#include "X86RegisterInfo.h"
#include "X86Subtarget.h"
#include "X86TargetMachine.h"
-#include "llvm/Instructions.h"
+#include "llvm/CallingConv.h"
#include "llvm/DerivedTypes.h"
+#include "llvm/Instructions.h"
+#include "llvm/Intrinsics.h"
#include "llvm/CodeGen/FastISel.h"
#include "llvm/CodeGen/MachineConstantPool.h"
+#include "llvm/CodeGen/MachineFrameInfo.h"
#include "llvm/CodeGen/MachineRegisterInfo.h"
+#include "llvm/Support/CallSite.h"
+#include "llvm/Support/GetElementPtrTypeIterator.h"
using namespace llvm;
/// Subtarget - Keep a pointer to the X86Subtarget around so that we can
/// make the right decision when generating code for different targets.
const X86Subtarget *Subtarget;
-
+
+ /// StackPtr - Register used as the stack pointer.
+ ///
+ unsigned StackPtr;
+
+ /// X86ScalarSSEf32, X86ScalarSSEf64 - Select between SSE or x87
+ /// floating point ops.
+ /// When SSE is available, use it for f32 operations.
+ /// When SSE2 is available, use it for f64 operations.
+ bool X86ScalarSSEf64;
+ bool X86ScalarSSEf32;
+
public:
explicit X86FastISel(MachineFunction &mf,
+ MachineModuleInfo *mmi,
DenseMap<const Value *, unsigned> &vm,
- DenseMap<const BasicBlock *, MachineBasicBlock *> &bm)
- : FastISel(mf, vm, bm) {
+ DenseMap<const BasicBlock *, MachineBasicBlock *> &bm,
+ DenseMap<const AllocaInst *, int> &am
+#ifndef NDEBUG
+ , SmallSet<Instruction*, 8> &cil
+#endif
+ )
+ : FastISel(mf, mmi, vm, bm, am
+#ifndef NDEBUG
+ , cil
+#endif
+ ) {
Subtarget = &TM.getSubtarget<X86Subtarget>();
+ StackPtr = Subtarget->is64Bit() ? X86::RSP : X86::ESP;
+ X86ScalarSSEf64 = Subtarget->hasSSE2();
+ X86ScalarSSEf32 = Subtarget->hasSSE1();
}
virtual bool TargetSelectInstruction(Instruction *I);
#include "X86GenFastISel.inc"
private:
- bool X86FastEmitLoad(MVT VT, unsigned Op0, Value *V, unsigned &RR);
+ bool X86FastEmitCompare(Value *LHS, Value *RHS, MVT VT);
+
+ bool X86FastEmitLoad(MVT VT, const X86AddressMode &AM, unsigned &RR);
+
+ bool X86FastEmitStore(MVT VT, Value *Val,
+ const X86AddressMode &AM);
+ bool X86FastEmitStore(MVT VT, unsigned Val,
+ const X86AddressMode &AM);
- bool X86FastEmitStore(MVT VT, unsigned Op0, unsigned Op1, Value *V);
+ bool X86FastEmitExtend(ISD::NodeType Opc, MVT DstVT, unsigned Src, MVT SrcVT,
+ unsigned &ResultReg);
- bool X86SelectConstAddr(Value *V, unsigned &Op0);
+ bool X86SelectAddress(Value *V, X86AddressMode &AM, bool isCall);
bool X86SelectLoad(Instruction *I);
bool X86SelectSelect(Instruction *I);
- unsigned TargetMaterializeConstant(Constant *C, MachineConstantPool* MCP);
+ bool X86SelectTrunc(Instruction *I);
+
+ bool X86SelectFPExt(Instruction *I);
+ bool X86SelectFPTrunc(Instruction *I);
+
+ bool X86SelectExtractValue(Instruction *I);
+
+ bool X86VisitIntrinsicCall(CallInst &I, unsigned Intrinsic);
+ bool X86SelectCall(Instruction *I);
+
+ CCAssignFn *CCAssignFnForCall(unsigned CC, bool isTailCall = false);
+
+ const X86InstrInfo *getInstrInfo() const {
+ return getTargetMachine()->getInstrInfo();
+ }
+ const X86TargetMachine *getTargetMachine() const {
+ return static_cast<const X86TargetMachine *>(&TM);
+ }
+
+ unsigned TargetMaterializeConstant(Constant *C);
+
+ unsigned TargetMaterializeAlloca(AllocaInst *C);
+
+ /// isScalarFPTypeInSSEReg - Return true if the specified scalar FP type is
+ /// computed in an SSE register, not on the X87 floating point stack.
+ bool isScalarFPTypeInSSEReg(MVT VT) const {
+ return (VT == MVT::f64 && X86ScalarSSEf64) || // f64 is when SSE2
+ (VT == MVT::f32 && X86ScalarSSEf32); // f32 is when SSE1
+ }
+
+ bool isTypeLegal(const Type *Ty, MVT &VT, bool AllowI1 = false);
};
+bool X86FastISel::isTypeLegal(const Type *Ty, MVT &VT, bool AllowI1) {
+ VT = TLI.getValueType(Ty, /*HandleUnknown=*/true);
+ if (VT == MVT::Other || !VT.isSimple())
+ // Unhandled type. Halt "fast" selection and bail.
+ return false;
+
+ // For now, require SSE/SSE2 for performing floating-point operations,
+ // since x87 requires additional work.
+ if (VT == MVT::f64 && !X86ScalarSSEf64)
+ return false;
+ if (VT == MVT::f32 && !X86ScalarSSEf32)
+ return false;
+ // Similarly, no f80 support yet.
+ if (VT == MVT::f80)
+ return false;
+ // We only handle legal types. For example, on x86-32 the instruction
+ // selector contains all of the 64-bit instructions from x86-64,
+ // under the assumption that i64 won't be used if the target doesn't
+ // support it.
+ return (AllowI1 && VT == MVT::i1) || TLI.isTypeLegal(VT);
+}
+
+#include "X86GenCallingConv.inc"
+
+/// CCAssignFnForCall - Selects the correct CCAssignFn for a given calling
+/// convention.
+CCAssignFn *X86FastISel::CCAssignFnForCall(unsigned CC, bool isTaillCall) {
+ if (Subtarget->is64Bit()) {
+ if (Subtarget->isTargetWin64())
+ return CC_X86_Win64_C;
+ else if (CC == CallingConv::Fast && isTaillCall)
+ return CC_X86_64_TailCall;
+ else
+ return CC_X86_64_C;
+ }
+
+ if (CC == CallingConv::X86_FastCall)
+ return CC_X86_32_FastCall;
+ else if (CC == CallingConv::Fast)
+ return CC_X86_32_FastCC;
+ else
+ return CC_X86_32_C;
+}
+
/// X86FastEmitLoad - Emit a machine instruction to load a value of type VT.
-/// The address is either pre-computed, i.e. Op0, or a GlobalAddress, i.e. V.
+/// The address is either pre-computed, i.e. Ptr, or a GlobalAddress, i.e. GV.
/// Return true and the result register by reference if it is possible.
-bool X86FastISel::X86FastEmitLoad(MVT VT, unsigned Op0, Value *V,
+bool X86FastISel::X86FastEmitLoad(MVT VT, const X86AddressMode &AM,
unsigned &ResultReg) {
// Get opcode and regclass of the output for the given load instruction.
unsigned Opc = 0;
}
break;
case MVT::f80:
- Opc = X86::LD_Fp80m;
- RC = X86::RFP80RegisterClass;
- break;
+ // No f80 support yet.
+ return false;
}
ResultReg = createResultReg(RC);
- X86AddressMode AM;
- if (Op0)
- // Address is in register.
- AM.Base.Reg = Op0;
- else
- AM.GV = cast<GlobalValue>(V);
addFullAddress(BuildMI(MBB, TII.get(Opc), ResultReg), AM);
return true;
}
-/// X86FastEmitStore - Emit a machine instruction to store a value Op0 of
-/// type VT. The address is either pre-computed, i.e. Op1, or a GlobalAddress,
+/// X86FastEmitStore - Emit a machine instruction to store a value Val of
+/// type VT. The address is either pre-computed, consisted of a base ptr, Ptr
+/// and a displacement offset, or a GlobalAddress,
/// i.e. V. Return true if it is possible.
bool
-X86FastISel::X86FastEmitStore(MVT VT, unsigned Op0, unsigned Op1, Value *V) {
- // Get opcode and regclass of the output for the given load instruction.
+X86FastISel::X86FastEmitStore(MVT VT, unsigned Val,
+ const X86AddressMode &AM) {
+ // Get opcode and regclass of the output for the given store instruction.
unsigned Opc = 0;
- const TargetRegisterClass *RC = NULL;
switch (VT.getSimpleVT()) {
+ case MVT::f80: // No f80 support yet.
default: return false;
- case MVT::i8:
- Opc = X86::MOV8mr;
- RC = X86::GR8RegisterClass;
+ case MVT::i8: Opc = X86::MOV8mr; break;
+ case MVT::i16: Opc = X86::MOV16mr; break;
+ case MVT::i32: Opc = X86::MOV32mr; break;
+ case MVT::i64: Opc = X86::MOV64mr; break; // Must be in x86-64 mode.
+ case MVT::f32:
+ Opc = Subtarget->hasSSE1() ? X86::MOVSSmr : X86::ST_Fp32m;
break;
- case MVT::i16:
- Opc = X86::MOV16mr;
- RC = X86::GR16RegisterClass;
+ case MVT::f64:
+ Opc = Subtarget->hasSSE2() ? X86::MOVSDmr : X86::ST_Fp64m;
break;
- case MVT::i32:
- Opc = X86::MOV32mr;
- RC = X86::GR32RegisterClass;
+ }
+
+ addFullAddress(BuildMI(MBB, TII.get(Opc)), AM).addReg(Val);
+ return true;
+}
+
+bool X86FastISel::X86FastEmitStore(MVT VT, Value *Val,
+ const X86AddressMode &AM) {
+ // Handle 'null' like i32/i64 0.
+ if (isa<ConstantPointerNull>(Val))
+ Val = Constant::getNullValue(TD.getIntPtrType());
+
+ // If this is a store of a simple constant, fold the constant into the store.
+ if (ConstantInt *CI = dyn_cast<ConstantInt>(Val)) {
+ unsigned Opc = 0;
+ switch (VT.getSimpleVT()) {
+ default: break;
+ case MVT::i8: Opc = X86::MOV8mi; break;
+ case MVT::i16: Opc = X86::MOV16mi; break;
+ case MVT::i32: Opc = X86::MOV32mi; break;
+ case MVT::i64:
+ // Must be a 32-bit sign extended value.
+ if ((int)CI->getSExtValue() == CI->getSExtValue())
+ Opc = X86::MOV64mi32;
+ break;
+ }
+
+ if (Opc) {
+ addFullAddress(BuildMI(MBB, TII.get(Opc)), AM).addImm(CI->getSExtValue());
+ return true;
+ }
+ }
+
+ unsigned ValReg = getRegForValue(Val);
+ if (ValReg == 0)
+ return false;
+
+ return X86FastEmitStore(VT, ValReg, AM);
+}
+
+/// X86FastEmitExtend - Emit a machine instruction to extend a value Src of
+/// type SrcVT to type DstVT using the specified extension opcode Opc (e.g.
+/// ISD::SIGN_EXTEND).
+bool X86FastISel::X86FastEmitExtend(ISD::NodeType Opc, MVT DstVT,
+ unsigned Src, MVT SrcVT,
+ unsigned &ResultReg) {
+ unsigned RR = FastEmit_r(SrcVT.getSimpleVT(), DstVT.getSimpleVT(), Opc, Src);
+
+ if (RR != 0) {
+ ResultReg = RR;
+ return true;
+ } else
+ return false;
+}
+
+/// X86SelectAddress - Attempt to fill in an address from the given value.
+///
+bool X86FastISel::X86SelectAddress(Value *V, X86AddressMode &AM, bool isCall) {
+ User *U;
+ unsigned Opcode = Instruction::UserOp1;
+ if (Instruction *I = dyn_cast<Instruction>(V)) {
+ Opcode = I->getOpcode();
+ U = I;
+ } else if (ConstantExpr *C = dyn_cast<ConstantExpr>(V)) {
+ Opcode = C->getOpcode();
+ U = C;
+ }
+
+ switch (Opcode) {
+ default: break;
+ case Instruction::BitCast:
+ // Look past bitcasts.
+ return X86SelectAddress(U->getOperand(0), AM, isCall);
+
+ case Instruction::IntToPtr:
+ // Look past no-op inttoptrs.
+ if (TLI.getValueType(U->getOperand(0)->getType()) == TLI.getPointerTy())
+ return X86SelectAddress(U->getOperand(0), AM, isCall);
break;
- case MVT::i64:
- // Must be in x86-64 mode.
- Opc = X86::MOV64mr;
- RC = X86::GR64RegisterClass;
+
+ case Instruction::PtrToInt:
+ // Look past no-op ptrtoints.
+ if (TLI.getValueType(U->getType()) == TLI.getPointerTy())
+ return X86SelectAddress(U->getOperand(0), AM, isCall);
break;
- case MVT::f32:
- if (Subtarget->hasSSE1()) {
- Opc = X86::MOVSSmr;
- RC = X86::FR32RegisterClass;
- } else {
- Opc = X86::ST_Fp32m;
- RC = X86::RFP32RegisterClass;
+
+ case Instruction::Alloca: {
+ if (isCall) break;
+ // Do static allocas.
+ const AllocaInst *A = cast<AllocaInst>(V);
+ DenseMap<const AllocaInst*, int>::iterator SI = StaticAllocaMap.find(A);
+ if (SI != StaticAllocaMap.end()) {
+ AM.BaseType = X86AddressMode::FrameIndexBase;
+ AM.Base.FrameIndex = SI->second;
+ return true;
}
break;
- case MVT::f64:
- if (Subtarget->hasSSE2()) {
- Opc = X86::MOVSDmr;
- RC = X86::FR64RegisterClass;
- } else {
- Opc = X86::ST_Fp64m;
- RC = X86::RFP64RegisterClass;
+ }
+
+ case Instruction::Add: {
+ if (isCall) break;
+ // Adds of constants are common and easy enough.
+ if (ConstantInt *CI = dyn_cast<ConstantInt>(U->getOperand(1))) {
+ uint64_t Disp = (int32_t)AM.Disp + (uint64_t)CI->getSExtValue();
+ // They have to fit in the 32-bit signed displacement field though.
+ if (isInt32(Disp)) {
+ AM.Disp = (uint32_t)Disp;
+ return X86SelectAddress(U->getOperand(0), AM, isCall);
+ }
}
break;
- case MVT::f80:
- Opc = X86::ST_FP80m;
- RC = X86::RFP80RegisterClass;
+ }
+
+ case Instruction::GetElementPtr: {
+ if (isCall) break;
+ // Pattern-match simple GEPs.
+ uint64_t Disp = (int32_t)AM.Disp;
+ unsigned IndexReg = AM.IndexReg;
+ unsigned Scale = AM.Scale;
+ gep_type_iterator GTI = gep_type_begin(U);
+ // Iterate through the indices, folding what we can. Constants can be
+ // folded, and one dynamic index can be handled, if the scale is supported.
+ for (User::op_iterator i = U->op_begin() + 1, e = U->op_end();
+ i != e; ++i, ++GTI) {
+ Value *Op = *i;
+ if (const StructType *STy = dyn_cast<StructType>(*GTI)) {
+ const StructLayout *SL = TD.getStructLayout(STy);
+ unsigned Idx = cast<ConstantInt>(Op)->getZExtValue();
+ Disp += SL->getElementOffset(Idx);
+ } else {
+ uint64_t S = TD.getABITypeSize(GTI.getIndexedType());
+ if (ConstantInt *CI = dyn_cast<ConstantInt>(Op)) {
+ // Constant-offset addressing.
+ Disp += CI->getSExtValue() * S;
+ } else if (IndexReg == 0 &&
+ (!AM.GV ||
+ !getTargetMachine()->symbolicAddressesAreRIPRel()) &&
+ (S == 1 || S == 2 || S == 4 || S == 8)) {
+ // Scaled-index addressing.
+ Scale = S;
+ IndexReg = getRegForGEPIndex(Op);
+ if (IndexReg == 0)
+ return false;
+ } else
+ // Unsupported.
+ goto unsupported_gep;
+ }
+ }
+ // Check for displacement overflow.
+ if (!isInt32(Disp))
+ break;
+ // Ok, the GEP indices were covered by constant-offset and scaled-index
+ // addressing. Update the address state and move on to examining the base.
+ AM.IndexReg = IndexReg;
+ AM.Scale = Scale;
+ AM.Disp = (uint32_t)Disp;
+ return X86SelectAddress(U->getOperand(0), AM, isCall);
+ unsupported_gep:
+ // Ok, the GEP indices weren't all covered.
break;
}
+ }
- X86AddressMode AM;
- if (Op1)
- // Address is in register.
- AM.Base.Reg = Op1;
- else
- AM.GV = cast<GlobalValue>(V);
- addFullAddress(BuildMI(MBB, TII.get(Opc)), AM).addReg(Op0);
- return true;
-}
+ // Handle constant address.
+ if (GlobalValue *GV = dyn_cast<GlobalValue>(V)) {
+ // Can't handle alternate code models yet.
+ if (TM.getCodeModel() != CodeModel::Default &&
+ TM.getCodeModel() != CodeModel::Small)
+ return false;
-/// X86SelectConstAddr - Select and emit code to materialize constant address.
-///
-bool X86FastISel::X86SelectConstAddr(Value *V,
- unsigned &Op0) {
- // FIXME: Only GlobalAddress for now.
- GlobalValue *GV = dyn_cast<GlobalValue>(V);
- if (!GV)
- return false;
+ // RIP-relative addresses can't have additional register operands.
+ if (getTargetMachine()->symbolicAddressesAreRIPRel() &&
+ (AM.Base.Reg != 0 || AM.IndexReg != 0))
+ return false;
- if (Subtarget->GVRequiresExtraLoad(GV, TM, false)) {
- // Issue load from stub if necessary.
- unsigned Opc = 0;
- const TargetRegisterClass *RC = NULL;
- if (TLI.getPointerTy() == MVT::i32) {
- Opc = X86::MOV32rm;
- RC = X86::GR32RegisterClass;
- } else {
- Opc = X86::MOV64rm;
- RC = X86::GR64RegisterClass;
- }
- Op0 = createResultReg(RC);
- X86AddressMode AM;
+ // Set up the basic address.
AM.GV = GV;
- addFullAddress(BuildMI(MBB, TII.get(Opc), Op0), AM);
- // Prevent loading GV stub multiple times in same MBB.
- LocalValueMap[V] = Op0;
+ if (!isCall &&
+ TM.getRelocationModel() == Reloc::PIC_ &&
+ !Subtarget->is64Bit())
+ AM.Base.Reg = getInstrInfo()->getGlobalBaseReg(&MF);
+
+ // Emit an extra load if the ABI requires it.
+ if (Subtarget->GVRequiresExtraLoad(GV, TM, isCall)) {
+ // Check to see if we've already materialized this
+ // value in a register in this block.
+ if (unsigned Reg = LocalValueMap[V]) {
+ AM.Base.Reg = Reg;
+ AM.GV = 0;
+ return true;
+ }
+ // Issue load from stub if necessary.
+ unsigned Opc = 0;
+ const TargetRegisterClass *RC = NULL;
+ if (TLI.getPointerTy() == MVT::i32) {
+ Opc = X86::MOV32rm;
+ RC = X86::GR32RegisterClass;
+ } else {
+ Opc = X86::MOV64rm;
+ RC = X86::GR64RegisterClass;
+ }
+
+ X86AddressMode StubAM;
+ StubAM.Base.Reg = AM.Base.Reg;
+ StubAM.GV = AM.GV;
+ unsigned ResultReg = createResultReg(RC);
+ addFullAddress(BuildMI(MBB, TII.get(Opc), ResultReg), StubAM);
+
+ // Now construct the final address. Note that the Disp, Scale,
+ // and Index values may already be set here.
+ AM.Base.Reg = ResultReg;
+ AM.GV = 0;
+
+ // Prevent loading GV stub multiple times in same MBB.
+ LocalValueMap[V] = AM.Base.Reg;
+ }
+ return true;
}
- return true;
+
+ // If all else fails, try to materialize the value in a register.
+ if (!AM.GV || !getTargetMachine()->symbolicAddressesAreRIPRel()) {
+ if (AM.Base.Reg == 0) {
+ AM.Base.Reg = getRegForValue(V);
+ return AM.Base.Reg != 0;
+ }
+ if (AM.IndexReg == 0) {
+ assert(AM.Scale == 1 && "Scale with no index!");
+ AM.IndexReg = getRegForValue(V);
+ return AM.IndexReg != 0;
+ }
+ }
+
+ return false;
}
/// X86SelectStore - Select and emit code to implement store instructions.
bool X86FastISel::X86SelectStore(Instruction* I) {
- MVT VT = MVT::getMVT(I->getOperand(0)->getType());
- if (VT == MVT::Other || !VT.isSimple())
- // Unhandled type. Halt "fast" selection and bail.
- return false;
- if (VT == MVT::iPTR)
- // Use pointer type.
- VT = TLI.getPointerTy();
- // We only handle legal types. For example, on x86-32 the instruction
- // selector contains all of the 64-bit instructions from x86-64,
- // under the assumption that i64 won't be used if the target doesn't
- // support it.
- if (!TLI.isTypeLegal(VT))
+ MVT VT;
+ if (!isTypeLegal(I->getOperand(0)->getType(), VT))
return false;
- unsigned Op0 = getRegForValue(I->getOperand(0));
- if (Op0 == 0)
- // Unhandled operand. Halt "fast" selection and bail.
- return false;
- Value *V = I->getOperand(1);
- unsigned Op1 = getRegForValue(V);
- if (Op1 == 0) {
- // Handle constant load address.
- if (!isa<Constant>(V) || !X86SelectConstAddr(V, Op1))
- // Unhandled operand. Halt "fast" selection and bail.
- return false;
- }
+ X86AddressMode AM;
+ if (!X86SelectAddress(I->getOperand(1), AM, false))
+ return false;
- return X86FastEmitStore(VT, Op0, Op1, V);
+ return X86FastEmitStore(VT, I->getOperand(0), AM);
}
/// X86SelectLoad - Select and emit code to implement load instructions.
///
bool X86FastISel::X86SelectLoad(Instruction *I) {
- MVT VT = MVT::getMVT(I->getType(), /*HandleUnknown=*/true);
- if (VT == MVT::Other || !VT.isSimple())
- // Unhandled type. Halt "fast" selection and bail.
- return false;
- if (VT == MVT::iPTR)
- // Use pointer type.
- VT = TLI.getPointerTy();
- // We only handle legal types. For example, on x86-32 the instruction
- // selector contains all of the 64-bit instructions from x86-64,
- // under the assumption that i64 won't be used if the target doesn't
- // support it.
- if (!TLI.isTypeLegal(VT))
+ MVT VT;
+ if (!isTypeLegal(I->getType(), VT))
return false;
- Value *V = I->getOperand(0);
- unsigned Op0 = getRegForValue(V);
- if (Op0 == 0) {
- // Handle constant load address.
- // FIXME: If load type is something we can't handle, this can result in
- // a dead stub load instruction.
- if (!isa<Constant>(V) || !X86SelectConstAddr(V, Op0))
- // Unhandled operand. Halt "fast" selection and bail.
- return false;
- }
+ X86AddressMode AM;
+ if (!X86SelectAddress(I->getOperand(0), AM, false))
+ return false;
unsigned ResultReg = 0;
- if (X86FastEmitLoad(VT, Op0, V, ResultReg)) {
+ if (X86FastEmitLoad(VT, AM, ResultReg)) {
UpdateValueMap(I, ResultReg);
return true;
}
return false;
}
-bool X86FastISel::X86SelectCmp(Instruction *I) {
- CmpInst *CI = cast<CmpInst>(I);
+static unsigned X86ChooseCmpOpcode(MVT VT) {
+ switch (VT.getSimpleVT()) {
+ default: return 0;
+ case MVT::i8: return X86::CMP8rr;
+ case MVT::i16: return X86::CMP16rr;
+ case MVT::i32: return X86::CMP32rr;
+ case MVT::i64: return X86::CMP64rr;
+ case MVT::f32: return X86::UCOMISSrr;
+ case MVT::f64: return X86::UCOMISDrr;
+ }
+}
- MVT VT = TLI.getValueType(I->getOperand(0)->getType());
- if (!TLI.isTypeLegal(VT))
- return false;
+/// X86ChooseCmpImmediateOpcode - If we have a comparison with RHS as the RHS
+/// of the comparison, return an opcode that works for the compare (e.g.
+/// CMP32ri) otherwise return 0.
+static unsigned X86ChooseCmpImmediateOpcode(MVT VT, ConstantInt *RHSC) {
+ switch (VT.getSimpleVT()) {
+ // Otherwise, we can't fold the immediate into this comparison.
+ default: return 0;
+ case MVT::i8: return X86::CMP8ri;
+ case MVT::i16: return X86::CMP16ri;
+ case MVT::i32: return X86::CMP32ri;
+ case MVT::i64:
+ // 64-bit comparisons are only valid if the immediate fits in a 32-bit sext
+ // field.
+ if ((int)RHSC->getSExtValue() == RHSC->getSExtValue())
+ return X86::CMP64ri32;
+ return 0;
+ }
+}
- unsigned Op0Reg = getRegForValue(CI->getOperand(0));
+bool X86FastISel::X86FastEmitCompare(Value *Op0, Value *Op1, MVT VT) {
+ unsigned Op0Reg = getRegForValue(Op0);
if (Op0Reg == 0) return false;
- unsigned Op1Reg = getRegForValue(CI->getOperand(1));
+
+ // Handle 'null' like i32/i64 0.
+ if (isa<ConstantPointerNull>(Op1))
+ Op1 = Constant::getNullValue(TD.getIntPtrType());
+
+ // We have two options: compare with register or immediate. If the RHS of
+ // the compare is an immediate that we can fold into this compare, use
+ // CMPri, otherwise use CMPrr.
+ if (ConstantInt *Op1C = dyn_cast<ConstantInt>(Op1)) {
+ if (unsigned CompareImmOpc = X86ChooseCmpImmediateOpcode(VT, Op1C)) {
+ BuildMI(MBB, TII.get(CompareImmOpc)).addReg(Op0Reg)
+ .addImm(Op1C->getSExtValue());
+ return true;
+ }
+ }
+
+ unsigned CompareOpc = X86ChooseCmpOpcode(VT);
+ if (CompareOpc == 0) return false;
+
+ unsigned Op1Reg = getRegForValue(Op1);
if (Op1Reg == 0) return false;
+ BuildMI(MBB, TII.get(CompareOpc)).addReg(Op0Reg).addReg(Op1Reg);
+
+ return true;
+}
- unsigned Opc;
- switch (VT.getSimpleVT()) {
- case MVT::i8: Opc = X86::CMP8rr; break;
- case MVT::i16: Opc = X86::CMP16rr; break;
- case MVT::i32: Opc = X86::CMP32rr; break;
- case MVT::i64: Opc = X86::CMP64rr; break;
- case MVT::f32: Opc = X86::UCOMISSrr; break;
- case MVT::f64: Opc = X86::UCOMISDrr; break;
- default: return false;
- }
+bool X86FastISel::X86SelectCmp(Instruction *I) {
+ CmpInst *CI = cast<CmpInst>(I);
+
+ MVT VT;
+ if (!isTypeLegal(I->getOperand(0)->getType(), VT))
+ return false;
unsigned ResultReg = createResultReg(&X86::GR8RegClass);
+ unsigned SetCCOpc;
+ bool SwapArgs; // false -> compare Op0, Op1. true -> compare Op1, Op0.
switch (CI->getPredicate()) {
case CmpInst::FCMP_OEQ: {
+ if (!X86FastEmitCompare(CI->getOperand(0), CI->getOperand(1), VT))
+ return false;
+
unsigned EReg = createResultReg(&X86::GR8RegClass);
unsigned NPReg = createResultReg(&X86::GR8RegClass);
- BuildMI(MBB, TII.get(Opc)).addReg(Op0Reg).addReg(Op1Reg);
BuildMI(MBB, TII.get(X86::SETEr), EReg);
BuildMI(MBB, TII.get(X86::SETNPr), NPReg);
BuildMI(MBB, TII.get(X86::AND8rr), ResultReg).addReg(NPReg).addReg(EReg);
- break;
+ UpdateValueMap(I, ResultReg);
+ return true;
}
case CmpInst::FCMP_UNE: {
+ if (!X86FastEmitCompare(CI->getOperand(0), CI->getOperand(1), VT))
+ return false;
+
unsigned NEReg = createResultReg(&X86::GR8RegClass);
unsigned PReg = createResultReg(&X86::GR8RegClass);
- BuildMI(MBB, TII.get(Opc)).addReg(Op0Reg).addReg(Op1Reg);
BuildMI(MBB, TII.get(X86::SETNEr), NEReg);
BuildMI(MBB, TII.get(X86::SETPr), PReg);
BuildMI(MBB, TII.get(X86::OR8rr), ResultReg).addReg(PReg).addReg(NEReg);
- break;
+ UpdateValueMap(I, ResultReg);
+ return true;
}
- case CmpInst::FCMP_OGT:
- BuildMI(MBB, TII.get(Opc)).addReg(Op0Reg).addReg(Op1Reg);
- BuildMI(MBB, TII.get(X86::SETAr), ResultReg);
- break;
- case CmpInst::FCMP_OGE:
- BuildMI(MBB, TII.get(Opc)).addReg(Op0Reg).addReg(Op1Reg);
- BuildMI(MBB, TII.get(X86::SETAEr), ResultReg);
- break;
- case CmpInst::FCMP_OLT:
- BuildMI(MBB, TII.get(Opc)).addReg(Op1Reg).addReg(Op0Reg);
- BuildMI(MBB, TII.get(X86::SETAr), ResultReg);
- break;
- case CmpInst::FCMP_OLE:
- BuildMI(MBB, TII.get(Opc)).addReg(Op1Reg).addReg(Op0Reg);
- BuildMI(MBB, TII.get(X86::SETAEr), ResultReg);
- break;
- case CmpInst::FCMP_ONE:
- BuildMI(MBB, TII.get(Opc)).addReg(Op0Reg).addReg(Op1Reg);
- BuildMI(MBB, TII.get(X86::SETNEr), ResultReg);
- break;
- case CmpInst::FCMP_ORD:
- BuildMI(MBB, TII.get(Opc)).addReg(Op0Reg).addReg(Op1Reg);
- BuildMI(MBB, TII.get(X86::SETNPr), ResultReg);
- break;
- case CmpInst::FCMP_UNO:
- BuildMI(MBB, TII.get(Opc)).addReg(Op0Reg).addReg(Op1Reg);
- BuildMI(MBB, TII.get(X86::SETPr), ResultReg);
- break;
- case CmpInst::FCMP_UEQ:
- BuildMI(MBB, TII.get(Opc)).addReg(Op0Reg).addReg(Op1Reg);
- BuildMI(MBB, TII.get(X86::SETEr), ResultReg);
- break;
- case CmpInst::FCMP_UGT:
- BuildMI(MBB, TII.get(Opc)).addReg(Op1Reg).addReg(Op0Reg);
- BuildMI(MBB, TII.get(X86::SETBr), ResultReg);
- break;
- case CmpInst::FCMP_UGE:
- BuildMI(MBB, TII.get(Opc)).addReg(Op1Reg).addReg(Op0Reg);
- BuildMI(MBB, TII.get(X86::SETBEr), ResultReg);
- break;
- case CmpInst::FCMP_ULT:
- BuildMI(MBB, TII.get(Opc)).addReg(Op0Reg).addReg(Op1Reg);
- BuildMI(MBB, TII.get(X86::SETBr), ResultReg);
- break;
- case CmpInst::FCMP_ULE:
- BuildMI(MBB, TII.get(Opc)).addReg(Op0Reg).addReg(Op1Reg);
- BuildMI(MBB, TII.get(X86::SETBEr), ResultReg);
- break;
- case CmpInst::ICMP_EQ:
- BuildMI(MBB, TII.get(Opc)).addReg(Op0Reg).addReg(Op1Reg);
- BuildMI(MBB, TII.get(X86::SETEr), ResultReg);
- break;
- case CmpInst::ICMP_NE:
- BuildMI(MBB, TII.get(Opc)).addReg(Op0Reg).addReg(Op1Reg);
- BuildMI(MBB, TII.get(X86::SETNEr), ResultReg);
- break;
- case CmpInst::ICMP_UGT:
- BuildMI(MBB, TII.get(Opc)).addReg(Op0Reg).addReg(Op1Reg);
- BuildMI(MBB, TII.get(X86::SETAr), ResultReg);
- break;
- case CmpInst::ICMP_UGE:
- BuildMI(MBB, TII.get(Opc)).addReg(Op0Reg).addReg(Op1Reg);
- BuildMI(MBB, TII.get(X86::SETAEr), ResultReg);
- break;
- case CmpInst::ICMP_ULT:
- BuildMI(MBB, TII.get(Opc)).addReg(Op0Reg).addReg(Op1Reg);
- BuildMI(MBB, TII.get(X86::SETBr), ResultReg);
- break;
- case CmpInst::ICMP_ULE:
- BuildMI(MBB, TII.get(Opc)).addReg(Op0Reg).addReg(Op1Reg);
- BuildMI(MBB, TII.get(X86::SETBEr), ResultReg);
- break;
- case CmpInst::ICMP_SGT:
- BuildMI(MBB, TII.get(Opc)).addReg(Op0Reg).addReg(Op1Reg);
- BuildMI(MBB, TII.get(X86::SETGr), ResultReg);
- break;
- case CmpInst::ICMP_SGE:
- BuildMI(MBB, TII.get(Opc)).addReg(Op0Reg).addReg(Op1Reg);
- BuildMI(MBB, TII.get(X86::SETGEr), ResultReg);
- break;
- case CmpInst::ICMP_SLT:
- BuildMI(MBB, TII.get(Opc)).addReg(Op0Reg).addReg(Op1Reg);
- BuildMI(MBB, TII.get(X86::SETLr), ResultReg);
- break;
- case CmpInst::ICMP_SLE:
- BuildMI(MBB, TII.get(Opc)).addReg(Op0Reg).addReg(Op1Reg);
- BuildMI(MBB, TII.get(X86::SETLEr), ResultReg);
- break;
+ case CmpInst::FCMP_OGT: SwapArgs = false; SetCCOpc = X86::SETAr; break;
+ case CmpInst::FCMP_OGE: SwapArgs = false; SetCCOpc = X86::SETAEr; break;
+ case CmpInst::FCMP_OLT: SwapArgs = true; SetCCOpc = X86::SETAr; break;
+ case CmpInst::FCMP_OLE: SwapArgs = true; SetCCOpc = X86::SETAEr; break;
+ case CmpInst::FCMP_ONE: SwapArgs = false; SetCCOpc = X86::SETNEr; break;
+ case CmpInst::FCMP_ORD: SwapArgs = false; SetCCOpc = X86::SETNPr; break;
+ case CmpInst::FCMP_UNO: SwapArgs = false; SetCCOpc = X86::SETPr; break;
+ case CmpInst::FCMP_UEQ: SwapArgs = false; SetCCOpc = X86::SETEr; break;
+ case CmpInst::FCMP_UGT: SwapArgs = true; SetCCOpc = X86::SETBr; break;
+ case CmpInst::FCMP_UGE: SwapArgs = true; SetCCOpc = X86::SETBEr; break;
+ case CmpInst::FCMP_ULT: SwapArgs = false; SetCCOpc = X86::SETBr; break;
+ case CmpInst::FCMP_ULE: SwapArgs = false; SetCCOpc = X86::SETBEr; break;
+
+ case CmpInst::ICMP_EQ: SwapArgs = false; SetCCOpc = X86::SETEr; break;
+ case CmpInst::ICMP_NE: SwapArgs = false; SetCCOpc = X86::SETNEr; break;
+ case CmpInst::ICMP_UGT: SwapArgs = false; SetCCOpc = X86::SETAr; break;
+ case CmpInst::ICMP_UGE: SwapArgs = false; SetCCOpc = X86::SETAEr; break;
+ case CmpInst::ICMP_ULT: SwapArgs = false; SetCCOpc = X86::SETBr; break;
+ case CmpInst::ICMP_ULE: SwapArgs = false; SetCCOpc = X86::SETBEr; break;
+ case CmpInst::ICMP_SGT: SwapArgs = false; SetCCOpc = X86::SETGr; break;
+ case CmpInst::ICMP_SGE: SwapArgs = false; SetCCOpc = X86::SETGEr; break;
+ case CmpInst::ICMP_SLT: SwapArgs = false; SetCCOpc = X86::SETLr; break;
+ case CmpInst::ICMP_SLE: SwapArgs = false; SetCCOpc = X86::SETLEr; break;
default:
return false;
}
+ Value *Op0 = CI->getOperand(0), *Op1 = CI->getOperand(1);
+ if (SwapArgs)
+ std::swap(Op0, Op1);
+
+ // Emit a compare of Op0/Op1.
+ if (!X86FastEmitCompare(Op0, Op1, VT))
+ return false;
+
+ BuildMI(MBB, TII.get(SetCCOpc), ResultReg);
UpdateValueMap(I, ResultReg);
return true;
}
return false;
}
+
bool X86FastISel::X86SelectBranch(Instruction *I) {
- BranchInst *BI = cast<BranchInst>(I);
// Unconditional branches are selected by tablegen-generated code.
- unsigned OpReg = getRegForValue(BI->getCondition());
- if (OpReg == 0) return false;
+ // Handle a conditional branch.
+ BranchInst *BI = cast<BranchInst>(I);
MachineBasicBlock *TrueMBB = MBBMap[BI->getSuccessor(0)];
MachineBasicBlock *FalseMBB = MBBMap[BI->getSuccessor(1)];
+ // Fold the common case of a conditional branch with a comparison.
+ if (CmpInst *CI = dyn_cast<CmpInst>(BI->getCondition())) {
+ if (CI->hasOneUse()) {
+ MVT VT = TLI.getValueType(CI->getOperand(0)->getType());
+
+ // Try to take advantage of fallthrough opportunities.
+ CmpInst::Predicate Predicate = CI->getPredicate();
+ if (MBB->isLayoutSuccessor(TrueMBB)) {
+ std::swap(TrueMBB, FalseMBB);
+ Predicate = CmpInst::getInversePredicate(Predicate);
+ }
+
+ bool SwapArgs; // false -> compare Op0, Op1. true -> compare Op1, Op0.
+ unsigned BranchOpc; // Opcode to jump on, e.g. "X86::JA"
+
+ switch (Predicate) {
+ case CmpInst::FCMP_OEQ:
+ std::swap(TrueMBB, FalseMBB);
+ Predicate = CmpInst::FCMP_UNE;
+ // FALL THROUGH
+ case CmpInst::FCMP_UNE: SwapArgs = false; BranchOpc = X86::JNE; break;
+ case CmpInst::FCMP_OGT: SwapArgs = false; BranchOpc = X86::JA; break;
+ case CmpInst::FCMP_OGE: SwapArgs = false; BranchOpc = X86::JAE; break;
+ case CmpInst::FCMP_OLT: SwapArgs = true; BranchOpc = X86::JA; break;
+ case CmpInst::FCMP_OLE: SwapArgs = true; BranchOpc = X86::JAE; break;
+ case CmpInst::FCMP_ONE: SwapArgs = false; BranchOpc = X86::JNE; break;
+ case CmpInst::FCMP_ORD: SwapArgs = false; BranchOpc = X86::JNP; break;
+ case CmpInst::FCMP_UNO: SwapArgs = false; BranchOpc = X86::JP; break;
+ case CmpInst::FCMP_UEQ: SwapArgs = false; BranchOpc = X86::JE; break;
+ case CmpInst::FCMP_UGT: SwapArgs = true; BranchOpc = X86::JB; break;
+ case CmpInst::FCMP_UGE: SwapArgs = true; BranchOpc = X86::JBE; break;
+ case CmpInst::FCMP_ULT: SwapArgs = false; BranchOpc = X86::JB; break;
+ case CmpInst::FCMP_ULE: SwapArgs = false; BranchOpc = X86::JBE; break;
+
+ case CmpInst::ICMP_EQ: SwapArgs = false; BranchOpc = X86::JE; break;
+ case CmpInst::ICMP_NE: SwapArgs = false; BranchOpc = X86::JNE; break;
+ case CmpInst::ICMP_UGT: SwapArgs = false; BranchOpc = X86::JA; break;
+ case CmpInst::ICMP_UGE: SwapArgs = false; BranchOpc = X86::JAE; break;
+ case CmpInst::ICMP_ULT: SwapArgs = false; BranchOpc = X86::JB; break;
+ case CmpInst::ICMP_ULE: SwapArgs = false; BranchOpc = X86::JBE; break;
+ case CmpInst::ICMP_SGT: SwapArgs = false; BranchOpc = X86::JG; break;
+ case CmpInst::ICMP_SGE: SwapArgs = false; BranchOpc = X86::JGE; break;
+ case CmpInst::ICMP_SLT: SwapArgs = false; BranchOpc = X86::JL; break;
+ case CmpInst::ICMP_SLE: SwapArgs = false; BranchOpc = X86::JLE; break;
+ default:
+ return false;
+ }
+
+ Value *Op0 = CI->getOperand(0), *Op1 = CI->getOperand(1);
+ if (SwapArgs)
+ std::swap(Op0, Op1);
+
+ // Emit a compare of the LHS and RHS, setting the flags.
+ if (!X86FastEmitCompare(Op0, Op1, VT))
+ return false;
+
+ BuildMI(MBB, TII.get(BranchOpc)).addMBB(TrueMBB);
+
+ if (Predicate == CmpInst::FCMP_UNE) {
+ // X86 requires a second branch to handle UNE (and OEQ,
+ // which is mapped to UNE above).
+ BuildMI(MBB, TII.get(X86::JP)).addMBB(TrueMBB);
+ }
+
+ FastEmitBranch(FalseMBB);
+ MBB->addSuccessor(TrueMBB);
+ return true;
+ }
+ } else if (ExtractValueInst *EI =
+ dyn_cast<ExtractValueInst>(BI->getCondition())) {
+ // Check to see if the branch instruction is from an "arithmetic with
+ // overflow" intrinsic. The main way these intrinsics are used is:
+ //
+ // %t = call { i32, i1 } @llvm.sadd.with.overflow.i32(i32 %v1, i32 %v2)
+ // %sum = extractvalue { i32, i1 } %t, 0
+ // %obit = extractvalue { i32, i1 } %t, 1
+ // br i1 %obit, label %overflow, label %normal
+ //
+ // The %sum and %obit are converted in an ADD and a SETO/SETC before
+ // reaching the branch. Therefore, we search backwards through the MBB
+ // looking for the SETO/SETC instruction. If an instruction modifies the
+ // EFLAGS register before we reach the SETO/SETC instruction, then we can't
+ // convert the branch into a JO/JC instruction.
+
+ Value *Agg = EI->getAggregateOperand();
+
+ if (CallInst *CI = dyn_cast<CallInst>(Agg)) {
+ Function *F = CI->getCalledFunction();
+
+ if (F && F->isDeclaration()) {
+ switch (F->getIntrinsicID()) {
+ default: break;
+ case Intrinsic::sadd_with_overflow:
+ case Intrinsic::uadd_with_overflow: {
+ const MachineInstr *SetMI = 0;
+ unsigned Reg = lookUpRegForValue(EI);
+
+ for (MachineBasicBlock::const_reverse_iterator
+ RI = MBB->rbegin(), RE = MBB->rend(); RI != RE; ++RI) {
+ const MachineInstr &MI = *RI;
+
+ if (MI.modifiesRegister(Reg)) {
+ unsigned Src, Dst;
+
+ if (getInstrInfo()->isMoveInstr(MI, Src, Dst)) {
+ Reg = Src;
+ continue;
+ }
+
+ SetMI = &MI;
+ break;
+ }
+
+ const TargetInstrDesc &TID = MI.getDesc();
+ const unsigned *ImpDefs = TID.getImplicitDefs();
+
+ if (TID.hasUnmodeledSideEffects()) break;
+
+ bool ModifiesEFlags = false;
+
+ if (ImpDefs) {
+ for (unsigned u = 0; ImpDefs[u]; ++u)
+ if (ImpDefs[u] == X86::EFLAGS) {
+ ModifiesEFlags = true;
+ break;
+ }
+ }
+
+ if (ModifiesEFlags) break;
+ }
+
+ if (SetMI) {
+ unsigned OpCode = SetMI->getOpcode();
+
+ if (OpCode == X86::SETOr || OpCode == X86::SETCr) {
+ BuildMI(MBB, TII.get((OpCode == X86::SETOr) ?
+ X86::JO : X86::JC)).addMBB(TrueMBB);
+ FastEmitBranch(FalseMBB);
+ MBB->addSuccessor(TrueMBB);
+ return true;
+ }
+ }
+ }
+ }
+ }
+ }
+ }
+
+ // Otherwise do a clumsy setcc and re-test it.
+ unsigned OpReg = getRegForValue(BI->getCondition());
+ if (OpReg == 0) return false;
+
BuildMI(MBB, TII.get(X86::TEST8rr)).addReg(OpReg).addReg(OpReg);
BuildMI(MBB, TII.get(X86::JNE)).addMBB(TrueMBB);
- BuildMI(MBB, TII.get(X86::JMP)).addMBB(FalseMBB);
-
+ FastEmitBranch(FalseMBB);
MBB->addSuccessor(TrueMBB);
- MBB->addSuccessor(FalseMBB);
-
return true;
}
bool X86FastISel::X86SelectShift(Instruction *I) {
- unsigned CReg = 0;
- unsigned Opc = 0;
+ unsigned CReg = 0, OpReg = 0, OpImm = 0;
const TargetRegisterClass *RC = NULL;
if (I->getType() == Type::Int8Ty) {
CReg = X86::CL;
RC = &X86::GR8RegClass;
switch (I->getOpcode()) {
- case Instruction::LShr: Opc = X86::SHR8rCL; break;
- case Instruction::AShr: Opc = X86::SAR8rCL; break;
- case Instruction::Shl: Opc = X86::SHL8rCL; break;
+ case Instruction::LShr: OpReg = X86::SHR8rCL; OpImm = X86::SHR8ri; break;
+ case Instruction::AShr: OpReg = X86::SAR8rCL; OpImm = X86::SAR8ri; break;
+ case Instruction::Shl: OpReg = X86::SHL8rCL; OpImm = X86::SHL8ri; break;
default: return false;
}
} else if (I->getType() == Type::Int16Ty) {
CReg = X86::CX;
RC = &X86::GR16RegClass;
switch (I->getOpcode()) {
- case Instruction::LShr: Opc = X86::SHR16rCL; break;
- case Instruction::AShr: Opc = X86::SAR16rCL; break;
- case Instruction::Shl: Opc = X86::SHL16rCL; break;
+ case Instruction::LShr: OpReg = X86::SHR16rCL; OpImm = X86::SHR16ri; break;
+ case Instruction::AShr: OpReg = X86::SAR16rCL; OpImm = X86::SAR16ri; break;
+ case Instruction::Shl: OpReg = X86::SHL16rCL; OpImm = X86::SHL16ri; break;
default: return false;
}
} else if (I->getType() == Type::Int32Ty) {
CReg = X86::ECX;
RC = &X86::GR32RegClass;
switch (I->getOpcode()) {
- case Instruction::LShr: Opc = X86::SHR32rCL; break;
- case Instruction::AShr: Opc = X86::SAR32rCL; break;
- case Instruction::Shl: Opc = X86::SHL32rCL; break;
+ case Instruction::LShr: OpReg = X86::SHR32rCL; OpImm = X86::SHR32ri; break;
+ case Instruction::AShr: OpReg = X86::SAR32rCL; OpImm = X86::SAR32ri; break;
+ case Instruction::Shl: OpReg = X86::SHL32rCL; OpImm = X86::SHL32ri; break;
default: return false;
}
} else if (I->getType() == Type::Int64Ty) {
CReg = X86::RCX;
RC = &X86::GR64RegClass;
switch (I->getOpcode()) {
- case Instruction::LShr: Opc = X86::SHR64rCL; break;
- case Instruction::AShr: Opc = X86::SAR64rCL; break;
- case Instruction::Shl: Opc = X86::SHL64rCL; break;
+ case Instruction::LShr: OpReg = X86::SHR64rCL; OpImm = X86::SHR64ri; break;
+ case Instruction::AShr: OpReg = X86::SAR64rCL; OpImm = X86::SAR64ri; break;
+ case Instruction::Shl: OpReg = X86::SHL64rCL; OpImm = X86::SHL64ri; break;
default: return false;
}
} else {
return false;
}
+ MVT VT = TLI.getValueType(I->getType(), /*HandleUnknown=*/true);
+ if (VT == MVT::Other || !isTypeLegal(I->getType(), VT))
+ return false;
+
unsigned Op0Reg = getRegForValue(I->getOperand(0));
if (Op0Reg == 0) return false;
+
+ // Fold immediate in shl(x,3).
+ if (ConstantInt *CI = dyn_cast<ConstantInt>(I->getOperand(1))) {
+ unsigned ResultReg = createResultReg(RC);
+ BuildMI(MBB, TII.get(OpImm),
+ ResultReg).addReg(Op0Reg).addImm(CI->getZExtValue() & 0xff);
+ UpdateValueMap(I, ResultReg);
+ return true;
+ }
+
unsigned Op1Reg = getRegForValue(I->getOperand(1));
if (Op1Reg == 0) return false;
TII.copyRegToReg(*MBB, MBB->end(), CReg, Op1Reg, RC, RC);
+
+ // The shift instruction uses X86::CL. If we defined a super-register
+ // of X86::CL, emit an EXTRACT_SUBREG to precisely describe what
+ // we're doing here.
+ if (CReg != X86::CL)
+ BuildMI(MBB, TII.get(TargetInstrInfo::EXTRACT_SUBREG), X86::CL)
+ .addReg(CReg).addImm(X86::SUBREG_8BIT);
+
unsigned ResultReg = createResultReg(RC);
- BuildMI(MBB, TII.get(Opc), ResultReg).addReg(Op0Reg);
+ BuildMI(MBB, TII.get(OpReg), ResultReg).addReg(Op0Reg);
UpdateValueMap(I, ResultReg);
return true;
}
bool X86FastISel::X86SelectSelect(Instruction *I) {
- const Type *Ty = I->getOperand(1)->getType();
- if (isa<PointerType>(Ty))
- Ty = TLI.getTargetData()->getIntPtrType();
-
+ MVT VT = TLI.getValueType(I->getType(), /*HandleUnknown=*/true);
+ if (VT == MVT::Other || !isTypeLegal(I->getType(), VT))
+ return false;
+
unsigned Opc = 0;
const TargetRegisterClass *RC = NULL;
- if (Ty == Type::Int16Ty) {
+ if (VT.getSimpleVT() == MVT::i16) {
Opc = X86::CMOVE16rr;
RC = &X86::GR16RegClass;
- } else if (Ty == Type::Int32Ty) {
+ } else if (VT.getSimpleVT() == MVT::i32) {
Opc = X86::CMOVE32rr;
RC = &X86::GR32RegClass;
- } else if (Ty == Type::Int64Ty) {
+ } else if (VT.getSimpleVT() == MVT::i64) {
Opc = X86::CMOVE64rr;
RC = &X86::GR64RegClass;
} else {
return true;
}
+bool X86FastISel::X86SelectFPExt(Instruction *I) {
+ // fpext from float to double.
+ if (Subtarget->hasSSE2() && I->getType() == Type::DoubleTy) {
+ Value *V = I->getOperand(0);
+ if (V->getType() == Type::FloatTy) {
+ unsigned OpReg = getRegForValue(V);
+ if (OpReg == 0) return false;
+ unsigned ResultReg = createResultReg(X86::FR64RegisterClass);
+ BuildMI(MBB, TII.get(X86::CVTSS2SDrr), ResultReg).addReg(OpReg);
+ UpdateValueMap(I, ResultReg);
+ return true;
+ }
+ }
+
+ return false;
+}
+
+bool X86FastISel::X86SelectFPTrunc(Instruction *I) {
+ if (Subtarget->hasSSE2()) {
+ if (I->getType() == Type::FloatTy) {
+ Value *V = I->getOperand(0);
+ if (V->getType() == Type::DoubleTy) {
+ unsigned OpReg = getRegForValue(V);
+ if (OpReg == 0) return false;
+ unsigned ResultReg = createResultReg(X86::FR32RegisterClass);
+ BuildMI(MBB, TII.get(X86::CVTSD2SSrr), ResultReg).addReg(OpReg);
+ UpdateValueMap(I, ResultReg);
+ return true;
+ }
+ }
+ }
+
+ return false;
+}
+
+bool X86FastISel::X86SelectTrunc(Instruction *I) {
+ if (Subtarget->is64Bit())
+ // All other cases should be handled by the tblgen generated code.
+ return false;
+ MVT SrcVT = TLI.getValueType(I->getOperand(0)->getType());
+ MVT DstVT = TLI.getValueType(I->getType());
+ if (DstVT != MVT::i8)
+ // All other cases should be handled by the tblgen generated code.
+ return false;
+ if (SrcVT != MVT::i16 && SrcVT != MVT::i32)
+ // All other cases should be handled by the tblgen generated code.
+ return false;
+
+ unsigned InputReg = getRegForValue(I->getOperand(0));
+ if (!InputReg)
+ // Unhandled operand. Halt "fast" selection and bail.
+ return false;
+
+ // First issue a copy to GR16_ or GR32_.
+ unsigned CopyOpc = (SrcVT == MVT::i16) ? X86::MOV16to16_ : X86::MOV32to32_;
+ const TargetRegisterClass *CopyRC = (SrcVT == MVT::i16)
+ ? X86::GR16_RegisterClass : X86::GR32_RegisterClass;
+ unsigned CopyReg = createResultReg(CopyRC);
+ BuildMI(MBB, TII.get(CopyOpc), CopyReg).addReg(InputReg);
+
+ // Then issue an extract_subreg.
+ unsigned ResultReg = FastEmitInst_extractsubreg(CopyReg, X86::SUBREG_8BIT);
+ if (!ResultReg)
+ return false;
+
+ UpdateValueMap(I, ResultReg);
+ return true;
+}
+
+bool X86FastISel::X86SelectExtractValue(Instruction *I) {
+ ExtractValueInst *EI = cast<ExtractValueInst>(I);
+ Value *Agg = EI->getAggregateOperand();
+
+ if (CallInst *CI = dyn_cast<CallInst>(Agg)) {
+ Function *F = CI->getCalledFunction();
+
+ if (F && F->isDeclaration()) {
+ switch (F->getIntrinsicID()) {
+ default: break;
+ case Intrinsic::sadd_with_overflow:
+ case Intrinsic::uadd_with_overflow:
+ // Cheat a little. We know that the registers for "add" and "seto" are
+ // allocated sequentially. However, we only keep track of the register
+ // for "add" in the value map. Use extractvalue's index to get the
+ // correct register for "seto".
+ UpdateValueMap(I, lookUpRegForValue(Agg) + *EI->idx_begin());
+ return true;
+ }
+ }
+ }
+
+ return false;
+}
+
+bool X86FastISel::X86VisitIntrinsicCall(CallInst &I, unsigned Intrinsic) {
+ // FIXME: Handle more intrinsics.
+ switch (Intrinsic) {
+ default: return false;
+ case Intrinsic::sadd_with_overflow:
+ case Intrinsic::uadd_with_overflow: {
+ // Replace "add with overflow" intrinsics with an "add" instruction followed
+ // by a seto/setc instruction. Later on, when the "extractvalue"
+ // instructions are encountered, we use the fact that two registers were
+ // created sequentially to get the correct registers for the "sum" and the
+ // "overflow bit".
+ MVT VT;
+ const Function *Callee = I.getCalledFunction();
+ const Type *RetTy =
+ cast<StructType>(Callee->getReturnType())->getTypeAtIndex(unsigned(0));
+
+ if (!isTypeLegal(RetTy, VT))
+ return false;
+
+ Value *Op1 = I.getOperand(1);
+ Value *Op2 = I.getOperand(2);
+ unsigned Reg1 = getRegForValue(Op1);
+ unsigned Reg2 = getRegForValue(Op2);
+
+ if (Reg1 == 0 || Reg2 == 0)
+ // FIXME: Handle values *not* in registers.
+ return false;
+
+ unsigned OpC = 0;
+
+ if (VT == MVT::i32)
+ OpC = X86::ADD32rr;
+ else if (VT == MVT::i64)
+ OpC = X86::ADD64rr;
+ else
+ return false;
+
+ unsigned ResultReg = createResultReg(TLI.getRegClassFor(VT));
+ BuildMI(MBB, TII.get(OpC), ResultReg).addReg(Reg1).addReg(Reg2);
+ UpdateValueMap(&I, ResultReg);
+
+ ResultReg = createResultReg(TLI.getRegClassFor(MVT::i8));
+ BuildMI(MBB, TII.get((Intrinsic == Intrinsic::sadd_with_overflow) ?
+ X86::SETOr : X86::SETCr), ResultReg);
+ return true;
+ }
+ }
+}
+
+bool X86FastISel::X86SelectCall(Instruction *I) {
+ CallInst *CI = cast<CallInst>(I);
+ Value *Callee = I->getOperand(0);
+
+ // Can't handle inline asm yet.
+ if (isa<InlineAsm>(Callee))
+ return false;
+
+ // Handle intrinsic calls.
+ if (Function *F = CI->getCalledFunction())
+ if (F->isDeclaration())
+ if (unsigned IID = F->getIntrinsicID())
+ return X86VisitIntrinsicCall(*CI, IID);
+
+ // Handle only C and fastcc calling conventions for now.
+ CallSite CS(CI);
+ unsigned CC = CS.getCallingConv();
+ if (CC != CallingConv::C &&
+ CC != CallingConv::Fast &&
+ CC != CallingConv::X86_FastCall)
+ return false;
+
+ // Let SDISel handle vararg functions.
+ const PointerType *PT = cast<PointerType>(CS.getCalledValue()->getType());
+ const FunctionType *FTy = cast<FunctionType>(PT->getElementType());
+ if (FTy->isVarArg())
+ return false;
+
+ // Handle *simple* calls for now.
+ const Type *RetTy = CS.getType();
+ MVT RetVT;
+ if (RetTy == Type::VoidTy)
+ RetVT = MVT::isVoid;
+ else if (!isTypeLegal(RetTy, RetVT, true))
+ return false;
+
+ // Materialize callee address in a register. FIXME: GV address can be
+ // handled with a CALLpcrel32 instead.
+ X86AddressMode CalleeAM;
+ if (!X86SelectAddress(Callee, CalleeAM, true))
+ return false;
+ unsigned CalleeOp = 0;
+ GlobalValue *GV = 0;
+ if (CalleeAM.Base.Reg != 0) {
+ assert(CalleeAM.GV == 0);
+ CalleeOp = CalleeAM.Base.Reg;
+ } else if (CalleeAM.GV != 0) {
+ assert(CalleeAM.GV != 0);
+ GV = CalleeAM.GV;
+ } else
+ return false;
+
+ // Allow calls which produce i1 results.
+ bool AndToI1 = false;
+ if (RetVT == MVT::i1) {
+ RetVT = MVT::i8;
+ AndToI1 = true;
+ }
+
+ // Deal with call operands first.
+ SmallVector<Value*, 8> ArgVals;
+ SmallVector<unsigned, 8> Args;
+ SmallVector<MVT, 8> ArgVTs;
+ SmallVector<ISD::ArgFlagsTy, 8> ArgFlags;
+ Args.reserve(CS.arg_size());
+ ArgVals.reserve(CS.arg_size());
+ ArgVTs.reserve(CS.arg_size());
+ ArgFlags.reserve(CS.arg_size());
+ for (CallSite::arg_iterator i = CS.arg_begin(), e = CS.arg_end();
+ i != e; ++i) {
+ unsigned Arg = getRegForValue(*i);
+ if (Arg == 0)
+ return false;
+ ISD::ArgFlagsTy Flags;
+ unsigned AttrInd = i - CS.arg_begin() + 1;
+ if (CS.paramHasAttr(AttrInd, Attribute::SExt))
+ Flags.setSExt();
+ if (CS.paramHasAttr(AttrInd, Attribute::ZExt))
+ Flags.setZExt();
+
+ // FIXME: Only handle *easy* calls for now.
+ if (CS.paramHasAttr(AttrInd, Attribute::InReg) ||
+ CS.paramHasAttr(AttrInd, Attribute::StructRet) ||
+ CS.paramHasAttr(AttrInd, Attribute::Nest) ||
+ CS.paramHasAttr(AttrInd, Attribute::ByVal))
+ return false;
+
+ const Type *ArgTy = (*i)->getType();
+ MVT ArgVT;
+ if (!isTypeLegal(ArgTy, ArgVT))
+ return false;
+ unsigned OriginalAlignment = TD.getABITypeAlignment(ArgTy);
+ Flags.setOrigAlign(OriginalAlignment);
+
+ Args.push_back(Arg);
+ ArgVals.push_back(*i);
+ ArgVTs.push_back(ArgVT);
+ ArgFlags.push_back(Flags);
+ }
+
+ // Analyze operands of the call, assigning locations to each operand.
+ SmallVector<CCValAssign, 16> ArgLocs;
+ CCState CCInfo(CC, false, TM, ArgLocs);
+ CCInfo.AnalyzeCallOperands(ArgVTs, ArgFlags, CCAssignFnForCall(CC));
+
+ // Get a count of how many bytes are to be pushed on the stack.
+ unsigned NumBytes = CCInfo.getNextStackOffset();
+
+ // Issue CALLSEQ_START
+ unsigned AdjStackDown = TM.getRegisterInfo()->getCallFrameSetupOpcode();
+ BuildMI(MBB, TII.get(AdjStackDown)).addImm(NumBytes);
+
+ // Process argument: walk the register/memloc assignments, inserting
+ // copies / loads.
+ SmallVector<unsigned, 4> RegArgs;
+ for (unsigned i = 0, e = ArgLocs.size(); i != e; ++i) {
+ CCValAssign &VA = ArgLocs[i];
+ unsigned Arg = Args[VA.getValNo()];
+ MVT ArgVT = ArgVTs[VA.getValNo()];
+
+ // Promote the value if needed.
+ switch (VA.getLocInfo()) {
+ default: assert(0 && "Unknown loc info!");
+ case CCValAssign::Full: break;
+ case CCValAssign::SExt: {
+ bool Emitted = X86FastEmitExtend(ISD::SIGN_EXTEND, VA.getLocVT(),
+ Arg, ArgVT, Arg);
+ assert(Emitted && "Failed to emit a sext!"); Emitted=Emitted;
+ Emitted = true;
+ ArgVT = VA.getLocVT();
+ break;
+ }
+ case CCValAssign::ZExt: {
+ bool Emitted = X86FastEmitExtend(ISD::ZERO_EXTEND, VA.getLocVT(),
+ Arg, ArgVT, Arg);
+ assert(Emitted && "Failed to emit a zext!"); Emitted=Emitted;
+ Emitted = true;
+ ArgVT = VA.getLocVT();
+ break;
+ }
+ case CCValAssign::AExt: {
+ bool Emitted = X86FastEmitExtend(ISD::ANY_EXTEND, VA.getLocVT(),
+ Arg, ArgVT, Arg);
+ if (!Emitted)
+ Emitted = X86FastEmitExtend(ISD::ZERO_EXTEND, VA.getLocVT(),
+ Arg, ArgVT, Arg);
+ if (!Emitted)
+ Emitted = X86FastEmitExtend(ISD::SIGN_EXTEND, VA.getLocVT(),
+ Arg, ArgVT, Arg);
+
+ assert(Emitted && "Failed to emit a aext!"); Emitted=Emitted;
+ ArgVT = VA.getLocVT();
+ break;
+ }
+ }
+
+ if (VA.isRegLoc()) {
+ TargetRegisterClass* RC = TLI.getRegClassFor(ArgVT);
+ bool Emitted = TII.copyRegToReg(*MBB, MBB->end(), VA.getLocReg(),
+ Arg, RC, RC);
+ assert(Emitted && "Failed to emit a copy instruction!"); Emitted=Emitted;
+ Emitted = true;
+ RegArgs.push_back(VA.getLocReg());
+ } else {
+ unsigned LocMemOffset = VA.getLocMemOffset();
+ X86AddressMode AM;
+ AM.Base.Reg = StackPtr;
+ AM.Disp = LocMemOffset;
+ Value *ArgVal = ArgVals[VA.getValNo()];
+
+ // If this is a really simple value, emit this with the Value* version of
+ // X86FastEmitStore. If it isn't simple, we don't want to do this, as it
+ // can cause us to reevaluate the argument.
+ if (isa<ConstantInt>(ArgVal) || isa<ConstantPointerNull>(ArgVal))
+ X86FastEmitStore(ArgVT, ArgVal, AM);
+ else
+ X86FastEmitStore(ArgVT, Arg, AM);
+ }
+ }
+
+ // ELF / PIC requires GOT in the EBX register before function calls via PLT
+ // GOT pointer.
+ if (!Subtarget->is64Bit() &&
+ TM.getRelocationModel() == Reloc::PIC_ &&
+ Subtarget->isPICStyleGOT()) {
+ TargetRegisterClass *RC = X86::GR32RegisterClass;
+ unsigned Base = getInstrInfo()->getGlobalBaseReg(&MF);
+ bool Emitted = TII.copyRegToReg(*MBB, MBB->end(), X86::EBX, Base, RC, RC);
+ assert(Emitted && "Failed to emit a copy instruction!"); Emitted=Emitted;
+ Emitted = true;
+ }
+
+ // Issue the call.
+ unsigned CallOpc = CalleeOp
+ ? (Subtarget->is64Bit() ? X86::CALL64r : X86::CALL32r)
+ : (Subtarget->is64Bit() ? X86::CALL64pcrel32 : X86::CALLpcrel32);
+ MachineInstrBuilder MIB = CalleeOp
+ ? BuildMI(MBB, TII.get(CallOpc)).addReg(CalleeOp)
+ : BuildMI(MBB, TII.get(CallOpc)).addGlobalAddress(GV);
+
+ // Add an implicit use GOT pointer in EBX.
+ if (!Subtarget->is64Bit() &&
+ TM.getRelocationModel() == Reloc::PIC_ &&
+ Subtarget->isPICStyleGOT())
+ MIB.addReg(X86::EBX);
+
+ // Add implicit physical register uses to the call.
+ for (unsigned i = 0, e = RegArgs.size(); i != e; ++i)
+ MIB.addReg(RegArgs[i]);
+
+ // Issue CALLSEQ_END
+ unsigned AdjStackUp = TM.getRegisterInfo()->getCallFrameDestroyOpcode();
+ BuildMI(MBB, TII.get(AdjStackUp)).addImm(NumBytes).addImm(0);
+
+ // Now handle call return value (if any).
+ if (RetVT.getSimpleVT() != MVT::isVoid) {
+ SmallVector<CCValAssign, 16> RVLocs;
+ CCState CCInfo(CC, false, TM, RVLocs);
+ CCInfo.AnalyzeCallResult(RetVT, RetCC_X86);
+
+ // Copy all of the result registers out of their specified physreg.
+ assert(RVLocs.size() == 1 && "Can't handle multi-value calls!");
+ MVT CopyVT = RVLocs[0].getValVT();
+ TargetRegisterClass* DstRC = TLI.getRegClassFor(CopyVT);
+ TargetRegisterClass *SrcRC = DstRC;
+
+ // If this is a call to a function that returns an fp value on the x87 fp
+ // stack, but where we prefer to use the value in xmm registers, copy it
+ // out as F80 and use a truncate to move it from fp stack reg to xmm reg.
+ if ((RVLocs[0].getLocReg() == X86::ST0 ||
+ RVLocs[0].getLocReg() == X86::ST1) &&
+ isScalarFPTypeInSSEReg(RVLocs[0].getValVT())) {
+ CopyVT = MVT::f80;
+ SrcRC = X86::RSTRegisterClass;
+ DstRC = X86::RFP80RegisterClass;
+ }
+
+ unsigned ResultReg = createResultReg(DstRC);
+ bool Emitted = TII.copyRegToReg(*MBB, MBB->end(), ResultReg,
+ RVLocs[0].getLocReg(), DstRC, SrcRC);
+ assert(Emitted && "Failed to emit a copy instruction!"); Emitted=Emitted;
+ Emitted = true;
+ if (CopyVT != RVLocs[0].getValVT()) {
+ // Round the F80 the right size, which also moves to the appropriate xmm
+ // register. This is accomplished by storing the F80 value in memory and
+ // then loading it back. Ewww...
+ MVT ResVT = RVLocs[0].getValVT();
+ unsigned Opc = ResVT == MVT::f32 ? X86::ST_Fp80m32 : X86::ST_Fp80m64;
+ unsigned MemSize = ResVT.getSizeInBits()/8;
+ int FI = MFI.CreateStackObject(MemSize, MemSize);
+ addFrameReference(BuildMI(MBB, TII.get(Opc)), FI).addReg(ResultReg);
+ DstRC = ResVT == MVT::f32
+ ? X86::FR32RegisterClass : X86::FR64RegisterClass;
+ Opc = ResVT == MVT::f32 ? X86::MOVSSrm : X86::MOVSDrm;
+ ResultReg = createResultReg(DstRC);
+ addFrameReference(BuildMI(MBB, TII.get(Opc), ResultReg), FI);
+ }
+
+ if (AndToI1) {
+ // Mask out all but lowest bit for some call which produces an i1.
+ unsigned AndResult = createResultReg(X86::GR8RegisterClass);
+ BuildMI(MBB, TII.get(X86::AND8ri), AndResult).addReg(ResultReg).addImm(1);
+ ResultReg = AndResult;
+ }
+
+ UpdateValueMap(I, ResultReg);
+ }
+
+ return true;
+}
+
+
bool
X86FastISel::TargetSelectInstruction(Instruction *I) {
switch (I->getOpcode()) {
return X86SelectZExt(I);
case Instruction::Br:
return X86SelectBranch(I);
+ case Instruction::Call:
+ return X86SelectCall(I);
case Instruction::LShr:
case Instruction::AShr:
case Instruction::Shl:
return X86SelectShift(I);
case Instruction::Select:
return X86SelectSelect(I);
+ case Instruction::Trunc:
+ return X86SelectTrunc(I);
+ case Instruction::FPExt:
+ return X86SelectFPExt(I);
+ case Instruction::FPTrunc:
+ return X86SelectFPTrunc(I);
+ case Instruction::ExtractValue:
+ return X86SelectExtractValue(I);
}
return false;
}
-unsigned X86FastISel::TargetMaterializeConstant(Constant *C,
- MachineConstantPool* MCP) {
- unsigned CPLoad = getRegForValue(C);
- if (CPLoad != 0)
- return CPLoad;
-
- // Can't handle PIC-mode yet.
- if (TM.getRelocationModel() == Reloc::PIC_)
- return 0;
-
- MVT VT = MVT::getMVT(C->getType(), /*HandleUnknown=*/true);
- if (VT == MVT::Other || !VT.isSimple())
- // Unhandled type. Halt "fast" selection and bail.
- return false;
- if (VT == MVT::iPTR)
- // Use pointer type.
- VT = TLI.getPointerTy();
- // We only handle legal types. For example, on x86-32 the instruction
- // selector contains all of the 64-bit instructions from x86-64,
- // under the assumption that i64 won't be used if the target doesn't
- // support it.
- if (!TLI.isTypeLegal(VT))
+unsigned X86FastISel::TargetMaterializeConstant(Constant *C) {
+ MVT VT;
+ if (!isTypeLegal(C->getType(), VT))
return false;
// Get opcode and regclass of the output for the given load instruction.
}
break;
case MVT::f80:
- Opc = X86::LD_Fp80m;
- RC = X86::RFP80RegisterClass;
- break;
+ // No f80 support yet.
+ return false;
}
- unsigned ResultReg = createResultReg(RC);
+ // Materialize addresses with LEA instructions.
if (isa<GlobalValue>(C)) {
- // FIXME: If store value type is something we can't handle, this can result
- // in a dead stub load instruction.
- if (X86SelectConstAddr(C, ResultReg))
+ X86AddressMode AM;
+ if (X86SelectAddress(C, AM, false)) {
+ if (TLI.getPointerTy() == MVT::i32)
+ Opc = X86::LEA32r;
+ else
+ Opc = X86::LEA64r;
+ unsigned ResultReg = createResultReg(RC);
+ addFullAddress(BuildMI(MBB, TII.get(Opc), ResultReg), AM);
return ResultReg;
+ }
return 0;
}
+ // MachineConstantPool wants an explicit alignment.
+ unsigned Align = TD.getPreferredTypeAlignmentShift(C->getType());
+ if (Align == 0) {
+ // Alignment of vector types. FIXME!
+ Align = TD.getABITypeSize(C->getType());
+ Align = Log2_64(Align);
+ }
- unsigned MCPOffset = MCP->getConstantPoolIndex(C, 0);
- addConstantPoolReference(BuildMI(MBB, TII.get(Opc), ResultReg), MCPOffset);
- UpdateValueMap(C, ResultReg);
+ // x86-32 PIC requires a PIC base register for constant pools.
+ unsigned PICBase = 0;
+ if (TM.getRelocationModel() == Reloc::PIC_ &&
+ !Subtarget->is64Bit())
+ PICBase = getInstrInfo()->getGlobalBaseReg(&MF);
+
+ // Create the load from the constant pool.
+ unsigned MCPOffset = MCP.getConstantPoolIndex(C, Align);
+ unsigned ResultReg = createResultReg(RC);
+ addConstantPoolReference(BuildMI(MBB, TII.get(Opc), ResultReg), MCPOffset,
+ PICBase);
+
+ return ResultReg;
+}
+
+unsigned X86FastISel::TargetMaterializeAlloca(AllocaInst *C) {
+ // Fail on dynamic allocas. At this point, getRegForValue has already
+ // checked its CSE maps, so if we're here trying to handle a dynamic
+ // alloca, we're not going to succeed. X86SelectAddress has a
+ // check for dynamic allocas, because it's called directly from
+ // various places, but TargetMaterializeAlloca also needs a check
+ // in order to avoid recursion between getRegForValue,
+ // X86SelectAddrss, and TargetMaterializeAlloca.
+ if (!StaticAllocaMap.count(C))
+ return 0;
+
+ X86AddressMode AM;
+ if (!X86SelectAddress(C, AM, false))
+ return 0;
+ unsigned Opc = Subtarget->is64Bit() ? X86::LEA64r : X86::LEA32r;
+ TargetRegisterClass* RC = TLI.getRegClassFor(TLI.getPointerTy());
+ unsigned ResultReg = createResultReg(RC);
+ addFullAddress(BuildMI(MBB, TII.get(Opc), ResultReg), AM);
return ResultReg;
}
namespace llvm {
llvm::FastISel *X86::createFastISel(MachineFunction &mf,
+ MachineModuleInfo *mmi,
DenseMap<const Value *, unsigned> &vm,
- DenseMap<const BasicBlock *, MachineBasicBlock *> &bm) {
- return new X86FastISel(mf, vm, bm);
+ DenseMap<const BasicBlock *, MachineBasicBlock *> &bm,
+ DenseMap<const AllocaInst *, int> &am
+#ifndef NDEBUG
+ , SmallSet<Instruction*, 8> &cil
+#endif
+ ) {
+ return new X86FastISel(mf, mmi, vm, bm, am
+#ifndef NDEBUG
+ , cil
+#endif
+ );
}
}