//===----------------------------------------------------------------------===//
namespace {
- /// X86ISelAddressMode - This corresponds to X86AddressMode, but uses
- /// SDValue's instead of register numbers for the leaves of the matched
- /// tree.
+ /// This corresponds to X86AddressMode, but uses SDValue's instead of register
+ /// numbers for the leaves of the matched tree.
struct X86ISelAddressMode {
enum {
RegBase,
const Constant *CP;
const BlockAddress *BlockAddr;
const char *ES;
+ MCSymbol *MCSym;
int JT;
unsigned Align; // CP alignment.
unsigned char SymbolFlags; // X86II::MO_*
X86ISelAddressMode()
- : BaseType(RegBase), Base_FrameIndex(0), Scale(1), IndexReg(), Disp(0),
- Segment(), GV(nullptr), CP(nullptr), BlockAddr(nullptr), ES(nullptr),
- JT(-1), Align(0), SymbolFlags(X86II::MO_NO_FLAG) {
- }
+ : BaseType(RegBase), Base_FrameIndex(0), Scale(1), IndexReg(), Disp(0),
+ Segment(), GV(nullptr), CP(nullptr), BlockAddr(nullptr), ES(nullptr),
+ MCSym(nullptr), JT(-1), Align(0), SymbolFlags(X86II::MO_NO_FLAG) {}
bool hasSymbolicDisplacement() const {
return GV != nullptr || CP != nullptr || ES != nullptr ||
- JT != -1 || BlockAddr != nullptr;
+ MCSym != nullptr || JT != -1 || BlockAddr != nullptr;
}
bool hasBaseOrIndexReg() const {
IndexReg.getNode() != nullptr || Base_Reg.getNode() != nullptr;
}
- /// isRIPRelative - Return true if this addressing mode is already RIP
- /// relative.
+ /// Return true if this addressing mode is already RIP-relative.
bool isRIPRelative() const {
if (BaseType != RegBase) return false;
if (RegisterSDNode *RegNode =
dbgs() << ES;
else
dbgs() << "nul";
+ dbgs() << " MCSym ";
+ if (MCSym)
+ dbgs() << MCSym;
+ else
+ dbgs() << "nul";
dbgs() << " JT" << JT << " Align" << Align << '\n';
}
#endif
namespace {
//===--------------------------------------------------------------------===//
- /// ISel - X86 specific code to select X86 machine instructions for
+ /// ISel - X86-specific code to select X86 machine instructions for
/// SelectionDAG operations.
///
class X86DAGToDAGISel final : public SelectionDAGISel {
- /// Subtarget - Keep a pointer to the X86Subtarget around so that we can
+ /// Keep a pointer to the X86Subtarget around so that we can
/// make the right decision when generating code for different targets.
const X86Subtarget *Subtarget;
- /// OptForSize - If true, selector should try to optimize for code size
- /// instead of performance.
+ /// If true, selector should try to optimize for code size instead of
+ /// performance.
bool OptForSize;
public:
return isInt<8>(cast<ConstantSDNode>(N)->getSExtValue());
}
- // i64immSExt32 predicate - True if the 64-bit immediate fits in a 32-bit
- // sign extended field.
+ // True if the 64-bit immediate fits in a 32-bit sign-extended field.
inline bool i64immSExt32(SDNode *N) const {
uint64_t v = cast<ConstantSDNode>(N)->getZExtValue();
return (int64_t)v == (int32_t)v;
private:
SDNode *Select(SDNode *N) override;
- SDNode *SelectGather(SDNode *N, unsigned Opc);
- SDNode *SelectAtomicLoadArith(SDNode *Node, MVT NVT);
-
- bool FoldOffsetIntoAddress(uint64_t Offset, X86ISelAddressMode &AM);
- bool MatchLoadInAddress(LoadSDNode *N, X86ISelAddressMode &AM);
- bool MatchWrapper(SDValue N, X86ISelAddressMode &AM);
- bool MatchAddress(SDValue N, X86ISelAddressMode &AM);
- bool MatchAddressRecursively(SDValue N, X86ISelAddressMode &AM,
+ SDNode *selectGather(SDNode *N, unsigned Opc);
+ SDNode *selectAtomicLoadArith(SDNode *Node, MVT NVT);
+
+ bool foldOffsetIntoAddress(uint64_t Offset, X86ISelAddressMode &AM);
+ bool matchLoadInAddress(LoadSDNode *N, X86ISelAddressMode &AM);
+ bool matchWrapper(SDValue N, X86ISelAddressMode &AM);
+ bool matchAddress(SDValue N, X86ISelAddressMode &AM);
+ bool matchAdd(SDValue N, X86ISelAddressMode &AM, unsigned Depth);
+ bool matchAddressRecursively(SDValue N, X86ISelAddressMode &AM,
unsigned Depth);
- bool MatchAddressBase(SDValue N, X86ISelAddressMode &AM);
- bool SelectAddr(SDNode *Parent, SDValue N, SDValue &Base,
+ bool matchAddressBase(SDValue N, X86ISelAddressMode &AM);
+ bool selectAddr(SDNode *Parent, SDValue N, SDValue &Base,
SDValue &Scale, SDValue &Index, SDValue &Disp,
SDValue &Segment);
- bool SelectMOV64Imm32(SDValue N, SDValue &Imm);
- bool SelectLEAAddr(SDValue N, SDValue &Base,
+ bool selectVectorAddr(SDNode *Parent, SDValue N, SDValue &Base,
+ SDValue &Scale, SDValue &Index, SDValue &Disp,
+ SDValue &Segment);
+ bool selectMOV64Imm32(SDValue N, SDValue &Imm);
+ bool selectLEAAddr(SDValue N, SDValue &Base,
SDValue &Scale, SDValue &Index, SDValue &Disp,
SDValue &Segment);
- bool SelectLEA64_32Addr(SDValue N, SDValue &Base,
+ bool selectLEA64_32Addr(SDValue N, SDValue &Base,
SDValue &Scale, SDValue &Index, SDValue &Disp,
SDValue &Segment);
- bool SelectTLSADDRAddr(SDValue N, SDValue &Base,
+ bool selectTLSADDRAddr(SDValue N, SDValue &Base,
SDValue &Scale, SDValue &Index, SDValue &Disp,
SDValue &Segment);
- bool SelectScalarSSELoad(SDNode *Root, SDValue N,
+ bool selectScalarSSELoad(SDNode *Root, SDValue N,
SDValue &Base, SDValue &Scale,
SDValue &Index, SDValue &Disp,
SDValue &Segment,
SDValue &NodeWithChain);
- bool TryFoldLoad(SDNode *P, SDValue N,
+ bool tryFoldLoad(SDNode *P, SDValue N,
SDValue &Base, SDValue &Scale,
SDValue &Index, SDValue &Disp,
SDValue &Segment);
- /// SelectInlineAsmMemoryOperand - Implement addressing mode selection for
- /// inline asm expressions.
+ /// Implement addressing mode selection for inline asm expressions.
bool SelectInlineAsmMemoryOperand(const SDValue &Op,
- char ConstraintCode,
+ unsigned ConstraintID,
std::vector<SDValue> &OutOps) override;
- void EmitSpecialCodeForMain();
+ void emitSpecialCodeForMain();
- inline void getAddressOperands(X86ISelAddressMode &AM, SDValue &Base,
- SDValue &Scale, SDValue &Index,
- SDValue &Disp, SDValue &Segment) {
+ inline void getAddressOperands(X86ISelAddressMode &AM, SDLoc DL,
+ SDValue &Base, SDValue &Scale,
+ SDValue &Index, SDValue &Disp,
+ SDValue &Segment) {
Base = (AM.BaseType == X86ISelAddressMode::FrameIndexBase)
- ? CurDAG->getTargetFrameIndex(AM.Base_FrameIndex,
- TLI->getPointerTy())
+ ? CurDAG->getTargetFrameIndex(
+ AM.Base_FrameIndex,
+ TLI->getPointerTy(CurDAG->getDataLayout()))
: AM.Base_Reg;
- Scale = getI8Imm(AM.Scale);
+ Scale = getI8Imm(AM.Scale, DL);
Index = AM.IndexReg;
- // These are 32-bit even in 64-bit mode since RIP relative offset
+ // These are 32-bit even in 64-bit mode since RIP-relative offset
// is 32-bit.
if (AM.GV)
Disp = CurDAG->getTargetGlobalAddress(AM.GV, SDLoc(),
else if (AM.ES) {
assert(!AM.Disp && "Non-zero displacement is ignored with ES.");
Disp = CurDAG->getTargetExternalSymbol(AM.ES, MVT::i32, AM.SymbolFlags);
+ } else if (AM.MCSym) {
+ assert(!AM.Disp && "Non-zero displacement is ignored with MCSym.");
+ assert(AM.SymbolFlags == 0 && "oo");
+ Disp = CurDAG->getMCSymbol(AM.MCSym, MVT::i32);
} else if (AM.JT != -1) {
assert(!AM.Disp && "Non-zero displacement is ignored with JT.");
Disp = CurDAG->getTargetJumpTable(AM.JT, MVT::i32, AM.SymbolFlags);
Disp = CurDAG->getTargetBlockAddress(AM.BlockAddr, MVT::i32, AM.Disp,
AM.SymbolFlags);
else
- Disp = CurDAG->getTargetConstant(AM.Disp, MVT::i32);
+ Disp = CurDAG->getTargetConstant(AM.Disp, DL, MVT::i32);
if (AM.Segment.getNode())
Segment = AM.Segment;
Segment = CurDAG->getRegister(0, MVT::i32);
}
- /// getI8Imm - Return a target constant with the specified value, of type
- /// i8.
- inline SDValue getI8Imm(unsigned Imm) {
- return CurDAG->getTargetConstant(Imm, MVT::i8);
+ // Utility function to determine whether we should avoid selecting
+ // immediate forms of instructions for better code size or not.
+ // At a high level, we'd like to avoid such instructions when
+ // we have similar constants used within the same basic block
+ // that can be kept in a register.
+ //
+ bool shouldAvoidImmediateInstFormsForSize(SDNode *N) const {
+ uint32_t UseCount = 0;
+
+ // Do not want to hoist if we're not optimizing for size.
+ // TODO: We'd like to remove this restriction.
+ // See the comment in X86InstrInfo.td for more info.
+ if (!OptForSize)
+ return false;
+
+ // Walk all the users of the immediate.
+ for (SDNode::use_iterator UI = N->use_begin(),
+ UE = N->use_end(); (UI != UE) && (UseCount < 2); ++UI) {
+
+ SDNode *User = *UI;
+
+ // This user is already selected. Count it as a legitimate use and
+ // move on.
+ if (User->isMachineOpcode()) {
+ UseCount++;
+ continue;
+ }
+
+ // We want to count stores of immediates as real uses.
+ if (User->getOpcode() == ISD::STORE &&
+ User->getOperand(1).getNode() == N) {
+ UseCount++;
+ continue;
+ }
+
+ // We don't currently match users that have > 2 operands (except
+ // for stores, which are handled above)
+ // Those instruction won't match in ISEL, for now, and would
+ // be counted incorrectly.
+ // This may change in the future as we add additional instruction
+ // types.
+ if (User->getNumOperands() != 2)
+ continue;
+
+ // Immediates that are used for offsets as part of stack
+ // manipulation should be left alone. These are typically
+ // used to indicate SP offsets for argument passing and
+ // will get pulled into stores/pushes (implicitly).
+ if (User->getOpcode() == X86ISD::ADD ||
+ User->getOpcode() == ISD::ADD ||
+ User->getOpcode() == X86ISD::SUB ||
+ User->getOpcode() == ISD::SUB) {
+
+ // Find the other operand of the add/sub.
+ SDValue OtherOp = User->getOperand(0);
+ if (OtherOp.getNode() == N)
+ OtherOp = User->getOperand(1);
+
+ // Don't count if the other operand is SP.
+ RegisterSDNode *RegNode;
+ if (OtherOp->getOpcode() == ISD::CopyFromReg &&
+ (RegNode = dyn_cast_or_null<RegisterSDNode>(
+ OtherOp->getOperand(1).getNode())))
+ if ((RegNode->getReg() == X86::ESP) ||
+ (RegNode->getReg() == X86::RSP))
+ continue;
+ }
+
+ // ... otherwise, count this and move on.
+ UseCount++;
+ }
+
+ // If we have more than 1 use, then recommend for hoisting.
+ return (UseCount > 1);
+ }
+
+ /// Return a target constant with the specified value of type i8.
+ inline SDValue getI8Imm(unsigned Imm, SDLoc DL) {
+ return CurDAG->getTargetConstant(Imm, DL, MVT::i8);
}
- /// getI32Imm - Return a target constant with the specified value, of type
- /// i32.
- inline SDValue getI32Imm(unsigned Imm) {
- return CurDAG->getTargetConstant(Imm, MVT::i32);
+ /// Return a target constant with the specified value, of type i32.
+ inline SDValue getI32Imm(unsigned Imm, SDLoc DL) {
+ return CurDAG->getTargetConstant(Imm, DL, MVT::i32);
}
- /// getGlobalBaseReg - Return an SDNode that returns the value of
- /// the global base register. Output instructions required to
- /// initialize the global base register, if necessary.
- ///
+ /// Return an SDNode that returns the value of the global base register.
+ /// Output instructions required to initialize the global base register,
+ /// if necessary.
SDNode *getGlobalBaseReg();
- /// getTargetMachine - Return a reference to the TargetMachine, casted
- /// to the target-specific type.
+ /// Return a reference to the TargetMachine, casted to the target-specific
+ /// type.
const X86TargetMachine &getTargetMachine() const {
return static_cast<const X86TargetMachine &>(TM);
}
- /// getInstrInfo - Return a reference to the TargetInstrInfo, casted
- /// to the target-specific type.
+ /// Return a reference to the TargetInstrInfo, casted to the target-specific
+ /// type.
const X86InstrInfo *getInstrInfo() const {
return Subtarget->getInstrInfo();
}
return true;
}
-/// MoveBelowCallOrigChain - Replace the original chain operand of the call with
+/// Replace the original chain operand of the call with
/// load's chain operand and move load below the call's chain operand.
-static void MoveBelowOrigChain(SelectionDAG *CurDAG, SDValue Load,
+static void moveBelowOrigChain(SelectionDAG *CurDAG, SDValue Load,
SDValue Call, SDValue OrigChain) {
SmallVector<SDValue, 8> Ops;
SDValue Chain = OrigChain.getOperand(0);
CurDAG->UpdateNodeOperands(Call.getNode(), Ops);
}
-/// isCalleeLoad - Return true if call address is a load and it can be
+/// Return true if call address is a load and it can be
/// moved below CALLSEQ_START and the chains leading up to the call.
/// Return the CALLSEQ_START by reference as a second output.
/// In the case of a tail call, there isn't a callseq node between the call
void X86DAGToDAGISel::PreprocessISelDAG() {
// OptForSize is used in pattern predicates that isel is matching.
- OptForSize = MF->getFunction()->hasFnAttribute(Attribute::OptimizeForSize);
+ OptForSize = MF->getFunction()->optForSize();
for (SelectionDAG::allnodes_iterator I = CurDAG->allnodes_begin(),
E = CurDAG->allnodes_end(); I != E; ) {
- SDNode *N = I++; // Preincrement iterator to avoid invalidation issues.
+ SDNode *N = &*I++; // Preincrement iterator to avoid invalidation issues.
if (OptLevel != CodeGenOpt::None &&
// Only does this when target favors doesn't favor register indirect
SDValue Load = N->getOperand(1);
if (!isCalleeLoad(Load, Chain, HasCallSeq))
continue;
- MoveBelowOrigChain(CurDAG, Load, SDValue(N, 0), Chain);
+ moveBelowOrigChain(CurDAG, Load, SDValue(N, 0), Chain);
++NumLoadMoved;
continue;
}
}
-/// EmitSpecialCodeForMain - Emit any code that needs to be executed only in
-/// the main function.
-void X86DAGToDAGISel::EmitSpecialCodeForMain() {
+/// Emit any code that needs to be executed only in the main function.
+void X86DAGToDAGISel::emitSpecialCodeForMain() {
if (Subtarget->isTargetCygMing()) {
TargetLowering::ArgListTy Args;
+ auto &DL = CurDAG->getDataLayout();
TargetLowering::CallLoweringInfo CLI(*CurDAG);
CLI.setChain(CurDAG->getRoot())
.setCallee(CallingConv::C, Type::getVoidTy(*CurDAG->getContext()),
- CurDAG->getExternalSymbol("__main", TLI->getPointerTy()),
+ CurDAG->getExternalSymbol("__main", TLI->getPointerTy(DL)),
std::move(Args), 0);
const TargetLowering &TLI = CurDAG->getTargetLoweringInfo();
std::pair<SDValue, SDValue> Result = TLI.LowerCallTo(CLI);
// If this is main, emit special code for main.
if (const Function *Fn = MF->getFunction())
if (Fn->hasExternalLinkage() && Fn->getName() == "main")
- EmitSpecialCodeForMain();
+ emitSpecialCodeForMain();
}
static bool isDispSafeForFrameIndex(int64_t Val) {
return isInt<31>(Val);
}
-bool X86DAGToDAGISel::FoldOffsetIntoAddress(uint64_t Offset,
+bool X86DAGToDAGISel::foldOffsetIntoAddress(uint64_t Offset,
X86ISelAddressMode &AM) {
+ // Cannot combine ExternalSymbol displacements with integer offsets.
+ if (Offset != 0 && (AM.ES || AM.MCSym))
+ return true;
int64_t Val = AM.Disp + Offset;
CodeModel::Model M = TM.getCodeModel();
if (Subtarget->is64Bit()) {
}
-bool X86DAGToDAGISel::MatchLoadInAddress(LoadSDNode *N, X86ISelAddressMode &AM){
+bool X86DAGToDAGISel::matchLoadInAddress(LoadSDNode *N, X86ISelAddressMode &AM){
SDValue Address = N->getOperand(1);
// load gs:0 -> GS segment register.
return true;
}
-/// MatchWrapper - Try to match X86ISD::Wrapper and X86ISD::WrapperRIP nodes
-/// into an addressing mode. These wrap things that will resolve down into a
-/// symbol reference. If no match is possible, this returns true, otherwise it
-/// returns false.
-bool X86DAGToDAGISel::MatchWrapper(SDValue N, X86ISelAddressMode &AM) {
+/// Try to match X86ISD::Wrapper and X86ISD::WrapperRIP nodes into an addressing
+/// mode. These wrap things that will resolve down into a symbol reference.
+/// If no match is possible, this returns true, otherwise it returns false.
+bool X86DAGToDAGISel::matchWrapper(SDValue N, X86ISelAddressMode &AM) {
// If the addressing mode already has a symbol as the displacement, we can
// never match another symbol.
if (AM.hasSymbolicDisplacement())
X86ISelAddressMode Backup = AM;
AM.GV = G->getGlobal();
AM.SymbolFlags = G->getTargetFlags();
- if (FoldOffsetIntoAddress(G->getOffset(), AM)) {
+ if (foldOffsetIntoAddress(G->getOffset(), AM)) {
AM = Backup;
return true;
}
AM.CP = CP->getConstVal();
AM.Align = CP->getAlignment();
AM.SymbolFlags = CP->getTargetFlags();
- if (FoldOffsetIntoAddress(CP->getOffset(), AM)) {
+ if (foldOffsetIntoAddress(CP->getOffset(), AM)) {
AM = Backup;
return true;
}
} else if (ExternalSymbolSDNode *S = dyn_cast<ExternalSymbolSDNode>(N0)) {
AM.ES = S->getSymbol();
AM.SymbolFlags = S->getTargetFlags();
+ } else if (auto *S = dyn_cast<MCSymbolSDNode>(N0)) {
+ AM.MCSym = S->getMCSymbol();
} else if (JumpTableSDNode *J = dyn_cast<JumpTableSDNode>(N0)) {
AM.JT = J->getIndex();
AM.SymbolFlags = J->getTargetFlags();
X86ISelAddressMode Backup = AM;
AM.BlockAddr = BA->getBlockAddress();
AM.SymbolFlags = BA->getTargetFlags();
- if (FoldOffsetIntoAddress(BA->getOffset(), AM)) {
+ if (foldOffsetIntoAddress(BA->getOffset(), AM)) {
AM = Backup;
return true;
}
} else if (ExternalSymbolSDNode *S = dyn_cast<ExternalSymbolSDNode>(N0)) {
AM.ES = S->getSymbol();
AM.SymbolFlags = S->getTargetFlags();
+ } else if (auto *S = dyn_cast<MCSymbolSDNode>(N0)) {
+ AM.MCSym = S->getMCSymbol();
} else if (JumpTableSDNode *J = dyn_cast<JumpTableSDNode>(N0)) {
AM.JT = J->getIndex();
AM.SymbolFlags = J->getTargetFlags();
return true;
}
-/// MatchAddress - Add the specified node to the specified addressing mode,
-/// returning true if it cannot be done. This just pattern matches for the
-/// addressing mode.
-bool X86DAGToDAGISel::MatchAddress(SDValue N, X86ISelAddressMode &AM) {
- if (MatchAddressRecursively(N, AM, 0))
+/// Add the specified node to the specified addressing mode, returning true if
+/// it cannot be done. This just pattern matches for the addressing mode.
+bool X86DAGToDAGISel::matchAddress(SDValue N, X86ISelAddressMode &AM) {
+ if (matchAddressRecursively(N, AM, 0))
return true;
// Post-processing: Convert lea(,%reg,2) to lea(%reg,%reg), which has
return false;
}
+bool X86DAGToDAGISel::matchAdd(SDValue N, X86ISelAddressMode &AM,
+ unsigned Depth) {
+ // Add an artificial use to this node so that we can keep track of
+ // it if it gets CSE'd with a different node.
+ HandleSDNode Handle(N);
+
+ X86ISelAddressMode Backup = AM;
+ if (!matchAddressRecursively(N.getOperand(0), AM, Depth+1) &&
+ !matchAddressRecursively(Handle.getValue().getOperand(1), AM, Depth+1))
+ return false;
+ AM = Backup;
+
+ // Try again after commuting the operands.
+ if (!matchAddressRecursively(Handle.getValue().getOperand(1), AM, Depth+1) &&
+ !matchAddressRecursively(Handle.getValue().getOperand(0), AM, Depth+1))
+ return false;
+ AM = Backup;
+
+ // If we couldn't fold both operands into the address at the same time,
+ // see if we can just put each operand into a register and fold at least
+ // the add.
+ if (AM.BaseType == X86ISelAddressMode::RegBase &&
+ !AM.Base_Reg.getNode() &&
+ !AM.IndexReg.getNode()) {
+ N = Handle.getValue();
+ AM.Base_Reg = N.getOperand(0);
+ AM.IndexReg = N.getOperand(1);
+ AM.Scale = 1;
+ return false;
+ }
+ N = Handle.getValue();
+ return true;
+}
+
// Insert a node into the DAG at least before the Pos node's position. This
// will reposition the node as needed, and will assign it a node ID that is <=
// the Pos node's ID. Note that this does *not* preserve the uniqueness of node
// IDs! The selection DAG must no longer depend on their uniqueness when this
// is used.
-static void InsertDAGNode(SelectionDAG &DAG, SDValue Pos, SDValue N) {
+static void insertDAGNode(SelectionDAG &DAG, SDValue Pos, SDValue N) {
if (N.getNode()->getNodeId() == -1 ||
N.getNode()->getNodeId() > Pos.getNode()->getNodeId()) {
- DAG.RepositionNode(Pos.getNode(), N.getNode());
+ DAG.RepositionNode(Pos.getNode()->getIterator(), N.getNode());
N.getNode()->setNodeId(Pos.getNode()->getNodeId());
}
}
// safe. This allows us to convert the shift and and into an h-register
// extract and a scaled index. Returns false if the simplification is
// performed.
-static bool FoldMaskAndShiftToExtract(SelectionDAG &DAG, SDValue N,
+static bool foldMaskAndShiftToExtract(SelectionDAG &DAG, SDValue N,
uint64_t Mask,
SDValue Shift, SDValue X,
X86ISelAddressMode &AM) {
MVT VT = N.getSimpleValueType();
SDLoc DL(N);
- SDValue Eight = DAG.getConstant(8, MVT::i8);
- SDValue NewMask = DAG.getConstant(0xff, VT);
+ SDValue Eight = DAG.getConstant(8, DL, MVT::i8);
+ SDValue NewMask = DAG.getConstant(0xff, DL, VT);
SDValue Srl = DAG.getNode(ISD::SRL, DL, VT, X, Eight);
SDValue And = DAG.getNode(ISD::AND, DL, VT, Srl, NewMask);
- SDValue ShlCount = DAG.getConstant(ScaleLog, MVT::i8);
+ SDValue ShlCount = DAG.getConstant(ScaleLog, DL, MVT::i8);
SDValue Shl = DAG.getNode(ISD::SHL, DL, VT, And, ShlCount);
// Insert the new nodes into the topological ordering. We must do this in
// these nodes. We continually insert before 'N' in sequence as this is
// essentially a pre-flattened and pre-sorted sequence of nodes. There is no
// hierarchy left to express.
- InsertDAGNode(DAG, N, Eight);
- InsertDAGNode(DAG, N, Srl);
- InsertDAGNode(DAG, N, NewMask);
- InsertDAGNode(DAG, N, And);
- InsertDAGNode(DAG, N, ShlCount);
- InsertDAGNode(DAG, N, Shl);
+ insertDAGNode(DAG, N, Eight);
+ insertDAGNode(DAG, N, Srl);
+ insertDAGNode(DAG, N, NewMask);
+ insertDAGNode(DAG, N, And);
+ insertDAGNode(DAG, N, ShlCount);
+ insertDAGNode(DAG, N, Shl);
DAG.ReplaceAllUsesWith(N, Shl);
AM.IndexReg = And;
AM.Scale = (1 << ScaleLog);
// Transforms "(X << C1) & C2" to "(X & (C2>>C1)) << C1" if safe and if this
// allows us to fold the shift into this addressing mode. Returns false if the
// transform succeeded.
-static bool FoldMaskedShiftToScaledMask(SelectionDAG &DAG, SDValue N,
+static bool foldMaskedShiftToScaledMask(SelectionDAG &DAG, SDValue N,
uint64_t Mask,
SDValue Shift, SDValue X,
X86ISelAddressMode &AM) {
MVT VT = N.getSimpleValueType();
SDLoc DL(N);
- SDValue NewMask = DAG.getConstant(Mask >> ShiftAmt, VT);
+ SDValue NewMask = DAG.getConstant(Mask >> ShiftAmt, DL, VT);
SDValue NewAnd = DAG.getNode(ISD::AND, DL, VT, X, NewMask);
SDValue NewShift = DAG.getNode(ISD::SHL, DL, VT, NewAnd, Shift.getOperand(1));
// these nodes. We continually insert before 'N' in sequence as this is
// essentially a pre-flattened and pre-sorted sequence of nodes. There is no
// hierarchy left to express.
- InsertDAGNode(DAG, N, NewMask);
- InsertDAGNode(DAG, N, NewAnd);
- InsertDAGNode(DAG, N, NewShift);
+ insertDAGNode(DAG, N, NewMask);
+ insertDAGNode(DAG, N, NewAnd);
+ insertDAGNode(DAG, N, NewShift);
DAG.ReplaceAllUsesWith(N, NewShift);
AM.Scale = 1 << ShiftAmt;
// Note that this function assumes the mask is provided as a mask *after* the
// value is shifted. The input chain may or may not match that, but computing
// such a mask is trivial.
-static bool FoldMaskAndShiftToScale(SelectionDAG &DAG, SDValue N,
+static bool foldMaskAndShiftToScale(SelectionDAG &DAG, SDValue N,
uint64_t Mask,
SDValue Shift, SDValue X,
X86ISelAddressMode &AM) {
assert(X.getValueType() != VT);
// We looked through an ANY_EXTEND node, insert a ZERO_EXTEND.
SDValue NewX = DAG.getNode(ISD::ZERO_EXTEND, SDLoc(X), VT, X);
- InsertDAGNode(DAG, N, NewX);
+ insertDAGNode(DAG, N, NewX);
X = NewX;
}
SDLoc DL(N);
- SDValue NewSRLAmt = DAG.getConstant(ShiftAmt + AMShiftAmt, MVT::i8);
+ SDValue NewSRLAmt = DAG.getConstant(ShiftAmt + AMShiftAmt, DL, MVT::i8);
SDValue NewSRL = DAG.getNode(ISD::SRL, DL, VT, X, NewSRLAmt);
- SDValue NewSHLAmt = DAG.getConstant(AMShiftAmt, MVT::i8);
+ SDValue NewSHLAmt = DAG.getConstant(AMShiftAmt, DL, MVT::i8);
SDValue NewSHL = DAG.getNode(ISD::SHL, DL, VT, NewSRL, NewSHLAmt);
// Insert the new nodes into the topological ordering. We must do this in
// these nodes. We continually insert before 'N' in sequence as this is
// essentially a pre-flattened and pre-sorted sequence of nodes. There is no
// hierarchy left to express.
- InsertDAGNode(DAG, N, NewSRLAmt);
- InsertDAGNode(DAG, N, NewSRL);
- InsertDAGNode(DAG, N, NewSHLAmt);
- InsertDAGNode(DAG, N, NewSHL);
+ insertDAGNode(DAG, N, NewSRLAmt);
+ insertDAGNode(DAG, N, NewSRL);
+ insertDAGNode(DAG, N, NewSHLAmt);
+ insertDAGNode(DAG, N, NewSHL);
DAG.ReplaceAllUsesWith(N, NewSHL);
AM.Scale = 1 << AMShiftAmt;
return false;
}
-bool X86DAGToDAGISel::MatchAddressRecursively(SDValue N, X86ISelAddressMode &AM,
+bool X86DAGToDAGISel::matchAddressRecursively(SDValue N, X86ISelAddressMode &AM,
unsigned Depth) {
SDLoc dl(N);
DEBUG({
});
// Limit recursion.
if (Depth > 5)
- return MatchAddressBase(N, AM);
+ return matchAddressBase(N, AM);
// If this is already a %rip relative address, we can only merge immediates
// into it. Instead of handling this in every case, we handle it here.
// FIXME: JumpTable and ExternalSymbol address currently don't like
// displacements. It isn't very important, but this should be fixed for
// consistency.
- if (!AM.ES && AM.JT != -1) return true;
+ if (!(AM.ES || AM.MCSym) && AM.JT != -1)
+ return true;
if (ConstantSDNode *Cst = dyn_cast<ConstantSDNode>(N))
- if (!FoldOffsetIntoAddress(Cst->getSExtValue(), AM))
+ if (!foldOffsetIntoAddress(Cst->getSExtValue(), AM))
return false;
return true;
}
switch (N.getOpcode()) {
default: break;
- case ISD::FRAME_ALLOC_RECOVER: {
- if (!AM.hasSymbolicDisplacement())
- if (const auto *ESNode = dyn_cast<ExternalSymbolSDNode>(N.getOperand(0)))
- if (ESNode->getOpcode() == ISD::TargetExternalSymbol) {
- AM.ES = ESNode->getSymbol();
- return false;
- }
+ case ISD::LOCAL_RECOVER: {
+ if (!AM.hasSymbolicDisplacement() && AM.Disp == 0)
+ if (const auto *ESNode = dyn_cast<MCSymbolSDNode>(N.getOperand(0))) {
+ // Use the symbol and don't prefix it.
+ AM.MCSym = ESNode->getMCSymbol();
+ return false;
+ }
break;
}
case ISD::Constant: {
uint64_t Val = cast<ConstantSDNode>(N)->getSExtValue();
- if (!FoldOffsetIntoAddress(Val, AM))
+ if (!foldOffsetIntoAddress(Val, AM))
return false;
break;
}
case X86ISD::Wrapper:
case X86ISD::WrapperRIP:
- if (!MatchWrapper(N, AM))
+ if (!matchWrapper(N, AM))
return false;
break;
case ISD::LOAD:
- if (!MatchLoadInAddress(cast<LoadSDNode>(N), AM))
+ if (!matchLoadInAddress(cast<LoadSDNode>(N), AM))
return false;
break;
ConstantSDNode *AddVal =
cast<ConstantSDNode>(ShVal.getNode()->getOperand(1));
uint64_t Disp = (uint64_t)AddVal->getSExtValue() << Val;
- if (!FoldOffsetIntoAddress(Disp, AM))
+ if (!foldOffsetIntoAddress(Disp, AM))
return false;
}
// Try to fold the mask and shift into the scale, and return false if we
// succeed.
- if (!FoldMaskAndShiftToScale(*CurDAG, N, Mask, N, X, AM))
+ if (!foldMaskAndShiftToScale(*CurDAG, N, Mask, N, X, AM))
return false;
break;
}
ConstantSDNode *AddVal =
cast<ConstantSDNode>(MulVal.getNode()->getOperand(1));
uint64_t Disp = AddVal->getSExtValue() * CN->getZExtValue();
- if (FoldOffsetIntoAddress(Disp, AM))
+ if (foldOffsetIntoAddress(Disp, AM))
Reg = N.getNode()->getOperand(0);
} else {
Reg = N.getNode()->getOperand(0);
// Test if the LHS of the sub can be folded.
X86ISelAddressMode Backup = AM;
- if (MatchAddressRecursively(N.getNode()->getOperand(0), AM, Depth+1)) {
+ if (matchAddressRecursively(N.getNode()->getOperand(0), AM, Depth+1)) {
AM = Backup;
break;
}
}
// Ok, the transformation is legal and appears profitable. Go for it.
- SDValue Zero = CurDAG->getConstant(0, N.getValueType());
+ SDValue Zero = CurDAG->getConstant(0, dl, N.getValueType());
SDValue Neg = CurDAG->getNode(ISD::SUB, dl, N.getValueType(), Zero, RHS);
AM.IndexReg = Neg;
AM.Scale = 1;
// Insert the new nodes into the topological ordering.
- InsertDAGNode(*CurDAG, N, Zero);
- InsertDAGNode(*CurDAG, N, Neg);
+ insertDAGNode(*CurDAG, N, Zero);
+ insertDAGNode(*CurDAG, N, Neg);
return false;
}
- case ISD::ADD: {
- // Add an artificial use to this node so that we can keep track of
- // it if it gets CSE'd with a different node.
- HandleSDNode Handle(N);
-
- X86ISelAddressMode Backup = AM;
- if (!MatchAddressRecursively(N.getOperand(0), AM, Depth+1) &&
- !MatchAddressRecursively(Handle.getValue().getOperand(1), AM, Depth+1))
- return false;
- AM = Backup;
-
- // Try again after commuting the operands.
- if (!MatchAddressRecursively(Handle.getValue().getOperand(1), AM, Depth+1)&&
- !MatchAddressRecursively(Handle.getValue().getOperand(0), AM, Depth+1))
- return false;
- AM = Backup;
-
- // If we couldn't fold both operands into the address at the same time,
- // see if we can just put each operand into a register and fold at least
- // the add.
- if (AM.BaseType == X86ISelAddressMode::RegBase &&
- !AM.Base_Reg.getNode() &&
- !AM.IndexReg.getNode()) {
- N = Handle.getValue();
- AM.Base_Reg = N.getOperand(0);
- AM.IndexReg = N.getOperand(1);
- AM.Scale = 1;
+ case ISD::ADD:
+ if (!matchAdd(N, AM, Depth))
return false;
- }
- N = Handle.getValue();
break;
- }
case ISD::OR:
// Handle "X | C" as "X + C" iff X is known to have C bits clear.
ConstantSDNode *CN = cast<ConstantSDNode>(N.getOperand(1));
// Start with the LHS as an addr mode.
- if (!MatchAddressRecursively(N.getOperand(0), AM, Depth+1) &&
- !FoldOffsetIntoAddress(CN->getSExtValue(), AM))
+ if (!matchAddressRecursively(N.getOperand(0), AM, Depth+1) &&
+ !foldOffsetIntoAddress(CN->getSExtValue(), AM))
return false;
AM = Backup;
}
uint64_t Mask = N.getConstantOperandVal(1);
// Try to fold the mask and shift into an extract and scale.
- if (!FoldMaskAndShiftToExtract(*CurDAG, N, Mask, Shift, X, AM))
+ if (!foldMaskAndShiftToExtract(*CurDAG, N, Mask, Shift, X, AM))
return false;
// Try to fold the mask and shift directly into the scale.
- if (!FoldMaskAndShiftToScale(*CurDAG, N, Mask, Shift, X, AM))
+ if (!foldMaskAndShiftToScale(*CurDAG, N, Mask, Shift, X, AM))
return false;
// Try to swap the mask and shift to place shifts which can be done as
// a scale on the outside of the mask.
- if (!FoldMaskedShiftToScaledMask(*CurDAG, N, Mask, Shift, X, AM))
+ if (!foldMaskedShiftToScaledMask(*CurDAG, N, Mask, Shift, X, AM))
return false;
break;
}
}
- return MatchAddressBase(N, AM);
+ return matchAddressBase(N, AM);
}
-/// MatchAddressBase - Helper for MatchAddress. Add the specified node to the
+/// Helper for MatchAddress. Add the specified node to the
/// specified addressing mode without any further recursion.
-bool X86DAGToDAGISel::MatchAddressBase(SDValue N, X86ISelAddressMode &AM) {
+bool X86DAGToDAGISel::matchAddressBase(SDValue N, X86ISelAddressMode &AM) {
// Is the base register already occupied?
if (AM.BaseType != X86ISelAddressMode::RegBase || AM.Base_Reg.getNode()) {
// If so, check to see if the scale index register is set.
return false;
}
-/// SelectAddr - returns true if it is able pattern match an addressing mode.
+bool X86DAGToDAGISel::selectVectorAddr(SDNode *Parent, SDValue N, SDValue &Base,
+ SDValue &Scale, SDValue &Index,
+ SDValue &Disp, SDValue &Segment) {
+
+ MaskedGatherScatterSDNode *Mgs = dyn_cast<MaskedGatherScatterSDNode>(Parent);
+ if (!Mgs)
+ return false;
+ X86ISelAddressMode AM;
+ unsigned AddrSpace = Mgs->getPointerInfo().getAddrSpace();
+ // AddrSpace 256 -> GS, 257 -> FS.
+ if (AddrSpace == 256)
+ AM.Segment = CurDAG->getRegister(X86::GS, MVT::i16);
+ if (AddrSpace == 257)
+ AM.Segment = CurDAG->getRegister(X86::FS, MVT::i16);
+
+ SDLoc DL(N);
+ Base = Mgs->getBasePtr();
+ Index = Mgs->getIndex();
+ unsigned ScalarSize = Mgs->getValue().getValueType().getScalarSizeInBits();
+ Scale = getI8Imm(ScalarSize/8, DL);
+
+ // If Base is 0, the whole address is in index and the Scale is 1
+ if (isa<ConstantSDNode>(Base)) {
+ assert(cast<ConstantSDNode>(Base)->isNullValue() &&
+ "Unexpected base in gather/scatter");
+ Scale = getI8Imm(1, DL);
+ Base = CurDAG->getRegister(0, MVT::i32);
+ }
+ if (AM.Segment.getNode())
+ Segment = AM.Segment;
+ else
+ Segment = CurDAG->getRegister(0, MVT::i32);
+ Disp = CurDAG->getTargetConstant(0, DL, MVT::i32);
+ return true;
+}
+
+/// Returns true if it is able to pattern match an addressing mode.
/// It returns the operands which make up the maximal addressing mode it can
/// match by reference.
///
/// Parent is the parent node of the addr operand that is being matched. It
/// is always a load, store, atomic node, or null. It is only null when
/// checking memory operands for inline asm nodes.
-bool X86DAGToDAGISel::SelectAddr(SDNode *Parent, SDValue N, SDValue &Base,
+bool X86DAGToDAGISel::selectAddr(SDNode *Parent, SDValue N, SDValue &Base,
SDValue &Scale, SDValue &Index,
SDValue &Disp, SDValue &Segment) {
X86ISelAddressMode AM;
AM.Segment = CurDAG->getRegister(X86::FS, MVT::i16);
}
- if (MatchAddress(N, AM))
+ if (matchAddress(N, AM))
return false;
MVT VT = N.getSimpleValueType();
if (!AM.IndexReg.getNode())
AM.IndexReg = CurDAG->getRegister(0, VT);
- getAddressOperands(AM, Base, Scale, Index, Disp, Segment);
+ getAddressOperands(AM, SDLoc(N), Base, Scale, Index, Disp, Segment);
return true;
}
-/// SelectScalarSSELoad - Match a scalar SSE load. In particular, we want to
-/// match a load whose top elements are either undef or zeros. The load flavor
-/// is derived from the type of N, which is either v4f32 or v2f64.
+/// Match a scalar SSE load. In particular, we want to match a load whose top
+/// elements are either undef or zeros. The load flavor is derived from the
+/// type of N, which is either v4f32 or v2f64.
///
/// We also return:
/// PatternChainNode: this is the matched node that has a chain input and
/// output.
-bool X86DAGToDAGISel::SelectScalarSSELoad(SDNode *Root,
+bool X86DAGToDAGISel::selectScalarSSELoad(SDNode *Root,
SDValue N, SDValue &Base,
SDValue &Scale, SDValue &Index,
SDValue &Disp, SDValue &Segment,
IsProfitableToFold(N.getOperand(0), N.getNode(), Root) &&
IsLegalToFold(N.getOperand(0), N.getNode(), Root, OptLevel)) {
LoadSDNode *LD = cast<LoadSDNode>(PatternNodeWithChain);
- if (!SelectAddr(LD, LD->getBasePtr(), Base, Scale, Index, Disp, Segment))
+ if (!selectAddr(LD, LD->getBasePtr(), Base, Scale, Index, Disp, Segment))
return false;
return true;
}
IsLegalToFold(N.getOperand(0), N.getNode(), Root, OptLevel)) {
// Okay, this is a zero extending load. Fold it.
LoadSDNode *LD = cast<LoadSDNode>(N.getOperand(0).getOperand(0));
- if (!SelectAddr(LD, LD->getBasePtr(), Base, Scale, Index, Disp, Segment))
+ if (!selectAddr(LD, LD->getBasePtr(), Base, Scale, Index, Disp, Segment))
return false;
PatternNodeWithChain = SDValue(LD, 0);
return true;
}
-bool X86DAGToDAGISel::SelectMOV64Imm32(SDValue N, SDValue &Imm) {
+bool X86DAGToDAGISel::selectMOV64Imm32(SDValue N, SDValue &Imm) {
if (const ConstantSDNode *CN = dyn_cast<ConstantSDNode>(N)) {
uint64_t ImmVal = CN->getZExtValue();
if ((uint32_t)ImmVal != (uint64_t)ImmVal)
return false;
- Imm = CurDAG->getTargetConstant(ImmVal, MVT::i64);
+ Imm = CurDAG->getTargetConstant(ImmVal, SDLoc(N), MVT::i64);
return true;
}
N->getOpcode() != ISD::TargetJumpTable &&
N->getOpcode() != ISD::TargetGlobalAddress &&
N->getOpcode() != ISD::TargetExternalSymbol &&
+ N->getOpcode() != ISD::MCSymbol &&
N->getOpcode() != ISD::TargetBlockAddress)
return false;
return TM.getCodeModel() == CodeModel::Small;
}
-bool X86DAGToDAGISel::SelectLEA64_32Addr(SDValue N, SDValue &Base,
+bool X86DAGToDAGISel::selectLEA64_32Addr(SDValue N, SDValue &Base,
SDValue &Scale, SDValue &Index,
SDValue &Disp, SDValue &Segment) {
- if (!SelectLEAAddr(N, Base, Scale, Index, Disp, Segment))
+ if (!selectLEAAddr(N, Base, Scale, Index, Disp, Segment))
return false;
SDLoc DL(N);
// Base could already be %rip, particularly in the x32 ABI.
Base = SDValue(CurDAG->getMachineNode(
TargetOpcode::SUBREG_TO_REG, DL, MVT::i64,
- CurDAG->getTargetConstant(0, MVT::i64),
+ CurDAG->getTargetConstant(0, DL, MVT::i64),
Base,
- CurDAG->getTargetConstant(X86::sub_32bit, MVT::i32)),
+ CurDAG->getTargetConstant(X86::sub_32bit, DL, MVT::i32)),
0);
}
"Expect to be extending 32-bit registers for use in LEA");
Index = SDValue(CurDAG->getMachineNode(
TargetOpcode::SUBREG_TO_REG, DL, MVT::i64,
- CurDAG->getTargetConstant(0, MVT::i64),
+ CurDAG->getTargetConstant(0, DL, MVT::i64),
Index,
- CurDAG->getTargetConstant(X86::sub_32bit, MVT::i32)),
+ CurDAG->getTargetConstant(X86::sub_32bit, DL,
+ MVT::i32)),
0);
}
return true;
}
-/// SelectLEAAddr - it calls SelectAddr and determines if the maximal addressing
+/// Calls SelectAddr and determines if the maximal addressing
/// mode it matches can be cost effectively emitted as an LEA instruction.
-bool X86DAGToDAGISel::SelectLEAAddr(SDValue N,
+bool X86DAGToDAGISel::selectLEAAddr(SDValue N,
SDValue &Base, SDValue &Scale,
SDValue &Index, SDValue &Disp,
SDValue &Segment) {
SDValue Copy = AM.Segment;
SDValue T = CurDAG->getRegister(0, MVT::i32);
AM.Segment = T;
- if (MatchAddress(N, AM))
+ if (matchAddress(N, AM))
return false;
assert (T == AM.Segment);
AM.Segment = Copy;
Complexity++;
// FIXME: We are artificially lowering the criteria to turn ADD %reg, $GA
- // to a LEA. This is determined with some expermentation but is by no means
+ // to a LEA. This is determined with some experimentation but is by no means
// optimal (especially for code size consideration). LEA is nice because of
// its three-address nature. Tweak the cost function again when we can run
// convertToThreeAddress() at register allocation time.
if (AM.hasSymbolicDisplacement()) {
- // For X86-64, we should always use lea to materialize RIP relative
- // addresses.
+ // For X86-64, always use LEA to materialize RIP-relative addresses.
if (Subtarget->is64Bit())
Complexity = 4;
else
if (Complexity <= 2)
return false;
- getAddressOperands(AM, Base, Scale, Index, Disp, Segment);
+ getAddressOperands(AM, SDLoc(N), Base, Scale, Index, Disp, Segment);
return true;
}
-/// SelectTLSADDRAddr - This is only run on TargetGlobalTLSAddress nodes.
-bool X86DAGToDAGISel::SelectTLSADDRAddr(SDValue N, SDValue &Base,
+/// This is only run on TargetGlobalTLSAddress nodes.
+bool X86DAGToDAGISel::selectTLSADDRAddr(SDValue N, SDValue &Base,
SDValue &Scale, SDValue &Index,
SDValue &Disp, SDValue &Segment) {
assert(N.getOpcode() == ISD::TargetGlobalTLSAddress);
AM.IndexReg = CurDAG->getRegister(0, MVT::i64);
}
- getAddressOperands(AM, Base, Scale, Index, Disp, Segment);
+ getAddressOperands(AM, SDLoc(N), Base, Scale, Index, Disp, Segment);
return true;
}
-bool X86DAGToDAGISel::TryFoldLoad(SDNode *P, SDValue N,
+bool X86DAGToDAGISel::tryFoldLoad(SDNode *P, SDValue N,
SDValue &Base, SDValue &Scale,
SDValue &Index, SDValue &Disp,
SDValue &Segment) {
!IsLegalToFold(N, P, P, OptLevel))
return false;
- return SelectAddr(N.getNode(),
+ return selectAddr(N.getNode(),
N.getOperand(1), Base, Scale, Index, Disp, Segment);
}
-/// getGlobalBaseReg - Return an SDNode that returns the value of
-/// the global base register. Output instructions required to
-/// initialize the global base register, if necessary.
-///
+/// Return an SDNode that returns the value of the global base register.
+/// Output instructions required to initialize the global base register,
+/// if necessary.
SDNode *X86DAGToDAGISel::getGlobalBaseReg() {
unsigned GlobalBaseReg = getInstrInfo()->getGlobalBaseReg(MF);
- return CurDAG->getRegister(GlobalBaseReg, TLI->getPointerTy()).getNode();
+ auto &DL = MF->getDataLayout();
+ return CurDAG->getRegister(GlobalBaseReg, TLI->getPointerTy(DL)).getNode();
}
/// Atomic opcode table
// an immediate operand to sub. However, it still fits in 32 bits for the
// add (since it is not negated) so we can return target-constant.
if (CNVal == INT32_MIN)
- return CurDAG->getTargetConstant(CNVal, NVT);
+ return CurDAG->getTargetConstant(CNVal, dl, NVT);
// For atomic-load-add, we could do some optimizations.
if (Op == ADD) {
// Translate to INC/DEC if ADD by 1 or -1.
CNVal = -CNVal;
}
}
- return CurDAG->getTargetConstant(CNVal, NVT);
+ return CurDAG->getTargetConstant(CNVal, dl, NVT);
}
// If the value operand is single-used, try to optimize it.
return Val;
}
-SDNode *X86DAGToDAGISel::SelectAtomicLoadArith(SDNode *Node, MVT NVT) {
+SDNode *X86DAGToDAGISel::selectAtomicLoadArith(SDNode *Node, MVT NVT) {
if (Node->hasAnyUseOfValue(0))
return nullptr;
SDValue Ptr = Node->getOperand(1);
SDValue Val = Node->getOperand(2);
SDValue Base, Scale, Index, Disp, Segment;
- if (!SelectAddr(Node, Ptr, Base, Scale, Index, Disp, Segment))
+ if (!selectAddr(Node, Ptr, Base, Scale, Index, Disp, Segment))
return nullptr;
// Which index into the table.
return CurDAG->getMergeValues(RetVals, dl).getNode();
}
-/// HasNoSignedComparisonUses - Test whether the given X86ISD::CMP node has
-/// any uses which require the SF or OF bits to be accurate.
-static bool HasNoSignedComparisonUses(SDNode *N) {
+/// Test whether the given X86ISD::CMP node has any uses which require the SF
+/// or OF bits to be accurate.
+static bool hasNoSignedComparisonUses(SDNode *N) {
// Examine each user of the node.
for (SDNode::use_iterator UI = N->use_begin(),
UE = N->use_end(); UI != UE; ++UI) {
return true;
}
-/// isLoadIncOrDecStore - Check whether or not the chain ending in StoreNode
-/// is suitable for doing the {load; increment or decrement; store} to modify
-/// transformation.
+/// Check whether or not the chain ending in StoreNode is suitable for doing
+/// the {load; increment or decrement; store} to modify transformation.
static bool isLoadIncOrDecStore(StoreSDNode *StoreNode, unsigned Opc,
SDValue StoredVal, SelectionDAG *CurDAG,
LoadSDNode* &LoadNode, SDValue &InputChain) {
return true;
}
-/// getFusedLdStOpcode - Get the appropriate X86 opcode for an in memory
-/// increment or decrement. Opc should be X86ISD::DEC or X86ISD::INC.
+/// Get the appropriate X86 opcode for an in-memory increment or decrement.
+/// Opc should be X86ISD::DEC or X86ISD::INC.
static unsigned getFusedLdStOpcode(EVT &LdVT, unsigned Opc) {
if (Opc == X86ISD::DEC) {
if (LdVT == MVT::i64) return X86::DEC64m;
llvm_unreachable("unrecognized size for LdVT");
}
-/// SelectGather - Customized ISel for GATHER operations.
-///
-SDNode *X86DAGToDAGISel::SelectGather(SDNode *Node, unsigned Opc) {
+/// Customized ISel for GATHER operations.
+SDNode *X86DAGToDAGISel::selectGather(SDNode *Node, unsigned Opc) {
// Operands of Gather: VSrc, Base, VIdx, VMask, Scale
SDValue Chain = Node->getOperand(0);
SDValue VSrc = Node->getOperand(2);
SDVTList VTs = CurDAG->getVTList(VSrc.getValueType(), VSrc.getValueType(),
MVT::Other);
+ SDLoc DL(Node);
+
// Memory Operands: Base, Scale, Index, Disp, Segment
- SDValue Disp = CurDAG->getTargetConstant(0, MVT::i32);
+ SDValue Disp = CurDAG->getTargetConstant(0, DL, MVT::i32);
SDValue Segment = CurDAG->getRegister(0, MVT::i32);
- const SDValue Ops[] = { VSrc, Base, getI8Imm(Scale->getSExtValue()), VIdx,
+ const SDValue Ops[] = { VSrc, Base, getI8Imm(Scale->getSExtValue(), DL), VIdx,
Disp, Segment, VMask, Chain};
- SDNode *ResNode = CurDAG->getMachineNode(Opc, SDLoc(Node), VTs, Ops);
+ SDNode *ResNode = CurDAG->getMachineNode(Opc, DL, VTs, Ops);
// Node has 2 outputs: VDst and MVT::Other.
// ResNode has 3 outputs: VDst, VMask_wb, and MVT::Other.
// We replace VDst of Node with VDst of ResNode, and Other of Node with Other
switch (Opcode) {
default: break;
+ case ISD::BRIND: {
+ if (Subtarget->isTargetNaCl())
+ // NaCl has its own pass where jmp %r32 are converted to jmp %r64. We
+ // leave the instruction alone.
+ break;
+ if (Subtarget->isTarget64BitILP32()) {
+ // Converts a 32-bit register to a 64-bit, zero-extended version of
+ // it. This is needed because x86-64 can do many things, but jmp %r32
+ // ain't one of them.
+ const SDValue &Target = Node->getOperand(1);
+ assert(Target.getSimpleValueType() == llvm::MVT::i32);
+ SDValue ZextTarget = CurDAG->getZExtOrTrunc(Target, dl, EVT(MVT::i64));
+ SDValue Brind = CurDAG->getNode(ISD::BRIND, dl, MVT::Other,
+ Node->getOperand(0), ZextTarget);
+ ReplaceUses(SDValue(Node, 0), Brind);
+ SelectCode(ZextTarget.getNode());
+ SelectCode(Brind.getNode());
+ return nullptr;
+ }
+ break;
+ }
case ISD::INTRINSIC_W_CHAIN: {
unsigned IntNo = cast<ConstantSDNode>(Node->getOperand(1))->getZExtValue();
switch (IntNo) {
case Intrinsic::x86_avx2_gather_q_d: Opc = X86::VPGATHERQDrm; break;
case Intrinsic::x86_avx2_gather_q_d_256: Opc = X86::VPGATHERQDYrm; break;
}
- SDNode *RetVal = SelectGather(Node, Opc);
+ SDNode *RetVal = selectGather(Node, Opc);
if (RetVal)
// We already called ReplaceUses inside SelectGather.
return nullptr;
case ISD::ATOMIC_LOAD_AND:
case ISD::ATOMIC_LOAD_OR:
case ISD::ATOMIC_LOAD_ADD: {
- SDNode *RetVal = SelectAtomicLoadArith(Node, NVT);
+ SDNode *RetVal = selectAtomicLoadArith(Node, NVT);
if (RetVal)
return RetVal;
break;
if (Opcode != ISD::AND && (Val & RemovedBitsMask) != 0)
break;
- unsigned ShlOp, Op;
+ unsigned ShlOp, AddOp, Op;
MVT CstVT = NVT;
// Check the minimum bitwidth for the new constant.
case MVT::i32:
assert(CstVT == MVT::i8);
ShlOp = X86::SHL32ri;
+ AddOp = X86::ADD32rr;
switch (Opcode) {
default: llvm_unreachable("Impossible opcode");
case MVT::i64:
assert(CstVT == MVT::i8 || CstVT == MVT::i32);
ShlOp = X86::SHL64ri;
+ AddOp = X86::ADD64rr;
switch (Opcode) {
default: llvm_unreachable("Impossible opcode");
}
// Emit the smaller op and the shift.
- SDValue NewCst = CurDAG->getTargetConstant(Val >> ShlVal, CstVT);
+ SDValue NewCst = CurDAG->getTargetConstant(Val >> ShlVal, dl, CstVT);
SDNode *New = CurDAG->getMachineNode(Op, dl, NVT, N0->getOperand(0),NewCst);
+ if (ShlVal == 1)
+ return CurDAG->SelectNodeTo(Node, AddOp, NVT, SDValue(New, 0),
+ SDValue(New, 0));
return CurDAG->SelectNodeTo(Node, ShlOp, NVT, SDValue(New, 0),
- getI8Imm(ShlVal));
+ getI8Imm(ShlVal, dl));
}
case X86ISD::UMUL8:
case X86ISD::SMUL8: {
}
SDValue Tmp0, Tmp1, Tmp2, Tmp3, Tmp4;
- bool foldedLoad = TryFoldLoad(Node, N1, Tmp0, Tmp1, Tmp2, Tmp3, Tmp4);
+ bool foldedLoad = tryFoldLoad(Node, N1, Tmp0, Tmp1, Tmp2, Tmp3, Tmp4);
// Multiply is commmutative.
if (!foldedLoad) {
- foldedLoad = TryFoldLoad(Node, N0, Tmp0, Tmp1, Tmp2, Tmp3, Tmp4);
+ foldedLoad = tryFoldLoad(Node, N0, Tmp0, Tmp1, Tmp2, Tmp3, Tmp4);
if (foldedLoad)
std::swap(N0, N1);
}
// Shift AX down 8 bits.
Result = SDValue(CurDAG->getMachineNode(X86::SHR16ri, dl, MVT::i16,
Result,
- CurDAG->getTargetConstant(8, MVT::i8)), 0);
+ CurDAG->getTargetConstant(8, dl, MVT::i8)),
+ 0);
// Then truncate it down to i8.
ReplaceUses(SDValue(Node, 1),
CurDAG->getTargetExtractSubreg(X86::sub_8bit, dl, MVT::i8, Result));
}
SDValue Tmp0, Tmp1, Tmp2, Tmp3, Tmp4;
- bool foldedLoad = TryFoldLoad(Node, N1, Tmp0, Tmp1, Tmp2, Tmp3, Tmp4);
+ bool foldedLoad = tryFoldLoad(Node, N1, Tmp0, Tmp1, Tmp2, Tmp3, Tmp4);
bool signBitIsZero = CurDAG->SignBitIsZero(N0);
SDValue InFlag;
// Special case for div8, just use a move with zero extension to AX to
// clear the upper 8 bits (AH).
SDValue Tmp0, Tmp1, Tmp2, Tmp3, Tmp4, Move, Chain;
- if (TryFoldLoad(Node, N0, Tmp0, Tmp1, Tmp2, Tmp3, Tmp4)) {
+ if (tryFoldLoad(Node, N0, Tmp0, Tmp1, Tmp2, Tmp3, Tmp4)) {
SDValue Ops[] = { Tmp0, Tmp1, Tmp2, Tmp3, Tmp4, N0.getOperand(0) };
Move =
SDValue(CurDAG->getMachineNode(X86::MOVZX32rm8, dl, MVT::i32,
ClrNode =
SDValue(CurDAG->getMachineNode(
TargetOpcode::EXTRACT_SUBREG, dl, MVT::i16, ClrNode,
- CurDAG->getTargetConstant(X86::sub_16bit, MVT::i32)),
+ CurDAG->getTargetConstant(X86::sub_16bit, dl,
+ MVT::i32)),
0);
break;
case MVT::i32:
ClrNode =
SDValue(CurDAG->getMachineNode(
TargetOpcode::SUBREG_TO_REG, dl, MVT::i64,
- CurDAG->getTargetConstant(0, MVT::i64), ClrNode,
- CurDAG->getTargetConstant(X86::sub_32bit, MVT::i32)),
+ CurDAG->getTargetConstant(0, dl, MVT::i64), ClrNode,
+ CurDAG->getTargetConstant(X86::sub_32bit, dl,
+ MVT::i32)),
0);
break;
default:
Result =
SDValue(CurDAG->getMachineNode(
TargetOpcode::SUBREG_TO_REG, dl, MVT::i64,
- CurDAG->getTargetConstant(0, MVT::i64), Result,
- CurDAG->getTargetConstant(X86::sub_32bit, MVT::i32)),
+ CurDAG->getTargetConstant(0, dl, MVT::i64), Result,
+ CurDAG->getTargetConstant(X86::sub_32bit, dl,
+ MVT::i32)),
0);
}
} else {
SDValue N1 = Node->getOperand(1);
if (N0.getOpcode() == ISD::TRUNCATE && N0.hasOneUse() &&
- HasNoSignedComparisonUses(Node))
+ hasNoSignedComparisonUses(Node))
N0 = N0.getOperand(0);
// Look for (X86cmp (and $op, $imm), 0) and see if we can convert it to
// For example, convert "testl %eax, $8" to "testb %al, $8"
if ((C->getZExtValue() & ~UINT64_C(0xff)) == 0 &&
(!(C->getZExtValue() & 0x80) ||
- HasNoSignedComparisonUses(Node))) {
- SDValue Imm = CurDAG->getTargetConstant(C->getZExtValue(), MVT::i8);
+ hasNoSignedComparisonUses(Node))) {
+ SDValue Imm = CurDAG->getTargetConstant(C->getZExtValue(), dl, MVT::i8);
SDValue Reg = N0.getNode()->getOperand(0);
// On x86-32, only the ABCD registers have 8-bit subregisters.
case MVT::i16: TRC = &X86::GR16_ABCDRegClass; break;
default: llvm_unreachable("Unsupported TEST operand type!");
}
- SDValue RC = CurDAG->getTargetConstant(TRC->getID(), MVT::i32);
+ SDValue RC = CurDAG->getTargetConstant(TRC->getID(), dl, MVT::i32);
Reg = SDValue(CurDAG->getMachineNode(X86::COPY_TO_REGCLASS, dl,
Reg.getValueType(), Reg, RC), 0);
}
// For example, "testl %eax, $2048" to "testb %ah, $8".
if ((C->getZExtValue() & ~UINT64_C(0xff00)) == 0 &&
(!(C->getZExtValue() & 0x8000) ||
- HasNoSignedComparisonUses(Node))) {
+ hasNoSignedComparisonUses(Node))) {
// Shift the immediate right by 8 bits.
SDValue ShiftedImm = CurDAG->getTargetConstant(C->getZExtValue() >> 8,
- MVT::i8);
+ dl, MVT::i8);
SDValue Reg = N0.getNode()->getOperand(0);
// Put the value in an ABCD register.
case MVT::i16: TRC = &X86::GR16_ABCDRegClass; break;
default: llvm_unreachable("Unsupported TEST operand type!");
}
- SDValue RC = CurDAG->getTargetConstant(TRC->getID(), MVT::i32);
+ SDValue RC = CurDAG->getTargetConstant(TRC->getID(), dl, MVT::i32);
Reg = SDValue(CurDAG->getMachineNode(X86::COPY_TO_REGCLASS, dl,
Reg.getValueType(), Reg, RC), 0);
if ((C->getZExtValue() & ~UINT64_C(0xffff)) == 0 &&
N0.getValueType() != MVT::i16 &&
(!(C->getZExtValue() & 0x8000) ||
- HasNoSignedComparisonUses(Node))) {
- SDValue Imm = CurDAG->getTargetConstant(C->getZExtValue(), MVT::i16);
+ hasNoSignedComparisonUses(Node))) {
+ SDValue Imm = CurDAG->getTargetConstant(C->getZExtValue(), dl,
+ MVT::i16);
SDValue Reg = N0.getNode()->getOperand(0);
// Extract the 16-bit subregister.
if ((C->getZExtValue() & ~UINT64_C(0xffffffff)) == 0 &&
N0.getValueType() == MVT::i64 &&
(!(C->getZExtValue() & 0x80000000) ||
- HasNoSignedComparisonUses(Node))) {
- SDValue Imm = CurDAG->getTargetConstant(C->getZExtValue(), MVT::i32);
+ hasNoSignedComparisonUses(Node))) {
+ SDValue Imm = CurDAG->getTargetConstant(C->getZExtValue(), dl,
+ MVT::i32);
SDValue Reg = N0.getNode()->getOperand(0);
// Extract the 32-bit subregister.
break;
SDValue Base, Scale, Index, Disp, Segment;
- if (!SelectAddr(LoadNode, LoadNode->getBasePtr(),
+ if (!selectAddr(LoadNode, LoadNode->getBasePtr(),
Base, Scale, Index, Disp, Segment))
break;
}
bool X86DAGToDAGISel::
-SelectInlineAsmMemoryOperand(const SDValue &Op, char ConstraintCode,
+SelectInlineAsmMemoryOperand(const SDValue &Op, unsigned ConstraintID,
std::vector<SDValue> &OutOps) {
SDValue Op0, Op1, Op2, Op3, Op4;
- switch (ConstraintCode) {
- case 'o': // offsetable ??
- case 'v': // not offsetable ??
- default: return true;
- case 'm': // memory
- if (!SelectAddr(nullptr, Op, Op0, Op1, Op2, Op3, Op4))
+ switch (ConstraintID) {
+ default:
+ llvm_unreachable("Unexpected asm memory constraint");
+ case InlineAsm::Constraint_i:
+ // FIXME: It seems strange that 'i' is needed here since it's supposed to
+ // be an immediate and not a memory constraint.
+ // Fallthrough.
+ case InlineAsm::Constraint_o: // offsetable ??
+ case InlineAsm::Constraint_v: // not offsetable ??
+ case InlineAsm::Constraint_m: // memory
+ case InlineAsm::Constraint_X:
+ if (!selectAddr(nullptr, Op, Op0, Op1, Op2, Op3, Op4))
return true;
break;
}
return false;
}
-/// createX86ISelDag - This pass converts a legalized DAG into a
-/// X86-specific DAG, ready for instruction scheduling.
-///
+/// This pass converts a legalized DAG into a X86-specific DAG,
+/// ready for instruction scheduling.
FunctionPass *llvm::createX86ISelDag(X86TargetMachine &TM,
CodeGenOpt::Level OptLevel) {
return new X86DAGToDAGISel(TM, OptLevel);