-//===- Target.td - Target Independent TableGen interface --------*- C++ -*-===//
+//===- Target.td - Target Independent TableGen interface ---*- tablegen -*-===//
+//
+// The LLVM Compiler Infrastructure
+//
+// This file was developed by the LLVM research group and is distributed under
+// the University of Illinois Open Source License. See LICENSE.TXT for details.
+//
+//===----------------------------------------------------------------------===//
//
// This file defines the target-independent interfaces which should be
// implemented by each target which is using a TableGen based code generator.
//
//===----------------------------------------------------------------------===//
-
-//===----------------------------------------------------------------------===//
-//
-// Value types - These values correspond to the register types defined in the
-// ValueTypes.h file.
-//
-class ValueType<int size> { string Namespace = "MVT"; int Size = size; }
-
-def i1 : ValueType<1>; // One bit boolean value
-def i8 : ValueType<8>; // 8-bit integer value
-def i16 : ValueType<16>; // 16-bit integer value
-def i32 : ValueType<32>; // 32-bit integer value
-def i64 : ValueType<64>; // 64-bit integer value
-def i128 : ValueType<128>; // 128-bit integer value
-def f32 : ValueType<32>; // 32-bit floating point value
-def f64 : ValueType<64>; // 64-bit floating point value
-def f80 : ValueType<80>; // 80-bit floating point value
-def f128 : ValueType<128>; // 128-bit floating point value
-
+// Include all information about LLVM intrinsics.
+include "llvm/Intrinsics.td"
//===----------------------------------------------------------------------===//
// Register file description - These classes are used to fill in the target
-// description classes in llvm/Target/MRegisterInfo.h
+// description classes.
+class RegisterClass; // Forward def
-// Register - You should define one instance of this class for each register in
-// the target machine.
-//
-class Register {
+// Register - You should define one instance of this class for each register
+// in the target machine. String n will become the "name" of the register.
+class Register<string n> {
string Namespace = "";
- string Name = "";
-}
+ string Name = n;
-// NamedReg - If the name for the 'def' of the register should not become the
-// "name" of the register, you can use this to specify a custom name instead.
-//
-class NamedReg<string n> : Register {
- let Name = n;
+ // SpillSize - If this value is set to a non-zero value, it is the size in
+ // bits of the spill slot required to hold this register. If this value is
+ // set to zero, the information is inferred from any register classes the
+ // register belongs to.
+ int SpillSize = 0;
+
+ // SpillAlignment - This value is used to specify the alignment required for
+ // spilling the register. Like SpillSize, this should only be explicitly
+ // specified if the register is not in a register class.
+ int SpillAlignment = 0;
+
+ // Aliases - A list of registers that this register overlaps with. A read or
+ // modification of this register can potentially read or modifie the aliased
+ // registers.
+ //
+ list<Register> Aliases = [];
+
+ // DwarfNumber - Number used internally by gcc/gdb to identify the register.
+ // These values can be determined by locating the <target>.h file in the
+ // directory llvmgcc/gcc/config/<target>/ and looking for REGISTER_NAMES. The
+ // order of these names correspond to the enumeration used by gcc. A value of
+ // -1 indicates that the gcc number is undefined.
+ int DwarfNumber = -1;
}
-// RegisterAliases - You should define instances of this class to indicate which
-// registers in the register file are aliased together. This allows the code
-// generator to be careful not to put two values with overlapping live ranges
-// into registers which alias.
-//
-class RegisterAliases<Register reg, list<Register> aliases> {
- Register Reg = reg;
- list<Register> Aliases = aliases;
+// RegisterGroup - This can be used to define instances of Register which
+// need to specify aliases.
+// List "aliases" specifies which registers are aliased to this one. This
+// allows the code generator to be careful not to put two values with
+// overlapping live ranges into registers which alias.
+class RegisterGroup<string n, list<Register> aliases> : Register<n> {
+ let Aliases = aliases;
}
// RegisterClass - Now that all of the registers are defined, and aliases
// register classes. This also defines the default allocation order of
// registers by register allocators.
//
-class RegisterClass<ValueType regType, int alignment, list<Register> regList> {
- // RegType - Specify the ValueType of the registers in this register class.
- // Note that all registers in a register class must have the same ValueType.
+class RegisterClass<string namespace, list<ValueType> regTypes, int alignment,
+ list<Register> regList> {
+ string Namespace = namespace;
+
+ // RegType - Specify the list ValueType of the registers in this register
+ // class. Note that all registers in a register class must have the same
+ // ValueTypes. This is a list because some targets permit storing different
+ // types in same register, for example vector values with 128-bit total size,
+ // but different count/size of items, like SSE on x86.
//
- ValueType RegType = regType;
+ list<ValueType> RegTypes = regTypes;
+
+ // Size - Specify the spill size in bits of the registers. A default value of
+ // zero lets tablgen pick an appropriate size.
+ int Size = 0;
// Alignment - Specify the alignment required of the registers when they are
// stored or loaded to memory.
//
- int Size = RegType.Size;
int Alignment = alignment;
// MemberList - Specify which registers are in this class. If the
//
list<Register> MemberList = regList;
- // Methods - This member can be used to insert arbitrary code into a generated
- // register class. The normal usage of this is to overload virtual methods.
- code Methods = [{}];
+ // MethodProtos/MethodBodies - These members can be used to insert arbitrary
+ // code into a generated register class. The normal usage of this is to
+ // overload virtual methods.
+ code MethodProtos = [{}];
+ code MethodBodies = [{}];
}
+//===----------------------------------------------------------------------===//
+// DwarfRegNum - This class provides a mapping of the llvm register enumeration
+// to the register numbering used by gcc and gdb. These values are used by a
+// debug information writer (ex. DwarfWriter) to describe where values may be
+// located during execution.
+class DwarfRegNum<int N> {
+ // DwarfNumber - Number used internally by gcc/gdb to identify the register.
+ // These values can be determined by locating the <target>.h file in the
+ // directory llvmgcc/gcc/config/<target>/ and looking for REGISTER_NAMES. The
+ // order of these names correspond to the enumeration used by gcc. A value of
+ // -1 indicates that the gcc number is undefined.
+ int DwarfNumber = N;
+}
+
+//===----------------------------------------------------------------------===//
+// Pull in the common support for scheduling
+//
+include "TargetSchedule.td"
+
+class Predicate; // Forward def
+
//===----------------------------------------------------------------------===//
// Instruction set description - These classes correspond to the C++ classes in
// the Target/TargetInstrInfo.h file.
//
-
class Instruction {
- string Name; // The opcode string for this instruction
+ string Name = ""; // The opcode string for this instruction
string Namespace = "";
- list<Register> Uses = []; // Default to using no non-operand registers
- list<Register> Defs = []; // Default to modifying no non-operand registers
+ dag OperandList; // An dag containing the MI operand list.
+ string AsmString = ""; // The .s format to print the instruction with.
+
+ // Pattern - Set to the DAG pattern for this instruction, if we know of one,
+ // otherwise, uninitialized.
+ list<dag> Pattern;
+
+ // The follow state will eventually be inferred automatically from the
+ // instruction pattern.
+
+ list<Register> Uses = []; // Default to using no non-operand registers
+ list<Register> Defs = []; // Default to modifying no non-operand registers
+
+ // Predicates - List of predicates which will be turned into isel matching
+ // code.
+ list<Predicate> Predicates = [];
+
+ // Code size.
+ int CodeSize = 0;
+
+ // Added complexity passed onto matching pattern.
+ int AddedComplexity = 0;
// These bits capture information about the high-level semantics of the
// instruction.
bit isReturn = 0; // Is this instruction a return instruction?
bit isBranch = 0; // Is this instruction a branch instruction?
+ bit isBarrier = 0; // Can control flow fall through this instruction?
bit isCall = 0; // Is this instruction a call instruction?
+ bit isLoad = 0; // Is this instruction a load instruction?
+ bit isStore = 0; // Is this instruction a store instruction?
bit isTwoAddress = 0; // Is this a two address instruction?
+ bit isConvertibleToThreeAddress = 0; // Can this 2-addr instruction promote?
+ bit isCommutable = 0; // Is this 3 operand instruction commutable?
bit isTerminator = 0; // Is this part of the terminator for a basic block?
+ bit hasDelaySlot = 0; // Does this instruction have an delay slot?
+ bit usesCustomDAGSchedInserter = 0; // Pseudo instr needing special help.
+ bit hasCtrlDep = 0; // Does this instruction r/w ctrl-flow chains?
+ bit noResults = 0; // Does this instruction produce no results?
+
+ InstrItinClass Itinerary = NoItinerary;// Execution steps used for scheduling.
+
+ string Constraints = "";
+}
+
+/// Imp - Helper class for specifying the implicit uses/defs set for an
+/// instruction.
+class Imp<list<Register> uses, list<Register> defs> {
+ list<Register> Uses = uses;
+ list<Register> Defs = defs;
+}
+
+/// Predicates - These are extra conditionals which are turned into instruction
+/// selector matching code. Currently each predicate is just a string.
+class Predicate<string cond> {
+ string CondString = cond;
}
+class Requires<list<Predicate> preds> {
+ list<Predicate> Predicates = preds;
+}
+
+/// ops definition - This is just a simple marker used to identify the operands
+/// list for an instruction. This should be used like this:
+/// (ops R32:$dst, R32:$src) or something similar.
+def ops;
+
+/// variable_ops definition - Mark this instruction as taking a variable number
+/// of operands.
+def variable_ops;
+
+/// ptr_rc definition - Mark this operand as being a pointer value whose
+/// register class is resolved dynamically via a callback to TargetInstrInfo.
+/// FIXME: We should probably change this to a class which contain a list of
+/// flags. But currently we have but one flag.
+def ptr_rc;
+
+/// Operand Types - These provide the built-in operand types that may be used
+/// by a target. Targets can optionally provide their own operand types as
+/// needed, though this should not be needed for RISC targets.
+class Operand<ValueType ty> {
+ ValueType Type = ty;
+ string PrintMethod = "printOperand";
+ dag MIOperandInfo = (ops);
+}
+
+def i1imm : Operand<i1>;
+def i8imm : Operand<i8>;
+def i16imm : Operand<i16>;
+def i32imm : Operand<i32>;
+def i64imm : Operand<i64>;
+
+
+/// PredicateOperand - This can be used to define a predicate operand for an
+/// instruction. OpTypes specifies the MIOperandInfo for the operand, and
+/// AlwaysVal specifies the value of this predicate when set to "always
+/// execute".
+class PredicateOperand<dag OpTypes, dag AlwaysVal> : Operand<OtherVT> {
+ let MIOperandInfo = OpTypes;
+ dag ExecuteAlways = AlwaysVal;
+}
+
+
// InstrInfo - This class should only be instantiated once to provide parameters
// which are global to the the target machine.
//
class InstrInfo {
- Instruction PHIInst;
- Instruction NOOPInst;
-
// If the target wants to associate some target-specific information with each
// instruction, it should provide these two lists to indicate how to assemble
// the target specific information into the 32 bits available.
//
list<string> TSFlagsFields = [];
list<int> TSFlagsShifts = [];
+
+ // Target can specify its instructions in either big or little-endian formats.
+ // For instance, while both Sparc and PowerPC are big-endian platforms, the
+ // Sparc manual specifies its instructions in the format [31..0] (big), while
+ // PowerPC specifies them using the format [0..31] (little).
+ bit isLittleEndianEncoding = 0;
}
+// Standard Instructions.
+def PHI : Instruction {
+ let OperandList = (ops variable_ops);
+ let AsmString = "PHINODE";
+ let Namespace = "TargetInstrInfo";
+}
+def INLINEASM : Instruction {
+ let OperandList = (ops variable_ops);
+ let AsmString = "";
+ let Namespace = "TargetInstrInfo";
+}
+
+//===----------------------------------------------------------------------===//
+// AsmWriter - This class can be implemented by targets that need to customize
+// the format of the .s file writer.
+//
+// Subtargets can have multiple different asmwriters (e.g. AT&T vs Intel syntax
+// on X86 for example).
+//
+class AsmWriter {
+ // AsmWriterClassName - This specifies the suffix to use for the asmwriter
+ // class. Generated AsmWriter classes are always prefixed with the target
+ // name.
+ string AsmWriterClassName = "AsmPrinter";
+
+ // InstFormatName - AsmWriters can specify the name of the format string to
+ // print instructions with.
+ string InstFormatName = "AsmString";
+
+ // Variant - AsmWriters can be of multiple different variants. Variants are
+ // used to support targets that need to emit assembly code in ways that are
+ // mostly the same for different targets, but have minor differences in
+ // syntax. If the asmstring contains {|} characters in them, this integer
+ // will specify which alternative to use. For example "{x|y|z}" with Variant
+ // == 1, will expand to "y".
+ int Variant = 0;
+}
+def DefaultAsmWriter : AsmWriter;
+
//===----------------------------------------------------------------------===//
// Target - This class contains the "global" target information
//
class Target {
- // CalleeSavedRegisters - As you might guess, this is a list of the callee
- // saved registers for a target.
- list<Register> CalleeSavedRegisters = [];
+ // InstructionSet - Instruction set description for this target.
+ InstrInfo InstructionSet;
+
+ // AssemblyWriters - The AsmWriter instances available for this target.
+ list<AsmWriter> AssemblyWriters = [DefaultAsmWriter];
+}
+
+//===----------------------------------------------------------------------===//
+// SubtargetFeature - A characteristic of the chip set.
+//
+class SubtargetFeature<string n, string a, string v, string d> {
+ // Name - Feature name. Used by command line (-mattr=) to determine the
+ // appropriate target chip.
+ //
+ string Name = n;
- // PointerType - Specify the value type to be used to represent pointers in
- // this target. Typically this is an i32 or i64 type.
- ValueType PointerType;
+ // Attribute - Attribute to be set by feature.
+ //
+ string Attribute = a;
+
+ // Value - Value the attribute to be set to by feature.
+ //
+ string Value = v;
+
+ // Desc - Feature description. Used by command line (-mattr=) to display help
+ // information.
+ //
+ string Desc = d;
+}
- // InstructionSet - Instruction set description for this target
- InstrInfo InstructionSet;
+//===----------------------------------------------------------------------===//
+// Processor chip sets - These values represent each of the chip sets supported
+// by the scheduler. Each Processor definition requires corresponding
+// instruction itineraries.
+//
+class Processor<string n, ProcessorItineraries pi, list<SubtargetFeature> f> {
+ // Name - Chip set name. Used by command line (-mcpu=) to determine the
+ // appropriate target chip.
+ //
+ string Name = n;
+
+ // ProcItin - The scheduling information for the target processor.
+ //
+ ProcessorItineraries ProcItin = pi;
+
+ // Features - list of
+ list<SubtargetFeature> Features = f;
}
+
+//===----------------------------------------------------------------------===//
+// Pull in the common support for DAG isel generation
+//
+include "TargetSelectionDAG.td"