-//===-- SparcInternals.h - Header file for Sparc backend ---------*- C++ -*--=//
-//
-// This file defines stuff that is to be private to the Sparc backend, but is
-// shared among different portions of the backend.
-//
-//===----------------------------------------------------------------------===//
+// $Id$ -*- C++ -*--
+//***************************************************************************
+// File:
+// SparcInternals.h
+//
+// Purpose:
+// This file defines stuff that is to be private to the Sparc
+// backend, but is shared among different portions of the backend.
+//**************************************************************************/
+
#ifndef SPARC_INTERNALS_H
#define SPARC_INTERNALS_H
-
-#include "SparcRegClassInfo.h"
#include "llvm/Target/TargetMachine.h"
#include "llvm/Target/MachineInstrInfo.h"
-
#include "llvm/Target/MachineSchedInfo.h"
-#include "llvm/CodeGen/RegClass.h"
+#include "llvm/Target/MachineFrameInfo.h"
+#include "llvm/Target/MachineCacheInfo.h"
+#include "llvm/Target/MachineRegInfo.h"
#include "llvm/Type.h"
-
#include <sys/types.h>
+class LiveRange;
class UltraSparc;
+class PhyRegAlloc;
+
// OpCodeMask definitions for the Sparc V9
//
class UltraSparcInstrInfo : public MachineInstrInfo {
public:
- /*ctor*/ UltraSparcInstrInfo();
+ /*ctor*/ UltraSparcInstrInfo(const TargetMachine& tgt);
+
+ //
+ // All immediate constants are in position 0 except the
+ // store instructions.
+ //
+ virtual int getImmmedConstantPos(MachineOpCode opCode) const {
+ bool ignore;
+ if (this->maxImmedConstant(opCode, ignore) != 0)
+ {
+ assert(! this->isStore((MachineOpCode) STB - 1)); // first store is STB
+ assert(! this->isStore((MachineOpCode) STD + 1)); // last store is STD
+ return (opCode >= STB || opCode <= STD)? 2 : 1;
+ }
+ else
+ return -1;
+ }
virtual bool hasResultInterlock (MachineOpCode opCode) const
{
//
virtual void CreateCodeToLoadConst(Value* val,
Instruction* dest,
- vector<MachineInstr*>& minstrVec,
- vector<TmpInstruction*>& tempVec) const;
-};
-
-
+ std::vector<MachineInstr*>& minstrVec,
+ std::vector<TmpInstruction*>& tmp) const;
+
+ // Create an instruction sequence to copy an integer value `val'
+ // to a floating point value `dest' by copying to memory and back.
+ // val must be an integral type. dest must be a Float or Double.
+ // The generated instructions are returned in `minstrVec'.
+ // Any temp. registers (TmpInstruction) created are returned in `tempVec'.
+ //
+ virtual void CreateCodeToCopyIntToFloat(Method* method,
+ Value* val,
+ Instruction* dest,
+ std::vector<MachineInstr*>& minstr,
+ std::vector<TmpInstruction*>& temp,
+ TargetMachine& target) const;
+
+ // Similarly, create an instruction sequence to copy an FP value
+ // `val' to an integer value `dest' by copying to memory and back.
+ // See the previous function for information about return values.
+ //
+ virtual void CreateCodeToCopyFloatToInt(Method* method,
+ Value* val,
+ Instruction* dest,
+ std::vector<MachineInstr*>& minstr,
+ std::vector<TmpInstruction*>& temp,
+ TargetMachine& target) const;
+
+ // create copy instruction(s)
+ virtual void
+ CreateCopyInstructionsByType(const TargetMachine& target,
+ Value* src,
+ Instruction* dest,
+ std::vector<MachineInstr*>& minstr) const;
+};
//----------------------------------------------------------------------------
// class UltraSparcRegInfo
//
+// This class implements the virtual class MachineRegInfo for Sparc.
+//
//----------------------------------------------------------------------------
-
-class LiveRange;
-class UltraSparc;
-class PhyRegAlloc;
-
-
-class UltraSparcRegInfo : public MachineRegInfo
-{
-
- private:
-
+class UltraSparcRegInfo : public MachineRegInfo {
// The actual register classes in the Sparc
-
+ //
enum RegClassIDs {
- IntRegClassID,
- FloatRegClassID,
- IntCCRegClassID,
- FloatCCRegClassID
+ IntRegClassID, // Integer
+ FloatRegClassID, // Float (both single/double)
+ IntCCRegClassID, // Int Condition Code
+ FloatCCRegClassID // Float Condition code
};
// Type of registers available in Sparc. There can be several reg types
// in the same class. For instace, the float reg class has Single/Double
// types
+ //
enum RegTypes {
IntRegType,
FPSingleRegType,
FloatCCRegType
};
- // the size of a value (int, float, etc..) stored in the stack frame
-
-
-
- // WARNING: If the above enum order must be changed, also modify
+ // **** WARNING: If the above enum order is changed, also modify
// getRegisterClassOfValue method below since it assumes this particular
// order for efficiency.
// reverse pointer to get info about the ultra sparc machine
+ //
const UltraSparc *const UltraSparcInfo;
- // Both int and float rguments can be passed in 6 int regs -
- // %o0 to %o5 (cannot be changed)
+ // Number of registers used for passing int args (usually 6: %o0 - %o5)
+ //
unsigned const NumOfIntArgRegs;
- unsigned const NumOfFloatArgRegs;
- int const InvalidRegNum;
- int SizeOfOperandOnStack;
-
-
-
- //void setCallArgColor(LiveRange *const LR, const unsigned RegNo) const;
-
- void setCallOrRetArgCol(LiveRange *const LR, const unsigned RegNo,
- const MachineInstr *MI,AddedInstrMapType &AIMap)const;
-
- MachineInstr * getCopy2RegMI(const Value *SrcVal, const unsigned Reg,
- unsigned RegClassID) const ;
-
-
- void suggestReg4RetAddr(const MachineInstr * RetMI,
- LiveRangeInfo& LRI) const;
-
- void suggestReg4CallAddr(const MachineInstr * CallMI, LiveRangeInfo& LRI,
- vector<RegClass *> RCList) const;
-
-
- Value *getValue4ReturnAddr( const MachineInstr * MInst ) const ;
-
- int getRegType(const LiveRange *const LR) const {
-
- unsigned Typ;
-
- switch( (LR->getRegClass())->getID() ) {
-
- case IntRegClassID: return IntRegType;
-
- case FloatRegClassID:
- Typ = LR->getTypeID();
- if( Typ == Type::FloatTyID )
- return FPSingleRegType;
- else if( Typ == Type::DoubleTyID )
- return FPDoubleRegType;
- else assert(0 && "Unknown type in FloatRegClass");
-
- case IntCCRegClassID: return IntCCRegType;
-
- case FloatCCRegClassID: return FloatCCRegType ;
- default: assert( 0 && "Unknown reg class ID");
-
- }
-
- }
-
- int getRegType(const Value *const Val) const {
+ // Number of registers used for passing float args (usually 32: %f0 - %f31)
+ //
+ unsigned const NumOfFloatArgRegs;
- unsigned Typ;
+ // An out of bound register number that can be used to initialize register
+ // numbers. Useful for error detection.
+ //
+ int const InvalidRegNum;
- switch( getRegClassIDOfValue(Val) ) {
- case IntRegClassID: return IntRegType;
+ // ======================== Private Methods =============================
- case FloatRegClassID:
- Typ = (Val->getType())->getPrimitiveID();
- if( Typ == Type::FloatTyID )
- return FPSingleRegType;
- else if( Typ == Type::DoubleTyID )
- return FPDoubleRegType;
- else assert(0 && "Unknown type in FloatRegClass");
+ // The following methods are used to color special live ranges (e.g.
+ // method args and return values etc.) with specific hardware registers
+ // as required. See SparcRegInfo.cpp for the implementation.
+ //
+ void setCallOrRetArgCol(LiveRange *LR, unsigned RegNo,
+ const MachineInstr *MI,
+ std::hash_map<const MachineInstr *,
+ AddedInstrns *> &AIMap) const;
- case IntCCRegClassID: return IntCCRegType;
-
- case FloatCCRegClassID: return FloatCCRegType ;
+ MachineInstr *getCopy2RegMI(const Value *SrcVal, unsigned Reg,
+ unsigned RegClassID) const;
- default: assert( 0 && "Unknown reg class ID");
+ void suggestReg4RetAddr(const MachineInstr *RetMI,
+ LiveRangeInfo &LRI) const;
- }
+ void suggestReg4CallAddr(const MachineInstr *CallMI, LiveRangeInfo &LRI,
+ std::vector<RegClass *> RCList) const;
- }
+ // The following methods are used to find the addresses etc. contained
+ // in specail machine instructions like CALL/RET
+ //
+ Value *getValue4ReturnAddr(const MachineInstr *MInst) const;
+ const Value *getCallInstRetAddr(const MachineInstr *CallMI) const;
+ unsigned getCallInstNumArgs(const MachineInstr *CallMI) const;
- // ***TODO: See this method is necessary
- MachineInstr * cpValue2RegMI(Value * Val, const unsigned DestReg,
- const int RegType) const;
+ // The following 3 methods are used to find the RegType (see enum above)
+ // of a LiveRange, Value and using the unified RegClassID
+ int getRegType(const LiveRange *LR) const;
+ int getRegType(const Value *Val) const;
+ int getRegType(int reg) const;
- const Value *getCallInstRetAddr(const MachineInstr *CallMI) const;
- const unsigned getCallInstNumArgs(const MachineInstr *CallMI) const;
+ // The following methods are used to generate copy instructions to move
+ // data between condition code registers
+ //
+ MachineInstr *cpCCR2IntMI(unsigned IntReg) const;
+ MachineInstr *cpInt2CCRMI(unsigned IntReg) const;
- MachineInstr * cpCCR2IntMI(const unsigned IntReg) const;
- MachineInstr * cpInt2CCRMI(const unsigned IntReg) const;
+ // Used to generate a copy instruction based on the register class of
+ // value.
+ //
+ MachineInstr *cpValue2RegMI(Value *Val, unsigned DestReg,
+ int RegType) const;
- public:
+ // The following 2 methods are used to order the instructions addeed by
+ // the register allocator in association with method calling. See
+ // SparcRegInfo.cpp for more details
+ //
+ void moveInst2OrdVec(std::vector<MachineInstr *> &OrdVec,
+ MachineInstr *UnordInst,
+ PhyRegAlloc &PRA) const;
- UltraSparcRegInfo(const UltraSparc *const USI ) : UltraSparcInfo(USI),
- NumOfIntArgRegs(6),
- NumOfFloatArgRegs(32),
- InvalidRegNum(1000),
- SizeOfOperandOnStack(8)
- {
- MachineRegClassArr.push_back( new SparcIntRegClass(IntRegClassID) );
- MachineRegClassArr.push_back( new SparcFloatRegClass(FloatRegClassID) );
- MachineRegClassArr.push_back( new SparcIntCCRegClass(IntCCRegClassID) );
- MachineRegClassArr.push_back( new SparcFloatCCRegClass(FloatCCRegClassID));
+ void OrderAddedInstrns(std::vector<MachineInstr *> &UnordVec,
+ std::vector<MachineInstr *> &OrdVec,
+ PhyRegAlloc &PRA) const;
- assert( SparcFloatRegOrder::StartOfNonVolatileRegs == 32 &&
- "32 Float regs are used for float arg passing");
- }
+ // To find whether a particular call is to a var arg method
+ //
+ bool isVarArgCall(const MachineInstr *CallMI) const;
- // ***** TODO Delete
- ~UltraSparcRegInfo(void) { } // empty destructor
+public:
+ UltraSparcRegInfo(const UltraSparc &tgt);
- inline const UltraSparc & getUltraSparcInfo() const {
+ // To get complete machine information structure using the machine register
+ // information
+ //
+ inline const UltraSparc &getUltraSparcInfo() const {
return *UltraSparcInfo;
}
+ // To find the register class of a Value
+ //
+ inline unsigned getRegClassIDOfValue(const Value *Val,
+ bool isCCReg = false) const {
-
- inline unsigned getRegClassIDOfValue (const Value *const Val,
- bool isCCReg = false) const {
-
- Type::PrimitiveID ty = (Val->getType())->getPrimitiveID();
-
+ Type::PrimitiveID ty = Val->getType()->getPrimitiveID();
unsigned res;
- if( (ty && ty <= Type::LongTyID) || (ty == Type::LabelTyID) ||
+ if ((ty && ty <= Type::LongTyID) || (ty == Type::LabelTyID) ||
(ty == Type::MethodTyID) || (ty == Type::PointerTyID) )
- res = IntRegClassID; // sparc int reg (ty=0: void)
- else if( ty <= Type::DoubleTyID)
+ res = IntRegClassID; // sparc int reg (ty=0: void)
+ else if (ty <= Type::DoubleTyID)
res = FloatRegClassID; // sparc float reg class
else {
- cerr << "TypeID: " << ty << endl;
+ //std::cerr << "TypeID: " << ty << "\n";
assert(0 && "Cannot resolve register class for type");
+ return 0;
}
if(isCCReg)
return res;
}
- // returns the register tha contains always zero
- // this is the unified register number
- inline int getZeroRegNum() const { return SparcIntRegOrder::g0; }
- // returns the reg used for pushing the address when a method is called.
- // This can be used for other purposes between calls
- unsigned getCallAddressReg() const { return SparcIntRegOrder::o7; }
+ // getZeroRegNum - returns the register that contains always zero this is the
+ // unified register number
+ //
+ virtual int getZeroRegNum() const;
-
- // and when we return from a method. It should be made sure that this
- // register contains the return value when a return instruction is reached.
- unsigned getReturnAddressReg() const { return SparcIntRegOrder::i7; }
+ // getCallAddressReg - returns the reg used for pushing the address when a
+ // method is called. This can be used for other purposes between calls
+ //
+ unsigned getCallAddressReg() const;
- void suggestRegs4MethodArgs(const Method *const Meth,
- LiveRangeInfo& LRI) const;
+ // Returns the register containing the return address.
+ // It should be made sure that this register contains the return
+ // value when a return instruction is reached.
+ //
+ unsigned getReturnAddressReg() const;
- void suggestRegs4CallArgs(const MachineInstr *const CallMI,
- LiveRangeInfo& LRI, vector<RegClass *> RCL) const;
- void suggestReg4RetValue(const MachineInstr *const RetMI,
- LiveRangeInfo& LRI ) const;
+ // The following methods are used to color special live ranges (e.g.
+ // method args and return values etc.) with specific hardware registers
+ // as required. See SparcRegInfo.cpp for the implementation for Sparc.
+ //
+ void suggestRegs4MethodArgs(const Method *Meth,
+ LiveRangeInfo& LRI) const;
- void colorMethodArgs(const Method *const Meth, LiveRangeInfo& LRI,
- AddedInstrns *const FirstAI) const;
+ void suggestRegs4CallArgs(const MachineInstr *CallMI,
+ LiveRangeInfo& LRI,
+ std::vector<RegClass *> RCL) const;
- void colorCallArgs(const MachineInstr *const CallMI, LiveRangeInfo& LRI,
- AddedInstrns *const CallAI, PhyRegAlloc &PRA) const;
+ void suggestReg4RetValue(const MachineInstr *RetMI,
+ LiveRangeInfo& LRI) const;
- void colorRetValue(const MachineInstr *const RetI, LiveRangeInfo& LRI,
- AddedInstrns *const RetAI) const;
+ void colorMethodArgs(const Method *Meth, LiveRangeInfo &LRI,
+ AddedInstrns *FirstAI) const;
- // bool handleSpecialMInstr(const MachineInstr * MInst,
- // LiveRangeInfo& LRI, vector<RegClass *> RCL) const;
+ void colorCallArgs(const MachineInstr *CallMI, LiveRangeInfo &LRI,
+ AddedInstrns *CallAI, PhyRegAlloc &PRA,
+ const BasicBlock *BB) const;
+ void colorRetValue(const MachineInstr *RetI, LiveRangeInfo& LRI,
+ AddedInstrns *RetAI) const;
- static void printReg(const LiveRange *const LR) ;
+
+
+ // method used for printing a register for debugging purposes
+ //
+ static void printReg(const LiveRange *LR);
// this method provides a unique number for each register
+ //
inline int getUnifiedRegNum(int RegClassID, int reg) const {
if( RegClassID == IntRegClassID && reg < 32 )
return InvalidRegNum;
else
assert(0 && "Invalid register class or reg number");
-
+ return 0;
}
// given the unified register number, this gives the name
- inline const string getUnifiedRegName(int reg) const {
- if( reg < 32 )
- return SparcIntRegOrder::getRegName(reg);
- else if ( reg < (64 + 32) )
- return SparcFloatRegOrder::getRegName( reg - 32);
- else if( reg < (64+32+4) )
- return SparcFloatCCRegOrder::getRegName( reg -32 - 64);
- else if( reg < (64+32+4+2) ) // two names: %xcc and %ccr
- return SparcIntCCRegOrder::getRegName( reg -32 - 64 - 4);
- else if (reg== InvalidRegNum) //****** TODO: Remove */
- return "<*NoReg*>";
- else
- assert(0 && "Invalid register number");
- }
+ // for generating assembly code or debugging.
+ //
+ virtual const std::string getUnifiedRegName(int reg) const;
- inline unsigned int getRegNumInCallersWindow(int reg) {
- if (reg == InvalidRegNum || reg >= 32)
- return reg;
- return SparcIntRegOrder::getRegNumInCallersWindow(reg);
- }
-
- inline bool mustBeRemappedInCallersWindow(int reg) {
- return (reg != InvalidRegNum && reg < 32);
+
+ // returns the # of bytes of stack space allocated for each register
+ // type. For Sparc, currently we allocate 8 bytes on stack for all
+ // register types. We can optimize this later if necessary to save stack
+ // space (However, should make sure that stack alignment is correct)
+ //
+ inline int getSpilledRegSize(int RegType) const {
+ return 8;
}
-
+
+
+ // To obtain the return value contained in a CALL machine instruction
+ //
const Value * getCallInstRetVal(const MachineInstr *CallMI) const;
- MachineInstr * cpReg2RegMI(const unsigned SrcReg, const unsigned DestReg,
- const int RegType) const;
- MachineInstr * cpReg2MemMI(const unsigned SrcReg, const unsigned DestPtrReg,
- const int Offset, const int RegType) const;
+ // The following methods are used to generate "copy" machine instructions
+ // for an architecture.
+ //
+ MachineInstr * cpReg2RegMI(unsigned SrcReg, unsigned DestReg,
+ int RegType) const;
- MachineInstr * cpMem2RegMI(const unsigned SrcPtrReg, const int Offset,
- const unsigned DestReg, const int RegType) const;
+ MachineInstr * cpReg2MemMI(unsigned SrcReg, unsigned DestPtrReg,
+ int Offset, int RegType) const;
+
+ MachineInstr * cpMem2RegMI(unsigned SrcPtrReg, int Offset,
+ unsigned DestReg, int RegType) const;
MachineInstr* cpValue2Value(Value *Src, Value *Dest) const;
- inline bool isRegVolatile(const int RegClassID, const int Reg) const {
- return (MachineRegClassArr[RegClassID])->isRegVolatile(Reg);
+ // To see whether a register is a volatile (i.e., whehter it must be
+ // preserved acorss calls)
+ //
+ inline bool isRegVolatile(int RegClassID, int Reg) const {
+ return MachineRegClassArr[RegClassID]->isRegVolatile(Reg);
}
- inline unsigned getFramePointer() const {
- return SparcIntRegOrder::i6;
- }
-
- inline unsigned getStackPointer() const {
- return SparcIntRegOrder::o6;
- }
+ virtual unsigned getFramePointer() const;
+ virtual unsigned getStackPointer() const;
- inline int getInvalidRegNum() const {
+ virtual int getInvalidRegNum() const {
return InvalidRegNum;
}
-
+ // This method inserts the caller saving code for call instructions
+ //
void insertCallerSavingCode(const MachineInstr *MInst,
const BasicBlock *BB, PhyRegAlloc &PRA ) const;
-
-
};
-/*---------------------------------------------------------------------------
-Scheduling guidelines for SPARC IIi:
-
-I-Cache alignment rules (pg 326)
--- Align a branch target instruction so that it's entire group is within
- the same cache line (may be 1-4 instructions).
-** Don't let a branch that is predicted taken be the last instruction
- on an I-cache line: delay slot will need an entire line to be fetched
--- Make a FP instruction or a branch be the 4th instruction in a group.
- For branches, there are tradeoffs in reordering to make this happen
- (see pg. 327).
-** Don't put a branch in a group that crosses a 32-byte boundary!
- An artificial branch is inserted after every 32 bytes, and having
- another branch will force the group to be broken into 2 groups.
-
-iTLB rules:
--- Don't let a loop span two memory pages, if possible
-
-Branch prediction performance:
--- Don't make the branch in a delay slot the target of a branch
--- Try not to have 2 predicted branches within a group of 4 instructions
- (because each such group has a single branch target field).
--- Try to align branches in slots 0, 2, 4 or 6 of a cache line (to avoid
- the wrong prediction bits being used in some cases).
-
-D-Cache timing constraints:
--- Signed int loads of less than 64 bits have 3 cycle latency, not 2
--- All other loads that hit in D-Cache have 2 cycle latency
--- All loads are returned IN ORDER, so a D-Cache miss will delay a later hit
--- Mis-aligned loads or stores cause a trap. In particular, replace
- mis-aligned FP double precision l/s with 2 single-precision l/s.
--- Simulations of integer codes show increase in avg. group size of
- 33% when code (including esp. non-faulting loads) is moved across
- one branch, and 50% across 2 branches.
-
-E-Cache timing constraints:
--- Scheduling for E-cache (D-Cache misses) is effective (due to load buffering)
-
-Store buffer timing constraints:
--- Stores can be executed in same cycle as instruction producing the value
--- Stores are buffered and have lower priority for E-cache until
- highwater mark is reached in the store buffer (5 stores)
-
-Pipeline constraints:
--- Shifts can only use IEU0.
--- CC setting instructions can only use IEU1.
--- Several other instructions must only use IEU1:
- EDGE(?), ARRAY(?), CALL, JMPL, BPr, PST, and FCMP.
--- Two instructions cannot store to the same register file in a single cycle
- (single write port per file).
-
-Issue and grouping constraints:
--- FP and branch instructions must use slot 4.
--- Shift instructions cannot be grouped with other IEU0-specific instructions.
--- CC setting instructions cannot be grouped with other IEU1-specific instrs.
--- Several instructions must be issued in a single-instruction group:
- MOVcc or MOVr, MULs/x and DIVs/x, SAVE/RESTORE, many others
--- A CALL or JMPL breaks a group, ie, is not combined with subsequent instrs.
---
---
-
-Branch delay slot scheduling rules:
--- A CTI couple (two back-to-back CTI instructions in the dynamic stream)
- has a 9-instruction penalty: the entire pipeline is flushed when the
- second instruction reaches stage 9 (W-Writeback).
--- Avoid putting multicycle instructions, and instructions that may cause
- load misses, in the delay slot of an annulling branch.
--- Avoid putting WR, SAVE..., RESTORE and RETURN instructions in the
- delay slot of an annulling branch.
-
- *--------------------------------------------------------------------------- */
//---------------------------------------------------------------------------
-// List of CPUResources for UltraSPARC IIi.
+// class UltraSparcSchedInfo
+//
+// Purpose:
+// Interface to instruction scheduling information for UltraSPARC.
+// The parameter values above are based on UltraSPARC IIi.
//---------------------------------------------------------------------------
-const CPUResource AllIssueSlots( "All Instr Slots", 4);
-const CPUResource IntIssueSlots( "Int Instr Slots", 3);
-const CPUResource First3IssueSlots("Instr Slots 0-3", 3);
-const CPUResource LSIssueSlots( "Load-Store Instr Slot", 1);
-const CPUResource CTIIssueSlots( "Ctrl Transfer Instr Slot", 1);
-const CPUResource FPAIssueSlots( "Int Instr Slot 1", 1);
-const CPUResource FPMIssueSlots( "Int Instr Slot 1", 1);
-// IEUN instructions can use either Alu and should use IAluN.
-// IEU0 instructions must use Alu 1 and should use both IAluN and IAlu0.
-// IEU1 instructions must use Alu 2 and should use both IAluN and IAlu1.
-const CPUResource IAluN("Int ALU 1or2", 2);
-const CPUResource IAlu0("Int ALU 1", 1);
-const CPUResource IAlu1("Int ALU 2", 1);
-
-const CPUResource LSAluC1("Load/Store Unit Addr Cycle", 1);
-const CPUResource LSAluC2("Load/Store Unit Issue Cycle", 1);
-const CPUResource LdReturn("Load Return Unit", 1);
-
-const CPUResource FPMAluC1("FP Mul/Div Alu Cycle 1", 1);
-const CPUResource FPMAluC2("FP Mul/Div Alu Cycle 2", 1);
-const CPUResource FPMAluC3("FP Mul/Div Alu Cycle 3", 1);
-
-const CPUResource FPAAluC1("FP Other Alu Cycle 1", 1);
-const CPUResource FPAAluC2("FP Other Alu Cycle 2", 1);
-const CPUResource FPAAluC3("FP Other Alu Cycle 3", 1);
-
-const CPUResource IRegReadPorts("Int Reg ReadPorts", INT_MAX); // CHECK
-const CPUResource IRegWritePorts("Int Reg WritePorts", 2); // CHECK
-const CPUResource FPRegReadPorts("FP Reg Read Ports", INT_MAX); // CHECK
-const CPUResource FPRegWritePorts("FP Reg Write Ports", 1); // CHECK
-
-const CPUResource CTIDelayCycle( "CTI delay cycle", 1);
-const CPUResource FCMPDelayCycle("FCMP delay cycle", 1);
+class UltraSparcSchedInfo: public MachineSchedInfo {
+public:
+ UltraSparcSchedInfo(const TargetMachine &tgt);
+protected:
+ virtual void initializeResources();
+};
//---------------------------------------------------------------------------
-// const InstrClassRUsage SparcRUsageDesc[]
+// class UltraSparcFrameInfo
//
// Purpose:
-// Resource usage information for instruction in each scheduling class.
-// The InstrRUsage Objects for individual classes are specified first.
-// Note that fetch and decode are decoupled from the execution pipelines
-// via an instr buffer, so they are not included in the cycles below.
+// Interface to stack frame layout info for the UltraSPARC.
+// Starting offsets for each area of the stack frame are aligned at
+// a multiple of getStackFrameSizeAlignment().
//---------------------------------------------------------------------------
-const InstrClassRUsage NoneClassRUsage = {
- SPARC_NONE,
- /*totCycles*/ 7,
-
- /* maxIssueNum */ 4,
- /* isSingleIssue */ false,
- /* breaksGroup */ false,
- /* numBubbles */ 0,
-
- /*numSlots*/ 4,
- /* feasibleSlots[] */ { 0, 1, 2, 3 },
+class UltraSparcFrameInfo: public MachineFrameInfo {
+public:
+ UltraSparcFrameInfo(const TargetMachine &tgt) : MachineFrameInfo(tgt) {}
- /*numEntries*/ 0,
- /* V[] */ {
- /*Cycle G */
- /*Ccle E */
- /*Cycle C */
- /*Cycle N1*/
- /*Cycle N1*/
- /*Cycle N1*/
- /*Cycle W */
- }
-};
+public:
+ int getStackFrameSizeAlignment () const { return StackFrameSizeAlignment;}
+ int getMinStackFrameSize () const { return MinStackFrameSize; }
+ int getNumFixedOutgoingArgs () const { return NumFixedOutgoingArgs; }
+ int getSizeOfEachArgOnStack () const { return SizeOfEachArgOnStack; }
+ bool argsOnStackHaveFixedSize () const { return true; }
-const InstrClassRUsage IEUNClassRUsage = {
- SPARC_IEUN,
- /*totCycles*/ 7,
-
- /* maxIssueNum */ 3,
- /* isSingleIssue */ false,
- /* breaksGroup */ false,
- /* numBubbles */ 0,
-
- /*numSlots*/ 3,
- /* feasibleSlots[] */ { 0, 1, 2 },
-
- /*numEntries*/ 4,
- /* V[] */ {
- /*Cycle G */ { AllIssueSlots.rid, 0, 1 },
- { IntIssueSlots.rid, 0, 1 },
- /*Cycle E */ { IAluN.rid, 1, 1 },
- /*Cycle C */
- /*Cycle N1*/
- /*Cycle N1*/
- /*Cycle N1*/
- /*Cycle W */ { IRegWritePorts.rid, 6, 1 }
+ //
+ // These methods compute offsets using the frame contents for a
+ // particular method. The frame contents are obtained from the
+ // MachineCodeInfoForMethod object for the given method.
+ //
+ int getFirstIncomingArgOffset (MachineCodeForMethod& mcInfo,
+ bool& pos) const
+ {
+ pos = true; // arguments area grows upwards
+ return FirstIncomingArgOffsetFromFP;
}
-};
-
-const InstrClassRUsage IEU0ClassRUsage = {
- SPARC_IEU0,
- /*totCycles*/ 7,
-
- /* maxIssueNum */ 1,
- /* isSingleIssue */ false,
- /* breaksGroup */ false,
- /* numBubbles */ 0,
-
- /*numSlots*/ 3,
- /* feasibleSlots[] */ { 0, 1, 2 },
-
- /*numEntries*/ 5,
- /* V[] */ {
- /*Cycle G */ { AllIssueSlots.rid, 0, 1 },
- { IntIssueSlots.rid, 0, 1 },
- /*Cycle E */ { IAluN.rid, 1, 1 },
- { IAlu0.rid, 1, 1 },
- /*Cycle C */
- /*Cycle N1*/
- /*Cycle N1*/
- /*Cycle N1*/
- /*Cycle W */ { IRegWritePorts.rid, 6, 1 }
+ int getFirstOutgoingArgOffset (MachineCodeForMethod& mcInfo,
+ bool& pos) const
+ {
+ pos = true; // arguments area grows upwards
+ return FirstOutgoingArgOffsetFromSP;
}
-};
-
-const InstrClassRUsage IEU1ClassRUsage = {
- SPARC_IEU1,
- /*totCycles*/ 7,
-
- /* maxIssueNum */ 1,
- /* isSingleIssue */ false,
- /* breaksGroup */ false,
- /* numBubbles */ 0,
-
- /*numSlots*/ 3,
- /* feasibleSlots[] */ { 0, 1, 2 },
-
- /*numEntries*/ 5,
- /* V[] */ {
- /*Cycle G */ { AllIssueSlots.rid, 0, 1 },
- { IntIssueSlots.rid, 0, 1 },
- /*Cycle E */ { IAluN.rid, 1, 1 },
- { IAlu1.rid, 1, 1 },
- /*Cycle C */
- /*Cycle N1*/
- /*Cycle N1*/
- /*Cycle N1*/
- /*Cycle W */ { IRegWritePorts.rid, 6, 1 }
+ int getFirstOptionalOutgoingArgOffset(MachineCodeForMethod& mcInfo,
+ bool& pos)const
+ {
+ pos = true; // arguments area grows upwards
+ return FirstOptionalOutgoingArgOffsetFromSP;
}
-};
-
-const InstrClassRUsage FPMClassRUsage = {
- SPARC_FPM,
- /*totCycles*/ 7,
- /* maxIssueNum */ 1,
- /* isSingleIssue */ false,
- /* breaksGroup */ false,
- /* numBubbles */ 0,
-
- /*numSlots*/ 4,
- /* feasibleSlots[] */ { 0, 1, 2, 3 },
-
- /*numEntries*/ 7,
- /* V[] */ {
- /*Cycle G */ { AllIssueSlots.rid, 0, 1 },
- { FPMIssueSlots.rid, 0, 1 },
- /*Cycle E */ { FPRegReadPorts.rid, 1, 1 },
- /*Cycle C */ { FPMAluC1.rid, 2, 1 },
- /*Cycle N1*/ { FPMAluC2.rid, 3, 1 },
- /*Cycle N1*/ { FPMAluC3.rid, 4, 1 },
- /*Cycle N1*/
- /*Cycle W */ { FPRegWritePorts.rid, 6, 1 }
- }
-};
+ int getFirstAutomaticVarOffset (MachineCodeForMethod& mcInfo,
+ bool& pos) const;
+ int getRegSpillAreaOffset (MachineCodeForMethod& mcInfo,
+ bool& pos) const;
+ int getTmpAreaOffset (MachineCodeForMethod& mcInfo,
+ bool& pos) const;
+ int getDynamicAreaOffset (MachineCodeForMethod& mcInfo,
+ bool& pos) const;
-const InstrClassRUsage FPAClassRUsage = {
- SPARC_FPA,
- /*totCycles*/ 7,
-
- /* maxIssueNum */ 1,
- /* isSingleIssue */ false,
- /* breaksGroup */ false,
- /* numBubbles */ 0,
-
- /*numSlots*/ 4,
- /* feasibleSlots[] */ { 0, 1, 2, 3 },
-
- /*numEntries*/ 7,
- /* V[] */ {
- /*Cycle G */ { AllIssueSlots.rid, 0, 1 },
- { FPAIssueSlots.rid, 0, 1 },
- /*Cycle E */ { FPRegReadPorts.rid, 1, 1 },
- /*Cycle C */ { FPAAluC1.rid, 2, 1 },
- /*Cycle N1*/ { FPAAluC2.rid, 3, 1 },
- /*Cycle N1*/ { FPAAluC3.rid, 4, 1 },
- /*Cycle N1*/
- /*Cycle W */ { FPRegWritePorts.rid, 6, 1 }
+ //
+ // These methods specify the base register used for each stack area
+ // (generally FP or SP)
+ //
+ virtual int getIncomingArgBaseRegNum() const {
+ return (int) target.getRegInfo().getFramePointer();
}
-};
-
-const InstrClassRUsage LDClassRUsage = {
- SPARC_LD,
- /*totCycles*/ 7,
-
- /* maxIssueNum */ 1,
- /* isSingleIssue */ false,
- /* breaksGroup */ false,
- /* numBubbles */ 0,
-
- /*numSlots*/ 3,
- /* feasibleSlots[] */ { 0, 1, 2, },
-
- /*numEntries*/ 6,
- /* V[] */ {
- /*Cycle G */ { AllIssueSlots.rid, 0, 1 },
- { First3IssueSlots.rid, 0, 1 },
- { LSIssueSlots.rid, 0, 1 },
- /*Cycle E */ { LSAluC1.rid, 1, 1 },
- /*Cycle C */ { LSAluC2.rid, 2, 1 },
- { LdReturn.rid, 2, 1 },
- /*Cycle N1*/
- /*Cycle N1*/
- /*Cycle N1*/
- /*Cycle W */ { IRegWritePorts.rid, 6, 1 }
+ virtual int getOutgoingArgBaseRegNum() const {
+ return (int) target.getRegInfo().getStackPointer();
}
-};
-
-const InstrClassRUsage STClassRUsage = {
- SPARC_ST,
- /*totCycles*/ 7,
-
- /* maxIssueNum */ 1,
- /* isSingleIssue */ false,
- /* breaksGroup */ false,
- /* numBubbles */ 0,
-
- /*numSlots*/ 3,
- /* feasibleSlots[] */ { 0, 1, 2 },
-
- /*numEntries*/ 4,
- /* V[] */ {
- /*Cycle G */ { AllIssueSlots.rid, 0, 1 },
- { First3IssueSlots.rid, 0, 1 },
- { LSIssueSlots.rid, 0, 1 },
- /*Cycle E */ { LSAluC1.rid, 1, 1 },
- /*Cycle C */ { LSAluC2.rid, 2, 1 }
- /*Cycle N1*/
- /*Cycle N1*/
- /*Cycle N1*/
- /*Cycle W */
+ virtual int getOptionalOutgoingArgBaseRegNum() const {
+ return (int) target.getRegInfo().getStackPointer();
}
-};
-
-const InstrClassRUsage CTIClassRUsage = {
- SPARC_CTI,
- /*totCycles*/ 7,
-
- /* maxIssueNum */ 1,
- /* isSingleIssue */ false,
- /* breaksGroup */ false,
- /* numBubbles */ 0,
-
- /*numSlots*/ 4,
- /* feasibleSlots[] */ { 0, 1, 2, 3 },
-
- /*numEntries*/ 4,
- /* V[] */ {
- /*Cycle G */ { AllIssueSlots.rid, 0, 1 },
- { CTIIssueSlots.rid, 0, 1 },
- /*Cycle E */ { IAlu0.rid, 1, 1 },
- /*Cycles E-C */ { CTIDelayCycle.rid, 1, 2 }
- /*Cycle C */
- /*Cycle N1*/
- /*Cycle N1*/
- /*Cycle N1*/
- /*Cycle W */
+ virtual int getAutomaticVarBaseRegNum() const {
+ return (int) target.getRegInfo().getFramePointer();
}
-};
-
-const InstrClassRUsage SingleClassRUsage = {
- SPARC_SINGLE,
- /*totCycles*/ 7,
-
- /* maxIssueNum */ 1,
- /* isSingleIssue */ true,
- /* breaksGroup */ false,
- /* numBubbles */ 0,
-
- /*numSlots*/ 1,
- /* feasibleSlots[] */ { 0 },
-
- /*numEntries*/ 5,
- /* V[] */ {
- /*Cycle G */ { AllIssueSlots.rid, 0, 1 },
- { AllIssueSlots.rid, 0, 1 },
- { AllIssueSlots.rid, 0, 1 },
- { AllIssueSlots.rid, 0, 1 },
- /*Cycle E */ { IAlu0.rid, 1, 1 }
- /*Cycle C */
- /*Cycle N1*/
- /*Cycle N1*/
- /*Cycle N1*/
- /*Cycle W */
+ virtual int getRegSpillAreaBaseRegNum() const {
+ return (int) target.getRegInfo().getFramePointer();
+ }
+ virtual int getDynamicAreaBaseRegNum() const {
+ return (int) target.getRegInfo().getStackPointer();
}
-};
-
-
-const InstrClassRUsage SparcRUsageDesc[] = {
- NoneClassRUsage,
- IEUNClassRUsage,
- IEU0ClassRUsage,
- IEU1ClassRUsage,
- FPMClassRUsage,
- FPAClassRUsage,
- CTIClassRUsage,
- LDClassRUsage,
- STClassRUsage,
- SingleClassRUsage
-};
-
-
-//---------------------------------------------------------------------------
-// const InstrIssueDelta SparcInstrIssueDeltas[]
-//
-// Purpose:
-// Changes to issue restrictions information in InstrClassRUsage for
-// instructions that differ from other instructions in their class.
-//---------------------------------------------------------------------------
-
-const InstrIssueDelta SparcInstrIssueDeltas[] = {
-
- // opCode, isSingleIssue, breaksGroup, numBubbles
-
- // Special cases for single-issue only
- // Other single issue cases are below.
-//{ LDDA, true, true, 0 },
-//{ STDA, true, true, 0 },
-//{ LDDF, true, true, 0 },
-//{ LDDFA, true, true, 0 },
- { ADDC, true, true, 0 },
- { ADDCcc, true, true, 0 },
- { SUBC, true, true, 0 },
- { SUBCcc, true, true, 0 },
-//{ LDSTUB, true, true, 0 },
-//{ SWAP, true, true, 0 },
-//{ SWAPA, true, true, 0 },
-//{ CAS, true, true, 0 },
-//{ CASA, true, true, 0 },
-//{ CASX, true, true, 0 },
-//{ CASXA, true, true, 0 },
-//{ LDFSR, true, true, 0 },
-//{ LDFSRA, true, true, 0 },
-//{ LDXFSR, true, true, 0 },
-//{ LDXFSRA, true, true, 0 },
-//{ STFSR, true, true, 0 },
-//{ STFSRA, true, true, 0 },
-//{ STXFSR, true, true, 0 },
-//{ STXFSRA, true, true, 0 },
-//{ SAVED, true, true, 0 },
-//{ RESTORED, true, true, 0 },
-//{ FLUSH, true, true, 9 },
-//{ FLUSHW, true, true, 9 },
-//{ ALIGNADDR, true, true, 0 },
- { RETURN, true, true, 0 },
-//{ DONE, true, true, 0 },
-//{ RETRY, true, true, 0 },
-//{ TCC, true, true, 0 },
-//{ SHUTDOWN, true, true, 0 },
-
- // Special cases for breaking group *before*
- // CURRENTLY NOT SUPPORTED!
- { CALL, false, false, 0 },
- { JMPLCALL, false, false, 0 },
- { JMPLRET, false, false, 0 },
-
- // Special cases for breaking the group *after*
- { MULX, true, true, (4+34)/2 },
- { FDIVS, false, true, 0 },
- { FDIVD, false, true, 0 },
- { FDIVQ, false, true, 0 },
- { FSQRTS, false, true, 0 },
- { FSQRTD, false, true, 0 },
- { FSQRTQ, false, true, 0 },
-//{ FCMP{LE,GT,NE,EQ}, false, true, 0 },
-
- // Instructions that introduce bubbles
-//{ MULScc, true, true, 2 },
-//{ SMULcc, true, true, (4+18)/2 },
-//{ UMULcc, true, true, (4+19)/2 },
- { SDIVX, true, true, 68 },
- { UDIVX, true, true, 68 },
-//{ SDIVcc, true, true, 36 },
-//{ UDIVcc, true, true, 37 },
- { WRCCR, true, true, 4 },
-//{ WRPR, true, true, 4 },
-//{ RDCCR, true, true, 0 }, // no bubbles after, but see below
-//{ RDPR, true, true, 0 },
-};
-
-
-//---------------------------------------------------------------------------
-// const InstrRUsageDelta SparcInstrUsageDeltas[]
-//
-// Purpose:
-// Changes to resource usage information in InstrClassRUsage for
-// instructions that differ from other instructions in their class.
-//---------------------------------------------------------------------------
-
-const InstrRUsageDelta SparcInstrUsageDeltas[] = {
-
- // MachineOpCode, Resource, Start cycle, Num cycles
-
- //
- // JMPL counts as a load/store instruction for issue!
- //
- { JMPLCALL, LSIssueSlots.rid, 0, 1 },
- { JMPLRET, LSIssueSlots.rid, 0, 1 },
-
- //
- // Many instructions cannot issue for the next 2 cycles after an FCMP
- // We model that with a fake resource FCMPDelayCycle.
- //
- { FCMPS, FCMPDelayCycle.rid, 1, 3 },
- { FCMPD, FCMPDelayCycle.rid, 1, 3 },
- { FCMPQ, FCMPDelayCycle.rid, 1, 3 },
-
- { MULX, FCMPDelayCycle.rid, 1, 1 },
- { SDIVX, FCMPDelayCycle.rid, 1, 1 },
- { UDIVX, FCMPDelayCycle.rid, 1, 1 },
-//{ SMULcc, FCMPDelayCycle.rid, 1, 1 },
-//{ UMULcc, FCMPDelayCycle.rid, 1, 1 },
-//{ SDIVcc, FCMPDelayCycle.rid, 1, 1 },
-//{ UDIVcc, FCMPDelayCycle.rid, 1, 1 },
- { STD, FCMPDelayCycle.rid, 1, 1 },
- { FMOVRSZ, FCMPDelayCycle.rid, 1, 1 },
- { FMOVRSLEZ,FCMPDelayCycle.rid, 1, 1 },
- { FMOVRSLZ, FCMPDelayCycle.rid, 1, 1 },
- { FMOVRSNZ, FCMPDelayCycle.rid, 1, 1 },
- { FMOVRSGZ, FCMPDelayCycle.rid, 1, 1 },
- { FMOVRSGEZ,FCMPDelayCycle.rid, 1, 1 },
-
- //
- // Some instructions are stalled in the GROUP stage if a CTI is in
- // the E or C stage. We model that with a fake resource CTIDelayCycle.
- //
- { LDD, CTIDelayCycle.rid, 1, 1 },
-//{ LDDA, CTIDelayCycle.rid, 1, 1 },
-//{ LDDSTUB, CTIDelayCycle.rid, 1, 1 },
-//{ LDDSTUBA, CTIDelayCycle.rid, 1, 1 },
-//{ SWAP, CTIDelayCycle.rid, 1, 1 },
-//{ SWAPA, CTIDelayCycle.rid, 1, 1 },
-//{ CAS, CTIDelayCycle.rid, 1, 1 },
-//{ CASA, CTIDelayCycle.rid, 1, 1 },
-//{ CASX, CTIDelayCycle.rid, 1, 1 },
-//{ CASXA, CTIDelayCycle.rid, 1, 1 },
-
- //
- // Signed int loads of less than dword size return data in cycle N1 (not C)
- // and put all loads in consecutive cycles into delayed load return mode.
- //
- { LDSB, LdReturn.rid, 2, -1 },
- { LDSB, LdReturn.rid, 3, 1 },
-
- { LDSH, LdReturn.rid, 2, -1 },
- { LDSH, LdReturn.rid, 3, 1 },
-
- { LDSW, LdReturn.rid, 2, -1 },
- { LDSW, LdReturn.rid, 3, 1 },
-
- //
- // RDPR from certain registers and RD from any register are not dispatchable
- // until four clocks after they reach the head of the instr. buffer.
- // Together with their single-issue requirement, this means all four issue
- // slots are effectively blocked for those cycles, plus the issue cycle.
- // This does not increase the latency of the instruction itself.
- //
- { RDCCR, AllIssueSlots.rid, 0, 5 },
- { RDCCR, AllIssueSlots.rid, 0, 5 },
- { RDCCR, AllIssueSlots.rid, 0, 5 },
- { RDCCR, AllIssueSlots.rid, 0, 5 },
-
-#undef EXPLICIT_BUBBLES_NEEDED
-#ifdef EXPLICIT_BUBBLES_NEEDED
- //
- // MULScc inserts one bubble.
- // This means it breaks the current group (captured in UltraSparcSchedInfo)
- // *and occupies all issue slots for the next cycle
- //
-//{ MULScc, AllIssueSlots.rid, 2, 2-1 },
-//{ MULScc, AllIssueSlots.rid, 2, 2-1 },
-//{ MULScc, AllIssueSlots.rid, 2, 2-1 },
-//{ MULScc, AllIssueSlots.rid, 2, 2-1 },
-
- //
- // SMULcc inserts between 4 and 18 bubbles, depending on #leading 0s in rs1.
- // We just model this with a simple average.
- //
-//{ SMULcc, AllIssueSlots.rid, 2, ((4+18)/2)-1 },
-//{ SMULcc, AllIssueSlots.rid, 2, ((4+18)/2)-1 },
-//{ SMULcc, AllIssueSlots.rid, 2, ((4+18)/2)-1 },
-//{ SMULcc, AllIssueSlots.rid, 2, ((4+18)/2)-1 },
-
- // SMULcc inserts between 4 and 19 bubbles, depending on #leading 0s in rs1.
-//{ UMULcc, AllIssueSlots.rid, 2, ((4+19)/2)-1 },
-//{ UMULcc, AllIssueSlots.rid, 2, ((4+19)/2)-1 },
-//{ UMULcc, AllIssueSlots.rid, 2, ((4+19)/2)-1 },
-//{ UMULcc, AllIssueSlots.rid, 2, ((4+19)/2)-1 },
-
- //
- // MULX inserts between 4 and 34 bubbles, depending on #leading 0s in rs1.
- //
- { MULX, AllIssueSlots.rid, 2, ((4+34)/2)-1 },
- { MULX, AllIssueSlots.rid, 2, ((4+34)/2)-1 },
- { MULX, AllIssueSlots.rid, 2, ((4+34)/2)-1 },
- { MULX, AllIssueSlots.rid, 2, ((4+34)/2)-1 },
-
- //
- // SDIVcc inserts 36 bubbles.
- //
-//{ SDIVcc, AllIssueSlots.rid, 2, 36-1 },
-//{ SDIVcc, AllIssueSlots.rid, 2, 36-1 },
-//{ SDIVcc, AllIssueSlots.rid, 2, 36-1 },
-//{ SDIVcc, AllIssueSlots.rid, 2, 36-1 },
-
- // UDIVcc inserts 37 bubbles.
-//{ UDIVcc, AllIssueSlots.rid, 2, 37-1 },
-//{ UDIVcc, AllIssueSlots.rid, 2, 37-1 },
-//{ UDIVcc, AllIssueSlots.rid, 2, 37-1 },
-//{ UDIVcc, AllIssueSlots.rid, 2, 37-1 },
-
- //
- // SDIVX inserts 68 bubbles.
- //
- { SDIVX, AllIssueSlots.rid, 2, 68-1 },
- { SDIVX, AllIssueSlots.rid, 2, 68-1 },
- { SDIVX, AllIssueSlots.rid, 2, 68-1 },
- { SDIVX, AllIssueSlots.rid, 2, 68-1 },
-
- //
- // UDIVX inserts 68 bubbles.
- //
- { UDIVX, AllIssueSlots.rid, 2, 68-1 },
- { UDIVX, AllIssueSlots.rid, 2, 68-1 },
- { UDIVX, AllIssueSlots.rid, 2, 68-1 },
- { UDIVX, AllIssueSlots.rid, 2, 68-1 },
-
- //
- // WR inserts 4 bubbles.
- //
-//{ WR, AllIssueSlots.rid, 2, 68-1 },
-//{ WR, AllIssueSlots.rid, 2, 68-1 },
-//{ WR, AllIssueSlots.rid, 2, 68-1 },
-//{ WR, AllIssueSlots.rid, 2, 68-1 },
-
- //
- // WRPR inserts 4 bubbles.
- //
-//{ WRPR, AllIssueSlots.rid, 2, 68-1 },
-//{ WRPR, AllIssueSlots.rid, 2, 68-1 },
-//{ WRPR, AllIssueSlots.rid, 2, 68-1 },
-//{ WRPR, AllIssueSlots.rid, 2, 68-1 },
-
- //
- // DONE inserts 9 bubbles.
- //
-//{ DONE, AllIssueSlots.rid, 2, 9-1 },
-//{ DONE, AllIssueSlots.rid, 2, 9-1 },
-//{ DONE, AllIssueSlots.rid, 2, 9-1 },
-//{ DONE, AllIssueSlots.rid, 2, 9-1 },
- //
- // RETRY inserts 9 bubbles.
- //
-//{ RETRY, AllIssueSlots.rid, 2, 9-1 },
-//{ RETRY, AllIssueSlots.rid, 2, 9-1 },
-//{ RETRY, AllIssueSlots.rid, 2, 9-1 },
-//{ RETRY, AllIssueSlots.rid, 2, 9-1 },
-
-#endif /*EXPLICIT_BUBBLES_NEEDED */
-};
-
-
-
-// Additional delays to be captured in code:
-// 1. RDPR from several state registers (page 349)
-// 2. RD from *any* register (page 349)
-// 3. Writes to TICK, PSTATE, TL registers and FLUSH{W} instr (page 349)
-// 4. Integer store can be in same group as instr producing value to store.
-// 5. BICC and BPICC can be in the same group as instr producing CC (pg 350)
-// 6. FMOVr cannot be in the same or next group as an IEU instr (pg 351).
-// 7. The second instr. of a CTI group inserts 9 bubbles (pg 351)
-// 8. WR{PR}, SVAE, SAVED, RESTORE, RESTORED, RETURN, RETRY, and DONE that
-// follow an annulling branch cannot be issued in the same group or in
-// the 3 groups following the branch.
-// 9. A predicted annulled load does not stall dependent instructions.
-// Other annulled delay slot instructions *do* stall dependents, so
-// nothing special needs to be done for them during scheduling.
-//10. Do not put a load use that may be annulled in the same group as the
-// branch. The group will stall until the load returns.
-//11. Single-prec. FP loads lock 2 registers, for dependency checking.
-//
-//
-// Additional delays we cannot or will not capture:
-// 1. If DCTI is last word of cache line, it is delayed until next line can be
-// fetched. Also, other DCTI alignment-related delays (pg 352)
-// 2. Load-after-store is delayed by 7 extra cycles if load hits in D-Cache.
-// Also, several other store-load and load-store conflicts (pg 358)
-// 3. MEMBAR, LD{X}FSR, LDD{A} and a bunch of other load stalls (pg 358)
-// 4. There can be at most 8 outstanding buffered store instructions
-// (including some others like MEMBAR, LDSTUB, CAS{AX}, and FLUSH)
-
-
-
-//---------------------------------------------------------------------------
-// class UltraSparcSchedInfo
-//
-// Purpose:
-// Interface to instruction scheduling information for UltraSPARC.
-// The parameter values above are based on UltraSPARC IIi.
-//---------------------------------------------------------------------------
-
-
-class UltraSparcSchedInfo: public MachineSchedInfo {
-public:
- /*ctor*/ UltraSparcSchedInfo (const MachineInstrInfo* mii);
- /*dtor*/ virtual ~UltraSparcSchedInfo () {}
-protected:
- virtual void initializeResources ();
+private:
+ // All stack addresses must be offset by 0x7ff (2047) on Sparc V9.
+ static const int OFFSET = (int) 0x7ff;
+ static const int StackFrameSizeAlignment = 16;
+ static const int MinStackFrameSize = 176;
+ static const int NumFixedOutgoingArgs = 6;
+ static const int SizeOfEachArgOnStack = 8;
+ static const int StaticAreaOffsetFromFP = 0 + OFFSET;
+ static const int FirstIncomingArgOffsetFromFP = 128 + OFFSET;
+ static const int FirstOptionalIncomingArgOffsetFromFP = 176 + OFFSET;
+ static const int FirstOutgoingArgOffsetFromSP = 128 + OFFSET;
+ static const int FirstOptionalOutgoingArgOffsetFromSP = 176 + OFFSET;
};
//---------------------------------------------------------------------------
-// class UltraSparcFrameInfo
+// class UltraSparcCacheInfo
//
// Purpose:
-// Interface to stack frame layout info for the UltraSPARC.
-// Note that there is no machine-independent interface to this information
+// Interface to cache parameters for the UltraSPARC.
+// Just use defaults for now.
//---------------------------------------------------------------------------
-class UltraSparcFrameInfo: public NonCopyable {
+class UltraSparcCacheInfo: public MachineCacheInfo {
public:
- static const int MinStackFrameSize = 176;
- static const int FirstOutgoingArgOffsetFromSP = 128;
- static const int FirstOptionalOutgoingArgOffsetFromSP = 176;
- static const int StaticStackAreaOffsetFromFP = -1;
-
- static const int FirstIncomingArgOffsetFromFP = 126;
-
- static int getFirstAutomaticVarOffsetFromFP (const Method* method);
- static int getRegSpillAreaOffsetFromFP (const Method* method);
- static int getFrameSizeBelowDynamicArea (const Method* method);
+ UltraSparcCacheInfo(const TargetMachine &T) : MachineCacheInfo(T) {}
};
-
//---------------------------------------------------------------------------
// class UltraSparcMachine
//
UltraSparcSchedInfo schedInfo;
UltraSparcRegInfo regInfo;
UltraSparcFrameInfo frameInfo;
+ UltraSparcCacheInfo cacheInfo;
public:
UltraSparc();
- virtual ~UltraSparc() {}
virtual const MachineInstrInfo &getInstrInfo() const { return instrInfo; }
virtual const MachineSchedInfo &getSchedInfo() const { return schedInfo; }
virtual const MachineRegInfo &getRegInfo() const { return regInfo; }
- const UltraSparcFrameInfo &getFrameInfo() const { return frameInfo; }
-
-
- // compileMethod - For the sparc, we do instruction selection, followed by
- // delay slot scheduling, then register allocation.
- //
- virtual bool compileMethod(Method *M);
+ virtual const MachineFrameInfo &getFrameInfo() const { return frameInfo; }
+ virtual const MachineCacheInfo &getCacheInfo() const { return cacheInfo; }
//
- // emitAssembly - Output assembly language code (a .s file) for the specified
- // module. The specified module must have been compiled before this may be
- // used.
+ // addPassesToEmitAssembly - Add passes to the specified pass manager to get
+ // assembly langage code emited. For sparc, we have to do ...
//
- virtual void emitAssembly(const Module *M, ostream &OutStr) const;
-};
+ virtual void addPassesToEmitAssembly(PassManager &PM, std::ostream &Out);
+private:
+ Pass *getMethodAsmPrinterPass(PassManager &PM, std::ostream &Out);
+ Pass *getModuleAsmPrinterPass(PassManager &PM, std::ostream &Out);
+ Pass *getEmitBytecodeToAsmPass(std::ostream &Out);
+};
#endif