//===-- InstSelectSimple.cpp - A simple instruction selector for x86 ------===//
//
-// This file defines a simple peephole instruction selector for the x86 platform
+// This file defines a simple peephole instruction selector for the x86 target
//
//===----------------------------------------------------------------------===//
#include "X86InstrInfo.h"
#include "X86InstrBuilder.h"
#include "llvm/Function.h"
-#include "llvm/iTerminators.h"
-#include "llvm/iOperators.h"
-#include "llvm/iOther.h"
-#include "llvm/iPHINode.h"
-#include "llvm/iMemory.h"
-#include "llvm/Type.h"
+#include "llvm/Instructions.h"
+#include "llvm/DerivedTypes.h"
#include "llvm/Constants.h"
#include "llvm/Pass.h"
+#include "llvm/Intrinsics.h"
#include "llvm/CodeGen/MachineFunction.h"
#include "llvm/CodeGen/MachineInstrBuilder.h"
+#include "llvm/CodeGen/SSARegMap.h"
+#include "llvm/CodeGen/MachineFrameInfo.h"
+#include "llvm/CodeGen/MachineConstantPool.h"
#include "llvm/Target/TargetMachine.h"
-#include "llvm/Support/InstVisitor.h"
#include "llvm/Target/MRegisterInfo.h"
-#include <map>
+#include "llvm/Support/InstVisitor.h"
+
+/// BMI - A special BuildMI variant that takes an iterator to insert the
+/// instruction at as well as a basic block. This is the version for when you
+/// have a destination register in mind.
+inline static MachineInstrBuilder BMI(MachineBasicBlock *MBB,
+ MachineBasicBlock::iterator &I,
+ int Opcode, unsigned NumOperands,
+ unsigned DestReg) {
+ assert(I >= MBB->begin() && I <= MBB->end() && "Bad iterator!");
+ MachineInstr *MI = new MachineInstr(Opcode, NumOperands+1, true, true);
+ I = MBB->insert(I, MI)+1;
+ return MachineInstrBuilder(MI).addReg(DestReg, MOTy::Def);
+}
+
+/// BMI - A special BuildMI variant that takes an iterator to insert the
+/// instruction at as well as a basic block.
+inline static MachineInstrBuilder BMI(MachineBasicBlock *MBB,
+ MachineBasicBlock::iterator &I,
+ int Opcode, unsigned NumOperands) {
+ assert(I >= MBB->begin() && I <= MBB->end() && "Bad iterator!");
+ MachineInstr *MI = new MachineInstr(Opcode, NumOperands, true, true);
+ I = MBB->insert(I, MI)+1;
+ return MachineInstrBuilder(MI);
+}
-using namespace MOTy; // Get Use, Def, UseAndDef
namespace {
struct ISel : public FunctionPass, InstVisitor<ISel> {
TargetMachine &TM;
- MachineFunction *F; // The function we are compiling into
- MachineBasicBlock *BB; // The current MBB we are compiling
+ MachineFunction *F; // The function we are compiling into
+ MachineBasicBlock *BB; // The current MBB we are compiling
+ int VarArgsFrameIndex; // FrameIndex for start of varargs area
- unsigned CurReg;
std::map<Value*, unsigned> RegMap; // Mapping between Val's and SSA Regs
- ISel(TargetMachine &tm)
- : TM(tm), F(0), BB(0), CurReg(MRegisterInfo::FirstVirtualRegister) {}
+ // MBBMap - Mapping between LLVM BB -> Machine BB
+ std::map<const BasicBlock*, MachineBasicBlock*> MBBMap;
+
+ ISel(TargetMachine &tm) : TM(tm), F(0), BB(0) {}
/// runOnFunction - Top level implementation of instruction selection for
/// the entire function.
///
bool runOnFunction(Function &Fn) {
F = &MachineFunction::construct(&Fn, TM);
+
+ // Create all of the machine basic blocks for the function...
+ for (Function::iterator I = Fn.begin(), E = Fn.end(); I != E; ++I)
+ F->getBasicBlockList().push_back(MBBMap[I] = new MachineBasicBlock(I));
+
+ BB = &F->front();
+
+ // Copy incoming arguments off of the stack...
+ LoadArgumentsToVirtualRegs(Fn);
+
+ // Instruction select everything except PHI nodes
visit(Fn);
+
+ // Select the PHI nodes
+ SelectPHINodes();
+
RegMap.clear();
- CurReg = MRegisterInfo::FirstVirtualRegister;
+ MBBMap.clear();
F = 0;
return false; // We never modify the LLVM itself.
}
+ virtual const char *getPassName() const {
+ return "X86 Simple Instruction Selection";
+ }
+
/// visitBasicBlock - This method is called when we are visiting a new basic
/// block. This simply creates a new MachineBasicBlock to emit code into
/// and adds it to the current MachineFunction. Subsequent visit* for
/// instructions will be invoked for all instructions in the basic block.
///
void visitBasicBlock(BasicBlock &LLVM_BB) {
- BB = new MachineBasicBlock(&LLVM_BB);
- // FIXME: Use the auto-insert form when it's available
- F->getBasicBlockList().push_back(BB);
+ BB = MBBMap[&LLVM_BB];
}
+ /// LoadArgumentsToVirtualRegs - Load all of the arguments to this function
+ /// from the stack into virtual registers.
+ ///
+ void LoadArgumentsToVirtualRegs(Function &F);
+
+ /// SelectPHINodes - Insert machine code to generate phis. This is tricky
+ /// because we have to generate our sources into the source basic blocks,
+ /// not the current one.
+ ///
+ void SelectPHINodes();
+
// Visitation methods for various instructions. These methods simply emit
// fixed X86 code for each instruction.
//
+
+ // Control flow operators
void visitReturnInst(ReturnInst &RI);
void visitBranchInst(BranchInst &BI);
+ struct ValueRecord {
+ unsigned Reg;
+ const Type *Ty;
+ ValueRecord(unsigned R, const Type *T) : Reg(R), Ty(T) {}
+ };
+ void doCall(const ValueRecord &Ret, MachineInstr *CallMI,
+ const std::vector<ValueRecord> &Args);
+ void visitCallInst(CallInst &I);
+ void visitIntrinsicCall(LLVMIntrinsic::ID ID, CallInst &I);
+
// Arithmetic operators
void visitSimpleBinary(BinaryOperator &B, unsigned OpcodeClass);
void visitAdd(BinaryOperator &B) { visitSimpleBinary(B, 0); }
void visitSub(BinaryOperator &B) { visitSimpleBinary(B, 1); }
+ void doMultiply(MachineBasicBlock *MBB, MachineBasicBlock::iterator &MBBI,
+ unsigned DestReg, const Type *DestTy,
+ unsigned Op0Reg, unsigned Op1Reg);
void visitMul(BinaryOperator &B);
void visitDiv(BinaryOperator &B) { visitDivRem(B); }
void visitOr (BinaryOperator &B) { visitSimpleBinary(B, 3); }
void visitXor(BinaryOperator &B) { visitSimpleBinary(B, 4); }
- // Binary comparison operators
- void visitSetCCInst(SetCondInst &I, unsigned OpNum);
- void visitSetEQ(SetCondInst &I) { visitSetCCInst(I, 0); }
- void visitSetNE(SetCondInst &I) { visitSetCCInst(I, 1); }
- void visitSetLT(SetCondInst &I) { visitSetCCInst(I, 2); }
- void visitSetGT(SetCondInst &I) { visitSetCCInst(I, 3); }
- void visitSetLE(SetCondInst &I) { visitSetCCInst(I, 4); }
- void visitSetGE(SetCondInst &I) { visitSetCCInst(I, 5); }
+ // Comparison operators...
+ void visitSetCondInst(SetCondInst &I);
+ bool EmitComparisonGetSignedness(unsigned OpNum, Value *Op0, Value *Op1);
// Memory Instructions
+ MachineInstr *doFPLoad(MachineBasicBlock *MBB,
+ MachineBasicBlock::iterator &MBBI,
+ const Type *Ty, unsigned DestReg);
void visitLoadInst(LoadInst &I);
+ void doFPStore(const Type *Ty, unsigned DestAddrReg, unsigned SrcReg);
void visitStoreInst(StoreInst &I);
-
+ void visitGetElementPtrInst(GetElementPtrInst &I);
+ void visitAllocaInst(AllocaInst &I);
+ void visitMallocInst(MallocInst &I);
+ void visitFreeInst(FreeInst &I);
+
// Other operators
void visitShiftInst(ShiftInst &I);
- void visitPHINode(PHINode &I);
+ void visitPHINode(PHINode &I) {} // PHI nodes handled by second pass
+ void visitCastInst(CastInst &I);
+ void visitVarArgInst(VarArgInst &I);
void visitInstruction(Instruction &I) {
std::cerr << "Cannot instruction select: " << I;
abort();
}
+ /// promote32 - Make a value 32-bits wide, and put it somewhere.
+ ///
+ void promote32(unsigned targetReg, const ValueRecord &VR);
+
+ /// EmitByteSwap - Byteswap SrcReg into DestReg.
+ ///
+ void EmitByteSwap(unsigned DestReg, unsigned SrcReg, unsigned Class);
+ /// emitGEPOperation - Common code shared between visitGetElementPtrInst and
+ /// constant expression GEP support.
+ ///
+ void emitGEPOperation(MachineBasicBlock *BB, MachineBasicBlock::iterator&IP,
+ Value *Src, User::op_iterator IdxBegin,
+ User::op_iterator IdxEnd, unsigned TargetReg);
+
+ /// emitCastOperation - Common code shared between visitCastInst and
+ /// constant expression cast support.
+ void emitCastOperation(MachineBasicBlock *BB,MachineBasicBlock::iterator&IP,
+ Value *Src, const Type *DestTy, unsigned TargetReg);
+
+ /// emitSimpleBinaryOperation - Common code shared between visitSimpleBinary
+ /// and constant expression support.
+ void emitSimpleBinaryOperation(MachineBasicBlock *BB,
+ MachineBasicBlock::iterator &IP,
+ Value *Op0, Value *Op1,
+ unsigned OperatorClass, unsigned TargetReg);
+
/// copyConstantToRegister - Output the instructions required to put the
/// specified constant into the specified register.
///
- void copyConstantToRegister(Constant *C, unsigned Reg);
+ void copyConstantToRegister(MachineBasicBlock *MBB,
+ MachineBasicBlock::iterator &MBBI,
+ Constant *C, unsigned Reg);
+
+ /// makeAnotherReg - This method returns the next register number we haven't
+ /// yet used.
+ ///
+ /// Long values are handled somewhat specially. They are always allocated
+ /// as pairs of 32 bit integer values. The register number returned is the
+ /// lower 32 bits of the long value, and the regNum+1 is the upper 32 bits
+ /// of the long value.
+ ///
+ unsigned makeAnotherReg(const Type *Ty) {
+ if (Ty == Type::LongTy || Ty == Type::ULongTy) {
+ const TargetRegisterClass *RC =
+ TM.getRegisterInfo()->getRegClassForType(Type::IntTy);
+ // Create the lower part
+ F->getSSARegMap()->createVirtualRegister(RC);
+ // Create the upper part.
+ return F->getSSARegMap()->createVirtualRegister(RC)-1;
+ }
+
+ // Add the mapping of regnumber => reg class to MachineFunction
+ const TargetRegisterClass *RC =
+ TM.getRegisterInfo()->getRegClassForType(Ty);
+ return F->getSSARegMap()->createVirtualRegister(RC);
+ }
/// getReg - This method turns an LLVM value into a register number. This
/// is guaranteed to produce the same register number for a particular value
///
unsigned getReg(Value &V) { return getReg(&V); } // Allow references
unsigned getReg(Value *V) {
+ // Just append to the end of the current bb.
+ MachineBasicBlock::iterator It = BB->end();
+ return getReg(V, BB, It);
+ }
+ unsigned getReg(Value *V, MachineBasicBlock *MBB,
+ MachineBasicBlock::iterator &IPt) {
unsigned &Reg = RegMap[V];
if (Reg == 0) {
- Reg = CurReg++;
+ Reg = makeAnotherReg(V->getType());
RegMap[V] = Reg;
-
- // Add the mapping of regnumber => reg class to MachineFunction
- F->addRegMap(Reg,
- TM.getRegisterInfo()->getRegClassForType(V->getType()));
}
// If this operand is a constant, emit the code to copy the constant into
// the register here...
//
- if (Constant *C = dyn_cast<Constant>(V))
- copyConstantToRegister(C, Reg);
+ if (Constant *C = dyn_cast<Constant>(V)) {
+ copyConstantToRegister(MBB, IPt, C, Reg);
+ RegMap.erase(V); // Assign a new name to this constant if ref'd again
+ } else if (GlobalValue *GV = dyn_cast<GlobalValue>(V)) {
+ // Move the address of the global into the register
+ BMI(MBB, IPt, X86::MOVir32, 1, Reg).addGlobalAddress(GV);
+ RegMap.erase(V); // Assign a new name to this address if ref'd again
+ }
return Reg;
}
/// Representation.
///
enum TypeClass {
- cByte, cShort, cInt, cLong, cFloat, cDouble
+ cByte, cShort, cInt, cFP, cLong
};
/// getClass - Turn a primitive type into a "class" number which is based on the
case Type::UIntTyID:
case Type::PointerTyID: return cInt; // Int's and pointers are class #2
+ case Type::FloatTyID:
+ case Type::DoubleTyID: return cFP; // Floating Point is #3
+
case Type::LongTyID:
- case Type::ULongTyID: return cLong; // Longs are class #3
- case Type::FloatTyID: return cFloat; // Float is class #4
- case Type::DoubleTyID: return cDouble; // Doubles are class #5
+ case Type::ULongTyID: return cLong; // Longs are class #4
default:
assert(0 && "Invalid type to getClass!");
return cByte; // not reached
}
}
+// getClassB - Just like getClass, but treat boolean values as bytes.
+static inline TypeClass getClassB(const Type *Ty) {
+ if (Ty == Type::BoolTy) return cByte;
+ return getClass(Ty);
+}
+
/// copyConstantToRegister - Output the instructions required to put the
/// specified constant into the specified register.
///
-void ISel::copyConstantToRegister(Constant *C, unsigned R) {
- assert (!isa<ConstantExpr>(C) && "Constant expressions not yet handled!\n");
+void ISel::copyConstantToRegister(MachineBasicBlock *MBB,
+ MachineBasicBlock::iterator &IP,
+ Constant *C, unsigned R) {
+ if (ConstantExpr *CE = dyn_cast<ConstantExpr>(C)) {
+ unsigned Class = 0;
+ switch (CE->getOpcode()) {
+ case Instruction::GetElementPtr:
+ emitGEPOperation(MBB, IP, CE->getOperand(0),
+ CE->op_begin()+1, CE->op_end(), R);
+ return;
+ case Instruction::Cast:
+ emitCastOperation(MBB, IP, CE->getOperand(0), CE->getType(), R);
+ return;
+
+ case Instruction::Xor: ++Class; // FALL THROUGH
+ case Instruction::Or: ++Class; // FALL THROUGH
+ case Instruction::And: ++Class; // FALL THROUGH
+ case Instruction::Sub: ++Class; // FALL THROUGH
+ case Instruction::Add:
+ emitSimpleBinaryOperation(MBB, IP, CE->getOperand(0), CE->getOperand(1),
+ Class, R);
+ return;
+
+ default:
+ std::cerr << "Offending expr: " << C << "\n";
+ assert(0 && "Constant expressions not yet handled!\n");
+ }
+ }
if (C->getType()->isIntegral()) {
- unsigned Class = getClass(C->getType());
- assert(Class != 3 && "Type not handled yet!");
+ unsigned Class = getClassB(C->getType());
+
+ if (Class == cLong) {
+ // Copy the value into the register pair.
+ uint64_t Val;
+ if (C->getType()->isSigned())
+ Val = cast<ConstantSInt>(C)->getValue();
+ else
+ Val = cast<ConstantUInt>(C)->getValue();
+
+ BMI(MBB, IP, X86::MOVir32, 1, R).addZImm(Val & 0xFFFFFFFF);
+ BMI(MBB, IP, X86::MOVir32, 1, R+1).addZImm(Val >> 32);
+ return;
+ }
+
+ assert(Class <= cInt && "Type not handled yet!");
static const unsigned IntegralOpcodeTab[] = {
X86::MOVir8, X86::MOVir16, X86::MOVir32
};
- if (C->getType()->isSigned()) {
+ if (C->getType() == Type::BoolTy) {
+ BMI(MBB, IP, X86::MOVir8, 1, R).addZImm(C == ConstantBool::True);
+ } else if (C->getType()->isSigned()) {
ConstantSInt *CSI = cast<ConstantSInt>(C);
- BuildMI(BB, IntegralOpcodeTab[Class], 1, R).addSImm(CSI->getValue());
+ BMI(MBB, IP, IntegralOpcodeTab[Class], 1, R).addZImm(CSI->getValue());
} else {
ConstantUInt *CUI = cast<ConstantUInt>(C);
- BuildMI(BB, IntegralOpcodeTab[Class], 1, R).addZImm(CUI->getValue());
+ BMI(MBB, IP, IntegralOpcodeTab[Class], 1, R).addZImm(CUI->getValue());
+ }
+ } else if (ConstantFP *CFP = dyn_cast<ConstantFP>(C)) {
+ double Value = CFP->getValue();
+ if (Value == +0.0)
+ BMI(MBB, IP, X86::FLD0, 0, R);
+ else if (Value == +1.0)
+ BMI(MBB, IP, X86::FLD1, 0, R);
+ else {
+ // Otherwise we need to spill the constant to memory...
+ MachineConstantPool *CP = F->getConstantPool();
+ unsigned CPI = CP->getConstantPoolIndex(CFP);
+ addConstantPoolReference(doFPLoad(MBB, IP, CFP->getType(), R), CPI);
}
+
+ } else if (isa<ConstantPointerNull>(C)) {
+ // Copy zero (null pointer) to the register.
+ BMI(MBB, IP, X86::MOVir32, 1, R).addZImm(0);
+ } else if (ConstantPointerRef *CPR = dyn_cast<ConstantPointerRef>(C)) {
+ unsigned SrcReg = getReg(CPR->getValue(), MBB, IP);
+ BMI(MBB, IP, X86::MOVrr32, 1, R).addReg(SrcReg);
} else {
+ std::cerr << "Offending constant: " << C << "\n";
assert(0 && "Type not handled yet!");
}
}
+/// LoadArgumentsToVirtualRegs - Load all of the arguments to this function from
+/// the stack into virtual registers.
+///
+void ISel::LoadArgumentsToVirtualRegs(Function &Fn) {
+ // Emit instructions to load the arguments... On entry to a function on the
+ // X86, the stack frame looks like this:
+ //
+ // [ESP] -- return address
+ // [ESP + 4] -- first argument (leftmost lexically)
+ // [ESP + 8] -- second argument, if first argument is four bytes in size
+ // ...
+ //
+ unsigned ArgOffset = 0; // Frame mechanisms handle retaddr slot
+ MachineFrameInfo *MFI = F->getFrameInfo();
+
+ for (Function::aiterator I = Fn.abegin(), E = Fn.aend(); I != E; ++I) {
+ unsigned Reg = getReg(*I);
+
+ int FI; // Frame object index
+ switch (getClassB(I->getType())) {
+ case cByte:
+ FI = MFI->CreateFixedObject(1, ArgOffset);
+ addFrameReference(BuildMI(BB, X86::MOVmr8, 4, Reg), FI);
+ break;
+ case cShort:
+ FI = MFI->CreateFixedObject(2, ArgOffset);
+ addFrameReference(BuildMI(BB, X86::MOVmr16, 4, Reg), FI);
+ break;
+ case cInt:
+ FI = MFI->CreateFixedObject(4, ArgOffset);
+ addFrameReference(BuildMI(BB, X86::MOVmr32, 4, Reg), FI);
+ break;
+ case cLong:
+ FI = MFI->CreateFixedObject(8, ArgOffset);
+ addFrameReference(BuildMI(BB, X86::MOVmr32, 4, Reg), FI);
+ addFrameReference(BuildMI(BB, X86::MOVmr32, 4, Reg+1), FI, 4);
+ ArgOffset += 4; // longs require 4 additional bytes
+ break;
+ case cFP:
+ unsigned Opcode;
+ if (I->getType() == Type::FloatTy) {
+ Opcode = X86::FLDr32;
+ FI = MFI->CreateFixedObject(4, ArgOffset);
+ } else {
+ Opcode = X86::FLDr64;
+ FI = MFI->CreateFixedObject(8, ArgOffset);
+ ArgOffset += 4; // doubles require 4 additional bytes
+ }
+ addFrameReference(BuildMI(BB, Opcode, 4, Reg), FI);
+ break;
+ default:
+ assert(0 && "Unhandled argument type!");
+ }
+ ArgOffset += 4; // Each argument takes at least 4 bytes on the stack...
+ }
-/// SetCC instructions - Here we just emit boilerplate code to set a byte-sized
-/// register, then move it to wherever the result should be.
-/// We handle FP setcc instructions by pushing them, doing a
-/// compare-and-pop-twice, and then copying the concodes to the main
-/// processor's concodes (I didn't make this up, it's in the Intel manual)
+ // If the function takes variable number of arguments, add a frame offset for
+ // the start of the first vararg value... this is used to expand
+ // llvm.va_start.
+ if (Fn.getFunctionType()->isVarArg())
+ VarArgsFrameIndex = MFI->CreateFixedObject(1, ArgOffset);
+}
+
+
+/// SelectPHINodes - Insert machine code to generate phis. This is tricky
+/// because we have to generate our sources into the source basic blocks, not
+/// the current one.
///
-void ISel::visitSetCCInst(SetCondInst &I, unsigned OpNum) {
+void ISel::SelectPHINodes() {
+ const TargetInstrInfo &TII = TM.getInstrInfo();
+ const Function &LF = *F->getFunction(); // The LLVM function...
+ for (Function::const_iterator I = LF.begin(), E = LF.end(); I != E; ++I) {
+ const BasicBlock *BB = I;
+ MachineBasicBlock *MBB = MBBMap[I];
+
+ // Loop over all of the PHI nodes in the LLVM basic block...
+ unsigned NumPHIs = 0;
+ for (BasicBlock::const_iterator I = BB->begin();
+ PHINode *PN = (PHINode*)dyn_cast<PHINode>(I); ++I) {
+
+ // Create a new machine instr PHI node, and insert it.
+ unsigned PHIReg = getReg(*PN);
+ MachineInstr *PhiMI = BuildMI(X86::PHI, PN->getNumOperands(), PHIReg);
+ MBB->insert(MBB->begin()+NumPHIs++, PhiMI);
+
+ MachineInstr *LongPhiMI = 0;
+ if (PN->getType() == Type::LongTy || PN->getType() == Type::ULongTy) {
+ LongPhiMI = BuildMI(X86::PHI, PN->getNumOperands(), PHIReg+1);
+ MBB->insert(MBB->begin()+NumPHIs++, LongPhiMI);
+ }
+
+ // PHIValues - Map of blocks to incoming virtual registers. We use this
+ // so that we only initialize one incoming value for a particular block,
+ // even if the block has multiple entries in the PHI node.
+ //
+ std::map<MachineBasicBlock*, unsigned> PHIValues;
+
+ for (unsigned i = 0, e = PN->getNumIncomingValues(); i != e; ++i) {
+ MachineBasicBlock *PredMBB = MBBMap[PN->getIncomingBlock(i)];
+ unsigned ValReg;
+ std::map<MachineBasicBlock*, unsigned>::iterator EntryIt =
+ PHIValues.lower_bound(PredMBB);
+
+ if (EntryIt != PHIValues.end() && EntryIt->first == PredMBB) {
+ // We already inserted an initialization of the register for this
+ // predecessor. Recycle it.
+ ValReg = EntryIt->second;
+
+ } else {
+ // Get the incoming value into a virtual register. If it is not
+ // already available in a virtual register, insert the computation
+ // code into PredMBB
+ //
+ MachineBasicBlock::iterator PI = PredMBB->end();
+ while (PI != PredMBB->begin() &&
+ TII.isTerminatorInstr((*(PI-1))->getOpcode()))
+ --PI;
+ ValReg = getReg(PN->getIncomingValue(i), PredMBB, PI);
+
+ // Remember that we inserted a value for this PHI for this predecessor
+ PHIValues.insert(EntryIt, std::make_pair(PredMBB, ValReg));
+ }
+
+ PhiMI->addRegOperand(ValReg);
+ PhiMI->addMachineBasicBlockOperand(PredMBB);
+ if (LongPhiMI) {
+ LongPhiMI->addRegOperand(ValReg+1);
+ LongPhiMI->addMachineBasicBlockOperand(PredMBB);
+ }
+ }
+ }
+ }
+}
+
+// canFoldSetCCIntoBranch - Return the setcc instruction if we can fold it into
+// the conditional branch instruction which is the only user of the cc
+// instruction. This is the case if the conditional branch is the only user of
+// the setcc, and if the setcc is in the same basic block as the conditional
+// branch. We also don't handle long arguments below, so we reject them here as
+// well.
+//
+static SetCondInst *canFoldSetCCIntoBranch(Value *V) {
+ if (SetCondInst *SCI = dyn_cast<SetCondInst>(V))
+ if (SCI->use_size() == 1 && isa<BranchInst>(SCI->use_back()) &&
+ SCI->getParent() == cast<BranchInst>(SCI->use_back())->getParent()) {
+ const Type *Ty = SCI->getOperand(0)->getType();
+ if (Ty != Type::LongTy && Ty != Type::ULongTy)
+ return SCI;
+ }
+ return 0;
+}
+
+// Return a fixed numbering for setcc instructions which does not depend on the
+// order of the opcodes.
+//
+static unsigned getSetCCNumber(unsigned Opcode) {
+ switch(Opcode) {
+ default: assert(0 && "Unknown setcc instruction!");
+ case Instruction::SetEQ: return 0;
+ case Instruction::SetNE: return 1;
+ case Instruction::SetLT: return 2;
+ case Instruction::SetGE: return 3;
+ case Instruction::SetGT: return 4;
+ case Instruction::SetLE: return 5;
+ }
+}
+
+// LLVM -> X86 signed X86 unsigned
+// ----- ---------- ------------
+// seteq -> sete sete
+// setne -> setne setne
+// setlt -> setl setb
+// setge -> setge setae
+// setgt -> setg seta
+// setle -> setle setbe
+static const unsigned SetCCOpcodeTab[2][6] = {
+ {X86::SETEr, X86::SETNEr, X86::SETBr, X86::SETAEr, X86::SETAr, X86::SETBEr},
+ {X86::SETEr, X86::SETNEr, X86::SETLr, X86::SETGEr, X86::SETGr, X86::SETLEr},
+};
+
+bool ISel::EmitComparisonGetSignedness(unsigned OpNum, Value *Op0, Value *Op1) {
+
// The arguments are already supposed to be of the same type.
- const Type *CompTy = I.getOperand(0)->getType();
- unsigned reg1 = getReg(I.getOperand(0));
- unsigned reg2 = getReg(I.getOperand(1));
+ const Type *CompTy = Op0->getType();
+ bool isSigned = CompTy->isSigned();
+ unsigned reg1 = getReg(Op0);
+ unsigned reg2 = getReg(Op1);
- unsigned Class = getClass(CompTy);
+ unsigned Class = getClassB(CompTy);
switch (Class) {
+ default: assert(0 && "Unknown type class!");
// Emit: cmp <var1>, <var2> (do the comparison). We can
// compare 8-bit with 8-bit, 16-bit with 16-bit, 32-bit with
// 32-bit.
case cByte:
- BuildMI (BB, X86::CMPrr8, 2).addReg (reg1).addReg (reg2);
+ BuildMI(BB, X86::CMPrr8, 2).addReg(reg1).addReg(reg2);
break;
case cShort:
- BuildMI (BB, X86::CMPrr16, 2).addReg (reg1).addReg (reg2);
+ BuildMI(BB, X86::CMPrr16, 2).addReg(reg1).addReg(reg2);
break;
case cInt:
- BuildMI (BB, X86::CMPrr32, 2).addReg (reg1).addReg (reg2);
- break;
-
- // Push the variables on the stack with fldl opcodes.
- // FIXME: assuming var1, var2 are in memory, if not, spill to
- // stack first
- case cFloat: // Floats
- BuildMI (BB, X86::FLDr4, 1, X86::NoReg).addReg (reg1);
- BuildMI (BB, X86::FLDr4, 1, X86::NoReg).addReg (reg2);
+ BuildMI(BB, X86::CMPrr32, 2).addReg(reg1).addReg(reg2);
break;
- case cDouble: // Doubles
- BuildMI (BB, X86::FLDr8, 1, X86::NoReg).addReg (reg1);
- BuildMI (BB, X86::FLDr8, 1, X86::NoReg).addReg (reg2);
+ case cFP:
+ BuildMI(BB, X86::FpUCOM, 2).addReg(reg1).addReg(reg2);
+ BuildMI(BB, X86::FNSTSWr8, 0);
+ BuildMI(BB, X86::SAHF, 1);
+ isSigned = false; // Compare with unsigned operators
break;
+
case cLong:
- default:
- visitInstruction(I);
- }
+ if (OpNum < 2) { // seteq, setne
+ unsigned LoTmp = makeAnotherReg(Type::IntTy);
+ unsigned HiTmp = makeAnotherReg(Type::IntTy);
+ unsigned FinalTmp = makeAnotherReg(Type::IntTy);
+ BuildMI(BB, X86::XORrr32, 2, LoTmp).addReg(reg1).addReg(reg2);
+ BuildMI(BB, X86::XORrr32, 2, HiTmp).addReg(reg1+1).addReg(reg2+1);
+ BuildMI(BB, X86::ORrr32, 2, FinalTmp).addReg(LoTmp).addReg(HiTmp);
+ break; // Allow the sete or setne to be generated from flags set by OR
+ } else {
+ // Emit a sequence of code which compares the high and low parts once
+ // each, then uses a conditional move to handle the overflow case. For
+ // example, a setlt for long would generate code like this:
+ //
+ // AL = lo(op1) < lo(op2) // Signedness depends on operands
+ // BL = hi(op1) < hi(op2) // Always unsigned comparison
+ // dest = hi(op1) == hi(op2) ? AL : BL;
+ //
- if (CompTy->isFloatingPoint()) {
- // (Non-trapping) compare and pop twice.
- BuildMI (BB, X86::FUCOMPP, 0);
- // Move fp status word (concodes) to ax.
- BuildMI (BB, X86::FNSTSWr8, 1, X86::AX);
- // Load real concodes from ax.
- BuildMI (BB, X86::SAHF, 1).addReg(X86::AH);
+ // FIXME: This would be much better if we had hierarchical register
+ // classes! Until then, hardcode registers so that we can deal with their
+ // aliases (because we don't have conditional byte moves).
+ //
+ BuildMI(BB, X86::CMPrr32, 2).addReg(reg1).addReg(reg2);
+ BuildMI(BB, SetCCOpcodeTab[0][OpNum], 0, X86::AL);
+ BuildMI(BB, X86::CMPrr32, 2).addReg(reg1+1).addReg(reg2+1);
+ BuildMI(BB, SetCCOpcodeTab[isSigned][OpNum], 0, X86::BL);
+ BuildMI(BB, X86::CMOVErr16, 2, X86::BX).addReg(X86::BX).addReg(X86::AX);
+ // NOTE: visitSetCondInst knows that the value is dumped into the BL
+ // register at this point for long values...
+ return isSigned;
+ }
}
+ return isSigned;
+}
- // Emit setOp instruction (extract concode; clobbers ax),
- // using the following mapping:
- // LLVM -> X86 signed X86 unsigned
- // ----- ----- -----
- // seteq -> sete sete
- // setne -> setne setne
- // setlt -> setl setb
- // setgt -> setg seta
- // setle -> setle setbe
- // setge -> setge setae
- static const unsigned OpcodeTab[2][6] = {
- {X86::SETEr, X86::SETNEr, X86::SETBr, X86::SETAr, X86::SETBEr, X86::SETAEr},
- {X86::SETEr, X86::SETNEr, X86::SETLr, X86::SETGr, X86::SETLEr, X86::SETGEr},
- };
+/// SetCC instructions - Here we just emit boilerplate code to set a byte-sized
+/// register, then move it to wherever the result should be.
+///
+void ISel::visitSetCondInst(SetCondInst &I) {
+ if (canFoldSetCCIntoBranch(&I)) return; // Fold this into a branch...
- BuildMI(BB, OpcodeTab[CompTy->isSigned()][OpNum], 0, X86::AL);
-
- // Put it in the result using a move.
- BuildMI (BB, X86::MOVrr8, 1, getReg(I)).addReg(X86::AL);
+ unsigned OpNum = getSetCCNumber(I.getOpcode());
+ unsigned DestReg = getReg(I);
+ bool isSigned = EmitComparisonGetSignedness(OpNum, I.getOperand(0),
+ I.getOperand(1));
+
+ if (getClassB(I.getOperand(0)->getType()) != cLong || OpNum < 2) {
+ // Handle normal comparisons with a setcc instruction...
+ BuildMI(BB, SetCCOpcodeTab[isSigned][OpNum], 0, DestReg);
+ } else {
+ // Handle long comparisons by copying the value which is already in BL into
+ // the register we want...
+ BuildMI(BB, X86::MOVrr8, 1, DestReg).addReg(X86::BL);
+ }
}
+/// promote32 - Emit instructions to turn a narrow operand into a 32-bit-wide
+/// operand, in the specified target register.
+void ISel::promote32(unsigned targetReg, const ValueRecord &VR) {
+ bool isUnsigned = VR.Ty->isUnsigned();
+ switch (getClassB(VR.Ty)) {
+ case cByte:
+ // Extend value into target register (8->32)
+ if (isUnsigned)
+ BuildMI(BB, X86::MOVZXr32r8, 1, targetReg).addReg(VR.Reg);
+ else
+ BuildMI(BB, X86::MOVSXr32r8, 1, targetReg).addReg(VR.Reg);
+ break;
+ case cShort:
+ // Extend value into target register (16->32)
+ if (isUnsigned)
+ BuildMI(BB, X86::MOVZXr32r16, 1, targetReg).addReg(VR.Reg);
+ else
+ BuildMI(BB, X86::MOVSXr32r16, 1, targetReg).addReg(VR.Reg);
+ break;
+ case cInt:
+ // Move value into target register (32->32)
+ BuildMI(BB, X86::MOVrr32, 1, targetReg).addReg(VR.Reg);
+ break;
+ default:
+ assert(0 && "Unpromotable operand class in promote32");
+ }
+}
/// 'ret' instruction - Here we are interested in meeting the x86 ABI. As such,
/// we have the following possibilities:
/// ret long, ulong : Move value into EAX/EDX and return
/// ret float/double : Top of FP stack
///
-void ISel::visitReturnInst (ReturnInst &I) {
+void ISel::visitReturnInst(ReturnInst &I) {
if (I.getNumOperands() == 0) {
- // Emit a 'ret' instruction
- BuildMI(BB, X86::RET, 0);
+ BuildMI(BB, X86::RET, 0); // Just emit a 'ret' instruction
return;
}
- unsigned val = getReg(I.getOperand(0));
- unsigned Class = getClass(I.getOperand(0)->getType());
- bool isUnsigned = I.getOperand(0)->getType()->isUnsigned();
- switch (Class) {
- case cByte:
- // ret sbyte, ubyte: Extend value into EAX and return
- if (isUnsigned)
- BuildMI (BB, X86::MOVZXr32r8, 1, X86::EAX).addReg (val);
- else
- BuildMI (BB, X86::MOVSXr32r8, 1, X86::EAX).addReg (val);
- break;
+ Value *RetVal = I.getOperand(0);
+ unsigned RetReg = getReg(RetVal);
+ switch (getClassB(RetVal->getType())) {
+ case cByte: // integral return values: extend or move into EAX and return
case cShort:
- // ret short, ushort: Extend value into EAX and return
- if (isUnsigned)
- BuildMI (BB, X86::MOVZXr32r16, 1, X86::EAX).addReg (val);
- else
- BuildMI (BB, X86::MOVSXr32r16, 1, X86::EAX).addReg (val);
- break;
case cInt:
- // ret int, uint, ptr: Move value into EAX and return
- // MOV EAX, <val>
- BuildMI(BB, X86::MOVrr32, 1, X86::EAX).addReg(val);
- break;
-
- // ret float/double: top of FP stack
- // FLD <val>
- case cFloat: // Floats
- BuildMI(BB, X86::FLDr4, 1).addReg(val);
+ promote32(X86::EAX, ValueRecord(RetReg, RetVal->getType()));
+ // Declare that EAX is live on exit
+ BuildMI(BB, X86::IMPLICIT_USE, 2).addReg(X86::EAX).addReg(X86::ESP);
break;
- case cDouble: // Doubles
- BuildMI(BB, X86::FLDr8, 1).addReg(val);
+ case cFP: // Floats & Doubles: Return in ST(0)
+ BuildMI(BB, X86::FpSETRESULT, 1).addReg(RetReg);
+ // Declare that top-of-stack is live on exit
+ BuildMI(BB, X86::IMPLICIT_USE, 2).addReg(X86::ST0).addReg(X86::ESP);
break;
case cLong:
- // ret long: use EAX(least significant 32 bits)/EDX (most
- // significant 32)...uh, I think so Brain, but how do i call
- // up the two parts of the value from inside this mouse
- // cage? *zort*
+ BuildMI(BB, X86::MOVrr32, 1, X86::EAX).addReg(RetReg);
+ BuildMI(BB, X86::MOVrr32, 1, X86::EDX).addReg(RetReg+1);
+ // Declare that EAX & EDX are live on exit
+ BuildMI(BB, X86::IMPLICIT_USE, 3).addReg(X86::EAX).addReg(X86::EDX).addReg(X86::ESP);
+ break;
default:
visitInstruction(I);
}
-
// Emit a 'ret' instruction
BuildMI(BB, X86::RET, 0);
}
+// getBlockAfter - Return the basic block which occurs lexically after the
+// specified one.
+static inline BasicBlock *getBlockAfter(BasicBlock *BB) {
+ Function::iterator I = BB; ++I; // Get iterator to next block
+ return I != BB->getParent()->end() ? &*I : 0;
+}
+
/// visitBranchInst - Handle conditional and unconditional branches here. Note
/// that since code layout is frozen at this point, that if we are trying to
/// jump to a block that is the immediate successor of the current block, we can
-/// just make a fall-through. (but we don't currently).
+/// just make a fall-through (but we don't currently).
///
-void
-ISel::visitBranchInst (BranchInst & BI)
-{
- if (BI.isConditional ())
- {
- BasicBlock *ifTrue = BI.getSuccessor (0);
- BasicBlock *ifFalse = BI.getSuccessor (1); // this is really unobvious
+void ISel::visitBranchInst(BranchInst &BI) {
+ BasicBlock *NextBB = getBlockAfter(BI.getParent()); // BB after current one
+
+ if (!BI.isConditional()) { // Unconditional branch?
+ if (BI.getSuccessor(0) != NextBB)
+ BuildMI(BB, X86::JMP, 1).addPCDisp(BI.getSuccessor(0));
+ return;
+ }
+
+ // See if we can fold the setcc into the branch itself...
+ SetCondInst *SCI = canFoldSetCCIntoBranch(BI.getCondition());
+ if (SCI == 0) {
+ // Nope, cannot fold setcc into this branch. Emit a branch on a condition
+ // computed some other way...
+ unsigned condReg = getReg(BI.getCondition());
+ BuildMI(BB, X86::CMPri8, 2).addReg(condReg).addZImm(0);
+ if (BI.getSuccessor(1) == NextBB) {
+ if (BI.getSuccessor(0) != NextBB)
+ BuildMI(BB, X86::JNE, 1).addPCDisp(BI.getSuccessor(0));
+ } else {
+ BuildMI(BB, X86::JE, 1).addPCDisp(BI.getSuccessor(1));
+
+ if (BI.getSuccessor(0) != NextBB)
+ BuildMI(BB, X86::JMP, 1).addPCDisp(BI.getSuccessor(0));
+ }
+ return;
+ }
+
+ unsigned OpNum = getSetCCNumber(SCI->getOpcode());
+ bool isSigned = EmitComparisonGetSignedness(OpNum, SCI->getOperand(0),
+ SCI->getOperand(1));
+
+ // LLVM -> X86 signed X86 unsigned
+ // ----- ---------- ------------
+ // seteq -> je je
+ // setne -> jne jne
+ // setlt -> jl jb
+ // setge -> jge jae
+ // setgt -> jg ja
+ // setle -> jle jbe
+ static const unsigned OpcodeTab[2][6] = {
+ { X86::JE, X86::JNE, X86::JB, X86::JAE, X86::JA, X86::JBE },
+ { X86::JE, X86::JNE, X86::JL, X86::JGE, X86::JG, X86::JLE },
+ };
+
+ if (BI.getSuccessor(0) != NextBB) {
+ BuildMI(BB, OpcodeTab[isSigned][OpNum], 1).addPCDisp(BI.getSuccessor(0));
+ if (BI.getSuccessor(1) != NextBB)
+ BuildMI(BB, X86::JMP, 1).addPCDisp(BI.getSuccessor(1));
+ } else {
+ // Change to the inverse condition...
+ if (BI.getSuccessor(1) != NextBB) {
+ OpNum ^= 1;
+ BuildMI(BB, OpcodeTab[isSigned][OpNum], 1).addPCDisp(BI.getSuccessor(1));
+ }
+ }
+}
+
+
+/// doCall - This emits an abstract call instruction, setting up the arguments
+/// and the return value as appropriate. For the actual function call itself,
+/// it inserts the specified CallMI instruction into the stream.
+///
+void ISel::doCall(const ValueRecord &Ret, MachineInstr *CallMI,
+ const std::vector<ValueRecord> &Args) {
+
+ // Count how many bytes are to be pushed on the stack...
+ unsigned NumBytes = 0;
+
+ if (!Args.empty()) {
+ for (unsigned i = 0, e = Args.size(); i != e; ++i)
+ switch (getClassB(Args[i].Ty)) {
+ case cByte: case cShort: case cInt:
+ NumBytes += 4; break;
+ case cLong:
+ NumBytes += 8; break;
+ case cFP:
+ NumBytes += Args[i].Ty == Type::FloatTy ? 4 : 8;
+ break;
+ default: assert(0 && "Unknown class!");
+ }
+
+ // Adjust the stack pointer for the new arguments...
+ BuildMI(BB, X86::ADJCALLSTACKDOWN, 1).addZImm(NumBytes);
+
+ // Arguments go on the stack in reverse order, as specified by the ABI.
+ unsigned ArgOffset = 0;
+ for (unsigned i = 0, e = Args.size(); i != e; ++i) {
+ unsigned ArgReg = Args[i].Reg;
+ switch (getClassB(Args[i].Ty)) {
+ case cByte:
+ case cShort: {
+ // Promote arg to 32 bits wide into a temporary register...
+ unsigned R = makeAnotherReg(Type::UIntTy);
+ promote32(R, Args[i]);
+ addRegOffset(BuildMI(BB, X86::MOVrm32, 5),
+ X86::ESP, ArgOffset).addReg(R);
+ break;
+ }
+ case cInt:
+ addRegOffset(BuildMI(BB, X86::MOVrm32, 5),
+ X86::ESP, ArgOffset).addReg(ArgReg);
+ break;
+ case cLong:
+ addRegOffset(BuildMI(BB, X86::MOVrm32, 5),
+ X86::ESP, ArgOffset).addReg(ArgReg);
+ addRegOffset(BuildMI(BB, X86::MOVrm32, 5),
+ X86::ESP, ArgOffset+4).addReg(ArgReg+1);
+ ArgOffset += 4; // 8 byte entry, not 4.
+ break;
+
+ case cFP:
+ if (Args[i].Ty == Type::FloatTy) {
+ addRegOffset(BuildMI(BB, X86::FSTr32, 5),
+ X86::ESP, ArgOffset).addReg(ArgReg);
+ } else {
+ assert(Args[i].Ty == Type::DoubleTy && "Unknown FP type!");
+ addRegOffset(BuildMI(BB, X86::FSTr64, 5),
+ X86::ESP, ArgOffset).addReg(ArgReg);
+ ArgOffset += 4; // 8 byte entry, not 4.
+ }
+ break;
+
+ default: assert(0 && "Unknown class!");
+ }
+ ArgOffset += 4;
+ }
+ } else {
+ BuildMI(BB, X86::ADJCALLSTACKDOWN, 1).addZImm(0);
+ }
- // simplest thing I can think of: compare condition with zero,
- // followed by jump-if-equal to ifFalse, and jump-if-nonequal to
- // ifTrue
- unsigned int condReg = getReg (BI.getCondition ());
- BuildMI (BB, X86::CMPri8, 2).addReg (condReg).addZImm (0);
- BuildMI (BB, X86::JNE, 1).addPCDisp (BI.getSuccessor (0));
- BuildMI (BB, X86::JE, 1).addPCDisp (BI.getSuccessor (1));
+ BB->push_back(CallMI);
+
+ BuildMI(BB, X86::ADJCALLSTACKUP, 1).addZImm(NumBytes);
+
+ // If there is a return value, scavenge the result from the location the call
+ // leaves it in...
+ //
+ if (Ret.Ty != Type::VoidTy) {
+ unsigned DestClass = getClassB(Ret.Ty);
+ switch (DestClass) {
+ case cByte:
+ case cShort:
+ case cInt: {
+ // Integral results are in %eax, or the appropriate portion
+ // thereof.
+ static const unsigned regRegMove[] = {
+ X86::MOVrr8, X86::MOVrr16, X86::MOVrr32
+ };
+ static const unsigned AReg[] = { X86::AL, X86::AX, X86::EAX };
+ BuildMI(BB, regRegMove[DestClass], 1, Ret.Reg).addReg(AReg[DestClass]);
+ break;
}
- else // unconditional branch
- {
- BuildMI (BB, X86::JMP, 1).addPCDisp (BI.getSuccessor (0));
+ case cFP: // Floating-point return values live in %ST(0)
+ BuildMI(BB, X86::FpGETRESULT, 1, Ret.Reg);
+ break;
+ case cLong: // Long values are left in EDX:EAX
+ BuildMI(BB, X86::MOVrr32, 1, Ret.Reg).addReg(X86::EAX);
+ BuildMI(BB, X86::MOVrr32, 1, Ret.Reg+1).addReg(X86::EDX);
+ break;
+ default: assert(0 && "Unknown class!");
+ }
+ }
+}
+
+
+/// visitCallInst - Push args on stack and do a procedure call instruction.
+void ISel::visitCallInst(CallInst &CI) {
+ MachineInstr *TheCall;
+ if (Function *F = CI.getCalledFunction()) {
+ // Is it an intrinsic function call?
+ if (LLVMIntrinsic::ID ID = (LLVMIntrinsic::ID)F->getIntrinsicID()) {
+ visitIntrinsicCall(ID, CI); // Special intrinsics are not handled here
+ return;
}
+
+ // Emit a CALL instruction with PC-relative displacement.
+ TheCall = BuildMI(X86::CALLpcrel32, 1).addGlobalAddress(F, true);
+ } else { // Emit an indirect call...
+ unsigned Reg = getReg(CI.getCalledValue());
+ TheCall = BuildMI(X86::CALLr32, 1).addReg(Reg);
+ }
+
+ std::vector<ValueRecord> Args;
+ for (unsigned i = 1, e = CI.getNumOperands(); i != e; ++i)
+ Args.push_back(ValueRecord(getReg(CI.getOperand(i)),
+ CI.getOperand(i)->getType()));
+
+ unsigned DestReg = CI.getType() != Type::VoidTy ? getReg(CI) : 0;
+ doCall(ValueRecord(DestReg, CI.getType()), TheCall, Args);
+}
+
+void ISel::visitIntrinsicCall(LLVMIntrinsic::ID ID, CallInst &CI) {
+ unsigned TmpReg1, TmpReg2;
+ switch (ID) {
+ case LLVMIntrinsic::va_start:
+ // Get the address of the first vararg value...
+ TmpReg1 = makeAnotherReg(Type::UIntTy);
+ addFrameReference(BuildMI(BB, X86::LEAr32, 5, TmpReg1), VarArgsFrameIndex);
+ TmpReg2 = getReg(CI.getOperand(1));
+ addDirectMem(BuildMI(BB, X86::MOVrm32, 5), TmpReg2).addReg(TmpReg1);
+ return;
+
+ case LLVMIntrinsic::va_end: return; // Noop on X86
+ case LLVMIntrinsic::va_copy:
+ TmpReg1 = getReg(CI.getOperand(2)); // Get existing va_list
+ TmpReg2 = getReg(CI.getOperand(1)); // Get va_list* to store into
+ addDirectMem(BuildMI(BB, X86::MOVrm32, 5), TmpReg2).addReg(TmpReg1);
+ return;
+
+ default: assert(0 && "Unknown intrinsic for X86!");
+ }
}
+/// visitSimpleBinary - Implement simple binary operators for integral types...
+/// OperatorClass is one of: 0 for Add, 1 for Sub, 2 for And, 3 for Or, 4 for
+/// Xor.
+void ISel::visitSimpleBinary(BinaryOperator &B, unsigned OperatorClass) {
+ unsigned DestReg = getReg(B);
+ MachineBasicBlock::iterator MI = BB->end();
+ emitSimpleBinaryOperation(BB, MI, B.getOperand(0), B.getOperand(1),
+ OperatorClass, DestReg);
+}
+
/// visitSimpleBinary - Implement simple binary operators for integral types...
/// OperatorClass is one of: 0 for Add, 1 for Sub, 2 for And, 3 for Or,
/// 4 for Xor.
///
-void ISel::visitSimpleBinary(BinaryOperator &B, unsigned OperatorClass) {
- if (B.getType() == Type::BoolTy) // FIXME: Handle bools for logicals
- visitInstruction(B);
-
- unsigned Class = getClass(B.getType());
- if (Class > 2) // FIXME: Handle longs
- visitInstruction(B);
+/// emitSimpleBinaryOperation - Common code shared between visitSimpleBinary
+/// and constant expression support.
+void ISel::emitSimpleBinaryOperation(MachineBasicBlock *BB,
+ MachineBasicBlock::iterator &IP,
+ Value *Op0, Value *Op1,
+ unsigned OperatorClass,unsigned TargetReg){
+ unsigned Class = getClassB(Op0->getType());
static const unsigned OpcodeTab[][4] = {
// Arithmetic operators
- { X86::ADDrr8, X86::ADDrr16, X86::ADDrr32, 0 }, // ADD
- { X86::SUBrr8, X86::SUBrr16, X86::SUBrr32, 0 }, // SUB
+ { X86::ADDrr8, X86::ADDrr16, X86::ADDrr32, X86::FpADD }, // ADD
+ { X86::SUBrr8, X86::SUBrr16, X86::SUBrr32, X86::FpSUB }, // SUB
// Bitwise operators
{ X86::ANDrr8, X86::ANDrr16, X86::ANDrr32, 0 }, // AND
{ X86:: ORrr8, X86:: ORrr16, X86:: ORrr32, 0 }, // OR
{ X86::XORrr8, X86::XORrr16, X86::XORrr32, 0 }, // XOR
};
+
+ bool isLong = false;
+ if (Class == cLong) {
+ isLong = true;
+ Class = cInt; // Bottom 32 bits are handled just like ints
+ }
unsigned Opcode = OpcodeTab[OperatorClass][Class];
- unsigned Op0r = getReg(B.getOperand(0));
- unsigned Op1r = getReg(B.getOperand(1));
- BuildMI(BB, Opcode, 2, getReg(B)).addReg(Op0r).addReg(Op1r);
+ assert(Opcode && "Floating point arguments to logical inst?");
+ unsigned Op0r = getReg(Op0, BB, IP);
+ unsigned Op1r = getReg(Op1, BB, IP);
+ BMI(BB, IP, Opcode, 2, TargetReg).addReg(Op0r).addReg(Op1r);
+
+ if (isLong) { // Handle the upper 32 bits of long values...
+ static const unsigned TopTab[] = {
+ X86::ADCrr32, X86::SBBrr32, X86::ANDrr32, X86::ORrr32, X86::XORrr32
+ };
+ BMI(BB, IP, TopTab[OperatorClass], 2,
+ TargetReg+1).addReg(Op0r+1).addReg(Op1r+1);
+ }
}
-/// visitMul - Multiplies are not simple binary operators because they must deal
-/// with the EAX register explicitly.
+/// doMultiply - Emit appropriate instructions to multiply together the
+/// registers op0Reg and op1Reg, and put the result in DestReg. The type of the
+/// result should be given as DestTy.
///
-void ISel::visitMul(BinaryOperator &I) {
- unsigned Class = getClass(I.getType());
- if (Class > 2) // FIXME: Handle longs
- visitInstruction(I);
-
+/// FIXME: doMultiply should use one of the two address IMUL instructions!
+///
+void ISel::doMultiply(MachineBasicBlock *MBB, MachineBasicBlock::iterator &MBBI,
+ unsigned DestReg, const Type *DestTy,
+ unsigned op0Reg, unsigned op1Reg) {
+ unsigned Class = getClass(DestTy);
+ switch (Class) {
+ case cFP: // Floating point multiply
+ BMI(BB, MBBI, X86::FpMUL, 2, DestReg).addReg(op0Reg).addReg(op1Reg);
+ return;
+ default:
+ case cLong: assert(0 && "doMultiply cannot operate on LONG values!");
+ case cByte:
+ case cShort:
+ case cInt: // Small integerals, handled below...
+ break;
+ }
+
static const unsigned Regs[] ={ X86::AL , X86::AX , X86::EAX };
- static const unsigned MulOpcode[]={ X86::MULrr8, X86::MULrr16, X86::MULrr32 };
+ static const unsigned MulOpcode[]={ X86::MULr8 , X86::MULr16 , X86::MULr32 };
static const unsigned MovOpcode[]={ X86::MOVrr8, X86::MOVrr16, X86::MOVrr32 };
-
unsigned Reg = Regs[Class];
- unsigned Op0Reg = getReg(I.getOperand(0));
- unsigned Op1Reg = getReg(I.getOperand(1));
- // Put the first operand into one of the A registers...
- BuildMI(BB, MovOpcode[Class], 1, Reg).addReg(Op0Reg);
+ // Emit a MOV to put the first operand into the appropriately-sized
+ // subreg of EAX.
+ BMI(MBB, MBBI, MovOpcode[Class], 1, Reg).addReg(op0Reg);
- // Emit the appropriate multiply instruction...
- BuildMI(BB, MulOpcode[Class], 1).addReg(Op1Reg);
+ // Emit the appropriate multiply instruction.
+ BMI(MBB, MBBI, MulOpcode[Class], 1).addReg(op1Reg);
- // Put the result into the destination register...
- BuildMI(BB, MovOpcode[Class], 1, getReg(I)).addReg(Reg);
+ // Emit another MOV to put the result into the destination register.
+ BMI(MBB, MBBI, MovOpcode[Class], 1, DestReg).addReg(Reg);
+}
+
+/// visitMul - Multiplies are not simple binary operators because they must deal
+/// with the EAX register explicitly.
+///
+void ISel::visitMul(BinaryOperator &I) {
+ unsigned Op0Reg = getReg(I.getOperand(0));
+ unsigned Op1Reg = getReg(I.getOperand(1));
+ unsigned DestReg = getReg(I);
+
+ // Simple scalar multiply?
+ if (I.getType() != Type::LongTy && I.getType() != Type::ULongTy) {
+ MachineBasicBlock::iterator MBBI = BB->end();
+ doMultiply(BB, MBBI, DestReg, I.getType(), Op0Reg, Op1Reg);
+ } else {
+ // Long value. We have to do things the hard way...
+ // Multiply the two low parts... capturing carry into EDX
+ BuildMI(BB, X86::MOVrr32, 1, X86::EAX).addReg(Op0Reg);
+ BuildMI(BB, X86::MULr32, 1).addReg(Op1Reg); // AL*BL
+
+ unsigned OverflowReg = makeAnotherReg(Type::UIntTy);
+ BuildMI(BB, X86::MOVrr32, 1, DestReg).addReg(X86::EAX); // AL*BL
+ BuildMI(BB, X86::MOVrr32, 1, OverflowReg).addReg(X86::EDX); // AL*BL >> 32
+
+ MachineBasicBlock::iterator MBBI = BB->end();
+ unsigned AHBLReg = makeAnotherReg(Type::UIntTy);
+ doMultiply(BB, MBBI, AHBLReg, Type::UIntTy, Op0Reg+1, Op1Reg); // AH*BL
+
+ unsigned AHBLplusOverflowReg = makeAnotherReg(Type::UIntTy);
+ BuildMI(BB, X86::ADDrr32, 2, // AH*BL+(AL*BL >> 32)
+ AHBLplusOverflowReg).addReg(AHBLReg).addReg(OverflowReg);
+
+ MBBI = BB->end();
+ unsigned ALBHReg = makeAnotherReg(Type::UIntTy);
+ doMultiply(BB, MBBI, ALBHReg, Type::UIntTy, Op0Reg, Op1Reg+1); // AL*BH
+
+ BuildMI(BB, X86::ADDrr32, 2, // AL*BH + AH*BL + (AL*BL >> 32)
+ DestReg+1).addReg(AHBLplusOverflowReg).addReg(ALBHReg);
+ }
}
/// instructions work differently for signed and unsigned operands.
///
void ISel::visitDivRem(BinaryOperator &I) {
- unsigned Class = getClass(I.getType());
- if (Class > 2) // FIXME: Handle longs
- visitInstruction(I);
+ unsigned Class = getClass(I.getType());
+ unsigned Op0Reg = getReg(I.getOperand(0));
+ unsigned Op1Reg = getReg(I.getOperand(1));
+ unsigned ResultReg = getReg(I);
+
+ switch (Class) {
+ case cFP: // Floating point divide
+ if (I.getOpcode() == Instruction::Div)
+ BuildMI(BB, X86::FpDIV, 2, ResultReg).addReg(Op0Reg).addReg(Op1Reg);
+ else { // Floating point remainder...
+ MachineInstr *TheCall =
+ BuildMI(X86::CALLpcrel32, 1).addExternalSymbol("fmod", true);
+ std::vector<ValueRecord> Args;
+ Args.push_back(ValueRecord(Op0Reg, Type::DoubleTy));
+ Args.push_back(ValueRecord(Op1Reg, Type::DoubleTy));
+ doCall(ValueRecord(ResultReg, Type::DoubleTy), TheCall, Args);
+ }
+ return;
+ case cLong: {
+ static const char *FnName[] =
+ { "__moddi3", "__divdi3", "__umoddi3", "__udivdi3" };
+
+ unsigned NameIdx = I.getType()->isUnsigned()*2;
+ NameIdx += I.getOpcode() == Instruction::Div;
+ MachineInstr *TheCall =
+ BuildMI(X86::CALLpcrel32, 1).addExternalSymbol(FnName[NameIdx], true);
+
+ std::vector<ValueRecord> Args;
+ Args.push_back(ValueRecord(Op0Reg, Type::LongTy));
+ Args.push_back(ValueRecord(Op1Reg, Type::LongTy));
+ doCall(ValueRecord(ResultReg, Type::LongTy), TheCall, Args);
+ return;
+ }
+ case cByte: case cShort: case cInt:
+ break; // Small integerals, handled below...
+ default: assert(0 && "Unknown class!");
+ }
static const unsigned Regs[] ={ X86::AL , X86::AX , X86::EAX };
static const unsigned MovOpcode[]={ X86::MOVrr8, X86::MOVrr16, X86::MOVrr32 };
static const unsigned ExtRegs[] ={ X86::AH , X86::DX , X86::EDX };
static const unsigned DivOpcode[][4] = {
- { X86::DIVrr8 , X86::DIVrr16 , X86::DIVrr32 , 0 }, // Unsigned division
- { X86::IDIVrr8, X86::IDIVrr16, X86::IDIVrr32, 0 }, // Signed division
+ { X86::DIVr8 , X86::DIVr16 , X86::DIVr32 , 0 }, // Unsigned division
+ { X86::IDIVr8, X86::IDIVr16, X86::IDIVr32, 0 }, // Signed division
};
bool isSigned = I.getType()->isSigned();
unsigned Reg = Regs[Class];
unsigned ExtReg = ExtRegs[Class];
- unsigned Op0Reg = getReg(I.getOperand(0));
- unsigned Op1Reg = getReg(I.getOperand(1));
// Put the first operand into one of the A registers...
BuildMI(BB, MovOpcode[Class], 1, Reg).addReg(Op0Reg);
if (isSigned) {
// Emit a sign extension instruction...
- BuildMI(BB, ExtOpcode[Class], 1, ExtReg).addReg(Reg);
+ BuildMI(BB, ExtOpcode[Class], 0);
} else {
// If unsigned, emit a zeroing instruction... (reg = xor reg, reg)
BuildMI(BB, ClrOpcode[Class], 2, ExtReg).addReg(ExtReg).addReg(ExtReg);
unsigned DestReg = (I.getOpcode() == Instruction::Div) ? Reg : ExtReg;
// Put the result into the destination register...
- BuildMI(BB, MovOpcode[Class], 1, getReg(I)).addReg(DestReg);
+ BuildMI(BB, MovOpcode[Class], 1, ResultReg).addReg(DestReg);
}
/// shift values equal to 1. Even the general case is sort of special,
/// because the shift amount has to be in CL, not just any old register.
///
-void ISel::visitShiftInst (ShiftInst &I) {
- unsigned Op0r = getReg (I.getOperand(0));
+void ISel::visitShiftInst(ShiftInst &I) {
+ unsigned SrcReg = getReg(I.getOperand(0));
unsigned DestReg = getReg(I);
bool isLeftShift = I.getOpcode() == Instruction::Shl;
- bool isOperandSigned = I.getType()->isUnsigned();
- unsigned OperandClass = getClass(I.getType());
-
- if (OperandClass > 2)
- visitInstruction(I); // Can't handle longs yet!
-
- if (ConstantUInt *CUI = dyn_cast <ConstantUInt> (I.getOperand (1)))
- {
- // The shift amount is constant, guaranteed to be a ubyte. Get its value.
- assert(CUI->getType() == Type::UByteTy && "Shift amount not a ubyte?");
- unsigned char shAmt = CUI->getValue();
-
- static const unsigned ConstantOperand[][4] = {
- { X86::SHRir8, X86::SHRir16, X86::SHRir32, 0 }, // SHR
- { X86::SARir8, X86::SARir16, X86::SARir32, 0 }, // SAR
- { X86::SHLir8, X86::SHLir16, X86::SHLir32, 0 }, // SHL
- { X86::SHLir8, X86::SHLir16, X86::SHLir32, 0 }, // SAL = SHL
- };
+ bool isSigned = I.getType()->isSigned();
+ unsigned Class = getClass(I.getType());
+
+ static const unsigned ConstantOperand[][4] = {
+ { X86::SHRir8, X86::SHRir16, X86::SHRir32, X86::SHRDir32 }, // SHR
+ { X86::SARir8, X86::SARir16, X86::SARir32, X86::SHRDir32 }, // SAR
+ { X86::SHLir8, X86::SHLir16, X86::SHLir32, X86::SHLDir32 }, // SHL
+ { X86::SHLir8, X86::SHLir16, X86::SHLir32, X86::SHLDir32 }, // SAL = SHL
+ };
- const unsigned *OpTab = // Figure out the operand table to use
- ConstantOperand[isLeftShift*2+isOperandSigned];
+ static const unsigned NonConstantOperand[][4] = {
+ { X86::SHRrr8, X86::SHRrr16, X86::SHRrr32 }, // SHR
+ { X86::SARrr8, X86::SARrr16, X86::SARrr32 }, // SAR
+ { X86::SHLrr8, X86::SHLrr16, X86::SHLrr32 }, // SHL
+ { X86::SHLrr8, X86::SHLrr16, X86::SHLrr32 }, // SAL = SHL
+ };
- // Emit: <insn> reg, shamt (shift-by-immediate opcode "ir" form.)
- BuildMI(BB, OpTab[OperandClass], 2, DestReg).addReg(Op0r).addZImm(shAmt);
+ // Longs, as usual, are handled specially...
+ if (Class == cLong) {
+ // If we have a constant shift, we can generate much more efficient code
+ // than otherwise...
+ //
+ if (ConstantUInt *CUI = dyn_cast<ConstantUInt>(I.getOperand(1))) {
+ unsigned Amount = CUI->getValue();
+ if (Amount < 32) {
+ const unsigned *Opc = ConstantOperand[isLeftShift*2+isSigned];
+ if (isLeftShift) {
+ BuildMI(BB, Opc[3], 3,
+ DestReg+1).addReg(SrcReg+1).addReg(SrcReg).addZImm(Amount);
+ BuildMI(BB, Opc[2], 2, DestReg).addReg(SrcReg).addZImm(Amount);
+ } else {
+ BuildMI(BB, Opc[3], 3,
+ DestReg).addReg(SrcReg ).addReg(SrcReg+1).addZImm(Amount);
+ BuildMI(BB, Opc[2], 2, DestReg+1).addReg(SrcReg+1).addZImm(Amount);
+ }
+ } else { // Shifting more than 32 bits
+ Amount -= 32;
+ if (isLeftShift) {
+ BuildMI(BB, X86::SHLir32, 2,DestReg+1).addReg(SrcReg).addZImm(Amount);
+ BuildMI(BB, X86::MOVir32, 1,DestReg ).addZImm(0);
+ } else {
+ unsigned Opcode = isSigned ? X86::SARir32 : X86::SHRir32;
+ BuildMI(BB, Opcode, 2, DestReg).addReg(SrcReg+1).addZImm(Amount);
+ BuildMI(BB, X86::MOVir32, 1, DestReg+1).addZImm(0);
+ }
+ }
+ } else {
+ unsigned TmpReg = makeAnotherReg(Type::IntTy);
+
+ if (!isLeftShift && isSigned) {
+ // If this is a SHR of a Long, then we need to do funny sign extension
+ // stuff. TmpReg gets the value to use as the high-part if we are
+ // shifting more than 32 bits.
+ BuildMI(BB, X86::SARir32, 2, TmpReg).addReg(SrcReg).addZImm(31);
+ } else {
+ // Other shifts use a fixed zero value if the shift is more than 32
+ // bits.
+ BuildMI(BB, X86::MOVir32, 1, TmpReg).addZImm(0);
+ }
+
+ // Initialize CL with the shift amount...
+ unsigned ShiftAmount = getReg(I.getOperand(1));
+ BuildMI(BB, X86::MOVrr8, 1, X86::CL).addReg(ShiftAmount);
+
+ unsigned TmpReg2 = makeAnotherReg(Type::IntTy);
+ unsigned TmpReg3 = makeAnotherReg(Type::IntTy);
+ if (isLeftShift) {
+ // TmpReg2 = shld inHi, inLo
+ BuildMI(BB, X86::SHLDrr32, 2, TmpReg2).addReg(SrcReg+1).addReg(SrcReg);
+ // TmpReg3 = shl inLo, CL
+ BuildMI(BB, X86::SHLrr32, 1, TmpReg3).addReg(SrcReg);
+
+ // Set the flags to indicate whether the shift was by more than 32 bits.
+ BuildMI(BB, X86::TESTri8, 2).addReg(X86::CL).addZImm(32);
+
+ // DestHi = (>32) ? TmpReg3 : TmpReg2;
+ BuildMI(BB, X86::CMOVNErr32, 2,
+ DestReg+1).addReg(TmpReg2).addReg(TmpReg3);
+ // DestLo = (>32) ? TmpReg : TmpReg3;
+ BuildMI(BB, X86::CMOVNErr32, 2, DestReg).addReg(TmpReg3).addReg(TmpReg);
+ } else {
+ // TmpReg2 = shrd inLo, inHi
+ BuildMI(BB, X86::SHRDrr32, 2, TmpReg2).addReg(SrcReg).addReg(SrcReg+1);
+ // TmpReg3 = s[ah]r inHi, CL
+ BuildMI(BB, isSigned ? X86::SARrr32 : X86::SHRrr32, 1, TmpReg3)
+ .addReg(SrcReg+1);
+
+ // Set the flags to indicate whether the shift was by more than 32 bits.
+ BuildMI(BB, X86::TESTri8, 2).addReg(X86::CL).addZImm(32);
+
+ // DestLo = (>32) ? TmpReg3 : TmpReg2;
+ BuildMI(BB, X86::CMOVNErr32, 2,
+ DestReg).addReg(TmpReg2).addReg(TmpReg3);
+
+ // DestHi = (>32) ? TmpReg : TmpReg3;
+ BuildMI(BB, X86::CMOVNErr32, 2,
+ DestReg+1).addReg(TmpReg3).addReg(TmpReg);
+ }
}
- else
- {
- // The shift amount is non-constant.
- //
- // In fact, you can only shift with a variable shift amount if
- // that amount is already in the CL register, so we have to put it
- // there first.
- //
+ return;
+ }
- // Emit: move cl, shiftAmount (put the shift amount in CL.)
- BuildMI(BB, X86::MOVrr8, 1, X86::CL).addReg(getReg(I.getOperand(1)));
+ if (ConstantUInt *CUI = dyn_cast<ConstantUInt>(I.getOperand(1))) {
+ // The shift amount is constant, guaranteed to be a ubyte. Get its value.
+ assert(CUI->getType() == Type::UByteTy && "Shift amount not a ubyte?");
- // This is a shift right (SHR).
- static const unsigned NonConstantOperand[][4] = {
- { X86::SHRrr8, X86::SHRrr16, X86::SHRrr32, 0 }, // SHR
- { X86::SARrr8, X86::SARrr16, X86::SARrr32, 0 }, // SAR
- { X86::SHLrr8, X86::SHLrr16, X86::SHLrr32, 0 }, // SHL
- { X86::SHLrr8, X86::SHLrr16, X86::SHLrr32, 0 }, // SAL = SHL
- };
+ const unsigned *Opc = ConstantOperand[isLeftShift*2+isSigned];
+ BuildMI(BB, Opc[Class], 2, DestReg).addReg(SrcReg).addZImm(CUI->getValue());
+ } else { // The shift amount is non-constant.
+ BuildMI(BB, X86::MOVrr8, 1, X86::CL).addReg(getReg(I.getOperand(1)));
- const unsigned *OpTab = // Figure out the operand table to use
- NonConstantOperand[isLeftShift*2+isOperandSigned];
+ const unsigned *Opc = NonConstantOperand[isLeftShift*2+isSigned];
+ BuildMI(BB, Opc[Class], 1, DestReg).addReg(SrcReg);
+ }
+}
- BuildMI(BB, OpTab[OperandClass], 2, DestReg).addReg(Op0r).addReg(X86::CL);
- }
+
+/// doFPLoad - This method is used to load an FP value from memory using the
+/// current endianness. NOTE: This method returns a partially constructed load
+/// instruction which needs to have the memory source filled in still.
+///
+MachineInstr *ISel::doFPLoad(MachineBasicBlock *MBB,
+ MachineBasicBlock::iterator &MBBI,
+ const Type *Ty, unsigned DestReg) {
+ assert(Ty == Type::FloatTy || Ty == Type::DoubleTy && "Unknown FP type!");
+ unsigned LoadOpcode = Ty == Type::FloatTy ? X86::FLDr32 : X86::FLDr64;
+
+ if (TM.getTargetData().isLittleEndian()) // fast path...
+ return BMI(MBB, MBBI, LoadOpcode, 4, DestReg);
+
+ // If we are big-endian, start by creating an LEA instruction to represent the
+ // address of the memory location to load from...
+ //
+ unsigned SrcAddrReg = makeAnotherReg(Type::UIntTy);
+ MachineInstr *Result = BMI(MBB, MBBI, X86::LEAr32, 5, SrcAddrReg);
+
+ // Allocate a temporary stack slot to transform the value into...
+ int FrameIdx = F->getFrameInfo()->CreateStackObject(Ty, TM.getTargetData());
+
+ // Perform the bswaps 32 bits at a time...
+ unsigned TmpReg1 = makeAnotherReg(Type::UIntTy);
+ unsigned TmpReg2 = makeAnotherReg(Type::UIntTy);
+ addDirectMem(BMI(MBB, MBBI, X86::MOVmr32, 4, TmpReg1), SrcAddrReg);
+ BMI(MBB, MBBI, X86::BSWAPr32, 1, TmpReg2).addReg(TmpReg1);
+ unsigned Offset = (Ty == Type::DoubleTy) << 2;
+ addFrameReference(BMI(MBB, MBBI, X86::MOVrm32, 5),
+ FrameIdx, Offset).addReg(TmpReg2);
+
+ if (Ty == Type::DoubleTy) { // Swap the other 32 bits of a double value...
+ TmpReg1 = makeAnotherReg(Type::UIntTy);
+ TmpReg2 = makeAnotherReg(Type::UIntTy);
+
+ addRegOffset(BMI(MBB, MBBI, X86::MOVmr32, 4, TmpReg1), SrcAddrReg, 4);
+ BMI(MBB, MBBI, X86::BSWAPr32, 1, TmpReg2).addReg(TmpReg1);
+ unsigned Offset = (Ty == Type::DoubleTy) << 2;
+ addFrameReference(BMI(MBB, MBBI, X86::MOVrm32,5), FrameIdx).addReg(TmpReg2);
+ }
+
+ // Now we can reload the final byteswapped result into the final destination.
+ addFrameReference(BMI(MBB, MBBI, LoadOpcode, 4, DestReg), FrameIdx);
+ return Result;
+}
+
+/// EmitByteSwap - Byteswap SrcReg into DestReg.
+///
+void ISel::EmitByteSwap(unsigned DestReg, unsigned SrcReg, unsigned Class) {
+ // Emit the byte swap instruction...
+ switch (Class) {
+ case cByte:
+ // No byteswap necessary for 8 bit value...
+ BuildMI(BB, X86::MOVrr8, 1, DestReg).addReg(SrcReg);
+ break;
+ case cInt:
+ // Use the 32 bit bswap instruction to do a 32 bit swap...
+ BuildMI(BB, X86::BSWAPr32, 1, DestReg).addReg(SrcReg);
+ break;
+
+ case cShort:
+ // For 16 bit we have to use an xchg instruction, because there is no
+ // 16-bit bswap. XCHG is necessarily not in SSA form, so we force things
+ // into AX to do the xchg.
+ //
+ BuildMI(BB, X86::MOVrr16, 1, X86::AX).addReg(SrcReg);
+ BuildMI(BB, X86::XCHGrr8, 2).addReg(X86::AL, MOTy::UseAndDef)
+ .addReg(X86::AH, MOTy::UseAndDef);
+ BuildMI(BB, X86::MOVrr16, 1, DestReg).addReg(X86::AX);
+ break;
+ default: assert(0 && "Cannot byteswap this class!");
+ }
}
/// visitLoadInst - Implement LLVM load instructions in terms of the x86 'mov'
-/// instruction.
+/// instruction. The load and store instructions are the only place where we
+/// need to worry about the memory layout of the target machine.
///
void ISel::visitLoadInst(LoadInst &I) {
+ bool isLittleEndian = TM.getTargetData().isLittleEndian();
+ bool hasLongPointers = TM.getTargetData().getPointerSize() == 8;
+ unsigned SrcAddrReg = getReg(I.getOperand(0));
+ unsigned DestReg = getReg(I);
+
unsigned Class = getClass(I.getType());
- if (Class > 2) // FIXME: Handle longs and others...
- visitInstruction(I);
+ switch (Class) {
+ case cFP: {
+ MachineBasicBlock::iterator MBBI = BB->end();
+ addDirectMem(doFPLoad(BB, MBBI, I.getType(), DestReg), SrcAddrReg);
+ return;
+ }
+ case cLong: case cInt: case cShort: case cByte:
+ break; // Integers of various sizes handled below
+ default: assert(0 && "Unknown memory class!");
+ }
+
+ // We need to adjust the input pointer if we are emulating a big-endian
+ // long-pointer target. On these systems, the pointer that we are interested
+ // in is in the upper part of the eight byte memory image of the pointer. It
+ // also happens to be byte-swapped, but this will be handled later.
+ //
+ if (!isLittleEndian && hasLongPointers && isa<PointerType>(I.getType())) {
+ unsigned R = makeAnotherReg(Type::UIntTy);
+ BuildMI(BB, X86::ADDri32, 2, R).addReg(SrcAddrReg).addZImm(4);
+ SrcAddrReg = R;
+ }
- static const unsigned Opcode[] = { X86::MOVmr8, X86::MOVmr16, X86::MOVmr32 };
+ unsigned IReg = DestReg;
+ if (!isLittleEndian) // If big endian we need an intermediate stage
+ DestReg = makeAnotherReg(Class != cLong ? I.getType() : Type::UIntTy);
- unsigned AddressReg = getReg(I.getOperand(0));
- addDirectMem(BuildMI(BB, Opcode[Class], 4, getReg(I)), AddressReg);
+ static const unsigned Opcode[] = {
+ X86::MOVmr8, X86::MOVmr16, X86::MOVmr32, 0, X86::MOVmr32
+ };
+ addDirectMem(BuildMI(BB, Opcode[Class], 4, DestReg), SrcAddrReg);
+
+ // Handle long values now...
+ if (Class == cLong) {
+ if (isLittleEndian) {
+ addRegOffset(BuildMI(BB, X86::MOVmr32, 4, DestReg+1), SrcAddrReg, 4);
+ } else {
+ EmitByteSwap(IReg+1, DestReg, cInt);
+ unsigned TempReg = makeAnotherReg(Type::IntTy);
+ addRegOffset(BuildMI(BB, X86::MOVmr32, 4, TempReg), SrcAddrReg, 4);
+ EmitByteSwap(IReg, TempReg, cInt);
+ }
+ return;
+ }
+
+ if (!isLittleEndian)
+ EmitByteSwap(IReg, DestReg, Class);
+}
+
+
+/// doFPStore - This method is used to store an FP value to memory using the
+/// current endianness.
+///
+void ISel::doFPStore(const Type *Ty, unsigned DestAddrReg, unsigned SrcReg) {
+ assert(Ty == Type::FloatTy || Ty == Type::DoubleTy && "Unknown FP type!");
+ unsigned StoreOpcode = Ty == Type::FloatTy ? X86::FSTr32 : X86::FSTr64;
+
+ if (TM.getTargetData().isLittleEndian()) { // fast path...
+ addDirectMem(BuildMI(BB, StoreOpcode,5), DestAddrReg).addReg(SrcReg);
+ return;
+ }
+
+ // Allocate a temporary stack slot to transform the value into...
+ int FrameIdx = F->getFrameInfo()->CreateStackObject(Ty, TM.getTargetData());
+ unsigned SrcAddrReg = makeAnotherReg(Type::UIntTy);
+ addFrameReference(BuildMI(BB, X86::LEAr32, 5, SrcAddrReg), FrameIdx);
+
+ // Store the value into a temporary stack slot...
+ addDirectMem(BuildMI(BB, StoreOpcode, 5), SrcAddrReg).addReg(SrcReg);
+
+ // Perform the bswaps 32 bits at a time...
+ unsigned TmpReg1 = makeAnotherReg(Type::UIntTy);
+ unsigned TmpReg2 = makeAnotherReg(Type::UIntTy);
+ addDirectMem(BuildMI(BB, X86::MOVmr32, 4, TmpReg1), SrcAddrReg);
+ BuildMI(BB, X86::BSWAPr32, 1, TmpReg2).addReg(TmpReg1);
+ unsigned Offset = (Ty == Type::DoubleTy) << 2;
+ addRegOffset(BuildMI(BB, X86::MOVrm32, 5),
+ DestAddrReg, Offset).addReg(TmpReg2);
+
+ if (Ty == Type::DoubleTy) { // Swap the other 32 bits of a double value...
+ TmpReg1 = makeAnotherReg(Type::UIntTy);
+ TmpReg2 = makeAnotherReg(Type::UIntTy);
+
+ addRegOffset(BuildMI(BB, X86::MOVmr32, 4, TmpReg1), SrcAddrReg, 4);
+ BuildMI(BB, X86::BSWAPr32, 1, TmpReg2).addReg(TmpReg1);
+ unsigned Offset = (Ty == Type::DoubleTy) << 2;
+ addDirectMem(BuildMI(BB, X86::MOVrm32, 5), DestAddrReg).addReg(TmpReg2);
+ }
}
/// instruction.
///
void ISel::visitStoreInst(StoreInst &I) {
+ bool isLittleEndian = TM.getTargetData().isLittleEndian();
+ bool hasLongPointers = TM.getTargetData().getPointerSize() == 8;
+ unsigned ValReg = getReg(I.getOperand(0));
+ unsigned AddressReg = getReg(I.getOperand(1));
+
unsigned Class = getClass(I.getOperand(0)->getType());
- if (Class > 2) // FIXME: Handle longs and others...
- visitInstruction(I);
+ switch (Class) {
+ case cLong:
+ if (isLittleEndian) {
+ addDirectMem(BuildMI(BB, X86::MOVrm32, 1+4), AddressReg).addReg(ValReg);
+ addRegOffset(BuildMI(BB, X86::MOVrm32, 1+4),
+ AddressReg, 4).addReg(ValReg+1);
+ } else {
+ unsigned T1 = makeAnotherReg(Type::IntTy);
+ unsigned T2 = makeAnotherReg(Type::IntTy);
+ EmitByteSwap(T1, ValReg , cInt);
+ EmitByteSwap(T2, ValReg+1, cInt);
+ addDirectMem(BuildMI(BB, X86::MOVrm32, 1+4), AddressReg).addReg(T2);
+ addRegOffset(BuildMI(BB, X86::MOVrm32, 1+4), AddressReg, 4).addReg(T1);
+ }
+ return;
+ case cFP:
+ doFPStore(I.getOperand(0)->getType(), AddressReg, ValReg);
+ return;
+ case cInt: case cShort: case cByte:
+ break; // Integers of various sizes handled below
+ default: assert(0 && "Unknown memory class!");
+ }
- static const unsigned Opcode[] = { X86::MOVrm8, X86::MOVrm16, X86::MOVrm32 };
+ if (!isLittleEndian && hasLongPointers &&
+ isa<PointerType>(I.getOperand(0)->getType())) {
+ unsigned R = makeAnotherReg(Type::UIntTy);
+ BuildMI(BB, X86::ADDri32, 2, R).addReg(AddressReg).addZImm(4);
+ AddressReg = R;
+ }
+
+ if (!isLittleEndian && Class != cByte) {
+ unsigned R = makeAnotherReg(I.getOperand(0)->getType());
+ EmitByteSwap(R, ValReg, Class);
+ ValReg = R;
+ }
- unsigned ValReg = getReg(I.getOperand(0));
- unsigned AddressReg = getReg(I.getOperand(1));
+ static const unsigned Opcode[] = { X86::MOVrm8, X86::MOVrm16, X86::MOVrm32 };
addDirectMem(BuildMI(BB, Opcode[Class], 1+4), AddressReg).addReg(ValReg);
}
-/// visitPHINode - Turn an LLVM PHI node into an X86 PHI node...
-///
-void ISel::visitPHINode(PHINode &PN) {
- MachineInstr *MI = BuildMI(BB, X86::PHI, PN.getNumOperands(), getReg(PN));
+/// visitCastInst - Here we have various kinds of copying with or without
+/// sign extension going on.
+void ISel::visitCastInst(CastInst &CI) {
+ unsigned DestReg = getReg(CI);
+ MachineBasicBlock::iterator MI = BB->end();
+ emitCastOperation(BB, MI, CI.getOperand(0), CI.getType(), DestReg);
+}
+
+/// emitCastOperation - Common code shared between visitCastInst and
+/// constant expression cast support.
+void ISel::emitCastOperation(MachineBasicBlock *BB,
+ MachineBasicBlock::iterator &IP,
+ Value *Src, const Type *DestTy,
+ unsigned DestReg) {
+ unsigned SrcReg = getReg(Src, BB, IP);
+ const Type *SrcTy = Src->getType();
+ unsigned SrcClass = getClassB(SrcTy);
+ unsigned DestClass = getClassB(DestTy);
+
+ // Implement casts to bool by using compare on the operand followed by set if
+ // not zero on the result.
+ if (DestTy == Type::BoolTy) {
+ switch (SrcClass) {
+ case cByte:
+ BMI(BB, IP, X86::TESTrr8, 2).addReg(SrcReg).addReg(SrcReg);
+ break;
+ case cShort:
+ BMI(BB, IP, X86::TESTrr16, 2).addReg(SrcReg).addReg(SrcReg);
+ break;
+ case cInt:
+ BMI(BB, IP, X86::TESTrr32, 2).addReg(SrcReg).addReg(SrcReg);
+ break;
+ case cLong: {
+ unsigned TmpReg = makeAnotherReg(Type::IntTy);
+ BMI(BB, IP, X86::ORrr32, 2, TmpReg).addReg(SrcReg).addReg(SrcReg+1);
+ break;
+ }
+ case cFP:
+ assert(0 && "FIXME: implement cast FP to bool");
+ abort();
+ }
+
+ // If the zero flag is not set, then the value is true, set the byte to
+ // true.
+ BMI(BB, IP, X86::SETNEr, 1, DestReg);
+ return;
+ }
+
+ static const unsigned RegRegMove[] = {
+ X86::MOVrr8, X86::MOVrr16, X86::MOVrr32, X86::FpMOV, X86::MOVrr32
+ };
+
+ // Implement casts between values of the same type class (as determined by
+ // getClass) by using a register-to-register move.
+ if (SrcClass == DestClass) {
+ if (SrcClass <= cInt || (SrcClass == cFP && SrcTy == DestTy)) {
+ BMI(BB, IP, RegRegMove[SrcClass], 1, DestReg).addReg(SrcReg);
+ } else if (SrcClass == cFP) {
+ if (SrcTy == Type::FloatTy) { // double -> float
+ assert(DestTy == Type::DoubleTy && "Unknown cFP member!");
+ BMI(BB, IP, X86::FpMOV, 1, DestReg).addReg(SrcReg);
+ } else { // float -> double
+ assert(SrcTy == Type::DoubleTy && DestTy == Type::FloatTy &&
+ "Unknown cFP member!");
+ // Truncate from double to float by storing to memory as short, then
+ // reading it back.
+ unsigned FltAlign = TM.getTargetData().getFloatAlignment();
+ int FrameIdx = F->getFrameInfo()->CreateStackObject(4, FltAlign);
+ addFrameReference(BMI(BB, IP, X86::FSTr32, 5), FrameIdx).addReg(SrcReg);
+ addFrameReference(BMI(BB, IP, X86::FLDr32, 5, DestReg), FrameIdx);
+ }
+ } else if (SrcClass == cLong) {
+ BMI(BB, IP, X86::MOVrr32, 1, DestReg).addReg(SrcReg);
+ BMI(BB, IP, X86::MOVrr32, 1, DestReg+1).addReg(SrcReg+1);
+ } else {
+ assert(0 && "Cannot handle this type of cast instruction!");
+ abort();
+ }
+ return;
+ }
+
+ // Handle cast of SMALLER int to LARGER int using a move with sign extension
+ // or zero extension, depending on whether the source type was signed.
+ if (SrcClass <= cInt && (DestClass <= cInt || DestClass == cLong) &&
+ SrcClass < DestClass) {
+ bool isLong = DestClass == cLong;
+ if (isLong) DestClass = cInt;
+
+ static const unsigned Opc[][4] = {
+ { X86::MOVSXr16r8, X86::MOVSXr32r8, X86::MOVSXr32r16, X86::MOVrr32 }, // s
+ { X86::MOVZXr16r8, X86::MOVZXr32r8, X86::MOVZXr32r16, X86::MOVrr32 } // u
+ };
+
+ bool isUnsigned = SrcTy->isUnsigned();
+ BMI(BB, IP, Opc[isUnsigned][SrcClass + DestClass - 1], 1,
+ DestReg).addReg(SrcReg);
+
+ if (isLong) { // Handle upper 32 bits as appropriate...
+ if (isUnsigned) // Zero out top bits...
+ BMI(BB, IP, X86::MOVir32, 1, DestReg+1).addZImm(0);
+ else // Sign extend bottom half...
+ BMI(BB, IP, X86::SARir32, 2, DestReg+1).addReg(DestReg).addZImm(31);
+ }
+ return;
+ }
- for (unsigned i = 0, e = PN.getNumIncomingValues(); i != e; ++i) {
- // FIXME: This will put constants after the PHI nodes in the block, which
- // is invalid. They should be put inline into the PHI node eventually.
+ // Special case long -> int ...
+ if (SrcClass == cLong && DestClass == cInt) {
+ BMI(BB, IP, X86::MOVrr32, 1, DestReg).addReg(SrcReg);
+ return;
+ }
+
+ // Handle cast of LARGER int to SMALLER int using a move to EAX followed by a
+ // move out of AX or AL.
+ if ((SrcClass <= cInt || SrcClass == cLong) && DestClass <= cInt
+ && SrcClass > DestClass) {
+ static const unsigned AReg[] = { X86::AL, X86::AX, X86::EAX, 0, X86::EAX };
+ BMI(BB, IP, RegRegMove[SrcClass], 1, AReg[SrcClass]).addReg(SrcReg);
+ BMI(BB, IP, RegRegMove[DestClass], 1, DestReg).addReg(AReg[DestClass]);
+ return;
+ }
+
+ // Handle casts from integer to floating point now...
+ if (DestClass == cFP) {
+ // Promote the integer to a type supported by FLD. We do this because there
+ // are no unsigned FLD instructions, so we must promote an unsigned value to
+ // a larger signed value, then use FLD on the larger value.
//
- MI->addRegOperand(getReg(PN.getIncomingValue(i)));
- MI->addPCDispOperand(PN.getIncomingBlock(i));
+ const Type *PromoteType = 0;
+ unsigned PromoteOpcode;
+ switch (SrcTy->getPrimitiveID()) {
+ case Type::BoolTyID:
+ case Type::SByteTyID:
+ // We don't have the facilities for directly loading byte sized data from
+ // memory (even signed). Promote it to 16 bits.
+ PromoteType = Type::ShortTy;
+ PromoteOpcode = X86::MOVSXr16r8;
+ break;
+ case Type::UByteTyID:
+ PromoteType = Type::ShortTy;
+ PromoteOpcode = X86::MOVZXr16r8;
+ break;
+ case Type::UShortTyID:
+ PromoteType = Type::IntTy;
+ PromoteOpcode = X86::MOVZXr32r16;
+ break;
+ case Type::UIntTyID: {
+ // Make a 64 bit temporary... and zero out the top of it...
+ unsigned TmpReg = makeAnotherReg(Type::LongTy);
+ BMI(BB, IP, X86::MOVrr32, 1, TmpReg).addReg(SrcReg);
+ BMI(BB, IP, X86::MOVir32, 1, TmpReg+1).addZImm(0);
+ SrcTy = Type::LongTy;
+ SrcClass = cLong;
+ SrcReg = TmpReg;
+ break;
+ }
+ case Type::ULongTyID:
+ assert("FIXME: not implemented: cast ulong X to fp type!");
+ default: // No promotion needed...
+ break;
+ }
+
+ if (PromoteType) {
+ unsigned TmpReg = makeAnotherReg(PromoteType);
+ BMI(BB, IP, SrcTy->isSigned() ? X86::MOVSXr16r8 : X86::MOVZXr16r8,
+ 1, TmpReg).addReg(SrcReg);
+ SrcTy = PromoteType;
+ SrcClass = getClass(PromoteType);
+ SrcReg = TmpReg;
+ }
+
+ // Spill the integer to memory and reload it from there...
+ int FrameIdx =
+ F->getFrameInfo()->CreateStackObject(SrcTy, TM.getTargetData());
+
+ if (SrcClass == cLong) {
+ addFrameReference(BMI(BB, IP, X86::MOVrm32, 5), FrameIdx).addReg(SrcReg);
+ addFrameReference(BMI(BB, IP, X86::MOVrm32, 5),
+ FrameIdx, 4).addReg(SrcReg+1);
+ } else {
+ static const unsigned Op1[] = { X86::MOVrm8, X86::MOVrm16, X86::MOVrm32 };
+ addFrameReference(BMI(BB, IP, Op1[SrcClass], 5), FrameIdx).addReg(SrcReg);
+ }
+
+ static const unsigned Op2[] =
+ { 0/*byte*/, X86::FILDr16, X86::FILDr32, 0/*FP*/, X86::FILDr64 };
+ addFrameReference(BMI(BB, IP, Op2[SrcClass], 5, DestReg), FrameIdx);
+ return;
+ }
+
+ // Handle casts from floating point to integer now...
+ if (SrcClass == cFP) {
+ // Change the floating point control register to use "round towards zero"
+ // mode when truncating to an integer value.
+ //
+ int CWFrameIdx = F->getFrameInfo()->CreateStackObject(2, 2);
+ addFrameReference(BMI(BB, IP, X86::FNSTCWm16, 4), CWFrameIdx);
+
+ // Load the old value of the high byte of the control word...
+ unsigned HighPartOfCW = makeAnotherReg(Type::UByteTy);
+ addFrameReference(BMI(BB, IP, X86::MOVmr8, 4, HighPartOfCW), CWFrameIdx, 1);
+
+ // Set the high part to be round to zero...
+ addFrameReference(BMI(BB, IP, X86::MOVim8, 5), CWFrameIdx, 1).addZImm(12);
+
+ // Reload the modified control word now...
+ addFrameReference(BMI(BB, IP, X86::FLDCWm16, 4), CWFrameIdx);
+
+ // Restore the memory image of control word to original value
+ addFrameReference(BMI(BB, IP, X86::MOVrm8, 5),
+ CWFrameIdx, 1).addReg(HighPartOfCW);
+
+ // We don't have the facilities for directly storing byte sized data to
+ // memory. Promote it to 16 bits. We also must promote unsigned values to
+ // larger classes because we only have signed FP stores.
+ unsigned StoreClass = DestClass;
+ const Type *StoreTy = DestTy;
+ if (StoreClass == cByte || DestTy->isUnsigned())
+ switch (StoreClass) {
+ case cByte: StoreTy = Type::ShortTy; StoreClass = cShort; break;
+ case cShort: StoreTy = Type::IntTy; StoreClass = cInt; break;
+ case cInt: StoreTy = Type::LongTy; StoreClass = cLong; break;
+ case cLong:
+ assert(0 &&"FIXME not implemented: cast FP to unsigned long long");
+ abort();
+ default: assert(0 && "Unknown store class!");
+ }
+
+ // Spill the integer to memory and reload it from there...
+ int FrameIdx =
+ F->getFrameInfo()->CreateStackObject(StoreTy, TM.getTargetData());
+
+ static const unsigned Op1[] =
+ { 0, X86::FISTr16, X86::FISTr32, 0, X86::FISTPr64 };
+ addFrameReference(BMI(BB, IP, Op1[StoreClass], 5), FrameIdx).addReg(SrcReg);
+
+ if (DestClass == cLong) {
+ addFrameReference(BMI(BB, IP, X86::MOVmr32, 4, DestReg), FrameIdx);
+ addFrameReference(BMI(BB, IP, X86::MOVmr32, 4, DestReg+1), FrameIdx, 4);
+ } else {
+ static const unsigned Op2[] = { X86::MOVmr8, X86::MOVmr16, X86::MOVmr32 };
+ addFrameReference(BMI(BB, IP, Op2[DestClass], 4, DestReg), FrameIdx);
+ }
+
+ // Reload the original control word now...
+ addFrameReference(BMI(BB, IP, X86::FLDCWm16, 4), CWFrameIdx);
+ return;
+ }
+
+ // Anything we haven't handled already, we can't (yet) handle at all.
+ assert(0 && "Unhandled cast instruction!");
+ abort();
+}
+
+/// visitVarArgInst - Implement the va_arg instruction...
+///
+void ISel::visitVarArgInst(VarArgInst &I) {
+ unsigned SrcReg = getReg(I.getOperand(0));
+ unsigned DestReg = getReg(I);
+
+ // Load the va_list into a register...
+ unsigned VAList = makeAnotherReg(Type::UIntTy);
+ addDirectMem(BuildMI(BB, X86::MOVmr32, 4, VAList), SrcReg);
+
+ unsigned Size;
+ switch (I.getType()->getPrimitiveID()) {
+ default:
+ std::cerr << I;
+ assert(0 && "Error: bad type for va_arg instruction!");
+ return;
+ case Type::PointerTyID:
+ case Type::UIntTyID:
+ case Type::IntTyID:
+ Size = 4;
+ addDirectMem(BuildMI(BB, X86::MOVmr32, 4, DestReg), VAList);
+ break;
+ case Type::ULongTyID:
+ case Type::LongTyID:
+ Size = 8;
+ addDirectMem(BuildMI(BB, X86::MOVmr32, 4, DestReg), VAList);
+ addRegOffset(BuildMI(BB, X86::MOVmr32, 4, DestReg+1), VAList, 4);
+ break;
+ case Type::DoubleTyID:
+ Size = 8;
+ addDirectMem(BuildMI(BB, X86::FLDr64, 4, DestReg), VAList);
+ break;
+ }
+
+ // Increment the VAList pointer...
+ unsigned NextVAList = makeAnotherReg(Type::UIntTy);
+ BuildMI(BB, X86::ADDri32, 2, NextVAList).addReg(VAList).addZImm(Size);
+
+ // Update the VAList in memory...
+ addDirectMem(BuildMI(BB, X86::MOVrm32, 5), SrcReg).addReg(NextVAList);
+}
+
+
+// ExactLog2 - This function solves for (Val == 1 << (N-1)) and returns N. It
+// returns zero when the input is not exactly a power of two.
+static unsigned ExactLog2(unsigned Val) {
+ if (Val == 0) return 0;
+ unsigned Count = 0;
+ while (Val != 1) {
+ if (Val & 1) return 0;
+ Val >>= 1;
+ ++Count;
}
+ return Count+1;
}
+void ISel::visitGetElementPtrInst(GetElementPtrInst &I) {
+ unsigned outputReg = getReg(I);
+ MachineBasicBlock::iterator MI = BB->end();
+ emitGEPOperation(BB, MI, I.getOperand(0),
+ I.op_begin()+1, I.op_end(), outputReg);
+}
+
+void ISel::emitGEPOperation(MachineBasicBlock *MBB,
+ MachineBasicBlock::iterator &IP,
+ Value *Src, User::op_iterator IdxBegin,
+ User::op_iterator IdxEnd, unsigned TargetReg) {
+ const TargetData &TD = TM.getTargetData();
+ const Type *Ty = Src->getType();
+ unsigned BaseReg = getReg(Src, MBB, IP);
+
+ // GEPs have zero or more indices; we must perform a struct access
+ // or array access for each one.
+ for (GetElementPtrInst::op_iterator oi = IdxBegin,
+ oe = IdxEnd; oi != oe; ++oi) {
+ Value *idx = *oi;
+ unsigned NextReg = BaseReg;
+ if (const StructType *StTy = dyn_cast<StructType>(Ty)) {
+ // It's a struct access. idx is the index into the structure,
+ // which names the field. This index must have ubyte type.
+ const ConstantUInt *CUI = cast<ConstantUInt>(idx);
+ assert(CUI->getType() == Type::UByteTy
+ && "Funny-looking structure index in GEP");
+ // Use the TargetData structure to pick out what the layout of
+ // the structure is in memory. Since the structure index must
+ // be constant, we can get its value and use it to find the
+ // right byte offset from the StructLayout class's list of
+ // structure member offsets.
+ unsigned idxValue = CUI->getValue();
+ unsigned FieldOff = TD.getStructLayout(StTy)->MemberOffsets[idxValue];
+ if (FieldOff) {
+ NextReg = makeAnotherReg(Type::UIntTy);
+ // Emit an ADD to add FieldOff to the basePtr.
+ BMI(MBB, IP, X86::ADDri32, 2,NextReg).addReg(BaseReg).addZImm(FieldOff);
+ }
+ // The next type is the member of the structure selected by the
+ // index.
+ Ty = StTy->getElementTypes()[idxValue];
+ } else if (const SequentialType *SqTy = cast<SequentialType>(Ty)) {
+ // It's an array or pointer access: [ArraySize x ElementType].
+
+ // idx is the index into the array. Unlike with structure
+ // indices, we may not know its actual value at code-generation
+ // time.
+ assert(idx->getType() == Type::LongTy && "Bad GEP array index!");
+
+ // We want to add BaseReg to(idxReg * sizeof ElementType). First, we
+ // must find the size of the pointed-to type (Not coincidentally, the next
+ // type is the type of the elements in the array).
+ Ty = SqTy->getElementType();
+ unsigned elementSize = TD.getTypeSize(Ty);
+
+ // If idxReg is a constant, we don't need to perform the multiply!
+ if (ConstantSInt *CSI = dyn_cast<ConstantSInt>(idx)) {
+ if (!CSI->isNullValue()) {
+ unsigned Offset = elementSize*CSI->getValue();
+ NextReg = makeAnotherReg(Type::UIntTy);
+ BMI(MBB, IP, X86::ADDri32, 2,NextReg).addReg(BaseReg).addZImm(Offset);
+ }
+ } else if (elementSize == 1) {
+ // If the element size is 1, we don't have to multiply, just add
+ unsigned idxReg = getReg(idx, MBB, IP);
+ NextReg = makeAnotherReg(Type::UIntTy);
+ BMI(MBB, IP, X86::ADDrr32, 2, NextReg).addReg(BaseReg).addReg(idxReg);
+ } else {
+ unsigned idxReg = getReg(idx, MBB, IP);
+ unsigned OffsetReg = makeAnotherReg(Type::UIntTy);
+ if (unsigned Shift = ExactLog2(elementSize)) {
+ // If the element size is exactly a power of 2, use a shift to get it.
+ BMI(MBB, IP, X86::SHLir32, 2,
+ OffsetReg).addReg(idxReg).addZImm(Shift-1);
+ } else {
+ // Most general case, emit a multiply...
+ unsigned elementSizeReg = makeAnotherReg(Type::LongTy);
+ BMI(MBB, IP, X86::MOVir32, 1, elementSizeReg).addZImm(elementSize);
+
+ // Emit a MUL to multiply the register holding the index by
+ // elementSize, putting the result in OffsetReg.
+ doMultiply(MBB, IP, OffsetReg, Type::IntTy, idxReg, elementSizeReg);
+ }
+ // Emit an ADD to add OffsetReg to the basePtr.
+ NextReg = makeAnotherReg(Type::UIntTy);
+ BMI(MBB, IP, X86::ADDrr32, 2,NextReg).addReg(BaseReg).addReg(OffsetReg);
+ }
+ }
+ // Now that we are here, further indices refer to subtypes of this
+ // one, so we don't need to worry about BaseReg itself, anymore.
+ BaseReg = NextReg;
+ }
+ // After we have processed all the indices, the result is left in
+ // BaseReg. Move it to the register where we were expected to
+ // put the answer. A 32-bit move should do it, because we are in
+ // ILP32 land.
+ BMI(MBB, IP, X86::MOVrr32, 1, TargetReg).addReg(BaseReg);
+}
+
+
+/// visitAllocaInst - If this is a fixed size alloca, allocate space from the
+/// frame manager, otherwise do it the hard way.
+///
+void ISel::visitAllocaInst(AllocaInst &I) {
+ // Find the data size of the alloca inst's getAllocatedType.
+ const Type *Ty = I.getAllocatedType();
+ unsigned TySize = TM.getTargetData().getTypeSize(Ty);
+
+ // If this is a fixed size alloca in the entry block for the function,
+ // statically stack allocate the space.
+ //
+ if (ConstantUInt *CUI = dyn_cast<ConstantUInt>(I.getArraySize())) {
+ if (I.getParent() == I.getParent()->getParent()->begin()) {
+ TySize *= CUI->getValue(); // Get total allocated size...
+ unsigned Alignment = TM.getTargetData().getTypeAlignment(Ty);
+
+ // Create a new stack object using the frame manager...
+ int FrameIdx = F->getFrameInfo()->CreateStackObject(TySize, Alignment);
+ addFrameReference(BuildMI(BB, X86::LEAr32, 5, getReg(I)), FrameIdx);
+ return;
+ }
+ }
+
+ // Create a register to hold the temporary result of multiplying the type size
+ // constant by the variable amount.
+ unsigned TotalSizeReg = makeAnotherReg(Type::UIntTy);
+ unsigned SrcReg1 = getReg(I.getArraySize());
+ unsigned SizeReg = makeAnotherReg(Type::UIntTy);
+ BuildMI(BB, X86::MOVir32, 1, SizeReg).addZImm(TySize);
+
+ // TotalSizeReg = mul <numelements>, <TypeSize>
+ MachineBasicBlock::iterator MBBI = BB->end();
+ doMultiply(BB, MBBI, TotalSizeReg, Type::UIntTy, SrcReg1, SizeReg);
+
+ // AddedSize = add <TotalSizeReg>, 15
+ unsigned AddedSizeReg = makeAnotherReg(Type::UIntTy);
+ BuildMI(BB, X86::ADDri32, 2, AddedSizeReg).addReg(TotalSizeReg).addZImm(15);
+
+ // AlignedSize = and <AddedSize>, ~15
+ unsigned AlignedSize = makeAnotherReg(Type::UIntTy);
+ BuildMI(BB, X86::ANDri32, 2, AlignedSize).addReg(AddedSizeReg).addZImm(~15);
+
+ // Subtract size from stack pointer, thereby allocating some space.
+ BuildMI(BB, X86::SUBrr32, 2, X86::ESP).addReg(X86::ESP).addReg(AlignedSize);
+
+ // Put a pointer to the space into the result register, by copying
+ // the stack pointer.
+ BuildMI(BB, X86::MOVrr32, 1, getReg(I)).addReg(X86::ESP);
+
+ // Inform the Frame Information that we have just allocated a variable-sized
+ // object.
+ F->getFrameInfo()->CreateVariableSizedObject();
+}
+
+/// visitMallocInst - Malloc instructions are code generated into direct calls
+/// to the library malloc.
+///
+void ISel::visitMallocInst(MallocInst &I) {
+ unsigned AllocSize = TM.getTargetData().getTypeSize(I.getAllocatedType());
+ unsigned Arg;
+
+ if (ConstantUInt *C = dyn_cast<ConstantUInt>(I.getOperand(0))) {
+ Arg = getReg(ConstantUInt::get(Type::UIntTy, C->getValue() * AllocSize));
+ } else {
+ Arg = makeAnotherReg(Type::UIntTy);
+ unsigned Op0Reg = getReg(ConstantUInt::get(Type::UIntTy, AllocSize));
+ unsigned Op1Reg = getReg(I.getOperand(0));
+ MachineBasicBlock::iterator MBBI = BB->end();
+ doMultiply(BB, MBBI, Arg, Type::UIntTy, Op0Reg, Op1Reg);
+
+
+ }
+
+ std::vector<ValueRecord> Args;
+ Args.push_back(ValueRecord(Arg, Type::UIntTy));
+ MachineInstr *TheCall = BuildMI(X86::CALLpcrel32,
+ 1).addExternalSymbol("malloc", true);
+ doCall(ValueRecord(getReg(I), I.getType()), TheCall, Args);
+}
+
+
+/// visitFreeInst - Free instructions are code gen'd to call the free libc
+/// function.
+///
+void ISel::visitFreeInst(FreeInst &I) {
+ std::vector<ValueRecord> Args;
+ Args.push_back(ValueRecord(getReg(I.getOperand(0)),
+ I.getOperand(0)->getType()));
+ MachineInstr *TheCall = BuildMI(X86::CALLpcrel32,
+ 1).addExternalSymbol("free", true);
+ doCall(ValueRecord(0, Type::VoidTy), TheCall, Args);
+}
+
/// createSimpleX86InstructionSelector - This pass converts an LLVM function
/// into a machine code representation is a very simple peep-hole fashion. The