//===- Target.td - Target Independent TableGen interface --------*- C++ -*-===//
+//
+// The LLVM Compiler Infrastructure
+//
+// This file was developed by the LLVM research group and is distributed under
+// the University of Illinois Open Source License. See LICENSE.TXT for details.
+//
+//===----------------------------------------------------------------------===//
//
// This file defines the target-independent interfaces which should be
// implemented by each target which is using a TableGen based code generator.
//===----------------------------------------------------------------------===//
//
// Value types - These values correspond to the register types defined in the
-// ValueTypes.h file.
+// ValueTypes.h file. If you update anything here, you must update it there as
+// well!
//
-class ValueType { string Namespace = "MVT"; }
-
-def i1 : ValueType; // One bit boolean value
-def i8 : ValueType; // 8-bit integer value
-def i16 : ValueType; // 16-bit integer value
-def i32 : ValueType; // 32-bit integer value
-def i64 : ValueType; // 64-bit integer value
-def i128 : ValueType; // 128-bit integer value
-def f32 : ValueType; // 32-bit floating point value
-def f64 : ValueType; // 64-bit floating point value
-def f80 : ValueType; // 80-bit floating point value
-def f128 : ValueType; // 128-bit floating point value
+class ValueType<int size, int value> {
+ string Namespace = "MVT";
+ int Size = size;
+ int Value = value;
+}
+def OtherVT: ValueType<0 , 0>; // "Other" value
+def i1 : ValueType<1 , 1>; // One bit boolean value
+def i8 : ValueType<8 , 2>; // 8-bit integer value
+def i16 : ValueType<16 , 3>; // 16-bit integer value
+def i32 : ValueType<32 , 4>; // 32-bit integer value
+def i64 : ValueType<64 , 5>; // 64-bit integer value
+def i128 : ValueType<128, 5>; // 128-bit integer value
+def f32 : ValueType<32 , 7>; // 32-bit floating point value
+def f64 : ValueType<64 , 8>; // 64-bit floating point value
+def f80 : ValueType<80 , 9>; // 80-bit floating point value
+def f128 : ValueType<128, 9>; // 128-bit floating point value
+def isVoid : ValueType<0 , 11>; // Produces no value
//===----------------------------------------------------------------------===//
// Register file description - These classes are used to fill in the target
//
class Register {
string Namespace = "";
+ string Name = "";
+}
+
+// NamedReg - If the name for the 'def' of the register should not become the
+// "name" of the register, you can use this to specify a custom name instead.
+//
+class NamedReg<string n> : Register {
+ let Name = n;
}
// RegisterAliases - You should define instances of this class to indicate which
// Alignment - Specify the alignment required of the registers when they are
// stored or loaded to memory.
//
+ int Size = RegType.Size;
int Alignment = alignment;
// MemberList - Specify which registers are in this class. If the
//
list<Register> MemberList = regList;
- // allocation_order_* - These methods define the order that the registers
- // should be allocated. See the MRegister.h file for more information.
- //
- code allocation_order_begin;
- code allocation_order_end;
+ // Methods - This member can be used to insert arbitrary code into a generated
+ // register class. The normal usage of this is to overload virtual methods.
+ code Methods = [{}];
+
+ // isDummyClass - If this is set to true, this register class is not really
+ // part of the target, it is just used for other purposes.
+ bit isDummyClass = 0;
}
//===----------------------------------------------------------------------===//
-// Instruction set description -
+// Instruction set description - These classes correspond to the C++ classes in
+// the Target/TargetInstrInfo.h file.
//
class Instruction {
bit isCall = 0; // Is this instruction a call instruction?
bit isTwoAddress = 0; // Is this a two address instruction?
bit isTerminator = 0; // Is this part of the terminator for a basic block?
+
+ // Pattern - Set to the DAG pattern for this instruction, if we know of one,
+ // otherwise, uninitialized.
+ dag Pattern;
+}
+
+class Expander<dag pattern, list<dag> result> {
+ dag Pattern = pattern;
+ list<dag> Result = result;
+}
+
+
+// InstrInfo - This class should only be instantiated once to provide parameters
+// which are global to the the target machine.
+//
+class InstrInfo {
+ Instruction PHIInst;
+
+ // If the target wants to associate some target-specific information with each
+ // instruction, it should provide these two lists to indicate how to assemble
+ // the target specific information into the 32 bits available.
+ //
+ list<string> TSFlagsFields = [];
+ list<int> TSFlagsShifts = [];
}
+
+
+//===----------------------------------------------------------------------===//
+// Target - This class contains the "global" target information
+//
+class Target {
+ // CalleeSavedRegisters - As you might guess, this is a list of the callee
+ // saved registers for a target.
+ list<Register> CalleeSavedRegisters = [];
+
+ // PointerType - Specify the value type to be used to represent pointers in
+ // this target. Typically this is an i32 or i64 type.
+ ValueType PointerType;
+
+ // InstructionSet - Instruction set description for this target
+ InstrInfo InstructionSet;
+}
+
+
+//===----------------------------------------------------------------------===//
+// DAG node definitions used by the instruction selector...
+//
+class DagNodeValType;
+def DNVT_any : DagNodeValType; // No constraint on tree node
+def DNVT_void : DagNodeValType; // Tree node always returns void
+def DNVT_val : DagNodeValType; // A non-void type
+def DNVT_arg0 : DagNodeValType; // Tree node returns same type as Arg0
+def DNVT_arg1 : DagNodeValType; // Tree node returns same type as Arg1
+def DNVT_ptr : DagNodeValType; // The target pointer type
+def DNVT_i8 : DagNodeValType; // Always have an i8 value
+
+class DagNode<DagNodeValType ret, list<DagNodeValType> args> {
+ DagNodeValType RetType = ret;
+ list<DagNodeValType> ArgTypes = args;
+ string EnumName = ?;
+}
+
+// BuiltinDagNodes are built into the instruction selector and correspond to
+// enum values.
+class BuiltinDagNode<DagNodeValType Ret, list<DagNodeValType> Args,
+ string Ename> : DagNode<Ret, Args> {
+ let EnumName = Ename;
+}
+
+// Magic nodes...
+def Void : RegisterClass<isVoid,0,[]> { let isDummyClass = 1; }
+def set : DagNode<DNVT_void, [DNVT_val, DNVT_arg0]>;
+def chain : BuiltinDagNode<DNVT_void, [DNVT_void, DNVT_void], "ChainNode">;
+def blockchain : BuiltinDagNode<DNVT_void, [DNVT_void, DNVT_void],
+ "BlockChainNode">;
+def ChainExpander : Expander<(chain Void, Void), []>;
+def BlockChainExpander : Expander<(blockchain Void, Void), []>;
+
+
+// Terminals...
+def imm : BuiltinDagNode<DNVT_val, [], "Constant">;
+def frameidx : BuiltinDagNode<DNVT_ptr, [], "FrameIndex">;
+def basicblock : BuiltinDagNode<DNVT_ptr, [], "BasicBlock">;
+
+// Arithmetic...
+def plus : BuiltinDagNode<DNVT_arg0, [DNVT_arg1, DNVT_arg0], "Plus">;
+def minus : BuiltinDagNode<DNVT_arg0, [DNVT_arg1, DNVT_arg0], "Minus">;
+def times : BuiltinDagNode<DNVT_arg0, [DNVT_arg1, DNVT_arg0], "Times">;
+def sdiv : BuiltinDagNode<DNVT_arg0, [DNVT_arg1, DNVT_arg0], "SDiv">;
+def udiv : BuiltinDagNode<DNVT_arg0, [DNVT_arg1, DNVT_arg0], "UDiv">;
+def srem : BuiltinDagNode<DNVT_arg0, [DNVT_arg1, DNVT_arg0], "SRem">;
+def urem : BuiltinDagNode<DNVT_arg0, [DNVT_arg1, DNVT_arg0], "URem">;
+def and : BuiltinDagNode<DNVT_arg0, [DNVT_arg1, DNVT_arg0], "And">;
+def or : BuiltinDagNode<DNVT_arg0, [DNVT_arg1, DNVT_arg0], "Or">;
+def xor : BuiltinDagNode<DNVT_arg0, [DNVT_arg1, DNVT_arg0], "Xor">;
+
+// Comparisons...
+def seteq : BuiltinDagNode<DNVT_i8 , [DNVT_arg1, DNVT_arg0], "SetEQ">;
+def setne : BuiltinDagNode<DNVT_i8 , [DNVT_arg1, DNVT_arg0], "SetNE">;
+def setlt : BuiltinDagNode<DNVT_i8 , [DNVT_arg1, DNVT_arg0], "SetLT">;
+def setle : BuiltinDagNode<DNVT_i8 , [DNVT_arg1, DNVT_arg0], "SetLE">;
+def setgt : BuiltinDagNode<DNVT_i8 , [DNVT_arg1, DNVT_arg0], "SetGT">;
+def setge : BuiltinDagNode<DNVT_i8 , [DNVT_arg1, DNVT_arg0], "SetGE">;
+
+def load : BuiltinDagNode<DNVT_val, [DNVT_ptr], "Load">;
+//def store : BuiltinDagNode<DNVT_Void, [DNVT_ptr, DNVT_val]>;
+
+// Other...
+def ret : BuiltinDagNode<DNVT_void, [DNVT_val], "Ret">;
+def retvoid : BuiltinDagNode<DNVT_void, [], "RetVoid">;
+def br : BuiltinDagNode<DNVT_void, [DNVT_ptr], "Br">;
+def brcond : BuiltinDagNode<DNVT_void, [DNVT_i8, DNVT_ptr, DNVT_ptr],
+ "BrCond">;
+
+def unspec1 : BuiltinDagNode<DNVT_any , [DNVT_val], "Unspec1">;
+def unspec2 : BuiltinDagNode<DNVT_any , [DNVT_val, DNVT_val], "Unspec2">;
+
+//===----------------------------------------------------------------------===//
+// DAG nonterminals definitions used by the instruction selector...
+//
+class Nonterminal<dag pattern> {
+ dag Pattern = pattern;
+ bit BuiltIn = 0;
+}
+