);
+ AddPromotedToType (ISD::XOR , (MVT::ValueType)VT, MVT::v4i32);
+ setOperationAction(ISD::LOAD , (MVT::ValueType)VT, Promote);
+ AddPromotedToType (ISD::LOAD , (MVT::ValueType)VT, MVT::v4i32);
+ setOperationAction(ISD::SELECT, (MVT::ValueType)VT, Promote);
+ AddPromotedToType (ISD::SELECT, (MVT::ValueType)VT, MVT::v4i32);
+ setOperationAction(ISD::STORE, (MVT::ValueType)VT, Promote);
+ AddPromotedToType (ISD::STORE, (MVT::ValueType)VT, MVT::v4i32);
+
+ // No other operations are legal.
+ setOperationAction(ISD::MUL , (MVT::ValueType)VT, Expand);
+ setOperationAction(ISD::SDIV, (MVT::ValueType)VT, Expand);
+ setOperationAction(ISD::SREM, (MVT::ValueType)VT, Expand);
+ setOperationAction(ISD::UDIV, (MVT::ValueType)VT, Expand);
+ setOperationAction(ISD::UREM, (MVT::ValueType)VT, Expand);
+ setOperationAction(ISD::FDIV, (MVT::ValueType)VT, Expand);
+ setOperationAction(ISD::EXTRACT_VECTOR_ELT, (MVT::ValueType)VT, Expand);
+ setOperationAction(ISD::INSERT_VECTOR_ELT, (MVT::ValueType)VT, Expand);
+ setOperationAction(ISD::BUILD_VECTOR, (MVT::ValueType)VT, Expand);
+
+ setOperationAction(ISD::SCALAR_TO_VECTOR, (MVT::ValueType)VT, Expand);
+ }
+
+ // We can custom expand all VECTOR_SHUFFLEs to VPERM, others we can handle
+ // with merges, splats, etc.
+ setOperationAction(ISD::VECTOR_SHUFFLE, MVT::v16i8, Custom);
+
+ setOperationAction(ISD::AND , MVT::v4i32, Legal);
+ setOperationAction(ISD::OR , MVT::v4i32, Legal);
+ setOperationAction(ISD::XOR , MVT::v4i32, Legal);
+ setOperationAction(ISD::LOAD , MVT::v4i32, Legal);
+ setOperationAction(ISD::SELECT, MVT::v4i32, Expand);
+ setOperationAction(ISD::STORE , MVT::v4i32, Legal);
+
addRegisterClass(MVT::v4f32, PPC::VRRCRegisterClass);
addRegisterClass(MVT::v4i32, PPC::VRRCRegisterClass);
addRegisterClass(MVT::v8i16, PPC::VRRCRegisterClass);
addRegisterClass(MVT::v16i8, PPC::VRRCRegisterClass);
- setOperationAction(ISD::ADD , MVT::v4f32, Legal);
- setOperationAction(ISD::SUB , MVT::v4f32, Legal);
- setOperationAction(ISD::MUL , MVT::v4f32, Legal);
- setOperationAction(ISD::ADD , MVT::v4i32, Legal);
-
- setOperationAction(ISD::VECTOR_SHUFFLE, MVT::v4i32, Custom);
- setOperationAction(ISD::VECTOR_SHUFFLE, MVT::v4f32, Custom);
+ setOperationAction(ISD::MUL, MVT::v4f32, Legal);
+ setOperationAction(ISD::MUL, MVT::v4i32, Custom);
+ setOperationAction(ISD::MUL, MVT::v8i16, Custom);
+ setOperationAction(ISD::MUL, MVT::v16i8, Custom);
setOperationAction(ISD::SCALAR_TO_VECTOR, MVT::v4f32, Custom);
setOperationAction(ISD::SCALAR_TO_VECTOR, MVT::v4i32, Custom);
+ setOperationAction(ISD::BUILD_VECTOR, MVT::v16i8, Custom);
+ setOperationAction(ISD::BUILD_VECTOR, MVT::v8i16, Custom);
setOperationAction(ISD::BUILD_VECTOR, MVT::v4i32, Custom);
setOperationAction(ISD::BUILD_VECTOR, MVT::v4f32, Custom);
}
+ setSetCCResultType(MVT::i32);
+ setShiftAmountType(MVT::i32);
setSetCCResultContents(ZeroOrOneSetCCResult);
setStackPointerRegisterToSaveRestore(PPC::R1);
// We have target-specific dag combine patterns for the following nodes:
setTargetDAGCombine(ISD::SINT_TO_FP);
setTargetDAGCombine(ISD::STORE);
+ setTargetDAGCombine(ISD::BR_CC);
computeRegisterProperties();
}
case PPCISD::STFIWX: return "PPCISD::STFIWX";
case PPCISD::VMADDFP: return "PPCISD::VMADDFP";
case PPCISD::VNMSUBFP: return "PPCISD::VNMSUBFP";
- case PPCISD::LVE_X: return "PPCISD::LVE_X";
case PPCISD::VPERM: return "PPCISD::VPERM";
case PPCISD::Hi: return "PPCISD::Hi";
case PPCISD::Lo: return "PPCISD::Lo";
case PPCISD::EXTSW_32: return "PPCISD::EXTSW_32";
case PPCISD::STD_32: return "PPCISD::STD_32";
case PPCISD::CALL: return "PPCISD::CALL";
+ case PPCISD::MTCTR: return "PPCISD::MTCTR";
+ case PPCISD::BCTRL: return "PPCISD::BCTRL";
case PPCISD::RET_FLAG: return "PPCISD::RET_FLAG";
case PPCISD::MFCR: return "PPCISD::MFCR";
+ case PPCISD::VCMP: return "PPCISD::VCMP";
case PPCISD::VCMPo: return "PPCISD::VCMPo";
+ case PPCISD::COND_BRANCH: return "PPCISD::COND_BRANCH";
}
}
+//===----------------------------------------------------------------------===//
+// Node matching predicates, for use by the tblgen matching code.
+//===----------------------------------------------------------------------===//
+
/// isFloatingPointZero - Return true if this is 0.0 or -0.0.
static bool isFloatingPointZero(SDOperand Op) {
if (ConstantFPSDNode *CFP = dyn_cast<ConstantFPSDNode>(Op))
return false;
}
+/// isConstantOrUndef - Op is either an undef node or a ConstantSDNode. Return
+/// true if Op is undef or if it matches the specified value.
+static bool isConstantOrUndef(SDOperand Op, unsigned Val) {
+ return Op.getOpcode() == ISD::UNDEF ||
+ cast<ConstantSDNode>(Op)->getValue() == Val;
+}
+
+/// isVPKUHUMShuffleMask - Return true if this is the shuffle mask for a
+/// VPKUHUM instruction.
+bool PPC::isVPKUHUMShuffleMask(SDNode *N, bool isUnary) {
+ if (!isUnary) {
+ for (unsigned i = 0; i != 16; ++i)
+ if (!isConstantOrUndef(N->getOperand(i), i*2+1))
+ return false;
+ } else {
+ for (unsigned i = 0; i != 8; ++i)
+ if (!isConstantOrUndef(N->getOperand(i), i*2+1) ||
+ !isConstantOrUndef(N->getOperand(i+8), i*2+1))
+ return false;
+ }
+ return true;
+}
+
+/// isVPKUWUMShuffleMask - Return true if this is the shuffle mask for a
+/// VPKUWUM instruction.
+bool PPC::isVPKUWUMShuffleMask(SDNode *N, bool isUnary) {
+ if (!isUnary) {
+ for (unsigned i = 0; i != 16; i += 2)
+ if (!isConstantOrUndef(N->getOperand(i ), i*2+2) ||
+ !isConstantOrUndef(N->getOperand(i+1), i*2+3))
+ return false;
+ } else {
+ for (unsigned i = 0; i != 8; i += 2)
+ if (!isConstantOrUndef(N->getOperand(i ), i*2+2) ||
+ !isConstantOrUndef(N->getOperand(i+1), i*2+3) ||
+ !isConstantOrUndef(N->getOperand(i+8), i*2+2) ||
+ !isConstantOrUndef(N->getOperand(i+9), i*2+3))
+ return false;
+ }
+ return true;
+}
+
+/// isVMerge - Common function, used to match vmrg* shuffles.
+///
+static bool isVMerge(SDNode *N, unsigned UnitSize,
+ unsigned LHSStart, unsigned RHSStart) {
+ assert(N->getOpcode() == ISD::BUILD_VECTOR &&
+ N->getNumOperands() == 16 && "PPC only supports shuffles by bytes!");
+ assert((UnitSize == 1 || UnitSize == 2 || UnitSize == 4) &&
+ "Unsupported merge size!");
+
+ for (unsigned i = 0; i != 8/UnitSize; ++i) // Step over units
+ for (unsigned j = 0; j != UnitSize; ++j) { // Step over bytes within unit
+ if (!isConstantOrUndef(N->getOperand(i*UnitSize*2+j),
+ LHSStart+j+i*UnitSize) ||
+ !isConstantOrUndef(N->getOperand(i*UnitSize*2+UnitSize+j),
+ RHSStart+j+i*UnitSize))
+ return false;
+ }
+ return true;
+}
+
+/// isVMRGLShuffleMask - Return true if this is a shuffle mask suitable for
+/// a VRGL* instruction with the specified unit size (1,2 or 4 bytes).
+bool PPC::isVMRGLShuffleMask(SDNode *N, unsigned UnitSize, bool isUnary) {
+ if (!isUnary)
+ return isVMerge(N, UnitSize, 8, 24);
+ return isVMerge(N, UnitSize, 8, 8);
+}
+
+/// isVMRGHShuffleMask - Return true if this is a shuffle mask suitable for
+/// a VRGH* instruction with the specified unit size (1,2 or 4 bytes).
+bool PPC::isVMRGHShuffleMask(SDNode *N, unsigned UnitSize, bool isUnary) {
+ if (!isUnary)
+ return isVMerge(N, UnitSize, 0, 16);
+ return isVMerge(N, UnitSize, 0, 0);
+}
+
+
+/// isVSLDOIShuffleMask - If this is a vsldoi shuffle mask, return the shift
+/// amount, otherwise return -1.
+int PPC::isVSLDOIShuffleMask(SDNode *N, bool isUnary) {
+ assert(N->getOpcode() == ISD::BUILD_VECTOR &&
+ N->getNumOperands() == 16 && "PPC only supports shuffles by bytes!");
+ // Find the first non-undef value in the shuffle mask.
+ unsigned i;
+ for (i = 0; i != 16 && N->getOperand(i).getOpcode() == ISD::UNDEF; ++i)
+ /*search*/;
+
+ if (i == 16) return -1; // all undef.
+
+ // Otherwise, check to see if the rest of the elements are consequtively
+ // numbered from this value.
+ unsigned ShiftAmt = cast<ConstantSDNode>(N->getOperand(i))->getValue();
+ if (ShiftAmt < i) return -1;
+ ShiftAmt -= i;
+
+ if (!isUnary) {
+ // Check the rest of the elements to see if they are consequtive.
+ for (++i; i != 16; ++i)
+ if (!isConstantOrUndef(N->getOperand(i), ShiftAmt+i))
+ return -1;
+ } else {
+ // Check the rest of the elements to see if they are consequtive.
+ for (++i; i != 16; ++i)
+ if (!isConstantOrUndef(N->getOperand(i), (ShiftAmt+i) & 15))
+ return -1;
+ }
+
+ return ShiftAmt;
+}
/// isSplatShuffleMask - Return true if the specified VECTOR_SHUFFLE operand
/// specifies a splat of a single element that is suitable for input to
/// VSPLTB/VSPLTH/VSPLTW.
-bool PPC::isSplatShuffleMask(SDNode *N) {
- assert(N->getOpcode() == ISD::BUILD_VECTOR);
-
- // We can only splat 8-bit, 16-bit, and 32-bit quantities.
- if (N->getNumOperands() != 4 && N->getNumOperands() != 8 &&
- N->getNumOperands() != 16)
- return false;
+bool PPC::isSplatShuffleMask(SDNode *N, unsigned EltSize) {
+ assert(N->getOpcode() == ISD::BUILD_VECTOR &&
+ N->getNumOperands() == 16 &&
+ (EltSize == 1 || EltSize == 2 || EltSize == 4));
// This is a splat operation if each element of the permute is the same, and
// if the value doesn't reference the second vector.
+ unsigned ElementBase = 0;
SDOperand Elt = N->getOperand(0);
+ if (ConstantSDNode *EltV = dyn_cast<ConstantSDNode>(Elt))
+ ElementBase = EltV->getValue();
+ else
+ return false; // FIXME: Handle UNDEF elements too!
+
+ if (cast<ConstantSDNode>(Elt)->getValue() >= 16)
+ return false;
+
+ // Check that they are consequtive.
+ for (unsigned i = 1; i != EltSize; ++i) {
+ if (!isa<ConstantSDNode>(N->getOperand(i)) ||
+ cast<ConstantSDNode>(N->getOperand(i))->getValue() != i+ElementBase)
+ return false;
+ }
+
assert(isa<ConstantSDNode>(Elt) && "Invalid VECTOR_SHUFFLE mask!");
- for (unsigned i = 1, e = N->getNumOperands(); i != e; ++i) {
+ for (unsigned i = EltSize, e = 16; i != e; i += EltSize) {
+ if (N->getOperand(i).getOpcode() == ISD::UNDEF) continue;
assert(isa<ConstantSDNode>(N->getOperand(i)) &&
"Invalid VECTOR_SHUFFLE mask!");
- if (N->getOperand(i) != Elt) return false;
+ for (unsigned j = 0; j != EltSize; ++j)
+ if (N->getOperand(i+j) != N->getOperand(j))
+ return false;
}
- // Make sure it is a splat of the first vector operand.
- return cast<ConstantSDNode>(Elt)->getValue() < N->getNumOperands();
+ return true;
}
/// getVSPLTImmediate - Return the appropriate VSPLT* immediate to splat the
/// specified isSplatShuffleMask VECTOR_SHUFFLE mask.
-unsigned PPC::getVSPLTImmediate(SDNode *N) {
- assert(isSplatShuffleMask(N));
- return cast<ConstantSDNode>(N->getOperand(0))->getValue();
+unsigned PPC::getVSPLTImmediate(SDNode *N, unsigned EltSize) {
+ assert(isSplatShuffleMask(N, EltSize));
+ return cast<ConstantSDNode>(N->getOperand(0))->getValue() / EltSize;
}
-/// isVecSplatImm - Return true if this is a build_vector of constants which
-/// can be formed by using a vspltis[bhw] instruction. The ByteSize field
-/// indicates the number of bytes of each element [124] -> [bhw].
-bool PPC::isVecSplatImm(SDNode *N, unsigned ByteSize, char *Val) {
+/// get_VSPLTI_elt - If this is a build_vector of constants which can be formed
+/// by using a vspltis[bhw] instruction of the specified element size, return
+/// the constant being splatted. The ByteSize field indicates the number of
+/// bytes of each element [124] -> [bhw].
+SDOperand PPC::get_VSPLTI_elt(SDNode *N, unsigned ByteSize, SelectionDAG &DAG) {
SDOperand OpVal(0, 0);
+
+ // If ByteSize of the splat is bigger than the element size of the
+ // build_vector, then we have a case where we are checking for a splat where
+ // multiple elements of the buildvector are folded together into a single
+ // logical element of the splat (e.g. "vsplish 1" to splat {0,1}*8).
+ unsigned EltSize = 16/N->getNumOperands();
+ if (EltSize < ByteSize) {
+ unsigned Multiple = ByteSize/EltSize; // Number of BV entries per spltval.
+ SDOperand UniquedVals[4];
+ assert(Multiple > 1 && Multiple <= 4 && "How can this happen?");
+
+ // See if all of the elements in the buildvector agree across.
+ for (unsigned i = 0, e = N->getNumOperands(); i != e; ++i) {
+ if (N->getOperand(i).getOpcode() == ISD::UNDEF) continue;
+ // If the element isn't a constant, bail fully out.
+ if (!isa<ConstantSDNode>(N->getOperand(i))) return SDOperand();
+
+
+ if (UniquedVals[i&(Multiple-1)].Val == 0)
+ UniquedVals[i&(Multiple-1)] = N->getOperand(i);
+ else if (UniquedVals[i&(Multiple-1)] != N->getOperand(i))
+ return SDOperand(); // no match.
+ }
+
+ // Okay, if we reached this point, UniquedVals[0..Multiple-1] contains
+ // either constant or undef values that are identical for each chunk. See
+ // if these chunks can form into a larger vspltis*.
+
+ // Check to see if all of the leading entries are either 0 or -1. If
+ // neither, then this won't fit into the immediate field.
+ bool LeadingZero = true;
+ bool LeadingOnes = true;
+ for (unsigned i = 0; i != Multiple-1; ++i) {
+ if (UniquedVals[i].Val == 0) continue; // Must have been undefs.
+
+ LeadingZero &= cast<ConstantSDNode>(UniquedVals[i])->isNullValue();
+ LeadingOnes &= cast<ConstantSDNode>(UniquedVals[i])->isAllOnesValue();
+ }
+ // Finally, check the least significant entry.
+ if (LeadingZero) {
+ if (UniquedVals[Multiple-1].Val == 0)
+ return DAG.getTargetConstant(0, MVT::i32); // 0,0,0,undef
+ int Val = cast<ConstantSDNode>(UniquedVals[Multiple-1])->getValue();
+ if (Val < 16)
+ return DAG.getTargetConstant(Val, MVT::i32); // 0,0,0,4 -> vspltisw(4)
+ }
+ if (LeadingOnes) {
+ if (UniquedVals[Multiple-1].Val == 0)
+ return DAG.getTargetConstant(~0U, MVT::i32); // -1,-1,-1,undef
+ int Val =cast<ConstantSDNode>(UniquedVals[Multiple-1])->getSignExtended();
+ if (Val >= -16) // -1,-1,-1,-2 -> vspltisw(-2)
+ return DAG.getTargetConstant(Val, MVT::i32);
+ }
+
+ return SDOperand();
+ }
+
// Check to see if this buildvec has a single non-undef value in its elements.
for (unsigned i = 0, e = N->getNumOperands(); i != e; ++i) {
if (N->getOperand(i).getOpcode() == ISD::UNDEF) continue;
if (OpVal.Val == 0)
OpVal = N->getOperand(i);
else if (OpVal != N->getOperand(i))
- return false;
+ return SDOperand();
}
- if (OpVal.Val == 0) return false; // All UNDEF: use implicit def.
+ if (OpVal.Val == 0) return SDOperand(); // All UNDEF: use implicit def.
- unsigned ValSizeInBytes;
- uint64_t Value;
+ unsigned ValSizeInBytes = 0;
+ uint64_t Value = 0;
if (ConstantSDNode *CN = dyn_cast<ConstantSDNode>(OpVal)) {
Value = CN->getValue();
ValSizeInBytes = MVT::getSizeInBits(CN->getValueType(0))/8;
// If the splat value is larger than the element value, then we can never do
// this splat. The only case that we could fit the replicated bits into our
// immediate field for would be zero, and we prefer to use vxor for it.
- if (ValSizeInBytes < ByteSize) return false;
+ if (ValSizeInBytes < ByteSize) return SDOperand();
// If the element value is larger than the splat value, cut it in half and
// check to see if the two halves are equal. Continue doing this until we
ValSizeInBytes >>= 1;
// If the top half equals the bottom half, we're still ok.
- if (((Value >> (ValSizeInBytes*8)) & ((8 << ValSizeInBytes)-1)) !=
- (Value & ((8 << ValSizeInBytes)-1)))
- return false;
+ if (((Value >> (ValSizeInBytes*8)) & ((1 << (8*ValSizeInBytes))-1)) !=
+ (Value & ((1 << (8*ValSizeInBytes))-1)))
+ return SDOperand();
}
// Properly sign extend the value.
int MaskVal = ((int)Value << ShAmt) >> ShAmt;
// If this is zero, don't match, zero matches ISD::isBuildVectorAllZeros.
- if (MaskVal == 0) return false;
+ if (MaskVal == 0) return SDOperand();
- if (Val) *Val = MaskVal;
-
- // Finally, if this value fits in a 5 bit sext field, return true.
- return ((MaskVal << (32-5)) >> (32-5)) == MaskVal;
+ // Finally, if this value fits in a 5 bit sext field, return it
+ if (((MaskVal << (32-5)) >> (32-5)) == MaskVal)
+ return DAG.getTargetConstant(MaskVal, MVT::i32);
+ return SDOperand();
}
+//===----------------------------------------------------------------------===//
+// LowerOperation implementation
+//===----------------------------------------------------------------------===//
-/// LowerOperation - Provide custom lowering hooks for some operations.
-///
-SDOperand PPCTargetLowering::LowerOperation(SDOperand Op, SelectionDAG &DAG) {
- switch (Op.getOpcode()) {
- default: assert(0 && "Wasn't expecting to be able to lower this!");
- case ISD::FP_TO_SINT: {
- assert(MVT::isFloatingPoint(Op.getOperand(0).getValueType()));
- SDOperand Src = Op.getOperand(0);
- if (Src.getValueType() == MVT::f32)
- Src = DAG.getNode(ISD::FP_EXTEND, MVT::f64, Src);
-
- SDOperand Tmp;
- switch (Op.getValueType()) {
- default: assert(0 && "Unhandled FP_TO_SINT type in custom expander!");
- case MVT::i32:
- Tmp = DAG.getNode(PPCISD::FCTIWZ, MVT::f64, Src);
- break;
- case MVT::i64:
- Tmp = DAG.getNode(PPCISD::FCTIDZ, MVT::f64, Src);
- break;
- }
-
- // Convert the FP value to an int value through memory.
- SDOperand Bits = DAG.getNode(ISD::BIT_CONVERT, MVT::i64, Tmp);
- if (Op.getValueType() == MVT::i32)
- Bits = DAG.getNode(ISD::TRUNCATE, MVT::i32, Bits);
- return Bits;
- }
- case ISD::SINT_TO_FP:
- if (Op.getOperand(0).getValueType() == MVT::i64) {
- SDOperand Bits = DAG.getNode(ISD::BIT_CONVERT, MVT::f64, Op.getOperand(0));
- SDOperand FP = DAG.getNode(PPCISD::FCFID, MVT::f64, Bits);
- if (Op.getValueType() == MVT::f32)
- FP = DAG.getNode(ISD::FP_ROUND, MVT::f32, FP);
- return FP;
- } else {
- assert(Op.getOperand(0).getValueType() == MVT::i32 &&
- "Unhandled SINT_TO_FP type in custom expander!");
- // Since we only generate this in 64-bit mode, we can take advantage of
- // 64-bit registers. In particular, sign extend the input value into the
- // 64-bit register with extsw, store the WHOLE 64-bit value into the stack
- // then lfd it and fcfid it.
- MachineFrameInfo *FrameInfo = DAG.getMachineFunction().getFrameInfo();
- int FrameIdx = FrameInfo->CreateStackObject(8, 8);
- SDOperand FIdx = DAG.getFrameIndex(FrameIdx, MVT::i32);
-
- SDOperand Ext64 = DAG.getNode(PPCISD::EXTSW_32, MVT::i32,
- Op.getOperand(0));
-
- // STD the extended value into the stack slot.
- SDOperand Store = DAG.getNode(PPCISD::STD_32, MVT::Other,
- DAG.getEntryNode(), Ext64, FIdx,
- DAG.getSrcValue(NULL));
- // Load the value as a double.
- SDOperand Ld = DAG.getLoad(MVT::f64, Store, FIdx, DAG.getSrcValue(NULL));
-
- // FCFID it and return it.
- SDOperand FP = DAG.getNode(PPCISD::FCFID, MVT::f64, Ld);
- if (Op.getValueType() == MVT::f32)
- FP = DAG.getNode(ISD::FP_ROUND, MVT::f32, FP);
- return FP;
- }
- break;
+static SDOperand LowerConstantPool(SDOperand Op, SelectionDAG &DAG) {
+ MVT::ValueType PtrVT = Op.getValueType();
+ ConstantPoolSDNode *CP = cast<ConstantPoolSDNode>(Op);
+ Constant *C = CP->get();
+ SDOperand CPI = DAG.getTargetConstantPool(C, PtrVT, CP->getAlignment());
+ SDOperand Zero = DAG.getConstant(0, PtrVT);
- case ISD::SELECT_CC: {
- // Turn FP only select_cc's into fsel instructions.
- if (!MVT::isFloatingPoint(Op.getOperand(0).getValueType()) ||
- !MVT::isFloatingPoint(Op.getOperand(2).getValueType()))
- break;
-
- ISD::CondCode CC = cast<CondCodeSDNode>(Op.getOperand(4))->get();
-
- // Cannot handle SETEQ/SETNE.
- if (CC == ISD::SETEQ || CC == ISD::SETNE) break;
-
- MVT::ValueType ResVT = Op.getValueType();
- MVT::ValueType CmpVT = Op.getOperand(0).getValueType();
- SDOperand LHS = Op.getOperand(0), RHS = Op.getOperand(1);
- SDOperand TV = Op.getOperand(2), FV = Op.getOperand(3);
-
- // If the RHS of the comparison is a 0.0, we don't need to do the
- // subtraction at all.
- if (isFloatingPointZero(RHS))
- switch (CC) {
- default: break; // SETUO etc aren't handled by fsel.
- case ISD::SETULT:
- case ISD::SETLT:
- std::swap(TV, FV); // fsel is natively setge, swap operands for setlt
- case ISD::SETUGE:
- case ISD::SETGE:
- if (LHS.getValueType() == MVT::f32) // Comparison is always 64-bits
- LHS = DAG.getNode(ISD::FP_EXTEND, MVT::f64, LHS);
- return DAG.getNode(PPCISD::FSEL, ResVT, LHS, TV, FV);
- case ISD::SETUGT:
- case ISD::SETGT:
- std::swap(TV, FV); // fsel is natively setge, swap operands for setlt
- case ISD::SETULE:
- case ISD::SETLE:
- if (LHS.getValueType() == MVT::f32) // Comparison is always 64-bits
- LHS = DAG.getNode(ISD::FP_EXTEND, MVT::f64, LHS);
- return DAG.getNode(PPCISD::FSEL, ResVT,
- DAG.getNode(ISD::FNEG, MVT::f64, LHS), TV, FV);
- }
-
- SDOperand Cmp;
- switch (CC) {
- default: break; // SETUO etc aren't handled by fsel.
- case ISD::SETULT:
- case ISD::SETLT:
- Cmp = DAG.getNode(ISD::FSUB, CmpVT, LHS, RHS);
- if (Cmp.getValueType() == MVT::f32) // Comparison is always 64-bits
- Cmp = DAG.getNode(ISD::FP_EXTEND, MVT::f64, Cmp);
- return DAG.getNode(PPCISD::FSEL, ResVT, Cmp, FV, TV);
- case ISD::SETUGE:
- case ISD::SETGE:
- Cmp = DAG.getNode(ISD::FSUB, CmpVT, LHS, RHS);
- if (Cmp.getValueType() == MVT::f32) // Comparison is always 64-bits
- Cmp = DAG.getNode(ISD::FP_EXTEND, MVT::f64, Cmp);
- return DAG.getNode(PPCISD::FSEL, ResVT, Cmp, TV, FV);
- case ISD::SETUGT:
- case ISD::SETGT:
- Cmp = DAG.getNode(ISD::FSUB, CmpVT, RHS, LHS);
- if (Cmp.getValueType() == MVT::f32) // Comparison is always 64-bits
- Cmp = DAG.getNode(ISD::FP_EXTEND, MVT::f64, Cmp);
- return DAG.getNode(PPCISD::FSEL, ResVT, Cmp, FV, TV);
- case ISD::SETULE:
- case ISD::SETLE:
- Cmp = DAG.getNode(ISD::FSUB, CmpVT, RHS, LHS);
- if (Cmp.getValueType() == MVT::f32) // Comparison is always 64-bits
- Cmp = DAG.getNode(ISD::FP_EXTEND, MVT::f64, Cmp);
- return DAG.getNode(PPCISD::FSEL, ResVT, Cmp, TV, FV);
- }
- break;
- }
- case ISD::SHL: {
- assert(Op.getValueType() == MVT::i64 &&
- Op.getOperand(1).getValueType() == MVT::i32 && "Unexpected SHL!");
- // The generic code does a fine job expanding shift by a constant.
- if (isa<ConstantSDNode>(Op.getOperand(1))) break;
-
- // Otherwise, expand into a bunch of logical ops. Note that these ops
- // depend on the PPC behavior for oversized shift amounts.
- SDOperand Lo = DAG.getNode(ISD::EXTRACT_ELEMENT, MVT::i32, Op.getOperand(0),
- DAG.getConstant(0, MVT::i32));
- SDOperand Hi = DAG.getNode(ISD::EXTRACT_ELEMENT, MVT::i32, Op.getOperand(0),
- DAG.getConstant(1, MVT::i32));
- SDOperand Amt = Op.getOperand(1);
-
- SDOperand Tmp1 = DAG.getNode(ISD::SUB, MVT::i32,
- DAG.getConstant(32, MVT::i32), Amt);
- SDOperand Tmp2 = DAG.getNode(PPCISD::SHL, MVT::i32, Hi, Amt);
- SDOperand Tmp3 = DAG.getNode(PPCISD::SRL, MVT::i32, Lo, Tmp1);
- SDOperand Tmp4 = DAG.getNode(ISD::OR , MVT::i32, Tmp2, Tmp3);
- SDOperand Tmp5 = DAG.getNode(ISD::ADD, MVT::i32, Amt,
- DAG.getConstant(-32U, MVT::i32));
- SDOperand Tmp6 = DAG.getNode(PPCISD::SHL, MVT::i32, Lo, Tmp5);
- SDOperand OutHi = DAG.getNode(ISD::OR, MVT::i32, Tmp4, Tmp6);
- SDOperand OutLo = DAG.getNode(PPCISD::SHL, MVT::i32, Lo, Amt);
- return DAG.getNode(ISD::BUILD_PAIR, MVT::i64, OutLo, OutHi);
- }
- case ISD::SRL: {
- assert(Op.getValueType() == MVT::i64 &&
- Op.getOperand(1).getValueType() == MVT::i32 && "Unexpected SHL!");
- // The generic code does a fine job expanding shift by a constant.
- if (isa<ConstantSDNode>(Op.getOperand(1))) break;
-
- // Otherwise, expand into a bunch of logical ops. Note that these ops
- // depend on the PPC behavior for oversized shift amounts.
- SDOperand Lo = DAG.getNode(ISD::EXTRACT_ELEMENT, MVT::i32, Op.getOperand(0),
- DAG.getConstant(0, MVT::i32));
- SDOperand Hi = DAG.getNode(ISD::EXTRACT_ELEMENT, MVT::i32, Op.getOperand(0),
- DAG.getConstant(1, MVT::i32));
- SDOperand Amt = Op.getOperand(1);
-
- SDOperand Tmp1 = DAG.getNode(ISD::SUB, MVT::i32,
- DAG.getConstant(32, MVT::i32), Amt);
- SDOperand Tmp2 = DAG.getNode(PPCISD::SRL, MVT::i32, Lo, Amt);
- SDOperand Tmp3 = DAG.getNode(PPCISD::SHL, MVT::i32, Hi, Tmp1);
- SDOperand Tmp4 = DAG.getNode(ISD::OR , MVT::i32, Tmp2, Tmp3);
- SDOperand Tmp5 = DAG.getNode(ISD::ADD, MVT::i32, Amt,
- DAG.getConstant(-32U, MVT::i32));
- SDOperand Tmp6 = DAG.getNode(PPCISD::SRL, MVT::i32, Hi, Tmp5);
- SDOperand OutLo = DAG.getNode(ISD::OR, MVT::i32, Tmp4, Tmp6);
- SDOperand OutHi = DAG.getNode(PPCISD::SRL, MVT::i32, Hi, Amt);
- return DAG.getNode(ISD::BUILD_PAIR, MVT::i64, OutLo, OutHi);
- }
- case ISD::SRA: {
- assert(Op.getValueType() == MVT::i64 &&
- Op.getOperand(1).getValueType() == MVT::i32 && "Unexpected SRA!");
- // The generic code does a fine job expanding shift by a constant.
- if (isa<ConstantSDNode>(Op.getOperand(1))) break;
-
- // Otherwise, expand into a bunch of logical ops, followed by a select_cc.
- SDOperand Lo = DAG.getNode(ISD::EXTRACT_ELEMENT, MVT::i32, Op.getOperand(0),
- DAG.getConstant(0, MVT::i32));
- SDOperand Hi = DAG.getNode(ISD::EXTRACT_ELEMENT, MVT::i32, Op.getOperand(0),
- DAG.getConstant(1, MVT::i32));
- SDOperand Amt = Op.getOperand(1);
-
- SDOperand Tmp1 = DAG.getNode(ISD::SUB, MVT::i32,
- DAG.getConstant(32, MVT::i32), Amt);
- SDOperand Tmp2 = DAG.getNode(PPCISD::SRL, MVT::i32, Lo, Amt);
- SDOperand Tmp3 = DAG.getNode(PPCISD::SHL, MVT::i32, Hi, Tmp1);
- SDOperand Tmp4 = DAG.getNode(ISD::OR , MVT::i32, Tmp2, Tmp3);
- SDOperand Tmp5 = DAG.getNode(ISD::ADD, MVT::i32, Amt,
- DAG.getConstant(-32U, MVT::i32));
- SDOperand Tmp6 = DAG.getNode(PPCISD::SRA, MVT::i32, Hi, Tmp5);
- SDOperand OutHi = DAG.getNode(PPCISD::SRA, MVT::i32, Hi, Amt);
- SDOperand OutLo = DAG.getSelectCC(Tmp5, DAG.getConstant(0, MVT::i32),
- Tmp4, Tmp6, ISD::SETLE);
- return DAG.getNode(ISD::BUILD_PAIR, MVT::i64, OutLo, OutHi);
- }
- case ISD::ConstantPool: {
- ConstantPoolSDNode *CP = cast<ConstantPoolSDNode>(Op);
- Constant *C = CP->get();
- SDOperand CPI = DAG.getTargetConstantPool(C, MVT::i32, CP->getAlignment());
- SDOperand Zero = DAG.getConstant(0, MVT::i32);
-
- if (getTargetMachine().getRelocationModel() == Reloc::Static) {
- // Generate non-pic code that has direct accesses to the constant pool.
- // The address of the global is just (hi(&g)+lo(&g)).
- SDOperand Hi = DAG.getNode(PPCISD::Hi, MVT::i32, CPI, Zero);
- SDOperand Lo = DAG.getNode(PPCISD::Lo, MVT::i32, CPI, Zero);
- return DAG.getNode(ISD::ADD, MVT::i32, Hi, Lo);
- }
-
- // Only lower ConstantPool on Darwin.
- if (!getTargetMachine().getSubtarget<PPCSubtarget>().isDarwin()) break;
- SDOperand Hi = DAG.getNode(PPCISD::Hi, MVT::i32, CPI, Zero);
- if (getTargetMachine().getRelocationModel() == Reloc::PIC) {
- // With PIC, the first instruction is actually "GR+hi(&G)".
- Hi = DAG.getNode(ISD::ADD, MVT::i32,
- DAG.getNode(PPCISD::GlobalBaseReg, MVT::i32), Hi);
- }
+ const TargetMachine &TM = DAG.getTarget();
+
+ SDOperand Hi = DAG.getNode(PPCISD::Hi, PtrVT, CPI, Zero);
+ SDOperand Lo = DAG.getNode(PPCISD::Lo, PtrVT, CPI, Zero);
- SDOperand Lo = DAG.getNode(PPCISD::Lo, MVT::i32, CPI, Zero);
- Lo = DAG.getNode(ISD::ADD, MVT::i32, Hi, Lo);
- return Lo;
- }
- case ISD::GlobalAddress: {
- GlobalAddressSDNode *GSDN = cast<GlobalAddressSDNode>(Op);
- GlobalValue *GV = GSDN->getGlobal();
- SDOperand GA = DAG.getTargetGlobalAddress(GV, MVT::i32, GSDN->getOffset());
- SDOperand Zero = DAG.getConstant(0, MVT::i32);
-
- if (getTargetMachine().getRelocationModel() == Reloc::Static) {
- // Generate non-pic code that has direct accesses to globals.
- // The address of the global is just (hi(&g)+lo(&g)).
- SDOperand Hi = DAG.getNode(PPCISD::Hi, MVT::i32, GA, Zero);
- SDOperand Lo = DAG.getNode(PPCISD::Lo, MVT::i32, GA, Zero);
- return DAG.getNode(ISD::ADD, MVT::i32, Hi, Lo);
- }
-
- // Only lower GlobalAddress on Darwin.
- if (!getTargetMachine().getSubtarget<PPCSubtarget>().isDarwin()) break;
-
- SDOperand Hi = DAG.getNode(PPCISD::Hi, MVT::i32, GA, Zero);
- if (getTargetMachine().getRelocationModel() == Reloc::PIC) {
- // With PIC, the first instruction is actually "GR+hi(&G)".
- Hi = DAG.getNode(ISD::ADD, MVT::i32,
- DAG.getNode(PPCISD::GlobalBaseReg, MVT::i32), Hi);
- }
-
- SDOperand Lo = DAG.getNode(PPCISD::Lo, MVT::i32, GA, Zero);
- Lo = DAG.getNode(ISD::ADD, MVT::i32, Hi, Lo);
-
- if (!GV->hasWeakLinkage() && !GV->hasLinkOnceLinkage() &&
- (!GV->isExternal() || GV->hasNotBeenReadFromBytecode()))
- return Lo;
-
- // If the global is weak or external, we have to go through the lazy
- // resolution stub.
- return DAG.getLoad(MVT::i32, DAG.getEntryNode(), Lo, DAG.getSrcValue(0));
+ // If this is a non-darwin platform, we don't support non-static relo models
+ // yet.
+ if (TM.getRelocationModel() == Reloc::Static ||
+ !TM.getSubtarget<PPCSubtarget>().isDarwin()) {
+ // Generate non-pic code that has direct accesses to the constant pool.
+ // The address of the global is just (hi(&g)+lo(&g)).
+ return DAG.getNode(ISD::ADD, PtrVT, Hi, Lo);
}
- case ISD::SETCC: {
- ISD::CondCode CC = cast<CondCodeSDNode>(Op.getOperand(2))->get();
-
- // If we're comparing for equality to zero, expose the fact that this is
- // implented as a ctlz/srl pair on ppc, so that the dag combiner can
- // fold the new nodes.
- if (ConstantSDNode *C = dyn_cast<ConstantSDNode>(Op.getOperand(1))) {
- if (C->isNullValue() && CC == ISD::SETEQ) {
- MVT::ValueType VT = Op.getOperand(0).getValueType();
- SDOperand Zext = Op.getOperand(0);
- if (VT < MVT::i32) {
- VT = MVT::i32;
- Zext = DAG.getNode(ISD::ZERO_EXTEND, VT, Op.getOperand(0));
- }
- unsigned Log2b = Log2_32(MVT::getSizeInBits(VT));
- SDOperand Clz = DAG.getNode(ISD::CTLZ, VT, Zext);
- SDOperand Scc = DAG.getNode(ISD::SRL, VT, Clz,
- DAG.getConstant(Log2b, getShiftAmountTy()));
- return DAG.getNode(ISD::TRUNCATE, getSetCCResultTy(), Scc);
- }
- // Leave comparisons against 0 and -1 alone for now, since they're usually
- // optimized. FIXME: revisit this when we can custom lower all setcc
- // optimizations.
- if (C->isAllOnesValue() || C->isNullValue())
- break;
- }
-
- // If we have an integer seteq/setne, turn it into a compare against zero
- // by subtracting the rhs from the lhs, which is faster than setting a
- // condition register, reading it back out, and masking the correct bit.
- MVT::ValueType LHSVT = Op.getOperand(0).getValueType();
- if (MVT::isInteger(LHSVT) && (CC == ISD::SETEQ || CC == ISD::SETNE)) {
- MVT::ValueType VT = Op.getValueType();
- SDOperand Sub = DAG.getNode(ISD::SUB, LHSVT, Op.getOperand(0),
- Op.getOperand(1));
- return DAG.getSetCC(VT, Sub, DAG.getConstant(0, LHSVT), CC);
- }
- break;
+
+ if (TM.getRelocationModel() == Reloc::PIC) {
+ // With PIC, the first instruction is actually "GR+hi(&G)".
+ Hi = DAG.getNode(ISD::ADD, PtrVT,
+ DAG.getNode(PPCISD::GlobalBaseReg, PtrVT), Hi);
}
- case ISD::VASTART: {
- // vastart just stores the address of the VarArgsFrameIndex slot into the
- // memory location argument.
- // FIXME: Replace MVT::i32 with PointerTy
- SDOperand FR = DAG.getFrameIndex(VarArgsFrameIndex, MVT::i32);
- return DAG.getNode(ISD::STORE, MVT::Other, Op.getOperand(0), FR,
- Op.getOperand(1), Op.getOperand(2));
+
+ Lo = DAG.getNode(ISD::ADD, PtrVT, Hi, Lo);
+ return Lo;
+}
+
+static SDOperand LowerJumpTable(SDOperand Op, SelectionDAG &DAG) {
+ MVT::ValueType PtrVT = Op.getValueType();
+ JumpTableSDNode *JT = cast<JumpTableSDNode>(Op);
+ SDOperand JTI = DAG.getTargetJumpTable(JT->getIndex(), PtrVT);
+ SDOperand Zero = DAG.getConstant(0, PtrVT);
+
+ const TargetMachine &TM = DAG.getTarget();
+
+ SDOperand Hi = DAG.getNode(PPCISD::Hi, PtrVT, JTI, Zero);
+ SDOperand Lo = DAG.getNode(PPCISD::Lo, PtrVT, JTI, Zero);
+
+ // If this is a non-darwin platform, we don't support non-static relo models
+ // yet.
+ if (TM.getRelocationModel() == Reloc::Static ||
+ !TM.getSubtarget<PPCSubtarget>().isDarwin()) {
+ // Generate non-pic code that has direct accesses to the constant pool.
+ // The address of the global is just (hi(&g)+lo(&g)).
+ return DAG.getNode(ISD::ADD, PtrVT, Hi, Lo);
}
- case ISD::RET: {
- SDOperand Copy;
-
- switch(Op.getNumOperands()) {
- default:
- assert(0 && "Do not know how to return this many arguments!");
- abort();
- case 1:
- return SDOperand(); // ret void is legal
- case 2: {
- MVT::ValueType ArgVT = Op.getOperand(1).getValueType();
- unsigned ArgReg = MVT::isInteger(ArgVT) ? PPC::R3 : PPC::F1;
- Copy = DAG.getCopyToReg(Op.getOperand(0), ArgReg, Op.getOperand(1),
- SDOperand());
- break;
- }
- case 3:
- Copy = DAG.getCopyToReg(Op.getOperand(0), PPC::R3, Op.getOperand(2),
- SDOperand());
- Copy = DAG.getCopyToReg(Copy, PPC::R4, Op.getOperand(1),Copy.getValue(1));
- break;
- }
- return DAG.getNode(PPCISD::RET_FLAG, MVT::Other, Copy, Copy.getValue(1));
+
+ if (TM.getRelocationModel() == Reloc::PIC) {
+ // With PIC, the first instruction is actually "GR+hi(&G)".
+ Hi = DAG.getNode(ISD::ADD, PtrVT,
+ DAG.getNode(PPCISD::GlobalBaseReg, MVT::i32), Hi);
}
- case ISD::SCALAR_TO_VECTOR: {
- // Create a stack slot that is 16-byte aligned.
- MachineFrameInfo *FrameInfo = DAG.getMachineFunction().getFrameInfo();
- int FrameIdx = FrameInfo->CreateStackObject(16, 16);
- SDOperand FIdx = DAG.getFrameIndex(FrameIdx, MVT::i32);
-
- // Store the input value into Value#0 of the stack slot.
- SDOperand Store = DAG.getNode(ISD::STORE, MVT::Other, DAG.getEntryNode(),
- Op.getOperand(0), FIdx,DAG.getSrcValue(NULL));
- // LVE_X it out.
- return DAG.getNode(PPCISD::LVE_X, Op.getValueType(), Store, FIdx,
- DAG.getSrcValue(NULL));
+
+ Lo = DAG.getNode(ISD::ADD, PtrVT, Hi, Lo);
+ return Lo;
+}
+
+static SDOperand LowerGlobalAddress(SDOperand Op, SelectionDAG &DAG) {
+ MVT::ValueType PtrVT = Op.getValueType();
+ GlobalAddressSDNode *GSDN = cast<GlobalAddressSDNode>(Op);
+ GlobalValue *GV = GSDN->getGlobal();
+ SDOperand GA = DAG.getTargetGlobalAddress(GV, PtrVT, GSDN->getOffset());
+ SDOperand Zero = DAG.getConstant(0, PtrVT);
+
+ const TargetMachine &TM = DAG.getTarget();
+
+ SDOperand Hi = DAG.getNode(PPCISD::Hi, PtrVT, GA, Zero);
+ SDOperand Lo = DAG.getNode(PPCISD::Lo, PtrVT, GA, Zero);
+
+ // If this is a non-darwin platform, we don't support non-static relo models
+ // yet.
+ if (TM.getRelocationModel() == Reloc::Static ||
+ !TM.getSubtarget<PPCSubtarget>().isDarwin()) {
+ // Generate non-pic code that has direct accesses to globals.
+ // The address of the global is just (hi(&g)+lo(&g)).
+ return DAG.getNode(ISD::ADD, PtrVT, Hi, Lo);
}
- case ISD::BUILD_VECTOR:
- // If this is a case we can't handle, return null and let the default
- // expansion code take care of it. If we CAN select this case, return Op.
-
- // See if this is all zeros.
- // FIXME: We should handle splat(-0.0), and other cases here.
- if (ISD::isBuildVectorAllZeros(Op.Val))
- return Op;
-
- if (PPC::isVecSplatImm(Op.Val, 1) || // vspltisb
- PPC::isVecSplatImm(Op.Val, 2) || // vspltish
- PPC::isVecSplatImm(Op.Val, 4)) // vspltisw
- return Op;
-
- return SDOperand();
-
- case ISD::VECTOR_SHUFFLE: {
- SDOperand V1 = Op.getOperand(0);
- SDOperand V2 = Op.getOperand(1);
- SDOperand PermMask = Op.getOperand(2);
-
- // Cases that are handled by instructions that take permute immediates
- // (such as vsplt*) should be left as VECTOR_SHUFFLE nodes so they can be
- // selected by the instruction selector.
- if (PPC::isSplatShuffleMask(PermMask.Val) && V2.getOpcode() == ISD::UNDEF)
- break;
-
- // TODO: Handle more cases, and also handle cases that are cheaper to do as
- // multiple such instructions than as a constant pool load/vperm pair.
-
- // Lower this to a VPERM(V1, V2, V3) expression, where V3 is a constant
- // vector that will get spilled to the constant pool.
- if (V2.getOpcode() == ISD::UNDEF) V2 = V1;
-
- // The SHUFFLE_VECTOR mask is almost exactly what we want for vperm, except
- // that it is in input element units, not in bytes. Convert now.
- MVT::ValueType EltVT = MVT::getVectorBaseType(V1.getValueType());
- unsigned BytesPerElement = MVT::getSizeInBits(EltVT)/8;
-
- std::vector<SDOperand> ResultMask;
- for (unsigned i = 0, e = PermMask.getNumOperands(); i != e; ++i) {
- unsigned SrcElt =cast<ConstantSDNode>(PermMask.getOperand(i))->getValue();
-
- for (unsigned j = 0; j != BytesPerElement; ++j)
- ResultMask.push_back(DAG.getConstant(SrcElt*BytesPerElement+j,
- MVT::i8));
- }
-
- SDOperand VPermMask =DAG.getNode(ISD::BUILD_VECTOR, MVT::v16i8, ResultMask);
- return DAG.getNode(PPCISD::VPERM, V1.getValueType(), V1, V2, VPermMask);
+
+ if (TM.getRelocationModel() == Reloc::PIC) {
+ // With PIC, the first instruction is actually "GR+hi(&G)".
+ Hi = DAG.getNode(ISD::ADD, PtrVT,
+ DAG.getNode(PPCISD::GlobalBaseReg, PtrVT), Hi);
}
- case ISD::INTRINSIC: {
- bool HasChain = Op.getOperand(0).getValueType() == MVT::Other;
- unsigned IntNo=cast<ConstantSDNode>(Op.getOperand(HasChain))->getValue();
-
- // If this is a lowered altivec predicate compare, CompareOpc is set to the
- // opcode number of the comparison.
- int CompareOpc = -1;
- switch (IntNo) {
- default: return SDOperand(); // Don't custom lower most intrinsics.
- case Intrinsic::ppc_altivec_vcmpbfp_p: CompareOpc = 966; break;
- case Intrinsic::ppc_altivec_vcmpeqfp_p: CompareOpc = 198; break;
- case Intrinsic::ppc_altivec_vcmpequb_p: CompareOpc = 6; break;
- case Intrinsic::ppc_altivec_vcmpequh_p: CompareOpc = 70; break;
- case Intrinsic::ppc_altivec_vcmpequw_p: CompareOpc = 134; break;
- case Intrinsic::ppc_altivec_vcmpgefp_p: CompareOpc = 454; break;
- case Intrinsic::ppc_altivec_vcmpgtfp_p: CompareOpc = 710; break;
- case Intrinsic::ppc_altivec_vcmpgtsb_p: CompareOpc = 774; break;
- case Intrinsic::ppc_altivec_vcmpgtsh_p: CompareOpc = 838; break;
- case Intrinsic::ppc_altivec_vcmpgtsw_p: CompareOpc = 902; break;
- case Intrinsic::ppc_altivec_vcmpgtub_p: CompareOpc = 518; break;
- case Intrinsic::ppc_altivec_vcmpgtuh_p: CompareOpc = 582; break;
- case Intrinsic::ppc_altivec_vcmpgtuw_p: CompareOpc = 646; break;
- }
-
- assert(CompareOpc>0 && "We only lower altivec predicate compares so far!");
+
+ Lo = DAG.getNode(ISD::ADD, PtrVT, Hi, Lo);
+
+ if (!GV->hasWeakLinkage() && !GV->hasLinkOnceLinkage() &&
+ (!GV->isExternal() || GV->hasNotBeenReadFromBytecode()))
+ return Lo;
+
+ // If the global is weak or external, we have to go through the lazy
+ // resolution stub.
+ return DAG.getLoad(PtrVT, DAG.getEntryNode(), Lo, DAG.getSrcValue(0));
+}
- // Create the PPCISD altivec 'dot' comparison node.
- std::vector<SDOperand> Ops;
- std::vector<MVT::ValueType> VTs;
- Ops.push_back(Op.getOperand(2)); // LHS
- Ops.push_back(Op.getOperand(3)); // RHS
- Ops.push_back(DAG.getConstant(CompareOpc, MVT::i32));
- VTs.push_back(Op.getOperand(2).getValueType());
- VTs.push_back(MVT::Flag);
- SDOperand CompNode = DAG.getNode(PPCISD::VCMPo, VTs, Ops);
-
- // Now that we have the comparison, emit a copy from the CR to a GPR.
- // This is flagged to the above dot comparison.
- SDOperand Flags = DAG.getNode(PPCISD::MFCR, MVT::i32,
- DAG.getRegister(PPC::CR6, MVT::i32),
- CompNode.getValue(1));
-
- // Unpack the result based on how the target uses it.
- unsigned BitNo; // Bit # of CR6.
- bool InvertBit; // Invert result?
- switch (cast<ConstantSDNode>(Op.getOperand(1))->getValue()) {
- default: // Can't happen, don't crash on invalid number though.
- case 0: // Return the value of the EQ bit of CR6.
- BitNo = 0; InvertBit = false;
- break;
- case 1: // Return the inverted value of the EQ bit of CR6.
- BitNo = 0; InvertBit = true;
- break;
- case 2: // Return the value of the LT bit of CR6.
- BitNo = 2; InvertBit = false;
- break;
- case 3: // Return the inverted value of the LT bit of CR6.
- BitNo = 2; InvertBit = true;
- break;
+static SDOperand LowerSETCC(SDOperand Op, SelectionDAG &DAG) {
+ ISD::CondCode CC = cast<CondCodeSDNode>(Op.getOperand(2))->get();
+
+ // If we're comparing for equality to zero, expose the fact that this is
+ // implented as a ctlz/srl pair on ppc, so that the dag combiner can
+ // fold the new nodes.
+ if (ConstantSDNode *C = dyn_cast<ConstantSDNode>(Op.getOperand(1))) {
+ if (C->isNullValue() && CC == ISD::SETEQ) {
+ MVT::ValueType VT = Op.getOperand(0).getValueType();
+ SDOperand Zext = Op.getOperand(0);
+ if (VT < MVT::i32) {
+ VT = MVT::i32;
+ Zext = DAG.getNode(ISD::ZERO_EXTEND, VT, Op.getOperand(0));
+ }
+ unsigned Log2b = Log2_32(MVT::getSizeInBits(VT));
+ SDOperand Clz = DAG.getNode(ISD::CTLZ, VT, Zext);
+ SDOperand Scc = DAG.getNode(ISD::SRL, VT, Clz,
+ DAG.getConstant(Log2b, MVT::i32));
+ return DAG.getNode(ISD::TRUNCATE, MVT::i32, Scc);
}
-
- // Shift the bit into the low position.
- Flags = DAG.getNode(ISD::SRL, MVT::i32, Flags,
- DAG.getConstant(8-(3-BitNo), MVT::i32));
- // Isolate the bit.
- Flags = DAG.getNode(ISD::AND, MVT::i32, Flags,
- DAG.getConstant(1, MVT::i32));
-
- // If we are supposed to, toggle the bit.
- if (InvertBit)
- Flags = DAG.getNode(ISD::XOR, MVT::i32, Flags,
- DAG.getConstant(1, MVT::i32));
- return Flags;
+ // Leave comparisons against 0 and -1 alone for now, since they're usually
+ // optimized. FIXME: revisit this when we can custom lower all setcc
+ // optimizations.
+ if (C->isAllOnesValue() || C->isNullValue())
+ return SDOperand();
}
+
+ // If we have an integer seteq/setne, turn it into a compare against zero
+ // by subtracting the rhs from the lhs, which is faster than setting a
+ // condition register, reading it back out, and masking the correct bit.
+ MVT::ValueType LHSVT = Op.getOperand(0).getValueType();
+ if (MVT::isInteger(LHSVT) && (CC == ISD::SETEQ || CC == ISD::SETNE)) {
+ MVT::ValueType VT = Op.getValueType();
+ SDOperand Sub = DAG.getNode(ISD::SUB, LHSVT, Op.getOperand(0),
+ Op.getOperand(1));
+ return DAG.getSetCC(VT, Sub, DAG.getConstant(0, LHSVT), CC);
}
return SDOperand();
}
-std::vector<SDOperand>
-PPCTargetLowering::LowerArguments(Function &F, SelectionDAG &DAG) {
- //
- // add beautiful description of PPC stack frame format, or at least some docs
+static SDOperand LowerVASTART(SDOperand Op, SelectionDAG &DAG,
+ unsigned VarArgsFrameIndex) {
+ // vastart just stores the address of the VarArgsFrameIndex slot into the
+ // memory location argument.
+ SDOperand FR = DAG.getFrameIndex(VarArgsFrameIndex, MVT::i32);
+ return DAG.getNode(ISD::STORE, MVT::Other, Op.getOperand(0), FR,
+ Op.getOperand(1), Op.getOperand(2));
+}
+
+static SDOperand LowerFORMAL_ARGUMENTS(SDOperand Op, SelectionDAG &DAG,
+ int &VarArgsFrameIndex) {
+ // TODO: add description of PPC stack frame format, or at least some docs.
//
MachineFunction &MF = DAG.getMachineFunction();
MachineFrameInfo *MFI = MF.getFrameInfo();
- MachineBasicBlock& BB = MF.front();
SSARegMap *RegMap = MF.getSSARegMap();
std::vector<SDOperand> ArgValues;
+ SDOperand Root = Op.getOperand(0);
unsigned ArgOffset = 24;
- unsigned GPR_remaining = 8;
- unsigned FPR_remaining = 13;
- unsigned GPR_idx = 0, FPR_idx = 0;
- static const unsigned GPR[] = {
+ const unsigned Num_GPR_Regs = 8;
+ const unsigned Num_FPR_Regs = 13;
+ const unsigned Num_VR_Regs = 12;
+ unsigned GPR_idx = 0, FPR_idx = 0, VR_idx = 0;
+
+ static const unsigned GPR_32[] = { // 32-bit registers.
PPC::R3, PPC::R4, PPC::R5, PPC::R6,
PPC::R7, PPC::R8, PPC::R9, PPC::R10,
};
+ static const unsigned GPR_64[] = { // 64-bit registers.
+ PPC::X3, PPC::X4, PPC::X5, PPC::X6,
+ PPC::X7, PPC::X8, PPC::X9, PPC::X10,
+ };
static const unsigned FPR[] = {
PPC::F1, PPC::F2, PPC::F3, PPC::F4, PPC::F5, PPC::F6, PPC::F7,
PPC::F8, PPC::F9, PPC::F10, PPC::F11, PPC::F12, PPC::F13
};
+ static const unsigned VR[] = {
+ PPC::V2, PPC::V3, PPC::V4, PPC::V5, PPC::V6, PPC::V7, PPC::V8,
+ PPC::V9, PPC::V10, PPC::V11, PPC::V12, PPC::V13
+ };
+
+ MVT::ValueType PtrVT = DAG.getTargetLoweringInfo().getPointerTy();
+ bool isPPC64 = PtrVT == MVT::i64;
+ const unsigned *GPR = isPPC64 ? GPR_64 : GPR_32;
- // Add DAG nodes to load the arguments... On entry to a function on PPC,
- // the arguments start at offset 24, although they are likely to be passed
- // in registers.
- for (Function::arg_iterator I = F.arg_begin(), E = F.arg_end(); I != E; ++I) {
- SDOperand newroot, argt;
- unsigned ObjSize;
+ // Add DAG nodes to load the arguments or copy them out of registers. On
+ // entry to a function on PPC, the arguments start at offset 24, although the
+ // first ones are often in registers.
+ for (unsigned ArgNo = 0, e = Op.Val->getNumValues()-1; ArgNo != e; ++ArgNo) {
+ SDOperand ArgVal;
bool needsLoad = false;
- bool ArgLive = !I->use_empty();
- MVT::ValueType ObjectVT = getValueType(I->getType());
-
+ MVT::ValueType ObjectVT = Op.getValue(ArgNo).getValueType();
+ unsigned ObjSize = MVT::getSizeInBits(ObjectVT)/8;
+
+ unsigned CurArgOffset = ArgOffset;
switch (ObjectVT) {
default: assert(0 && "Unhandled argument type!");
- case MVT::i1:
- case MVT::i8:
- case MVT::i16:
case MVT::i32:
- ObjSize = 4;
- if (!ArgLive) break;
- if (GPR_remaining > 0) {
+ // All int arguments reserve stack space.
+ ArgOffset += isPPC64 ? 8 : 4;
+
+ if (GPR_idx != Num_GPR_Regs) {
unsigned VReg = RegMap->createVirtualRegister(&PPC::GPRCRegClass);
MF.addLiveIn(GPR[GPR_idx], VReg);
- argt = newroot = DAG.getCopyFromReg(DAG.getRoot(), VReg, MVT::i32);
- if (ObjectVT != MVT::i32) {
- unsigned AssertOp = I->getType()->isSigned() ? ISD::AssertSext
- : ISD::AssertZext;
- argt = DAG.getNode(AssertOp, MVT::i32, argt,
- DAG.getValueType(ObjectVT));
- argt = DAG.getNode(ISD::TRUNCATE, ObjectVT, argt);
- }
+ ArgVal = DAG.getCopyFromReg(Root, VReg, MVT::i32);
+ ++GPR_idx;
} else {
needsLoad = true;
}
break;
- case MVT::i64:
- ObjSize = 8;
- if (!ArgLive) break;
- if (GPR_remaining > 0) {
- SDOperand argHi, argLo;
- unsigned VReg = RegMap->createVirtualRegister(&PPC::GPRCRegClass);
+ case MVT::i64: // PPC64
+ // All int arguments reserve stack space.
+ ArgOffset += 8;
+
+ if (GPR_idx != Num_GPR_Regs) {
+ unsigned VReg = RegMap->createVirtualRegister(&PPC::G8RCRegClass);
MF.addLiveIn(GPR[GPR_idx], VReg);
- argHi = DAG.getCopyFromReg(DAG.getRoot(), VReg, MVT::i32);
- // If we have two or more remaining argument registers, then both halves
- // of the i64 can be sourced from there. Otherwise, the lower half will
- // have to come off the stack. This can happen when an i64 is preceded
- // by 28 bytes of arguments.
- if (GPR_remaining > 1) {
- unsigned VReg = RegMap->createVirtualRegister(&PPC::GPRCRegClass);
- MF.addLiveIn(GPR[GPR_idx+1], VReg);
- argLo = DAG.getCopyFromReg(argHi, VReg, MVT::i32);
- } else {
- int FI = MFI->CreateFixedObject(4, ArgOffset+4);
- SDOperand FIN = DAG.getFrameIndex(FI, MVT::i32);
- argLo = DAG.getLoad(MVT::i32, DAG.getEntryNode(), FIN,
- DAG.getSrcValue(NULL));
- }
- // Build the outgoing arg thingy
- argt = DAG.getNode(ISD::BUILD_PAIR, MVT::i64, argLo, argHi);
- newroot = argLo;
+ ArgVal = DAG.getCopyFromReg(Root, VReg, MVT::i64);
+ ++GPR_idx;
} else {
needsLoad = true;
}
break;
case MVT::f32:
case MVT::f64:
- ObjSize = (ObjectVT == MVT::f64) ? 8 : 4;
- if (!ArgLive) {
- if (FPR_remaining > 0) {
- --FPR_remaining;
- ++FPR_idx;
- }
- break;
+ // All FP arguments reserve stack space.
+ ArgOffset += ObjSize;
+
+ // Every 4 bytes of argument space consumes one of the GPRs available for
+ // argument passing.
+ if (GPR_idx != Num_GPR_Regs) {
+ ++GPR_idx;
+ if (ObjSize == 8 && GPR_idx != Num_GPR_Regs)
+ ++GPR_idx;
}
- if (FPR_remaining > 0) {
+ if (FPR_idx != Num_FPR_Regs) {
unsigned VReg;
if (ObjectVT == MVT::f32)
VReg = RegMap->createVirtualRegister(&PPC::F4RCRegClass);
else
VReg = RegMap->createVirtualRegister(&PPC::F8RCRegClass);
MF.addLiveIn(FPR[FPR_idx], VReg);
- argt = newroot = DAG.getCopyFromReg(DAG.getRoot(), VReg, ObjectVT);
- --FPR_remaining;
+ ArgVal = DAG.getCopyFromReg(Root, VReg, ObjectVT);
++FPR_idx;
} else {
needsLoad = true;
}
break;
+ case MVT::v4f32:
+ case MVT::v4i32:
+ case MVT::v8i16:
+ case MVT::v16i8:
+ // Note that vector arguments in registers don't reserve stack space.
+ if (VR_idx != Num_VR_Regs) {
+ unsigned VReg = RegMap->createVirtualRegister(&PPC::VRRCRegClass);
+ MF.addLiveIn(VR[VR_idx], VReg);
+ ArgVal = DAG.getCopyFromReg(Root, VReg, ObjectVT);
+ ++VR_idx;
+ } else {
+ // This should be simple, but requires getting 16-byte aligned stack
+ // values.
+ assert(0 && "Loading VR argument not implemented yet!");
+ needsLoad = true;
+ }
+ break;
}
// We need to load the argument to a virtual register if we determined above
// that we ran out of physical registers of the appropriate type
if (needsLoad) {
- unsigned SubregOffset = 0;
- if (ObjectVT == MVT::i8 || ObjectVT == MVT::i1) SubregOffset = 3;
- if (ObjectVT == MVT::i16) SubregOffset = 2;
- int FI = MFI->CreateFixedObject(ObjSize, ArgOffset);
- SDOperand FIN = DAG.getFrameIndex(FI, MVT::i32);
- FIN = DAG.getNode(ISD::ADD, MVT::i32, FIN,
- DAG.getConstant(SubregOffset, MVT::i32));
- argt = newroot = DAG.getLoad(ObjectVT, DAG.getEntryNode(), FIN,
- DAG.getSrcValue(NULL));
- }
-
- // Every 4 bytes of argument space consumes one of the GPRs available for
- // argument passing.
- if (GPR_remaining > 0) {
- unsigned delta = (GPR_remaining > 1 && ObjSize == 8) ? 2 : 1;
- GPR_remaining -= delta;
- GPR_idx += delta;
+ // If the argument is actually used, emit a load from the right stack
+ // slot.
+ if (!Op.Val->hasNUsesOfValue(0, ArgNo)) {
+ int FI = MFI->CreateFixedObject(ObjSize, CurArgOffset);
+ SDOperand FIN = DAG.getFrameIndex(FI, PtrVT);
+ ArgVal = DAG.getLoad(ObjectVT, Root, FIN,
+ DAG.getSrcValue(NULL));
+ } else {
+ // Don't emit a dead load.
+ ArgVal = DAG.getNode(ISD::UNDEF, ObjectVT);
+ }
}
- ArgOffset += ObjSize;
- if (newroot.Val)
- DAG.setRoot(newroot.getValue(1));
- ArgValues.push_back(argt);
+ ArgValues.push_back(ArgVal);
}
// If the function takes variable number of arguments, make a frame index for
// the start of the first vararg value... for expansion of llvm.va_start.
- if (F.isVarArg()) {
- VarArgsFrameIndex = MFI->CreateFixedObject(4, ArgOffset);
- SDOperand FIN = DAG.getFrameIndex(VarArgsFrameIndex, MVT::i32);
+ bool isVarArg = cast<ConstantSDNode>(Op.getOperand(2))->getValue() != 0;
+ if (isVarArg) {
+ VarArgsFrameIndex = MFI->CreateFixedObject(MVT::getSizeInBits(PtrVT)/8,
+ ArgOffset);
+ SDOperand FIN = DAG.getFrameIndex(VarArgsFrameIndex, PtrVT);
// If this function is vararg, store any remaining integer argument regs
// to their spots on the stack so that they may be loaded by deferencing the
// result of va_next.
std::vector<SDOperand> MemOps;
- for (; GPR_remaining > 0; --GPR_remaining, ++GPR_idx) {
+ for (; GPR_idx != Num_GPR_Regs; ++GPR_idx) {
unsigned VReg = RegMap->createVirtualRegister(&PPC::GPRCRegClass);
MF.addLiveIn(GPR[GPR_idx], VReg);
- SDOperand Val = DAG.getCopyFromReg(DAG.getRoot(), VReg, MVT::i32);
+ SDOperand Val = DAG.getCopyFromReg(Root, VReg, PtrVT);
SDOperand Store = DAG.getNode(ISD::STORE, MVT::Other, Val.getValue(1),
Val, FIN, DAG.getSrcValue(NULL));
MemOps.push_back(Store);
// Increment the address by four for the next argument to store
- SDOperand PtrOff = DAG.getConstant(4, getPointerTy());
- FIN = DAG.getNode(ISD::ADD, MVT::i32, FIN, PtrOff);
- }
- if (!MemOps.empty()) {
- MemOps.push_back(DAG.getRoot());
- DAG.setRoot(DAG.getNode(ISD::TokenFactor, MVT::Other, MemOps));
+ SDOperand PtrOff = DAG.getConstant(MVT::getSizeInBits(PtrVT)/8, PtrVT);
+ FIN = DAG.getNode(ISD::ADD, PtrOff.getValueType(), FIN, PtrOff);
}
+ if (!MemOps.empty())
+ Root = DAG.getNode(ISD::TokenFactor, MVT::Other, MemOps);
}
- // Finally, inform the code generator which regs we return values in.
- switch (getValueType(F.getReturnType())) {
- default: assert(0 && "Unknown type!");
- case MVT::isVoid: break;
- case MVT::i1:
- case MVT::i8:
- case MVT::i16:
- case MVT::i32:
- MF.addLiveOut(PPC::R3);
- break;
- case MVT::i64:
- MF.addLiveOut(PPC::R3);
- MF.addLiveOut(PPC::R4);
- break;
- case MVT::f32:
- case MVT::f64:
- MF.addLiveOut(PPC::F1);
- break;
- }
+ ArgValues.push_back(Root);
+
+ // Return the new list of results.
+ std::vector<MVT::ValueType> RetVT(Op.Val->value_begin(),
+ Op.Val->value_end());
+ return DAG.getNode(ISD::MERGE_VALUES, RetVT, ArgValues);
+}
+
+/// isCallCompatibleAddress - Return the immediate to use if the specified
+/// 32-bit value is representable in the immediate field of a BxA instruction.
+static SDNode *isBLACompatibleAddress(SDOperand Op, SelectionDAG &DAG) {
+ ConstantSDNode *C = dyn_cast<ConstantSDNode>(Op);
+ if (!C) return 0;
- return ArgValues;
+ int Addr = C->getValue();
+ if ((Addr & 3) != 0 || // Low 2 bits are implicitly zero.
+ (Addr << 6 >> 6) != Addr)
+ return 0; // Top 6 bits have to be sext of immediate.
+
+ return DAG.getConstant((int)C->getValue() >> 2, MVT::i32).Val;
}
-std::pair<SDOperand, SDOperand>
-PPCTargetLowering::LowerCallTo(SDOperand Chain,
- const Type *RetTy, bool isVarArg,
- unsigned CallingConv, bool isTailCall,
- SDOperand Callee, ArgListTy &Args,
- SelectionDAG &DAG) {
+
+static SDOperand LowerCALL(SDOperand Op, SelectionDAG &DAG) {
+ SDOperand Chain = Op.getOperand(0);
+ unsigned CallingConv= cast<ConstantSDNode>(Op.getOperand(1))->getValue();
+ bool isVarArg = cast<ConstantSDNode>(Op.getOperand(2))->getValue() != 0;
+ bool isTailCall = cast<ConstantSDNode>(Op.getOperand(3))->getValue() != 0;
+ SDOperand Callee = Op.getOperand(4);
+ unsigned NumOps = (Op.getNumOperands() - 5) / 2;
+
+ MVT::ValueType PtrVT = DAG.getTargetLoweringInfo().getPointerTy();
+ bool isPPC64 = PtrVT == MVT::i64;
+ unsigned PtrByteSize = isPPC64 ? 8 : 4;
+
+
// args_to_use will accumulate outgoing args for the PPCISD::CALL case in
// SelectExpr to use to put the arguments in the appropriate registers.
std::vector<SDOperand> args_to_use;
// Count how many bytes are to be pushed on the stack, including the linkage
- // area, and parameter passing area.
- unsigned NumBytes = 24;
+ // area, and parameter passing area. We start with 24/48 bytes, which is
+ // prereserved space for [SP][CR][LR][3 x unused].
+ unsigned NumBytes = 6*PtrByteSize;
- if (Args.empty()) {
- Chain = DAG.getCALLSEQ_START(Chain,
- DAG.getConstant(NumBytes, getPointerTy()));
- } else {
- for (unsigned i = 0, e = Args.size(); i != e; ++i) {
- switch (getValueType(Args[i].second)) {
- default: assert(0 && "Unknown value type!");
- case MVT::i1:
- case MVT::i8:
- case MVT::i16:
- case MVT::i32:
- case MVT::f32:
- NumBytes += 4;
- break;
- case MVT::i64:
- case MVT::f64:
- NumBytes += 8;
- break;
- }
- }
-
- // Just to be safe, we'll always reserve the full 24 bytes of linkage area
- // plus 32 bytes of argument space in case any called code gets funky on us.
- // (Required by ABI to support var arg)
- if (NumBytes < 56) NumBytes = 56;
-
- // Adjust the stack pointer for the new arguments...
- // These operations are automatically eliminated by the prolog/epilog pass
- Chain = DAG.getCALLSEQ_START(Chain,
- DAG.getConstant(NumBytes, getPointerTy()));
-
- // Set up a copy of the stack pointer for use loading and storing any
- // arguments that may not fit in the registers available for argument
- // passing.
- SDOperand StackPtr = DAG.getRegister(PPC::R1, MVT::i32);
-
- // Figure out which arguments are going to go in registers, and which in
- // memory. Also, if this is a vararg function, floating point operations
- // must be stored to our stack, and loaded into integer regs as well, if
- // any integer regs are available for argument passing.
- unsigned ArgOffset = 24;
- unsigned GPR_remaining = 8;
- unsigned FPR_remaining = 13;
-
- std::vector<SDOperand> MemOps;
- for (unsigned i = 0, e = Args.size(); i != e; ++i) {
- // PtrOff will be used to store the current argument to the stack if a
- // register cannot be found for it.
- SDOperand PtrOff = DAG.getConstant(ArgOffset, getPointerTy());
- PtrOff = DAG.getNode(ISD::ADD, MVT::i32, StackPtr, PtrOff);
- MVT::ValueType ArgVT = getValueType(Args[i].second);
-
- switch (ArgVT) {
- default: assert(0 && "Unexpected ValueType for argument!");
- case MVT::i1:
- case MVT::i8:
- case MVT::i16:
- // Promote the integer to 32 bits. If the input type is signed use a
- // sign extend, otherwise use a zero extend.
- if (Args[i].second->isSigned())
- Args[i].first =DAG.getNode(ISD::SIGN_EXTEND, MVT::i32, Args[i].first);
- else
- Args[i].first =DAG.getNode(ISD::ZERO_EXTEND, MVT::i32, Args[i].first);
- // FALL THROUGH
- case MVT::i32:
- if (GPR_remaining > 0) {
- args_to_use.push_back(Args[i].first);
- --GPR_remaining;
- } else {
- MemOps.push_back(DAG.getNode(ISD::STORE, MVT::Other, Chain,
- Args[i].first, PtrOff,
- DAG.getSrcValue(NULL)));
- }
- ArgOffset += 4;
- break;
- case MVT::i64:
- // If we have one free GPR left, we can place the upper half of the i64
- // in it, and store the other half to the stack. If we have two or more
- // free GPRs, then we can pass both halves of the i64 in registers.
- if (GPR_remaining > 0) {
- SDOperand Hi = DAG.getNode(ISD::EXTRACT_ELEMENT, MVT::i32,
- Args[i].first, DAG.getConstant(1, MVT::i32));
- SDOperand Lo = DAG.getNode(ISD::EXTRACT_ELEMENT, MVT::i32,
- Args[i].first, DAG.getConstant(0, MVT::i32));
- args_to_use.push_back(Hi);
- --GPR_remaining;
- if (GPR_remaining > 0) {
- args_to_use.push_back(Lo);
- --GPR_remaining;
- } else {
- SDOperand ConstFour = DAG.getConstant(4, getPointerTy());
- PtrOff = DAG.getNode(ISD::ADD, MVT::i32, PtrOff, ConstFour);
- MemOps.push_back(DAG.getNode(ISD::STORE, MVT::Other, Chain,
- Lo, PtrOff, DAG.getSrcValue(NULL)));
+ // Add up all the space actually used.
+ for (unsigned i = 0; i != NumOps; ++i)
+ NumBytes += MVT::getSizeInBits(Op.getOperand(5+2*i).getValueType())/8;
+
+ // The prolog code of the callee may store up to 8 GPR argument registers to
+ // the stack, allowing va_start to index over them in memory if its varargs.
+ // Because we cannot tell if this is needed on the caller side, we have to
+ // conservatively assume that it is needed. As such, make sure we have at
+ // least enough stack space for the caller to store the 8 GPRs.
+ if (NumBytes < 6*PtrByteSize+8*PtrByteSize)
+ NumBytes = 6*PtrByteSize+8*PtrByteSize;
+
+ // Adjust the stack pointer for the new arguments...
+ // These operations are automatically eliminated by the prolog/epilog pass
+ Chain = DAG.getCALLSEQ_START(Chain,
+ DAG.getConstant(NumBytes, PtrVT));
+
+ // Set up a copy of the stack pointer for use loading and storing any
+ // arguments that may not fit in the registers available for argument
+ // passing.
+ SDOperand StackPtr;
+ if (isPPC64)
+ StackPtr = DAG.getRegister(PPC::X1, MVT::i64);
+ else
+ StackPtr = DAG.getRegister(PPC::R1, MVT::i32);
+
+ // Figure out which arguments are going to go in registers, and which in
+ // memory. Also, if this is a vararg function, floating point operations
+ // must be stored to our stack, and loaded into integer regs as well, if
+ // any integer regs are available for argument passing.
+ unsigned ArgOffset = 6*PtrByteSize;
+ unsigned GPR_idx = 0, FPR_idx = 0, VR_idx = 0;
+ static const unsigned GPR_32[] = { // 32-bit registers.
+ PPC::R3, PPC::R4, PPC::R5, PPC::R6,
+ PPC::R7, PPC::R8, PPC::R9, PPC::R10,
+ };
+ static const unsigned GPR_64[] = { // 64-bit registers.
+ PPC::X3, PPC::X4, PPC::X5, PPC::X6,
+ PPC::X7, PPC::X8, PPC::X9, PPC::X10,
+ };
+ static const unsigned FPR[] = {
+ PPC::F1, PPC::F2, PPC::F3, PPC::F4, PPC::F5, PPC::F6, PPC::F7,
+ PPC::F8, PPC::F9, PPC::F10, PPC::F11, PPC::F12, PPC::F13
+ };
+ static const unsigned VR[] = {
+ PPC::V2, PPC::V3, PPC::V4, PPC::V5, PPC::V6, PPC::V7, PPC::V8,
+ PPC::V9, PPC::V10, PPC::V11, PPC::V12, PPC::V13
+ };
+ const unsigned NumGPRs = sizeof(GPR_32)/sizeof(GPR_32[0]);
+ const unsigned NumFPRs = sizeof(FPR)/sizeof(FPR[0]);
+ const unsigned NumVRs = sizeof( VR)/sizeof( VR[0]);
+
+ const unsigned *GPR = isPPC64 ? GPR_64 : GPR_32;
+
+ std::vector<std::pair<unsigned, SDOperand> > RegsToPass;
+ std::vector<SDOperand> MemOpChains;
+ for (unsigned i = 0; i != NumOps; ++i) {
+ SDOperand Arg = Op.getOperand(5+2*i);
+
+ // PtrOff will be used to store the current argument to the stack if a
+ // register cannot be found for it.
+ SDOperand PtrOff = DAG.getConstant(ArgOffset, StackPtr.getValueType());
+ PtrOff = DAG.getNode(ISD::ADD, PtrVT, StackPtr, PtrOff);
+
+ // On PPC64, promote integers to 64-bit values.
+ if (isPPC64 && Arg.getValueType() == MVT::i32) {
+ unsigned ExtOp = ISD::ZERO_EXTEND;
+ if (cast<ConstantSDNode>(Op.getOperand(5+2*i+1))->getValue())
+ ExtOp = ISD::SIGN_EXTEND;
+ Arg = DAG.getNode(ExtOp, MVT::i64, Arg);
+ }
+
+ switch (Arg.getValueType()) {
+ default: assert(0 && "Unexpected ValueType for argument!");
+ case MVT::i32:
+ case MVT::i64:
+ if (GPR_idx != NumGPRs) {
+ RegsToPass.push_back(std::make_pair(GPR[GPR_idx++], Arg));
+ } else {
+ MemOpChains.push_back(DAG.getNode(ISD::STORE, MVT::Other, Chain,
+ Arg, PtrOff, DAG.getSrcValue(NULL)));
+ }
+ ArgOffset += PtrByteSize;
+ break;
+ case MVT::f32:
+ case MVT::f64:
+ if (FPR_idx != NumFPRs) {
+ RegsToPass.push_back(std::make_pair(FPR[FPR_idx++], Arg));
+
+ if (isVarArg) {
+ SDOperand Store = DAG.getNode(ISD::STORE, MVT::Other, Chain,
+ Arg, PtrOff,
+ DAG.getSrcValue(NULL));
+ MemOpChains.push_back(Store);
+
+ // Float varargs are always shadowed in available integer registers
+ if (GPR_idx != NumGPRs) {
+ SDOperand Load = DAG.getLoad(PtrVT, Store, PtrOff,
+ DAG.getSrcValue(NULL));
+ MemOpChains.push_back(Load.getValue(1));
+ RegsToPass.push_back(std::make_pair(GPR[GPR_idx++], Load));
+ }
+ if (GPR_idx != NumGPRs && Arg.getValueType() == MVT::f64) {
+ SDOperand ConstFour = DAG.getConstant(4, PtrOff.getValueType());
+ PtrOff = DAG.getNode(ISD::ADD, PtrVT, PtrOff, ConstFour);
+ SDOperand Load = DAG.getLoad(PtrVT, Store, PtrOff,
+ DAG.getSrcValue(NULL));
+ MemOpChains.push_back(Load.getValue(1));
+ RegsToPass.push_back(std::make_pair(GPR[GPR_idx++], Load));
}
} else {
- MemOps.push_back(DAG.getNode(ISD::STORE, MVT::Other, Chain,
- Args[i].first, PtrOff,
- DAG.getSrcValue(NULL)));
+ // If we have any FPRs remaining, we may also have GPRs remaining.
+ // Args passed in FPRs consume either 1 (f32) or 2 (f64) available
+ // GPRs.
+ if (GPR_idx != NumGPRs)
+ ++GPR_idx;
+ if (GPR_idx != NumGPRs && Arg.getValueType() == MVT::f64 && !isPPC64)
+ ++GPR_idx;
}
+ } else {
+ MemOpChains.push_back(DAG.getNode(ISD::STORE, MVT::Other, Chain,
+ Arg, PtrOff, DAG.getSrcValue(NULL)));
+ }
+ if (isPPC64)
ArgOffset += 8;
+ else
+ ArgOffset += Arg.getValueType() == MVT::f32 ? 4 : 8;
+ break;
+ case MVT::v4f32:
+ case MVT::v4i32:
+ case MVT::v8i16:
+ case MVT::v16i8:
+ assert(!isVarArg && "Don't support passing vectors to varargs yet!");
+ assert(VR_idx != NumVRs &&
+ "Don't support passing more than 12 vector args yet!");
+ RegsToPass.push_back(std::make_pair(VR[VR_idx++], Arg));
+ break;
+ }
+ }
+ if (!MemOpChains.empty())
+ Chain = DAG.getNode(ISD::TokenFactor, MVT::Other, MemOpChains);
+
+ // Build a sequence of copy-to-reg nodes chained together with token chain
+ // and flag operands which copy the outgoing args into the appropriate regs.
+ SDOperand InFlag;
+ for (unsigned i = 0, e = RegsToPass.size(); i != e; ++i) {
+ Chain = DAG.getCopyToReg(Chain, RegsToPass[i].first, RegsToPass[i].second,
+ InFlag);
+ InFlag = Chain.getValue(1);
+ }
+
+ std::vector<MVT::ValueType> NodeTys;
+ NodeTys.push_back(MVT::Other); // Returns a chain
+ NodeTys.push_back(MVT::Flag); // Returns a flag for retval copy to use.
+
+ std::vector<SDOperand> Ops;
+ unsigned CallOpc = PPCISD::CALL;
+
+ // If the callee is a GlobalAddress/ExternalSymbol node (quite common, every
+ // direct call is) turn it into a TargetGlobalAddress/TargetExternalSymbol
+ // node so that legalize doesn't hack it.
+ if (GlobalAddressSDNode *G = dyn_cast<GlobalAddressSDNode>(Callee))
+ Callee = DAG.getTargetGlobalAddress(G->getGlobal(), Callee.getValueType());
+ else if (ExternalSymbolSDNode *S = dyn_cast<ExternalSymbolSDNode>(Callee))
+ Callee = DAG.getTargetExternalSymbol(S->getSymbol(), Callee.getValueType());
+ else if (SDNode *Dest = isBLACompatibleAddress(Callee, DAG))
+ // If this is an absolute destination address, use the munged value.
+ Callee = SDOperand(Dest, 0);
+ else {
+ // Otherwise, this is an indirect call. We have to use a MTCTR/BCTRL pair
+ // to do the call, we can't use PPCISD::CALL.
+ Ops.push_back(Chain);
+ Ops.push_back(Callee);
+
+ if (InFlag.Val)
+ Ops.push_back(InFlag);
+ Chain = DAG.getNode(PPCISD::MTCTR, NodeTys, Ops);
+ InFlag = Chain.getValue(1);
+
+ // Copy the callee address into R12 on darwin.
+ Chain = DAG.getCopyToReg(Chain, PPC::R12, Callee, InFlag);
+ InFlag = Chain.getValue(1);
+
+ NodeTys.clear();
+ NodeTys.push_back(MVT::Other);
+ NodeTys.push_back(MVT::Flag);
+ Ops.clear();
+ Ops.push_back(Chain);
+ CallOpc = PPCISD::BCTRL;
+ Callee.Val = 0;
+ }
+
+ // If this is a direct call, pass the chain and the callee.
+ if (Callee.Val) {
+ Ops.push_back(Chain);
+ Ops.push_back(Callee);
+ }
+
+ // Add argument registers to the end of the list so that they are known live
+ // into the call.
+ for (unsigned i = 0, e = RegsToPass.size(); i != e; ++i)
+ Ops.push_back(DAG.getRegister(RegsToPass[i].first,
+ RegsToPass[i].second.getValueType()));
+
+ if (InFlag.Val)
+ Ops.push_back(InFlag);
+ Chain = DAG.getNode(CallOpc, NodeTys, Ops);
+ InFlag = Chain.getValue(1);
+
+ std::vector<SDOperand> ResultVals;
+ NodeTys.clear();
+
+ // If the call has results, copy the values out of the ret val registers.
+ switch (Op.Val->getValueType(0)) {
+ default: assert(0 && "Unexpected ret value!");
+ case MVT::Other: break;
+ case MVT::i32:
+ if (Op.Val->getValueType(1) == MVT::i32) {
+ Chain = DAG.getCopyFromReg(Chain, PPC::R4, MVT::i32, InFlag).getValue(1);
+ ResultVals.push_back(Chain.getValue(0));
+ Chain = DAG.getCopyFromReg(Chain, PPC::R3, MVT::i32,
+ Chain.getValue(2)).getValue(1);
+ ResultVals.push_back(Chain.getValue(0));
+ NodeTys.push_back(MVT::i32);
+ } else {
+ Chain = DAG.getCopyFromReg(Chain, PPC::R3, MVT::i32, InFlag).getValue(1);
+ ResultVals.push_back(Chain.getValue(0));
+ }
+ NodeTys.push_back(MVT::i32);
+ break;
+ case MVT::i64:
+ Chain = DAG.getCopyFromReg(Chain, PPC::X3, MVT::i64, InFlag).getValue(1);
+ ResultVals.push_back(Chain.getValue(0));
+ NodeTys.push_back(MVT::i64);
+ break;
+ case MVT::f32:
+ case MVT::f64:
+ Chain = DAG.getCopyFromReg(Chain, PPC::F1, Op.Val->getValueType(0),
+ InFlag).getValue(1);
+ ResultVals.push_back(Chain.getValue(0));
+ NodeTys.push_back(Op.Val->getValueType(0));
+ break;
+ case MVT::v4f32:
+ case MVT::v4i32:
+ case MVT::v8i16:
+ case MVT::v16i8:
+ Chain = DAG.getCopyFromReg(Chain, PPC::V2, Op.Val->getValueType(0),
+ InFlag).getValue(1);
+ ResultVals.push_back(Chain.getValue(0));
+ NodeTys.push_back(Op.Val->getValueType(0));
+ break;
+ }
+
+ Chain = DAG.getNode(ISD::CALLSEQ_END, MVT::Other, Chain,
+ DAG.getConstant(NumBytes, PtrVT));
+ NodeTys.push_back(MVT::Other);
+
+ // If the function returns void, just return the chain.
+ if (ResultVals.empty())
+ return Chain;
+
+ // Otherwise, merge everything together with a MERGE_VALUES node.
+ ResultVals.push_back(Chain);
+ SDOperand Res = DAG.getNode(ISD::MERGE_VALUES, NodeTys, ResultVals);
+ return Res.getValue(Op.ResNo);
+}
+
+static SDOperand LowerRET(SDOperand Op, SelectionDAG &DAG) {
+ SDOperand Copy;
+ switch(Op.getNumOperands()) {
+ default:
+ assert(0 && "Do not know how to return this many arguments!");
+ abort();
+ case 1:
+ return SDOperand(); // ret void is legal
+ case 3: {
+ MVT::ValueType ArgVT = Op.getOperand(1).getValueType();
+ unsigned ArgReg;
+ if (ArgVT == MVT::i32) {
+ ArgReg = PPC::R3;
+ } else if (ArgVT == MVT::i64) {
+ ArgReg = PPC::X3;
+ } else if (MVT::isFloatingPoint(ArgVT)) {
+ ArgReg = PPC::F1;
+ } else {
+ assert(MVT::isVector(ArgVT));
+ ArgReg = PPC::V2;
+ }
+
+ Copy = DAG.getCopyToReg(Op.getOperand(0), ArgReg, Op.getOperand(1),
+ SDOperand());
+
+ // If we haven't noted the R3/F1 are live out, do so now.
+ if (DAG.getMachineFunction().liveout_empty())
+ DAG.getMachineFunction().addLiveOut(ArgReg);
+ break;
+ }
+ case 5:
+ Copy = DAG.getCopyToReg(Op.getOperand(0), PPC::R3, Op.getOperand(3),
+ SDOperand());
+ Copy = DAG.getCopyToReg(Copy, PPC::R4, Op.getOperand(1),Copy.getValue(1));
+ // If we haven't noted the R3+R4 are live out, do so now.
+ if (DAG.getMachineFunction().liveout_empty()) {
+ DAG.getMachineFunction().addLiveOut(PPC::R3);
+ DAG.getMachineFunction().addLiveOut(PPC::R4);
+ }
+ break;
+ }
+ return DAG.getNode(PPCISD::RET_FLAG, MVT::Other, Copy, Copy.getValue(1));
+}
+
+/// LowerSELECT_CC - Lower floating point select_cc's into fsel instruction when
+/// possible.
+static SDOperand LowerSELECT_CC(SDOperand Op, SelectionDAG &DAG) {
+ // Not FP? Not a fsel.
+ if (!MVT::isFloatingPoint(Op.getOperand(0).getValueType()) ||
+ !MVT::isFloatingPoint(Op.getOperand(2).getValueType()))
+ return SDOperand();
+
+ ISD::CondCode CC = cast<CondCodeSDNode>(Op.getOperand(4))->get();
+
+ // Cannot handle SETEQ/SETNE.
+ if (CC == ISD::SETEQ || CC == ISD::SETNE) return SDOperand();
+
+ MVT::ValueType ResVT = Op.getValueType();
+ MVT::ValueType CmpVT = Op.getOperand(0).getValueType();
+ SDOperand LHS = Op.getOperand(0), RHS = Op.getOperand(1);
+ SDOperand TV = Op.getOperand(2), FV = Op.getOperand(3);
+
+ // If the RHS of the comparison is a 0.0, we don't need to do the
+ // subtraction at all.
+ if (isFloatingPointZero(RHS))
+ switch (CC) {
+ default: break; // SETUO etc aren't handled by fsel.
+ case ISD::SETULT:
+ case ISD::SETOLT:
+ case ISD::SETLT:
+ std::swap(TV, FV); // fsel is natively setge, swap operands for setlt
+ case ISD::SETUGE:
+ case ISD::SETOGE:
+ case ISD::SETGE:
+ if (LHS.getValueType() == MVT::f32) // Comparison is always 64-bits
+ LHS = DAG.getNode(ISD::FP_EXTEND, MVT::f64, LHS);
+ return DAG.getNode(PPCISD::FSEL, ResVT, LHS, TV, FV);
+ case ISD::SETUGT:
+ case ISD::SETOGT:
+ case ISD::SETGT:
+ std::swap(TV, FV); // fsel is natively setge, swap operands for setlt
+ case ISD::SETULE:
+ case ISD::SETOLE:
+ case ISD::SETLE:
+ if (LHS.getValueType() == MVT::f32) // Comparison is always 64-bits
+ LHS = DAG.getNode(ISD::FP_EXTEND, MVT::f64, LHS);
+ return DAG.getNode(PPCISD::FSEL, ResVT,
+ DAG.getNode(ISD::FNEG, MVT::f64, LHS), TV, FV);
+ }
+
+ SDOperand Cmp;
+ switch (CC) {
+ default: break; // SETUO etc aren't handled by fsel.
+ case ISD::SETULT:
+ case ISD::SETOLT:
+ case ISD::SETLT:
+ Cmp = DAG.getNode(ISD::FSUB, CmpVT, LHS, RHS);
+ if (Cmp.getValueType() == MVT::f32) // Comparison is always 64-bits
+ Cmp = DAG.getNode(ISD::FP_EXTEND, MVT::f64, Cmp);
+ return DAG.getNode(PPCISD::FSEL, ResVT, Cmp, FV, TV);
+ case ISD::SETUGE:
+ case ISD::SETOGE:
+ case ISD::SETGE:
+ Cmp = DAG.getNode(ISD::FSUB, CmpVT, LHS, RHS);
+ if (Cmp.getValueType() == MVT::f32) // Comparison is always 64-bits
+ Cmp = DAG.getNode(ISD::FP_EXTEND, MVT::f64, Cmp);
+ return DAG.getNode(PPCISD::FSEL, ResVT, Cmp, TV, FV);
+ case ISD::SETUGT:
+ case ISD::SETOGT:
+ case ISD::SETGT:
+ Cmp = DAG.getNode(ISD::FSUB, CmpVT, RHS, LHS);
+ if (Cmp.getValueType() == MVT::f32) // Comparison is always 64-bits
+ Cmp = DAG.getNode(ISD::FP_EXTEND, MVT::f64, Cmp);
+ return DAG.getNode(PPCISD::FSEL, ResVT, Cmp, FV, TV);
+ case ISD::SETULE:
+ case ISD::SETOLE:
+ case ISD::SETLE:
+ Cmp = DAG.getNode(ISD::FSUB, CmpVT, RHS, LHS);
+ if (Cmp.getValueType() == MVT::f32) // Comparison is always 64-bits
+ Cmp = DAG.getNode(ISD::FP_EXTEND, MVT::f64, Cmp);
+ return DAG.getNode(PPCISD::FSEL, ResVT, Cmp, TV, FV);
+ }
+ return SDOperand();
+}
+
+static SDOperand LowerFP_TO_SINT(SDOperand Op, SelectionDAG &DAG) {
+ assert(MVT::isFloatingPoint(Op.getOperand(0).getValueType()));
+ SDOperand Src = Op.getOperand(0);
+ if (Src.getValueType() == MVT::f32)
+ Src = DAG.getNode(ISD::FP_EXTEND, MVT::f64, Src);
+
+ SDOperand Tmp;
+ switch (Op.getValueType()) {
+ default: assert(0 && "Unhandled FP_TO_SINT type in custom expander!");
+ case MVT::i32:
+ Tmp = DAG.getNode(PPCISD::FCTIWZ, MVT::f64, Src);
+ break;
+ case MVT::i64:
+ Tmp = DAG.getNode(PPCISD::FCTIDZ, MVT::f64, Src);
+ break;
+ }
+
+ // Convert the FP value to an int value through memory.
+ SDOperand Bits = DAG.getNode(ISD::BIT_CONVERT, MVT::i64, Tmp);
+ if (Op.getValueType() == MVT::i32)
+ Bits = DAG.getNode(ISD::TRUNCATE, MVT::i32, Bits);
+ return Bits;
+}
+
+static SDOperand LowerSINT_TO_FP(SDOperand Op, SelectionDAG &DAG) {
+ if (Op.getOperand(0).getValueType() == MVT::i64) {
+ SDOperand Bits = DAG.getNode(ISD::BIT_CONVERT, MVT::f64, Op.getOperand(0));
+ SDOperand FP = DAG.getNode(PPCISD::FCFID, MVT::f64, Bits);
+ if (Op.getValueType() == MVT::f32)
+ FP = DAG.getNode(ISD::FP_ROUND, MVT::f32, FP);
+ return FP;
+ }
+
+ assert(Op.getOperand(0).getValueType() == MVT::i32 &&
+ "Unhandled SINT_TO_FP type in custom expander!");
+ // Since we only generate this in 64-bit mode, we can take advantage of
+ // 64-bit registers. In particular, sign extend the input value into the
+ // 64-bit register with extsw, store the WHOLE 64-bit value into the stack
+ // then lfd it and fcfid it.
+ MachineFrameInfo *FrameInfo = DAG.getMachineFunction().getFrameInfo();
+ int FrameIdx = FrameInfo->CreateStackObject(8, 8);
+ SDOperand FIdx = DAG.getFrameIndex(FrameIdx, MVT::i32);
+
+ SDOperand Ext64 = DAG.getNode(PPCISD::EXTSW_32, MVT::i32,
+ Op.getOperand(0));
+
+ // STD the extended value into the stack slot.
+ SDOperand Store = DAG.getNode(PPCISD::STD_32, MVT::Other,
+ DAG.getEntryNode(), Ext64, FIdx,
+ DAG.getSrcValue(NULL));
+ // Load the value as a double.
+ SDOperand Ld = DAG.getLoad(MVT::f64, Store, FIdx, DAG.getSrcValue(NULL));
+
+ // FCFID it and return it.
+ SDOperand FP = DAG.getNode(PPCISD::FCFID, MVT::f64, Ld);
+ if (Op.getValueType() == MVT::f32)
+ FP = DAG.getNode(ISD::FP_ROUND, MVT::f32, FP);
+ return FP;
+}
+
+static SDOperand LowerSHL(SDOperand Op, SelectionDAG &DAG,
+ MVT::ValueType PtrVT) {
+ assert(Op.getValueType() == MVT::i64 &&
+ Op.getOperand(1).getValueType() == MVT::i32 && "Unexpected SHL!");
+ // The generic code does a fine job expanding shift by a constant.
+ if (isa<ConstantSDNode>(Op.getOperand(1))) return SDOperand();
+
+ // Otherwise, expand into a bunch of logical ops. Note that these ops
+ // depend on the PPC behavior for oversized shift amounts.
+ SDOperand Lo = DAG.getNode(ISD::EXTRACT_ELEMENT, MVT::i32, Op.getOperand(0),
+ DAG.getConstant(0, PtrVT));
+ SDOperand Hi = DAG.getNode(ISD::EXTRACT_ELEMENT, MVT::i32, Op.getOperand(0),
+ DAG.getConstant(1, PtrVT));
+ SDOperand Amt = Op.getOperand(1);
+
+ SDOperand Tmp1 = DAG.getNode(ISD::SUB, MVT::i32,
+ DAG.getConstant(32, MVT::i32), Amt);
+ SDOperand Tmp2 = DAG.getNode(PPCISD::SHL, MVT::i32, Hi, Amt);
+ SDOperand Tmp3 = DAG.getNode(PPCISD::SRL, MVT::i32, Lo, Tmp1);
+ SDOperand Tmp4 = DAG.getNode(ISD::OR , MVT::i32, Tmp2, Tmp3);
+ SDOperand Tmp5 = DAG.getNode(ISD::ADD, MVT::i32, Amt,
+ DAG.getConstant(-32U, MVT::i32));
+ SDOperand Tmp6 = DAG.getNode(PPCISD::SHL, MVT::i32, Lo, Tmp5);
+ SDOperand OutHi = DAG.getNode(ISD::OR, MVT::i32, Tmp4, Tmp6);
+ SDOperand OutLo = DAG.getNode(PPCISD::SHL, MVT::i32, Lo, Amt);
+ return DAG.getNode(ISD::BUILD_PAIR, MVT::i64, OutLo, OutHi);
+}
+
+static SDOperand LowerSRL(SDOperand Op, SelectionDAG &DAG,
+ MVT::ValueType PtrVT) {
+ assert(Op.getValueType() == MVT::i64 &&
+ Op.getOperand(1).getValueType() == MVT::i32 && "Unexpected SHL!");
+ // The generic code does a fine job expanding shift by a constant.
+ if (isa<ConstantSDNode>(Op.getOperand(1))) return SDOperand();
+
+ // Otherwise, expand into a bunch of logical ops. Note that these ops
+ // depend on the PPC behavior for oversized shift amounts.
+ SDOperand Lo = DAG.getNode(ISD::EXTRACT_ELEMENT, MVT::i32, Op.getOperand(0),
+ DAG.getConstant(0, PtrVT));
+ SDOperand Hi = DAG.getNode(ISD::EXTRACT_ELEMENT, MVT::i32, Op.getOperand(0),
+ DAG.getConstant(1, PtrVT));
+ SDOperand Amt = Op.getOperand(1);
+
+ SDOperand Tmp1 = DAG.getNode(ISD::SUB, MVT::i32,
+ DAG.getConstant(32, MVT::i32), Amt);
+ SDOperand Tmp2 = DAG.getNode(PPCISD::SRL, MVT::i32, Lo, Amt);
+ SDOperand Tmp3 = DAG.getNode(PPCISD::SHL, MVT::i32, Hi, Tmp1);
+ SDOperand Tmp4 = DAG.getNode(ISD::OR , MVT::i32, Tmp2, Tmp3);
+ SDOperand Tmp5 = DAG.getNode(ISD::ADD, MVT::i32, Amt,
+ DAG.getConstant(-32U, MVT::i32));
+ SDOperand Tmp6 = DAG.getNode(PPCISD::SRL, MVT::i32, Hi, Tmp5);
+ SDOperand OutLo = DAG.getNode(ISD::OR, MVT::i32, Tmp4, Tmp6);
+ SDOperand OutHi = DAG.getNode(PPCISD::SRL, MVT::i32, Hi, Amt);
+ return DAG.getNode(ISD::BUILD_PAIR, MVT::i64, OutLo, OutHi);
+}
+
+static SDOperand LowerSRA(SDOperand Op, SelectionDAG &DAG,
+ MVT::ValueType PtrVT) {
+ assert(Op.getValueType() == MVT::i64 &&
+ Op.getOperand(1).getValueType() == MVT::i32 && "Unexpected SRA!");
+ // The generic code does a fine job expanding shift by a constant.
+ if (isa<ConstantSDNode>(Op.getOperand(1))) return SDOperand();
+
+ // Otherwise, expand into a bunch of logical ops, followed by a select_cc.
+ SDOperand Lo = DAG.getNode(ISD::EXTRACT_ELEMENT, MVT::i32, Op.getOperand(0),
+ DAG.getConstant(0, PtrVT));
+ SDOperand Hi = DAG.getNode(ISD::EXTRACT_ELEMENT, MVT::i32, Op.getOperand(0),
+ DAG.getConstant(1, PtrVT));
+ SDOperand Amt = Op.getOperand(1);
+
+ SDOperand Tmp1 = DAG.getNode(ISD::SUB, MVT::i32,
+ DAG.getConstant(32, MVT::i32), Amt);
+ SDOperand Tmp2 = DAG.getNode(PPCISD::SRL, MVT::i32, Lo, Amt);
+ SDOperand Tmp3 = DAG.getNode(PPCISD::SHL, MVT::i32, Hi, Tmp1);
+ SDOperand Tmp4 = DAG.getNode(ISD::OR , MVT::i32, Tmp2, Tmp3);
+ SDOperand Tmp5 = DAG.getNode(ISD::ADD, MVT::i32, Amt,
+ DAG.getConstant(-32U, MVT::i32));
+ SDOperand Tmp6 = DAG.getNode(PPCISD::SRA, MVT::i32, Hi, Tmp5);
+ SDOperand OutHi = DAG.getNode(PPCISD::SRA, MVT::i32, Hi, Amt);
+ SDOperand OutLo = DAG.getSelectCC(Tmp5, DAG.getConstant(0, MVT::i32),
+ Tmp4, Tmp6, ISD::SETLE);
+ return DAG.getNode(ISD::BUILD_PAIR, MVT::i64, OutLo, OutHi);
+}
+
+//===----------------------------------------------------------------------===//
+// Vector related lowering.
+//
+
+// If this is a vector of constants or undefs, get the bits. A bit in
+// UndefBits is set if the corresponding element of the vector is an
+// ISD::UNDEF value. For undefs, the corresponding VectorBits values are
+// zero. Return true if this is not an array of constants, false if it is.
+//
+static bool GetConstantBuildVectorBits(SDNode *BV, uint64_t VectorBits[2],
+ uint64_t UndefBits[2]) {
+ // Start with zero'd results.
+ VectorBits[0] = VectorBits[1] = UndefBits[0] = UndefBits[1] = 0;
+
+ unsigned EltBitSize = MVT::getSizeInBits(BV->getOperand(0).getValueType());
+ for (unsigned i = 0, e = BV->getNumOperands(); i != e; ++i) {
+ SDOperand OpVal = BV->getOperand(i);
+
+ unsigned PartNo = i >= e/2; // In the upper 128 bits?
+ unsigned SlotNo = e/2 - (i & (e/2-1))-1; // Which subpiece of the uint64_t.
+
+ uint64_t EltBits = 0;
+ if (OpVal.getOpcode() == ISD::UNDEF) {
+ uint64_t EltUndefBits = ~0U >> (32-EltBitSize);
+ UndefBits[PartNo] |= EltUndefBits << (SlotNo*EltBitSize);
+ continue;
+ } else if (ConstantSDNode *CN = dyn_cast<ConstantSDNode>(OpVal)) {
+ EltBits = CN->getValue() & (~0U >> (32-EltBitSize));
+ } else if (ConstantFPSDNode *CN = dyn_cast<ConstantFPSDNode>(OpVal)) {
+ assert(CN->getValueType(0) == MVT::f32 &&
+ "Only one legal FP vector type!");
+ EltBits = FloatToBits(CN->getValue());
+ } else {
+ // Nonconstant element.
+ return true;
+ }
+
+ VectorBits[PartNo] |= EltBits << (SlotNo*EltBitSize);
+ }
+
+ //printf("%llx %llx %llx %llx\n",
+ // VectorBits[0], VectorBits[1], UndefBits[0], UndefBits[1]);
+ return false;
+}
+
+// If this is a splat (repetition) of a value across the whole vector, return
+// the smallest size that splats it. For example, "0x01010101010101..." is a
+// splat of 0x01, 0x0101, and 0x01010101. We return SplatBits = 0x01 and
+// SplatSize = 1 byte.
+static bool isConstantSplat(const uint64_t Bits128[2],
+ const uint64_t Undef128[2],
+ unsigned &SplatBits, unsigned &SplatUndef,
+ unsigned &SplatSize) {
+
+ // Don't let undefs prevent splats from matching. See if the top 64-bits are
+ // the same as the lower 64-bits, ignoring undefs.
+ if ((Bits128[0] & ~Undef128[1]) != (Bits128[1] & ~Undef128[0]))
+ return false; // Can't be a splat if two pieces don't match.
+
+ uint64_t Bits64 = Bits128[0] | Bits128[1];
+ uint64_t Undef64 = Undef128[0] & Undef128[1];
+
+ // Check that the top 32-bits are the same as the lower 32-bits, ignoring
+ // undefs.
+ if ((Bits64 & (~Undef64 >> 32)) != ((Bits64 >> 32) & ~Undef64))
+ return false; // Can't be a splat if two pieces don't match.
+
+ uint32_t Bits32 = uint32_t(Bits64) | uint32_t(Bits64 >> 32);
+ uint32_t Undef32 = uint32_t(Undef64) & uint32_t(Undef64 >> 32);
+
+ // If the top 16-bits are different than the lower 16-bits, ignoring
+ // undefs, we have an i32 splat.
+ if ((Bits32 & (~Undef32 >> 16)) != ((Bits32 >> 16) & ~Undef32)) {
+ SplatBits = Bits32;
+ SplatUndef = Undef32;
+ SplatSize = 4;
+ return true;
+ }
+
+ uint16_t Bits16 = uint16_t(Bits32) | uint16_t(Bits32 >> 16);
+ uint16_t Undef16 = uint16_t(Undef32) & uint16_t(Undef32 >> 16);
+
+ // If the top 8-bits are different than the lower 8-bits, ignoring
+ // undefs, we have an i16 splat.
+ if ((Bits16 & (uint16_t(~Undef16) >> 8)) != ((Bits16 >> 8) & ~Undef16)) {
+ SplatBits = Bits16;
+ SplatUndef = Undef16;
+ SplatSize = 2;
+ return true;
+ }
+
+ // Otherwise, we have an 8-bit splat.
+ SplatBits = uint8_t(Bits16) | uint8_t(Bits16 >> 8);
+ SplatUndef = uint8_t(Undef16) & uint8_t(Undef16 >> 8);
+ SplatSize = 1;
+ return true;
+}
+
+/// BuildSplatI - Build a canonical splati of Val with an element size of
+/// SplatSize. Cast the result to VT.
+static SDOperand BuildSplatI(int Val, unsigned SplatSize, MVT::ValueType VT,
+ SelectionDAG &DAG) {
+ assert(Val >= -16 && Val <= 15 && "vsplti is out of range!");
+
+ // Force vspltis[hw] -1 to vspltisb -1.
+ if (Val == -1) SplatSize = 1;
+
+ static const MVT::ValueType VTys[] = { // canonical VT to use for each size.
+ MVT::v16i8, MVT::v8i16, MVT::Other, MVT::v4i32
+ };
+ MVT::ValueType CanonicalVT = VTys[SplatSize-1];
+
+ // Build a canonical splat for this value.
+ SDOperand Elt = DAG.getConstant(Val, MVT::getVectorBaseType(CanonicalVT));
+ std::vector<SDOperand> Ops(MVT::getVectorNumElements(CanonicalVT), Elt);
+ SDOperand Res = DAG.getNode(ISD::BUILD_VECTOR, CanonicalVT, Ops);
+ return DAG.getNode(ISD::BIT_CONVERT, VT, Res);
+}
+
+/// BuildIntrinsicOp - Return a binary operator intrinsic node with the
+/// specified intrinsic ID.
+static SDOperand BuildIntrinsicOp(unsigned IID, SDOperand LHS, SDOperand RHS,
+ SelectionDAG &DAG,
+ MVT::ValueType DestVT = MVT::Other) {
+ if (DestVT == MVT::Other) DestVT = LHS.getValueType();
+ return DAG.getNode(ISD::INTRINSIC_WO_CHAIN, DestVT,
+ DAG.getConstant(IID, MVT::i32), LHS, RHS);
+}
+
+/// BuildIntrinsicOp - Return a ternary operator intrinsic node with the
+/// specified intrinsic ID.
+static SDOperand BuildIntrinsicOp(unsigned IID, SDOperand Op0, SDOperand Op1,
+ SDOperand Op2, SelectionDAG &DAG,
+ MVT::ValueType DestVT = MVT::Other) {
+ if (DestVT == MVT::Other) DestVT = Op0.getValueType();
+ return DAG.getNode(ISD::INTRINSIC_WO_CHAIN, DestVT,
+ DAG.getConstant(IID, MVT::i32), Op0, Op1, Op2);
+}
+
+
+/// BuildVSLDOI - Return a VECTOR_SHUFFLE that is a vsldoi of the specified
+/// amount. The result has the specified value type.
+static SDOperand BuildVSLDOI(SDOperand LHS, SDOperand RHS, unsigned Amt,
+ MVT::ValueType VT, SelectionDAG &DAG) {
+ // Force LHS/RHS to be the right type.
+ LHS = DAG.getNode(ISD::BIT_CONVERT, MVT::v16i8, LHS);
+ RHS = DAG.getNode(ISD::BIT_CONVERT, MVT::v16i8, RHS);
+
+ std::vector<SDOperand> Ops;
+ for (unsigned i = 0; i != 16; ++i)
+ Ops.push_back(DAG.getConstant(i+Amt, MVT::i32));
+ SDOperand T = DAG.getNode(ISD::VECTOR_SHUFFLE, MVT::v16i8, LHS, RHS,
+ DAG.getNode(ISD::BUILD_VECTOR, MVT::v16i8, Ops));
+ return DAG.getNode(ISD::BIT_CONVERT, VT, T);
+}
+
+// If this is a case we can't handle, return null and let the default
+// expansion code take care of it. If we CAN select this case, and if it
+// selects to a single instruction, return Op. Otherwise, if we can codegen
+// this case more efficiently than a constant pool load, lower it to the
+// sequence of ops that should be used.
+static SDOperand LowerBUILD_VECTOR(SDOperand Op, SelectionDAG &DAG) {
+ // If this is a vector of constants or undefs, get the bits. A bit in
+ // UndefBits is set if the corresponding element of the vector is an
+ // ISD::UNDEF value. For undefs, the corresponding VectorBits values are
+ // zero.
+ uint64_t VectorBits[2];
+ uint64_t UndefBits[2];
+ if (GetConstantBuildVectorBits(Op.Val, VectorBits, UndefBits))
+ return SDOperand(); // Not a constant vector.
+
+ // If this is a splat (repetition) of a value across the whole vector, return
+ // the smallest size that splats it. For example, "0x01010101010101..." is a
+ // splat of 0x01, 0x0101, and 0x01010101. We return SplatBits = 0x01 and
+ // SplatSize = 1 byte.
+ unsigned SplatBits, SplatUndef, SplatSize;
+ if (isConstantSplat(VectorBits, UndefBits, SplatBits, SplatUndef, SplatSize)){
+ bool HasAnyUndefs = (UndefBits[0] | UndefBits[1]) != 0;
+
+ // First, handle single instruction cases.
+
+ // All zeros?
+ if (SplatBits == 0) {
+ // Canonicalize all zero vectors to be v4i32.
+ if (Op.getValueType() != MVT::v4i32 || HasAnyUndefs) {
+ SDOperand Z = DAG.getConstant(0, MVT::i32);
+ Z = DAG.getNode(ISD::BUILD_VECTOR, MVT::v4i32, Z, Z, Z, Z);
+ Op = DAG.getNode(ISD::BIT_CONVERT, Op.getValueType(), Z);
+ }
+ return Op;
+ }
+
+ // If the sign extended value is in the range [-16,15], use VSPLTI[bhw].
+ int32_t SextVal= int32_t(SplatBits << (32-8*SplatSize)) >> (32-8*SplatSize);
+ if (SextVal >= -16 && SextVal <= 15)
+ return BuildSplatI(SextVal, SplatSize, Op.getValueType(), DAG);
+
+
+ // Two instruction sequences.
+
+ // If this value is in the range [-32,30] and is even, use:
+ // tmp = VSPLTI[bhw], result = add tmp, tmp
+ if (SextVal >= -32 && SextVal <= 30 && (SextVal & 1) == 0) {
+ Op = BuildSplatI(SextVal >> 1, SplatSize, Op.getValueType(), DAG);
+ return DAG.getNode(ISD::ADD, Op.getValueType(), Op, Op);
+ }
+
+ // If this is 0x8000_0000 x 4, turn into vspltisw + vslw. If it is
+ // 0x7FFF_FFFF x 4, turn it into not(0x8000_0000). This is important
+ // for fneg/fabs.
+ if (SplatSize == 4 && SplatBits == (0x7FFFFFFF&~SplatUndef)) {
+ // Make -1 and vspltisw -1:
+ SDOperand OnesV = BuildSplatI(-1, 4, MVT::v4i32, DAG);
+
+ // Make the VSLW intrinsic, computing 0x8000_0000.
+ SDOperand Res = BuildIntrinsicOp(Intrinsic::ppc_altivec_vslw, OnesV,
+ OnesV, DAG);
+
+ // xor by OnesV to invert it.
+ Res = DAG.getNode(ISD::XOR, MVT::v4i32, Res, OnesV);
+ return DAG.getNode(ISD::BIT_CONVERT, Op.getValueType(), Res);
+ }
+
+ // Check to see if this is a wide variety of vsplti*, binop self cases.
+ unsigned SplatBitSize = SplatSize*8;
+ static const char SplatCsts[] = {
+ -1, 1, -2, 2, -3, 3, -4, 4, -5, 5, -6, 6, -7, 7,
+ -8, 8, -9, 9, -10, 10, -11, 11, -12, 12, -13, 13, 14, -14, 15, -15, -16
+ };
+ for (unsigned idx = 0; idx < sizeof(SplatCsts)/sizeof(SplatCsts[0]); ++idx){
+ // Indirect through the SplatCsts array so that we favor 'vsplti -1' for
+ // cases which are ambiguous (e.g. formation of 0x8000_0000). 'vsplti -1'
+ int i = SplatCsts[idx];
+
+ // Figure out what shift amount will be used by altivec if shifted by i in
+ // this splat size.
+ unsigned TypeShiftAmt = i & (SplatBitSize-1);
+
+ // vsplti + shl self.
+ if (SextVal == (i << (int)TypeShiftAmt)) {
+ Op = BuildSplatI(i, SplatSize, Op.getValueType(), DAG);
+ static const unsigned IIDs[] = { // Intrinsic to use for each size.
+ Intrinsic::ppc_altivec_vslb, Intrinsic::ppc_altivec_vslh, 0,
+ Intrinsic::ppc_altivec_vslw
+ };
+ return BuildIntrinsicOp(IIDs[SplatSize-1], Op, Op, DAG);
+ }
+
+ // vsplti + srl self.
+ if (SextVal == (int)((unsigned)i >> TypeShiftAmt)) {
+ Op = BuildSplatI(i, SplatSize, Op.getValueType(), DAG);
+ static const unsigned IIDs[] = { // Intrinsic to use for each size.
+ Intrinsic::ppc_altivec_vsrb, Intrinsic::ppc_altivec_vsrh, 0,
+ Intrinsic::ppc_altivec_vsrw
+ };
+ return BuildIntrinsicOp(IIDs[SplatSize-1], Op, Op, DAG);
+ }
+
+ // vsplti + sra self.
+ if (SextVal == (int)((unsigned)i >> TypeShiftAmt)) {
+ Op = BuildSplatI(i, SplatSize, Op.getValueType(), DAG);
+ static const unsigned IIDs[] = { // Intrinsic to use for each size.
+ Intrinsic::ppc_altivec_vsrab, Intrinsic::ppc_altivec_vsrah, 0,
+ Intrinsic::ppc_altivec_vsraw
+ };
+ return BuildIntrinsicOp(IIDs[SplatSize-1], Op, Op, DAG);
+ }
+
+ // vsplti + rol self.
+ if (SextVal == (int)(((unsigned)i << TypeShiftAmt) |
+ ((unsigned)i >> (SplatBitSize-TypeShiftAmt)))) {
+ Op = BuildSplatI(i, SplatSize, Op.getValueType(), DAG);
+ static const unsigned IIDs[] = { // Intrinsic to use for each size.
+ Intrinsic::ppc_altivec_vrlb, Intrinsic::ppc_altivec_vrlh, 0,
+ Intrinsic::ppc_altivec_vrlw
+ };
+ return BuildIntrinsicOp(IIDs[SplatSize-1], Op, Op, DAG);
+ }
+
+ // t = vsplti c, result = vsldoi t, t, 1
+ if (SextVal == ((i << 8) | (i >> (TypeShiftAmt-8)))) {
+ SDOperand T = BuildSplatI(i, SplatSize, MVT::v16i8, DAG);
+ return BuildVSLDOI(T, T, 1, Op.getValueType(), DAG);
+ }
+ // t = vsplti c, result = vsldoi t, t, 2
+ if (SextVal == ((i << 16) | (i >> (TypeShiftAmt-16)))) {
+ SDOperand T = BuildSplatI(i, SplatSize, MVT::v16i8, DAG);
+ return BuildVSLDOI(T, T, 2, Op.getValueType(), DAG);
+ }
+ // t = vsplti c, result = vsldoi t, t, 3
+ if (SextVal == ((i << 24) | (i >> (TypeShiftAmt-24)))) {
+ SDOperand T = BuildSplatI(i, SplatSize, MVT::v16i8, DAG);
+ return BuildVSLDOI(T, T, 3, Op.getValueType(), DAG);
+ }
+ }
+
+ // Three instruction sequences.
+
+ // Odd, in range [17,31]: (vsplti C)-(vsplti -16).
+ if (SextVal >= 0 && SextVal <= 31) {
+ SDOperand LHS = BuildSplatI(SextVal-16, SplatSize, Op.getValueType(),DAG);
+ SDOperand RHS = BuildSplatI(-16, SplatSize, Op.getValueType(), DAG);
+ return DAG.getNode(ISD::SUB, Op.getValueType(), LHS, RHS);
+ }
+ // Odd, in range [-31,-17]: (vsplti C)+(vsplti -16).
+ if (SextVal >= -31 && SextVal <= 0) {
+ SDOperand LHS = BuildSplatI(SextVal+16, SplatSize, Op.getValueType(),DAG);
+ SDOperand RHS = BuildSplatI(-16, SplatSize, Op.getValueType(), DAG);
+ return DAG.getNode(ISD::ADD, Op.getValueType(), LHS, RHS);
+ }
+ }
+
+ return SDOperand();
+}
+
+/// GeneratePerfectShuffle - Given an entry in the perfect-shuffle table, emit
+/// the specified operations to build the shuffle.
+static SDOperand GeneratePerfectShuffle(unsigned PFEntry, SDOperand LHS,
+ SDOperand RHS, SelectionDAG &DAG) {
+ unsigned OpNum = (PFEntry >> 26) & 0x0F;
+ unsigned LHSID = (PFEntry >> 13) & ((1 << 13)-1);
+ unsigned RHSID = (PFEntry >> 0) & ((1 << 13)-1);
+
+ enum {
+ OP_COPY = 0, // Copy, used for things like <u,u,u,3> to say it is <0,1,2,3>
+ OP_VMRGHW,
+ OP_VMRGLW,
+ OP_VSPLTISW0,
+ OP_VSPLTISW1,
+ OP_VSPLTISW2,
+ OP_VSPLTISW3,
+ OP_VSLDOI4,
+ OP_VSLDOI8,
+ OP_VSLDOI12
+ };
+
+ if (OpNum == OP_COPY) {
+ if (LHSID == (1*9+2)*9+3) return LHS;
+ assert(LHSID == ((4*9+5)*9+6)*9+7 && "Illegal OP_COPY!");
+ return RHS;
+ }
+
+ SDOperand OpLHS, OpRHS;
+ OpLHS = GeneratePerfectShuffle(PerfectShuffleTable[LHSID], LHS, RHS, DAG);
+ OpRHS = GeneratePerfectShuffle(PerfectShuffleTable[RHSID], LHS, RHS, DAG);
+
+ unsigned ShufIdxs[16];
+ switch (OpNum) {
+ default: assert(0 && "Unknown i32 permute!");
+ case OP_VMRGHW:
+ ShufIdxs[ 0] = 0; ShufIdxs[ 1] = 1; ShufIdxs[ 2] = 2; ShufIdxs[ 3] = 3;
+ ShufIdxs[ 4] = 16; ShufIdxs[ 5] = 17; ShufIdxs[ 6] = 18; ShufIdxs[ 7] = 19;
+ ShufIdxs[ 8] = 4; ShufIdxs[ 9] = 5; ShufIdxs[10] = 6; ShufIdxs[11] = 7;
+ ShufIdxs[12] = 20; ShufIdxs[13] = 21; ShufIdxs[14] = 22; ShufIdxs[15] = 23;
+ break;
+ case OP_VMRGLW:
+ ShufIdxs[ 0] = 8; ShufIdxs[ 1] = 9; ShufIdxs[ 2] = 10; ShufIdxs[ 3] = 11;
+ ShufIdxs[ 4] = 24; ShufIdxs[ 5] = 25; ShufIdxs[ 6] = 26; ShufIdxs[ 7] = 27;
+ ShufIdxs[ 8] = 12; ShufIdxs[ 9] = 13; ShufIdxs[10] = 14; ShufIdxs[11] = 15;
+ ShufIdxs[12] = 28; ShufIdxs[13] = 29; ShufIdxs[14] = 30; ShufIdxs[15] = 31;
+ break;
+ case OP_VSPLTISW0:
+ for (unsigned i = 0; i != 16; ++i)
+ ShufIdxs[i] = (i&3)+0;
+ break;
+ case OP_VSPLTISW1:
+ for (unsigned i = 0; i != 16; ++i)
+ ShufIdxs[i] = (i&3)+4;
+ break;
+ case OP_VSPLTISW2:
+ for (unsigned i = 0; i != 16; ++i)
+ ShufIdxs[i] = (i&3)+8;
+ break;
+ case OP_VSPLTISW3:
+ for (unsigned i = 0; i != 16; ++i)
+ ShufIdxs[i] = (i&3)+12;
+ break;
+ case OP_VSLDOI4:
+ return BuildVSLDOI(OpLHS, OpRHS, 4, OpLHS.getValueType(), DAG);
+ case OP_VSLDOI8:
+ return BuildVSLDOI(OpLHS, OpRHS, 8, OpLHS.getValueType(), DAG);
+ case OP_VSLDOI12:
+ return BuildVSLDOI(OpLHS, OpRHS, 12, OpLHS.getValueType(), DAG);
+ }
+ std::vector<SDOperand> Ops;
+ for (unsigned i = 0; i != 16; ++i)
+ Ops.push_back(DAG.getConstant(ShufIdxs[i], MVT::i32));
+
+ return DAG.getNode(ISD::VECTOR_SHUFFLE, OpLHS.getValueType(), OpLHS, OpRHS,
+ DAG.getNode(ISD::BUILD_VECTOR, MVT::v16i8, Ops));
+}
+
+/// LowerVECTOR_SHUFFLE - Return the code we lower for VECTOR_SHUFFLE. If this
+/// is a shuffle we can handle in a single instruction, return it. Otherwise,
+/// return the code it can be lowered into. Worst case, it can always be
+/// lowered into a vperm.
+static SDOperand LowerVECTOR_SHUFFLE(SDOperand Op, SelectionDAG &DAG) {
+ SDOperand V1 = Op.getOperand(0);
+ SDOperand V2 = Op.getOperand(1);
+ SDOperand PermMask = Op.getOperand(2);
+
+ // Cases that are handled by instructions that take permute immediates
+ // (such as vsplt*) should be left as VECTOR_SHUFFLE nodes so they can be
+ // selected by the instruction selector.
+ if (V2.getOpcode() == ISD::UNDEF) {
+ if (PPC::isSplatShuffleMask(PermMask.Val, 1) ||
+ PPC::isSplatShuffleMask(PermMask.Val, 2) ||
+ PPC::isSplatShuffleMask(PermMask.Val, 4) ||
+ PPC::isVPKUWUMShuffleMask(PermMask.Val, true) ||
+ PPC::isVPKUHUMShuffleMask(PermMask.Val, true) ||
+ PPC::isVSLDOIShuffleMask(PermMask.Val, true) != -1 ||
+ PPC::isVMRGLShuffleMask(PermMask.Val, 1, true) ||
+ PPC::isVMRGLShuffleMask(PermMask.Val, 2, true) ||
+ PPC::isVMRGLShuffleMask(PermMask.Val, 4, true) ||
+ PPC::isVMRGHShuffleMask(PermMask.Val, 1, true) ||
+ PPC::isVMRGHShuffleMask(PermMask.Val, 2, true) ||
+ PPC::isVMRGHShuffleMask(PermMask.Val, 4, true)) {
+ return Op;
+ }
+ }
+
+ // Altivec has a variety of "shuffle immediates" that take two vector inputs
+ // and produce a fixed permutation. If any of these match, do not lower to
+ // VPERM.
+ if (PPC::isVPKUWUMShuffleMask(PermMask.Val, false) ||
+ PPC::isVPKUHUMShuffleMask(PermMask.Val, false) ||
+ PPC::isVSLDOIShuffleMask(PermMask.Val, false) != -1 ||
+ PPC::isVMRGLShuffleMask(PermMask.Val, 1, false) ||
+ PPC::isVMRGLShuffleMask(PermMask.Val, 2, false) ||
+ PPC::isVMRGLShuffleMask(PermMask.Val, 4, false) ||
+ PPC::isVMRGHShuffleMask(PermMask.Val, 1, false) ||
+ PPC::isVMRGHShuffleMask(PermMask.Val, 2, false) ||
+ PPC::isVMRGHShuffleMask(PermMask.Val, 4, false))
+ return Op;
+
+ // Check to see if this is a shuffle of 4-byte values. If so, we can use our
+ // perfect shuffle table to emit an optimal matching sequence.
+ unsigned PFIndexes[4];
+ bool isFourElementShuffle = true;
+ for (unsigned i = 0; i != 4 && isFourElementShuffle; ++i) { // Element number
+ unsigned EltNo = 8; // Start out undef.
+ for (unsigned j = 0; j != 4; ++j) { // Intra-element byte.
+ if (PermMask.getOperand(i*4+j).getOpcode() == ISD::UNDEF)
+ continue; // Undef, ignore it.
+
+ unsigned ByteSource =
+ cast<ConstantSDNode>(PermMask.getOperand(i*4+j))->getValue();
+ if ((ByteSource & 3) != j) {
+ isFourElementShuffle = false;
break;
- case MVT::f32:
- case MVT::f64:
- if (FPR_remaining > 0) {
- args_to_use.push_back(Args[i].first);
- --FPR_remaining;
- if (isVarArg) {
- SDOperand Store = DAG.getNode(ISD::STORE, MVT::Other, Chain,
- Args[i].first, PtrOff,
- DAG.getSrcValue(NULL));
- MemOps.push_back(Store);
- // Float varargs are always shadowed in available integer registers
- if (GPR_remaining > 0) {
- SDOperand Load = DAG.getLoad(MVT::i32, Store, PtrOff,
- DAG.getSrcValue(NULL));
- MemOps.push_back(Load.getValue(1));
- args_to_use.push_back(Load);
- --GPR_remaining;
- }
- if (GPR_remaining > 0 && MVT::f64 == ArgVT) {
- SDOperand ConstFour = DAG.getConstant(4, getPointerTy());
- PtrOff = DAG.getNode(ISD::ADD, MVT::i32, PtrOff, ConstFour);
- SDOperand Load = DAG.getLoad(MVT::i32, Store, PtrOff,
- DAG.getSrcValue(NULL));
- MemOps.push_back(Load.getValue(1));
- args_to_use.push_back(Load);
- --GPR_remaining;
- }
- } else {
- // If we have any FPRs remaining, we may also have GPRs remaining.
- // Args passed in FPRs consume either 1 (f32) or 2 (f64) available
- // GPRs.
- if (GPR_remaining > 0) {
- args_to_use.push_back(DAG.getNode(ISD::UNDEF, MVT::i32));
- --GPR_remaining;
- }
- if (GPR_remaining > 0 && MVT::f64 == ArgVT) {
- args_to_use.push_back(DAG.getNode(ISD::UNDEF, MVT::i32));
- --GPR_remaining;
- }
- }
- } else {
- MemOps.push_back(DAG.getNode(ISD::STORE, MVT::Other, Chain,
- Args[i].first, PtrOff,
- DAG.getSrcValue(NULL)));
- }
- ArgOffset += (ArgVT == MVT::f32) ? 4 : 8;
+ }
+
+ if (EltNo == 8) {
+ EltNo = ByteSource/4;
+ } else if (EltNo != ByteSource/4) {
+ isFourElementShuffle = false;
break;
}
}
- if (!MemOps.empty())
- Chain = DAG.getNode(ISD::TokenFactor, MVT::Other, MemOps);
+ PFIndexes[i] = EltNo;
+ }
+
+ // If this shuffle can be expressed as a shuffle of 4-byte elements, use the
+ // perfect shuffle vector to determine if it is cost effective to do this as
+ // discrete instructions, or whether we should use a vperm.
+ if (isFourElementShuffle) {
+ // Compute the index in the perfect shuffle table.
+ unsigned PFTableIndex =
+ PFIndexes[0]*9*9*9+PFIndexes[1]*9*9+PFIndexes[2]*9+PFIndexes[3];
+
+ unsigned PFEntry = PerfectShuffleTable[PFTableIndex];
+ unsigned Cost = (PFEntry >> 30);
+
+ // Determining when to avoid vperm is tricky. Many things affect the cost
+ // of vperm, particularly how many times the perm mask needs to be computed.
+ // For example, if the perm mask can be hoisted out of a loop or is already
+ // used (perhaps because there are multiple permutes with the same shuffle
+ // mask?) the vperm has a cost of 1. OTOH, hoisting the permute mask out of
+ // the loop requires an extra register.
+ //
+ // As a compromise, we only emit discrete instructions if the shuffle can be
+ // generated in 3 or fewer operations. When we have loop information
+ // available, if this block is within a loop, we should avoid using vperm
+ // for 3-operation perms and use a constant pool load instead.
+ if (Cost < 3)
+ return GeneratePerfectShuffle(PFEntry, V1, V2, DAG);
}
- std::vector<MVT::ValueType> RetVals;
- MVT::ValueType RetTyVT = getValueType(RetTy);
- MVT::ValueType ActualRetTyVT = RetTyVT;
- if (RetTyVT >= MVT::i1 && RetTyVT <= MVT::i16)
- ActualRetTyVT = MVT::i32; // Promote result to i32.
+ // Lower this to a VPERM(V1, V2, V3) expression, where V3 is a constant
+ // vector that will get spilled to the constant pool.
+ if (V2.getOpcode() == ISD::UNDEF) V2 = V1;
+
+ // The SHUFFLE_VECTOR mask is almost exactly what we want for vperm, except
+ // that it is in input element units, not in bytes. Convert now.
+ MVT::ValueType EltVT = MVT::getVectorBaseType(V1.getValueType());
+ unsigned BytesPerElement = MVT::getSizeInBits(EltVT)/8;
+
+ std::vector<SDOperand> ResultMask;
+ for (unsigned i = 0, e = PermMask.getNumOperands(); i != e; ++i) {
+ unsigned SrcElt;
+ if (PermMask.getOperand(i).getOpcode() == ISD::UNDEF)
+ SrcElt = 0;
+ else
+ SrcElt = cast<ConstantSDNode>(PermMask.getOperand(i))->getValue();
- if (RetTyVT == MVT::i64) {
- RetVals.push_back(MVT::i32);
- RetVals.push_back(MVT::i32);
- } else if (RetTyVT != MVT::isVoid) {
- RetVals.push_back(ActualRetTyVT);
+ for (unsigned j = 0; j != BytesPerElement; ++j)
+ ResultMask.push_back(DAG.getConstant(SrcElt*BytesPerElement+j,
+ MVT::i8));
}
- RetVals.push_back(MVT::Other);
- // If the callee is a GlobalAddress node (quite common, every direct call is)
- // turn it into a TargetGlobalAddress node so that legalize doesn't hack it.
- if (GlobalAddressSDNode *G = dyn_cast<GlobalAddressSDNode>(Callee))
- Callee = DAG.getTargetGlobalAddress(G->getGlobal(), MVT::i32);
+ SDOperand VPermMask = DAG.getNode(ISD::BUILD_VECTOR, MVT::v16i8, ResultMask);
+ return DAG.getNode(PPCISD::VPERM, V1.getValueType(), V1, V2, VPermMask);
+}
+
+/// getAltivecCompareInfo - Given an intrinsic, return false if it is not an
+/// altivec comparison. If it is, return true and fill in Opc/isDot with
+/// information about the intrinsic.
+static bool getAltivecCompareInfo(SDOperand Intrin, int &CompareOpc,
+ bool &isDot) {
+ unsigned IntrinsicID = cast<ConstantSDNode>(Intrin.getOperand(0))->getValue();
+ CompareOpc = -1;
+ isDot = false;
+ switch (IntrinsicID) {
+ default: return false;
+ // Comparison predicates.
+ case Intrinsic::ppc_altivec_vcmpbfp_p: CompareOpc = 966; isDot = 1; break;
+ case Intrinsic::ppc_altivec_vcmpeqfp_p: CompareOpc = 198; isDot = 1; break;
+ case Intrinsic::ppc_altivec_vcmpequb_p: CompareOpc = 6; isDot = 1; break;
+ case Intrinsic::ppc_altivec_vcmpequh_p: CompareOpc = 70; isDot = 1; break;
+ case Intrinsic::ppc_altivec_vcmpequw_p: CompareOpc = 134; isDot = 1; break;
+ case Intrinsic::ppc_altivec_vcmpgefp_p: CompareOpc = 454; isDot = 1; break;
+ case Intrinsic::ppc_altivec_vcmpgtfp_p: CompareOpc = 710; isDot = 1; break;
+ case Intrinsic::ppc_altivec_vcmpgtsb_p: CompareOpc = 774; isDot = 1; break;
+ case Intrinsic::ppc_altivec_vcmpgtsh_p: CompareOpc = 838; isDot = 1; break;
+ case Intrinsic::ppc_altivec_vcmpgtsw_p: CompareOpc = 902; isDot = 1; break;
+ case Intrinsic::ppc_altivec_vcmpgtub_p: CompareOpc = 518; isDot = 1; break;
+ case Intrinsic::ppc_altivec_vcmpgtuh_p: CompareOpc = 582; isDot = 1; break;
+ case Intrinsic::ppc_altivec_vcmpgtuw_p: CompareOpc = 646; isDot = 1; break;
+
+ // Normal Comparisons.
+ case Intrinsic::ppc_altivec_vcmpbfp: CompareOpc = 966; isDot = 0; break;
+ case Intrinsic::ppc_altivec_vcmpeqfp: CompareOpc = 198; isDot = 0; break;
+ case Intrinsic::ppc_altivec_vcmpequb: CompareOpc = 6; isDot = 0; break;
+ case Intrinsic::ppc_altivec_vcmpequh: CompareOpc = 70; isDot = 0; break;
+ case Intrinsic::ppc_altivec_vcmpequw: CompareOpc = 134; isDot = 0; break;
+ case Intrinsic::ppc_altivec_vcmpgefp: CompareOpc = 454; isDot = 0; break;
+ case Intrinsic::ppc_altivec_vcmpgtfp: CompareOpc = 710; isDot = 0; break;
+ case Intrinsic::ppc_altivec_vcmpgtsb: CompareOpc = 774; isDot = 0; break;
+ case Intrinsic::ppc_altivec_vcmpgtsh: CompareOpc = 838; isDot = 0; break;
+ case Intrinsic::ppc_altivec_vcmpgtsw: CompareOpc = 902; isDot = 0; break;
+ case Intrinsic::ppc_altivec_vcmpgtub: CompareOpc = 518; isDot = 0; break;
+ case Intrinsic::ppc_altivec_vcmpgtuh: CompareOpc = 582; isDot = 0; break;
+ case Intrinsic::ppc_altivec_vcmpgtuw: CompareOpc = 646; isDot = 0; break;
+ }
+ return true;
+}
+
+/// LowerINTRINSIC_WO_CHAIN - If this is an intrinsic that we want to custom
+/// lower, do it, otherwise return null.
+static SDOperand LowerINTRINSIC_WO_CHAIN(SDOperand Op, SelectionDAG &DAG) {
+ // If this is a lowered altivec predicate compare, CompareOpc is set to the
+ // opcode number of the comparison.
+ int CompareOpc;
+ bool isDot;
+ if (!getAltivecCompareInfo(Op, CompareOpc, isDot))
+ return SDOperand(); // Don't custom lower most intrinsics.
+
+ // If this is a non-dot comparison, make the VCMP node and we are done.
+ if (!isDot) {
+ SDOperand Tmp = DAG.getNode(PPCISD::VCMP, Op.getOperand(2).getValueType(),
+ Op.getOperand(1), Op.getOperand(2),
+ DAG.getConstant(CompareOpc, MVT::i32));
+ return DAG.getNode(ISD::BIT_CONVERT, Op.getValueType(), Tmp);
+ }
+ // Create the PPCISD altivec 'dot' comparison node.
std::vector<SDOperand> Ops;
- Ops.push_back(Chain);
- Ops.push_back(Callee);
- Ops.insert(Ops.end(), args_to_use.begin(), args_to_use.end());
- SDOperand TheCall = DAG.getNode(PPCISD::CALL, RetVals, Ops);
- Chain = TheCall.getValue(TheCall.Val->getNumValues()-1);
- Chain = DAG.getNode(ISD::CALLSEQ_END, MVT::Other, Chain,
- DAG.getConstant(NumBytes, getPointerTy()));
- SDOperand RetVal = TheCall;
-
- // If the result is a small value, add a note so that we keep track of the
- // information about whether it is sign or zero extended.
- if (RetTyVT != ActualRetTyVT) {
- RetVal = DAG.getNode(RetTy->isSigned() ? ISD::AssertSext : ISD::AssertZext,
- MVT::i32, RetVal, DAG.getValueType(RetTyVT));
- RetVal = DAG.getNode(ISD::TRUNCATE, RetTyVT, RetVal);
- } else if (RetTyVT == MVT::i64) {
- RetVal = DAG.getNode(ISD::BUILD_PAIR, MVT::i64, RetVal, RetVal.getValue(1));
+ std::vector<MVT::ValueType> VTs;
+ Ops.push_back(Op.getOperand(2)); // LHS
+ Ops.push_back(Op.getOperand(3)); // RHS
+ Ops.push_back(DAG.getConstant(CompareOpc, MVT::i32));
+ VTs.push_back(Op.getOperand(2).getValueType());
+ VTs.push_back(MVT::Flag);
+ SDOperand CompNode = DAG.getNode(PPCISD::VCMPo, VTs, Ops);
+
+ // Now that we have the comparison, emit a copy from the CR to a GPR.
+ // This is flagged to the above dot comparison.
+ SDOperand Flags = DAG.getNode(PPCISD::MFCR, MVT::i32,
+ DAG.getRegister(PPC::CR6, MVT::i32),
+ CompNode.getValue(1));
+
+ // Unpack the result based on how the target uses it.
+ unsigned BitNo; // Bit # of CR6.
+ bool InvertBit; // Invert result?
+ switch (cast<ConstantSDNode>(Op.getOperand(1))->getValue()) {
+ default: // Can't happen, don't crash on invalid number though.
+ case 0: // Return the value of the EQ bit of CR6.
+ BitNo = 0; InvertBit = false;
+ break;
+ case 1: // Return the inverted value of the EQ bit of CR6.
+ BitNo = 0; InvertBit = true;
+ break;
+ case 2: // Return the value of the LT bit of CR6.
+ BitNo = 2; InvertBit = false;
+ break;
+ case 3: // Return the inverted value of the LT bit of CR6.
+ BitNo = 2; InvertBit = true;
+ break;
}
- return std::make_pair(RetVal, Chain);
+ // Shift the bit into the low position.
+ Flags = DAG.getNode(ISD::SRL, MVT::i32, Flags,
+ DAG.getConstant(8-(3-BitNo), MVT::i32));
+ // Isolate the bit.
+ Flags = DAG.getNode(ISD::AND, MVT::i32, Flags,
+ DAG.getConstant(1, MVT::i32));
+
+ // If we are supposed to, toggle the bit.
+ if (InvertBit)
+ Flags = DAG.getNode(ISD::XOR, MVT::i32, Flags,
+ DAG.getConstant(1, MVT::i32));
+ return Flags;
}
+static SDOperand LowerSCALAR_TO_VECTOR(SDOperand Op, SelectionDAG &DAG) {
+ // Create a stack slot that is 16-byte aligned.
+ MachineFrameInfo *FrameInfo = DAG.getMachineFunction().getFrameInfo();
+ int FrameIdx = FrameInfo->CreateStackObject(16, 16);
+ SDOperand FIdx = DAG.getFrameIndex(FrameIdx, MVT::i32);
+
+ // Store the input value into Value#0 of the stack slot.
+ SDOperand Store = DAG.getNode(ISD::STORE, MVT::Other, DAG.getEntryNode(),
+ Op.getOperand(0), FIdx,DAG.getSrcValue(NULL));
+ // Load it out.
+ return DAG.getLoad(Op.getValueType(), Store, FIdx, DAG.getSrcValue(NULL));
+}
+
+static SDOperand LowerMUL(SDOperand Op, SelectionDAG &DAG) {
+ if (Op.getValueType() == MVT::v4i32) {
+ SDOperand LHS = Op.getOperand(0), RHS = Op.getOperand(1);
+
+ SDOperand Zero = BuildSplatI( 0, 1, MVT::v4i32, DAG);
+ SDOperand Neg16 = BuildSplatI(-16, 4, MVT::v4i32, DAG); // +16 as shift amt.
+
+ SDOperand RHSSwap = // = vrlw RHS, 16
+ BuildIntrinsicOp(Intrinsic::ppc_altivec_vrlw, RHS, Neg16, DAG);
+
+ // Shrinkify inputs to v8i16.
+ LHS = DAG.getNode(ISD::BIT_CONVERT, MVT::v8i16, LHS);
+ RHS = DAG.getNode(ISD::BIT_CONVERT, MVT::v8i16, RHS);
+ RHSSwap = DAG.getNode(ISD::BIT_CONVERT, MVT::v8i16, RHSSwap);
+
+ // Low parts multiplied together, generating 32-bit results (we ignore the
+ // top parts).
+ SDOperand LoProd = BuildIntrinsicOp(Intrinsic::ppc_altivec_vmulouh,
+ LHS, RHS, DAG, MVT::v4i32);
+
+ SDOperand HiProd = BuildIntrinsicOp(Intrinsic::ppc_altivec_vmsumuhm,
+ LHS, RHSSwap, Zero, DAG, MVT::v4i32);
+ // Shift the high parts up 16 bits.
+ HiProd = BuildIntrinsicOp(Intrinsic::ppc_altivec_vslw, HiProd, Neg16, DAG);
+ return DAG.getNode(ISD::ADD, MVT::v4i32, LoProd, HiProd);
+ } else if (Op.getValueType() == MVT::v8i16) {
+ SDOperand LHS = Op.getOperand(0), RHS = Op.getOperand(1);
+
+ SDOperand Zero = BuildSplatI(0, 1, MVT::v8i16, DAG);
+
+ return BuildIntrinsicOp(Intrinsic::ppc_altivec_vmladduhm,
+ LHS, RHS, Zero, DAG);
+ } else if (Op.getValueType() == MVT::v16i8) {
+ SDOperand LHS = Op.getOperand(0), RHS = Op.getOperand(1);
+
+ // Multiply the even 8-bit parts, producing 16-bit sums.
+ SDOperand EvenParts = BuildIntrinsicOp(Intrinsic::ppc_altivec_vmuleub,
+ LHS, RHS, DAG, MVT::v8i16);
+ EvenParts = DAG.getNode(ISD::BIT_CONVERT, MVT::v16i8, EvenParts);
+
+ // Multiply the odd 8-bit parts, producing 16-bit sums.
+ SDOperand OddParts = BuildIntrinsicOp(Intrinsic::ppc_altivec_vmuloub,
+ LHS, RHS, DAG, MVT::v8i16);
+ OddParts = DAG.getNode(ISD::BIT_CONVERT, MVT::v16i8, OddParts);
+
+ // Merge the results together.
+ std::vector<SDOperand> Ops;
+ for (unsigned i = 0; i != 8; ++i) {
+ Ops.push_back(DAG.getConstant(2*i+1, MVT::i8));
+ Ops.push_back(DAG.getConstant(2*i+1+16, MVT::i8));
+ }
+
+ return DAG.getNode(ISD::VECTOR_SHUFFLE, MVT::v16i8, EvenParts, OddParts,
+ DAG.getNode(ISD::BUILD_VECTOR, MVT::v16i8, Ops));
+ } else {
+ assert(0 && "Unknown mul to lower!");
+ abort();
+ }
+}
+
+/// LowerOperation - Provide custom lowering hooks for some operations.
+///
+SDOperand PPCTargetLowering::LowerOperation(SDOperand Op, SelectionDAG &DAG) {
+ switch (Op.getOpcode()) {
+ default: assert(0 && "Wasn't expecting to be able to lower this!");
+ case ISD::ConstantPool: return LowerConstantPool(Op, DAG);
+ case ISD::GlobalAddress: return LowerGlobalAddress(Op, DAG);
+ case ISD::JumpTable: return LowerJumpTable(Op, DAG);
+ case ISD::SETCC: return LowerSETCC(Op, DAG);
+ case ISD::VASTART: return LowerVASTART(Op, DAG, VarArgsFrameIndex);
+ case ISD::FORMAL_ARGUMENTS:
+ return LowerFORMAL_ARGUMENTS(Op, DAG, VarArgsFrameIndex);
+ case ISD::CALL: return LowerCALL(Op, DAG);
+ case ISD::RET: return LowerRET(Op, DAG);
+
+ case ISD::SELECT_CC: return LowerSELECT_CC(Op, DAG);
+ case ISD::FP_TO_SINT: return LowerFP_TO_SINT(Op, DAG);
+ case ISD::SINT_TO_FP: return LowerSINT_TO_FP(Op, DAG);
+
+ // Lower 64-bit shifts.
+ case ISD::SHL: return LowerSHL(Op, DAG, getPointerTy());
+ case ISD::SRL: return LowerSRL(Op, DAG, getPointerTy());
+ case ISD::SRA: return LowerSRA(Op, DAG, getPointerTy());
+
+ // Vector-related lowering.
+ case ISD::BUILD_VECTOR: return LowerBUILD_VECTOR(Op, DAG);
+ case ISD::VECTOR_SHUFFLE: return LowerVECTOR_SHUFFLE(Op, DAG);
+ case ISD::INTRINSIC_WO_CHAIN: return LowerINTRINSIC_WO_CHAIN(Op, DAG);
+ case ISD::SCALAR_TO_VECTOR: return LowerSCALAR_TO_VECTOR(Op, DAG);
+ case ISD::MUL: return LowerMUL(Op, DAG);
+ }
+ return SDOperand();
+}
+
+//===----------------------------------------------------------------------===//
+// Other Lowering Code
+//===----------------------------------------------------------------------===//
+
MachineBasicBlock *
PPCTargetLowering::InsertAtEndOfBasicBlock(MachineInstr *MI,
MachineBasicBlock *BB) {
- assert((MI->getOpcode() == PPC::SELECT_CC_Int ||
+ assert((MI->getOpcode() == PPC::SELECT_CC_I4 ||
+ MI->getOpcode() == PPC::SELECT_CC_I8 ||
MI->getOpcode() == PPC::SELECT_CC_F4 ||
- MI->getOpcode() == PPC::SELECT_CC_F8) &&
+ MI->getOpcode() == PPC::SELECT_CC_F8 ||
+ MI->getOpcode() == PPC::SELECT_CC_VRRC) &&
"Unexpected instr type to insert");
// To "insert" a SELECT_CC instruction, we actually have to insert the diamond
return BB;
}
+//===----------------------------------------------------------------------===//
+// Target Optimization Hooks
+//===----------------------------------------------------------------------===//
+
SDOperand PPCTargetLowering::PerformDAGCombine(SDNode *N,
DAGCombinerInfo &DCI) const {
TargetMachine &TM = getTargetMachine();
switch (N->getOpcode()) {
default: break;
case ISD::SINT_TO_FP:
- if (TM.getSubtarget<PPCSubtarget>().is64Bit()) {
+ if (TM.getSubtarget<PPCSubtarget>().has64BitSupport()) {
if (N->getOperand(0).getOpcode() == ISD::FP_TO_SINT) {
// Turn (sint_to_fp (fp_to_sint X)) -> fctidz/fcfid without load/stores.
// We allow the src/dst to be either f32/f64, but the intermediate
return Val;
}
break;
+ case PPCISD::VCMP: {
+ // If a VCMPo node already exists with exactly the same operands as this
+ // node, use its result instead of this node (VCMPo computes both a CR6 and
+ // a normal output).
+ //
+ if (!N->getOperand(0).hasOneUse() &&
+ !N->getOperand(1).hasOneUse() &&
+ !N->getOperand(2).hasOneUse()) {
+
+ // Scan all of the users of the LHS, looking for VCMPo's that match.
+ SDNode *VCMPoNode = 0;
+
+ SDNode *LHSN = N->getOperand(0).Val;
+ for (SDNode::use_iterator UI = LHSN->use_begin(), E = LHSN->use_end();
+ UI != E; ++UI)
+ if ((*UI)->getOpcode() == PPCISD::VCMPo &&
+ (*UI)->getOperand(1) == N->getOperand(1) &&
+ (*UI)->getOperand(2) == N->getOperand(2) &&
+ (*UI)->getOperand(0) == N->getOperand(0)) {
+ VCMPoNode = *UI;
+ break;
+ }
+
+ // If there is no VCMPo node, or if the flag value has a single use, don't
+ // transform this.
+ if (!VCMPoNode || VCMPoNode->hasNUsesOfValue(0, 1))
+ break;
+
+ // Look at the (necessarily single) use of the flag value. If it has a
+ // chain, this transformation is more complex. Note that multiple things
+ // could use the value result, which we should ignore.
+ SDNode *FlagUser = 0;
+ for (SDNode::use_iterator UI = VCMPoNode->use_begin();
+ FlagUser == 0; ++UI) {
+ assert(UI != VCMPoNode->use_end() && "Didn't find user!");
+ SDNode *User = *UI;
+ for (unsigned i = 0, e = User->getNumOperands(); i != e; ++i) {
+ if (User->getOperand(i) == SDOperand(VCMPoNode, 1)) {
+ FlagUser = User;
+ break;
+ }
+ }
+ }
+
+ // If the user is a MFCR instruction, we know this is safe. Otherwise we
+ // give up for right now.
+ if (FlagUser->getOpcode() == PPCISD::MFCR)
+ return SDOperand(VCMPoNode, 0);
+ }
+ break;
+ }
+ case ISD::BR_CC: {
+ // If this is a branch on an altivec predicate comparison, lower this so
+ // that we don't have to do a MFCR: instead, branch directly on CR6. This
+ // lowering is done pre-legalize, because the legalizer lowers the predicate
+ // compare down to code that is difficult to reassemble.
+ ISD::CondCode CC = cast<CondCodeSDNode>(N->getOperand(1))->get();
+ SDOperand LHS = N->getOperand(2), RHS = N->getOperand(3);
+ int CompareOpc;
+ bool isDot;
+
+ if (LHS.getOpcode() == ISD::INTRINSIC_WO_CHAIN &&
+ isa<ConstantSDNode>(RHS) && (CC == ISD::SETEQ || CC == ISD::SETNE) &&
+ getAltivecCompareInfo(LHS, CompareOpc, isDot)) {
+ assert(isDot && "Can't compare against a vector result!");
+
+ // If this is a comparison against something other than 0/1, then we know
+ // that the condition is never/always true.
+ unsigned Val = cast<ConstantSDNode>(RHS)->getValue();
+ if (Val != 0 && Val != 1) {
+ if (CC == ISD::SETEQ) // Cond never true, remove branch.
+ return N->getOperand(0);
+ // Always !=, turn it into an unconditional branch.
+ return DAG.getNode(ISD::BR, MVT::Other,
+ N->getOperand(0), N->getOperand(4));
+ }
+
+ bool BranchOnWhenPredTrue = (CC == ISD::SETEQ) ^ (Val == 0);
+
+ // Create the PPCISD altivec 'dot' comparison node.
+ std::vector<SDOperand> Ops;
+ std::vector<MVT::ValueType> VTs;
+ Ops.push_back(LHS.getOperand(2)); // LHS of compare
+ Ops.push_back(LHS.getOperand(3)); // RHS of compare
+ Ops.push_back(DAG.getConstant(CompareOpc, MVT::i32));
+ VTs.push_back(LHS.getOperand(2).getValueType());
+ VTs.push_back(MVT::Flag);
+ SDOperand CompNode = DAG.getNode(PPCISD::VCMPo, VTs, Ops);
+
+ // Unpack the result based on how the target uses it.
+ unsigned CompOpc;
+ switch (cast<ConstantSDNode>(LHS.getOperand(1))->getValue()) {
+ default: // Can't happen, don't crash on invalid number though.
+ case 0: // Branch on the value of the EQ bit of CR6.
+ CompOpc = BranchOnWhenPredTrue ? PPC::BEQ : PPC::BNE;
+ break;
+ case 1: // Branch on the inverted value of the EQ bit of CR6.
+ CompOpc = BranchOnWhenPredTrue ? PPC::BNE : PPC::BEQ;
+ break;
+ case 2: // Branch on the value of the LT bit of CR6.
+ CompOpc = BranchOnWhenPredTrue ? PPC::BLT : PPC::BGE;
+ break;
+ case 3: // Branch on the inverted value of the LT bit of CR6.
+ CompOpc = BranchOnWhenPredTrue ? PPC::BGE : PPC::BLT;
+ break;
+ }
+
+ return DAG.getNode(PPCISD::COND_BRANCH, MVT::Other, N->getOperand(0),
+ DAG.getRegister(PPC::CR6, MVT::i32),
+ DAG.getConstant(CompOpc, MVT::i32),
+ N->getOperand(4), CompNode.getValue(1));
+ }
+ break;
+ }
}
return SDOperand();
}
+//===----------------------------------------------------------------------===//
+// Inline Assembly Support
+//===----------------------------------------------------------------------===//
+
+void PPCTargetLowering::computeMaskedBitsForTargetNode(const SDOperand Op,
+ uint64_t Mask,
+ uint64_t &KnownZero,
+ uint64_t &KnownOne,
+ unsigned Depth) const {
+ KnownZero = 0;
+ KnownOne = 0;
+ switch (Op.getOpcode()) {
+ default: break;
+ case ISD::INTRINSIC_WO_CHAIN: {
+ switch (cast<ConstantSDNode>(Op.getOperand(0))->getValue()) {
+ default: break;
+ case Intrinsic::ppc_altivec_vcmpbfp_p:
+ case Intrinsic::ppc_altivec_vcmpeqfp_p:
+ case Intrinsic::ppc_altivec_vcmpequb_p:
+ case Intrinsic::ppc_altivec_vcmpequh_p:
+ case Intrinsic::ppc_altivec_vcmpequw_p:
+ case Intrinsic::ppc_altivec_vcmpgefp_p:
+ case Intrinsic::ppc_altivec_vcmpgtfp_p:
+ case Intrinsic::ppc_altivec_vcmpgtsb_p:
+ case Intrinsic::ppc_altivec_vcmpgtsh_p:
+ case Intrinsic::ppc_altivec_vcmpgtsw_p:
+ case Intrinsic::ppc_altivec_vcmpgtub_p:
+ case Intrinsic::ppc_altivec_vcmpgtuh_p:
+ case Intrinsic::ppc_altivec_vcmpgtuw_p:
+ KnownZero = ~1U; // All bits but the low one are known to be zero.
+ break;
+ }
+ }
+ }
+}
+
+
/// getConstraintType - Given a constraint letter, return the type of
/// constraint it is for this target.
PPCTargetLowering::ConstraintType
projects / oota-llvm.git / blobdiff